PROFIBUS and Modbus TCP/IP Communication Adapter Modules

Eaton Power Xpert Release PROFIBUS and Modbus TCP/IP communication adapter modules Communication adapter modules provide enhanced capabilities for PXR electronic trip units Features and benefits • Supports ModbusT • Easy setpoint recall with TCP/IP (PXR-ECAM-MTCP) localized data storage or PROFIBUST DP for increased efficiency (PXR-PCAM) protocols during maintenance (ECAM only) • Improve safety with remote breaker control via • Save time with easy programmable discrete I/O configuration via USB connection • Provides intuitive HTML5 Web interface to simplify • At-a-glance troubleshooting configuration and monitoring with front-facing status (ECAM only) LEDs that alert the user to communication status • Small, DIN rail mounted and alarms design with removable terminal blocks offers • Two RJ45 ports allow daisy- space savings and ease of chaining to simplify assembly installation and maintenance wiring (ECAM only) • Compatible with Series NRX DigitripE electronic trip units Catalog numbers Designed for use with Series NRXE NF- and RF- Communication protocol Catalog number frame power air circuit breakers and Power DefenseE Modbus TCP PXR-ECAM-MTCP molded case circuit breakers, the Power XpertE PROFIBUS PXR-PCAM Release (PXR) communications adapter module (CAM) expands the communication capabilities of Trip unit communications pinout (TC) PXR electronic trip units. TC connection pin Signal When used in conjunction with an IoT-based system, 1 +24V 2 0V/C/AGND the PXR-CAMs allow for greater visibility into the 3 RX+/CMM1 facility, process or machine, thus adhering to the 4 RX–/CMM2 design principles of Industry 4.0. 5 TX+/CMM3 6 TX–/CMM4 Power connection pinout (TP) TP connection pin Signal 1 GND 2 +24V 3 0V (24 V return) I/O connections pinout (TD) TD connection pin Signal 1 C 24 Vdc input 2 IN1 5 mA nominal 3 IN2 4 IN3 5 R1 Rated for 6 R2 240 Vac/30 Vdc 2 A maximum 7 C Dimensions in inches (mm) 0.74 (18.8) EXP TC 6 5 4 3 2 1 3 2 1 TP TX–/CMM4 TX+/CMM3 RX–/CMM2 RX+/CMM1 0V/C/AGND +24V 0V +24V GND Cat. No. PXR-ECAM-XXX Style No. 66D2352G0X Serial No. YYMMDDLPXXXX 24 Vdc, 6W max. Config MAC: XX:XX:XX:XX:XX:XX CAM Link Status H.W. XXXXXX 3.35 3.90 F. W. XX:XX:XX See User Manual 4.37 Status for technical support (85.1) (99.1) 1-800-2772 or (111.0) 1-414-440-7100 Link E1 www.eaton.com 24 Vdc 5 mA 240/30 Vac/dc nom. 24 max. 100 C IN1 IN2 IN3 R1 R2 C Link E2 Made in China TD 1 2 3 4 5 6 7 100 1.18 4.38 (30.0) (111.3) System communications architecture overview ■ Ethernet ■ CAM-PXR link Power Defense breakers with PXR electronic trip units Series NRX breakers with PXR or Digitrip electronic trip units Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2018 Eaton Follow us on social media to get the All Rights Reserved Eaton is a registered trademark. latest product and support information. Printed in USA Publication No. PA026005EN / Z21044 All other trademarks are property June 2018 of their respective owners..

