DOCSLIB.ORG

ANSYS, Inc. Installation Guide for Windows

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ANSYS, Inc. Installation Guide for Windows Installation Guide for Windows ANSYS, Inc. Release 16.2 Southpointe July 2015 2600 ANSYS Drive ANSYS, Inc. is Canonsburg, PA 15317 certified to ISO [email protected] 9001:2008. http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Revision Information The information in this guide applies to all ANSYS, Inc. products released on or after this date, until superseded by a newer version of this guide. This guide replaces individual product installation guides from previous releases. Copyright and Trademark Information © 2015 SAS IP, Inc. All rights reserved. Unauthorized use, distribution or duplication is prohibited. ANSYS, ANSYS Workbench, Ansoft, AUTODYN, EKM, Engineering Knowledge Manager, CFX, FLUENT, HFSS, AIM and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD is a trademark used by ANSYS, Inc. under license. CFX is a trademark of Sony Corporation in Japan. All other brand, product, service and feature names or trademarks are the property of their respective owners. Disclaimer Notice THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE CONFID- ENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The software products and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license agreement that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products and documentation may be used, disclosed, transferred, or copied only in accordance with the terms and conditions of that software license agreement. ANSYS, Inc. is certified to ISO 9001:2008. U.S. Government Rights For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use, duplication, or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc. software license agreement and FAR 12.212 (for non-DOD licenses). Third-Party Software See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software and third-party software. If you are unable to access the Legal Notice, please contact ANSYS, Inc. Published in the U.S.A. Table of Contents 1. Installation Prerequisites for Windows ................................................................................................... 1 1.1. System Prerequisites ......................................................................................................................... 3 1.1.1. CAD Support ............................................................................................................................ 4 1.2. Disk Space and Memory Requirements ............................................................................................. 6 1.3. Software Prerequisites ...................................................................................................................... 6 1.4. Requirements for the GPU Accelerator in Mechanical APDL ............................................................... 7 1.5. Additional Hardware and Software Requirements ............................................................................. 7 1.5.1. ANSYS AIM Requirements ........................................................................................................ 9 1.5.2. 3Dconnexion Product Support ................................................................................................. 9 1.6.Third-Party Software and other Security Considerations ..................................................................... 9 2. Platform Details .................................................................................................................................... 11 2.1. User Account Control (UAC) ............................................................................................................ 11 2.2. Utilizing CPU Hyperthreading Technology with ANSYS CFD Solvers .................................................. 13 2.3. Compiler Requirements for Windows Systems ................................................................................. 13 2.4. Select Your Installation .................................................................................................................... 14 3. Installing the ANSYS Software for a Stand-alone Windows System ..................................................... 15 3.1. Downloading the Installation Files ................................................................................................... 16 3.1.1. Installing from a USB Drive ..................................................................................................... 16 3.1.2. Installing from a DVD ............................................................................................................. 16 3.2. Installing ANSYS, Inc. Products ......................................................................................................... 17 3.2.1. Product Installation with Client Licensing ............................................................................... 17 3.2.1.1. Specifying CAD Configurations ...................................................................................... 20 3.2.2. ANSYS License Manager Installation ....................................................................................... 21 3.2.2.1. Registering the License Server ....................................................................................... 23 4. Installing the ANSYS Products and the License Manager on Different Windows Machines ................ 25 4.1. Downloading the Installation Files ................................................................................................... 26 4.1.1. Installing from a USB Drive ..................................................................................................... 26 4.1.2. Installing from a DVD ............................................................................................................. 27 4.2. Installing ANSYS, Inc. Products ......................................................................................................... 27 4.2.1. Product Installation with Client Licensing ............................................................................... 27 4.2.1.1. Network Server and Product Configuration .................................................................... 31 4.2.1.2. Specifying CAD Configurations ...................................................................................... 33 4.2.2. ANSYS License Manager Installation ....................................................................................... 34 4.2.2.1. Registering the License Server ....................................................................................... 35 5. Post-Installation Instructions ............................................................................................................... 37 5.1. Post-Installation Procedures for Mechanical APDL and ANSYS Workbench Products ......................... 38 5.1.1. Post-Installation Procedures for ANSYS CFX and ANSYS CFD-Post ............................................ 39 5.1.2. Post-Installation Procedures for ANSYS Fluent ......................................................................... 40 5.1.3. Post-Installation Procedures for ANSYS Polyflow ..................................................................... 40 5.1.4. Post-Installation Procedures for ICEM CFD ............................................................................... 40 5.1.5. Post-Installation Procedures for Other Products ...................................................................... 40 5.2. Launching ANSYS, Inc. Products ....................................................................................................... 41 5.3. Running the ANS_ADMIN Utility for Mechanical APDL /ANSYS Workbench Products ........................ 41 5.4. Product Localization ....................................................................................................................... 41 5.4.1.Translated Message File Installation for Mechanical APDL /ANSYS Workbench Products ........... 42 6. Installing the ANSYS, Inc. Product Help Documentation Only ............................................................. 43 7. Silent Mode Operations ........................................................................................................................ 45 7.1. Installing ANSYS, Inc. Products ......................................................................................................... 45 7.1.1. Silent Mode Operations .......................................................................................................... 45 7.1.1.1. Silent Product and License Manager Installation ............................................................. 46 Release 16.2 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. iii Windows Installation Guide 7.1.1.2. Silent Product Configuration/Unconfiguration ............................................................... 50 7.1.1.3. Silent Media Installation ................................................................................................
