DOCSLIB.ORG

Possible Hazards for CHEM 105 General Chemistry 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Possible Hazards for CHEM 105 General Chemistry 1 Possible Hazards for CHEM 105 General Chemistry 1 This list of substances represents the possible hazards currently identified for this course; however, substitutions or additions are possible. Do not assume a substance is safe if it is not listed. You will be notified of changes as soon as they are available. If you are aware of any known allergies or sensitivities to chemicals, please let your professor know prior to the first lab class. Marble chips Sulfuric acid 6M Hydrochloric acid Methanol 1M Hydrochloric acid Sodium chloride Magnesium metal Calcium chloride Manganese dioxide Barium chloride Hydrogen peroxide solution 6% Sodium carbonate Zinc metal Copper nitrate Silver metal Copper chloride Copper metal Calcium sulfate Steel wool Nitric acid Magnesium nitrate Acetic acid Zinc nitrate Sucrose Iron sulfate Urea Copper sulfate Citric acid Silver nitrate Phosphoric acid Ammonium chloride Sodium acetate Barium chloride Ammonium hydroxide Sodium nitrate Phenolphthalein Sodium sulfate Acetone Sodium bicarbonate 4% Polyvinyl Alcohol Cobalt Nitrate 5% Borax Lithium Chloride Hexamethylenedamine Potassium Iodide Liquid latex Strontium chloride Potassium Nitrate Complete List of Chemicals These chemicals are stored in an adjacent area. Any of these chemicals could be used for another course in the same lab room but at a different time. Exposure is possible but not probable. Ammonium Bicarbonate Acetanilide Ammonium Chloride Acetic Acid, Glacial Ammonium Dichromate Acetic Acid, 0.01M, 0.1M, 1M Ammonium Hydroxide Acetic Anhydride Ammonium Nitrate Acetone Ammonium Nitrate, 0.1M Acrylic Acid Ammonium Oxalate Monohydrate Adhesive Side Powder, Dark Ammonium Persulfate Albumin, Egg Amyl Alcohol Alka-Seltzer Argon Spectrum Tubes All-Purpose Cleaner Arsenic Trioxide Aluminum (Foil) Ascorbic Acid (Vitamin C) Aluminum (Wire) Aspirin (Acetylsalicylic Acid) Aluminum Nitrate – 9-hydrate Barium Chloride-anhydrous Aminobenzoic Acid, 3- Barium Chloride-2-hydrate Ammonia (household) Barium Hydroxide – Anhydrous Ammonia Tablets #1, #2 Barium Hydroxide – 8-hydrate Ammonium Acetate Barium Nitrate Ammonium Acetate, 0.1M Basic Yellow Copper(II) Chloride–2-hydrate Benzil Copper(II) Nitrate–2½-hydrate Benzoic Acid Copper(II) Sulfate–Anhydrous Benzophenone Copper(II) Sulfate–5-hydrate Bleach Cyanoacrylate Bogen Universal Indicator Cyclohexane Boiling Chips, pumice Cyclohexanol Cyclohexanone Boric Acid Cyclohexene Boric Acid, 0.1M Deet (N,N-diethyl-m-toluamide) Brass Dessicant Bromcresol Green Indicator Dichlorobenzene-p (PDB) Bromoethane (Ethyl Bromide) Diethyl Ether, anhydrous (Ether) Bromothymol Blue Diethylamine Buffer solutions, pH4,pH7,pH10 Dimethoxybenzaldehyde, 3,4- Butyl Alcohol-n Dimethylformamide, N,N- Butyl Alcohol-tert Dimethylglyoxime Caffeine Dinitrobenzoic Acid-3,5 Caffeine Diphenylaminesulfonic Acid Calcium Granules Dodecyl Alcohol Calcium Turnings EDTA Calcium Acetate Ethyl Acetate Calcium Carbonate Ethyl Alcohol Calcium Chloride – Anhydrous Ethyl Alcohol, 95% Calcium Chloride – 2-hydrate Ethyl Bromide (Bromoethane) Calcium Hydroxide (Lime) Ethylenediamine Calcium Nitrate – 4-hydrate Ferric Tartrate Calcium Oxide