Extraction Technologies for Medicinal and Aromatic Plants

Total Page:16

File Type:pdf, Size:1020Kb

Extraction Technologies for Medicinal and Aromatic Plants Extraction Technologies for Medicinal and Aromatic Plants Opinions expressed in the present publication do not necessarily refl ect the views of the United Nations Industrial Development Organization (UNIDO) or the International Centre for Science and High Technology (ICS). Mention of the names of fi rms and commercial products does not imply endorsement by UNIDO or ICS. No use of this publication may be made for resale or for any other commer- cial purpose whatsoever without prior permission in writing from ICS. This is not a formal document and has been produced without formal editing. Coverpage insets include pictures of: Catharanthus roseus (L.) G. Don Taxus baccata L. ICS-UNIDO is supported by the Italian Ministry of Foreign Affairs © United Nations Industrial Development Organization and the International Centre for Science and High Technology, 2008 Earth, Environmental and Marine Sciences and Technologies International Centre for Science and High Technology ICS-UNIDO, AREA Science Park Padriciano 99, 34012 Trieste, Italy Tel.: +39-040-9228108 Fax: +39-040-9228136 E-mail: [email protected] Extraction Technologies for Medicinal and Aromatic Plants Scientifi c Editors: Sukhdev Swami Handa Suman Preet Singh Khanuja Gennaro Longo Dev Dutt Rakesh INTERNATIONAL CENTRE FOR SCIENCE AND HIGH TECHNOLOGY Trieste, 2008 Contributors Chapter 1 An Overview of Extraction Techniques for Medicinal and Aromatic Plants Sukhdev Swami Handa Senior Specialist, Industrial Utilization of Medicinal and Aromatic Plants Earth, Environmental and Marine Sciences and Technologies, ICS-UNIDO, AREA Science Park, Bldg. L2, Padriciano 99, 34012 Trieste, Italy Chapter 2 Role of Process Simulation to Extraction Technologies for Medicinal and Aromatic Plants Maurizio Fermeglia DICAMP-CASLAB, University of Trieste and Scientifi c Consultant for Process Simulation, ICS-UNIDO, AREA Science Park, Bldg. L2, Padriciano 99, 34012 Trieste, Italy Chapter 3 Maceration, Percolation and Infusion Techniques for the Extraction of Me- dicinal and Aromatic Plants Janardan Singh Scientist E II, Botany and Pharmacognosy, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India Chapter 4 Hydrolytic Maceration, Expression and Cold Fat Extraction Anil Kumar Singh Scientist F, Essential Oil Analysis Laboratory, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India Chapter 5 Decoction and Hot Continuous Extraction Techniques Sudeep Tandon and Shailendra Rane Scientist EI, Chemical Engineer, Process and Product Development Division, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India CONTRIBUTORS Chapter 6 Aqueous Alcoholic Extraction of Medicinal and Aromatic Plants by Fermentation Chander Kant Katiyar Director, Herbal Drug Research, Ranbaxy Research Labs, R&D-II, Plot 20, Sector 18, Udyog Vihar Industrial Area, Gurgaon, India Chapter 7 Distillation Technology for Essential Oils Sudeep Tandon Scientist EI, Chemical Engineer, Process and Product Development Division, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India Chapter 8 Microdistillation, Thermomicrodistillation and Molecular Distillation Techniques Vishwas Govind Pangarkar Professor, University Institute of Chemical Technology, Nathalal Parekh Marg Manunga (East) Mumbai 400 019, India Chapter 9 Solid Phase Micro-extraction and Headspace Trapping Extraction Rama Kant Harlalka Director, Nishant Aromas 424, Milan Industrial Estate, Cotton Green Park, Mumbai 200 033, India Chapter 10 Supercritical Fluid Extraction of Medicinal and Aromatic Plants: Fundamen- tals and Applications Alberto Bertucco1 and Giada Franceschin2 1Professor, Dipartimento di Principi ed Impianti di Ingegneria Chimica “I. Sor- gato”, University of Padova, Via Marzolo 9, 35131 Padova, Italy 2DIPIC - Department of Chemical Engineering, University of Padova, via Mar- zolo 9, 35131 Padova, Italy Chapter 11 Process-scale HPLC for Medicinal and Aromatic Plants Madan Mohan Gupta1 and Karuna Shanker2 1Head, Analytical Chemistry Division, Central Institute of Medicinal and Aro- matic Plants, P. O. CIMAP, Lucknow, India 2Scientist, Analytical Chemistry Division, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India Chapter 12 Flash Chromatography and Low Pressure Chromatographic Techniques