DOCSLIB.ORG

A Paper on Manufacturing of Ethylene Glycol

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A Paper on Manufacturing of Ethylene Glycol A Paper On Manufacturing Of Ethylene Glycol Ethylene Glycol is nowadays one of the most industrially important chemical. Due to its demand and a vast application area lot of research is going on for improving its production statistics. In 1995 the world capacity for ethylene glycol was about 9.7 x 106 tonnes per year. Properties of Ethylene Glycol Ethylene Glycol is specifically colorless, syrupy hygroscopic liquid with a sweet taste. Mol. Wt 62. 07 Sp. Gravity 1.116 at 200C M.P. - 15.60C B.P. 197.60C EG is soluble in water, alcohol and ether. Lowers the freezing point of water. Uses of Ethylene Glycol 1) Antifreeze / Coolant As already noted a major use for the EG is as antifreeze for internal combustion engines, particular in the USA. There is also an increasing tendency to use glycol - water solutions as year round coolants for automobiles and as industrial heat transfer agent. Ethylene glycol based formulations are used for defrosting and de - icing aircraft and to de - ice airport runways and taxiways. Pressurized fire extinguishers and sprinkler system often contain ethylene glycol to prevent freezing. Ethylene glycol is added to asphalt emulsion paints to provide protection against freezing, which would break the emulsion. Ethylene glycol, after nitration to form dinitrate, an explosive, is mixed with dynamite to depress its freezing point and make it safer to handle in cold weather. 2) Polyester fibers and resins : Ethylene glycol is the raw material in the manufacture of the polyester fibers ( Polyethylene terephthalate ), commonly marketed commercially as Dacron, fortrel, Kodel , terylene, Vycron etc. As noted previously , this use has become the most important market for glycol worldwide. Polyester resins which are made from ethylene glycol, vinyl tape monomers, and maleic and phthalic anhydrides have important applications in the production of laminates. These are extensively used in the manufacture of a wide range of consumer products such as furniture, automobile bodies, boat hulls, suitcases etc. Alkyd resins made from ethylene glycol and phthalic anhydride are used in the manufacture of the surface coatings. The reaction of ethylene glycol with dibasic acids ( O - ophthalmic, malefic or fumaric ) produces alkyd type resins used in adhesions, in modifying synthetic rubbers and in the other applications. Glycol based resin esters are used as politicizes in adhesives, lacquers and enamels. 3) Hydraulic fluids : Hydraulic brake and shock absorber fluids contain ethylene glycol to improve inhibitor solubility, prevent rubber swelling, and inhibit foam formulation. Ethylene glycol is mixed with polyalkylene glycols and water to produce hydro lubes , which have extensive application as nonflammable, low viscosity hydraulic fluids. 4) Capacitors : Ethylene glycol is a solvent and suspending medium for ammonium perborate , which is used in most electrolytic capacitors. 5) Other Uses : Ethylene glycol is an intermediate in the manufacture of glyoxal, which is used to treat cotton polyester fabrics to make the permanent press. It is added to water dispersions of urea formaldehyde and melamine - formaldehyde to stabilize them. It is also used as a humectants for paper, textile fibers, leather, and adhesives, and in addition makes these products softer and more pliable and improves their durability. Processes of Manufacturing of Ethylene Glycol : Ethylene Glycol has become the most important ethylene derived industrial chemical of the world. No. of processes have been studied but commercially, the hydration of the ethylene oxide is being used worldwide. Ethylene Oxide hydration route also produces small amount of the di, tri and higher glycols as co products, and these have established their own uses and markets. First we will consider the Ethylene oxide hydration process then we will shift to other process alternatives. * Ethylene Glycol from Hydration of the Ethylene Oxide : Material required : Consider that the ethylene oxide required is also produced In the same plant. For one ton ethylene Glycol Ethylene 1800 lb Air 19000 lb Silver 0.01 oz Process Flow sheet : Process chemistry The chemistry of the hydration reaction is quite simple. It consists of the reaction of the ethylene oxide with water to form Monoethylene Glycol ( MEG ). H2C ¾O ¾ CH2 + H2O ¾® H2C ¾ CH2 + 91.0 kJ ½ ½ OH OH The above reaction is followed by the reaction of the MEG with the remaining Ethylene Oxide to form higher derivatives of the glycol. The most Important variable affecting the glycol distribution is the water to oxide ratio. In commercial plants, the production of di and tri ethylene glycol can be effectively reduced by using a large amount of excess water. As an example, at water to oxide ratios in excess of 20 : 1 , the heavier glycols will comprise less then 10 weight percent of the total glycol produced. In the design of a commercial glycol plant, the improvement in MEG yields that can be achieved