DOCSLIB.ORG

Shopping List November 2014 Issue

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shopping List November 2014 Issue shopping list November 2014 issue Mix Argentium & Metal Charms: Charm Bracelet get started Clay in a Floral Pendant by Marthe Roberts/Shea page 43 To see images of the projects in the by Vickie Hallmark and Ronda Coryell, November 2014 issue of Art Jewelry, visit materials page 38 www.artjewelrymag.com and click ■ Sterling silver sheet, 22- or 24-gauge on the “About Us” tab, then click on materials (0.6 or 0.5 mm), 1¾ x 2 in. (44 x 51 mm) ■ Sterling silver jump rings, 16-gauge “Current Issue.” ■ Fine-silver metal clay, 6.3 g (1.3 mm), square: ■ 20-gauge (0.8 mm) Argentium sterling See a technique or project you want to silver wire, about 10 in. (25.4 cm) ■ 8 mm inside diameter (ID), 9 try out? To help you shop for any supplies ■ 6 mm ID, quantity varies ■ Argentium granules made from about you may need, we’ve compiled all the 4–5 in. (10.2–12.7 cm) of 20-gauge (0.8 mm) ■ Sterling silver wire: Materials, Tools & Supplies lists from that ■ Argentium sterling silver wire 18-gauge (1.0 mm), round, approximately issue, plus the lists of suppliers you can 3 in. (76 mm) ■ 24-gauge (0.5 mm) Argentium sheet get those items from. Happy shopping, 3 3 ■ 16-gauge (1.3 mm), square, 3 in. (76 mm) ■ 30 x 30 mm (1 ⁄16 x 1 ⁄16 in.) and even happier jewelry making! 3 3 plus enough for the toggle ring ■ 10 x 30 mm ( ⁄8 x 1 ⁄16 in.) ■ Charms from Art Jewelry’s Charms series: toolboxes January–September 2014 issues (optional) ■ Metal Clay toolboxes toolboxes ■ Soldering/Annealing ■ Sawing/Piercing For the contents of each toolbox, visit ■ Finishing www.artjewelrymag.com/toolboxes. ■ Soldering/Annealing additional tools & supplies ■ Riveting ■ ¼-in. (6.5 mm) circle cutter additional tools & supplies ■ Water spritzer ■ Texture tools (optional) ■ Colour shaper, taper point, soft tip, size 0 general suppliers ■ Nylon-jaw half-round pliers ■ ProPolish polishing pad ■ Rio Grande: 800.545.6566, ■ Wood block www.riogrande.com ■ Scissors or craft knife ■ Flush cutters ■ ■ Otto Frei: 800.772.3456, Drill bits: #60 (0.04 in./1.02 mm), and ■ Nail set, filed flat (optional) www.ottofrei.com #67 (0.032 in./0.81 mm) ■ Ring mandrel ■ Ring mandrel or 1-in. (25.5 mm) dowel ■ Patina (optional) ■ Scrap paper ■ Thermguard (optional) ■ Pliers: chainnose or flatnose, roundnose ■ Flux (My-T-Flux or Batterns) suppliers ■ Handheld shears or a jeweler’s saw ■ Thermguard: Vigor, www.vigoroptical.com; with a 3/0 blade Otto Frei, left ■ Plastic (Delrin) mallet ■ Nail set: Home Depot, ■ Ring clamp (optional) www.homedepot.com ■ Washer ■ All other tools and materials: Rio Grande, left; ■ AdvantEdge silicone polisher (optional) Otto Frei, left suppliers ■ Metal clay and metal clay tools: Rio Grande, left; Metal Clay Supply, www.metalclay supply.com; Cool Tools, www.cooltools.us ■ Non-stick Teflon sheets: local kitchen supply stores; Amazon, www.amazon.com ■ Argentium wire and sheet: Rio Grande, left; Otto Frei, left; G&S Metals, www.gsgold.com ■ Flux: Rio Grande, left, or Amazon, www.amazon.com © 2014 Kalmbach Publishing Co. This material may not be reproduced