for Separation of Phytomolecules Sunil Kumar Chattopadhyay Scientist F, Process and Product Development Division, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India 4 EXTRACTION TECHNOLOGIES FOR MEDICINAL AND AROMATIC PLANTS Chapter 13 Counter-current Chromatography Santosh Kumar Srivastava Scientist E II, Phytochemistry, Central Institute of Medicinal and Aromatic Plants, P. O. CIMAP, Lucknow, India Chapter 14 Quality Control of Medicinal and Aromatic Plants and their Extracted Prod- ucts by HPLC and High Performance Thin Layer Chromatography Karan Vasisht Professor of Pharmacognosy, University Institute of Pharmaceutical Scienc- es, Panjab University, Chandigarh 160 014, India 5 EXTRACTION TECHNOLOGIES FOR MEDICINAL AND AROMATIC PLANTS Preface Medicinal plants are the richest bioresource of drugs for tra- ditional systems of medicine, modern medicines, nutraceuticals, food sup- plements, folk medicines, pharmaceutical intermediates and chemical enti- ties for synthetic drugs. Aromatic plants are a source of fragrances, fl avors, cosmeceuticals, health beverages and chemical terpenes. Medicinal and aromatic plants (MAPs) are traded as such in bulk from many developing countries for further value addition in developed countries. The fi rst step in the value addition of MAP bioresources is the production of herbal drug preparations (i.e. extracts), using a variety of methods from simple tradi- tional technologies to advanced extraction techniques. Extraction (as the term is pharmaceutically used) is the separa- tion of medicinally active portions of plant (and animal) tissues using selec- tive solvents through standard procedures. Such extraction techniques sep- arate the soluble plant metabolites and leave behind the insoluble cellular marc. The products so obtained from plants are relatively complex mixtures of metabolites, in liquid or semisolid state or (after removing the solvent) in dry powder form, and are intended for oral or external use. These include classes of preparations known as decoctions, infusions, fl uid extracts, tinc- tures, pilular (semisolid) extracts or powdered extracts. Such preparations have been popularly called galenicals, named after Galen, the second cen- tury Greek physician. The purpose of standardized extraction procedures for crude drugs (medicinal plant parts) is to attain the therapeutically desired portions and to eliminate unwanted material by treatment with a selective solvent known as menstruum. The extract thus obtained, after standardiza- tion, may be used as medicinal agent as such in the form of tinctures or fl uid extracts or further processed to be incorporated in any dosage form such as tablets and capsules. These products all contain complex mixture of many medicinal plant metabolites, such as alkaloids, glycosides, terpenoids, fl a- vonoids and lignans. In order to be used as a modern drug, an extract may be further processed through various techniques of fractionation to isolate individual chemical entities such as vincristine, vinblastine, hyoscyamine, hyoscine, pilocarpine, forskolin and codeine. The industrial processing of MAPs starts with the extraction of the active components using various technologies. The general techniques of medicinal plant extraction include maceration, infusion, percolation, di- gestion, decoction, hot continuous extraction (Soxhlet), aqueous-alcoholic extraction by fermentation, counter-current extraction, microwave-assisted extraction, ultrasound extraction (sonication), supercritical fl uid extraction, and phytonic extraction (with hydrofl uorocarbon solvents). For aromatic plants, hydrodistillation techniques (water distillation, steam distillation, water and steam distillation), hydrolytic maceration followed by distillation, expression and enfl eurage (cold fat extraction) may be employed. Some of 7 PREFACE the latest extraction methods for aromatic plants include headspace trap- ping, solid phase micro-extraction, protoplast extraction, microdistillation, thermomicrodistillation and molecular distillation. With the increasing demand for herbal medicinal products, nu- traceuticals, and natural products for health care all over the world, medicinal plant extract manufacturers and essential oil producers have started using the most appropriate extraction technologies in order to produce extracts and essential oils of defi ned quality