Load more

Recommended publications
  • Unified, Easy-To-Manage Endpoint Security
    Unified, Easy-to-Manage Endpoint Security Microsoft® Forefront™ Protect Business Continuity with Improved Management Client Security protects of Endpoint Security laptops, desktops, and file The release of the next generation of on Windows firewall activities. The agent servers with integrated Forefront client security protects business incorporates proven technologies already protection against laptops, desktops, and file servers against in use on millions of computers worldwide malware. It simplifies viruses, spyware, rootkits, and other and is backed by efficient and effective control of endpoint malware. The solution includes: threat response from the Microsoft security and provides n A single agent that provides antivirus Malware Protection Center. better visibility into the and antispyware protection, vulnerability Forefront Client Security is designed to overall protection of the assessment and remediation, and host simplify administration and save valuable environment. Defenses firewall management. time through its single management are easily managed from n A central management server that console and policy configuration, the Microsoft Forefront enables administrators to configure, central update infrastructure, and Management Console update, and report on agent activity automated endpoint discovery. It also code-named “Stirling.” across the enterprise. integrates with existing investments in Microsoft technologies. The two components work together to www.microsoft.com/ provide unmatched visibility and control To reduce risk,
    [Show full text]
  • Impact 360 Content Producer Installation and Upgrade Guide 5
    Content Producer Installation and Upgrade Guide Version 11.1 Document Revision 1.00 Confidential and Proprietary Information of Verint Systems Inc. 11/540,185; US 11/540,320; US 11/540,900; US 11/540,902; © 1992–2012 Verint Systems Inc. All Rights Reserved Worldwide. US 11/567,808; US 11/567,852; US 11/583,381; US Confidential and Proprietary Information of Verint Systems Inc. 11/608,340; US 11/608,350; US 11/608,358; US 11/616,490; US 11/621,134; US 11/691,530; US 11/692,983; US All materials (regardless of form and including, without 11/693,828; US 11/693,923; US 11/693,933; US 11/712,933; US 11/723,010; US 11/742,733; US 11/752,458; US limitation, software applications, documentation, and any other 11/776,659; US 11/824,980; US 11/831,250; US 11/831,257; information relating to Verint Systems, its products or services) are the exclusive property of Verint Systems Inc. Only expressly US 11/831,260; US 11/831,634; US 11/844,759; US 11/872,575; US 11/924,201; US 11/937,553; US 11/959,650; authorized individuals under obligations of confidentiality are US 11/968,428; US 12/015,375; US 12/015,621; US permitted to review materials in this document. By reviewing these materials, you agree to not disclose these materials to any 12/053,788; US 12/055,102; US 12/057,442; US 12/057,476; US 12/107,976; US 12/118,789; US 12/118,792; US third party unless expressly authorized by Verint Systems, and 12/164,480; US 12/245,781; US 12/326,205; US 12/351,370; to protect the materials as confidential and trade secret information.
    [Show full text]
  • User Manual TREK-722/723
    User Manual TREK-722/723 RISC All-In-One Mobile Data Terminal Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe- ments of the rights of third parties, which may result from its use. Acknowledgements TI and AM37x are trademarks of Texas Instruments.. Microsoft Windows is registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period.