Fluorene Calcium Sulfate – 2-hydrate Formaldehyde Camphor-dl Formic Acid Carbon (Charcoal) Fructose Casein Furfural Casting Plaster– Footprint Gallium Catechol (Pyrocatechol) Glass Beads Celite (Diatomaceous Earth) Glycerin Chlorobeneze Gold Chlorobenzoic Acid-p Helium Spectrum Tubes Chloroform Hexamethylenediamine Chromium Tablet Hexanes Citric Acid – Anhydrous Hydrochloric Acid Club Soda (Carbonic Acid) Hydrogen Spectrum Tubes Cobalt Chloride – 6-hydrate Hydrogen Peroxide, 3% Cobalt Nitrate – 6-hydrate Hydrogen Peroxide, 30% Congo Red Indanone, 1- Copper solid Iodine solid Naphthalene Iodine Solution Neon Spectrum Tubes Iodine Spectrum Tubes Nickel (II) Chloride – 6-hydrate Iodoacetophenone, 4’ Nickel Nitrate – 6-hydrate Iodophenol, 4 Ninhydrin – monohydrate Ninhydrin Spray Iron (Filings) Nitric Acid Iron (III) Chloride – 6-hydrate Nitrogen Spectrum Tubes Iron (III) Nitrate – 9-hydrate Oleic Acid Iron (II) Sulfate – 7-hydrate Oxalic Acid Iron (II) Sulfide – Anhydrous Oxygen Spectrum Tubes Isoamyl Alcohol Palladium (II) Chloride Iso-butanol Phenol Isopropyl Alcohol Phenolphthalein Krypton Spectrum Tubes Phenylboronic Acid Latent Print Powder, Magnetic Phosphoric Acid Latent Print Powder, Silk Black Phthalic Acid Latex liquid Phthalic anhydride Lead Polyvinyl Alcohol Lead Chloride Potassium Acid Phthalate Lead Nitrate Potassium Bromide Lithium Chloride Potassium Carbonate – anhydrous Lycopodium Potassium Chlorate Lye (Sodium Hydroxide) Potassium Chloride Magnesium Metal Ribbon Magnesium Chloride – 6- Potassium Chromate hydrate Potassium Citrate – Manganese Sulfate Monohydrate monohydrate Potassium Dichromate Magnesium Sulfate – Potassium Ferrocyanide– anhydrous 3hydrate Malonic Acid Potassium Hydroxide Manganese Chloride–4-hydrate Potassium Iodate Manganese Dioxide Potassium Iodide Manganese Sulfate Potassium Nitrate monohydrate Potassium Oxalate– Mercury Spectrum Tubes Monohydrate Methyl Alcohol (Methanol) Potassium Permanganate Methyl Ethyl Ketone Potassium Phosphate– Monobasic Methyl Formate Potassium Thiocyanate Methyl Orange Sodium Salt Propyl Alcohol-n Methyl Orange Indicator Pyrocatechol (Catechol) Methylene Chloride Salicylamide MIKROSIL Casting Compound Salicylic Acid MIKROSIL Catalyst Sebacoyl Chloride Molybdic Acid Silver Silver Nitrate Tin (II) Chloride – 2-hydrate Small Particle Reagent, Dark Toluene Sodium Acetate – Anhydrous Toluic Acid-m Sodium Acetate – 3-hydrate Toluic Acid-p Sodium Bicarbonate Trichloroethylene Sodium Bisulfate Urea Sodium Bisulfite Vanillin Sodium Borohydride Vegetable Oil Sodium Bromide Xenon Spectrum Tubes Sodium Carbonate–Anhydrous Xylene Octyl Alcohol Zinc solid Sodium Carbonate– Zinc Chloride Monohydrate Zinc Nitrate – 6-hydrate Sodium Chloride Sodium Dichromate – Dihydrate Sodium Hydroxide Sodium Iodide Sodium Nitrate Sodium Nitrite Sodium Phosphate Monohydrate Sodium Phosphate 7-hydrate Sodium Phosphate 12-hydrate Sodium Sulfate Anhydrous Sodium Sulfate 10-hydrate Sodium Sulfide 9-hydrate Sodium Sulfite Anhydrous Sodium Tetraborate (Borax) Sodium Thiosulfate Anhydrous Starch, Potato Steel Shots Strontium Chloride – 6-hydrate Strontium Nitrate Sucrose Updated: August 23, 2019 ss Sulfur, Flowers of (sublimed) Sulfuric Acid Tannic Acid Thiamine Hydrochloride Thioacetamide Thyionyl Chloride Tin solid Updated: August 23, 2019 ss .
