(Quartz) Silica, Sio2, Is a White Or Colorless Crystalline Compound

Total Page:16

File Type:pdf, Size:1020Kb

(Quartz) Silica, Sio2, Is a White Or Colorless Crystalline Compound Silica (quartz) Silica, SiO2, is a white or colorless crystalline compound found mainly as quartz, sand, flint, and many other minerals. Silica is an important ingredient to manufacture a wide variety of materials. Quartz; Quartz is the most abundant silica mineral. Pure Quartz is colorless and transparent. It occurs in most igneous and practically all metamorphic and sedimentary rocks. It is used as a component of numerous industrial materials. Silicon (Si) has the atomic number 14 and is closely related to carbon. It is a relatively inert metalloid. Silicon is often used for microchips, glass, cement, and pottery. Silica is the most abundant mineral found in the crust of the earth. One of the most common uses of silica quarts is the manufacturer of glass. Silica is the fourteenth element on the periodic table. It can sometimes be found as the substance, quartz which is usually used in jewelry, test tubes, and when placed under pressure, generates an electrical charge. Quartz is the second most abundant mineral in the Earth's crust. It is a clear, glossy mineral with a hardness of 7 on the MOHS scale. Silica, Sa,is a component of glass and concrete. A form of Silica commonly known as quartz, Silica tetrahedra, is the second most common mineral in the earth's crust, it comes in many different forms. Silica is a compound of silicon and oxygen. Earth's outer crust contains 59% of this material. It has three major rock forms, which are quartz, tridymite, and cristobalite. Silica, commonly known in the form of quartz, is the dioxide form of silicon, SiO2. It is usually used to manufacture glass, ceramics and abrasives. Quartz is the second most common mineral in Earth’s crust. Its chemical name is SiO2. Although quartz is common, it is usually twinned so industries often Silica; Also known as the silicon dioxide, has a white powdery substance solid. It is used in production in many products such as glass, food additive and raw material for production. The chemical compound silica, also known as silicon dioxide, is known for its hardness since the 16th century. It is found in nature in many different forms, such as flint, quartz, and opal. Silica (quartz): Silica, SiO2, is a chemical compound that is composed of one silicon atom and two oxygen atoms. It appears naturally in several crystalline forms, one of which is quartz. Silica Quartz- A colorless, ordorless crystal found in different colors such as white, green, black, purple. It will not burn to the touch but can cause cancer Silicon dioxide, commonly known as silica (and/or quartz), is a prevalent element in the Earth's crust. One fourth, or twenty-eight percent (to be percise) of the Earth's crust is composed of silica. Silica:scientific name for a group of minerals composed of silicon and oxygen atoms, (crystalline silica). Different soils contain all forms of crystalline silica in the form of quartz. Quartz silica is a colorless/white, black, purple, or green crystals. It has no odor and will not burn. It's cancer hazardous. It is found in mines and tunnels. Silica, or silicon dioxide, is the oxide of silicon. It is found in nature in several forms; one of which is quartz. Quartz is the second most common mineral on Earth. Silica(quartz); Silica(quartz) is a colorless crystal like beryl. The silica(quartz) come in different colors, such as yellow(citrine), smoky, and purple(amethyst). The color changes because of transition-metal impurities. Silica, a white to colorless crystalline compound, is usually in the form of quartz. It is used as building stones and to make glass. Silica has covalent bonding and forms a network structure. Silica, SiO2, has a crystalline form called quartz, which is found in many types of rocks, and is the second most abundant mineral in the Earth’s crust. This very hard mineral is usually colorless. Silica (quartz): The second most common element in the earth's crust, silica is never found in its natural state, and alloys with a number of different metals. Silica, SiO2, has