by increasing water recycle are balanced against the increase in capital and utility costs for optimal economics. The glycol distribution from the reactor is essentially unaffected by changes in pressure and temperature over the ranges that are normally of commercially interest ( 1 to 30 bars, 90 to 2000C. ). Under neutral or acidic conditions, the product distribution is essentially unchanged. However, Basic catalysts ( or a high pH ) will substantially increase the production of higher glycols. The rate of the hydration reaction is however strongly dependent on the temperature and is catalyzed by acids, bases are only about 1 percent as effective as acids. While the use of acid catalysts permit’s the hydration reaction to proceed at lower temperatures and pressures than those required for unanalyzed conditions, the reaction solution becomes corrosive and requires acid removal. Process Description : In a free standing glycol plant, the feeds are refined ethylene oxide and pure water. These are mixed with the cold recycle water in a feed tank to produce a dilute oxide - water solution containing 8 to 12 percent ethylene oxide. The solution is pumped through preheaters ( hot recycle water and steam ) into an adiabatic reactor where the ethylene oxide is hydrated ( non catalytically ) to produce a MEG and a small amount of higher derivatives. The glycol reactor is designed to provide sufficient residence time to react ( non catalytically ) essentially all the ethylene oxide. The reactor pressure is controlled at a level that avoids vaporization of ethylene oxide from the aqueous solution and will depend on the initial concentration of the oxide and the reaction temperature. Published information shows that commercial reactors operating at temperatures of 190 to 2000C will be at a pressure around 14 to 22 bars. The glycol water mixture from the reactor is fed to the first effect of a multiple effect evaporator. The first effect is operated at a medium pressure level and is reboiled using high pressure steam. The following effects of the evaporator operate at progressively lower pressures, with the final stage at low pressure or even under vacuum. The evaporated water is recovered as an overhead condensate is recycled back to the glycol reaction fed tank after heat exchange with cold reactor feed. If the feed to the plant is a crude oxide water solution from an EO plant, the recycled water is sent back to the ethylene oxide recovery section. The concentrated crude glycol solution leaving the final evaporation effect is stripped of its remaining water and light impurities in the light ends column. The water free glycol mixture is then distilled in a series of vacuum towers to produce fiber grade MEG and high purity higher derivatives. The final column produces a small bottoms stream that contains heavier glycol and is usually used for fuel, but does have potential commercial value. The main problem where lot of research is going on is the selectivity of the ethylene oxide. The selectivity is low which is around 90%. The rest being the polyethylene glycol. This is a very low selectivity for a product made in such large quantities. New synthetic paths for the glycol will make this intermediate much less important. * From Ethylene Through Ethylene Chlorohydrin : The reaction between ethylene and hypochlorous acid yields ethylene chlorohydrin, which may be converted either directly to ethylene glycol by hydrolysis or to ethylene oxide by reaction with alkali and then to the glycol by hydrolysis. C2H4 + HOCl ® CH2OHCH2Cl CH2OHCH2Cl + NaHCO3 + H2O ® CH2OHCH2OH + CO2 + H2O + NaCl Material & Utility requirement : For one ton Ethylene Glycol Ethylene 1 ton. Sodium Hydroxide 80 lb Chlorine 2.35 tons Steam 24000 lb Milk Of Lime 2.2 tons Electricity 160 kwhr. Water 80000 gal. Process description : To produce ethylene chlorohydrin by a continuous process, ethylene is passed under a pressure of 200 atm at 200C in to a tower. A solution of hydrated lime is then charged in to the tower, so that under the stated temperature and pressure about 28 g of ethylene per lit. of alkali results. The solution is pumped under pressure in to the mixer, where it meets a stream of chlorine at the rate of 1 mole chlorine per lit. of alkali solution. The chlorine reacted with hydrated lime to form calcium ox chloride , which is immediately decomposed to form hypochlorous acid and calcium chloride. The HOCl reacts with the ethylene in the solution to give ethylene chlorohydrin. The reaction takes place at essentially room temperature and at about 200 atm. Pressure. The solution is treated with the sodium bicarbonate solution at 70 to 800C in a closed steam jacket kettle fitted with an efficient agitator. After 4 to 6 hrs. evolution of the carbon dioxide ends, and the crude glycol solution is passed in to a vacuum still. Here under reduced , the solution is concentrated and separated from the salt by distillation. * Direct Reaction : This procedure is at first glance the most straightforward, but really is not since practically every bond in the product molecule has to be formed.