Copy Link

Recommended publications

Modbus TCP Master (OPC) User's Manual
Station Automation COM600 3.4 Modbus TCP Master (OPC) User's Manual 1MRS756445 Station Automation COM600 3.4 Issued: 21.12.2007 Version: D/06.11.2009 Modbus TCP Master (OPC) User's Manual Contents: 1. About this manual .................................................................................. 7 1.1. Copyrights ...................................................................................... 7 1.2. Trademarks .................................................................................... 7 1.3. General .......................................................................................... 7 1.4. Document conventions .................................................................. 8 1.5. Use of symbols .............................................................................. 9 1.6. Terminology .................................................................................... 9 1.7. Abbreviations ............................................................................... 11 1.8. Related documents ...................................................................... 12 1.9. Document revisions ..................................................................... 12 2. Introduction ........................................................................................... 13 2.1. Functional overview ..................................................................... 13 2.2. Modbus OPC Server features ...................................................... 14 3. Configuration .......................................................................................
[Show full text]
Modbus Instruction Manual For
Instruction manual Modbus slave interface for digital Mass Flow / Pressure instruments Doc. no.: 9.17.035AC Date: 28-07-2021 ATTENTION Please read this instruction manual carefully before installing and operating the instrument. Not following the guidelines could result in personal injury and/or damage to the equipment. BRONKHORST® Disclaimer The information in this manual has been reviewed and is believed to be wholly reliable. No responsibility, however, is assumed for inaccuracies. The material in this manual is for information purposes only. Copyright All rights reserved. This documentation is protected by copyright. Subject to technical and optical changes as well as printing errors. The information contained in this document is subject to change at any time without prior notification. Bronkhorst High-Tech B.V. reserves the right to modify or improve its products and modify the contents without being obliged to inform any particular persons or organizations. The device specifications and the contents of the package may deviate from what is stated in this document. Symbols Important information. Discarding this information could cause injuries to people or damage to the Instrument or installation. Helpful information. This information will facilitate the use of this instrument. Additional info available on the internet or from your local sales representative. Warranty Bronkhorst® products are warranted against defects in material and workmanship for a period of three years from the date of shipment, provided they are used in accordance with the ordering specifications and the instructions in this manual and that they are not subjected to abuse, physical damage or contamination. Products that do not operate properly during this period may be repaired or replaced at no charge.
[Show full text]
MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1B3
MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1b3 CONTENTS 1 Introduction ...................................................................................................................... 2 1.1 Scope of this document ........................................................................................... 2 2 Abbreviations ................................................................................................................... 2 3 Context ............................................................................................................................. 3 4 General description .......................................................................................................... 3 4.1 Protocol description ................................................................................................. 3 4.2 Data Encoding ......................................................................................................... 5 4.3 MODBUS Data model .............................................................................................. 6 4.4 MODBUS Addressing model .................................................................................... 7 4.5 Define MODBUS Transaction .................................................................................. 8 5 Function Code Categories .............................................................................................. 10 5.1 Public Function Code Definition ............................................................................. 11