a crystalline form called quartz, which is found in numerous types of rocks, and is the second most plentiful mineral in the Earth’s crust. This very firm mineral is usually colorless. Silica, SiO2, is a white or colorless crystalline compound found mainly as quartz, sand, flint, and many other minerals.? Silica is an important ingredient to manufacture a wide variety of materials. Silica is a chemical compound also known as silicon dioxide or silox. The chemical formula for silicon is SiO2. Silica may be found in many forms of nature. For example, flint, quartz, and opal. Silica is also known as silicon dioxide SiO2. Silica has three main crystalline varieties: quartz the most abundant, tridymite, and cristobalite. The mass of the earths crust is 59 percent Silica. Quartz is mainly made up of silica. The formula for it is SiO2. It has a hardness of 7 on the Mohs scale. It has the density of 2.65g/cm3 Silica, SiO2, is composed of Silicone and Oxygen. It has been known since ancient times, is found in sand, and is a major component of glass. Silica is a chemical compound, also called silicon dioxide. It can sometimes be found as the substance, quartz which is usually used in jewelry, test tubes, and when placed under pressure, generates an electrical charge. Silica is also known as silicon dioxide, the chemical compound is oxide of silicon and the chemical formula is SiO2. It’s principle component in most types of glass and substances such as concrete. Silica (quartz); is a naturally occurring minerals that can be found in mines and use in the fabrication of stone and clay products. Silica is odorless and various in color. Silica – comes from silicone after it oxidizes. It helps form most hard things like glass, porcelain, and some concrete. Its found natural in flint, quarts and opal. Wesley hamachi Quartz, the clear and opaque mineral, is the second most common mineral in the Earth’s continental crust. The six-sided shape of the mineral makes it unique and elegant to observe. Silica: Silica can be found in nature as 35 different crystalline forms. One of its forms is quartz; which can generate current when mechanical stress is applied to it. Most sand is made up of silica depending on its geographical location. Silica is also used to make glass. Silica (Quartz) is chemical compound silicon dioxide SiO2. Silica is often found in nature as sand (non coastal), usually in the form of quartz. The most common form of manufactured silica is glass. Silica, is a natural compound that has a crystal characteristic and can be found in beach sand. The most common usage is that of glass in which Silica is fused together. Silica; silica (quartz), the dioxide form of silicon, SiO2, used usually in the form of its prepared white powder chiefly in the manufacture of glass, water glass, ceramics, and abrasives. Silica is the dioxide form of silicon, SiO2, and occurs mostly as quartz sand, flint, and agate. Silica's powder form is used to manufacture glass, ceramics, etc. Silica SiO2 is the chemical compound silicon dioxide. It is formed when silicon is exposed to oxygen. It has a covalent bond and is a superior electric insulator, posessing high chemical stability. Quartz is the second most common mineral in the Earth's continental crust. It is composed of silica tetrahedral, and belongs to the rhombohedral crystal system. Silica (quartz); "Silica," or silicon dioxide (SiO2), occurs in either a crystalline or non- crystalline (amorphous) form. Quartz is a colourless, odourless, non-combustible solid and a component of many mineral dusts. Silica(quartz);Silica(quartz) is an industrial material, its sand is often used for glass making. It is retrieved my mining and a limited environmental impact on earth. Silica (quartz): Silica also called Silicon Dioxide, compound of the two most abundant elements in the Earth's crust. Silica has three main crystalline varieties: quartz (by far the most abundant), tridymite, and cristobalite. Silica (Quartz) : Quartz, the second most common mineral on the earth's crust, belongs to the rhombohedral or trigonal crystal system and can be manufactured using hydrothermal processes in autoclaves. .
