A K E R P H O N E F O R ® P E C A H S R O T & O T O F F U E I C B L E Quick Start Guide Simple “Pairing” with a Using the SP100

1 2 Making a call Using your mobile phone’s keypad 1. Dial number on keypad. 2. Press phone’s “send”key. Using voice-dialing (if supported by your phone and voice tags are recorded) 1. Press and release once (See Fig.7). You’ll hear 1 short beep while doing this. 2. You’ll then hear the voice-activation Turn the JABRA SP100 on. Press and hold the multi-function button tone; say the name of the person you and the mute button until you see a solid blue wish to call. light (approximately 5 seconds), then release. Ending a call Press and release once (See Fig. 7) OR 3 4 End call from your mobile phone’s keypad. Answering a call After you hear the ring tone, press and release once (See Fig. 7) OR Answer the call with your mobile phone’s keypad. You may then need to transfer the call to the speakerphone by pressing and releasing once (depending on your phone). Muting a call Set your Bluetooth phone to “discover”the Your phone should find the “JABRA SP100” To enable mute press the mute button for speakerphone by following your phone’s speakerphone and ask if you want to pair one second. You’ll see alternating yellow instruction guide.Typically, the steps involve with it. Confirm by pressing “yes”or “ok”. and blue flashes. To disable mute function going to a “setup”,“connect”, or “Bluetooth” press the mute button briefly. menu on your phone and then selecting the Using the office mode option to “discover”a Bluetooth device*. Office mode creates the appropriate (Example from a shown above) sound sensitivity to provide optimal performance of the JABRA SP100 in the 5 6 office or home environment. After pressing and holding the mute button for 5 seconds you will see the blue LED flash rapidly and hear a short beep.To return to normal mode, repeat the above action.

Enter passkey or PIN = 0000 (4 zeros), then If pairing was successful, the JABRA SP100 is press “yes”or “ok” ready for use and its blue indicator light will briefly flash rapidly before going back to flashing blue every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to re- Figure 7. attempt pairing. (See steps 3–5 above)

* Phone-specific pairing instructions can be found online at www.jabra.com/fscs A K E R P H O N E F O R ® P E C A H S R O T & O T O F F U E I C B L E Quick Sales Guide JABRA SP100 Key Features:

Mobility – JABRA SP100 can be used in any setting: in car, in the office or at home Convenience – No installation required, light weight, portable Sound performance – High performance 96 dB speaker (2 watts) delivers outstanding audio clarity in any environment Multiple charging options – JABRA SP100 comes complete with two 1.2-volt (AA) rechargeable batteries, AC adaptor and the vehicle power charger. It can also operate with the standard non-chargeable 1.5-volt (AA) alkaline batteries Added privacy – Built in mute button for added privacy 2 year warranty

Compatibility About JABRA

Compatible with all Bluetooth mobile phones (BT JABRA is the foremost brand in innovative hands-free version 1.1) with headset and hands-free profiles. communication solutions for the mobile consumer market. JABRA products are available at more than 70,000 retailers worldwide, including key national GSM Information and Sales Contacts operators, key consumer electronic chains and mobile For information on JABRA stockists and phone specialists. JABRA is part of GN Netcom. More information can be found on the website at distributors visit www.jabra.com/partnercenter and see the international distributors section. www.jabra.com

What’s in the Package? Visor Vehicle Suction Clip AC Mount 2 x User Power JABRA Power Rechargable Manual Adaptor Charger SP100 Batteries