with the least variations from batch to batch. Such approach has to be adopted by MAP-rich developing countries in order to meet the increasing requirement of good quality extracts and es- sential oils for better revenue generation within the country, as well as for capturing this market in developed countries. The basic parameters infl uencing the quality of an extract are the plant parts used as starting material, the solvent used for extraction, the manufacturing process (extraction technology) used with the type of equip- ment employed, and the crude-drug:extract ratio. The use of appropriate extraction technology, plant material, manufacturing equipment, extraction method and solvent and the adherence to good manufacturing practices certainly help to produce a good quality extract. From laboratory
Recommended publications
  • Extraction of Wax from Sorghum Bran •
    i EXTRACTION OF WAX FROM SORGHUM BRAN • 1 HSIEN-WEN HSU <& . ***£/ B. S., National Taiwan University, China, 1951 A THESIS » submitted in partial fulfillment of the requirements for the degree MASTER OF SCIENCE - Department of Chemical Engineering KANSAS STATE COLLEGE OF AGRICULTURE AND APPLIED SCIENCE - 1955 » k Lo i~i ii Q^cu^v^Js TABLE OF CONTENTS INTRODUCTION 1 PREVIOUS WORK 3 MATERIALS 6 GLASS SOXHLET EXTRACTION AND ANALYSIS OF WAX AND OIL IN MISCELLA 7 Procedure of Using Soxhlet Extractor 7 Separation of Wax from Oil by the Acetone Method.. 8 Summary of Results 9 PILOT PLANT EXTRACTION 15 SEPARATION OF WAX AND OIL 16 Effect of Temperature in the Acetone Method 16 Urea Complex Method of Separation. 17 Theory 17 Experimental Procedure 22 Summary of Results 26 COST ESTIMATION OF A WAX RECOVERY PLANT 29 DISCUSSION 30 CONCLUSIONS 35 ACKNOWLEDGMENTS 36 BIBLIOGRAPHY 37 APPENDIX 39 INTRODUCTION i One of the functions of the Agricultural Experiment Station is the never ending search for means of better and fuller utilization of the agri- cultural products that are of particular interest in the state of Kansas. In line with this broad objective, the extraction of economically valuable lipid materials from the sorghum bran has been studied in several theses in the Departments of Chemical Engineering and Chemistry in recent years. Generally the emphasis has b. en placed upon either the chemical and physical properties of these lipides or the equipment design and performance for the solvent ex- traction operation. A brief review of the previous work is presented in the ensuing section.
    [Show full text]
  • The Separation of Three Azeotropes by Extractive Distillation by An-I Yeh A
    The separation of three azeotropes by extractive distillation by An-I Yeh A thesis submitted in partial fulfillment of the requirement for the degree of Master of Science in Chemical Engineering Montana State University © Copyright by An-I Yeh (1983) Abstract: Several different kinds of extractive distillation agents were investigated to affect the separation of three binary liquid mixtures, isopropyl ether - acetone, methyl acetate - methanol, and isopropyl ether - methyl ethyl ketone. Because of the small size of the extractive distillation column, relative volatilities were assumed constant and the Fenske equation was used to calculate the relative volatilities and the number of minimum theoretical plates. Dimethyl sulfoxide was found to be a good extractive distillation agent. Extractive distillation when employing a proper agent not only negated the azeotropes of the above mixtures, but also improved the efficiency of separation. This process could reverse the relative volatility of isopropyl ether and acetone. This reversion was also found in the system of methyl acetate and methanol when nitrobenzene was the agent. However, normal distillation curves were obtained for the system of isopropyl ether and methyl ethyl ketone undergoing extractive distillation. In the system of methyl acetate and methanol, the relative volatility decreased as the agents' carbon number increased when glycols were used as the agents. In addition, the oxygen number and the locations of hydroxyl groups in the glycols used were believed to affect the values of relative volatility. An appreciable amount of agent must be maintained in the column to affect separation. When dimethyl sulfoxide was an agent for the three systems studied, the relative volatility increased as the addition rate increased.