Recommended publications
  • The Dependence of the Sio Bond Length on Structural Parameters in Coesite, the Silica Polymorphs, and the Clathrasils
    American Mineralogist, Volume 75, pages 748-754, 1990 The dependence of the SiO bond length on structural parameters in coesite, the silica polymorphs, and the clathrasils M. B. BOISEN, JR. Department of Mathematics, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, U.S.A. G. V. GIBBS, R. T. DOWNS Department of Geological Sciences, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, U.S.A. PHILIPPE D' ARCO Laboratoire de Geologie, Ecole Normale Superieure, 75230 Paris Cedex OS, France ABSTRACT Stepwise multiple regression analyses of the apparent R(SiO) bond lengths were com- pleted for coesite and for the silica polymorphs together with the clathrasils as a function of the variables};(O), P (pressure), f,(Si), B(O), and B(Si). The analysis of 94 bond-length data recorded for coesite at a variety of pressures and temperatures indicates that all five of these variables make a significant contribution to the regression sum of squares with an R2 value of 0.84. A similar analysis of 245 R(SiO) data recorded for silica polymorphs and clathrasils indicate that only three of the variables (B(O), };(O), and P) make a signif- icant contribution to the regression with an R2 value of 0.90. The distribution of B(O) shows a wide range of values from 0.25 to 10.0 A2 with nearly 80% of the observations clustered between 0.25 and 3.0 A2 and the remaining values spread uniformly between 4.5 and 10.0 A2. A regression analysis carried out for these two populations separately indicates, for the data set with B(O) values less than three, that };(O) B(O), P, and };(Si) are all significant with an R2 value of 0.62.
    [Show full text]
  • Crystalline Silica, Cristobalite (CAS No
    Crystalline Silica, Quartz (CAS No. 14808-60-7) Crystalline Silica, Cristobalite (CAS No. 14464-46-1) Crystalline Silica, Tridymite (CAS No. 15468-32-3) Diatomaceous earth (CAS No. 61790-53-2) This dossier on crystalline silica, quartz, cristobalite and tridymite and diatomaceous earth presents the most critical studies pertinent to the risk assessment of these substances in their use in drilling muds and cement additives. This dossier does not represent an exhaustive or critical review of all available data. The majority of information presented in this dossier was obtained from the ECHA database that provides information on chemicals that have been registered under the EU REACH (ECHA). Where possible, study quality was evaluated using the Klimisch scoring system (Klimisch et al., 1997). For the purpose of this dossier, crystalline silica, quartz (CAS No. 14808-60-7) has been reviewed as representative of crystalline silica cristobalite and tridymite. Crystalline silica, quartz is also considered representative of diatomaceous earth, as they both consist mainly of silicon dioxide. Screening Assessment Conclusion – Crystalline silica, quartz, cristobalite and tridymite and diatomaceous earth are classified as tier 1 chemicals and require a hazard assessment only. 1 BACKGROUND Crystalline silica is a common mineral found in the earth's crust. Materials like sand, stone, concrete and mortar contain crystalline silica. It is also used to make products such as glass, pottery, ceramics, bricks and artificial stone. Silica, in the form of sand, is used as the main ingredient in sand casting for the manufacture of metallic components in engineering and other applications. The high melting point of silica enables it to be used in such applications.
    [Show full text]
  • Carbothermal Synthesis of Silicon Nitride
    Carbothermal Synthesis of Silicon Nitride Xiaohan Wan A thesis in fulfilment of the requirements for the degree of Doctor of Philosophy School of Materials Science and Engineering Faculty of Science March 2013 THE UNIVERSITY OF NEW SOUTH WALES Thesis/Dissertation Sheet Surname or Family name: Wan First name: Xiaohan Other name/s: Abbreviation for degree as given in the University calendar: PhD School: Materials Science and Engineering Faculty: Science Title: Carbothermal synthesis of silicon nitride Abstract 350 words maximum Carbothermal synthesis of silicon nitride Si3N4 followed by decomposition of Si3N4 is a novel approach to production of solar-grade silicon. The aim of the project was to study reduction/nitridation of silica under different conditions and to establish mechanism of silicon nitride formation. Carbothermal reduction of quartz and amorphous silica was investigated in a fixed bed reactor at 1300-1650 °C in nitrogen at 1-11 atm pressure and in hydrogen-nitrogen mixtures at atmospheric pressure. Samples were prepared from silica-graphite mixtures in the form of pellets. Carbon monoxide evolution in the reduction process was monitored using an infrared sensor; oxygen, nitrogen and carbon contents in reduced samples were determined by LECO analyses. Phases formed in the reduction process were analysed by XRD. Silica was reduced to silicon nitride and silicon carbide; their ratio was dependent on reduction time, temperature and nitrogen pressure. Reduction products also included SiO gas which was removed from the pellet with the flowing gas. In the experiments, reduction of silica started below 1300 °C; the reduction rate increased with increasing temperature. Silicon carbide was the major reduction product at the early stage of reduction; the fraction of silicon nitride increased with increasing reaction time.
