DOCSLIB.ORG

A Functional Analysis of Two 3D-Scanned Antique Pistols From

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A Functional Analysis of Two 3D-Scanned Antique Pistols From Virtual Archaeology Review, 11(22): 85-94, 2020 https://doi.org/10.4995/var.2020.12676 © UPV, SEAV, 2015 Received: November 8, 2019 Accepted: January 3, 2020 A FUNCTIONAL ANALYSIS OF TWO 3D-SCANNED ANTIQUE PISTOLS FROM NEW ZEALAND UN ANÁLISIS FUNCIONAL DE DOS PISTOLAS ANTIGUAS ESCANEADAS EN 3D DE NUEVA ZELANDA John LaRocco , Dong-Guk Paeng* Ocean System Engineering, Jeju National University, Jeju City, Jeju, 63243, Republic of Korea. [email protected]; [email protected] Highlights: Preservation of historical machines requires continual maintenance, including replacement of worn or missing parts. A combination of 3D scanning and digital models was used to analyze two antique pistols from New Zealand: a converted flintlock pistol and a transitional revolver. The method of making and analyzing digital models detailed in this study offers a way to facilitate historical preservation, experimental archaeology, and functional analysis. Abstract: Preservation of historical weapons requires continual and careful maintenance. Digital three-dimensional (3D) scanning can assist in preservation and analysis by generating a 3D computer model. New Zealand presents a special case for historical preservation, owing to the rapid import of European goods in a culture previously unexposed to metalworking. This, and the subsequent British colonization, led to upheaval and war. The most intense conflict between British and Maori forces was in the New Zealand Land Wars of the mid-19th century. The primary handheld firearms used in this period were black-powder muzzle-loaders, and the variety of armed factions involved in the war resulted in an eclectic range of weapons used. Two antique muzzle-loading pistols from this period were scanned and analyzed. Insights were gained into the history of double-barreled muzzle-loading pistols and transitional revolvers. The double-barreled pistol was determined to have been a flintlock pistol from a century prior to the Land Wars, later converted to percussion cap ignition. The transitional revolver was an intermediate step between the multi-barrel pepperbox pistol and the “true” revolver, but it remained in use throughout the Victorian era. Both types of firearms were effectively obsolete elsewhere in the world by the time of the Land Wars, but the conflict created a demand for a variety of weapons. While the pistols analyzed in this study are decommissioned and no longer in working order, the 3D models made from the samples afforded a unique glimpse into New Zealand’s history. The methodology detailed over the course of the study can be applied to other historical firearms in order to facilitate preservation, investigation, and experimentation. Keywords: historical weapon; 3D modeling; antique pistol; 3D digitization; digital preservation; 3D reconstruction Resumen: La preservación de las armas históricas requiere un mantenimiento continuo y cuidadoso. El escaneo digital tridimensional (3D) puede ayudar en la preservación y el análisis mediante la generación de un modelo informático en 3D. Nueva Zelanda presenta un caso especial para la preservación histórica, debido a la rápida importación de productos europeos en una cultura que no estaba expuesta a la metalurgia. Esto, junto con la posterior colonización británica, provocó disturbios y guerras. El conflicto más intenso entre las fuerzas británicas y maoríes se produjo en la Guerra de las Tierras de Nueva Zelanda a mediados del siglo XIX. Las principales armas de fuego de mano utilizadas en este período fueron los cargadores de pólvora negra, y la variedad de facciones armadas involucradas en la guerra dio lugar a una gama ecléctica de armas utilizadas. Dos antiguas pistolas de carga con boca de este período fueron escaneadas y analizadas. Se adquirieron conocimientos sobre la historia de las pistolas de doble cañón de carga con boca y los revólveres de transición. Se determinó que la pistola de doble cañón era una pistola de chispa de un siglo antes de la Guerra de las Tierras, convertida más tarde en una pistola de percusión. El revólver de transición fue un paso intermedio entre el revolver pimentero de varios cañones y el "verdadero" revólver, pero se siguió utilizando durante toda la época victoriana. Ambos tipos de armas de fuego habían quedado obsoletas en otras partes del mundo en el momento de las Guerras, pero el conflicto creó una demanda de variedad de armas. Aunque las pistolas analizadas en este estudio están fuera de servicio y ya no funcionan, los modelos en 3D realizados a partir de las muestras permitieron dar un vistazo único a la historia de Nueva Zelanda. La metodología detallada en este estudio puede aplicarse a otras armas