Load more

Recommended publications
  • Unit: Stoichiometry Lesson: #10 Topics: Solvay Process
    Unit: Stoichiometry Lesson: #10 Topics: Solvay Process The Solvay Process: A Case Study Many important industrial processes involve chemical reactions that are difficult to perform and still be economically feasible. In some cases, the overall process must follow a series of reaction steps. Sodium carbonate is a chemical that is needed in large amounts – it is used in the production of glass and soap. Historically, sodium carbonate was produced by burning plants or coal and mixing the ashes with water This method was both inefficient and very expensive because of the large amount of material that needed to be burned. The Solvay process was developed as a cost effective alternative. It involves a series of reaction steps and has a net reaction of: CaCO3 (s) + 2 NaCl (aq) Na2CO3 (aq) + CaCl2 (aq) A net reaction is determined by looking at the various reaction steps and eliminating any chemical that appears as both a reactant and a product in the various steps. These chemicals are known as intermediates. Step 1: Calcium carbonate (limestone) is decomposed by heat to form calcium oxide (lime) and carbon dioxide. CaCO3 (s) CaO (s) + CO2 (g) Step 2: Carbon dioxide reacts with aqueous ammonia and water to form aqueous ammonium hydrogen carbonate. CO2 (g) + NH3 (aq) + H2O (l) NH4HCO3 (aq) Step 3: The aqueous ammonium hydrogen carbonate reacts with sodium chloride to produce ammonium chloride and solid baking soda. NH4HCO3 (aq) + NaCl (aq) NH4Cl (aq) + NaHCO3 (s) Step 4: The baking soda is heated up and decomposed into sodium carbonate, water vapor and carbon dioxide. 2 NaHCO3 (s) Na2CO3 (s) + H2O (g) + CO2 (g) Step 5: The lime that was produced in the first step is mixed with water to produce slaked lime (calcium hydroxide).
    [Show full text]
  • Chemicals Used for Chemical Manufacturing Page 1 of 2
    Chemicals used for Chemical Manufacturing Page 1 of 2 Acetic Acid (Glacial, 56%) Glycol Ether PMA Acetone Glycol Ether PNB Acrylic Acid Glycol Ether PNP Activated Carbon Glycol Ether TPM Adipic Acid Glycols Aloe Vera Grease Aluminum Stearate Gum Arabic Aluminum Sulfate Heat Transfer Fluids Amino Acid Heptane Ammonium Acetate Hexane Ammonium Bicarbonate Hydrazine Hydrate Ammonium Bifluoride Hydrochloric Acid (Muriatic) Ammonium Chloride Hydrogen Peroxide Ammonium Citrate Hydroquinone Ammonium Hydroxide Hydroxylamine Sulfate Ammonium Laureth Sulfate Ice Melter Ammonium Lauryl Sulfate Imidazole Ammonium Nitrate Isobutyl Acetate Ammonium Persulfate Isobutyl Alcohol Ammonium Silicofluoride Calcium Stearate Dipropylene Glycol Isopropanolamine Ammonium Sulfate Carboxymethylcellulose Disodium Phosphate Isopropyl Acetate Antifoams Caustic Potash D'Limonene Isopropyl Alcohol Antifreeze Caustic Soda (All Grades) Dodecylbenzene Sulfonic Acid Isopropyl Myristate Antimicrobials Caustic Soda (Beads, Prills) (DDBSA) Isopropyl Palmitate Antimony Oxide Cetyl Alcohol Dowfrost Itaconic Acid Aqua Ammonia Cetyl Palmitate Dowfrost HD Jojoba Oil Ascorbic Acid Chlorine, Granular Dowtherm SR-1 Keratin Barium Carbonate Chloroform Dowtherm 4000 Lactic Acid Barium Chloride Chromic Acid EDTA Lanolin Beeswax Citric Acid (Dry and Liquid) EDTA Plus Lauric Acid Bentonite Coal Epsom Salt Lauryl Alcohol Benzaldehyde Cocamide DEA Ethyl Acetate Lecithin Benzoic Acid Copper Nitrate Ethyl Alcohol (Denatured) Lime Benzyl Alcohol Copper Sulfate Ethylene Glycol Linoleic Acid Bicarbonate
    [Show full text]
  • The Reaction of Calcium Chloride with Carbonate Salts
    The Reaction of Calcium Chloride with Carbonate Salts PRE-LAB ASSIGNMENT: Reading: Chapter 3 & Chapter 4, sections 1-3 in Brown, LeMay, Bursten, & Murphy. 1. What product(s) might be expected to form when solid lithium carbonate is added to an aqueous solution of calcium chloride? Write a balanced chemical equation for this process. 2. How many grams of lithium carbonate would you need to fully react with one mole of calcium chloride? Please show your work. INTRODUCTION: The purpose of this lab is to help you discover the relationships between the reactants and products in a precipitation reaction. In this lab you will react a calcium chloride solution with lithium carbonate, sodium carbonate, or potassium carbonate. The precipitate that results will be filtered and weighed. In each determination you will use the same amount of calcium chloride and different amounts of your carbonate salt. This experiment is a "discovery"- type experiment. The procedure will be carefully described, but the analysis of the data is left purposely vague. You will work in small groups to decide how best to work up the data. In the process you will have the chance to discover some principles, to use what you have learned in lecture, and to practice thinking about manipulative details and theory at the same time. Plotting your data in an appropriate manner should verify the identity of the precipitate and clarify the relationship between the amount of carbonate salt and the yield of precipitate. Predicting the formulas of ionic compounds. Compounds like calcium chloride (CaCl2) and sodium carbonate (Na2CO3) are ionic substances.