    [Show full text]
  • List of OBC Approved by SC/ST/OBC Welfare Department in Delhi
    List of OBC approved by SC/ST/OBC welfare department in Delhi 1. Abbasi, Bhishti, Sakka 2. Agri, Kharwal, Kharol, Khariwal 3. Ahir, Yadav, Gwala 4. Arain, Rayee, Kunjra 5. Badhai, Barhai, Khati, Tarkhan, Jangra-BrahminVishwakarma, Panchal, Mathul-Brahmin, Dheeman, Ramgarhia-Sikh 6. Badi 7. Bairagi,Vaishnav Swami ***** 8. Bairwa, Borwa 9. Barai, Bari, Tamboli 10. Bauria/Bawria(excluding those in SCs) 11. Bazigar, Nat Kalandar(excluding those in SCs) 12. Bharbhooja, Kanu 13. Bhat, Bhatra, Darpi, Ramiya 14. Bhatiara 15. Chak 16. Chippi, Tonk, Darzi, Idrishi(Momin), Chimba 17. Dakaut, Prado 18. Dhinwar, Jhinwar, Nishad, Kewat/Mallah(excluding those in SCs) Kashyap(non-Brahmin), Kahar. 19. Dhobi(excluding those in SCs) 20. Dhunia, pinjara, Kandora-Karan, Dhunnewala, Naddaf,Mansoori 21. Fakir,Alvi *** 22. Gadaria, Pal, Baghel, Dhangar, Nikhar, Kurba, Gadheri, Gaddi, Garri 23. Ghasiara, Ghosi 24. Gujar, Gurjar 25. Jogi, Goswami, Nath, Yogi, Jugi, Gosain 26. Julaha, Ansari, (excluding those in SCs) 27. Kachhi, Koeri, Murai, Murao, Maurya, Kushwaha, Shakya, Mahato 28. Kasai, Qussab, Quraishi 29. Kasera, Tamera, Thathiar 30. Khatguno 31. Khatik(excluding those in SCs) 32. Kumhar, Prajapati 33. Kurmi 34. Lakhera, Manihar 35. Lodhi, Lodha, Lodh, Maha-Lodh 36. Luhar, Saifi, Bhubhalia 37. Machi, Machhera 38. Mali, Saini, Southia, Sagarwanshi-Mali, Nayak 39. Memar, Raj 40. Mina/Meena 41. Merasi, Mirasi 42. Mochi(excluding those in SCs) 43. Nai, Hajjam, Nai(Sabita)Sain,Salmani 44. Nalband 45. Naqqal 46. Pakhiwara 47. Patwa 48. Pathar Chera, Sangtarash 49. Rangrez 50. Raya-Tanwar 51. Sunar 52. Teli 53. Rai Sikh 54 Jat *** 55 Od *** 56 Charan Gadavi **** 57 Bhar/Rajbhar **** 58 Jaiswal/Jayaswal **** 59 Kosta/Kostee **** 60 Meo **** 61 Ghrit,Bahti, Chahng **** 62 Ezhava & Thiyya **** 63 Rawat/ Rajput Rawat **** 64 Raikwar/Rayakwar **** 65 Rauniyar ***** *** vide Notification F8(11)/99-2000/DSCST/SCP/OBC/2855 dated 31-05-2000 **** vide Notification F8(6)/2000-2001/DSCST/SCP/OBC/11677 dated 05-02-2004 ***** vide Notification F8(6)/2000-2001/DSCST/SCP/OBC/11823 dated 14-11-2005 .