    [Show full text]
  • Windows Server, System Center, and Forefront Pricing and Licensing Guide
    1 Comprehensive Resource for Licensing and Pricing Windows Server, System Center, and Forefront Licensing Guide Table of Contents What’s New in This Guide 2 Windows Server 2008 R2 Offerings 2 Windows Server 2008 R2 Licensing 5 General Windows Server Licensing Construct 5 Windows Server 2008 R2 Foundation 6 Windows Server 2008 R2 Standard 6 Windows Server 2008 R2 Enterprise 7 Windows Server 2008 R2 Datacenter 9 Windows Server 2008 R2 for Itanium-Based Systems 9 Windows Web Server 2008 R2 10 Windows HPC Server 2008 R2 10 Windows Server 2008 Client Access Licensing: Decision Trees, Types, and Modes 12 Remote Desktop Services Licensing Requirements 14 External Connector License Requirements for Windows Server 2008 15 Virtual Desktop Infrastructure Suites Licensing 16 System Center Offerings 18 System Center Licensing 19 General System Center Licensing Construct 19 System Center Server Management for Enterprise 20 System Center Client Management for Enterprise 24 System Center Server and Client Management for Midmarket 25 Enrollment for Core Infrastructure Licensing 26 Core Infrastructure Server Suites 27 Program Requirements 27 ECI Migration Paths 28 Pricing Tables and SKUs 30 Windows Server 30 System Center 34 Best Practices and Resources 35 Windows Server Licensing Scenarios 35 Windows Server Upgrade and Downgrade Options 37 Tracking Windows Server Licenses 40 Forefront 2010 Overview 43 Forefront 2010 Offerings 43 FF 2010 Management Product Offerings 43 Forefront 2010 Protection & Access Product Offerings 43 Forefront 2010 Licensing Overview
    [Show full text]
  • HTTP Client API for Jscript
    HTTP Client API for JScript Version 9.7 April 2015 This document applies to HTTP Client API for JScript Version 9.7. Specifications contained herein are subject to change and these changes will be reported in subsequent release notes or new editions. Copyright © 1999-2015 Software AG, Darmstadt, Germany and/or Software AG USA, Inc., Reston, VA, USA, and/or its subsidiaries and/or its affiliates and/or their licensors. The name Software AG and all Software AG product names are either trademarks or registered trademarks of Software AG and/or Software AG USA, Inc. and/or its subsidiaries and/or its affiliates and/or their licensors. Other company and product names mentioned herein may be trademarks of their respective owners. Detailed information on trademarks and patents owned by Software AG and/or its subsidiaries is located at http://softwareag.com/licenses. Use of this software is subject to adherence to Software AG's licensing conditions and terms. These terms are part of the product documentation, located at http://softwareag.com/licenses/ and/or in the root installation directory of the licensed product(s). This software may include portions of third-party products. For third-party copyright notices, license terms, additional rights or re- strictions, please refer to "License Texts, Copyright Notices and Disclaimers of Third-Party Products". For certain specific third-party license restrictions, please refer to section E of the Legal Notices available under "License Terms and Conditions for Use of Software AG Products / Copyright and Trademark Notices of Software AG Products". These documents are part of the product documentation, located at http://softwareag.com/licenses and/or in the root installation directory of the licensed product(s).
    [Show full text]
  • A Hybrid OS Cluster Solution
    Architect of an Open WorldTM A Hybrid OS Cluster Solution Dual-Boot and Virtualization with Windows HPC Server 2008 and Linux Bull Advanced Server for Xeon Published: June 2009 Dr. Patrice Calegari, HPC Application Specialist, BULL S.A.S. Thomas Varlet, HPC Technology Solution Professional, Microsoft The proof of concept presented in this document is neither a product nor a service offered by Microsoft or BULL S.A.S. The information contained in this document represents the current view of Microsoft Corporation and BULL S.A.S. on the issues discussed as of the date of publication. Because Microsoft and BULL S.A.S. must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft or BULL S.A.S., and Microsoft and BULL S.A.S. cannot guarantee the accuracy of any information presented after the date of publication. This White Paper is for informational purposes only. MICROSOFT and BULL S.A.S. MAKE NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS DOCUMENT. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation and BULL S.A.S. Microsoft and BULL S.A.S. may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document.