    [Show full text]
  • Ammonium Nitrate
    SAFETY DATA SHEET Ammonium Nitrate ABN: 81 008 668 371 Section 1 – Identification of the Material and Supplier Product Name Ammonium nitrate Other names LDAN, TGAN, EGAN, porous prill. Company product code 1825. Recommended use Blasting agent, explosive manufacture, and fertiliser manufacture. Company name CSBP Limited Address State Postcode Kwinana Beach Road, KWINANA Western Australia 6167 Telephone number Emergency telephone number (08) 9411 8777 (Australia), +61 8 9411 8777 (Overseas) 1800 093 333 (Australia), +61 8 9411 8444 Section 2 – Hazard Identification Hazard Classification, including a statement of overall hazardous nature HAZARDOUS SUBSTANCE Ammonium nitrate is classified as hazardous according to Australian WHS Regulations. DANGEROUS GOODS Ammonium nitrate is classified for physicochemical hazards and specified as dangerous in the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code), 7th Edition INTERNATIONAL MARITIME DANGEROUS GOODS CODE (IMDG) Ammonium nitrate is classified for physicochemical hazards and specified as dangerous in the IMDG Code, 2014 Edition. GHS Classification(s) Oxidising Solids: Category 3 Acute Toxicity: Oral: Category 5 Serious Eye Damage / Eye Irritation: Category 2A Label elements Signal word WARNING Pictogram(s) Hazard statement(s) H272 May intensify fire (oxidizing agent). H303 May be harmful if swallowed. H319 Causes serious eye irritation. AUH044 Risk of explosion if heated under confinement. AUH031 Contact with acids liberates toxic gas. Prevention statement(s) P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P220 Keep/store away from clothing/incompatible materials/combustible materials. P221 Take any precaution to avoid mixing with combustibles/incompatible materials. CSBP-IF1875 Version No. 11.0.0 Page 1 of 10 Document last modified: 14 August 2017.
    [Show full text]
  • Effects of Different Sources of Fertilizer Nitrogen on Growth and Nutrition of Western Hemlock Seedlings
    Effects of Different Sources U.S. Department of Agriculture Forest Service Pacific Northwest Forest of FertiIizer Nitrogen and Range Experiment Station Research Paper PNW-267 on Growth and Nutrition oJ February 1980 Western Hemlock Seedlings ---. --_. ------------------------ , I _J Authors M. A. RADWAN is Principal Plant Physiologist and DEAN S. DeBELL is Principal Silviculturist with the Forest Service, u.S. Department of Agriculture, Pacific Northwest Forest and Range Experiment Station, Forestry Sciences Laboratory, Olympia, Washington. En gl ish Equivalents 1 liter 0.2642 gallon 1 kilogram = 2.2046 pound 1 gram = 0.0353 ounce 1 centimeter = 0.3937 inch 1 kilogram per hectare 1.1206 pounds per acre (9/50C) + 32 = of EFFECTS OF DIFFERENT SOURCES OF FERTILIZER NITROGEN ON GROWTH AND NUTRITION OF WESTERN HEMLOCK Reference Abstract Radwan, M. A. , and Dean S. DeBell. 1980. Effects of different sources of fertilizer nitrogen on growth and nutrition of western hemlock seedlings. USDA For. Servo Res. Pap. PNW-267, 15 p. Pacific Northwest Forest and Range Experiment Station, Portland, Oregon. Twelve different nitrogen (N) fertilizer treatments were tested on potted western hemlock (Tsuga heterophylla (Raf. ) Sarg.) seedlings. Fertilizers affected soil N and pH, and growth and foliar chemical com­ position of seedlings. Ura plus N-Serve and sulfur-coated urea appear more promising for promoting growth than other fertilizers tested. Results, however, do not explain reported variability in response of hemlock stands to N fertilization. Keywords: Nitrogen fertilizer response, seedling growth, western hemlock, Tsuga heterophylla. RESEARCH SUMMARY Research Paper PNW-267 1980 The following fertilization treatments were applied in the spring to potted, 4-year-old western hemlock (Tsuga heterophylla (Raf.
