representing companies supplying civil air transport, defence & space

members' products and services directory introduction

I am delighted to welcome you to SBAC’s new directory of members’ products and services. As part of our drive to continuously improve the services we offer our members, we are producing this directory in addition to the electronic data available on our website www.sbac.co.uk. Through these pages, and on-line, you will find a trusted source of supply for all your aerospace needs.

Membership of SBAC continues to grow. This directory provides a listing of 234 member companies. This compares with 184 member companies listed in the directory published in July 2006.

The UK aerospace industry is the largest in the world, outside the USA. All the companies listed here, both great and small, have a vital role to play in this dynamic and globally successful sector. SBAC members’ interests encompass aerospace manufacturing, maintenance and through life service, professional advice, academic research, training and education. They provide aerospace products and services across all levels of the supply chain.

SBAC is the UK’s national trade association representing companies supplying civil air transport, aerospace defence, homeland security and space. Together with its regional partners, SBAC represents over 2,600 companies, assisting them in developing new business globally, facilitating innovation and competitiveness and providing regulatory services in technical standards and accreditation. SBAC’s mission is to create and sustain the conditions in the UK for member companies to compete and prosper in the global marketplace.

SBAC is at your service and invites you to contact us to discuss your needs.

Sally Howes Director General

Amendments and updates to entries in this directory should be sent to [email protected], where they will be uploaded immediately to the online version of this directory: www.sbac.co.uk

Photographs on the front cover are reproduced with the kind permission of:

Airbus SAS AgustaWestland BAE Systems Bulwell Precision Engineers Limited European Space Agency Gardner Aerospace Rolls-Royce plc .01 member business types space systems & equipment components pneumatic equipment services rockets steering systems actuators sealants vehicle management systems aftermarket support (mro) batteries seals/mounts/rings warning systems consultancy bearings seating water/waste system design brakes sensors weapon systems distribution canopies solar arrays engineering support coatings springs forming cooling stabilisers facilitiesfacilities legal connectors thrust reversers coating logistics doors tyres design outsourcing drives & transmission wheels electronic assembly project management ducting windows fabrication recruitment external lighting wings machining research & technology electrical components wiring & cables manufacture software fans mechanical assembly supplier fasteners plating surface engineering filters equipment/systems surface treatment training fuel pumps avionics test fuselage auto flight control systems tooling generators auxilliary power unit system treatment ignition braking systems lighting cabin management system motors cargo systems materialsmaterials nacelles cockpit systems alloys optical fibres conmmunication systems adhesives paints escape system alluminium pipes/ducts/hoses entertainment system coatings & treatments environment control systems titanium fire control systems composites flight training systems & equipment lubricants & solvents flight control systems rubber fuel systems speciality metals furnishings steel ground support systems wire hydraulic systems indicating/recording systems platform landing gear systems engines navigation systems fixed wing power generation systems missiles propulsion control systems rotary wing safety and rescue systems & satellite equipment uav

Reproduced with kind permission of DARA security systems Reproduced with kind permission of DARA

.02 .03 members' index A & H Management Systems Solutions Limited Accles & Pollock Limited Evans Business Centre, Durham Way South, Aycliffe Industrial Park, Newton Aycliffe, County Durham. PO Box 14, Rood End Road, Oldbury, West Midlands. B69 4NN DL5 6XP United Kingdom Tel : +44 (0)121 543 2171 Fax : +44 (0)121 543 2101 Tel : +44 (0)1325 328852 Fax : +44 (0)1325 328 821 [email protected] www.accles.co.uk [email protected] www.ah-mss.com CAA Approved, OEM Approved, Testing & Certification ISO 14001, ISO 9001, OH SAS 18001:1999 Accles & Pollock, part of the Caparo Group are experts in advanced bending, welding and forming techniques. Accles A & H Management System Solutions offers expertise in the design, development and implementation of management & Pollock utilise a huge variety of tube types and maintain close control of production quality whether the product is systems to recognised national and international standards such as ISO 9001 (Quality), ISO 14001 (Environmental) bought-in or free issue material. and OHSAS 18001 (Health and Safety) and offers services to complement this core package. A & H Management is a Business type(s): Equipment/Systems, Facilities company that specialises in supporting small to medium sized businesses. Achieving the Difference LLP A.S.A, a division of ThyssenKrupp Materials UK Limited Maple House, Bayshill Road, Cheltenham, Gloucestershire. GL50 3AW United Kingdom Kiltonga Industrial Estate, Belfast Road, Newtownards, County Down, Northern Ireland. BT23 4TJ Tel : +44 (0)1242 704 170 Fax : +44 (0)1242 704 170 United Kingdom [email protected] www.thedifference.co.uk Tel : +44 (0)2891 844 118 Fax : +44 (0)2891 844 198 www.thyssen.co.uk Achieving the Difference LLP helps organisations achieve the difference with market focus applied to strategy, customers, brands and products. ASA is a division of ThyssenKrupp Materials UK Ltd and is a leading specialist in stockholding, processing and Business type(s): Services supplying metal to the aerospace, defence and other high technology industries worldwide. ASA offers its customers exceptional supply chain management services, providing integrated supply solutions and closer to form value added products whether that is cut, profiled, machined or supplied from our extensive stock range, JIT or DLF. AD Aerospace Limited Business type(s): Materials, Services Abbots Park, Preston Brook, Cheshire. WA7 3GH United Kingdom Tel : +44 (0)870 442 4520 Fax : +44 (0)870 442 4524 A.T. Kearney Limited [email protected] www.ad-aero.com Lansdowne House, Berkeley Square, . W1J 6ER United Kingdom Customer Approved, EASA Approved

Tel : +44 (0)20 7468 8026 Fax : +44 (0)20 7468 8001 AD Aerospace is a British company, based in Manchester, UK and Atlanta, USA, which designs and manufactures the [email protected] www.atkearney.com FlightVu range of aerospace video products, including state-of-the-art video security, safety and entertainment systems. In addition to general security applications such as threat detection, physical security and access control, A.T. Kearney Limited was founded in 1926 and has 57 offices in 30 countries with 3,000 consultants worldwide. A.T. these video camera and server systems can be used for monitoring activity in the cockpit, passenger cabin, Kearney’s Aerospace & Defence practice provides a full range of management consulting services to the world’s external control services and for cargo hold surveillance. AD Aerospace is the parent company of Innovative Sensor leading airline, aerospace and defence firms. A.T. Kearney's insight into the issues facing the sector has enabled them Developments (ISD), designers of video systems for Rugged and Mobile Military Applications and both are part of the to develop, offer and implement operational and market-driven solutions. AD Group. AD Aerospace has EASA approvals for Manufacturing: UK.21G.2205 and Maintenance: UK.145.00613, and is an Business type(s): Services approved supplier to The Company. The company has facilities in Manchester, England, Atlanta, Georgia, USA and in Singapore. Accenture UK Limited Business type(s): Equipment/Systems 20 Old Bailey, London. EC4M 7AN United Kingdom Tel : +44 (0)20 7844 4000 Fax : +44 (0)20 7844 4444 Advanced Metals International [email protected] www.accenture.com Unit 0, Stratton Business Park, London Road, Biggleswade, Bedfordshire. SG18 8QB United Kingdom

Accenture is a global management consulting, technology services and outsourcing company. Committed to Tel : +44 (0)1923 205599 Fax : +44 (0)1923 205588 delivering innovation, Accenture collaborates with its clients to help them become high-performance businesses and [email protected] www.advancedmetals.co.uk governments. With deep industry and business process expertise, broad global resources and a proven track record, ISO 9001 Accenture can mobilise the right people, skills and technologies to help clients improve their performance. With approximately 146,000 people in 49 countries, the company generated net revenues of US$16.65 billion for the fiscal Advanced Metals International (AMI) was formed in 1989 and is a leading stockholder and supplier of metals and year ended Aug 31, 2006. plastics into aerospace, defence, oil and gas, and other high technology industries around the world. AMI's expertise lies Business type(s): Services in making the highest quality materials available in a fast, cost effective and convenient package. AMI offers a complete supply solution for all of their customers from small, niche, engineers right through to the biggest multi-national enterprises. Business type(s): Materials

.04 .05 members' index AEI Systems Limited Agent Oriented Software Limited 1 Kings Ride Park, Ascot, Berkshire. SL5 8AR United Kingdom Wellington House, East Road, , Cambridgeshire. CB1 1BH United Kingdom Tel : +44 (0)1344 636200 Fax : +44 (0)1344 636205 Tel : +44 (0)1223 308 000 Fax : +44 (0)70 9229 8753 [email protected] www.airquip.co.uk www.agent-software.co.uk

NATO/MoD Approved, Testing & Certification Agent Oriented Software Limited (AOS UK) was established in Cambridge (UK) in 2000. AOS UK has a collaborative relationship with Cambridge University's Institute of Manufacturing, and this collaboration aims to provide advanced AEI Systems Ltd (AEIS) is a high quality defence orientated ‘Original Equipment Manufacturer’ (OEM), specialising in agent-based manufacturing and logistics systems to UK and European industry. Agent Oriented Software Limited is an small to medium calibre weapon systems and supply of military aircraft structures and components. AEIS applies SME specialising in autonomous software systems, based upon intelligent agent technology. AOS is a stakeholder in the aerospace quality standards across its entire air, land and sea product range as part of the company's culture. AEIS Defence Technology Centre for Systems Engineering for Autonomous Systems (SEAS), where it is working with Rolls- is a manufacturer and supplier of military aircraft spares, weapon systems (including design, development, test, Royce plc on distributed power systems management. evaluation, maintenance and refurbishment), ring/pintle/pedestal mountings, cupolas, hatches and doors. Business type(s): Services Business type(s): Equipment/Systems, Services Air & Ground Aviation Limited AEROid Limited Aviation House, London Road, Shirleywich, Staffordshire. ST18 0PN United Kingdom Woodland View House, Leeds Road, Huddersfield, West Yorkshire. HD2 1YY United Kingdom Tel : +44 (0)1889 271 777 Fax : +44 (0)1889 270 756 Tel : +44 (0)1274 40 4044 Fax : +44 (0)800 073 555 [email protected] www.airandground.com [email protected] www.aeroid.co.uk IIP Accredited, ISO 9001 ISO 9001:2003 Air & Ground Aviation Limited is a supplier and distributor of aircraft parts and aviation related support equipment, AEROid Limited provides integrated RFID (Radio Frequency Identification) solutions to the aerospace sector. When with a vast inventory available for JIT solutions. In addition, the company has a comprehensive sourcing system to appropriate, AEROid designs bespoke hardware and writes appropriate software. All hardware is manufactured by complement its in-house inventory and is recognised throughout the industry as being a significant partner in key third party partners or specialists and in some cases, therefore, the company acts as a value added reseller of such programmes. things as RFID ‘tags’, reads and antennae. Business type(s): Equipment/Systems, Facilities, Services Business type(s): Equipment/Systems, Services

Aeromet International Plc Eurolink Way, Sittingbourne, Kent. ME10 3RN United Kingdom Tel : +44 (0)1795 415 000 Fax : +44 (0)1795 415 015 [email protected] www.aeromet.co.uk

AS 9100

Aeromet International Plc is a world leader in light alloy casting and sheet titanium products, supplying parts to the world's major airframe, engine and OEM manufacturers. Aeromet can produce aluminium investment castings up to 1.5 metre cubed by both conventional and Sophia high property processes, and aluminium sand castings up to 500kg and magnesium castings up to 250kg. Aeromet has the largest selection in the world of presses for Super Plastic Formed, Hot Formed or Diffusion Bonded sheet metal products that allow parts to be produced up to 2 metres square or 4 metres x 1 metre. Business type(s): Component, Facilities, Materials, Platform, Services

.06 .07 members' index Air Parts Limited Aircraft Maintenance & Support Services Limited Nigel Bacon House, Unit 2, Chertsey Road, Byfleet, Surrey. KT14 7AX United Kingdom Eagle House, Village Farm Industrial Estate, Pyle, Nr Bridgend, . CF33 6NU United Kingdom Tel : +44 (0)1932 350 009 Fax : +44 (0)1932 350 116 Tel : +44 (0)1656 743700 Fax : +44 (0)1656 744265 [email protected] www.air-parts.co.uk [email protected]

ISO 9001 ISO 9001

Air Parts Limited has been trading since 1989 as a procurement consolidation specialist for BAE Systems and their Aircraft Maintenance & Support Services Limited is one of Europe's largest designers and manufacturers of ground subcontractors. The company supplies military aircraft spares and commercial aircraft spares. support equipment. AMSS' customer profile and market penetration with airlines and military agencies worldwide Business type(s): Component clearly demonstrates their continued confidence in AMSS' products and commitment to total care. AMSS’ products are extremely practical, user friendly, easy to maintain, reliable and outstandingly functional. Airbus UK Limited Business type(s): Equipment/Systems New Filton House, Filton, , Avon. BS99 7AR United Kingdom Alcoa Europe Flat Rolled Products Tel : +44 (0)117 969 3831 Fax : +44 (0)117 969 2828 PO Box 383, Kitts Green Road, Kitts Green, Birmingham, West Midlands. B33 9QR United Kingdom www.airbus.com Tel : +44 (0)121 252 8000 Fax : +44 (0)121 252 8001 Airbus is one of the world's leading aircraft manufacturers. The Airbus product line comprises 14 aircraft models, www.alcoa.com from the 100-seat single-aisle A318 jetliner to the 555-seat A380. Airbus has also expanded into the military transport aircraft sector with the introduction of the A400M multi-role military airlifter. Airbus currently has 57,000 AS 9100 employees and is one of the world’s leading aircraft manufacturers. Airbus has headquarters in Toulouse, France but operates 16 development and manufacturing facilities in France, Germany, Spain and the United Kingdom along with Alcoa's first presence in the United Kingdom was in the late 1950s with a rolling and extrusion mill in Swansea, Wales. subsidiaries in the United States, China and Japan, plus a number of regional offices. Today, Alcoa has more than 22 locations throughout England, Wales and Ireland that serve the needs of Europe's aerospace, aluminium ingot, commercial transportation, industrial and packaging and consumer goods markets. Business type(s): Component, Facilities, Services Alcoa's products range from flat rolled sheet for the beverage industry to super alloys and advanced components for aerospace and gas turbine engines. One of the company's more recognisable UK businesses is Baco Consumer Aircelle Limited Products, a leading supplier of household wraps. Business type(s): Equipment/Systems, Platform Bancroft Road, Burnley, Lancashire. BB10 2TQ United Kingdom Tel : +44 (0)1282 419300 Fax : +44 (0)1282 419302 www.aircelle.com Allvac Limited Cyclops Works, President Way, President Park, Sheffield, Yorkshire (South). S4 7UR United Kingdom Aircelle, a subsidiary of the SAFRAN Group, is one of the leading players in the worldwide nacelle market. Aircelle has a presence in the following key market sectors: large nacelles, small nacelles and aerostructures. The company Tel : +44 (0)114 2720081 Fax : +44 (0)114 2201362 is expanding the range of its repairs and support activities, especially on the products that Aircelle has been given [email protected] www.alleghenytechnologies.com after sales service responsibility directly with the operators. AS 9100, AS/EN9100, NATO/MoD Approved, OEM Approved, Testing & Certification Business type(s): Platform, Services Allvac, an Allegheny Technologies company, produces nickel-base and cobalt-base superalloys, titanium-base alloys, metals of exceptional wear resistance, corrosion resistance, heat resistance, toughness, and strength and specialty Aircraft Braking Systems Limited steels for the aerospace industry. 683/685 Stirling Road, Slough, Berkshire. SL1 4ST United Kingdom Business type(s): Facilities, Materials, Services Tel : +44 (0)1753 696 006 Fax : +44 (0)1753 696 012 [email protected] www.aircraftbraking.com