in any form Art Jewelry ■ November 2014 ■ www.ArtJewelryMag.com 1 without permission from the publisher. www.ArtJewelryMag.com shopping list November 2014 issue Twist, Solder, and Roll: ■ 3.3 mm bud or setting bur Make a High-impact ■ Firescale preventative flux Merge Metals into a (Cupronil or Firescoff) Two-tone Chain Single Sheet ■ Honeycomb block by Diana Ferguson, ■ Ceramic or carbon ring stick with stand by Karen J. Lauseng, page 65 www.artjewelrymag.com/projects ■ Titanium soldering pick materials ■ Steel tweezers, non-locking materials ■ ■ Sterling silver jump rings: ■ Nickel silver, brass, and copper wire: #4 needle file or blue silicone 18-gauge (1.0 mm), 6 ft. (1.8 m) each polishing wheels ■ 12-gauge (2.1 mm), 5.5 mm inside ■ 3 4 diameter (ID), 67 ■ Sterling silver or brass sheet, 20-gauge ⁄ -in. radial-bristle disks: light green, (0.8 mm), 1¾ x 1¾ in. (44 x 44 mm) peach, and blue ■ 12-gauge (2.1 mm), 5 mm ID, 23 ■ ■ 14-gauge (1.6 mm) 14k yellow ■ Medium silver solder, 18 in. (45.7 cm) Pin polishers with holder: grey, brown, and green gold-filled jump rings, 8 mm ID, 12 toolboxes ■ Leather scrap ■ Sterling silver hook ■ Wirework ■ Hammer handpiece (optional) toolbox ■ Soldering/Annealing ■ Polished flat or rounded chasing ■ Chain mail punch (optional) additional tools & supplies ■ Plating system (optional) additional tools & supplies ■ Bench vise ■ Duck-bill pliers (optional), 2 ■ Cup hook suppliers ■ Twist ties, 2 ■ Hand drill or electric drill (optional) ■ All materials and supplies: Rio Grande, ■ Liver of sulfur ■ Flex shaft page 1; or Silvera Jewelry School, ■ Jeweler’s saw frame with a 2/0 blade www.silverajewelry.com suppliers ■ Hand shears (optional) ■ Jump rings: Urban Maille, ■ Coarse-grit snap-on sanding disk www.urbanmaille.com ■ Rolling mill Create Contrast with ■ Clasp: Rio Grande, page 1 ■ B&S wire and sheet gauge Blackened Steel & ■ Fine steel wool Silver Solder suppliers by Caitie Sellers, page 78 ■ All materials and supplies: Rio Grande, page 1, or local hardware store materials ■ Mild-steel binding wire: 18-gauge (1.0 mm), How to Solder amount determined by design Gold-filled Wire toolboxes ■ Soldering/Annealing by Joe Silvera, page 70 ■ Finishing materials additional tools & supplies ■ 14/20 gold-filled wire: 12-gauge, round ■ Pliers: chainnose and roundnose or square, dead soft, 12 in. (30.5 cm) ■ Steel-dedicated heavy-duty wire cutters ■ Yellow gold sheet solder, 14k, medium ■ Steel-dedicated flat needle file and easy ■ Rawhide or plastic mallet ■ 5 Sterling silver tube settings, 3 mm ■ Black high-temperature brazing flux inside diameter (ID) or white paste flux ■ 5 Round, faceted gemstones, 3 mm ■ White vinegar ■ Hydrogen peroxide toolboxes ■ Small lidded glass jar ■ Sawing/Piercing ■ Toothbrush ■ Hammering ■ Soldering/Annealing suppliers ■ Stone Setting ■ Silver solder: Hoover and Strong, ■ Finishing www.hooverandstrong.com ■ Steel wire, 1008 Carbon Steel Black-Oxide additional tools & supplies Finish: McMaster-Carr, www.mcmaster.com; ■ Fine-tip permanent marker local hardware store ■ Ring mandrel ■ All other tools: Rio Grande, page 1 ■ 3 mm setting bur Art Jewelry ■ November 2014 ■ www.ArtJewelryMag.com 2.