    [Show full text]
  • Solvent Extraction Instruments Brochure
    ROT-X-TRACT SERİES Solvent Extraction Instruments PRODUCT BROCHURE ELEMENTEL ANALİTİK ve BİO TEKNOLOJİK SİSTEMLER | Folkart Towers - Adalet Mah. Manas Blv. No: 39/3408 Bayraklı/IZMIR, TURKEY, PHONE-FAX: +90 232 472 17 11 • [email protected] • www.elementel.com 2 Content www.elementel.com CONTENT ORGANOMATION SOLVENT EXTRACTORS OVERVIEW ..................................................................................... 3 ROT-X-TRACT-S SERIES ROTARY SOLID-LIQUID SOXHLET EXTRACTORS ........................................................ 5 ROT-X-TRACT-LC SERIES CORNING ACCELERATED ONE-STEP LIQUID-LIQUID EXTRACTORS ....................... 7 ROT-X-TRACT SOLVENT EXTRACTION INSTRUMENTS ACCESSORIES AND REPLACEMENT PARTS ............ 9 Organomation Solvent Extraction Instruments Overview 3 www.elementel.com Organomation Solvent Extractors Overview You are in the lab and need to run multiple extractions at once. First you set the Soxhlet extractors up on individual heating mantles or baths. Next, tubing is individually attached to each of the condensers. There are dozens of tubes to deal with, and multiple heating mantles to monitor. The problem with this arrangement is that in the end, you have spent more time assembling and monitoring your apparatuses than performing the actual chemistry. To conserve valuable bench space, all samples are arranged in a circle and the instrument rotates allowing each sample to be accessed from the front. Individual condensers are connected to the centrally located water manifold through quick disconnect fittings.
    [Show full text]
  • Distillation 65 Chem 355 Jasperse DISTILLATION
    Distillation 65 Chem 355 Jasperse DISTILLATION Background Distillation is a widely used technique for purifying liquids. The basic distillation process involves heating a liquid such that liquid molecules vaporize. The vapors produced are subsequently passed through a water-cooled condenser. Upon cooling, the vapor returns to it’s liquid phase. The liquid can then be collected. The ability to separate mixtures of liquids depends on differences in volatility (the ability to vaporize). For separation to occur, the vapor that is condensed and collected must be more pure than the original liquid mix. Distillation can be used to remove a volatile solvent from a nonvolatile product; to separate a volatile product from nonvolatile impurities; or to separate two or more volatile products that have sufficiently different boiling points. Vaporization and Boiling When a liquid is placed in a closed container, some of the molecules evaporate into any unoccupied space in the container. Evaporation, which occurs at temperatures below the boiling point of a compound, involves the transition from liquid to vapor of only those molecules at the liquid surface. Evaporation continues until an equilibrium is reached between molecules entering and leaving the liquid and vapor states. The pressure exerted by these gaseous molecules on the walls of the container is the equilibrium vapor pressure. The magnitude of this vapor pressure depends on the physical characteristics of the compound and increases as temperature increases. In an open container, equilibrium is never established, the vapor can simply leave, and the liquid eventually disappears. But whether in an open or closed situation, evaporation occurs only from the surface of the liquid.
    [Show full text]
  • Kirtan Leelaarth Amrutdhaara
    KIRTAN LEELAARTH AMRUTDHAARA INSPIRERS Param Pujya Dharma Dhurandhar 1008 Acharya Shree Koshalendraprasadji Maharaj Ahmedabad Diocese Aksharnivasi Param Pujya Mahant Sadguru Purani Swami Hariswaroopdasji Shree Swaminarayan Mandir Bhuj (Kutch) Param Pujya Mahant Sadguru Purani Swami Dharmanandandasji Shree Swaminarayan Mandir Bhuj (Kutch) PUBLISHER Shree Kutch Satsang Swaminarayan Temple (Kenton-Harrow) (Affiliated to Shree Swaminarayan Mandir Bhuj – Kutch) PUBLISHED 4th May 2008 (Chaitra Vad 14, Samvat 2064) Produced by: Shree Kutch Satsang Swaminarayan Temple - Kenton Harrow All rights reserved. No part of this book may be used or reproduced in any form or by any means without written permission from the publisher. © Copyright 2008 Artwork designed by: SKSS Temple I.T. Centre © Copyright 2008 Shree Kutch Satsang Swaminarayan Temple - Kenton, Harrow Shree Kutch Satsang Swaminarayan Temple Westfield Lane, Kenton, Harrow Middlesex, HA3 9EA, UK Tel: 020 8909 9899 Fax: 020 8909 9897 www.sksst.org [email protected] Registered Charity Number: 271034 i ii Forword Jay Shree Swaminarayan, The Swaminarayan Sampraday (faith) is supported by its four pillars; Mandir (Temple), Shastra (Holy Books), Acharya (Guru) and Santos (Holy Saints & Devotees). The growth, strength and inter- supportiveness of these four pillars are key to spreading of the Swaminarayan Faith. Lord Shree Swaminarayan has acknowledged these pillars and laid down the key responsibilities for each of the pillars. He instructed his Nand-Santos to write Shastras which helped the devotees to perform devotion (Bhakti), acquire true knowledge (Gnan), practice righteous living (Dharma) and develop non- attachment to every thing material except Supreme God, Lord Shree Swaminarayan (Vairagya). There are nine types of bhakti, of which, Lord Shree Swaminarayan has singled out Kirtan Bhakti as one of the most important and fundamental in our devotion to God.