Load more

Recommended publications
  • Activity 33. Hydrohalogenation & Hydration of Alkynes
    Chem 201, Fall 2010 Activity 33, M Nov 22 Activity 33. Hydrohalogenation & Hydration of Alkynes Alkynes undergo many of the same addition reactions that alkenes do, including additions that require carbocation intermediates. Different energy and geometry changes may be required for additions to an alkyne and an alkene so some surprising outcomes may occur with alkynes. Model 1. Addition of HX Hydrogen halides (HCl, HBr, HI) add to alkynes to make vinyl halides . A carbocation mechanism is followed when the reaction is performed in the dark in a peroxide-free solvent. This addition obeys Markovnikov’s rule. A free-radical-chain mechanism is followed when HBr addition is initiated by organic peroxides. This addition gives an anti-Markonikov product. Critical Thinking Questions 1. Draw the carbocations indicated by the two bouncy curved arrows (below). Based on the observation that the carbocation mechanism yields a Markovnikov product, circle the more stable carbocation. 2. (CI) Draw the free radicals indicated by the two competing pathways (below). Based on the observation that the free-radical mechanism yields an anti-Markovnikov product, circle the more stable free radical. 3. The cations and radicals in CTQ #1 and #2 are called vinyl cations and vinyl radicals , respectively. Based on the regioselectivities reported in Model 1, what effect do alkyl substituents at the charged/radical carbon have on the energies of these species? Is this consistent with, or opposed to, their effect on R 3C+ and R 3C• species? 4. The geometry of a vinyl cation can be anticipated using VSEPR. Count electron domains in the cation below and predict all of the HCC bond angles.
    [Show full text]
  • A Palladium-Catalyzed Approach to Allenic Aromatic Ethers and First Total
    Chemical Science EDGE ARTICLE View Article Online View Journal | View Issue A palladium-catalyzed approach to allenic aromatic ethers and first total synthesis of terricollene A† Cite this: Chem. Sci.,2021,12,9347 a b b b a a a All publication charges for this article Chaofan Huang, Fuchun Shi, Yifan Cui,‡ Can Li,‡ Jie Lin,‡ Qi Liu,‡ Anni Qin,‡ have been paid for by the Royal Society Huanan Wang,‡a Guolin Wu,‡a Penglin Wu,‡a Junzhe Xiao, ‡b Haibo Xu,‡b of Chemistry Yuan Yuan,‡a Yizhan Zhai,‡b Wei-Feng Zheng,‡a Yangguangyan Zheng, ‡a Biao Yu*b and Shengming Ma *ab A palladium-catalyzed C–O bond formation reaction between phenols and allenylic carbonates to give 2,3- allenic aromatic ethers with decent to excellent yields under mild reaction conditions has been described. A Received 7th April 2021 variety of synthetically useful functional groups are tolerated and the synthetic utility of this method has Accepted 4th June 2021 been demonstrated through a series of transformations of the allene moiety. By applying this reaction as DOI: 10.1039/d1sc01896e the key step, the total syntheses of naturally occurring allenic aromatic ethers, eucalyptene and rsc.li/chemical-science terricollene A (first synthesis; 4.5 g gram scale), have been accomplished. Creative Commons Attribution-NonCommercial 3.0 Unported Licence. Introduction Results and discussion Aromatic ethers are prevalent and prominent in a variety of In contrast to the well-established metal-catalyzed coupling natural products, pharmaceuticals, and agrochemicals.1 Tradi- reactions between aryl halides and phenols or aliphatic alcohols tional methods for the preparation of aromatic ethers include (Scheme 1b),9 metal-catalyzed coupling reactions of aryl halides the Williamson ether synthesis,2 direct nucleophilic substitu- tion reactions,3 Mitsunobu reaction,4 Ullman-type couplings of alkoxides with aryl halides,5 etc.