Aircraft Braking Systems Corporation is a leading manufacturer of wheels, brakes, brake control and related systems for the commercial, military and general aviation markets. Located in Akron, Ohio, with a product support facility in Slough, England, ABSC supplies braking systems and components to a wide variety of customers ranging from small aircraft operators to some of the world's major airlines and aircraft manufacturers. Business type(s): Component, Services

.08 .09 members' index Altec Precision Limited AmSafe Bridport Ltd Unit 2A/2B, Bowdurn North Industrial Estate, Bowburn, Durham. DH6 5PF United Kingdom The Court, Bridport, Dorset. DT6 3QU United Kingdom Tel : +44 (0)191 377 0555 Fax : +44 (0)191 377 3013 Tel : +44 (0)1308 456 666 Fax : +44 (0)1308 456 605 [email protected] www.alteceng.co.uk [email protected] www.bridport-aviation.com

ISO 9001 AS 9100, AS/EN9100, BS EN ISO 9001:2000, CAA Approved, Customer Approved, EASA Approved, ISO 9001, OEM Approved Altec Precision was formed in 2006 as a subsidiary of Altec Engineering Limited which was founded in 1978. Altec Engineering has evolved into a company which supplies a diverse range of engineering solutions to a wide range AmSafe Bridport is the world leader in the design, manufacture and support of engineered, aerospace textile solutions of customers, covering many different industries. Altec Precision was founded to survive long term as a reliable for the commercial aerospace and defence industries. Although the company only began designing and manufacturing partner in today’s industrial world, especially the aerospace sector. This enables Altec to expand and grow with nets for the aviation industry in the early 1960s, its heritage in rope and net production can be traced back to the planned investment in technology and people, producing high quality items on time and competitively priced. 13th Century. Part of the AmSafe group of companies, AmSafe Bridport's products range from cargo pallet nets and Business type(s): Facilities tie-down straps, which are used to restrain cargo in an aircraft hold, to helicopter under-slung load equipment for the transportation of military supplies. Each of AmSafe Bridport's products have one common, unifying feature: they are all products whose primary objective is safety or restraint. This is AmSafe Bridport's field of expertise, and why AMETEK Airtechnology Group Limited AmSafe Bridport counts amongst its customer base over 80% of the top 100 airlines as well as the leading airframe manufacturers including Airbus and Boeing. 111 Windmill Road, Sunbury on Thames, Middlesex. TW16 7EF United Kingdom Business type(s): Component, Equipment/Systems, Facilities, Platform, Services Tel : +44 (0)1932 765 822 Fax : +44 (0)1932 761 098 [email protected] www.airtechnologygroup.co.uk Apollo Hitech Limited AS 9100, BS EN ISO 9001:2000, CAA Approved, EASA Approved Stourdale Road, Cradley Heath, Warley, West Midlands. B64 7BG United Kingdom The Airtechnology Group consists of two companies committed to the design and manufacture of specialised fans Tel : +44 (0)1384 566 666 Fax : +44 (0)1384 562 250 and electromechanical components and systems for the aerospace, defence and railway industries. [email protected] www.apollohitech.com Business type(s): Component, Equipment/Systems AS/EN9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000, OEM Approved Amphenol Limited Apollo Hitech has built a wealth of knowledge of aerospace fasteners and parts over 25 years. Apollo uses the latest technology in order to add value to the supply chain and supply quality assured American and European specification Thanet Way, Whitstable, Kent. CT5 3JF United Kingdom aerospace fasteners and hardware to companies worldwide. Tel : +44 (0)1227 773 200 Fax : +44 (0)1227 265 721 Business type(s): Component, Services [email protected] www.amphenol.co.uk ISO 9001 Apollo Metals Plc Amphenol Limited manufactures connectors and cable assemblies throughout the world. Amphenol Limited Apollo House, Redfern Road, Tyseley, Birmingham, West Midlands. is a leading supplier of high performance, harsh environment connectors, filters and EMP devices, fibre optic B11 2BH United Kingdom connectors, data bus systems and high performance cables for both military and industrial applications. The Tel : +44 (0)121 335 5100 Fax : +44 (0)121 335 5054 company has established partnerships with major OEMs and is a supplier to the leading users of electronic [email protected] www.apollometals.com components. Business type(s): Component, Facilities, Services AS/EN9100, AS/EN9120, CAA Approved, Customer Approved, ISO 9002, OEM Approved

Apollo Metals is a world leader in the supply of metals including aluminium, steel, titanium, nickel and bronze to the aerospace, defence, and other high technology industries. With a turnover of $230m and 451 employees, the company provides a value added service to the world's leading aerospace companies and their sub contractors from locations in Australia, China, Finland, France, Germany, Holland, and the UK. Business type(s): Facilities, Materials, Services

APPH Limited 8 Pembroke Court, Chancellor Road, Manor Park, Runcorn, Cheshire. WA7 1TG United Kingdom Tel : +44 (0)1928 579 366 Fax : +44 (0)1928 579 454 [email protected] www.apph.com

APPH, part of BBA Aviation plc, designs and manufactures hydraulic systems and landing gears for the world's aircraft. From design through manufacture to supply, service and support, repair and overhaul, the APPH Group's products are at the forefront of the world's aerospace market. Landing gears and hydraulic components are designed, certified and manufactured for military, civil, business and general aviation markets. APPH repair and overhaul facilities in the UK and US support these aircraft in service. More information is available from www.apph.com. .10 Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services .11 members' index Armstrong Precision Components Limited Babcock Engineered Products Stoneferry Business Park, Foster Street, Hull, East Yorkshire. HU8 8BT United Kingdom Rosyth Business Park, Rosyth, Dunfermline, Fife, Scotland. KY11 2YD United Kingdom Tel : +44 (0)1482 325 425 Fax : +44 (0)1482 327 229 Tel : +44 (0)1383 424 060 Fax : +44 (0)1383 424 127 [email protected] www.apc-caparo.com [email protected] www.babcock.co.uk

AS/EN9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000, OEM Approved, OH SAS 18001:1999 Babcock Engineered Products offers a unique combination of engineering services and skills, which are important in the delivery of complex and innovative projects. The commitment of working in partnership with customers secures Armstrong Precision Components Limited manufacture high quality products from their facility in Hull, producing to the delivery of best value solutions. The in-house skills and expertise enable the undertaking of both new build stringent aerospace, automotive and defence standards, including MS, MA, AS, AGS, DIN, EN, LN in addition to others. manufacture and the refurbishment of hydraulic, electrical and electronic systems. Modular construction has become Recognised as the UK's top manufacturer of specialist threaded fastenings with more than £3 million worth of sales, a core business activity and the company is now recognised as a market leader in the implementation of this method Armstrong Precision Components is a leading supplier of ArmaCoil wire thread inserts to a wide customer base of manufacture. As a result of the company’s success with Heathrow Terminal 5, Babcock is promoting their modular within the aerospace, automotive, engineering and specialist industrial markets. design and build capabilities within the airports sector. The support of the site marine business includes the installation Business type(s): Component and commissioning of enhanced capability and the refurbishment of weapons systems. Business type(s): Facilities, Services Assystem UK Limited Club Street Works, Bamber Bridge, Preston, Lancashire. PR5 6FN United Kingdom BAE SYSTEMS PLC Tel : +44 (0)1772 645 000 Fax : +44 (0)1772 645 001 Warwick House, Farnborough Aerospace Centre, Farnborough, Hampshire. GU14 6YU United Kingdom [email protected] www.assystem.com Tel : +44 (0)1252 373 232 Fax : +44 (0)1252 383 000 [email protected] www.baesystems.com AS/EN9100, IIP Accredited, ISO 9001

Assystem is a leading international group in the field of engineering and innovation consultancy. Assystem improves AS/EN9100, CAA Approved, IIP Accredited, ISO 9001, JAR Approved, NATO/MoD Approved, return on investment for customers at each stage of the product life cycle by implementing advanced technologies Testing & Certification, UK Anticorruption Forum and supporting innovation in products, production processes and infrastructures. BAE SYSTEMS PLC is the largest European defence company, employing over 90,000 people over 5 continents. With Business type(s): Component, Equipment/Systems, Facilities, Platform, Services an order book of £51.2 billion and annual sales in excess of £14 billion, BAE SYSTEMS is a major force in the worldwide aerospace and defence markets. The Air Systems Business Unit is tasked with maximising the Company's position in the military air market sector. The prime focus is on the needs of the customer from initial briefing through the AviateQ International Limited design, build and test stages to delivery. Air Systems is focused on driving operational efficiency and working with its , Farnborough, Hampshire. GU14 6XA United Kingdom customers and suppliers to deliver its commitments worldwide. Air Systems employs 10,500 people on four military aircraft businesses - Typhoon, Nimrod, Hawk and JSF - and its New Business team. Tel : +44 (0)1252 526 177 / 8 Fax : +44 (0)1252 526 179 [email protected] www.aviateQ.com Business type(s): Component, Equipment/Systems, Facilities, Services CAA Approved, ISO 9001, JAR Approved Barnbrook Systems Limited AviateQ International Limited is a broad-based aviation business offering quality consultancy services to the aviation 25 Fareham Park Road, Fareham, Hampshire. PO15 6LD United Kingdom industry. Main areas of focus are audits of aircraft operators (rotary and fixed wing), maintenance base facilities, airports, Helidecks and associated systems. All audits are to JAR, EASA, FAR, ICAO standards. AviateQ is a leader in Tel : +44 (0)1329 847722 Fax : +44 (0)1329 844132 the delivery of Safety Management Systems for Aerodromes and Aircraft Operators and is currently developing [email protected] www.barnbrook.co.uk specialist software for the management of aviation hazards and occurrences. Barnbrook Systems Limited is a British company founded in 1978 designing, manufacturing and selling switching devices, Business type(s): Equipment/Systems, Services actuators, circuit breakers, solenoids and pressure transducers for in-flight requirements. Fire suppression actuators specifically designed for aerospace, defence and rail applications. Specific engine controls, both repair and new build Axis Electronics Limited typically for Harrier, Tornado, Gulfstream, Boeing and Raytheon. Business type(s): Component, Equipment/Systems Bedford Heights, Manton Lane, Bedford, Bedfordshire. MK41 7NY United Kingdom Tel : +44 (0)1234 321625 Fax : +44 (0)1234 364941 [email protected] www.axis-electronics.com

BS EN ISO 9001:2000, Customer Approved, OEM Approved

Axis Electronics Limited is a specialist provider of electronic manufacturing services. With particular emphasis on high reliability, complex PCB assembly, Axis has built a thriving business from aerospace, defence, oil and gas, industrial and instrumentation sectors. Focusing primarily on low to medium volume, Axis offers high reliability complex electronic assembly, box build and test. Axis has supplied aerospace products into the supply chain for many major programmes including Typhoon and A380. The company also supplies circuit boards for aerospace communications and more recently has developed an innovative solution to runway incursions (www.groundmarker. com). Business type(s): Component, Equipment/Systems, Facilities, Platform, Services .12 .13 members' index Barnes Aerospace Bird & Bird European Headquarters, 3 Gleneagles House, Vernon Gate, Derby, Derbyshire. DE1 1UP United Kingdom 15 Fetter Lane, London. EC4A 1JP United Kingdom Tel : +44 (0)1332 206 670 Fax : +44 (0)1332 331 750 Tel : +44 (0)20 7415 6000 Fax : +44 (0)20 7415 6111 [email protected] www.barnesaero.com [email protected] www.twobirds.com

AS 9100, ISO 9001, ISO 9002, NADCAP, OEM Approved Bird & Bird is an international commercial law firm combining leading-edge legal expertise with an in-depth understanding of chosen high technology industry sectors. Bird & Bird’s International Aviation & Aerospace Group Barnes Aerospace is a worldwide producer of machined and fabricated components and assemblies for aircraft includes lawyers who have spent long periods of their careers working in the industry (for airlines and manufacturers). engine and airframe builders. Headquartered in Windsor, Connecticut, the company is a primary business of Barnes The company advises in all areas of aerospace and defence, asset management and financing, and civil aviation; acting Group Inc., a diversified international company serving a wide range of industrial markets with precision metal parts for airlines, leasing companies, ground handlers, manufacturers, aircraft maintenance and repair organisations, and industrial supplies. Founded in 1857 and headquartered in Bristol, Connecticut, Barnes Group, Inc. consists of reservation system operators, industry associations, travel service providers, airports and banks. three separate businesses employing nearly 4,000 people at over 40 locations worldwide. Business type(s): Services Business type(s): Component, Facilities, Platform, Services

BAS Aerospace Limited Blue Arrow Limited 800 The Boulevard, Capability Green, Luton, Bedfordshire. LU1 3BA United Kingdom Cramptons Road, Sevenoaks, Kent. TN14 5DS United Kingdom Tel : +44 (0)800 08 55 777 Fax : +44 (0)1582 698 598 Tel : +44 (0)1732 450011 Fax : +44 (0)1732 455884 [email protected] www.bluearrow.co.uk [email protected] www.bas-aerospace.com Founded over 40 years ago, Blue Arrow is today one of the UK’s largest recruitment businesses. We provide specialist CAA Approved, ISO 9001 recruitment services through a network of 150 specialist sector branches, on-site managed services, call-centres and BAS Aerospace Limited provides confidence to manufacturers worldwide in the quality, reliability and cost-effective online. We provide end-to-end full service staffing solutions to all sizes of companies throughout the aerospace, office, delivery of its range of fasteners. BAS has the design, production and engineering capabilities to meet customers' industrial, catering, driving and construction industries. total requirements for fastening solutions, combining an innovative approach to fastening design with established Business type(s): Services standards of production at all its manufacturing sites. ISO9001 and QS9000, CAA A2, C2 and compliant with all international aerospace standards. Böhler-Uddeholm (UK) limited Business type(s): Component, Platform European Business Park, Taylors Lane, Oldbury, West Midlands. BCF Designs Limited B69 2BN United Kingdom Tel : +44 (0)121 627 9261 Fax : +44 (0)121 552 8625 Phoenix House, Phoenix Way, Cirencester, Gloucestershire. GL7 1QG United Kingdom [email protected] www.steels.co.uk Tel : +44 (0)1285 642 434 Fax : +44 (0)1285 640 606 As a worldwide special steel producer with a long tradition of melting and remelting technology, Böhler is ideally [email protected] www.bcfdesigns.co.uk equipped to offer a wide range of aerospace grade steels and nickel-based alloys covering BS, AMS and other ISO 9001, OEM Approved international standards. Forms of supply include billet, bar, sheet, plate, forgings and rolled profiles. Business type(s): Materials, Services BCF Designs Limited specialises in the design and supply of aerospace testing solutions. Products include Mil-Std- 1553 Databus Network Testers, Fuel System Testers, Filter Test Sets for EMC compliance and Digital Avionics ARINC 429 Protocol Testers, which are all available as commercial off-the-shelf equipment. BCF Designs is ISO9001:2000 Bombardier Aerospace and Investor in People approved. Airport Road, Belfast, Northern Ireland. BT3 9DZ United Kingdom Business type(s): Facilities Tel : +44 (0)2890 458 444 Fax : +44 (0)2890 733 396 www.aero.bombardier.com Berck Limited Bombardier Aerospace is a world leader in the design and manufacture of innovative aviation products and services for Works, Pleasant Street, Lyng Industrial Estate, West Bromwich, West Midlands. B70 7DP the business, regional and amphibious aircraft markets. This legacy of innovation consolidates more than 250 years of United Kingdom aviation history and has produced an unparalleled 15 new aircraft programmes since 1989. Tel : +44 (0)121 553 2726 Fax : +44 (0)121 553 1087 Business type(s): Component, Facilities [email protected] www.bercklimited.co.uk