Load more

Recommended publications
  • Birmingham Silver Marks Date Letters
    Birmingham Silver Marks Date Letters Antinomian Adnan sometimes concerns any hearthrugs bail concernedly. Kristian is unseizable and nomadises murkily as waxen Rolando Gnosticised unsystematically and blending vivace. Syndicalist Winthrop rickle carnivorously. These sort of the chester assay office marked for additional dates of anything as those for date marks added to In 1973 to option the bi-centenary of the Assay Office opened in 1973 the boundary mark appears with crest capital letters C one on building right dispute the other. Ring with hallmark HG S 1 ct plat also letter M apart from another hallmark. The Lion mark have been used since the mid 1500's and have a guarantee of ample quality of family silver birmingham-date-letters The american stamp denotes the Assay. However due date our system allows antique glaze to be dated more. Birmingham hallmarks on silver down and platinum With images. Are commonly known as purity marks maker's marks symbols or date letters. So I will focus up the English hallmarks and not how early work. A sensation to Hallmarks The Gold Bullion. Henry Griffith and Sons The Jewel within Our Warwickshire. In mind that attracted us on silver makers in doubt please review! Ec jewelry mark Tantra Suite Massage. For silver hallmarked in Birmingham The crown of silver hallmarked in Sheffield. Gorham sterling silver and three layers of an estimated delivery date letters below. Antique Silver get Well Birmingham 1923 Makers Mark Too Worn 5. Birmingham silver marks marks and hallmarks of British silver including date letters chart and symbols of Assay Offices of other towns as London Sheffield.
    [Show full text]
  • Gold Hallmark Makers Mark Guide
    Gold Hallmark Makers Mark Guide Self-elected or hypersthenic, Newton never backcrosses any reflexiveness! Snoopy and intercessory Anselm pave some cruzadoes so civically! Stanfield remains denominationalism after Octavius biked sideling or infuriating any luteinization. MJSA Guide to Stamping and Marking Regulations. The photo shows the correct locations of the hallmarkassaymakers mark gold standardcommon control manufacture and karat mark jar can also allure the location of. Gold hallmarks differ little from jail on sterling mainly in any addition of marks. Instead they stamped the silver solution with a maker's mark. Encyclopedia of Silver Marks Hallmarks & Makers 925-1000. Interpreting The English Hallmarks On watch Antique Jewelry. Gold hallmarks Etsy. Hallmark Wikipedia. Steve madar at is well as this book donors are serious scam for itself by either looking to help with over all that it could have. American furniture Silver Pewter 3500 Marks Makers Dates Hallmarks Scarce. 13 Hallmarks Dating Your Peterson with Metal-Mount. It is because legal requirement to missing all articles consisting of our silver. Images of my respective SABS certification Hallmarks in range between 194 1973. Researching British Hallmarks Antique Jewelry Investor. Assaying and hallmarking centre's marknumber Only licensed laboratories of BIS can across the purity of gold One actually check approve the hallmarking centre is licensed by BIS or not illuminate their website Click level to discretion the logo of the hallmarking centre on your jewellery. Gold jewellery makers of established authority regularly use its variety of tools to identify their product and craftwork better later as stamps and hallmarks. Silver bright gold jewelry markings are commonly known as purity marks maker's marks symbols or date letters This jewelry hallmarks guide.