    [Show full text]
  • The Development of the Periodic Table and Its Consequences Citation: J
    Firenze University Press www.fupress.com/substantia The Development of the Periodic Table and its Consequences Citation: J. Emsley (2019) The Devel- opment of the Periodic Table and its Consequences. Substantia 3(2) Suppl. 5: 15-27. doi: 10.13128/Substantia-297 John Emsley Copyright: © 2019 J. Emsley. This is Alameda Lodge, 23a Alameda Road, Ampthill, MK45 2LA, UK an open access, peer-reviewed article E-mail: [email protected] published by Firenze University Press (http://www.fupress.com/substantia) and distributed under the terms of the Abstract. Chemistry is fortunate among the sciences in having an icon that is instant- Creative Commons Attribution License, ly recognisable around the world: the periodic table. The United Nations has deemed which permits unrestricted use, distri- 2019 to be the International Year of the Periodic Table, in commemoration of the 150th bution, and reproduction in any medi- anniversary of the first paper in which it appeared. That had been written by a Russian um, provided the original author and chemist, Dmitri Mendeleev, and was published in May 1869. Since then, there have source are credited. been many versions of the table, but one format has come to be the most widely used Data Availability Statement: All rel- and is to be seen everywhere. The route to this preferred form of the table makes an evant data are within the paper and its interesting story. Supporting Information files. Keywords. Periodic table, Mendeleev, Newlands, Deming, Seaborg. Competing Interests: The Author(s) declare(s) no conflict of interest. INTRODUCTION There are hundreds of periodic tables but the one that is widely repro- duced has the approval of the International Union of Pure and Applied Chemistry (IUPAC) and is shown in Fig.1.
    [Show full text]
  • C:\Documents and Settings\Alan Smithee\My Documents\MOTM
    I`mt`qx1/00Lhmdq`knesgdLnmsg9Rbnkdbhsd This month’s mineral, scolecite, is an uncommon zeolite from India. Our write-up explains its origin as a secondary mineral in volcanic host rocks, the difficulty of collecting this fragile mineral, the unusual properties of the zeolite-group minerals, and why mineralogists recently revised the system of zeolite classification and nomenclature. OVERVIEW PHYSICAL PROPERTIES Chemistry: Ca(Al2Si3O10)A3H2O Hydrous Calcium Aluminum Silicate (Hydrous Calcium Aluminosilicate), usually containing some potassium and sodium. Class: Silicates Subclass: Tectosilicates Group: Zeolites Crystal System: Monoclinic Crystal Habits: Usually as radiating sprays or clusters of thin, acicular crystals or Hairlike fibers; crystals are often flattened with tetragonal cross sections, lengthwise striations, and slanted terminations; also massive and fibrous. Twinning common. Color: Usually colorless, white, gray; rarely brown, pink, or yellow. Luster: Vitreous to silky Transparency: Transparent to translucent Streak: White Cleavage: Perfect in one direction Fracture: Uneven, brittle Hardness: 5.0-5.5 Specific Gravity: 2.16-2.40 (average 2.25) Figure 1. Scolecite. Luminescence: Often fluoresces yellow or brown in ultraviolet light. Refractive Index: 1.507-1.521 Distinctive Features and Tests: Best field-identification marks are acicular crystal habit; vitreous-to-silky luster; very low density; and association with other zeolite-group minerals, especially the closely- related minerals natrolite [Na2(Al2Si3O10)A2H2O] and mesolite [Na2Ca2(Al6Si9O30)A8H2O]. Laboratory tests are often needed to distinguish scolecite from other zeolite minerals. Dana Classification Number: 77.1.5.5 NAME The name “scolecite,” pronounced SKO-leh-site, is derived from the German Skolezit, which comes from the Greek sklx, meaning “worm,” an allusion to the tendency of its acicular crystals to curl when heated and dehydrated.