    [Show full text]
  • Kinetics and Products Distribution of Selective Catalytic Hydration of Ethylene­ and Propylene Oxides in Concentrated Aqueous Solutions
    Organic Process Research & Development 2002, 6, 660-664 Kinetics and Products Distribution of Selective Catalytic Hydration of Ethylene­ and Propylene Oxides in Concentrated Aqueous Solutions I. A. Kozlovsky, R. A. Kozlovsky,* A. V. Koustov, M. G. Makarov, J. P. Suchkov, and V. F. Shvets D.I.Mendeleev University of Chemical Technology of Russia, Chair of Basic Organic and Petrochemical Synthesis, 9 Miusskaya Square, Moscow 125047, Russia Abstract: and metalate anions.I" The kinetics and reaction mechanism The kinetics of selective hydration of ethylene- and propylene of the hydration of a-oxides using homogeneous catalysis oxides in concentrated aqueous solutions is studied during by salts have been explicitly studied.3,IO,1l The kinetic data homogeneous catalysis by sodium bicarbonate. The mathemati­ obtained have shown that at a concentration of some salts cal model of the process with determined parameters adequately of about 0.5 molJL the distribution factor b = klko is reduced describing the rate of the reaction and products distribution is lO-fold more (to 0.1-0.2). This enables the production of developed. monoglycol with high selectivity at water/oxide molar ratios close to 1. We have used hereinafter homogeneous nucleo­ philic catalysts with the above-mentioned properties for the Introduction creation of industrial heterogeneous catalysts of a selective The reaction of ethylene- and propylene oxides hydration hydration of ethylene- and propylene oxides by means of is an industrial way of obtaining of glycols, in particular an immobilization of anions of salts on heterogeneous ethylene glycol-one of the most-produced large-scale carriers. 12-17 The largest ethylene glycol producers Shell, 18-24 products of industrial organic synthesis, with the world (4) Masuda, T.