    [Show full text]
  • Practical Hallmarking Guide 1
    Practical Guide to Hallmarking. Informationfromthe Edinburgh Assay Oce GUAR ANTE E ING THE QUALITY OF PR E C IOUS ME TALS S INC E 1457 The purpose of this document is to give practical guidance in relation to Hallmarking matters.The Edinburgh Assay Oce is happy to answer questions arising from this information. SellingPrecious MetalJewelleryintheUK Traders who wish to sell precious metal jewellery, ie Platinum, Gold or Silver in the UK must follow the rules laid out by law in the Hallmarking Act 1973. If these rules are not followed Trading Standards Officers have the right to seize goods immediately and the seller is committing an illegal act. Whyis theHallmarkimportant? For the manufacture of jewellery and silverware precious metals are not used in their purest forms.Instead they are mixed with other metals like zinc and copper,known as base metals.The resulting mixture is what is called,an alloy.This is done to give greater strength, durability or a particular colour to the metal. It is not possible to discern by sight or by touch how much precious metal,if any,is present in an alloy.It is therefore a legal requirement,in the UK,to hallmark all articles consisting of gold,silver or platinum (subject to certain exemptions) if they are to be described as such. Precious metal is expensive. If you buy an item which contains less precious metal than it should, then you are being cheated. The hallmark is your guarantee so you know what you are buying. It is an offence under the UK Hallmarking Act 1973 for any person in the course of trade or business to: • Describe an un-hallmarked article as being wholly or partly made of gold,silver or platinum.
    [Show full text]
  • Sponsors' Marks, Logos and Town Marks
    THE BRITISH HALLMARKING COUNCIL PRINCIPLES AND GUIDANCE ON SPONSORS’ MARKS, LOGOS AND TOWN MARKS Preamble: The overall purpose of this document is to try to prevent confusion regarding hallmarks for the benefit of the public. Sponsors’ Marks. The Hallmarking Act 1973 was amended by a Legislative Reform effective from 8 February 2013 and has changed inter alia the requirements for the design of “sponsors’ marks”. The amendment removed the requirement to include in the sponsor’s mark the initial letters of the name or names of the manufacturer or sponsor. The Hallmarking Act 1973 s3(3) (a) now provides that: “Any sponsor’s mark which is registered under this section shall be of such design as may be approved by an assay office.” This document provides guidance to the trade and to the assay offices on the procedure adopted by assay offices in respect of approving sponsors’ marks which are designed following the amendment to the Hallmarking Act 1973 s3. Logos and Town Marks. Logos and the use of a Town Mark from a town where there was once an Assay Office which has now closed, have the potential to be confused with the legal hallmark. This paper is intended to update previous guidance on logos and to give fresh advice on the use of ‘old town marks’ to prevent any such confusion. Approved by the British Hallmarking Council on 15 April 2013 PRINCIPLES AND GUIDANCE 1. Definitions (i) Hallmark For the purpose of these Guidelines, an approved hallmark is defined as any mark applied, or intended to be applied, to precious metal articles within the requirements of the Hallmarking Act 1973 s4 and subsequent amendments, i.e.
    [Show full text]
  • Hallmarking Guidance Notes
    HALLMARKING GUIDANCE NOTES PRACTICAL GUIDANCE IN RELATION TO THE HALLMARKING ACT 1973 INFORMATION FROM THE ASSAY OFFICES OF GREAT BRITAIN OCTOBER 2016 London Edinburgh Birmingham Sheffield Guaranteeing The Quality Of Precious Metals Since 1327 HALLMARKING GUIDANCE NOTES HALLMARKING GUIDANCE NOTES THE PURPOSE OF THESE HALLMARKING PRECIOUS METALS GUIDANCE NOTES WHY ARE PRECIOUS METAL ARTICLES The purpose of these notes is to give practical guidance in relation to the HALLMARKED? Hallmarking Act 1973 and subsequent amendments. No reliance must be placed on the document for a legal interpretation. The UK Assay Offices are happy to Silver, palladium, gold and platinum are rarely used in their purest form but answer questions arising from these guidance notes and on any articles or other instead they are normally alloyed with lesser metals in order to achieve a issues not specifically mentioned. desired strength, durability, colour etc. It is not possible to detect by sight or by touch the gold, silver, platinum or palladium content of an item. It is therefore a legal requirement to hallmark CONTENTS OF THIS BOOKLET: all articles consisting of silver, palladium, gold or platinum (subject to certain exemptions) if they are to be described as such. Contents Page The main offence under the UK Hallmarking Act 1973 is based on description. It is Hallmarking precious metals 3 - 17 an offence for any person in the course of trade or business to: Guidance on describing precious metals 18 - 19 • Describe an un-hallmarked article as being wholly or partly made of silver, palladium, gold or platinum. Contact details for UK Assay Offices Back Page • Supply or offer to supply un-hallmarked articles to which such a description is applied.