    [Show full text]
  • Unclaimed Dividend Details of 2019-20 Interim
    LAURUS LABS LIMITED Dividend UNPAID REGISTER FOR THE YEAR INT. DIV. 2019-20 as on September 30, 2020 Sno Dpid Folio/Clid Name Warrant No Total_Shares Net Amount Address-1 Address-2 Address-3 Address-4 Pincode 1 120339 0000075396 RAKESH MEHTA 400003 1021 1531.50 104, HORIZON VIEW, RAHEJA COMPLEX, J P ROAD, OFF. VERSOVA, ANDHERI (W) MUMBAI MAHARASHTRA 400061 2 120289 0000807754 SUMEDHA MILIND SAMANGADKAR 400005 1000 1500.00 4647/240/15 DR GOLWALKAR HOSPITAL PANDHARPUR MAHARASHTRA 413304 3 LLA0000191 MR. RAJENDRA KUMAR SP 400008 2000 3000.00 H.NO.42, SRI VENKATESWARA COLONY, LOTHKUNTA, SECUNDERABAD 500010 500010 4 IN302863 10001219 PADMAJA VATTIKUTI 400009 1012 1518.00 13-1-84/1/505 SWASTIK TOWERS NEAR DON BASCO SCHOOL MOTHI NAGAR HYDERABAD 500018 5 IN302863 10141715 N. SURYANARAYANA 400010 2064 3096.00 C-102 LAND MARK RESIDENCY MADINAGUDA CHANDANAGAR HYDERABAD 500050 6 IN300513 17910263 RAMAMOHAN REDDY BHIMIREDDY 400011 1100 1650.00 PLOT NO 11 1ST VENTURE PRASANTHNAGAR NR JP COLONY MIYAPUR NEAR PRASHANTH NAGAR WATER TANK HYDERABAD ANDHRA PRADESH 500050 7 120223 0000133607 SHAIK RIYAZ BEGUM 400014 1619 2428.50 D NO 614-26 RAYAL CAMPOUND KURNOOL DIST NANDYAL Andhra Pradesh 518502 8 120330 0000025074 RANJIT JAWAHARLAL LUNKAD 400020 35 52.50 B-1,MIDDLE CLASS SOCIETY DAFNALA SHAHIBAUG AHMEDABAD GUJARAT 38004 9 IN300214 11886199 DHEERAJ KOHLI 400021 80 120.00 C 4 E POCKET 8 FLAT NO 36 JANAK PURI DELHI 110058 10 IN300079 10267776 VIJAY KHURANA 400022 500 750.00 B 459 FIRST FLOOR NEW FREINDS COLONY NEW DELHI 110065 11 IN300206 10172692 NARESH KUMAR GUPTA 400023 35 52.50 B-001 MAURYA APARTMENTS 95 I P EXTENSION PATPARGANJ DELHI 110092 12 IN300513 14326302 DANISH BHATNAGAR 400024 100 150.00 67 PRASHANT APPTS PLOT NO 41 I P EXTN PATPARGANJ DELHI 110092 13 IN300888 13517634 KAMNI SAXENA 400025 20 30.00 POCKET I 87C DILSHAD GARDEN DELHI .