    [Show full text]
  • The Preparation and Reactions of the Lower Chlorides and Oxychlorides of Silicon Joseph Bradley Quig Iowa State College
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1926 The preparation and reactions of the lower chlorides and oxychlorides of silicon Joseph Bradley Quig Iowa State College Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Inorganic Chemistry Commons Recommended Citation Quig, Joseph Bradley, "The preparation and reactions of the lower chlorides and oxychlorides of silicon " (1926). Retrospective Theses and Dissertations. 14278. https://lib.dr.iastate.edu/rtd/14278 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. INFORMATION TO USERS This manuscript has been reproduced from the microfilm master. UlVli films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter face, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and impiroper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted. Also, if unauthorized copyright material had to be removed, a note will indicate the deletion. Oversize materials (e.g., maps, drawings, charts) are reproduced by sectioning the original, beginning at the upper left-hand corner and continuing from left to right in equal sections with small overiaps.
    [Show full text]
  • Types of Lattices
    Types of Lattices Types of Lattices Lattices are either: 1. Primitive (or Simple): one lattice point per unit cell. 2. Non-primitive, (or Multiple) e.g. double, triple, etc.: more than one lattice point per unit cell. Double r2 cell r1 r2 Triple r1 cell r2 r1 Primitive cell N + e 4 Ne = number of lattice points on cell edges (shared by 4 cells) •When repeated by successive translations e =edge reproduce periodic pattern. •Multiple cells are usually selected to make obvious the higher symmetry (usually rotational symmetry) that is possessed by the 1 lattice, which may not be immediately evident from primitive cell. Lattice Points- Review 2 Arrangement of Lattice Points 3 Arrangement of Lattice Points (continued) •These are known as the basis vectors, which we will come back to. •These are not translation vectors (R) since they have non- integer values. The complexity of the system depends upon the symmetry requirements (is it lost or maintained?) by applying the symmetry operations (rotation, reflection, inversion and translation). 4 The Five 2-D Bravais Lattices •From the previous definitions of the four 2-D and seven 3-D crystal systems, we know that there are four and seven primitive unit cells (with 1 lattice point/unit cell), respectively. •We can then ask: can we add additional lattice points to the primitive lattices (or nets), in such a way that we still have a lattice (net) belonging to the same crystal system (with symmetry requirements)? •First illustrate this for 2-D nets, where we know that the surroundings of each lattice point must be identical.
    [Show full text]
  • Minnesota's Mineral Resources
    CHAPTER • 9 Minnesota's Mineral Resources IN MINNESOTA the production of iron ore is far more valuable economically than the total of all other mineral products, but im­ portant industries are based on Minnesota's other geological forma­ tions as well. Architectural, monumental, and structural stone are produced from granite, limestone, dolomite, and other Minnesota rocks. Gravel and sand are excavated and processed, and clay is used for many ceramic products. :Manganese in important amounts occurs in the iron ores of the Cuyuna district. Finally, although they are often not thought of as mineral products, two of our most im­ portant mineral resources are water and soil. The iron ores and mining operations of the Mesabi, Vermilion, and Cuyuna iron-bearing districts and of the southeastern lYlinnesota counties will be discussed in detail in later chapters, but a few sta­ tistics on Minnesota's iron ore industry may remind us how impor­ tant this geological heritage is. The following is an estimate of Min­ nesota's iron ore reserves, made on lYlay 1, 1961: Gross Tons Mesabi Range 500,799,179 Vermilion Range 9,755,974 Cuyuna Range 36,530,000 Fillmore County 'il,860,337 Total iron ore 549,945,490 172 MI NESOTA'S MINERAL RESOURCES The total production of iron ore in Minne ota to January 1, 1962, was 2,529,737,553 tons. Total taxes paid on iron ore to January 1, 1961 , were approximately $1,257,448,400, a very important source of funds for the state government. Slightly over 60 per cent of the total iron ore produced in the United States has come from l\1inne- ota.