    [Show full text]
  • Phosphate-Based Treatments for Conservation of Stone
    RILEM Technical Letters (2017) 2: 14‐19 DOI: http://dx.doi.org/10.21809/rilemtechlett.2017.34 Phosphate‐based treatments for conservation of stone Enrico Sassoni a* a Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Via Terracini 28, 40131, Bologna, Italy Received: 30 May 2017 / Accepted: 09 August 2017 / Published online: 9 October 2017 © The Author(s) 2017. This article is published with open access and licensed under a Creative Commons Attribution 4.0 International License. Abstract To overcome the limitations of currently available protectives and consolidants for carbonate stones (such as marble and limestone), in 2011 the use of calcium phosphate was proposed. The idea is forming calcium phosphates (ideally hydroxyapatite) as the reaction product between the substrate and an aqueous solution of a phosphate salt that the stone is treated with. In this paper, the studies aimed at identifying the best treatment conditions (in terms of nature and concentration of the phosphate precursor, solution pH, reaction time, ionic and organic additions) are first briefly summarized. Then, the efficacy of the phosphate treatment in protecting marble from dissolution in rain and restoring cohesion of weathered marble and limestone is discussed. Some recent studies on the use of the phosphate treatment on alternative substrates and some future steps for research on the topic are finally outlined. Keywords: Cultural heritage; Marble; Hydroxyapatite; Protection; Consolidation 1 Introduction improve mechanical properties, by providing a binding action between the stone grains. Organic products are A great part of cultural heritage objects (e.g. monuments, effective in improving mechanical properties, but again architectural decorations and statues) is made of carbonate they lack compatibility and durability.
    [Show full text]
  • Sodium Laurilsulfate Used As an Excipient
    9 October 2017 EMA/CHMP/351898/2014 corr. 1* Committee for Human Medicinal Products (CHMP) Sodium laurilsulfate used as an excipient Report published in support of the ‘Questions and answers on sodium laurilsulfate used as an excipient in medicinal products for human use’ (EMA/CHMP/606830/2017) * Deletion of the E number. Please see the corrected Annex for further details. 30 Churchill Place ● Canary Wharf ● London E14 5EU ● United Kingdom Telephone +44 (0)20 3660 6000 Facsimile +44 (0)20 3660 5555 Send a question via our website www.ema.europa.eu/contact An agency of the European Union © European Medicines Agency, 2018. Reproduction is authorised provided the source is acknowledged. Sodium laurilsulfate used as an excipient Table of contents Executive summary ..................................................................................... 3 Introduction ................................................................................................ 4 Scientific discussion .................................................................................... 4 1. Characteristics ....................................................................................... 4 1.1 Category (function) ............................................................................................. 4 1.2 Properties........................................................................................................... 4 1.3 Use in medicinal products ..................................................................................... 5 1.4 Regulatory
    [Show full text]
  • STUDENTS 2 SCIENCE Virtual Lab Experiment Precipitates