[Show full text]
Modbus Signal Output Adapter Quick Start Guide
TM Modbus Signal Output Adapter Quick Start Guide Mini USB Connector Adapter Used to configure adapter settings, provide power to the adapter, and passthrough Overview: communication to the attached sonde. See page 4 for USB passthrough info. Supply Power, 12VDC Provided from external regulated power source (not included). Delivering quality data Modbus I/O Terminal Use either 485 (default) Status LED where and when you or RS-232 terminals. See page 2 for need it most. status indications. Introduction: The 599825 is a communication adapter Safety: for the EXO multiparameter sonde platform. It converts the proprietary Refer to EXO system signal from the water quality sonde into manual for complete safety a Modbus protocol over either RS-232 documentation associated with or RS-485 signals. The adapter simplifies the EXO system. (Available at integration into 3rd party SCADA systems, EXOwater.com) and also features a USB port that Follow all applicable code and supports passthrough communication Magnetic Read Switch directly to the connected sonde. This regulations subject to electrical Used to rediscover feature allows configuration, calibration, wiring and operation of attached sonde. and data transfer without having to the system. disconnect the field cabling. Specifications What’s Included: You’ll also need: Supply Voltage: 9 - 16 VDC or USB 5 VDC Your new 599825 EXO Communication • Flat blade screwdriver for Current Draw Adapter: Adapter comes with: terminal blocks ~20mA typical (@12VDC) • (1) Modbus Adapter • Phillip’s screwdriver
[Show full text]
Modbus RTU SSW900-CRS485-W
Motors | Automation | Energy | Transmission & Distribution | Coatings Modbus RTU SSW900-CRS485-W User’s Guide Modbus RTU User’s Guide Series: SSW900 Software version: 1.2X Language: English Document: 10004628707 / 02 Build 5251 Publication Date: 01/2019 Summary of Revisions The information below describes the reviews made in this manual. Version Revision Description V1.0X R00 First edition V1.1X R01 General revision V1.2X R02 General revision Contents CONTENTS ABOUT THE MANUAL ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 6 ABBREVIATIONS AND DEFINITIONS :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 6 NUMERICAL REPRESENTATION ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 6 DOCUMENTS :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 6 1 MAIN CHARACTERISTICS :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 7 2 MODBUS COMMUNICATION INTRODUCTION :::::::::::::::::::::::::::::::::::::::: 8 2.1 MESSAGE STRUCTURE ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 8 2.2 MODBUS RTU ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 9 3 INTERFACE DESCRIPTION::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 11 3.1 RS485 ACCESSORY :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 11 3.2 CONNECTOR ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
[Show full text]
CAN-To-Flexray Gateways and Configuration Tools
CAN-to-Flexray gateways Device and conﬁ guration tools lexray and CAN net- Listing bus data traffic toring channels it is possi- power management func- Fworks will coexists in (tracing) ble to compare timing rela- tionality offers configurable the next generation or pas- Graphic and text displays tionships and identify timing sleep, wake-up conditions, senger cars. Flexray orig- of signal values problems. and hold times. The data inally designed for x-by- Interactive sending of GTI has developed a manipulation functionality wire applications gains mar- pre-defined PDUs und gateway, which provides has been extended in or- ket acceptance particular- frames two CAN and two Flexray der to enable the user to ap- ly in driver assistance sys- Statistics on nodes and ports. It is based on the ply a specific manipulation tems. Nevertheless, Flexray messages with the Clus- MPC5554 micro-controller. function several times. Also applications need informa- ter Monitor The gateway is intended to available for TTXConnexion tion already available in ex- Logging messages for be used for diagnostic pur- is the PC tool TTXAnalyze, isting CAN in-vehicle net- later replay or offline poses, generating start-up/ which allows simultaneous works. Therefore, CAN-to- evaluation sync frames, and it can be viewing of traffic, carried on Flexray gateways are nec- Display of cycle multi- used with existing software the various bus systems. essary. Besides deeply em- plexing, in-cycle rep- tools. The Flexray/CAN bedded micro-controller etition and PDUs in the The TTXConnexion by gateway by Ixxat is a with CAN and Flexray inter- analysis windows TTControl is a gateway tool configurable PC application faces, there is also a need Agilent also provides an combining data manipula- allowing Flexray messag- for gateway devices as in- analyzing tool for Flexray tion, on-line viewing, and es and signals to be trans- terface modules for system and CAN.