de fuego históricas con el fin de facilitar la preservación, investigación y experimentación. Palabras clave: arma histórica; modelado 3D; pistola antigua; digitalización 3D; preservación digital; reconstrucción 3D *Corresponding author: Dong-Guk Paeng, [email protected] 85 LAROCCO & PAENG, 2020 1. Introduction ignition method used in European firearms (Hogg, 1980; The Diagram Group, 2007; Kolesnik & Holubieva, 2018; Historical weapons require specialized care and handling Kohanoff, 2019). As Europeans had ventured overseas for long-term preservation. As early firearms were for conquest, commerce, and colonization for centuries by handmade, the loss of even a single component can this point, older models of firearms were still in use, and render the device non-functional. Even if the device is not even upgraded (Belich, 2013; Hacker, 1994; Kohanoff, actively used, periodic restoration is still required 2019; Jones, 2019; Steyn, 2018; Hackelton, 2019). (Edessa, 2016). This often requires highly specific Caplock firearms converted from flintlock ones still knowledge about the artifact’s composition and retained signs of the older mechanism, even after removal construction, which can be difficult to obtain in large (Hogg, 1980). collections (Fritsch & Klein, 2018b). Advances in digitized scanning and archiving can improve maintenance, help The dominant firearms of the era were single-shot detect forgeries, increase the accessibility of historic muzzle-loaders (Kolesnik & Holubieva, 2018). In the machinery, and facilitate experimental archaeology and early 1800s, breech-loading firearms and revolvers were analysis (Kumar, Snyder, Duncan, Cohen, & Cooper, rare (The Diagram Group, 2007). Both were known, but 2003; Rojas-Sola & de la Morena-de la Fuente, 2018; they were unreliable and expensive to produce with the Rojas-Sola, Galán-Moral, & de la Morena-de la Fuente, technology and metallurgy of the day. Other technologies, 2018; Neumüller, Reichinger, Rist, & Kern, 2014). such as multi-shot firearms with superposed loads, multi- Two decommissioned, antique muzzle-loading pistols barrel firearms, manually repeating firearms and from New Zealand were disassembled, scanned, and repeating air rifles were known, but they suffered from reconstructed for a comprehensive analysis. similar constraints (The Diagram Group, 2007; Hogg, 1980). As such, the most common way to ensure multiple, reliable shots in the same firearm was to include 2. Background additional barrels. 2.1. Digital reconstruction Multiple barrels increased the weight, cost, and complexity of the firearm. Examples of multiple-barrel Digital reconstruction offers the potential to record and firearms include volley guns, which used independent preserve historical artifacts and architecture. Laser-based barrels stacked on top of each other, and pepperbox three-dimensional (3D) scanners and photogrammetry pistols, which are the multi-barrel predecessors of the have been used to recod historic architecture and artwork revolver (O’Brien & Garcia, 2005). The first “modern” for years (Fritsch & Klein, 2018a, 2018b; Kumar et al., revolver is usually considered to be Samuel Colt’s 2003; Menna, Nocerino, Del Pizzo, Scamardella, & Paterson revolver, although Elisha Collier’s flintlock Ackermann, 2011; Neumüller et al., 2014; Vrubel, Bellon, revolver predates it by over two decades. As a revolver & Silva, 2009; Wachowiak & Karas, 2009). Models were allowed the discharge of multiple cartridges through a made from the digital 3D models, which, in turn, were single, rifled barrel, it was lighter and longer-ranged used to make virtual museum exhibits. Superficial, non- than a pepperbox pistol (The Diagram Group, 2007; invasive scanning was sufficient for structures and Hogg, 1980). artifacts without internal parts, such as tablets or sculptures (Wei, Chin, Majid, & Setan, 2010; Fritsch & To compete against true revolvers, gunsmiths adapted Klein, 2018b; Kumar et al., 2003; Pejić & Krasić, 2016). pepperboxes into transitional revolvers. Transitional Related work was conducted using a multimodal revolvers were essentially cut-down pepperbox pistols combination of technologies for ship hulls (Menna et al., with a short “barrel” grafted onto the upper part of the 2011b), a photogrammetric system for a sword (Gil- frame. The alignment of the cylinder with the added barrel Melitón & Lerma, 2019), and a high-resolution white-light was often imprecise, so a misaligned cylinder could result scanner for dental profiles (Fiorenza et al., 2018). in the catastrophic failure of the firearm and injury to the shooter (Hogg, 1980). However, such weapons had the Devices with complex internal components require either advantage of double action, where a single trigger pull non-invasive scanning or careful disassembly. Even with would both rotate the cylinder and fire the weapon.