    [Show full text]
  • PERFORMANCE and SCALABILITY of WINDOWS HPC SERVER 2008 R2 Wenhao Wu, Sr
    PERFORMANCE AND SCALABILITY OF WINDOWS HPC SERVER 2008 R2 Wenhao Wu, Sr. Technical Product Manager, Microsoft Technical computing Agenda Microsoft’s Vision for HPC Windows HPC focuses on performance Windows Rivals Linux Performance on key HPC benchmarks State of the Art Windows HPC Benchmarking System Windows delivers high performance on standard benchmarks Windows Rivals Linux on major CAE applications Windows shows great scalability on Finance applications Microsoft’s Vision for HPC “Provide the platform, tools and broad ecosystem to reduce the complexity of HPC by making parallelism more accessible to address future computational needs.” Reduced Complexity Mainstream HPC Broad Ecosystem Performance! Address the performance Increase number of parallel Ease deployment for needs of traditional applications and codes larger scale clusters supercomputing Address emerging Offer choice of parallel Simplify management for cross-industry development tools, clusters of all scale computation trends languages and libraries Drive larger universe of Integrate with Enable non-technical users to end-users, developers, existing infrastructure harness the power of HPC and system administrators Windows HPC focuses on performance Windows Computer Windows HPC Server 2008 Windows HPC Server 2008 R2 Cluster Server 2003 •Windows Server 2003 •Windows Server 2008 •Windows Server 2008 R2 •Scale to 64 nodes •Scale to 256 nodes and beyond •Scale to 1000 nodes and beyond •MPI over Windows •MPI over NetworkDirect (RDMA •Further improvements in MPI Socket Direct
    [Show full text]
  • Esker Fax 5.0 — Technical Specifications
    DATASHEET Esker Fax 5.0 — Technical Specifications Supported formats Minimum requirements § Text Computer hardware § XML § Pentium® III 2 GHz CPU (3.2 GHz hyper-threaded, multi-core or multi- § PCL, PostScript (excluding bitmap fonts) processor recommended to use the Image Recognition module) § PDF (excluding bitmap fonts) § 3 GB RAM (or 4 GB if using Image Recognition) § Images (TIFF, JPEG, BMP, etc.) § 700 MB hard disk space for program installation + 2 GB for database, § Windows applications (Word, Excel, etc.) depending on expected volumes (20 GB recommended) § AFP § NTFS file system § RTF § Network interface card § EBCDIC text § Video card with 8 MB RAM for optimal performance Client applications Fax hardware § LanFax Manager — desktop client for Windows Vista, XP, 2000 § Dialogic® Brooktrout® TruFax® TR1034 Fax Board, or § LanFax Outlook client § Dialogic® Brooktrout® SR140 Fax Software, or § Document Manager — web-based .NET user interface (uses Microsoft § Dialogic® Diva® Board or .NET Framework v3.5) § TAPI modem class 1, 2, 2.0, or 2.1 Telephony communications Operating system* § Analog Loop Start § Windows Server® 2003 R2 or Windows Server 2003 SP2 (32-bit or 64-bit § Analog DID/DTMF Standard Edition, Enterprise Edition, or Datacenter Edition)*, or § Digital T1 (up to two T1 lines per server) § Windows Server 2008 (32-bit or 64-bit Standard Edition, Enterprise § ISDN BRI Edition, or Datacenter Edition)* § ISDN PRI (E1/T1) *With the latest Windows updates Enterprise fax capabilities Companion software § Esker DeliveryWare Rules
    [Show full text]
  • ATLAS.Ti 6 User's Guide and Reference
    ATLAS.ti 6 User Guide and Reference 2 ATLAS.ti 6 User Manual Copyright ©2011 by ATLAS.ti Scientific Software Development GmbH, Berlin. All rights reserved. Version: 339.20111116 Author: Dr. Susanne Friese (QUARC Consulting) Realization/Programming: Dr. Thomas G. Ringmayr (www.hypertexxt.com) Copying or duplicating this manual or any part thereof is a violation of applicable law. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including, but not limited to, photocopying, without written permission from ATLAS.ti GmbH. Trademarks: ATLAS.ti is a registered trademark of ATLAS.ti Scientific Software Development GmbH. Adobe Acrobat is a trademark of Adobe Systems Incorporated; Microsoft, Windows, Excel, and other Microsoft products referenced herein are either trademarks of Microsoft Corporation in the United States and/or in other countries. Google Earth is a trademark of Google, Inc. All other product names and any registered and unregistered trademarks mentioned in this document are used for identification purposes only and remain the exclusive property of their respective owners. ATLAS.ti 6 USER MANUAL 3 Contents About this Manual..................................................................................................................18 How to Use This Manual.................................................................................................................................................................18 Manual Conventions .......................................................................................................................................................................19
    [Show full text]
  • Altova Authentic 2021 Browser Edition
    Altova Authentic 2021 Browser Edition User & Reference Manual Altova Authentic 2021 Browser Edition User & Reference Manual All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher. Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks. While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document. Published: 2021 © 2015-2021 Altova GmbH Table of Contents 1 Introduction 6 1.1 Benefit.s.. ..o..f.. .A...u...t.h...e..n...t.i.c... .B....r.o...w....s..e...r.......................................................................................................... 7 1.2 How It W.....o...r..k..s.............................................................................................................................................. 8 1.3 Authen...t.i.c... .B....r.o...w....s..e...r.. .V...e...r.s...i.o...n..s............................................................................................................. 10 1.4 About ..T...h..i.s... .D....o...c..u...m....e...n...t.a...t.i.o...n............................................................................................................... 12 2 Server Setup 13 2.1 IIS: Co..n...f.i.g...u...r.i.n...g..