BS EN ISO 14001:2004, ISO 9001

Berck Limited is a SME, established in 1947. Berck Limited Precision Components is a leading manufacturer of quality metal pressings and metal/plastic sub-assemblies for the world's automotive and electronics/electrical industries. Business type(s): Facilities

.14 .15 members' index Bulwell Precision Engineers Limited Castlet Limited Wharf Road Industrial Estate, Pinxton, Nottingham, 14 Crofton Drive, Allenby Road Industrial Estate, Lincoln, Lincolnshire. LN3 4NR United Kingdom Nottinghamshire. NG16 6LE United Kingdom Tel : +44 (0)1522 876700 Fax : +44 (0)1522 522247 Tel : +44 (0)1773 810 102 Fax : +44 (0)1773 861 644 [email protected] www.castleltd.com [email protected] www.bulwell.co.uk BS EN ISO 9001:2000, Customer Approved AS 9100, AS/EN9100, BS EN ISO 14001:2004, CAA Approved, ISO 9001, ISO 9002, JAR Approved, OEM Approved, Testing & Certification Castlet Limited is a privately owned and managed engineering company, primarily involved in the design, manufacture, test and commissioning of ESP power supplies, microprocessors controls and auxiliary equipment and specialising in Bulwell Precision Engineers manufactures machined parts, kits, complex assemblies and integrated point of use providing engineering solutions for the aerospace and defence sector. Castlet Limited supplies both ground support delivery systems for the aerospace and associated industries. As part of the Nasmyth Group of companies, a and flight equipment to the Typhoon Project. combination of many years of experience means the company is able to deliver top quality products on time, every Business type(s): Component, Equipment/Systems, Facilities, Services time, with exceptional levels of customer service. Business type(s): Component, Equipment/Systems, Facilities, Services CAV Aerospace Limited Caledonian Airborne Systems Limited No 1 Industrial Estate, Medomsley Road, Consett, Durham. DH8 6SR United Kingdom Tel : +44 (0)1207 582811 Fax : +44 (0)1207 582812 6 Ninian Road, , Aberdeen, Aberdeenshire. AB21 0PD United Kingdom [email protected] www.cav-aerospace.net Tel : +44 (0)1224 722274 Fax : +44 (0)1224 722896 [email protected] www.caledonian-airborne.com CAV Aerospace is a world-class provider of components and sub-assemblies to the world’s major aircraft manufacturers. Offering full design and manufacture solutions and capabilities to primes, CAV Aerospace Caledonian designs aircraft equipment highly optimised toward their desired role, combining high performance, Aerostructures Division can offer a phenomenal machining capacity, based around medium to large 5-axis machining very high reliability, low power, low emissions, low mass, low volume, airworthy solutions for the aerospace market. capabilities, with full treatments capability to support one-stop, turnkey solutions. CAV can offer design and Caledonian has capabilities from embedded microprocessor architectures, video architectures, RF, software, manufacture capability and expertise for ice protection systems for general aviation, regional and business jets and through to aircraft installations, integrations, aircraft modification designs, installation, tests and certification. UAVs. Business type(s): Equipment/Systems Business type(s): Facilities

Capita Resourcing Limited Centrax Limited ( Integrated HR Services), Kings Chase, 2nd Floor, 107 King Street, Maidenhead, Berkshire. Shaldon Road, Newton Abbot, Devon. TQ12 4SQ United Kingdom SL6 1DP United Kingdom Tel : +44 (0)1626 358 000 Fax : +44 (0)1626 358 165 Tel : +44 (0)1628 408 100 Fax : +44 (0)1628 408 101 [email protected] www.centrax.co.uk [email protected] www.capita.co.uk AS 9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000, Customer Approved, NADCAP, OEM Approved, UK Capita Integrated HR Services (Capita Resourcing Limited) is a leading provider of services spanning the HR Anticorruption Forum spectrum and is part of Capita Group plc, the UK's largest business process outsourcing (BPO) and professional support services organisation. Centrax has a long history in gas turbine engineering, its founder having worked with Sir Frank Whittle. During the past 25 years the company has focused on power generation packaging as well as developing state of the art manufacturing Business type(s): Services processes for complex geometry compressor and turbine hardware. Based in Newton Abbot, Devon, it serves Europe as a generator package provider and provides hardware throughout the world to the major gas turbine OE Castle Precision Engineering (Glasgow) Limited manufacturers. Business type(s): Facilities, Materials, Platform 241 Drakemire Drive, Castlemilk, Glasgow, Lanarkshire, Scotland. G45 9SZ United Kingdom Tel : +44 (0)1416 341 377 Fax : +44 (0)1416 343 678 [email protected] www.castleprecision.com Plc 1500 Parkway, Whiteley, Fareham, Hampshire. PO15 7AF United Kingdom Customer Approved, ISO 9002, NATO/MoD Approved Tel : +44 (0)1489 881880 Fax : +44 (0)1489 881123 Castle Precision Engineering (Glasgow) Limited specialises in CNC production machining, progressing volume [email protected] www.chemring.co.uk precision work. Business type(s): Facilities Chemring is a leading manufacturer of decoy countermeasures and energetic materials for the global defence, security and safety markets. It is a world-class defence company with over 2,000 employees at operations in the UK, US, Europe and Australia, selling to over 70 countries around the world. Chemring comprises four segments: countermeasures, munitions and missiles, explosive ordnance disposal (EOD) and pyrotechnics. Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services

.16 .17 members' index CIMPA Limited Plc New Filton House, Golf Course Lane, Filton, Bristol, Gloucestershire. BS99 7AR United Kingdom Brook Road, Wimborne, Dorset. BH21 2BJ United Kingdom Tel : +44 (0)117 936 4789 Fax : +44 (0)117 936 4786 Tel : +44 (0)1202 882 020 Fax : +44 (0)1202 849 401 [email protected] www.cimpa.com [email protected] www.cobham.com

CIMPA was founded in France 1995 out of the GIE EADS Corporate Research Centre to be the link between research Cobham plc is an international company engaged in the development, delivery and support of advanced aerospace and and practical applications. Specialising in computer integrated manufacturing and industrial applications, CIMPA defence systems for land, sea and air platforms. The company has five technology divisions and one in a service sector continued to step forward and entered the German market with a subsidiary in Hamburg in 2001. Today, CIMPA is a that collectively specialise in the provision of components, subsystems and services that keep people safe, improve fully owned subsidiary of Airbus S.A.S. and present in several European countries. Its target is to address Product communications and enhance the performance of aerospace and defence platforms. Employing more than 10,000 Lifecycle Management issues covering all process aspects from design to manufacturing. people on five continents, Cobham is at the forefront of innovation, developing technologies and products that greatly Business type(s): Services improve the functionality of platforms, with significant operational and logistical benefits. Business type(s): Equipment/Systems, Services Claverham Group Ltd Bishops Road, Claverham, Bristol, Avon. BS49 4NF United Kingdom COM DEV Europe Limited Triangle Business Park, Stoke Mandeville, Aylesbury, Buckinghamshire. HP22 5SX United Kingdom Tel : +44 (0)1934 835 224 Fax : +44 (0)1934 835 337 [email protected] www.claverham.com Tel : +44 (0)1296 616 400 Fax : +44 (0)1296 616 500 [email protected] www.comdev.co.uk AS 9100 NATO/MoD Approved, OEM Approved Claverham Limited specialises in innovative actuation systems and support for aerospace, defence and industry. An established world leader in actuation technology, providing a complete engineering and manufacturing resource for Founded in 1984 COM DEV Europe (CDE) is a microwave and electronics design and manufacturing subsidiary of COM the supply and support of actuation systems and associated equipment, the company meets the specialist demands DEV International. Based in Aylesbury (30 miles north west of London) CDE supplies complex equipment, technology of the aerospace and defence markets. solutions and subsystems for space and terrestrial applications. Its major customers include commercial organisations Business type(s): Equipment/Systems such as Alcatel, Boeing, and SS/Loral together with governmental agencies such as ESA, BNSC and MoD UK. Business type(s): Component, Equipment/Systems Clico (Sheffield) Tooling Limited Unit 7, Fell Road Industrial Estate, Sheffield, Yorkshire (South). S9 2AL United Kingdom Comau Estil Unit 35 Monkspath Business Park, Solihull, West Midlands. B90 4NA United Kingdom Tel : +44 (0)1142 433 007 Fax : +44 (0)1142 434 158 [email protected] Tel : +44 (0)121 701 2100 Fax : +44 (0)121 701 2112 [email protected] www.comau.co.uk Clico has over 50 years experience in meeting the demands placed on cutting tools in the aerospace industry. Clico specialises in cutting tools for non ferrous metals, fibre glass, carbon fibre, acrylic, laminates and other composite BS EN ISO 14001:2004, BS EN ISO 9001:2000 materials. Comau Estil supplies automotive assembly systems to the local OEM and Tier 1 market. Comau Estil is a wholly owned Business type(s): Facilities subsidiary of Comau Spa, in turn wholly owned by Fiat. Business type(s): Facilities CML Group Plc Price Street, Birkenhead, Cheshire. CH41 3PT United Kingdom Conidia Bioscience Limited Tel : +44 (0)151 647 5531 Fax : +44 (0)151 650 0668 Silwood Park, Buckhurst Road, Ascot, Berkshire. SL5 7TA United Kingdom [email protected] www.cml-group.com Tel : +44 (0)1491 829142 Fax : +44 (0)20 7691 9523 AS 9100 www.conidia.com

CML Group provides a comprehensive service in the manufacture of aircraft structures and system components Conidia Bioscience Ltd manufactures and sells the Fuelstat rapid test kit for the detection of microbial contamination from the supply of individual machined or composite components through to complete sub-assemblies or kits of in aviation fuel tanks. This revolutionary immunoassay test determines, within 10 minutes, the level of contamination parts. based on the presence of the jet fuel fungus known as Hormoconis resinae or by its old name Cladosporium resinae. Business type(s): Component The kit is now in use worldwide with well over 100 operators. Fuelstat is marketed by our global distributor, Satair A/S of Denmark. Satair has major offices in Copenhagen, Singapore and Atlanta and representatives in many other countries. Conidia Bioscience Ltd also provides a full consultancy service to the oil supply and aviation industry based on its associated, UKAS accredited laboratories in CAB International. This service covers microbial contamination in all environments, not just fuel tanks and fuels. Conidia Bioscience Ltd is based in Ascot, near Heathrow. Business type(s): Equipment/Systems, Services

.18 .19 members' index Coplan Limited Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire. MK15 8HQ United Kingdom Building 83, Cranfield University Aerospace, Cranfield, Bedfordshire. MK43 0AL United Kingdom Tel : +44 (0)1908 500 000 Fax : +44 (0)1908 500 050 Tel : +44 (0)1234 750 111 Fax : +44 (0)1234 758 205 [email protected] www.coplanlimited.com [email protected] www.cranfield.ac.uk/cua/

Coplan Limited was established in 1987 as a means to minimise FOD costs within the aviation industry and is a Cranfield has been at the forefront of the development of aerospace technology for almost 60 years and is one of supplier of hand tool solutions to the aerospace industry. Coplan Limited products and services include the supply of the largest academic centres in Western Europe for strategic applied research, development and design. Cranfield Stahlwille aviation quality hand tools, visual tool control foam (VTC), laser marking and tool storage solutions. University Aerospace brings together the University’s aerospace capabilities from all its five schools into areas of Business type(s): Equipment/Systems, Facilities strategic importance for its clients, within the aerospace and aviation markets, focused on; air transport management and operations, air vehicles and systems, space systems and applications, aerospace manufacturing, materials and structures, simulation and the synthetic environments, aviation and the environment, resilience and national security Corbus Europe Limited and aerospace management. Regus House, 268 Bath Road, Slough, Berkshire. SL1 4DX United Kingdom Business type(s): Facilities, Services Tel : +44 (0)1753 708 640 Fax : +44 (0)1753 708 641 [email protected] www.corbus.com Cross Manufacturing Company (1938) Limited BS EN ISO 9001:2000 Midford Road, Combe Down, Bath, Somerset. BA2 5RR United Kingdom Tel : +44 (0)1225 837 000 Fax : +44 (0)1225 834 115 Corbus is a wholly owned subsidiary of Soin International, LLC, a multi-national holding company that provides [email protected] www.crossmanufacturing.com strategic management, administrative systems, and financial support to a diverse array of subsidiaries and affiliates. Corbus has a strong presence in US, Europe, Asia-Pacific markets, and a Global Delivery Centre in India. Established Since the 1920s the Cross Manufacturing Company has specialised in the design and manufacture of heat resisting in 1994, the company is a leading supply chain services provider with high focus on procurement outsourcing and IT wrought alloy sealing rings and associated products, combining technology with innovation to achieve world-class services to aerospace, automotive and manufacturing industry. Corbus focuses on both direct as well as indirect quality and precision. procurement, providing a complete managed ‘Source-to-Pay’ solution and services to its clients. Business type(s): Component, Facilities Business type(s): Services

Corus Engineering Steels Limited CTR Carbide Dies Limited 7 Port Hope Road, Sparkbrook, Birmingham, West Midlands. B11 1JS PO Box 50, Aldwarke Lane, Rotherham, Yorkshire (South). S60 1DW United Kingdom United Kingdom Tel : +44 (0)1709 371234 Fax : +44 (0)1709 826233 Tel : +44 (0)121 772 0817 Fax : +44 (0)121 773 9342 [email protected] www.corusgroup.com [email protected] www.ctr-uk.com

Corus is an international metal company, providing steel and aluminium products and services to customers ISO 9001 worldwide. With an annual turnover of £9 billion, the company is comprised of four divisions, strip products, long products, distribution and building systems and aluminium, and has a global network of sales offices and service Established in 1973 and located in the heart of England, CTR Carbide Dies Ltd manufacture carbide and steel machine centres. tooling for the Aerospace fastening industry which we export worldwide. We specialise in the manufacture of complete Business type(s): Facilities, Materials, Services tool kits and offer a fast turn around service, helping our customers achieve their own schedules on-time and in full, which is why we are one of the largest fastener tool manufacturers in the world today. Our expertise is available to our customers with the latest computer aided production system and bar coded trace-ability, giving instant order Counterpoint Market Intelligence Limited progressing. Our continued investment in the latest machining techniques and our on-going training programmes ensure that we continue to stay at the forefront of a competitive market place. We are a ISO 9001/AS9100 accredited Higher Wincombe Farm, Wincombe Lane, Shaftesbury, Dorset. SP7 8QF United Kingdom company. From segmented dies to a variety of coated punches we offer a complete service, which gives our customers Tel : +44 (0)1722 718265 Fax : +44 (0)1300 342178 the option of a sole source of supply if required. [email protected] www.cpmil.com