Load more

Recommended publications
  • Revolver) Parts Smith & Wesson (Model–67
    (REVOLVER) PARTS SMITH & WESSON (MODEL–67) Popular Revolver Calibers: 38–SPECIAL / 357–MAGNUM www.BaptistSecurityTraining.com FRAZIER BAPTIST – Instructor (REVOLVER) PARTS FRONT SIGHT Located At The Front End Of The Gun (Above The Muzzle), Should Remain In Focus At All Times While Aiming REAR SIGHT Located At The Rear End Of The Gun (Above The Hammer), Used To Center The Front Sight While Aiming BARREL The Bullethead (Projectile) Will Travels Though After Being Fired MUZZLE Located At The End Of The Barrel, The Bullethead (Projectile) Exits FRAME The Main Portion Of The Gun, Contains The Machinery That Actually Makes The Gun Operate / Fire TOP STRAP Located Above The Cylinder, Holds The Barrel / Frame Together CYLINDER Holds The Cartridges That Are Waiting To Be Fired / Ejected, Most Cylinders Turn (Rotate) Counter Clockwise, There Are A Few Cylinders That Turn (Rotate) Clockwise CYLINDER This Portion Of The Cylinder Is Used To Make The Cylinder Rotate, BOLT NOTCH There Are Internal Machinery That Uses These Notches, These Notches Also Indicate Which Way The Cylinder Will Turn (Rotate) CYLINDER Used To Release The Cylinder From The Frame, In Order To Load / RELEASE Unload The Cartridges EJECTOR ROD Located Through The Center Of The Cylinder, Used To Move The Ejector Star, When Pushed With The Thumb EJECTOR STAR Located At The Rear Of The Cylinder, Used To Remove The Used Cartridge Casings, By Pushing The Ejector Rod HAMMER Used To Strike The Firing Pin / Cartridge Primer HAMMER SPUR Used To Manually Cock (Move Backward) The Hammer (Single
    [Show full text]
  • Thompson Brochure 9Th Edition.Indd
    9th Edition Own A Piece Of American History Thompson Submachine Gun General John T. Thompson, a graduate of West Point, began his research in 1915 for an automatic weapon to supply the American military. World War I was dragging on and casualties were mounting. Having served in the U.S. Army’s ordnance supplies and logistics, General Thompson understood that greater fi repower was needed to end the war. Thompson was driven to create a lightweight, fully automatic fi rearm that would be effective against the contemporary machine gun. His idea was “a one-man, hand held machine gun. A trench broom!” The fi rst shipment of Thompson prototypes arrived on the dock in New York for shipment to Europe on November 11, 1918 the day that the War ended. In 1919, Thompson directed Auto-Ordnance to modify the gun for nonmilitary use. The gun, classifi ed a “submachine gun” to denote a small, hand-held, fully automatic fi rearm chambered for pistol ammunition, was offi cially named the “Thompson submachine gun” to honor the man most responsible for its creation. With military and police sales low, Auto-Ordnance sold its submachine guns through every legal outlet it could. A Thompson submachine gun could be purchased either by mail order, or from the local hardware or sporting goods store. Trusted Companion for Troops It was, also, in the mid ‘20s that the Thompson submachine gun was adopted for service by an Dillinger’s Choice offi cial military branch of the government. The U.S. Coast Guard issued Thompsons to patrol While Auto-Ordnance was selling the Thompson submachine gun in the open market in the ‘20s, boats along the eastern seaboard.