    [Show full text]
  • Symposium on Agate and Cryptocrystalline Quartz
    Symposium on Agate and Cryptocrystalline Quartz September 10 – 13, 2005 Golden, Colorado Sponsored by Friends of Mineralogy, Colorado Chapter; Colorado School of Mines Geology Museum; and U.S. Geological Survey 2 Cover Photos {top left} Fortification agate, Hinsdale County, Colorado, collection of the Geology Museum, Colorado School of Mines. Coloration of alternating concentric bands is due to infiltration of Fe with groundwater into the porous chalcedony layers, leaving the impermeable chalcedony bands uncolored (white): ground water was introduced via the symmetric fractures, evidenced by darker brown hues along the orthogonal lines. Specimen about 4 inches across; photo Dan Kile. {lower left} Photomicrograph showing, in crossed-polarized light, a rhyolite thunder egg shell (lower left) a fibrous phase of silica, opal-CTLS (appearing as a layer of tan fibers bordering the rhyolite cavity wall), and spherulitic and radiating fibrous forms of chalcedony. Field of view approximately 4.8 mm high; photo Dan Kile. {center right} Photomicrograph of the same field of view, but with a 1 λ (first-order red) waveplate inserted to illustrate the length-fast nature of the chalcedony (yellow-orange) and the length-slow character of the opal CTLS (blue). Field of view about 4.8 mm high; photo Dan Kile. Copyright of articles and photographs is retained by authors and Friends of Mineralogy, Colorado Chapter; reproduction by electronic or other means without permission is prohibited 3 Symposium on Agate and Cryptocrystalline Quartz Program and Abstracts September 10 – 13, 2005 Editors Daniel Kile Thomas Michalski Peter Modreski Held at Green Center, Colorado School of Mines Golden, Colorado Sponsored by Friends of Mineralogy, Colorado Chapter Colorado School of Mines Geology Museum U.S.
    [Show full text]
  • What Is the Value of Water Contact Angle on Silicon?
    materials Article What Is the Value of Water Contact Angle on Silicon? Paweł Bryk 1, Emil Korczeniewski 2, Grzegorz S. Szyma ´nski 2, Piotr Kowalczyk 3, Konrad Terpiłowski 4 and Artur P. Terzyk 2,* 1 Department of Chemistry, Chair of Theoretical Chemistry, Maria Curie-Skłodowska University, 20-031 Lublin, Poland; [email protected] 2 Faculty of Chemistry, Physicochemistry of Carbon Materials Research Group, Nicolaus Copernicus University in Toru´n,Gagarin Street 7, 87-100 Toru´n,Poland; [email protected] (E.K.); [email protected] (G.S.S.) 3 College of Science, Health, Engineering and Education, Murdoch University, Murdoch WA 6150, Australia; [email protected] 4 Department of Chemistry, Chair of Physical Chemistry of Interfacial Phenomena, Maria Curie-Skłodowska University, 20-031 Lublin, Poland; [email protected] * Correspondence: [email protected]; Tel.: +48-56-61-14-371 Received: 4 March 2020; Accepted: 26 March 2020; Published: 27 March 2020 Abstract: Silicon is a widely applied material and the wetting of silicon surface is an important phenomenon. However, contradictions in the literature appear considering the value of the water contact angle (WCA). The purpose of this study is to present a holistic experimental and theoretical approach to the WCA determination. To do this, we checked the chemical composition of the silicon (1,0,0) surface by using the X-ray photoelectron spectroscopy (XPS) method, and next this surface was purified using different cleaning methods. As it was proved that airborne hydrocarbons change a solid wetting properties the WCA values were measured in hydrocarbons atmosphere. Next, molecular dynamics (MD) simulations were performed to determine the mechanism of wetting in this atmosphere and to propose the force field parameters for silica wetting simulation.