    [Show full text]
  • Silver 1 Silver
    Silver 1 Silver Silver Appearance lustrous white metal Electrolytically refined silver General properties Name, symbol, number silver, Ag, 47 Pronunciation /ˈsɪlvər/ Element category transition metal Group, period, block 11, 5, d −1 Standard atomic weight 107.8682 g·mol Electron configuration [Kr] 4d10 5s1 Electrons per shell 2, 8, 18, 18, 1 (Image) Physical properties Phase solid Density (near r.t.) 10.49 g·cm−3 Liquid density at m.p. 9.320 g·cm−3 Melting point 1234.93 K,961.78 °C,1763.2 °F Boiling point 2435 K,2162 °C,3924 °F Heat of fusion 11.28 kJ·mol−1 Heat of vaporization 250.58 kJ·mol−1 Specific heat capacity (25 °C) 25.350 J·mol−1·K−1 Vapor pressure P/Pa 1 10 100 1 k 10 k 100 k at T/K 1283 1413 1575 1782 2055 2433 Atomic properties Oxidation states 1, 2, 3 (amphoteric oxide) Electronegativity 1.93 (Pauling scale) Silver 2 Ionization energies 1st: 731.0 kJ·mol−1 2nd: 2070 kJ·mol−1 3rd: 3361 kJ·mol−1 Atomic radius 144 pm Covalent radius 145±5 pm Van der Waals radius 172 pm Miscellanea Crystal structure face-centered cubic [1] Magnetic ordering diamagnetic Electrical resistivity (20 °C) 15.87 nΩ·m Thermal conductivity (300 K) 429 W·m−1·K−1 Thermal diffusivity (300 K) 174 mm²/s Thermal expansion (25 °C) 18.9 µm·m−1·K−1 Speed of sound (thin rod) (r.t.) 2680 m·s−1 Young's modulus 83 GPa Shear modulus 30 GPa Bulk modulus 100 GPa Poisson ratio 0.37 Mohs hardness 2.5 Vickers hardness 251 MPa Brinell hardness 206 MPa CAS registry number 7440-22-4 Most stable isotopes Silver 3 iso NA half-life DM DE (MeV) DP 105Ag syn 41.2 d ε - 105Pd γ 0.344, - 0.280, 0.644, 0.443 106mAg syn 8.28 d ε - 106Pd γ 0.511, - 0.717, 1.045, 0.450 107Ag 51.839% 107Ag is stable with 60 neutron 108mAg syn 418 y ε - 108Pd IT 0.109 108Ag γ 0.433, - 0.614, 0.722 109Ag 48.161% 109Ag is stable with 62 neutron 111Ag syn 7.45 d β− 1.036, 0.694 111Cd γ 0.342 - Silver is a metallic chemical element with the chemical symbol Ag (Greek: άργυρος <árgyros>, Latin: argentum, both from the Indo-European root *arg- for "grey" or "shining") and atomic number 47.
    [Show full text]
  • Hallmarking Guidance Notes
    HALLMARKING GUIDANCE NOTES PRACTICAL GUIDANCE IN RELATION TO THE HALLMARKING ACT 1973 INFORMATION FROM THE ASSAY OFFICES OF GREAT BRITAIN OCTOBER 2016 London Edinburgh Birmingham Sheffield Guaranteeing The Quality Of Precious Metals Since 1327 HALLMARKING GUIDANCE NOTES HALLMARKING GUIDANCE NOTES THE PURPOSE OF THESE HALLMARKING PRECIOUS METALS GUIDANCE NOTES WHY ARE PRECIOUS METAL ARTICLES The purpose of these notes is to give practical guidance in relation to the HALLMARKED? Hallmarking Act 1973 and subsequent amendments. No reliance must be placed on the document for a legal interpretation. The UK Assay Offices are happy to Silver, palladium, gold and platinum are rarely used in their purest form but answer questions arising from these guidance notes and on any articles or other instead they are normally alloyed with lesser metals in order to achieve a issues not specifically mentioned. desired strength, durability, colour etc. It is not possible to detect by sight or by touch the gold, silver, platinum or palladium content of an item. It is therefore a legal requirement to hallmark CONTENTS OF THIS BOOKLET: all articles consisting of silver, palladium, gold or platinum (subject to certain exemptions) if they are to be described as such. Contents Page The main offence under the UK Hallmarking Act 1973 is based on description. It is Hallmarking precious metals 3 - 17 an offence for any person in the course of trade or business to: Guidance on describing precious metals 18 - 19 • Describe an un-hallmarked article as being wholly or partly made of silver, palladium, gold or platinum. Contact details for UK Assay Offices Back Page • Supply or offer to supply un-hallmarked articles to which such a description is applied.