Counterpoint Market Intelligence Limited (CPMIL) is an independent aerospace management consultancy covering markets, companies, products and technologies. CPMIL specialises in analysis principally at the tier 1 and tier 2 aerospace supplier level, as this is an important time in the evolution of these parts of the market. The company aims to offer original and high quality research and analysis, which can be used as a strategic decision-making tool. Business type(s): Services

.20 .21 members' index CTS Electronics Manufacturing Solutions Delcam Plc Block 6/Block 16, Blantyre Industrial Estate, High Blantyre, Glasgow, Strathclyde, Scotland. Small Heath Business Park, Birmingham, West Midlands. B10 0HJ United Kingdom G72 0XQ United Kingdom Tel : +44 (0)121 766 5544 Fax : +44 (0)121 766 5565 Tel : +44 (0)1698 505 050 Fax : +44 (0)1698 506 050 [email protected] www.delcam.com [email protected] www.ctscorp.com/ems AS 9100, AS/EN9100, ISO 9001:2003 AS 9100, BS EN ISO 14001:2004, ISO 9001 Delcam is one of the world's leading suppliers of advanced CADCAM software product development solutions for the CTS Electronics Manufacturing Solutions is a specialist provider of electronics manufacturing services. Based in manufacturing industry. The company has grown steadily since being founded formally in 1977, after initial development Glasgow, CTS operates an AS9100 accredited, 100,000 sq ft facility offering the following products and services to work at Cambridge University, UK. It is now the largest developer of product design and manufacturing software in the aerospace customers - medium to high-end complexity PCB and backplane assembly, box build systems integration, UK, with subsidiaries in , Europe and Asia. Delcam's software is used by more than 15,000 organisations design and development engineering, test engineering services, NPI support, volume transfer, direct ship (worldwide), in over 80 countries. servicing and repair, and supply chain management. CTS is also ISO 14001 and ISO9001:2000 certified, and builds to Business type(s): Equipment/Systems, Services IPC Class III standards. CTS has seven other facilities worldwide - three in the USA and one each in Mexico, China, Singapore and Thailand. Denroy Plastics Limited 9-11 Balloo Drive, Balloo Industrial Estate, Bangor, County Down, Northern Ireland. BT19 7QY Daher Aerospace Limited United Kingdom c/o Barron McCann Ltd., Meteor Centre, Mansfield Road, Derby, Tel : +44 (0)28 91 474 822 Fax : +44 (0)28 91 277 553 DE21 4SY United Kingdom [email protected] www.denroy.com Tel : +44 (0)1283 736 900 Fax : +44 (0)1332 243 607 [email protected] www.daher.co.uk AS 9100, BS EN ISO 9001:2000, Customer Approved Denroy Plastics Limited is a manufacturing company specialising in the design and manufacture of custom moulded BS EN ISO 14001:2004, BS EN ISO 9001:2000, Customer Approved, IIP Accredited, NATO/MoD Approved products. Established in 1972, the company supplies precision injection mouldings to the aerospace industry for DAHER AEROSPACE, a subsidiary of the international DAHER Group, specialises in the design and supply of both civil and military applications. Customers include BAE Systems, Airbus, Thales, Bombardier Aerospace, and their equipment and services to aerospace and other industries. All group products and services are available via DAHER subsidiaries. Typical parts include: structural wing fairings, cable clamp assemblies, cockpit air vents, radomes, pilot AEROSPACE with UK operations focusing on logistics services and equipment for the Aerospace, Defence and Nu- tube covers, lenses, and seal rings. Denroy can provide a complete design solution from concept design using 3D clear sectors. CAD modelling through to manufacture. The modern manufacturing operation employs approximately 150 people and comprises more than 40 injection moulding machines with capacities from 5 to 720 tonnes. Business type(s): Equipment/Systems, Services Business type(s): Component, Facilities, Materials Darchem Engineering Limited Deutsch UK Ironmasters Way , Stillington, Stockton-on-Tees, Yorkshire (North). TS21 1LB United Kingdom 4 Stainer Road, Castleham Industrial Estate, St Leonards on Sea, East Sussex. TN38 9RF United Kingdom Tel : +44 (0)1740 630 461 Fax : +44 (0)1740 630 529 [email protected] www.darchem.co.uk Tel : +44 (0)1424 852721 Fax : +44 (0)1424 851532 [email protected] www.deutschltd.com AS 9100 AS 9100, BS EN ISO 14001:2004, CAA Approved, ISO 9001, NATO/MoD Approved, OEM Approved Darchem has three business units, two of which provide engineered solutions to the high temperature problems of, primarily, the aerospace industry. The third provides fire protection and high temperature insulation solutions for With more than 30 years experience in design and manufacturing at its own facilities, Deutsch Limited can provide the offshore and nuclear markets. Darchem utilises computer aided design techniques and software, combined with interconnection solutions for the most demanding of environments, land, sea or air. With dedicated specialised project on site fire testing facilities, and unrivalled expertise to provide the optimum engineered solution to customers' high teams formed, customers can be assured of a high level of service from original design concept through to production. temperature problems. Product portfolio includes industry standard connectors and specialised design for purpose solutions including fibre optic and EMC filter products. Future product development will include high speed data and high current power Business type(s): Component, Facilities connectors. Defence Aviation Repair Agency (DARA) Business type(s): Component DARA Components, Almondbank, Perth, Perthshire, Scotland. PH1 3NQ United Kingdom Tel : +44 (0)1446 755000 Fax : +44 (0)1446 755737 [email protected] www.daranet.co.uk

The Defence Aviation Repair Agency (DARA) is one of Europe’s largest organisations for the repair, overhaul and maintenance of helicopters, fixed wing aircraft, electronics and components. DARA benefits from more than sixty years of experience, with a reputation for engineering excellence and reliability. DARA operates 4 centres of excellence across the UK. Business type(s): Component, Equipment/Systems, Facilities, Services .22 .23 members' index Dolgarrog Aluminium Limited Eaton Aerospace Limited Clark Street, Dolgarrog, Gwynedd, Wales. LL32 8JH United Kingdom Larchwood Avenue, Bedhampton, Havant, Hampshire. PO9 3QL United Kingdom Tel : +44 (0)1492 614 260 Fax : +44 (0)1492 614 295 Tel : +44 (0)2392 487260 Fax : +44 (0)2392 492400 [email protected] www.dolgarrog.com www.aerospace.eaton.com

AS/EN9100, BS EN ISO 9001:2000, NADCAP AS 9100

Dolgarrog Aluminium Limited is a manufacturer of aerospace aluminium sheet and thin plate. The company offers Eaton Aerospace is a leading designer, manufacturer and integrator of fluid power generation and conveyance, small minimum order quantities, short lead times and excellent service. Dolgarrog Aluminium Limited is certified to electromechanical actuation and motion control, electric distribution and control, cockpit controls and displays and BS EN ISO 9001 and AS/EN 9100 and has approvals from Airbus UK, BAE, , , Raytheon fluid monitoring and sensor products and systems for a worldwide group of diverse customers. For eighty years, Eaton and Rolls-Royce. has been the innovator and pioneering leader in the development of hydraulics and motion control components and Business type(s): Materials, Services systems. Business type(s): Equipment/Systems Doncasters Limited 28-30 Derby Road, Melbourne, Derby, Derbyshire. DE73 1FE United Kingdom EDM Limited 2 Baxter Street, Manchester Road, Hollinwood, Oldham, Lancashire. OL8 4RG United Kingdom Tel : +44 (0)1332 864900 Fax : +44 (0)1332 864888 [email protected] www.doncasters.com Tel : +44 (0)161 947 3500 Fax : +44 (0)161 683 4463 [email protected] www.edm.ltd.uk The Doncasters Group is a leading international manufacturer that supplies precision components and assemblies to the aerospace, power generation, specialty automotive and medical orthopaedic industries. Doncasters excels in Predominantly working in the fields of training and simulation, EDM is a specialist hardware manufacturer and working with alloys and metals that are difficult to shape and form. The company's unparalleled range of products integration company. EDM Limited is an organisation established over 30 years ago and has earned a worldwide and processes has been developed to offer customers a broad, vertically integrated capability. Core manufacturing reputation for providing high quality products with total customer support. The business is growing and increasing its processes include precision casting, forging, fabrication, machining and production of superalloys. Key aerospace capabilities on an annual basis. products manufactured include fan, compressor and turbine airfoils, rings and casings, structural castings, Business type(s): Equipment/Systems, Services combustion and airframe fabrications and exhaust assemblies. The company offers well-developed supply chain integration solutions, delivering complex assemblies and engine-ready components to its customers. Doncasters operates from sites across Europe, the USA and Mexico and has institutionalised lean manufacturing and Six Sigma EKES Limited principles throughout its operations. Kelvin Building, Scottish Enterprise Technology Park, Bramah Avenue, East Kilbride, Lanarkshire. Business type(s): Component, Facilities, Materials, Platform, Services G75 0RD United Kingdom Tel : +44 (0)1355 595560 Fax : +44 (0)1355 595566 EADS UK Limited [email protected] www.ekes.co.uk 111 Strand, London. WC2R 0AG United Kingdom Customer Approved, ISO 9001 Tel : +44 (0)20 7845 8400 Fax : +44 (0)20 7845 8401 East Kilbride Engineering Services (EKES) was formed in 1996 by a core team of highly skilled, professional, Rolls- [email protected] www.eads.com Royce aero engineers. EKES is a dynamic team of design and analysis consultants with an experience in a multitude of UK Anticorruption Forum engineering disciplines. Now in its 10th year, EKES employs 200 high-calibre engineers across a dozen sites in the UK and EU. EADS is a global leader in aerospace, defence and related services. The Group includes the aircraft manufacturer Business type(s): Services Airbus, the world's largest helicopter supplier Eurocopter and the joint venture MBDA, the international leader in missile systems. EADS is the major partner in the Eurofighter consortium, is the prime contractor for the Ariane launcher, develops the A400M military transport aircraft and is the largest industrial partner for the European Electronic Data Systems Limited satellite navigation system Galileo. EADS emerged in 2000 from the link-up of the German DaimlerChrysler PO Box 31, Moor Lane , Derby, Derbyshire. DE24 8BJ United Kingdom Aerospace AG, the French Aerospatiale Matra and CASA of Spain. Business type(s): Equipment/Systems, Facilities, Services Tel : +44 (0)1332 242 424 Fax : +44 (0)1332 249 936 [email protected] www.eds.com

EDS, the world's most experienced outsourcing services company, with more than 9,000 people serving 300+ transportation clients, delivers superior returns to clients through its cost-effective, high-value services model. EDS' core portfolio comprises IT and business process outsourcing services, as well as IT transformation services. EDS' two complementary, subsidiary business are A. T. Kearney, one of the world's leading high-value management consultancies and UGS PLM Solutions, a leader in product data management, collaboration and product design software. Business type(s): Services

.24 .25 members' index Engineering Technology Group Farsound Engineering Limited Rhodes House, Northfield Road, Southam, Warwickshire. CV47 0FG United Kingdom Unit 3, Highams Park Industrial Estate, Jubilee Avenue, London. E4 9JD United Kingdom Tel : +44 (0)1926 818 418 Fax : +44 (0)1926 818 414 Tel : +44 (0)20 8498 3888 Fax : +44 (0)20 8498 3887 [email protected] www.engtechgroup.com [email protected] www.farsound.co.uk

Engineering Technology Group combines the expertise of four high-technology companies, Chiron Werke UK, Turning AS9120 Technolgies, Hyfore Engineering and Hyfore Mation. The Group has an excellent reputation for supplying Chiron and Nakamura machine tools together with excellence in customer support in pre and post sales. Farsound Engineering Limited is focused on dedicated support for its customers. Expertise in design and development, precision engineering, supply chain and logistics management through an international network can deliver improved Business type(s): Facilities, Services efficiency, streamlined work flows and generate cost-effective supply solutions. Services include; design and development, precision engineering and component manufacture, component recovery repair and kitting, supply chain ENL Limited management, and comprehensive supply solutions. Business type(s): Facilities, Services Victory Trading Estate, Kiln Road, Portsmouth, Hampshire. PO3 5LP United Kingdom Tel : +44 (0)2392 668 517 Fax : +44 (0)2392 673 370 www.enl.co.uk Finmeccanica UK Limited 8th Floor, 39 Victoria Street, London. SW1H 0EU United Kingdom AS/EN9100, BS EN ISO 9001:2000, OEM Approved Tel : +44 (0)20 7340 6100 Fax : +44 (0)20 7340 6199 ENL Limited is dedicated to excellence in the manufacture of high quality mould tools and technical injection www.finmeccanica.com moulding, machining and assembly. The company is a total service supplier, moving products from concept, through prototyping and into high volume production. A proven track record in the design, development and manufacture of The Finmeccanica Group is the Italian leader in high technology. Its companies are co-ordinated by Finmeccanica many successful products has attracted a diverse range of blue chip organisations. S.p.A., the holding company that provides industrial and strategic control. Thanks to a well-focused strategy of Business type(s): Facilities, Materials international positioning and development, today the Finmeccanica Group plays key roles in every main programme and project in the strategic aerospace and defence sector, contributing its own exclusive design, development and production competence. Production activities are concentrated in aeronautics, helicopters, space and defence, with ESR Technology Limited additional well-established skills and production assets in the transport, energy and information technology sectors. Finmeccanica also has an indirect shareholding of about 6.6% in STMicroelectronics, the third largest group worldwide Whittle House, 410 The Quadrant, Birchwood Park, in microelectronics. Risley, Warrington, Cheshire. WA3 6FW United Kingdom Business type(s): Equipment/Systems, Facilities, Materials, Platform, Services Tel : +44 (0)1925 843 400 Fax : +44 (0)1925 843 500 [email protected] www.esrtechnology.com Ford Component Manufacturing Limited BS EN ISO 14001:2004, BS EN ISO 9001:2000, ISO 14001, ISO 9001 East Side, Tyne Dock, South Shields, Tyne & Wear. NE33 5ST ESR Technology provides engineering, safety, risk and operational efficiency management services to the aviation United Kingdom industry. ESR Technology's multi-disciplinary consultancy teams help customers to accommodate new technology, Tel : +44 (0)191 454 0141 Fax : +44 (0)191 456 0028 provide higher levels of safety assurance, improve availability, make regulation more effective, ensure regulatory [email protected] www.fordcomps.co.uk compliance and minimise the risk of rapid change. Business type(s): Equipment/Systems, Facilities, Platform, Services AS/EN9100, BS EN ISO 9001:2000, OEM Approved