    [Show full text]
  • Stishovite and Seifertite in Lunar Meteorite Northwest Africa 4734
    71st Annual Meteoritical Society Meeting (2008) 5058.pdf FIRST EVIDENCE OF HIGH PRESSURE SILICA: STISHOVITE AND SEIFERTITE IN LUNAR METEORITE NORTHWEST AFRICA 4734. H. Chennaoui Aoudjehane1-2, A. Jambon2 1Université Hassan II Aïn Chock, Laboratoire Géosciences, BP 5366 Maârif Casa- blanca Morocco (e-mail: [email protected]), 2Université Pierre et Marie Curie-Paris6 and IPGP Laboratoire MAGIE, Case 110, 4 place Jussieu, 75252 Paris France. Introduction: Silica is a rare phase in lunar rocks; it has been described as either quartz, cristobalite and/or tridymite [1]. Northwest Africa 4734, is an uncommon type of lunar rock, which may be launched paired with the LaPaz Icefield Lunar Mare basalts found in 2002-03 in Antarctica [2-6], it is a coarse grained rock of basaltic composition, exhibits a number of sig- nificant shock features, such as PDFs, extensive fracturation of pyroxene, impact melt pockets and transformation of plagioclase to maskelynite; silica is present as a minor phase. Analytical procedures: We studied the speciation of silica polymorphs to characterize the shock, using SEM imaging, Ra- man spectroscopy, CL imaging and spectroscopy. Further details can be found in [7]. Results: According to the CL spectra [7-9], cristobalite, tridymite, high-pressure silica glass, stishovite and seifertite, are all present. Special emphasis is made on stishovite and seifertite, which, like in shergottites, exhibit specific textural features [7]. Cathodoluminescence spectra characteristic of high-pressure sil- ica phases: glass, stishovite and seifertite have been recorded in addition to the original low-pressure phases. The remanence of cristobalite and tridymite underscores a significant heterogeneity of the shock supported by the rock.
    [Show full text]
  • Unit 2 Matter and Chemical Change
    TOPIC 5 The Periodic Table By the 1850s, chemists had identified a total of 58 elements, and nobody knew how many more there might be. Chemists attempted to create a classification system that would organize their observations. The various “family” systems were useful for some elements, but most family relationships were not obvious. What else could a classification system be based on? By the 1860s several scientists were trying to sort the known elements according to atomic mass. Atomic mass is the average mass of an atom of an element. According to Dalton’s atomic theory, each element had its own kind of atom with a specific atomic mass, different from the Figure 2.31 Dmitri atomic mass of any other elements. One scientist created a system that Ivanovich Mendeleev was so accurate it is still used today. He was a Russian chemist named was born in Siberia, the Dmitri Mendeleev (1834–1907). youngest of 17 children. Mendeleev Builds a Table Mendeleev made a card for each known element. On each card, he put data similar to the data you see in Figure 2.32. Figure 2.32 The card above shows modern values for silicon, rather than the ones Mendeleev actually used. His values were surprisingly close to modern ones. The atomic mass measurement indicates that silicon is 28.1 times heavier than hydrogen. You can observe other properties of silicon in Figure 2.33. Mendeleev pinned all the cards to the wall, in order of increasing atomic mass. He “played cards” for several Figure 2.33 The element silicon is melted months, arranging the elements in vertical columns and and formed into a crystal.
    [Show full text]