    [Show full text]
  • The Norwich Gun Industry
    salzer_40_47 2/14/05 3:17 PM Page 40 The Norwich Gun Industry Dick Salzer New England and, especially, Connecticut have been and remain the center of the American gun industry ever since the days of the American Revolution. Gun makers orig- inally were attracted to Connecticut because of that state’s many assets—year-round water power, a skilled industrial labor base, good ports and rail lines, and proximity to the major population centers of New York and Boston—all of these contributed to that centralization. These factors were especially prevalent at Norwich. The City of Norwich was founded in 1659. By the time of the American Revolution, it had grown to become one of the 10 largest cities in the Colonies.1 It was richly endowed with all of those assets desirable in a manufacturing site, not the least of which was the confluence of the Shetucket and Yantic Rivers, which merged at Norwich to form the navi- gable Thames River. As a large city by the standards of the breadth of the Norwich arms industry during its golden day, it offered sources of capital, a diverse population of years. skilled workers, support industries, and easy access to the This presentation will focus largely on the period New York and Boston markets through its sheltered port starting in the 1840’s when conditions were exactly right and rail lines. for the incubation of the arms industry. This period The first record of arms making in Norwich was a con- includes names like Allen and Thurber, Smith and Wesson tract for 200 muskets of the Charleville pattern, placed with (and thereby Winchester), Manhattan, Christopher Brand, Nathan and Henry Cobb in 1798.2 These muskets were deliv- Thomas Bacon, Hopkins and Allen, and others.
    [Show full text]
  • FIREARM SAFETY CERTIFICATE MANUAL for California Firearms Dealers and DOJ Certified Instructors
    F S C Firearm Safety Certificate M A N U A L for California Firearms Dealers and DOJ Certified Instructors California Department of Justice Division of Law Enforcement Bureau of Firearms June 2020 FIREARM SAFETY CERTIFICATE MANUAL For California Firearms Dealers and DOJ Certified Instructors TABLE OF CONTENTS Introduction. 1 Firearms Dealer Responsibilities The Firearm Safety Certificate Law. .2 Verifying and Recording FSC Information on a DROS. 2 Firearm Safety Certificate Exemptions. 3 Safe Handling Demonstration Affidavits. 6 Firearm Safety Certificate Study Guide. 6 DOJ Certified Instructor Responsibilities The Firearm Safety Certificate Law. .7 Firearm Safety Certificate - Certified Instructor Cards. 7 Administering the FSC Test and Issuing FSCs. 7 Firearm Safety Certificate Fees. 7 The Firearm Safety Certificate Test Format. 7 Firearm Safety Certificate Test Guidelines. 8 Scoring the Firearm Safety Certificate Test. .8 Firearm Safety Certificate Issuance. 9 Firearm Safety Certificate Card Replacement. 9 Firearm Safety Certificate Record Keeping. 9 FSC Test Disqualification and Specific Acts of Collusion. 10 Safe Handling Demonstrations. 10 APPENDIX I Safe Handling Demonstration Steps (Conventional Firearms). 12 Semiautomatic Pistol. 12 Double-Action Revolver. 15 Single-Action Revolver. 17 Pump Action Long Gun. 19 Break-Top Long Gun. 20 Bolt Action Long Gun. 21 Lever Action Long Gun. 22 Semiautomatic Long Gun With a Detachable Magazine. 23 Semiautomatic Long Gun With a Fixed Magazine. 24 Safe Handling Demonstration Steps (Alternative Designs). 25 Semiautomatic Pistol With a Non-Locking Slide. 25 Semiautomatic Pistol With a Fixed Magazine. 26 Semiautomatic Pistol With a Magazine Operated Toggle Lock. 26 Semiautomatic Pistol With a Top-Feeding Magazine. 27 Semiautomatic Pistol With a Tip-Up Barrel.
    [Show full text]
  • Ar15 Semi—Automatic Instruction/ Safety Manual Caution
    AR15 SEMI—AUTOMATIC INSTRUCTION/ SAFETY MANUAL CAUTION: USE ONLY CLEAN, DRY, ORIGINAL, HIGH QUALITY COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITON which is appropriate to the caliber of your firearm. We do not recommend the use of remanufactured or hand loaded ammunition because it may cause severe damage to yourself and/ or your rifle. Page 1 SECTION 1 PRECAUTIONS READ AND UNDERSTAND ALL THE FOLLOWING PRECAUTIONS BEFORE REMOVING THIS FIREARM FROM ITS PACKAGE. ! WARNING: IF THIS FIREARM IS CARELESSLY OR IMPROPERLY HANDLED, UNINTENTIONAL DISCHARGE COULD RESULT AND COULD CAUSE INJURY, DEATH, OR DAMAGE TO PROPERTY. CAUTION: PRIOR TO LOADING AND FIRING, CAREFULLY READ THIS INSTRUCTION MANUAL WHICH GIVES BASIC ADVICE ON THE PROPER HANDLING AND FUNCTIONING OF THIS RADICAL FIREARMS SYSTEM. However, your safety and the safety of others (including your family) depends on your mature compliance with that advice, and your adoption, development and constant employment of safe practices. If unfamiliar with firearms, seek further advice through safe handling courses run by your local gun clubs, NRA approved instructor, or similar qualified organizations. Page 2 NOTICE: Radical Firearms shall not be responsible for injury, death, or damage to property resulting from either intentional or accidental discharge of this firearm, or from its function when used for purposes or subjected to treatment for which it was not designed. Radical Firearms will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, or the use of wrong caliber ammunition, or the use of ammunition other than original high quality commercially manufactured ammunition in good condition, or any combination thereof.