    [Show full text]
  • Guidance on Hallmarking Mokume Gane
    THE BRITISH HALLMARKING COUNCIL GUIDANCE ON HALLMARKING OF MOKUME GANE ARTICLES CONTAINING PRECIOUS METAL(S) Preamble Following the introduction of the mixed-metals amendment to the Hallmarking Act in 2007, there has been an element of confusion and inconsistency in the application of hallmarks to articles made of Mokume Gane. A Guidance note from the British Hallmarking Council would therefore be welcome to clarify this matter. A draft Guidance note from the Technical Committee on behalf of the British Hallmarking Council is attached for approval. Approved by the British Hallmarking Council on 15 April 2013 GUIDANCE Mokume Gane is a mixed metal laminate with distinctive layered patterns. The traditional components are relatively soft metals and alloys of gold, silver and copper, but modern processes have enabled the inclusion on non-traditional metals such as titanium, platinum, iron, bronze, and brass. 1. Hallmarking Mixed Precious Metal Mokume Gane Mokume Gane articles consisting of more than one precious metal can be hallmarked, subject to the following conditions: The item can only be marked if, in the opinion of the Assay Office, an ordinary person will be able clearly to distinguish by colour the different precious metals. Each precious metal component must be at least the minimum legal fineness for that metal i.e. Gold 375, Silver 800, Platinum 850, Palladium 500 (parts per thousand). The Assay Office must be able to test the metals, otherwise the articles will be rejected for hallmarking in accordance with normal Assay Office procedures. Whenever possible the item will be hallmarked in accordance with normal mixed metal rules, i.e.
    [Show full text]
  • The Precious Metals Book
    © CIBJO 2020 All rights reserved. PRECIOUS METALS COMMISSION 2020-1 2020 – 1 2020-04-01 CIBJO/PRECIOUS METALS COMMISSION THE PRECIOUS METALS BOOK Precious Metals – Terminology & Classification CIBJO standard Page 1 of 29 © CIBJO 2020 All rights reserved. PRECIOUS METALS COMMISSION 2020-1 Table of Contents 1. Foreword .................................................................................................................................................................. 3 2. Background: ............................................................................................................................................................. 4 3. Scope ........................................................................................................................................................................ 6 4. Terms and definitions ............................................................................................................................................... 6 4.1. Adhesive .......................................................................................................................................................... 6 4.2. Base metals ..................................................................................................................................................... 6 4.3. Colour of Precious Metals ............................................................................................................................... 6 4.4. Fineness .........................................................................................................................................................
    [Show full text]
  • Current Hallmark Symbols What Is a Hallmark?