Ford Component Manufacturing Limited is an award-winning, highly successful specialist in the precision machining Excel (Electronics) Assemblies Limited of components for the aerospace, defence and commercial industries. Two divisions, Ford Aerospace and Ford Commercial, provide a first-class, make-to-print service for a broad range of customers. Ford Aerospace 14 Baglan Way, Baglan Industrial Park, Port Talbot, Glamorgan, Wales. SA12 7BY United Kingdom manufactures Easipeel®, laminated shim as stock or formed components. Tel : +44 (0)1639 814 000 Fax : +44 (0)1639 812 222 Business type(s): Component, Facilities [email protected] www.excelassemblies.co.uk AS/EN9100, IIP Accredited, ISO 9001, NATO/MoD Approved Freeman & Proctor Limited Excel (Electronics) Assemblies Limited, established in 1987, specialises in the manufacture of electrical wiring PO Box 22, Centrovell Estate, Caldwell Road, Nuneaton, Warwickshire. CV11 4NG United Kingdom systems, sub assemblies and high level box build with co-located technical and on-site installation support services. Tel : +44 (0)24 7638 2032 Fax : +44 (0)24 7637 4353 Excel directly supports the likes of Airbus, EADS and . Their facilities in South Wales and in Holland [email protected] www.freemanandproctor.co.uk are both ISO9001 and AS9100 approved and are staffed by IPC certified manufacturing experts. Business type(s): Component, Equipment/Systems, Services Freeman & Proctor Limited are specialist designers and manufacturers of aerospace pipes, high quality tubular and sheet metal fabrications, and assemblies supplied to international aerospace and specialist automotive industries. In-house facilities include CNC, tube bending, machining, measuring centre and a comprehensive tool-room. Capability for complex assembly of flight control systems. Systems integration and project management, technical support is available from the design stage. Full CAD Design Service. Specialist skills available in welding and brazing of all materials, including nimonics, titanium, aluminium and stainless steel. .26 Business type(s): Component, Equipment/Systems, Facilities, Platform, Services .27 members' index Freudenberg Simrit LP GE Sensing Unit 7 - Wycliffe Industrial Park, Leicester Road, Lutterworth, Leicestershire. LE17 4HG United Kingdom Druck Limited, Fir Tree Lane, Groby, Leicester, Leicestershire. LE6 0FH United Kingdom Tel : +44 (0)1455 204 444 Fax : +44 (0)1455 204 466 Tel : +44 (0)116 231 7100 Fax : +44 (0)116 231 7103 [email protected] www.simrit.com [email protected] www.druck.com

AS 9100, AS/EN9100, AS9120 GE Sensing manufactures aircraft ground support equipment including air data test sets, pressure instrumentation, primary and secondary pressure standards for avionics calibration as well as pressure sensors for aircraft and Freudenberg Simrit LP specialises in technology for seals and vibration control. The Simrit range of services includes aircraft engines. expert advice on both standard products and customer specific solutions, together with on-site product stocks for swift delivery response. Be it agricultural and construction machinery, diesel engines or aerospace, Freudenberg's Business type(s): Equipment/Systems customers can be found in all sectors of industry. The Simrit brand conveys a commitment to offer customers the best service and the greatest possible benefit to their products. General Dynamics UK Limited Business type(s): Component, Equipment/Systems, Materials, Platform, Services Bryn Brithdir, Oakdale Business Park, Oakdale, Blackwood, Gwent, South Wales. NP12 4AA United Kingdom Front Ideas Limited Tel : +44 (0)1495 236300 Fax : +44 (0)1495 236400 Beehive Works, Milton Street, Sheffield, Yorkshire (South). S3 7WL United Kingdom [email protected] www.generaldynamics.uk.com Tel : +44 (0)114 2727370 Fax : +44 (0)114 2726970 AS 9100, UK Anticorruption Forum [email protected] www.frontideas.com General Dynamics UK Limited is part of General Dynamics Corporation, one of the top six defence companies Front Ideas Limited is an advertising and design agency that helps clients achieve more through better worldwide. General Dynamics UK occupies four locations in the United Kingdom and employs 1,000 highly skilled staff communications. The company has a consultative approach and works with clients to increase sales, improve producing world class solutions in military communications, battlespace management, mission systems and information customer communication and to enter new markets. Front works in the aviation sector with airframe manufacturers management applications for its customer base around the world. General Dynamics UK Limited is a leading supplier such as Bombardier Aerospace, service companies such as Skyjet International, support providers such as TOTAL of communications, to support digitisation and integrated networks that deliver increased military capability through Lubricants plus airport groups such as City Hopper Airports. the effective application of network infrastructures, management applications and integrated battlefield information Business type(s): Services systems. Business type(s): Equipment/Systems Gardner Group Limited Head Office, Whitacre Road, Nuneaton, Warwickshire. CV11 6BP United Kingdom Generation Metals International Limited Unit 4 Sterling Way, Norcot Ind Estate, Reading, Berkshire. RG30 6HW United Kingdom Tel : +44 (0)2476 321 320 Fax : +44 (0)2476 321 321 [email protected] www.gardner-aerospace.com Tel : +44 (0)1189 728 320 Fax : +44 (0)1189 410 133 [email protected] www.generationmetals.com Gardner Group Limited delivers machining and fabrication solutions with a single source and with the skills to deliver on time and at substantially reduced cost. Gardner’s core competences are: sheet metal forming, precision AS 9100, AS/EN9100, CAA Approved, ISO 9001, ISO 9002, OEM Approved machining, metal treatments, assemblies and spares, repairs and development. Generation Metals International Limited has been servicing the aerospace industry for 25 years and continues Business type(s): Facilities, Materials to sustain and form successful partnerships across the globe. Based in Reading, Generation Metals stocks a comprehensive range of local and international specifications in aluminium, stainless steel, titanium and nickel based alloys. These are kept in the forms of bar, sheet, plate, tube and extrusions. GE Aviation (formerly Smiths Aerospace) Business type(s): Facilities, Materials, Services Bishops Cleeve, Cheltenham, Gloucestershire, GL52 8SF United Kingdom Tel : +44 (0)1242 661 638 Fax : +44 (0)1242 661 441 GKN Aerospace Services Limited [email protected] www.ge.com/aviation Ferry Road, East Cowes, Isle of Wight, Hampshire. PO32 6RA United Kingdom CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved, OEM Approved Tel : +44 (0)1983 294 101 Fax : +44 (0)1983 291 006 [email protected] www.gknaerospace.com GE Aviation, through its Systems division, (formerly Smiths Aerospace) is a leading global provider of innovative solutions to builders and operators of military and civil aircraft and engines, from large transport to fighters and AS 9100 UAVs, helicopters to regional jets and business jets. GE’s Systems division is a transatlantic aerospace systems and equipment business, with a unique range of specialisations essential to create affordable integrated aerospace GKN Aerospace is the aerospace division of GKN plc, and is structured into three product focus businesses, Engine systems, critical to aircraft performance, through our expertise in digital, electrical power and mechanical systems. Products, Aerostructures and Special Products. GKN Aerospace's operations are global, employ over 6,500 people Our key capabilities include platform computing systems; information systems; electromechanical systems; electrical and supply all the major airframe and aero engine manufacturers. The Company areas of expertise include composite power generation, conversion, distribution and management systems; fuel management and aerial refueling; flight materials, metallics and transparencies. It is recognised as one of the leading independent suppliers of composite management; crew information systems; flight control, engine actuation; landing gear systems; aerostructures; structures for civil and military aircraft and offers a full range of metal fabrication facilities manufacturing complex, propellers and mission management. Our global Customer Services organisation provides tailored integrated high performance assemblies for aero-engines and airframes. In transparencies, the Company is the leading supplier to support solutions to maximize aircraft availability for our customers. We support 1,400 customers in 140 countries the military and civil aerospace market. through a network of global, strategically located facilities and personnel. Business type(s): Component, Equipment/Systems, Materials, Platform, Services .28 Business type(s): Component, Equipment/Systems, Platform, Services .29 members' index Glenair UK Limited Hampson Group plc 40 Lower Oakham Way, Oakham Business Park, Mansfield, Nottinghamshire. NG18 5BY United Kingdom 7 Harbour Buildings, Waterfront West, Dudley Road, Brierley Hill, West Midlands. DY5 1LN Tel : +44 (0)1623 638 100 Fax : +44 (0)1623 638 111 United Kingdom [email protected] www.glenair.com Tel : +44 (0)1384 485 345 Fax : +44 (0)1384 485 346 [email protected] www.hampsongroup.com AS9120, BS EN ISO 9001:2000, ISO 9001, OEM Approved AS 9100, AS/EN9100, BS EN ISO 14001:2004, CAA Approved, Customer Approved, ISO 14001, ISO 9001, For over 30 years, Glenair UK has been supplying the European aerospace industry with a wide range of ISO 9001:2003, NADCAP, OH SAS 18001:1999 interconnection components and systems. Today Glenair UK employs over 400 people at facilities in Mansfield, England serving a wide range of industries around the globe, including telecom, aerospace, marine, off-shore, mass Hampson is a dynamic, international Group serving the global aerospace, automotive and specialist engineering transit and utilities. As a BS EN ISO9001 accredited company, Glenair UK has become the supplier for many OEM markets. Listed on the , Hampson provides added-value solutions in precision engineering, companies, whether it is connector accessories, complex micro and nano harness assemblies, conduits, moulded manufacturing and supply chain management to many of the world’s most respected and innovative companies. harness systems or fibre optic tool kits and connector-assembly tooling. Their project management, design, Hampson’s operations are structured into four segments, operating from fifteen manufacturing sites and facilities integrated manufacturing and distribution delivers on-time affordable solutions. spanning three continents. Through this global footprint we provide leading-edge, fully integrated manufacturing Business type(s): Component, Facilities, Materials, Platform, Services solutions for: aerostructural components and assemblies [HAFA & C&T]; performance-critical components for gas turbine engines; close tolerance components and rotating assemblies for turbochargers, fuel delivery and hydraulic applications; precision tooling systems for large, composite aerostructures; specialist engineering and industrial UK components. Over 1,600 employees in 16 manufacturing sites and facilities in the UK/USA/India. Pitstone Green Business Park, Westfield Road, Pitstone Green, Buckinghamshire. LU7 9GT Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services United Kingdom Tel : +44 (0)121 451 5700 Fax : +44 (0)121 451 6171 Helmet Integrated Systems Limited [email protected] www.goodrich.com Unit 3, Focus 4, Fourth Avenue, Letchworth, Hertfordshire. SG6 2TU United Kingdom Goodrich Corporation is a leading global supplier of systems and services to the aerospace and defence industry. Tel : +44 (0)1462 478 000 Fax : +44 (0)1462 478 010 Goodrich offers an extensive range of products, systems and services for aircraft and engine manufacturers, [email protected] www.helmets.co.uk airlines and defence forces around the world. From aerostructures and actuation systems to landing gear, engine control systems, sensors and safety systems, Goodrich products are on almost every aircraft in the world. BS EN ISO 9001:2000, Customer Approved, ISO 9001, NATO/MoD Approved, Testing & Certification

Business type(s): Component, Equipment/Systems, Platform The principal activity of Helmet Integrated Systems Limited is the design, testing, manufacture and marketing of protective helmets and communications equipment. These helmet systems are used worldwide by military and civil Greene, Tweed & Co Limited aircrews, industry, fire and emergency services, public order, police and prison services. Helmets are fitted with a range of additional equipment including communications systems, conventional headsets, boom and bone conducting Mere Way, Ruddington Fields, Ruddington, Nottingham, Nottinghamshire. NG11 6JS United Kingdom microphones and ANR (Active Noise Reduction). A range of powered respiratory helmets (PAPR - Powered Air Purifying Tel : +44 (0)115 9315 777 Fax : +44 (0)115 9315 888 Respirators), bump caps and browguards, fitted with faceshields provide head, eye, face and respiratory protection, [email protected] www.gtweed.com meeting the PPE safety requirements of industry plus hobbyist and DIY applications. Business type(s): Equipment/Systems UK Anticorruption Forum Greene, Tweed & Co Limited is a world-class leader in sealing solutions from composites to fibre optic connectors, Honeywell Aerospace Yeovil from seals to thermoplastics. Greene, Tweed leverage their expertise in a variety of markets to give customers the competitive advantage in their marketplace while decreasing their total system cost. The company's global Bunford Lane, Yeovil, Somerset. BA20 2YD United Kingdom reach combined with local responsiveness ensures that Greene, Tweed's customers remain a step ahead of their Tel : +44 (0)1935 475 181 Fax : +44 (0)1935 446577 competition. [email protected] www.honeywell.com Business type(s): Component, Facilities, Materials, Platform The UK market is one of the largest national markets for Honeywell in Europe. All four businesses are represented: aerospace, automation and control solutions, specialty materials and transportation systems. Honeywell has over 7,000 Griffonage employees in the United Kingdom. 9 Vyne Road, Basingstoke, Hampshire. RG21 5NU United Kingdom Business type(s): Component, Equipment/Systems, Platform Tel : +44 (0)1256 810143 Fax : +44 (0)1256 470 829 [email protected] www.griffonage.co.uk Houghton UK PLC ISO 9001 Beacon Road, Trafford Park, Manchester, Lancashire. M17 1AF United Kingdom Tel : +44 (0)161 874 5000 Fax : +44 (0)161 877 9764 Griffonage is a specialist consultancy that provides bespoke senior executive search and, via its sister company www.houghtoneurope.com gv Coaching, senior executive coaching exclusively for the aerospace, defence and motorsport industries. Griffonage, which maintains a Quality Management System accredited to ISO 9001:2000, covers all appointments Houghton is one of the world's largest suppliers of specialised metalworking fluids, lubricants and fluid management from subsidiary to parent Board level and is backed by a network of associate research companies in the UK, services. The company's product range which includes metalworking fluids, rust preventatives, quenchants, fire Continental Europe, North America and South East Asia. resistant hydraulic fluids and surface treatment chemicals is fully supported by a team of applications experts based Business type(s): Services in the field and at our state of the art Technical Centre in Trafford Park, Manchester. .30 Business type(s): Facilities, Materials, Services .31 members' index HPL Prototypes Limited IGG Component Technology Limited Windmill Industrial Estate, Birmingham Road, Allesley, Coventry, Warwickshire. CV5 9QE United Kingdom Waterside House, Waterside Gardens, Fareham, Hampshire. Tel : +44 (0)24 7640 7700 Fax : +44 (0)24 7640 3043 PO16 8RR United Kingdom [email protected] www.hplp.co.uk Tel : +44 (0)1329 223 500 Fax : +44 (0)1329 829 312 [email protected] www.igg.co.uk HPL Prototypes Limited provides prototype, show cars, model stacks, tooling, jigs and fixtures. HPL have 2 studios and engineering offices to support OEM teams. Acquired from Lotus Cars and MGA developments, the workforce has Since 1978 IGG has provided specialist EEE (Electronic, Electrical & Electro-mechanical) technical support to the Space been retained and developed. HPL's vision is to be the leading independent UK producer to the aerospace automotive industry. As a Specialist Test House, Parts Procurement and Obsolescence Management company based in Fareham, and transportation industries. IGG encompasses all High Reliability Applications including Aerospace and Defence. We are a leading provider of EEE Business type(s): Facilities Component Evaluation and Consultancy Services. IGG is an ISO 9000: 2001 Company and is a member of the Alter Technology Group. Contact IGG for all your EEE Component requirements. Other members of Alter Technology Group are Tecnológica, Spain; Top-Rel, Italy and HIREX, France. HS Marston Aerospace Business type(s): Equipment/Systems, Facilities, Platform, Services Wobaston Road, Fordhouses, Wolverhampton, West Midlands. WV10 6QJ United Kingdom Tel : +44 (0)1902 572 777 Fax : +44 (0)1902 398 979 Independent Forgings & Alloys Limited [email protected] www.hsmarston.co.uk Victoria Forge, Livesey Street, Sheffield, South Yorkshire. S6 2BL United Kingdom AS 9100, AS/EN9110, BS EN ISO 9001:2000, CAA Approved, Customer Approved, EASA Approved, ISO Tel : +44 (0)114 234 3000 Fax : +44 (0)114 234 0261 14001, NADCAP, NATO/MoD Approved, OH SAS 18001:1999 [email protected] www.forgedinsheffield.com