    [Show full text]
  • Download Rubino.Information.Pdf
    2019R00980NBK UNITED STATES DISTRICT COURT DISTRICT OF NEW JERSEY UNITED STATES OF AMERICA : Hon. : v. : Criminal No. 21- : JOSEPH RUBINO : 21 U.S.C. §§ 841(a)(1) and (b)(1)(D) : 18 U.S.C. § 922(g)(1) I N F O R M A T I O N The defendant having waived in open court prosecution by indictment, the Acting United States Attorney for the District of New Jersey, charges: COUNT ONE (Possession with Intent to Distribute Marijuana) On or about July 24, 2019, in the District of New Jersey and elsewhere, the defendant, JOSEPH RUBINO, did knowingly and intentionally possess with intent to distribute a quantity of a mixture and substance containing a detectable amount of marijuana, a Schedule I controlled substance. In violation of Title 21, United States Code, Sections 841(a)(1) and (b)(1)(D). COUNT TWO (Possession of Firearms by a Convicted Felon) On or about July 24, 2019, in the District of New Jersey and elsewhere, the defendant, JOSEPH RUBINO, knowing that he had previously been convicted in a court of at least one crime punishable by a term of imprisonment exceeding one year, did knowingly possess in and affecting commerce firearms and ammunition, namely: 1. An Intratec Arms Model TEC-DC9 semi-automatic assault handgun, bearing serial number D062728, with a threaded barrel attachment; 2. A Cobray Arms Mac-11 9mm semi-automatic assault pistol, bearing serial number 89-0057884, with a high-capacity magazine; 3. A loaded Smith & Wesson M&P pistol, bearing serial number HLJ4405; 4. Two (2) sawed-off double-barrel shotgun barrels; 5.
    [Show full text]
  • BERETTA Experienced
    T&E HANDGUNS Beginner Intermediate BERETTA Experienced BERETTA 92 FS Caliber: 9MM Handgun Type: Semi-Auto Pistol Barrel Length: 4.9 in. Weight: 33.3 oz. T&E HANDGUNS Beginner Intermediate GLOCK Experienced GLOCK 42 GEN3 GLOCK 43 Caliber: .380ACP Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 3.25 in. Barrel Length: 3.41 in. Weight: 13.76 oz. Weight: 17.99 oz. GLOCK 43X GLOCK 48 Caliber: 9MM Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 3.41 in. Barrel Length: 4.17 in. Weight: 18.70 oz. Weight: 20.74 oz. T&E HANDGUNS Beginner Intermediate GLOCK Experienced GLOCK 26 GEN3 GLOCK 26 GEN5 Caliber: 9MM Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 3.43 in. Barrel Length: 3.43 in. Weight: 21.52 oz. Weight: 21.69 oz. GLOCK 19 GEN3 GLOCK 19 GEN4 Caliber: 9MM Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 4.02 in. Barrel Length: 4.02 in. Weight: 23.63 oz. Weight: 23.63 oz. T&E HANDGUNS Beginner Intermediate GLOCK Experienced GLOCK 19 GEN5 GLOCK 45 Caliber: 9MM Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 4.02 in. Barrel Length: 4.02 in. Weight: 23.99 oz. Weight: 24.48 oz. GLOCK 17 GEN3 GLOCK 17 GEN4 Caliber: 9MM Caliber: 9MM Handgun Type: Semi-Auto Pistol Handgun Type: Semi-Auto Pistol Barrel Length: 4.49 in. Barrel Length: 4.49 in.