    [Show full text]
  • Vapor Phase Hydration of Ethylene Catalyzed by Solid Acids*
    47 Vapor Phase Hydration of Ethylene Catalyzed by Solid Acids* by Kozo Tanabe** and Masahiro Nitta** Summary: The hydration of ethyleneover various solid acids such as metal sulfates, phos- phates, oxides, solid phosphoricacid and cation exchangedzeolites was investigatedin a closed circulation system at 160～300℃. Ferric and aluminum sulfates and zeolites Y showed high catalytic activity in comparison with solid phosphoricacid, SiO2-Al2O3,zeolites A and all other catalysts. The selectivityfor ethanolformation was extremelyhigh in metal sulfates and zeolites A, but low in SiO2-Al2O3 and zeolites Y. The order of activities of metal sulfates was Fe2(SO4)3>Al2(SO4)3>Ni- SO4> Cr2(SO4)3>CuSO4>MnSO4>CaSO4. The catalysts those acid strength in their dried state was as strong as -8.2<Ho≦-3 were found to be active and selective for ethanol for- mation. The activitiesof cation exchangedzeolites A which varied in order of Mg-A>Cd-A> Zn-A>Ca-A>Ag-A>Sr-A>La-A～Ce-A were shown to correlate with the electronegativities of exchangedcations and the adsorptionheats of ethylene. The rate of ethanolformation increasedas the mole ratio of H2O/C2H4 decreased. The experimenton the reaction of ethylenewith heavy water showed that deuterium did not transfer into ethyleneat all. It was concludedby analyzing the kinetic data that theformation of an ad- sorbedethyl carbonium ion from an adsorbedethylene and a proton on acid sites was the rate-deter- miningstep of the hydration. 1 Introduction 2 Experimental The direct synthesis of alcohol from ethylene 2.1 Catalysts
    [Show full text]
  • Reactions of Alkenes and Alkynes
    05 Reactions of Alkenes and Alkynes Polyethylene is the most widely used plastic, making up items such as packing foam, plastic bottles, and plastic utensils (top: © Jon Larson/iStockphoto; middle: GNL Media/Digital Vision/Getty Images, Inc.; bottom: © Lakhesis/iStockphoto). Inset: A model of ethylene. KEY QUESTIONS 5.1 What Are the Characteristic Reactions of Alkenes? 5.8 How Can Alkynes Be Reduced to Alkenes and 5.2 What Is a Reaction Mechanism? Alkanes? 5.3 What Are the Mechanisms of Electrophilic Additions HOW TO to Alkenes? 5.1 How to Draw Mechanisms 5.4 What Are Carbocation Rearrangements? 5.5 What Is Hydroboration–Oxidation of an Alkene? CHEMICAL CONNECTIONS 5.6 How Can an Alkene Be Reduced to an Alkane? 5A Catalytic Cracking and the Importance of Alkenes 5.7 How Can an Acetylide Anion Be Used to Create a New Carbon–Carbon Bond? IN THIS CHAPTER, we begin our systematic study of organic reactions and their mecha- nisms. Reaction mechanisms are step-by-step descriptions of how reactions proceed and are one of the most important unifying concepts in organic chemistry. We use the reactions of alkenes as the vehicle to introduce this concept. 129 130 CHAPTER 5 Reactions of Alkenes and Alkynes 5.1 What Are the Characteristic Reactions of Alkenes? The most characteristic reaction of alkenes is addition to the carbon–carbon double bond in such a way that the pi bond is broken and, in its place, sigma bonds are formed to two new atoms or groups of atoms. Several examples of reactions at the carbon–carbon double bond are shown in Table 5.1, along with the descriptive name(s) associated with each.
    [Show full text]
  • Organic Chemistry Peer Tutoring Department CHEM 51B University
    Organic Chemistry Peer Tutoring Department CHEM 51B University of California, Irvine Professor Pronin Aubrey Taduran ([email protected]) http://sites.uci.edu/ochemtutors ​ ​ ​ Crystal Wong ([email protected]) Georgene Vasquez ([email protected]) Midterm 2 Review Packet Key 1. Draw the starting reagents for the first reaction and the product(s) for the second reaction. Determine the mechanism performed in each reaction. Explain how the second mechanism was determined. Alcohol dehydration can be determined from the strong acidic reagent (H2SO4). Because ​ ​ ​ ​ the produced alcohol is a 2° alcohol, we can conclude that the dehydration reaction underwent an E1 mechanism. 2. Predict the product(s) for the following reaction. Indicate the major and minor product if applicable. The alcohol molecule has two differently positioned beta hydrogens that allow the dehydration of alcohols in acid. The two differently positioned beta hydrogens result in two different products. 3. Rank the following alcohol molecules from fastest to slowest (1-fastest, 3-slowest) rate of reaction with HCl. Determine mechanism each alcohol would undergo when reacting to HCl and the common byproduct that will result from the reaction. The common byproduct created through the conversion of alcohols to alkyl halides with HX is H2O. ​ ​ ​ ​ 4. Provide the product and mechanism of the following reaction. 5. Provide the product and mechanism of the following reaction. 6. Complete the table below for converting alcohols to alkyl halides. HX HX PBr SOCl ​3 ​2 Alcohol (CH3OH, 1°, 2°, 3°) CH3OH, 1° 2°, 3° CH3OH, 1°, 2° CH3OH, 1°, 2° ​ ​ ​ ​ ​ ​ ​ ​ Mechanism (SN1, SN2) SN2 SN1 SN2 SN2 ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ 7. Determine the starting reagents for the following reaction.