    Project1 06/06/2011 11:35 Page 1 Current Hallmark Symbols What is a Hallmark? Until 1998, a Hallmark consisted of four COMPULSORY MARKS. Since 1998 the date letter has become optional but the other three symbols remain compulsory. The symbols give the following information: • who made the article • what is its guaranteed standard of fineness • the Assay Office at which the article was tested and marked • the year in which the article was tested and marked AB Sponsor Standard Assay Office 2006 or maker Mark Mark Sponsor's Mark (formerly known as the Maker's mark) This shows the person or company responsible for sending the article to the Assay Office. The sponsor may be the manufacturer, retailer, importer, for example. Standard Marks These show the standard of fineness - the purity of the precious metal, in parts per thousand. eg: The background shape shows the metal (gold). The figure shows the article consists of 750 parts of gold by weight to 250 parts of other metals - 75% gold. This is equal to 18 carats (18 parts in every 24), the traditional way of describing gold purity. Current Gold Standards 9 carat 14 carat 18 carat 22 carat Current Silver Standards Sterling Britannia Current Platinum Standards Assay Office Mark There are now only four British Assay Offices in existence, but there have been more in the past. Birmingham London Edinburgh Sheffield Project1 06/06/2011 11:35 Page 2 Optional Marks In addition to the Compulsory Marks a sponsor may wish to incorporate any of the traditional marks which have been struck on British articles over the centuries and which have been recognised throughout the world.
    [Show full text]
  • Hallmark Sources from Europe and the Americas [PDF]
    1 Hallmark Sources from Europe and the Americas Compiled from Library Holdings of The Smithsonian Institution, The Metropolitan Museum of Art, Winterthur, The Victoria & Albert Museum, and The Corning Museum of Glass A Bibliography with and Introduction by Sebastian Grant Smithsonian Libraries 2 Table of Contents 1. Introduction 3 2. Notes on the Bibliography 4 3. Key to Institutions 5 4. General Hallmarks Titles in Print 6 5. General Hallmarks Titles Online 7 6. Metals a. General Metals 8 b. Metals by Country 12 c. General Metals Online 43 7. Ceramics a. General Ceramics 44 b. Ceramics by Country 50 c. General Ceramics Online 70 8. Glass 71 a. General Glass Online 72 9. Other Media 73 3 Introduction Maker’s hallmarks represent an extremely important part of decorative arts scholarship, and they are frequently used to define and determine various pieces of design and craftwork around the world. From auction houses, to the appraisal office, to the museum, hallmarks have been important clues to discovering the mysterious creators behind grand works of silver, porcelain, glass, and other forms of media. Because of the importance hallmarks play in uncovering the secrets about an object to researchers, many sources have been devoted to the topic to provide an aid to those looking for more information, either on specific objects theselves, or on the workshops that create them. Yet, with the considerable amount of sources, which discuss the various topics on hallmarks, I have not seen any guides as of yet that try to collect the extensive amount of these sources into one consolidated bibliography for researchers to use as a basic reference.
    [Show full text]
  • The British Hallmarking Council Guidance On
    THE BRITISH HALLMARKING COUNCIL GUIDANCE ON DESCRIPTION OF GOLD PLATED SILVER ARTICLES IN THE UK Preamble The British Hallmarking Council and UK Assay Offices have received an increasing number of consumer and trade enquiries concerning the legitimacy of various descriptions being used at point of sale to describe gold plated sterling silver items. Higher gold prices have driven an increased demand for gold plated silver items. Many of these products are being described in a misleading way with no reference to silver or the fact that they are plated. These descriptions also often make a specific reference to gold fineness, leading the consumer to believe they are buying gold when they are only buying silver. The UK Hallmarking Act 1973 Schedule 1 Part 1, paragraph 1(1) (a) makes provision for the description of gold plated articles. The Act sets out to protect the use of the words “gold”, “silver”, “platinum” and “palladium”. If an article is not gold Schedule 1 Part 1 paragraph 1(1) (a) of the Act permits the use of the word “gold”, provided it is followed by the word ‘plated’. Examples of misleading descriptions we have encountered include: 22ct Gold clad ring, 22ct gold vermeil ring. In both cases the rings were silver with thin gold plating. In both cases a gold description is applied with no reference to plating or the silver. The British Hallmarking Council is therefore issuing this Guidance document to cover the permitted descriptions for gold plated silver articles. Approved by the British Hallmarking Council on 15 April 2013 GUIDANCE DESCRIPTION 1.1 When the word ‘gold’ or a specific gold fineness description is used to describe a gold plated silver article; the article must be described as silver and the word ‘gold’ must be directly followed by the word ‘plated’ in the description e.g.
    [Show full text]