[Show full text]
CAN / RS485 Interface Adapter for SHP Series
Technical Reference Note CAN / RS485 Interface Adapter For SHP Series Total Power: < 1 Watts Input Voltage: 5V Internal Outputs: CAN, RS485, USB, I2C Special Features Product Description The new SHP Extension adapter enables both USB and Controller Area Network (CAN) or RS485 Bus connectivity, providing a complete interface between the • Input Protocols: SHP device and the I2C bus with a simple command set which enables the 1) RS485 using Modbus highest levels of configuration flexibility. 2) CAN using modified Modbus The CAN/RS485 to I2C interface adapter modules connect with CAN Bus • Output Protocol: architectures through CaseRx/CaseTx interfaces found on the SHP case. The I2C with SMBus Support modules communicate with on-board I2C Bus via MODbus Protocol for RS485 Bus and modified MODbus for CANbus. The new adapters now enable the SHP to be used in a host of new ruggedized applications including automotive networks, industrial networks, medical equipment and building automation systems. The RS485/CAN-to-I2C uses 2 Input Protocols and 1 Output Protocol. The Input Protocols used are: RS485 using Modbus (Command Index: 0x01), and CAN using modified Modus (Command Index: 0x02). The Output Protocol use is: I2C with SMBus support (Command Index: 0x80). www.solahd.com [email protected] Technical Reference Note Table of Contents 1. Model Number ………………………….………………………………………………………………. 4 2. General Description ……………………………………………………………………………………. 5 3. Electrical Specifications ……………………………………………………………………………..… 6 4. Mechanical Specification …………………………………………………….….…………………….. 9 5. Hardware Interfaces ………………………………………………………….……………………..... 12 6. Software Interfaces ……………………………………………………………................................ 13 6.1 Adapter Protocol Overview ……………………………………………………………………… 13 6.2 Protocol Transaction …………………………………………………………………………….. 13 6.3 Adapter Command and Response Packets …………………………………………….…..… 14 6.4 Adapter Control Commands ……………………………………………………………..……..
[Show full text]
Table of Contents
Table of Contents Chapter 1 Bus Decode -------------------------------------------------------------- 1 Basic operation --------------------------------------------------------------------------------------------- 1 Add a Bus Decode ----------------------------------------------------------------------------------------------------- 1 Advance channel setting ---------------------------------------------------------------------------------------------- 2 Specially Bus Decode: ------------------------------------------------------------------------------------------------ 4 1-Wire ------------------------------------------------------------------------------------------------------------------- 7 3-Wire ------------------------------------------------------------------------------------------------------------------- 9 7-Segment -------------------------------------------------------------------------------------------------------------- 11 A/D Converter--------------------------------------------------------------------------------------------------------- 14 AcceleroMeter -------------------------------------------------------------------------------------------------------- 17 AD-Mux Flash -------------------------------------------------------------------------------------------------------- 19 Advanced Platform Management Link (APML) ---------------------------------------------------------------- 21 BiSS-C------------------------------------------------------------------------------------------------------------------ 23 BSD ---------------------------------------------------------------------------------------------------------------------
[Show full text]
Of Fieldbus Signals Physical Integrity Testing
RS 232 Link & MODBUS Protocol Checking the Quality of Fieldbus Signals Physical integrity testing Fieldbuses correspond to a series of electrical wires which convey information in digital form between 2 remote devices. A large number Industry of bus protocols are used in the field, in a wide variety of sectors: industry, automotive, building automation, hospitals, etc. Frequently-encountered bus protocols include KNX, DALI, CAN, LIN, FlexRay™, AS-i, Profibus®, RS 485, RS 232, ETHERNET, etc. Automotive In computer networks, the physical layer is the first layer in the OSI (Open Systems Interconnection) model and it is responsible for effective transmission of the electrical or optical signals between devices. It is useful to measure this electrical physical level in order to optimize communication and draw up a diagnosis: change of Building cable, verification of chassis-earth, termination, etc. Automation We are going to look at the details of a test on an RS232 link between a multimeter and a PC with an oscilloscope offering the physical test in accordance with the applicable standards. LOGO METRIX Checking the Quality of Fieldbus Signals Practical case: Physical integrity test of an RS232 bus between a multimeter and the COM1 port of a PC Equipment used • SCOPIX BUS OX 7204: oscilloscope bus analyser • HX0130 probe: voltage probe • HX0190 DB9 board: RS 232 communication board for training purposes • MTX 3283: 100,000-count on-site digital multimeter • SX DMM: data retrieval software for the MTX 3283 Did you know? The MODBUS protocol is a dialogue protocol based on a hierarchical structure involving several devices. Step 1 Step 2 The MTX Mobile MTX 3283 multimeter is connected using an You plug the HX0190 DB9 RS232 link, set to 9,600 bauds with the MODBUS protocol by connection board into the PC’s using the SX-DMM multimeter data processing software.