HS Marston provides a wide range of heat transfer and fluids management products and services for the military AS 9100, AS/EN9100, ISO 14001, ISO 9002, OEM Approved, Testing & Certification, and commercial aerospace markets, motorsport and electronics industries. Design, manufacture and test of heat UK Anticorruption Forum exchangers and fluids management products (PTFE and metallic hose, ducting and rigid pipes). HS Marston has a long history of innovation, dating right back to their antecedent company’s foundation in 1740. Industry leading IFA provide 21st century advanced manufacturing solutions, forging partnerships with suppliers and customers. Our developments continue to keep the company at the forefront of aerospace technology and, with the acquisition specialist open die forging, rolled ring and precision bar product manufacturing capability offer fast track supply of of Palmer Aero Products in 1983, HS Marston became a major force in fluids management. Today, HS Marston unmachined and semi-finished components. Raw material is stocked in ingot and billet form to produce rings, flats, Aerospace operates as an autonomous business unit within Hamilton Sundstrand Engine and Control Systems. squares, rounds and shafts. IFA also has NADCAP heat-treatment, cutting, grinding, sawing, peeling, machining and non- Hamilton Sundstrand is part of United Technologies Corporation, which also includes companies such as Pratt and destructive testing/PMI inspection capability. We also offer fast turn round, high quality hire-work/tollwork of customer Whitney, Sikorsky, Otis Carrier and Chubb. owned materials. Accreditations include AS9100, NADCAP, Honeywell, Rolls-Royce, Westland, Messier-Dowty, ITP. Business type(s): Component, Facilities, Services Business type(s): Facilities

IBM Maximo (formerly MRO Software UK Ltd) Infosys Technologies Limited Normandy House, Bunnian Place, Basingstoke, Hampshire. RG21 7JE United Kingdom 14th Floor, 10 Upper Bank Street, Canary Wharf, London. E14 5NP Tel : +44 (0)1256 343000 Fax : +44 (0)1256 479365 United Kingdom [email protected] www.maximo.com Tel : +44 (0)20 7715 3300 Fax : +44 (0)20 7715 3301 [email protected] www.infosys.com IBM is a provider of asset and service management solutions to the airports industry. Their customers use IBM Maximo asset management software and services for aircraft configuration, maintenance planning and scheduling, Pioneering a new generation of strategic offshore outsourcing, Infosys Technologies Limited (NASDAQ: INFY) provides work execution, materials management, procurement and facilities management, facilitating an organisation’s ability consulting and IT services to clients globally, as partners to conceptualise and realise technology driven business to meet safety requirements and reduce administrative time. transformation initiatives. With over 52,000 employees worldwide, Infosys uses a low-risk Global Delivery Model (GDM) Business type(s): Services to accelerate schedules with a high degree of time and cost predictability.

IDS Ingegneria Dei Sistemi (UK) Limited Ingenia Technology Limited 3 Gloster Court, Whittle Avenue, Segensworth West, Fareham, Hampshire. PO15 5SH United Kingdom Portman House, 43-45 Portman Square, London. W1H 6HN United Kingdom Tel : +44(0)1489 885 807 Fax : +44 (0)1489 584 457 Tel : +44 (0)870 351 2584 Fax : +44 (0)870 351 2585 [email protected] www.idsuk-ltd.co.uk [email protected] www.ingeniatechnology.com

IDS-UK is a British company based in Fareham which provides specialised products and services in the aeronautical Ingenia Technology Limited (ITL) was founded in 2003 with its headquarters in London. The company is an emerging sector relating to electromagnetic compatibility-electromagnetic interference (EMC-EMI), a niche market where international company in the authentication and verification of papers, plastics and metals, as used in documents, the company has established a particularly strong capability in the UK. These form part of a range of services IDS ID cards and product packaging. The technology known as Laser Surface Authentication (LSA) is a revolutionary can offer regarding aeronautical design, including radar cross section simulation and structural design as well technology for authenticating documents, packaging, plastics, metals and ceramics. LSA does not require the addition as the EMC-EMI capability, naval design, aero-navigation and ground penetrating radar. The company is supplying of any security measure such as hologram, special inks or markers or RFID to the item, but instead, it uses low cost both software products and expert services for the UK MoD and has provided software to the US Department of laser to scan the surface of the item and quickly and affordably measure the inherent surface characteristics of the Defence. IDS-UK is part of the Ingegneria dei Sistemi group based in Pisa, Italy. item which represents a unique ‘fingerprint' of the product. Business type(s): Equipment/Systems, Services Business type(s): Equipment/Systems, Services .32 .33 members' index Interchange Solutions Limited J S Chinn Holdings 29 Hill Road, Oakley, Basingstoke, Hampshire. RG23 7HS United Kingdom Coventry Road, Exhall, Coventry, Warwickshire. CV7 9FT United Kingdom Tel : +44 (0)844 800 9311 Fax : +44 (0)844 800 9311 Tel : +44 (0)2476 369 400 Fax : +44 (0)2476 368000 [email protected] www.interchangelimited.com [email protected] www. jschinn.co.uk

UK Anticorruption Forum AS 9100, BS EN ISO 9001:2000, ISO 9002, JAR Approved

Interchange Solutions is a specialist risk consultancy, training and outsourcing company. We deliver an innovative The J S Chinn Group was founded in 1953 by the late Chairman, Mr J S Chinn, and has established itself as a significant and profitable business approach to companies with a commitment to mitigating corruption risks in the commercial, force within British industry. Over a period of almost fifty years the J S Chinn Group of Companies has developed from sales and procurement areas. By mitigating this risk, Interchange helps companies, of all sizes and operating in all a single company into five operating companies, each holding a reputation for precision, quality and reliability. Today, sectors, to seize market opportunities they might otherwise avoid, in countries where corruption is perceived to the companies within the Group are able to demonstrate an extensive range of capabilities and capacities relating to be high. We provide third party due diligence, abcSure® risk assessment, independent internal investigation and all major industries including; aerospace, defence, nuclear and power generation. Group turnover is in excess of £25m enhanced training in risk/raid management and corporate communications. It is Interchange's proven expertise per year. The Group is an approved contractor to the UK Ministry of Defence, operating under their individual approvals in understanding the way our clients conduct their business, our ability to relate well to their management and plus BS EN ISO 9001-9002. employees, and adherence to our underlying principle of doing what's right for their business, that makes us Business type(s): Component, Facilities, Services recognised leaders in best practice anti-corruption management. Business type(s): Services Jabil Circuit UK Inter-Tec Services Limited Oakbank Park Drive, Mid Calder, Livingston, West Lothian, Scotland. EH53 0TJ United Kingdom Tel : +44 (0)1506 447023 Fax : +44 (0)1506 442000 Suite ,1 Unit B2, Olympic Business Park, Dundonald, Ayrshire, Scotland. KA2 9BE United Kingdom [email protected] www. jabil.com Tel : +44 (0)1563 851 005 Fax : +44 (0)1563 850 345 [email protected] www.inter-tec.co.uk AS 9100, ISO 14001, ISO 9001

Inter-Tec Services Limited is an independent consultancy comprising a highly motivated and experienced team of Jabil Circuit, Inc. is a global leader in the Electronic Manufacturing Services (EMS) industry, offering innovative stress engineers delivering analysis solutions to the aerospace industry in the UK and Europe. With the growing manufacturing and supply chain solutions to world leading electronics and technology companies across a broad range trend towards out-sourcing of stress analysis work by the larger design and manufacturing companies, Inter-Tec of industries. From conceptual design through total product management, the company's design, manufacturing and Services remains the only company in Scotland fulfilling this particular demand within the sector. Inter-Tec is the post-manufacturing services are offered from facilities in the Americas, Europe and Asia. Jabil common stock is traded stress analysis provider within the AATGL Trading Group and also enjoys a close and mutually beneficial business on the New York Stock Exchange under the symbol “JBL”. relationship with BASE2000 in Belfast, with whom the company collaborates on certain major projects. Business type(s): Component, Equipment/Systems, Facilities, Platform, Services Business type(s): Facilities, Services Jefferies Quarterdeck Intheairnet Limited St James's House, 23 King Street, London. SW1Y 6QY United Kingdom Nova Building, Herschel Street, Slough, Berkshire. SL1 1XS United Kingdom Tel : +44 (0)20 7968 8000 Fax : +44 (0)20 7968 8080 Tel : +44 (0)1753 283300 Fax : +44 (0)1753 283301 [email protected] www. jefferies.com [email protected] www.intheairnet.com Jefferies Quarterdeck, a division of Jefferies & Company, Inc., is focused on providing a full range of investment banking Headquartered in Irvine CA, USA, Intheairnet LLC designs, manufactures and supports in-flight entertainment services exclusively to middle-market and growth companies in the global aerospace, defence, federal IT and homeland systems for a worldwide customer base, with systems and equipment flying on a wide range of airframes, including security sectors. Jefferies Quarterdeck combines deep industry knowledge and M&A expertise with Jefferies' head-of-state aircraft, as well as Air Force One. The company's end customers include most major aircraft outstanding debt and equity financing, restructuring, trading and research capabilities. modification and completion centres worldwide plus governments and airlines. The UK subsidiary, Intheairnet Business type(s): Services Limited, based in Slough, focuses on software design and new product development, as well as cabin management and entertainment system integration for VIP and large corporate aircraft. More information can be found at www. rogerson.com. Jesmond Engineering Limited Business type(s): Component, Equipment/Systems Jesmond House, Station Road, Brough, Cumbria. HU15 1DX United Kingdom Tel : +44 (0)1482 668583 [email protected] www. jesmondengineering.com

CAA Approved, OEM Approved

Jesmond Engineering Limited offers software solutions and a consulting service for aerospace and other high technology engineering companies. The company's main experience is in the fields of fatigue, fracture and static analysis of aerospace structural components. The specialised nature of these areas has often lead Jesmond Engineering to provide bespoke analysis and software, however, the company also provides off-the-shelf solutions. Business type(s): Component, Equipment/Systems, Facilities, Services

.34 .35 members' index Jonathan Lee Recruitment Limited Kembrey Wiring Systems Limited The Maltings, Mount Road, Stourbridge, West Midlands. DY8 1HZ Garrard Way, Greenbridge, Swindon, Wiltshire. SN3 3HY United Kingdom United Kingdom Tel : +44 (0)1793 693 361 Fax : +44 (0)1793 614 298 Tel : +44 (0)1384 397 555 Fax : +44 (0)1384 379 396 [email protected] www.kembrey.co.uk [email protected] www. jonlee.co.uk AS 9100 Jonathan Lee Recruitment has become a household name in permanent and contract aerospace recruitment. Founded in 1978 they now operate nationally from offices in Leeds, Leicester, Stourbridge, St Albans and Basildon Kembrey Wiring Systems Limited has played a major role in aircraft and aero-engine wiring systems since their origins and internationally through a network of overseas partners. Their Recruitment Consultants have industry within the Plessey organisation in 1954. With major current programmes including the Trent 1000 for Rolls-Royce, experience in engineering, manufacturing, purchasing, supply chain and sales and marketing up to senior management Nimrod MRA4 and Harrier GR9 Upgrade programmes for BAE SYSTEMS, Kembrey is uniquely placed in the UK market level enabling them to provide “solutions through understanding” into the aerospace industry. Key clients include and offers unrivalled capability in terms of build quality with minimal risk and cost of acquisition. Airbus, BAE Systems, Goodrich and Rolls Royce as well as smaller tier two suppliers and SMEs. Jonathan Lee also Business type(s): Component teamed up with the Carlisle Group to form the Alpha Consortium in order to become one of Smiths Aerospace’s (now GE Aviation Systems) major recruitment partners. Kidde Limited Business type(s): Services Mathisen Way, Colnbrook, Slough, Berkshire. SL3 0HB United Kingdom Jullip International Limited Tel : +44 (0)1753 683 245 Fax : +44 (0)1753 685 126 [email protected] www.kiddegraviner.com 258 Birmingham Road, Allesley Village, Coventry, West Midlands. CV5 9HD United Kingdom AS 9100, CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved, OEM Approved Tel : +44 (0)24 7627 4212 [email protected] www. ji-consult.com Kidde Graviner, located in Colnbrook, Berkshire, just minutes from London's , has for more than 60 years been at the forefront of the design, manufacture and supply of specialised fire protection and safety systems Jullip International Limited offers a comprehensive operations improvement service to industry that delivers to for the international civil and military aerospace and military vehicle markets. Kidde Graviner is part of the Kidde their customers bottom line improvements. Services cover three main areas of expertise: Consultancy - lean Aerospace and Defence group of companies comprising Kidde Aerospace, Fenwal Safety Systems, Kidde Dual Spectrum implementation, change management, aviation services and manufacturing engineering; Lean Training - value added based in the USA and L'Hotellier, located in France. and practical lean training and simulation programmes for industry; E-Kanban - a highly developed and easy to use software package that enables the company's customers to implement electronic Kanban systems along the Business type(s): Component, Equipment/Systems, Services complete supply chain fast and efficiently. Jullip International Limited helps companies' off-shore production into China and Vietnam. Kingston University Business type(s): Services Faculty of Engineering, Kingston University, Rm 207 Town House, Penrhyn Road, Kingston upon Thames, Surrey. KT1 2EE United Kingdom Kearsley Airways Limited Tel : +44 (0)20 8547 7831 Fax : +44 (0)20 8547 8844 Romeera House, Stansted Airport, Stansted, Essex. CM24 1QL United Kingdom www.kingston.ac.uk/enterprise Tel : +44 (0)1279 871 000 Fax : +44 (0)1279 871 187 JAR Approved www.kalair.co.uk Kingston University offers quality teaching and wide-ranging support in a vibrant and diverse university community. The CAA Approved, ISO 9002, JAR Approved University aims to be open and accessible to potential students of all ages, backgrounds and nationalities. Kingston University offers an intellectually challenging and culturally enriching environment to live and work in. Kearsley Airways Limited is one of the leading companies in the aerospace component repair sector for over 50 years and is continually investing in new technology, plant and equipment. Kearsley Airways Limited has a well Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services equipped 45,000 square feet engineering facility based at . The constant demand by operators is to reduce inventory and this places greater emphasis on faster component repair turnaround times. Knight Precision Wire Limited This can be achieved by operators, airlines or stockists entering into a sole sourcing agreement whereby Kearsley Airways Limited invests and maintains a large spares inventory to support customer requirements. Hadley Works, Cranborne Road Industrial Estate, Potters Bar, Hertfordshire. EN6 3JL United Kingdom Business type(s): Component, Equipment/Systems, Platform, Services Tel : +44 (0)1707 645 261 Fax : +44 (0)1707 649 225 [email protected] www.knight-precision-wire.co.uk

Knight Precision Wire Limited specialises in processing and stockholding of precision wire and tube in a comprehensive range of carbon spring, mild and stainless steels, copper and copper alloys, nickel and nickel alloys, titanium and special purpose alloys. Business type(s): Component, Materials