    [Show full text]
  • Effect of Different Extraction Methods on Yield and Quality of Essential Oil from Four Rosa Species
    Floriculture and Ornamental Biotechnology ©2007 Global Science Books Effect of Different Extraction Methods on Yield and Quality of Essential Oil from Four Rosa Species Adnan Younis1* • Muhammad Aslam Khan1 • Asif Ali Khan2 • Atif Riaz1 • M. Aslam Pervez1 1 Institute of Horticultural Sciences, University of Agriculture, Faisalabad, Pakistan 2 Department of Plant Breeding and Genetics, University of Agriculture, Faisalabad, Pakistan Corresponding author : * [email protected] ABSTRACT In the present study rose oil was extracted from the petals of four Rosa species i.e. R. damascena, R. centifolia, R. borboniana and Rosa 'Gruss an Teplitz' through solvent extraction through hexane, solvent extraction through ether and steam distillation. R. damascena yielded (0.145%) of absolute oil, R. centifolia yielded 0.11% whereas R. 'Gruss an Teplitz' yielded the least (0.035%) absolute oil. Solvent extraction through hexane yielded more absolute oil (0.11%) than steam distillation (0.075%) and solvent extraction (0.07%) through ether on petal weight basis. Gas-chromatography of the rose oil was carried out for the qualitative and quantitative analysis of the oil constituents. Major compounds identified were citronellol, methyl eugenol, geraniol, geranyl acetate, phenyl ethyl alcohol, linalool, benzaldehyde, benzyl alcohol, rhodinyl acetate, citronellyl acetate, benzyl acetate and phenyl ethyl formate. Both techniques (solvent extraction and steam distillation) yielded oil with differences in the percentage composition of each component, but solvent extraction through hexane proved better (i.e. higher yield and more components) than steam distillation for extraction of essential oil from roses. _____________________________________________________________________________________________________________ Keywords: citronellol, essential oil composition, Rosa centifolia, solvent extraction, steam distillation INTRODUCTION essential oil, which is slowly liberated from the plant material (Durst and Gokel 1987; Wilson 1995).
    [Show full text]
  • Method 23 Determination of Polychlorinated Dibenzo-P-Dioxins
    Method 23 8/3/2017 While we have taken steps to ensure the accuracy of this Internet version of the document, it is not the official version. To see a complete version including any recent edits, visit: https://www.ecfr.gov/cgi-bin/ECFR?page=browse and search under Title 40, Protection of Environment. METHOD 23—DETERMINATION OF POLYCHLORINATED DIBENZO-P-DIOXINS AND POLYCHLORINATED DIBENZOFURANS FROM STATIONARY SOURCES 1. Applicability and Principle 1.1 Applicability. This method is applicable to the determination of polychlorinated dibenzo-p- dioxins (PCDD's) and polychlorinated dibenzofurans (PCDF's) from stationary sources. 1.2 Principle. A sample is withdrawn from the gas stream isokinetically and collected in the sample probe, on a glass fiber filter, and on a packed column of adsorbent material. The sample cannot be separated into a particle vapor fraction. The PCDD's and PCDF's are extracted from the sample, separated by high resolution gas chromatography, and measured by high resolution mass spectrometry. 2. Apparatus 2.1 Sampling. A schematic of the sampling train used in this method is shown in Figure 23-1. Sealing greases may not be used in assembling the train. The train is identical to that described in section 2.1 of Method 5 of this appendix with the following additions: Method 23 8/3/2017 2.1.1 Nozzle. The nozzle shall be made of nickel, nickel-plated stainless steel, quartz, or borosilicate glass. 2.1.2 Sample Transfer Lines. The sample transfer lines, if needed, shall be heat traced, heavy 1 1 walled TFE ( ⁄2 in.
    [Show full text]
  • The Destructive Distillation of Pine Sawdust
    Scholars' Mine Bachelors Theses Student Theses and Dissertations 1903 The destructive distillation of pine sawdust Frederick Hauenstein Herbert Arno Roesler Follow this and additional works at: https://scholarsmine.mst.edu/bachelors_theses Part of the Mining Engineering Commons Department: Mining Engineering Recommended Citation Hauenstein, Frederick and Roesler, Herbert Arno, "The destructive distillation of pine sawdust" (1903). Bachelors Theses. 238. https://scholarsmine.mst.edu/bachelors_theses/238 This Thesis - Open Access is brought to you for free and open access by Scholars' Mine. It has been accepted for inclusion in Bachelors Theses by an authorized administrator of Scholars' Mine. This work is protected by U. S. Copyright Law. Unauthorized use including reproduction for redistribution requires the permission of the copyright holder. For more information, please contact [email protected]. FOR THE - ttl ~d IN SUBJECT, ••The Destructive Distillation of P ine Sawdust:• F . HAUENSTEIN AND H . A. ROESLER. CLASS OF 1903. DISTILLATION In pine of the South, the operation of m.ills to immense quanti waste , such and sawdust.. The sawdust especially, is no practical in vast am,ounte; very difficult to the camp .. s :ls to util the be of commercial .. folloWing extraction turpentine .. of the acid th soda and treat- products .. t .. the t.he turpentine to in cells between , or by tissues to alcohol, a soap which a commercial t this would us too the rd:- hydrochloric was through supposition being that it d form & pinene hydro- which produced~ But instead the hydrochl , a dark unl<:nown compound was The fourth experiment, however, brought out a number of possibilities, a few of Which have been worked up.