    [Show full text]
  • Illinois Current Through P.A
    State Laws and Published Ordinances – Illinois Current through P.A. 101-591 of the 2019 Regular Session of the 101st General Assembly. Office of the Attorney General Chicago Field Division 100 West Randolph Street 175 West Jackson Blvd., Suite Chicago, IL 60601 1500Chicago, IL 60604 Voice: (312) 814-3000 Voice: (312) 846-7200 http://www.illinoisattorneygeneral.gov/ https://www.atf.gov/chicago- field-division Table of Contents Chapter 430 – Public Safety Firearm Owners Identification Card Act Section 430 ILCS 65/1.1. Firearm defined; Firearm ammunition defined. Section 430 ILCS 65/2. Firearm Owner's Identification Card required; exceptions. Section 430 ILCS 65/3. Transfer of firearms; records; exceptions. Section 430 ILCS 65/3a. Reciprocal rights in Iowa, Missouri, Indiana, Wisconsin and Kentucky. Section 430 ILCS 65/3.1. Dial up system. Section 430 ILCS 65/3.2. List of prohibited projectiles; notice to dealers. Section 430 ILCS 65/4. Application for Firearm Owner's Identification Card. Section 430 ILCS 65/5. Approval or denial of application; fees. Section 430 ILCS 65/6. Contents of Firearm Owner's Identification Card. Section 430 ILCS 65/7. Validity of Firearm Owner’s Identification Card. Section 430 ILCS 65/8. Grounds for denial and revocation. Section 430 ILCS 65/8.1. Notifications to the Department of State Police. Section 430 ILCS 65/8.2. Firearm Owner's Identification Card denial or revocation. Section 430 ILCS 65/8.3. Suspension of Firearm Owner's Identification Card. Section 430 ILCS 65/9. Grounds for denial or revocation. Section 430 ILCS 65/9.5. Revocation of Firearm Owner's Identification Card.
    [Show full text]
  • Coltâ•Žs Patent Fire Arms Manufacturing Company Collection
    http://oac.cdlib.org/findaid/ark:/13030/c8hh6mgb No online items Finding Aid to the Colt’s Patent Firearms Manufacturing Company Collection 89.62 Finding aid prepared by Holly Rose Larson and Jeffrey Richardson Autry National Center, Autry Library 4700 Western Heritage Way Los Angeles, CA, 90027 (323) 667-2000 ext. 349 [email protected] 2012 March 7 Finding Aid to the Colt’s Patent 89.62 1 Firearms Manufacturing Company Collection 89.62 Title: Colt’s Patent Fire Arms Manufacturing Company Collection Identifier/Call Number: 89.62 Contributing Institution: Autry National Center, Autry Library Language of Material: English Physical Description: 3.4 Linear feet(2 boxes) Date (inclusive): 1894-1946 Abstract: Samuel Colt patented his revolver with a mechanically rotating cylinder in 1835 and 1836. It revolutionized the firearms industry and was the first truly global manufacturing export in American history. The success of the revolver ultimately allowed Samuel Colt to incorporate Colt’s Patent Fire Arms Manufacturing Company in 1855. This collection of Colt’s Patent Fire Arms Manufacturing Company documents spans 1894-1946 and includes contracts, correspondence, invoices, memos, notes, receipts, stock certificates, and trademark registration certificates regarding manufacture, registration and trade of Colt products. Language: English, Spanish, French. creator: Colt Manufacturing Company creator: Colt's Patent Fire Arms Manufacturing Company creator: Colt, Samuel, 1814-1862 Access Collection is open for research. Appointments to view materials are required. To make an appointment please visit http://theautry.org/research/research-rules-and-application or contact library staff at [email protected]. An item-level inventory is available from library staff.