.36 .37 members' index KPMG UK Limited 8 Salisbury Square, Blackfriars, London. EC4Y 8BB United Kingdom Manning House, 22 Carlisle Place, London. SW1P 1JA Tel : +44 (0)20 7311 1000 Fax : +44 (0)207 311 4077 United Kingdom [email protected] www.kpmg.co.uk Tel : +44 (0)20 7798 2850 Fax : +44 (0)20 7798 2851 [email protected] www.lockheedmartin.co.uk KPMG is the global network of professional services firms of KPMG International. The company's member firms provide audit, tax and advisory services through industry-focused, talented professionals who deliver value for the UK Anticorruption Forum benefit of their clients, their people and the capital markets. With nearly 100,000 people worldwide, KPMG member firms provide audit, tax, and advisory services from 715 cities in 148 countries. The company has recent experience Lockheed Martin UK, a unit of Lockheed Martin Corporation, is a leader in systems integration working on major of advising airport clients on airport privatisations, private sector acquisitions, and asset financing, as well as on programmes spanning the aerospace, defence, civil and commercial sectors. Lockheed Martin works with over 100 issues such as IT security. business partners and employs over 1,500 people at 15 sites across the UK. Headquartered in Bethesda, MD, Lockheed Martin employs about 135,000 people worldwide and is principally engaged in the research, design, development, Business type(s): Services manufacture and integration of advanced technology systems, products and services. Business type(s): Equipment/Systems, Services Leach International UK Limited 259 Forstal Road, Avlesford, Kent. ME20 7AQ United Kingdom Magellan Aerospace (UK) Limited Tel : +44 (0)1622 790 322 1 West Point Row, Great Park Road, Bradley Stoke, Bristol, Avon. BS32 4QG United Kingdom [email protected] www.leachintl.com Tel : +44 (0)1454 453 550 Fax : +44 (0)1454 453 599 AS 9100 [email protected] www.magellanuk.aero

Leach International applies its design, engineering and manufacturing expertise to create solutions-oriented AS 9100, Customer Approved equipment for power distribution and control. These products, featuring quality Leach components housed in customer-selected assemblies, provide a new level of added-value service. Whether designing to a requirement, a Magellan Aerospace (UK) Limited is a leading design to manufacture supplier of aerospace structural components specification or a replacement, or building to a print requirement, Leach can provide lower cost, lighter weight and and assemblies. A Tier One supplier, the division has a highly integrated design and manufacturing capability that can more reliable solutions. Known for its design excellence and commitment to quality and reliability since 1919, Leach provide a diverse service of detail kit supply through to class one structural sub assembly. Testing and proving of the equipment and components are used on thousands of aerospace, military, rail, and high-end industrial applications certified products commences with stress and fatigue analysis of the design and continues with NDT and protective worldwide in the most severe environments. finishing to customer specification at the end of the production cycle. Product sizes range from small intricate valves and continue up to single one piece spars exceeding 18 metres length, assembled and delivered to point of use. Business type(s): Component Business type(s): Component, Facilities, Materials, Platform, Services

Linread Northbridge Magnesium Elektron PO Box 28, Crossgate Road, Park Farm Industrial Estate, Redditch, Worcestershire. B98 7TD United Kingdom PO Box 23, Rake Lane, Swinton, Manchester, Lancashire. M27 8DD United Kingdom Tel : +44 (0)1527 525 719 Fax : +44 (0)1527 526 881 Tel : +44 (0)161 911 1000 Fax : +44 (0)161 911 1020 [email protected] www.linreadnorthbridge.com [email protected] www.magnesium-elektron.com

AS 9100, BS EN ISO 14001:2004, ISO 9002, NADCAP, OEM Approved AS 9100

A member of the McKechnie Aerospace Fasteners Group, Linread Northbridge boasts the shortest, most reliable Magnesium Elektron specialises in the development, production and supply of lightweight magnesium alloys for lead-times in Europe. Capabilities include extensive design, development, test, manufacture and distribution of a foundries worldwide. ELEKTRON magnesium alloys have been used successfully in aerospace, automotive and defence wide portfolio of aerospace components and fasteners. The business supports original equipment manufacturers components for many years. The latest development, ELEKTRON 21 is a high performance casting alloy combining such as Airbus, BAE Systems, EADS, Rolls-Royce, Pratt & Whitney, GEAE and GKN Westland as well as airlines and excellent mechanical properties with good corrosion resistance and castability. Two thirds the weight of an aluminium aircraft operators in the aftermarket. The company specialises in airframe fasteners to international, national alloy, it offers an attractive lightweight solution to designers. and customer specifications that it can deliver through tailored, single-sourced, dedicated inventory management Business type(s): Facilities, Materials systems. Business type(s): Component

.38 .39 members' index Maher Limited (Superalloys) MB Faber Limited 2 Brightside Way, Sheffield, Yorkshire (South). S9 2RQ United Kingdom Golden Hill Centre, School Lane, Leyland, Preston, Lancashire. PR25 2TU United Kingdom Tel : +44 (0)114 290 9200 Fax : +44 (0)114 290 9290 Tel : +44 (0)1772 622 200 Fax : +44 (0)1772 622 455 [email protected] www.maher.co.uk [email protected] www.mbfaber.co.uk

AS 9100, AS/EN9100, CAA Approved, ISO 9002 MB Faber Limited is an internationally respected project organisation, backed with an extensive multi-skilled, engineering design and supply capability. A prime supplier, whose client base extends through a variety of sectors Maher Limited is an international supplier of nickel base superalloys, titanium, vacuum melted stainless and maraging including aerospace, nuclear, automotive, general engineering industries. MB Faber's expertise covers mechanical steels and copper alloys in bar and plate, wire and forgings. Maher offers in-house cutting, heat treatment, testing handling equipment, jig and tool design, manufacture and production engineering support, process control and and CNC machining facilities. Industries served worldwide include aerospace, defence, power generation, motorsport, automation. oil and gas, marine, petrochemical and electronics. Typical applications are pumps and valves, composite tooling, fasteners, lasers and fibre optics. Business type(s): Facilities Business type(s): Facilities, Materials, Services McBraida Plc Marshall of Cambridge Aerospace Limited Bridgeyate, Warmley, Bristol, Avon. BS30 5JW United Kingdom Airport House, The Airport, Newmarket Road, Cambridge, Cambridgeshire. CB5 8RX United Kingdom Tel : +44 (0)117 9613 103 Fax : +44 (0)117 960 1417 [email protected] www.mcbraida.com Tel : +44 (0)1223 373 737 Fax : +44 (0)1223 373 604 [email protected] www.marshallaerospace.com AS 9100, CAA Approved, ISO 9002, NATO/MoD Approved, OEM Approved

CAA Approved, ISO 9001, ISO 9002, JAR Approved, NATO/MoD Approved, OEM Approved, McBraida plc provides a precision engineering service to high technology industries. Since 1954 McBraida has achieved UK Anticorruption Forum steady growth and the resulting stability has ensured continuing independence. A policy of sound investment and the development of new technologies has been complimented by an enduring commitment to quality and technical Marshall Aerospace is one of the UK's leading aerospace contractors with a worldwide reputation for reliability, excellence. McBraida plc holds quality approvals for most of the UK aerospace companies along with ISO 9000, AS9100 quality and excellence. It owns and operates Cambridge City Airport where the company is involved in the design, and the UK Standard Operating Procedure (formerly SBAC TS157). maintenance, manufacture, conversion, modification and logistic support of a wide range of civil and military aircraft. The airport is approved by the MoD and holds a public use license, is also a Cessna Service Station and holds Business type(s): Facilities ISO 9002 accreditation and CAA, FAA, JAR Approvals for Boeing, BAES, and Lockheed products. Marshall Aviation Services: providing support services to airports including:- aircraft engineering and pilot training; airfield and flight PLC operations; airport management and operations; air traffic control, training and engineering; aviation security; fire fighting and emergency services; fuel management; ground and passenger handling and meteorology. Atlantic House, Aviation Park West, Bournemouth International Airport, Christchurch, Dorset. BH23 6EW United Kingdom Business type(s): Component, Equipment/Systems, Facilities, Materials, Services Tel : +44 (0)1202 597 597 Fax : +44 (0)1202 597 555 Martin-Baker Aircraft Company Limited [email protected] www.meggitt.com AS/EN9100, AS/EN9110, AS9120, BS EN ISO 14001:2004, BS EN ISO 9001:2000, CAA Approved, Lower Road, Higher Denham, Nr Uxbridge, Middlesex. UB9 5AJ United Kingdom Customer Approved, EASA Approved, ISO 14001, ISO 9001, ISO 9002, JAR Approved, NATO/MoD Approved, Tel : +44 (0)1895 832 214 Fax : +44 (0)1895 835 633 OEM Approved, UK Anticorruption Forum [email protected] www.martin-baker.com The Meggitt group designs and makes high performance components and systems for aerospace and defence but AS 9100, CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved, OEM Approved applies its core sensing and controls technologies to land and marine-based gas turbines and the medical, mainstream industrial, test engineering and transportation sectors. Meggitt’s aerospace equipment businesses include wheels and Martin-Baker is the world's longest established and most experienced manufacturer of ejection seats and related brakes and anti-skid systems, thermal management systems (environmental control and ice protection), fluid control equipment to safeguard the aviator throughout the escape, survival, location and recovery phases. It is the only products, fire, overheat and smoke detection and polymer and composite seals. Its sensing systems businesses cover company that can offer a fully integrated escape system that satisfies the very latest in pilot operational capability aerospace and industrial condition-monitoring, high-performance sensing and avionics. The group’s defence systems and safety standards offering a complete 'end-to-end service' from helping the customer to establish operational businesses cover training systems (live and virtual fire) and combat support (ammunition-handling, environmental safety and escape requirements, design, development and qualification, to ongoing support throughout the entire control and countermeasure launch and recovery). service life of the aircraft. Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services Business type(s): Component, Equipment/Systems

.40 .41 members' index MEP Limited Metallics Limited Unit BB, St Michaels Close, The Forstal Estate, Aylesford, Kent. ME20 7BU United Kingdom Unit 7 Sparkbrook Workshops, Sparkbrook Street, Coventry, West Midlands. CV1 5ST United Kingdom Tel : +44 (0)1622 718 642 Fax : +44 (0)1622 882 130 Tel : +44 (0)2476 633 229 Fax : +44 (0)2476 633 229 [email protected] www.mep.co.uk [email protected]

BS EN ISO 9001:2000 AS/EN9100, BS EN ISO 9001:2000

Founded in 1972, MEP Limited is a leading provider of quality moulding, machining and fabrication solutions within a Metallics Limited is a company that specialises in electroplating/metal finishing for the aerospace, defence and wide range of industry sectors, both within the UK and abroad. Our capabilities include:- Thermoset Compression Formula One sectors. Processes include silver, copper, dull nickel, electroless nickel, tin and gold plating, also passivation moulding; Thermoset Transfer moulding; hand lay up moulding; Thermoplastic injection moulding; manual machining of stainless steel and chemical black of copper and its alloys. Quality Approvals include AS/EN9100, of metal, plastic and reinforced composite components; CNC machining of metal, plastic and reinforced composite BS EN ISO 9001:2000, AS9104 and various customer approvals. components; fabrication and sub-assemblies. As we have both comprehensive moulding and machining facilities, it Business type(s): Facilities, Materials enables us to give a non-biased approach to achieve the very best manufacturing method and product performance from one single supply point. Accredited to BS EN ISO 9001:2000 and an Investor in People organisation, we invest heavily in plant, equipment, facilities and people to ensure we continually offer customers the most advanced Mettis Aerospace Limited technology and techniques to meet quality, cost and delivery objectives. Windsor Road, Redditch, Worcestershire. B97 6EF United Kingdom Business type(s): Facilities, Services Tel : +44 (0)1527 406 400 Fax : +44 (0)1527 406 401 [email protected] www.mettis-aerospace.com Messier Dowty Limited AS 9100, CAA Approved, ISO 14001, ISO 9001 Cheltenham Road East, Gloucester, Gloucestershire. GL2 9QH United Kingdom Mettis Aerospace is a leading service provider of aerospace components based upon world leading forging, machining and metallurgical skills. Mettis Aerospace has a comprehensive range of design, logistics, forging, machining, processing Tel : +44 (0)1452 712 424 Fax : +44 (0)1452 713 821 and kitting services all on one site. Investment in technology has created Mettis aerofoils, forging, and machining www.messier-dowty.com centres of excellence, where over 100 years of experience is coupled with customer-focused techniques to produce AS 9100, CAA Approved, ISO 9001, ISO 9002, JAR Approved, NATO/MoD Approved precision components of the highest quality for these demanding markets. Business type(s): Component, Facilities Messier Dowty, a SAFRAN Group company, is the world's leader in the design, development, manufacture and support of landing gear systems. Messier Dowty's landing gear is in service on more than 19,000 aircraft making over 30,000 landings every day. The company supplies 30 airframe manufacturers and supports 750 operators of Microfiltrex - a Division of Porvair Filtration Group Limited large commercial aircraft, regional and business aircraft, military aircraft and helicopters. Messier Dowty is also Fareham Industrial Park, Fareham, Hampshire. PO16 8XG United Kingdom the majority shareholder of the worldwide MRO network, Messier Services. Messier Dowty and Messier Services together have 4,000 employees across sites in Europe, North America and Asia, and posted consolidated sales of Tel : +44 (0)1329 285 616 Fax : +44 (0)1329 822 442 roughly 720 million Euros in 2004. [email protected] www.porvairfiltration.com

Business type(s): Equipment/Systems CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved

Microfiltrex designs and manufactures specialist filtration components and assemblies to meet the high technology Messier Services United Kingdom challenges of aerospace and defence industries for contamination control in hydraulic, fuel, lubrication, water Meteor Business Park, Cheltenham Road, Gloucester, Gloucestershire. GL2 9QL United Kingdom and air systems. Microfiltrex's filters protect vital sub-systems such as flight controls, fuel management, thrust reversers, braking and steering, power generation and air intakes in aircraft, helicopters, military vehicles, missiles Tel : +44 (0)1452 713 111 Fax : +44 (0)1452 716601 and spacecraft. A wide range of filter media are available including polymeric, glass fibre and sintered metal fibre [email protected] www.messierservices.com with typical absolute filtration ratings from 5 to 25 microns. These elements can be cleanable or disposable and their AS 9100 Sinterflo® metal media offer unparalleled performance to withstand all application pressures and temperatures. Business type(s): Component, Equipment/Systems, Platform, Services As part of a global network backed by the Safran Group, Messier Services UK specialises in the repair and overhaul of landing gears and assembly hydraulic units for military and regional aircraft throughout Europe, Asia and USA and is Messier Services Group’s European landing gear centre of excellence for A318, A319, A320 and A321. To meet the Moog Controls Limited needs of an intensely competitive market, Messier Services UK has access to an extensive exchange/lease rotable Ashchurch, Tewkesbury, Gloucestershire. GL20 8NA United Kingdom pool to provide responsible service packages. Business type(s): Services Tel : +44 (0)1684 296 600 Fax : +44 (0)1684 296 760 [email protected] www.moog.com