    [Show full text]
  • On the Michael Addition of Water to ,Unsaturated Ketones Using Amino
    SHORT COMMUNICATION DOI: 10.1002/ejoc.201301230 On the Michael Addition of Water to α,β-Unsaturated Ketones Using Amino Acids Verena Resch,*[a] Christiane Seidler,[a] Bi-Shuang Chen,[a] Ian Degeling,[a] and Ulf Hanefeld[a] Keywords: Organocatalysis / Amino acids / Water chemistry / Green chemistry / Michael addition The use of water as a nucleophile for Michael additions is as the best candidate. To obtain a better insight and to deter- still a challenge in organic chemistry. In this report we de- mine the minimum requirements of the catalyst, several scribe the use of amino acids as catalysts for the Michael ad- structurally related compounds were tested. The reaction dition of water to α,β-unsaturated ketones. All 20 proteino- was characterized in terms of conditions and equilibrium. genic amino acids were screened and L-lysine was identified Introduction However, most of the methods furnishing racemic products suffer from complex, cumbersome or expensive preparation The Michael addition of water to α,β-unsaturated of the catalysts. ketones still seems to be a difficult task to achieve by using In the last few years, amino acids have played an impor- chemical methods. Although in nature this reaction is ubiq- tant role in organocatalysis. In particular, proline and its uitous due to its presence in many metabolic cycles, only derivatives have been established as versatile catalysts for a a few methods using non-enzymatic approaches have been variety of different reactions including Michael additions reported. Apart from enzymatic methods using hy- (for selected examples see ref.[9] and for reviews see ref.[10] dratases,[1] for example, fumarase, malease, citraconase and and references cited therein).
    [Show full text]
  • Nucleophilic Addition to the Carbonyl Group 6
    Nucleophilic addition to the carbonyl group 6 Connections Building on Arriving at Looking forward to • Functional groups, especially the C=O • How and why the C=O group reacts • Additions of organometallic group ch2 with nucleophiles reagents ch9 • Identifying the functional groups in a • Explaining the reactivity of the C=O • Substitution reactions of the C=O molecule spectroscopically ch3 group using molecular orbitals and curly group’s oxygen atom ch11 • How molecular orbitals explain arrows • How the C=O group in derivatives of molecular shapes and functional • What sorts of molecules can be made by carboxylic acids promotes substitution groups ch4 reactions of C=O groups reactions ch10 • How, and why, molecules react together • How acid or base catalysts improve the • C=O groups with an adjacent double and using curly arrows to describe reactivity of the C=O group bond ch22 reactions ch5 Molecular orbitals explain the reactivity of the carbonyl group We are now going to leave to one side most of the reactions you met in the last chapter—we will come back to them all again later in the book. In this chapter we are going to concentrate on just one of them—probably the simplest of all organic reactions—the addition of a nucleo- phile to a carbonyl group. The carbonyl group, as found in aldehydes, ketones, and many other compounds, is without doubt the most important functional group in organic chemis- try, and that is another reason why we have chosen it as our fi rst topic for more detailed study. You met nucleophilic addition to a carbonyl group on pp.