    [Show full text]
  • Contact Mankato Police Department (507) 387-8780 Stolen Firearms Mankato, MN National Guard Armory Burglary 12/1/2010 ICR #10-33708
    Stolen Firearms Mankato, MN National Guard Armory Burglary 12/1/2010 ICR #10-33708 Manufacturer Type Model Cal./Ga. SN/OAN Notes/Markings/Addn'tl Description/Info Allen Pepperbox 4 shot percusion .36 cal 421 pepperbox Allen & Thurber Pepperbox Pepperbox .34 403 5 shot Allen & Thurber 6 shot .36 cal 634 Allen & Thurber Rifle .38 Centerfire Extra Long NONE Am. Standard Tool Co. Revolver Rim-Fire .22 43704 7 shot Bacon Arms Co Pepperbox Cartridge Pepperbox .22 cal rim-fire NONE Barber & LeFever Shotgun 10 ga 5165 cased, Double barrel C. Sharpe Pepperbox Pepperbox No. 1 .22 cal rim-fire 1333 Colt Rifle Lightning .22 rim-fire 52525 Colt Revolver Pocket 1849 .31 248530 6 shot single action Colt Revolver Army .32-20 51157 Double action Colt Rifle Lightning .32-30 W.C.F or .32 C.L.M.R. 7556 Colt Revolver ? Store Keepers .33 42310 Lightning double action Colt Revolver Navy 1851 .36 73608 6 shot single action Colt Revolver Navy 1851 .36 174324 6 shot single action Colt Semi-auto 1911 Govt .45 C175688 Grips carved in Japanese Style Colt Revolver Old Line .22 cal 7 shot rim-fire 20375 high hammer variation, single action Colt Pistol Root Model .28 cal 5 shot 3782 Colt Pistol New Police Model of 1862 .36 cal, 5 shot 18319 single action Colt Pistol Navy Model of 1861 .36 cal, 6 shot 7774 single action Colt Derringer No 3 Derringer .41 cal rim fire 2330 Colt Pistol Army Model of 1860 .44 cal , 6 shot 62837 single action Colt Pistol Army Frontier Model of 1878 .45 cal, 6 shot 674 Continental Arms Co.
    [Show full text]
  • Pistols, Crime, and Public: Safety in Early America Clayton E. Cramer
    WLR44-4_OLSON-4-25-08 6/3/2008 3:46:03 PM PISTOLS, CRIME, AND PUBLIC: SAFETY IN EARLY AMERICA CLAYTON E. CRAMER1 & JOSEPH EDWARD OLSON2 There is a vigorous debate under way about the scope of the Second Amendment. What are the limits of that right? What “arms” does it protect? Does it protect an individual right to possess and perhaps to carry firearms? The District of Columbia, in its attempt to defend its 1976 gun control law, has argued that the widespread possession of handguns (“pistols”) represents an especially serious public safety hazard, and that even if arguendo, the Second Amendment protects an individual right, it would not extend to pistols, which the District of Columbia characterizes as “uniquely dangerous weapons” that present “unique dangers to innocent persons.”3 This paper examines what was likely the Framer’s original public meaning of the Bill of Rights provision that protects “the right of the people to keep and bear arms,” with no apparent limitations concerning handguns. We do so by examining what the history of pistols in early America tells us about foreseeable technological developments. I. GUNS, ARMS, FIRE-ARMS, PISTOLS: SOME DEFINITIONS A few definitions are appropriate because there have been a few subtle changes in the meaning of some of the terms over the last two centuries. “Gun” had a more restricted meaning in the eighteenth century than it does today, referring in some contexts to privately owned cannon,4 but most often to what today we call long guns: 1. B.A. (History with Distinction), Sonoma State University; M.A.
    [Show full text]
  • Voices of the Past
    Voices of the Past Part of the Army Heritage Center Foundation’s Educational Series CIVIL WAR Answering the Call: The Personal Highlights: Equipment of a Civil War Soldier • Civil War Soldiers (United States, 1861-1865) carried fifty pounds or The Union Army in the Civil War had a more of equipment distinct advantage over the necessary to travel, Confederacy when it came to camp, and fight. equipment. The North had more factories to produce supplies, more • Over time Soldiers people to work in the factories, and would discard more railroads to deliver the supplies unnecessary to the Soldiers. In the end, the North’s equipment to lessen their loads. industrial might played an important factor in the Confederate defeat. • Union Soldiers usually had better equipment For a Soldier, equipment is a matter of than their Confederate survival. Even something as simple as counterparts. a button can make the difference between victory and defeat if it fails to • Confederate Soldiers function properly at the wrong time. acquired Union For this reason Soldiers have a strong equipment whenever tendency to become attached to they could. equipment they like, and to modify or discard equipment they find unreliable Union Soldier in full field gear. or useless. Among the Infantry, who Image Courtesy of the Center of have to carry their equipment Military History. wherever they go, this tendency is even stronger. to a great deal of variation in equipment and uniforms. As the war Soldiers must carry everything they progressed, uniforms and equipment need for combat operations with them became more standardized in order to at all times.
    [Show full text]