    [Show full text]
  • SPC-65 6.4” TFT LCD Smart Panel ® ® Computer with Intel Xscale CPU ® & Windows CE.5.0 Users Manual Copyright This Document Is Copyrighted, © 2006
    SPC-65 6.4” TFT LCD Smart Panel ® ® Computer with Intel Xscale CPU ® & Windows CE.5.0 Users Manual Copyright This document is copyrighted, © 2006. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties that may result from such use. Acknowledgements IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel® is trademark of Intel Corporation. Microsoft® Windows® CE 5.0 is a registered trademark of Microsoft Corp. All other product names or trademarks are properties of their respective owners. For more information on this and other Advantech products, please visit our websites at: http://www.advantech.com For technical support and service, please visit our support website at: http://eservice.advantech.com.tw/eservice/ This manual is for the SPC-65 series products. 1st. Edition: September 2006 FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy.
    [Show full text]
  • WASP3D Techspecs Videowall.Pdf
    WASP3D Solution - Video wall Hardware & Technical Specs VERSION 3.5 Minimum Hardware & Software Configuration for WASP3D – Video wall Solution: Processor: Minimum 6 Cores, @ 3.00 GHz, Cache: 15 MB 6 Cores: Intel Xeon E5-1650 v3 @ 3.50GHz; Intel Xeon E5-1660 v2 @ 3.70GHz; Intel Xeon E5-2643 v3 @ 3.40GHz. 8 Cores: Intel Xeon E5-1660 v3 @ 3.00GHz; Intel Xeon E5-1680 v2 @ 3.00GHz; Intel Xeon E5-1680 v3 @ 3.20GHz; Intel Xeon E5-2667 v2 @ 3.30GHz; Intel Xeon E5-2667 v3 @ 3.20GHz; Intel Xeon E5-2687W v2 @ 3.40GHz. 10 Cores: Intel Xeon E5-2687W v3 @ 3.10GHz; Intel Xeon E5-2690 v2 @ 3.00GHz. Core i7: Intel Core i7-5960X @ 3.00GHz; Intel Core i7-5930K @ 3.50GHz; Intel Core i7-5820K @ 3.30GHz. Motherboard: Choose a compatible Motherboard as per processor with Dual PCI-e x16 Slots (VGA and Video I/O Card) C602 /C612 Chipset and X99 Chipset (Core i7 Family). RAM: Minimum 8 GB. Hard Drive: SSD 240 GB or SATA III 6 Gbps 250 GB Graphic card: Nvidia GeForce GTX 980/ GTX 980Ti/GTX TITAN X SMPS: Minimum 650/850 Watt or above. (Consult with the Hardware supplier) Monitor: Recommended 24” 1920 X 1080 Supported screen. Branded Systems: Windows 10 Pro/Ent. 64 Bit or Windows 7 Pro /Ent. 64 Bit-SP1 • HP Z440 with Intel Xeon E5-1650 v3 3.5 or Higher + 8 GB RAM + Graphics card GTX 980/GTX 980Ti. • HP Z640 with Intel Xeon E5-1650 v3 3.5 or Higher + 8 GB RAM + Graphics card GTX 980/GTX 980Ti.
    [Show full text]