    [Show full text]
  • Chapter16.Pdf
    (9-11/94)(2,3/97)(12/05)(1-6/06) Neuman Chapter 16 Chapter 16 Addition and Substitution Reactions of Carbonyl Compounds from Organic Chemistry by Robert C. Neuman, Jr. Professor of Chemistry, emeritus University of California, Riverside [email protected] <http://web.chem.ucsb.edu/~neuman/orgchembyneuman/> Chapter Outline of the Book ************************************************************************************** I. Foundations 1. Organic Molecules and Chemical Bonding 2. Alkanes and Cycloalkanes 3. Haloalkanes, Alcohols, Ethers, and Amines 4. Stereochemistry 5. Organic Spectrometry II. Reactions, Mechanisms, Multiple Bonds 6. Organic Reactions *(Not yet Posted) 7. Reactions of Haloalkanes, Alcohols, and Amines. Nucleophilic Substitution 8. Alkenes and Alkynes 9. Formation of Alkenes and Alkynes. Elimination Reactions 10. Alkenes and Alkynes. Addition Reactions 11. Free Radical Addition and Substitution Reactions III. Conjugation, Electronic Effects, Carbonyl Groups 12. Conjugated and Aromatic Molecules 13. Carbonyl Compounds. Ketones, Aldehydes, and Carboxylic Acids 14. Substituent Effects 15. Carbonyl Compounds. Esters, Amides, and Related Molecules IV. Carbonyl and Pericyclic Reactions and Mechanisms 16. Carbonyl Compounds. Addition and Substitution Reactions 17. Oxidation and Reduction Reactions 18. Reactions of Enolate Ions and Enols 19. Cyclization and Pericyclic Reactions *(Not yet Posted) V. Bioorganic Compounds 20. Carbohydrates 21. Lipids 22. Peptides, Proteins, and α−Amino Acids 23. Nucleic Acids **************************************************************************************
    [Show full text]
  • CHEM 203 Summary of Topics to Be Covered in the Course INDEX A
    CHEM 203 Summary of Topics to be Covered in the Course INDEX A. Introduction p. 3 Lecture 1: Structural theory of organic chemistry p. 3 B. Aspects of the Electronic Theory of Organic Chemistry p. 5 Lecture 2: Electronic theory of organic chemistry p. 5 Lecture 3: Lewis acid-base interactions p. 11 C. Alkenes p. 14 Lecture 4: Bronsted acid-base equilibria, alkenes p. 14 Lecture 5: Electrophilic addition of H–X to alkenes p. 21 Lecture 6: Regioselective addition of H–X to alkenes p. 26 Lecture 7: Regioselective addition of H–X to alkenes, rearrangements p. 31 Lecture 8: Stereochemical aspects of H–X the additions to alkenes p. 35 Lecture 9: Hydration of alkenes p. 39 Lecture 10: Addition of "water-like" molecules to alkenes p. 42 Lecture 11: Halogenation of alkenes & stereochemical aspects p. 45 Lecture 12: Halogenation, halohydrins, stereochemical aspects p. 49 Lecture 13: Ozonolysis of alkenes p. 53 Lecture 14: Osmylation of alkenes p. 58 Lecture 15: Hydroboration of alkenes p. 61 Lecture 16: Hydrogenation of alkenes p. 66 Lecture 17: Radical addition to alkenes - I p. 70 Lecture 18: Radical addition to alkenes - II p. 75 D. Alkynes p. 79 Lecture 19: Chemistry of Alkynes p. 79 E. Alkyl Halides p. 83 Lecture 20: Alkyl halides - halogenation of C–H bonds p. 83 Lecture 21: SN2 reactions - I p. 88 Lecture 22: SN2 reactions - II p. 91 Lecture 23: SN2 vs. elimination reactions p. 94 Lecture 24: E2 reactions p. 98 Lecture 25: SN1 and E1 reactions p. 102 Lecture 26: SET reactions of alkyl halides: organometallics p.