    [Show full text]
  • Hardwood-Distillation Industry
    HARDWOOD-DISTILLATION INDUSTRY No. 738 Revised February 1956 41. /0111111 110 111111111111111111 t I 1, UNITED STATES DEPARTMENT OF AGRICULTURE FOREST PRODUCTS LABORATORY FOREST SERVICE MADISON 5, WISCONSIN. In Cooperation with the University of Wisconsin 1 HARDWOOD-DISTILLATION INDUSTRY— By EDWARD BEGLINGER, Chemical Engineer 2 Forest Products Laboratory, — Forest Service U. S. Department of Agriculture The major portion of wood distillation products in the United States is obtained from forest and mill residues, chiefly beech, birch, maple, oak, and ash. Marketing of the natural byproducts recovered has been concerned traditionally with outlets for acetic acid, methanol, and charcoal. Large and lower cost production of acetic acid and methanol from other sources has severely curtailed markets formerly available to the distillation in- dustry, and has in turn created operational conditions generally unfavor- able to many of the smaller and more marginal plants. Increased demand for charcoal, which is recovered in the largest amount as a plant product, now provides a compensating factor for more favorable plant operation. The present hardwood-distillation industry includes six byproduct-recovery plants. With the exception of one smaller plant manufacturing primarily a specialty product, all have modern facilities for direct byproduct re- covery. Changing economic conditions during the past 25 years, including such factors as progressively increasing raw material, equipment, and labor costs, and lack of adequate markets for methanol and acetic acid, have caused the number of plants to be reduced from about 50 in the mid- thirties to the 6 now operating. In addition to this group, a few oven plants formerly practicing full recovery have retained the carbonizing equipment and produce only charcoal.
    [Show full text]
  • Hydro-Distillation and Steam Distillation from Aromatic Plants
    Hydro-distillation and steam distillation from aromatic plants Sudeep Tandon Scientist Chemical Engineering Division CIMAP, Lucknow HISTORY Written records of herbal distillation are found as early as the first century A.D., and around 1000 A.D., the noted Arab physician and naturalist Ibn Sina also known as Avicenna described the distillation of rose oil from rose petals The ancient Arabian people began to study the chemical properties of essential oils & developed and refined the distillation process Europeans began producing essential oils in the 12th century 1 DISTILLATION ? A process in which a liquid or vapour mixture of two or more substances is separated into its component fractions of desired purity, by the application and removal of heat. In simple terms distillation of aromatic herbs implies vaporizing or liberating the oils from the trichomes / plant cell membranes of the herb in presence of high temperature and moisture and then cooling the vapour mixture to separate out the oil from water. It is the most popular widely used and cost effective method in use today for producing majority of the essential oils throughout the world Distillation is an art and not just a “Chemical" process that is reliant upon many factors for successful quality oil production. BASIC SCIENTIFIC PRINCIPLES INVOLVED IN THE PROCESS To convert any liquid into a vapour we have to apply energy in form of heat called as latent heat of vaporization A liquid always boils at the temperature at which its vapour pressure equals the atmospheric / surrounding pressure For two immiscible liquids the total vapour pressure of the mixture is always equal to the sum of their partial pressures The composition of the mixture will be determined by the concentration of the individual components into its partial pressure As known the boiling point of most essential oil components exceeds that of water and generally lies between 150 – 300oC 2 If a sample of an essential oil having a component ‘A’ having boiling point for example 190oC and the boiling point of the water is 100oC.
    [Show full text]