    STUDENTS 2 SCIENCE Virtual Lab Experiment Precipitates An investigation of solubility and precipitation. A classroom Experiment in Kit Form for Grades 9-12 Brief Background: Students will learn the difference between reaction precipitates like the precipitation of Basic copper carBonate from the reaction of copper chloride and sodium carBonate and those that result solely from a change in solution soluBility (water vs. isopropanol). They will learn aBout precipitation in water treatment and purification and aBout the scientists who work to provide or maintain clean water for us. Additionally, students will learn that precipitates can sometimes Be redissolved By adding another chemical compound and thus carrying out an additional chemical reaction. Safety Students and teachers must wear properly fitting goggles as they prepare for, conduct, and clean up from the activities in the kit. Read and follow all safety warnings. Also review the Materials Safety Data Sheets. Students must wash their hands with soap and water after the activities. The activities described in this kit are intended for students under the direct supervision of teachers. Student kit packaged as 13 individual units for a class size of 26. Each student package is shared by 2 students. Items in each 2-student Ziploc bag: • (1) vial labeled “CuSO4” approximately 1/4 filled with cupric sulfate • (1) empty vial laBeled “CuSO4 Solution” • (1) 4-mL vial laBeled “CaCl2” containing small amount calcium chloride • (1) vial labeled “NaHCO3” (in red lettering) approximately 1/3
    [Show full text]
  • CASE STUDY Methane Recovery at Non-Coal Mines
    CASE STUDY Methane Recovery at Non-coal Mines Background Existing methane recovery projects at non-coal mines reduce greenhouse gas (GHG) emissions by up to 3 million tons of carbon dioxide equivalent (CO₂e). Although methane emissions are generally associated with coal mines, methane is also found in salt, potash, trona, diamond, gold, base metals, and lead mines throughout the world. Many of these deposits are located adjacent to hydrocarbon (e.g., coal and oil) deposits where methane originates. Consequently, during the process of mining non-coal deposits, methane may be released. Overview of Methane Recovery Projects Beatrix Gold Mine, South Africa Promethium Carbon, a carbon and climate change advisory firm, has developed a project to capture and use methane from the Beatrix Gold Mine in Free State, South Africa (see box). Project Specifications: Beatrix Gold Mine Name Capture and Utilization of Methane at the Gold Fields–owned Beatrix Mine in South Africa Site Free State Province, South Africa Owner Gold Fields Ltd., Exxaro On-site Pty Ltd. Dates of Operation May 2011–present Equipment Phase 1 • GE Roots Blowers • Trolex gas monitoring systems • Flame arrestor • 23 burner flare Equipment Phase 2 Addition of internal combustion engines End-use Phase 1 Destruction through flaring End-use Phase 2 4 MW power generation Emission Reductions 1.7 million tons CO²e expected over CDM project lifetime (through 2016) Commissioning of Flare at Beatrix Gold Mine (Photo courtesy of Gold Fields Ltd.) CASE STUDY Methane Recovery at Non-coal Mines ABUTEC Mine Gas Incinerator at Green River Trona Mine (Photo courtesy of Solvay Chemicals, Inc.) Green River Trona Mine, United States Project Specifications: Green River Trona Mine Trona is an evaporite mineral mined in the United States Name Green River Trona Mine Methane as the primary source of sodium carbonate, or soda ash.
    [Show full text]
  • Chemistry Inventory; Fall
    CHEMISTRY FALL 2005 MSDS Mfg.'s Name Chemical Name Quantity Stored Storage Conditions (on file = 9) Aluminum 9 1.5 kg Aluminum chloride, anhydrous, 98.5% 9 0.2 kg Aluminum chloride · 6H2O 9 0.5 kg Aluminum hydroxide 9 0.5 kg Aluminum nitrate 9 0.5 kg Aluminum sulfate 9 0.5 kg Ammonia, concentrated 9 4.0 L Ammonium acetate 9 0.2 kg Ammonium chloride 9 Ammonium dihydrogen phosphate (monobasic) 9 0.4 kg J.T. Baker Ammonium hydrogen phosphate (dibasic) No 0.5 kg Ammonium nitrate 9 2.5 kg Ammonium oxalate 9 0.7 kg Ammonium peroxydisulfate 9 0.5 kg Ammonium sulfate 9 0.2 kg Antimony 9 0.4 kg Barium chloride, anhydrous 9 2.5 kg Barium chloride · 2H2O 9 2.5 kg Barium nitrate 9 0.8 kg Bismuth 9 2.0 kg Boric Acid 9 0.4 kg Brass 9 Bromine 9 2.5 kg Cadmium 9 0.1 kg Cadmium nitrate 9 0.3 kg Calcium acetate · xH2O 9 0.5 kg Calcium carbide 9 1.0 kg Calcium carbonate 9 2.2 kg Calcium chloride 9 1.0 kg Calcium hydroxide 9 0.3 kg Calcium nitrate · 4H2O 9 1.0 kg Calcium oxide 9 0.3 kg Calcium sulfate · 2H2O 9 1.0 kg Carbon 9 0.1 kg Ceric ammonium nitrate 9 0.5 kg Cesium chloride 9 0.01 kg Chromium 9 0.01 kg Chromium chloride 9 0.5 kg Chromium nitrate 9 0.5 kg Cobalt 9 0.025 kg Cobalt chloride 9 0.7 kg Cobalt nitrate 9 0.6 kg Copper (assorted) 9 4.0 kg Copper acetate 9 0.05 kg Copper chloride 9 0.1 kg Copper nitrate 9 3.5 kg Copper oxide 9 0.4 kg Cupric sulfate, anhydrous 9 0.5 kg Cupric sulfate · 5H2O 9 2.75 kg EDTA 9 0.6 kg Iodine 9 2.0 kg Iron (assorted) 9 5.0 kg MSDS Mfg.'s Name Chemical Name Quantity Stored Storage Conditions (on file = 9) Ferric ammonium