    [Show full text]
  • Results and Discussions
    Gold-Catalyzed Synthesis of Heterocycles from Alkynyl Ethers. Synthesis of Leucascandrolide A. Mechanistic Analysis of Oxidative C–H Cleavages using Inter- and Intramolecular Kinetic Isotope Effects. by Hyung Hoon Jung B.S., Kyungwon University, 1998 M.S., Hanyang University, 2000 Submitted to the Graduate Faculty of The Dietrich School of Arts and Sciences in partial fulfillment of the requirements for the degree of Doctor of Philosophy University of Pittsburgh 2012 UNIVERSITY OF PITTSBURGH DIETRICH SCHOOL OF ARTS AND SCIENCES This dissertation was presented by Hyung Hoon Jung It was defended on December 09, 2011 and approved by Dr. Paul E. Floreancig, Professor, Department of Chemistry Dr. Kay M. Brummond, Professor, Department of Chemistry Dr. Toby M. Chapman, Associate Professor, Department of Chemistry Dr. Billy W. Day, Professor, Department of Pharmaceutical Sciences Dissertation Director: Dr. Paul E. Floreancig, Professor, Department of Chemistry ii Copyright© by Hyung Hoon Jung 2012 iii ABSTRACT Gold-Catalyzed Synthesis of Heterocycles from Alkynyl Ethers. Synthesis of Leucascandrolide A. Mechanistic Analysis of Oxidative C–H Cleavages using Inter- and Intramolecular Kinetic Isotope Effects. Hyung Hoon Jung, PhD University of Pittsburgh, 2012 Gold complexes catalyze the cyclyzation of homopropargylic ethers to prepare saturated hetercyclic ketones through a sequence of alkyne hydration, alkoxy elimination, and intramolecular conjugate addition of pendant oxygen or nitrogen nucleophiles. This reaction was used in an efficient total synthesis of the natural product andrachcinidine. Regioselective hydration of internal alkynes on propargylic ethers rather than homopropargylic ethers expanded the scope of products. Leucascandrolide A was synthesized through an Electron Transfer- Initiated Cyclization (ETIC) reaction as a key step.
    [Show full text]
  • Revision 1 Let There Be Water: How Hydration/Dehydration Reactions
    This is a preprint, the final version is subject to change, of the American Mineralogist (MSA) Cite as Authors (Year) Title. American Mineralogist, in press. DOI: https://doi.org/10.2138/am-2020-7380 1 Revision 1 2 3 Let there be water: how hydration/dehydration reactions accompany key Earth and life 4 processes 5 6 Alberto VITALE BROVARONE1,2*, Christopher J. BUTCH3, Alessandra CIAPPA4, Henderson J. 7 CLEAVES II5,6,7, Agnès ELMALEH2, Manuele FACCENDA8, Maureen FEINEMAN9, Jörg 8 HERMANN10, Fabrizio NESTOLA8, Angelina CORDONE11, Donato GIOVANNELLI4,5,11,12,13 1 9 Dipartimento di Scienze della Terra, Università degli Studi di Torino, 10125 Torino, Italy 2 10 Sorbonne Université, Muséum National d'Histoire Naturelle, UMR CNRS 7590, IRD, Institut de Minéralogie, de Physique des 11 Matériaux et de Cosmochimie, IMPMC, 75005 Paris, France 3 12 Department of Biomedical Engineering, Nanjing University, Nanjing, China. 4 13 Nano-Tech SpA, via d’Ancona 73/A, 60127 Osimo, Italy 5 14 Earth-Life Science Institute, Tokyo Institute of Technology, 2-12-1-IE-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan 6 15 Blue Marble Space Institute for Science, 1001 4th Ave, Suite 3201 16 Seattle, WA 98154, USA 7 17 Institute for Advanced Study, 1 Einstein Drive, Princeton, NJ 08540, U.S.A. 8 18 Dipartimento di Geoscienze, Università d Padova, 35131 Padova, Italy 9 19 Department of Geosciences, Penn State 508 Deike Building University Park, PA 16802 10 20 Institute of Geological Sciences, University of Bern, 3012 Bern, Switzerland 11 21 Department of Biology, University of Naples “Federico II”, via Cinthia, 80126, Naples, Italy 12 22 Department of Marine and Coastal Science, Rutgers University, 71 Dudley Rd, 08901 New Brunswick, NJ, USA 13 23 Institute of Marine Biological and Biotechnological Resources, National Research Council of Italy, CNR-IRBIM, l.go Fiera 24 della Pesca, 60121, Ancona, Italy 1 Always consult and cite the final, published document.
    [Show full text]