[Show full text]
Communication Protocol Reference Guide
Communication Protocol Reference Guide 2018-10-08, Rev. 2.0 © Copyright 2018, Nuvation Energy Table of Contents 1. Introduction . 1 1.1. About this Guide. 1 2. Modbus Protocol Support . 2 2.1. Overview . 2 2.1.1. Modbus RTU. 2 2.1.2. Modbus TCP . 2 2.2. Implemented MESA Models . 2 2.2.1. Common Model . 3 2.2.2. S801. 3 2.2.3. S802. 3 2.2.4. S803. 3 2.2.5. End Model . 3 2.3. MESA Model Structure and Nomenclature . 3 2.3.1. Points . 3 2.3.2. Fixed/Repeating Blocks . 3 2.3.3. Unimplemented Points . 4 2.3.4. Scale Factors . 5 2.4. Operational Cases for MESA . 5 2.4.1. External Controller Communicating Over MESA Interface . 5 2.4.2. External Nuvation BMS Monitoring Over MESA Interface . 6 2.5. Accessing MESA Models . 8 3. CAN Bus Protocol Support . 10 3.1. Overview . 10 3.2. CAN Reporting and Commands . 10 3.3. Data Format . 10 Communication Protocol Reference Guide - 2018-10-08, Rev. 2.0 1. Introduction Thank you for choosing Nuvation BMS™ Nuvation BMS™ is an enterprise-grade battery management system with support for various external communication protocols like Modbus RTU, Modbus TCP, and CANBus. Nuvation BMS is conformant with the MESA-Device/Sunspec Energy Storage Model (Draft 3). MESA (mesastandards.org) conformant products share a common communications interface that exposes all the data and control points required for operating an energy storage system. This enables Nuvation BMS to be integrated with other MESA-conformant energy storage hardware or software without the need for custom middleware.
[Show full text]
Modbus Serial Communication Device Type Manager Hardware and Software Requirements EIO0000000233 03/2015
Modbus Serial Communication Device Type Manager EIO0000000233 03/2015 Modbus Serial Communication Device Type Manager User Manual 03/2015 EIO0000000233.05 www.schneider-electric.com The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. If you have any suggestions for improvements or amendments or have found errors in this publication, please notify us. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express written permission of Schneider Electric. All pertinent state, regional, and local safety regulations must be observed when installing and using this product. For reasons of safety and to help ensure compliance with documented system data, only the manufacturer should perform repairs to components. When devices are used for applications with technical safety requirements, the relevant instructions must be followed. Failure to use Schneider Electric software or approved software with our hardware products may result in injury, harm, or improper operating results. Failure to observe this information can result in injury or equipment damage.
[Show full text]
COM600 Series, Version 5.1 Modbus Serial Master (OPC) User's Manual
— COM600 series, Version 5.1 Modbus Serial Master (OPC) User's Manual 1MRS756126 COM600 series, Version 5.1 Issued: 28.3.2018 Version: M/28.3.2018 Modbus Serial Master (OPC) User's Manual Contents: 1. About this manual .................................................................................. 7 1.1. Copyright ........................................................................................ 7 1.2. Disclaimer ..................................................................................... 7 1.3. Conformity ..................................................................................... 8 1.4. Trademarks .................................................................................... 8 1.5. General information ....................................................................... 8 1.6. Document conventions .................................................................. 9 1.7. Use of symbols .............................................................................. 9 1.8. Terminology .................................................................................. 10 1.9. Abbreviations ............................................................................... 11 1.10. Related documents ...................................................................... 12 1.11. Document revisions ..................................................................... 12 2. Introduction ........................................................................................... 13 2.1. General information about the
[Show full text]