    [Show full text]
  • Understanding of the Mechanisms of Chemical Incompatibility of Ammonium Nitrate by Molecular Modeling
    Understanding of the mechanisms of chemical incompatibility of ammonium nitrate by molecular modeling Stefania Cagnina Summary The serious potential consequences of the hazards posed by chemical incompatibility, especially in a large-scale industrial environment, provide motivation for a deeper understanding of the mechanisms of the reactions involved in these phenomena. In this PhD work, two incompatibilities of ammonium nitrate were studied by molecular modeling. Results, in qualitative agreement with the calorimetric experiments, show the potential of the modern computational approaches to establish a clear link between microscopic (molecular) description and macroscopic effects of incompatibilities. Problem addressed Numerous chemical reactants, whenever placed in contact with other products or materials, tend to lead to undesired chemical incompatibility phenomena. Ammonium nitrate (NH4NO3, AN), widely used in the chemical industry as fertilizer component and as an ingredient in explosive mixtures, is known for its long list of incompatibilities (as metals, halides, and organics) [1] and often involved in major accidents (Toulouse, 2001). Indeed, such incompatibilities are known to reduce the runaway temperatures and sometimes increase the reaction enthalpies. In order to prevent the occurrence of those phenomena, which can lead to particularly dangerous situations in an industrial environment, a rapid and accurate identification of the incompatibilities is needed. Until now, experimental studies, Safety Data Sheets (SDSs), chemical compatibility charts and software were the only possible approaches used to study and prevent incompatibilities. Despite their undeniable utility, these methods do not explain exactly how the incompatibility drives the undesired reaction scheme, in terms of thermodynamic data. Therefore, complementary to these approaches, molecular modeling was used in this PhD work to ensure a deeper understanding.
    [Show full text]
  • Crystals of an Insoluble Carbonate of Copper Grown Under a Soda Solution L
    Journal of the Arkansas Academy of Science Volume 1 Article 22 1941 Crystals of an Insoluble Carbonate of Copper Grown under a Soda Solution L. B. Roberts University of Arkansas at Monticello Edwin Roberts University of Arkansas at Monticello Follow this and additional works at: http://scholarworks.uark.edu/jaas Part of the Organic Chemistry Commons Recommended Citation Roberts, L. B. and Roberts, Edwin (1941) "Crystals of an Insoluble Carbonate of Copper Grown under a Soda Solution," Journal of the Arkansas Academy of Science: Vol. 1 , Article 22. Available at: http://scholarworks.uark.edu/jaas/vol1/iss1/22 This article is available for use under the Creative Commons license: Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0). Users are able to read, download, copy, print, distribute, search, link to the full texts of these articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This Article is brought to you for free and open access by ScholarWorks@UARK. It has been accepted for inclusion in Journal of the Arkansas Academy of Science by an authorized editor of ScholarWorks@UARK. For more information, please contact [email protected], [email protected]. Journal of the Arkansas Academy of Science, Vol. 1 [1941], Art. 22 CRYSTALS OF AN INSOLUBLE CARBONATE OF COPPER GROWN UNDER A SODA SOLUTION1 L. B. Roberts and Edwin Roberts, Arkansas Agricultural and Mechanical College, Monticello When an old fire extinguisher of the soda-acid type was opened and emptied preparatory to recharging, several grams of blue crystals were found in the bottom of the container.
    [Show full text]