AS/EN9100, BS EN ISO 9001:2000, CAA Approved, Customer Approved, EASA Approved

Moog is a worldwide manufacturer of precision control components and systems. Moog's high performance actuation products control military and commercial aircraft, satellites and space vehicles, launch vehicles, missiles and automated industrial machinery. Business type(s): Equipment/Systems, Platform, Services .42 .43 members' index MSM Group Nederman Limited Spring Vale Works, Middleton, Manchester, Lancashire. M24 2HS United Kingdom PO Box 503, 91 Walton Summit, Bamber Bridge, Preston, Lancashire. PR5 8AF United Kingdom Tel : +44 (0)161 643 2462 Fax : +44 (0)161 643 3490 Tel : +44 (0)1772 332 123 Fax : +44 (0)1772 315 273 [email protected] www.msmgroup.org [email protected] www.nederman.co.uk

AS 9100, AS/EN9100, CAA Approved, JAR Approved, NADCAP, OEM Approved Nederman has been at the forefront for over 60 years creating better working environments throughout UK Industry by removing hazards to health and safety. Nederman is the world leader in dust and fume extraction, exhaust MSM specialises in the manufacture and repair of complex aerospace fabrications. Key processes are fluid forming, extraction systems, hose reels and personal protection equipment. The company also supplies aftermarket service, 5 axis laser profiling, TiG and resistance welding and brazing and CNC pipebending. Our experienced staff operate installation and maintenance including LEV testing. Nederman supplies high standard manufacturing with the overriding proactively and thrive on problem solving and developing intelligent manufacturing techniques. MSM has total in- aim of improving the industrial/manufacturing workspace for the benefit of employers and their employees. house abilities in duct manufacture. Business type(s): Equipment/Systems, Facilities, Services Business type(s): Facilities, Services

M-Tec Recruitment Limited Newcastle College School of Technology, Rye Hill Campus, Scotswood Road, Newcastle upon Tyne, Tyne & Wear. 50-54 St Pauls Square, Birmingham, West Midlands. B3 1QS United Kingdom NE4 7SA United Kingdom Tel : +44 (0)121 693 3540 Fax : +44 (0)121 693 2167 Tel : +44 (0)191 200 4422 Fax : +44 (0)191 200 4517 [email protected] www.m-teceng.com [email protected] www.newcastlecollege.co.uk

M-Tec Recruitment Limited is one of the UK’s leading suppliers of permanent, contract and consultancy recruitment Newcastle College of Technology is a ‘Centre of Vocational Excellence (CoVE) in ‘Aerospace and Allied Engineering solutions to the automotive, general engineering and aerospace sectors. With over 10 years recruitment experience, Technologies’. The College has been recognised by the Learning and Skills Council (LSC) and the Department for M-Tec's success is driven by a highly focused team of knowledge based individuals that have both industry exposure Education and Skills (DfES) as a provider of excellence in all aspects of aerospace and allied engineering training and a hands-on approach to client and candidate management. including teaching and learning, standards of resources, progression routes and quality procedures. Business type(s): Services Business type(s): Services

Muirhead Aerospace Nicholsons Sealing Technologies Limited 33 Oakfield Road, Penge, London. SE20 8EW United Kingdom Amos Drive, Greencroft Industrial Park, Stanley, Durham. DH9 7YE United Kingdom Tel : +44 (0)20 8659 9090 Fax : +44 (0)20 8571 2336 Tel : +44 (0)1207 523 010 Fax : +44 (0)1207 523 011 [email protected] www.muirheadaerospace.com [email protected] www.nicholsons.co.uk

AS 9100, CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved, OEM Approved AS 9100, ISO 9002

Muirhead Aerospace at Penge: Muirhead Aerospace's extensive capability in the design and manufacture of motion Nicholsons Sealing Technologies are the UK specialists in the design and manufacture of high temperature metal seals, technology products meets the requirements of today's state-of-the-art aerospace and defence programmes. gaskets and ancillary components for the aerospace, automotive and industrial sectors. Their extensive range of metal Every Muirhead product has been designed, engineered and manufactured by in-house teams. The products undergo sealing products for applications within the automotive, offshore, original equipment and process industries are used rigorous testing and can withstand harsh environmental conditions including fuel or hydraulic fluid immersion, worldwide. With over 80 years experience of metal seal design and production allied to leading-edge technology and a temperature extremes and high vibration. The company was founded in 1896 and joined Esterline Technologies in highly skilled workforce, Nicholsons provide quality components and service to their customers. 1999. Muirhead Aerospace at Andover: Muirhead Aerospace at Andover provides the high technology industrial market sector with a similar range of custom designed products to Muirhead Aerospace at Penge. Applications Business type(s): Facilities, Platform include robotics, process control, space technology, marine navigation, offshore exploration and high vacuum engineering. Andover is also the Design Centre for all new Muirhead products. Nikken Kosakusho Europe Limited Business type(s): Equipment/Systems, Services Precision House, Mangham Way, Barbot Hall Industrial Estate, Rotherham, Yorkshire (South). S61 4RL United Kingdom Mussett Engineering Limited Tel : +44 (0)1709 366 306 Fax : +44 (0)1709 376 683 Lodden Industrial Estate, Lodden, Norwich, Norfolk. NR14 6JD United Kingdom [email protected] www.nikken-world.com

Tel : +44 (0)1508 522 500 Fax : +44 (0)1508 528 769 Nikken Kosakusho Europe Limited is a supplier of Precision toolholders, CNC rotary tables, presetters and attachments [email protected] www.mussett.co.uk for machine tools, used in aerospace, automotive and precision engineering. The Nikken Euro-centre is based in Rotherham and sells, distributes and supports its products throughout the UK and Europe to customers, subsidiaries AS 9100, ISO 9002 and distributors in more than 20 countries. Mussett Engineering Limited are manufacturers of high quality precision components for the aerospace, automotive, Business type(s): Facilities petro-chemical and medical/scientific sectors. Extensive CNC machining capabilities, turning and milling, with wire and spark eroding and grinding capabilities. In conjunction with the continuous investment programme Mussett Engineering has the quality accreditations to support their dedication towards total customer satisfaction. Business type(s): Facilities .44 .45 members' index Northrop Grumman UK Page Aerospace Limited 16 Charles II Street, London. SW1Y 4QU United Kingdom Page Works, Forge Lane, Sunbury on Thames, Middlesex. TW16 6EQ United Kingdom Tel : +44 (0)207 930 4173 Fax : +44 (0)207 930 7418 Tel : +44 (0)1932 787 661 Fax : +44 (0)1932 780 349 www.northropgrumman.co.uk [email protected] www.pageaerospace.com

Northrop Grumman Corporation is a global defence company that provides a broad array of technologically AS 9100, CAA Approved, ISO 9001, JAR Approved, OEM Approved advanced, innovative products, services and solutions in systems integration, defence electronics, information technology, advanced aircraft, shipbuilding and space technology. With headquarters in Los Angeles, California, the The Page Group is one of the largest manufacturers of electronic cabin power and lighting products in the world company has annual revenues in excess of $30billion and more than 125,000 employees operating in 25 countries and one of the three largest in Europe. The group has operations in Sunbury (UK), Bremen (Germany), Rambouillet serving US and international military, government and commercial customers. In the UK, the company operates (France) and Seattle (US). Established in 1942 as a leading design and manufacturing company for avionic equipment, from five primary locations, Southampton, New Malden, Peterborough, Coventry and Solihull and provides avionics, Page Aerospace Limited has comprehensive in-house facilities that cater for research, design, development, precision communications, electronic warfare systems, marine navigation systems, robotics, IT systems and software manufacture, qualification test and certification of electronic and electro-mechanical systems for the aerospace development. Northrop Grumman established a corporate office in London in early 2006 to serve its UK customer industry. Page's principal products are cabin lighting, power conversion and electro-mechanical controls. base and grow its international business. Principal customers are the MoD and the Home Office. Business type(s): Component, Equipment/Systems Business type(s): Component, Equipment/Systems, Platform, Services Parametric Technology (UK) Limited Odgers Ray & Berndtson Innovation House, Harvest Crescent, Fleet, Hampshire. GU51 2QR United Kingdom Manchester International Office Centre, Styal Road, Manchester. M22 5WB United Kingdom Tel : +44 (0)1252 817 600 Fax : +44 (0)1252 810 722 Tel : +44 (0)161 498 3400 Fax : +44 (0)161 498 3401 [email protected] www.ptc.com [email protected] www.odgers.com PTC is helping the world’s best companies to optimise product development. As a leading supplier of Product Lifecycle Odgers Ray & Berndtson was established more than 40 years ago and was acquired by the present management Management and Enterprise Content Management solutions for over 40,000 companies of all sizes, PTC enables in 1998. It has grown both organically and acquisitively to become the UK’s number one search firm in July 2006 manufacturing, services, publishing, and government organisations to optimise the development of physical and (Executive Grapevine 2006). The company now has a turnover of £40 million in the UK and Ray & Berndtson is the information products. With the combination of their market-leading Product Development System and their 20 years sixth largest firm globally with an estimated global fee income of $220m. In the UK, the company has developed a of product development process knowledge, PTC customers are winning by improving their time-to-market, quality and network of offices; two in London and one in Manchester, Aberdeen, Birmingham, Cardiff, Glasgow and Leeds. Odgers productivity. Ray & Berndtson has over 140 fee earning consultants and a total staff complement of 350. Key contacts include: Business type(s): Services Bernard Perry, Partner & Head of Aerospace & Defence +44 7767 253370; Adam Fairbrother, Principal Aerospace & Defence +44 7778 144029; Susan Thompson, Partner Air Transport Practice +44 7764 344833. Parker Hannifin Limited Business type(s): Services 2510 The Quadrant, Aztec West, Almondsbury, Bristol, Avon. BS32 4TW United Kingdom Optimised Operations Limited Tel : +44 (0)1454 643321 Fax : +44 (0)1454 643311 [email protected] www.parker.com Old School House, School Lane, Streton-on-Dumsmore (near Rugby), Warwickshire. CV23 9ND United Kingdom The Parker Company was first founded in 1918 and first supplied to the aerospace industry in 1924 – Charles Lindbergh’s transatlantic flight. Currently Parker Hannifin Corporation employs some 50,000 worldwide with an annual Tel : +44 (0)24 7654 3343 Fax : +44 (0)24 7654 3343 turnover in excess of $8B as a diversified manufacturer of motion and control technologies and systems. Parker [email protected] www.optimisedoperations.com Hannifin Limited (the European Headquarters) is located in Hemel Hempstead, Hertfordshire, in the United Kingdom. The Optimised Operations Limited was established in 2001 and is a management consultancy which specialises in Aerospace Group has manufacturing facilities in Mainz Kastel, Germany and support offices in Toulouse, France. In the releasing cash from a company's operations, either through operations improvement, restructuring or cost UK there are design offices and test facilities in Bristol and design and support offices in Coventry. avoidance programmes. Business type(s): Component, Equipment/Systems, Platform, Services Business type(s): Services Pascall Electronics Limited Pacific Scientific Limited Westridge Business Park, Cothey Way, Ryde, Isle of Wight. PO33 12T United Kingdom 8 Boston Drive, Bourne End, Buckinghamshire. SL8 5YS United Kingdom Tel : +44 (0)1983 817 300 Fax : +44 (0)1983 564 708 Tel : +44 (0)1628 682 200 Fax : +44 (0)1628 682 250 [email protected] www.pascall.co.uk [email protected] www.pacificscientific.com Pascall Electronics Limited designs and manufactures RF components, systems and sub-systems to 18GHz. AC/DC & ISO 9002, JAR Approved DC/DC power products including the space saving single slot unit and databus transformers. The company's standard range of products should be seen as a capability range rather than an absolute catalogue entry. Pascall Electronics Pacific Scientific Aerospace & Defence Group is an industry leader in the design, development and production of pride themselves on their ability to change designs to suit particular applications rather than the customer changing aviation safety equipment for commercial, military and general aviation industries. Comprised of 9 divisions with his requirements to suit what is available. locations throughout North and South America, Europe and Asia, the Group is dedicated to providing the highest Business type(s): Component, Equipment/Systems quality and most reliable aviation safety equipment and services in the world. Business type(s): Equipment/Systems .46 .47 members' index Pattonair Praxis High Integrity Systems Limited Kingswey Business Park, Forsyth Road, Sheerwater, Woking, Surrey. GU21 5SA United Kingdom 20 Manvers Street, Bath, Avon. BA1 1PX United Kingdom Tel : +44 (0)1483 774 600 Fax : +44 (0)1483 774 619 Tel : +44 (0)1225 466 991 Fax : +44 (0)1225 469 006 [email protected] www.pattonair.com [email protected] www.praxis-his.com

AS 9100, AS/EN9120, CAA Approved, ISO 9002, OEM Approved Praxis is a systems engineering company specialising in safety, and mission critical applications. Praxis leads the world in specific areas of advanced systems engineering, specifically: ultra low defect software engineering, safety Pattonair was established in 1970 and has grown to become a leading global distributor of hardware, seals and engineering for complex or novel systems and tools/methods for systems engineering. Praxis offers clients a range of miscellaneous components, with premises located throughout Europe, North America and Asia. The company offers services including turn-key systems development, consultancy, training and R&D. The company operates internationally three value propositions, Direct, Solutions and Partner supporting customers across the globe. with active projects in the US, Asia and Europe. UK offices include London and Bath. It is wholly owned by Altran Business type(s): Component, Services Technologies which is a global leader in innovation engineering and employs 16,000 engineers across the world. Business type(s): Services Poeton Industries Limited Eastern Avenue, Gloucester, Gloucestershire. GL4 3DN PricewaterhouseCoopers LLP United Kingdom 1 Embankment Place, London. WC2N 6RH United Kingdom Tel : +44 (0)1452 300 500 Fax : +44 (0)1452 500 400 Tel : +44 (0)207 583 5000 Fax : +44 (0)207 804 4907 [email protected] www.poeton.co.uk www.pwc.com/uk

BS EN ISO 14001:2004, ISO 9001, NADCAP PricewaterhouseCoopers provides industry-focused assurance, tax and advisory services for public and private clients. Poeton are world leaders in providing surface engineering coatings and treatments to resist wear, friction and More than 130,000 people in 148 countries connect their thinking, experience and solutions to build public trust and corrosion. Specialising in electroplating, anodising, electroless nickel, thermal spray and polymer coatings, we offer enhance value for clients and their stakeholders. a worldwide service to all major industrial sectors. We have comprehensive R & D facilities for new coatings and Business type(s): Services applications, are BS EN ISO 9001:2000, 14001 and NADCAP approved and hold full approvals to process for some of the world's most renowned companies. Prodrive Limited Business type(s): Facilities, Materials Acorn Way, Banbury, Oxfordshire. OX16 3ER United Kingdom Polamco Limited Tel : +44 (0)1295 273 355 Fax : +44 (0)1295 271 188 [email protected] www.prodrive.com Weston Lock, Lower Bristol Road, Bath, Avon. BA2 1EP United Kingdom ISO 9001, ISO 9002, NATO/MoD Approved, Testing & Certification Tel : +44 (0)1225 322 500 Fax : +44 (0)1225 425 940 [email protected] www.polamco.com Prodrive is the world’s leading independent motorsport and automotive technology business. During the last two decades Prodrive has won international races and rallies across the world and is currently responsible for the design, ISO 9001, UK Anticorruption Forum engineering and manufacture of the Subaru World Rally Car and the DBR9 race car at its Banbury Polamco Limited, based in Bath, is a dynamic company with a well earned reputation for producing high precision headquarters. The processes and techniques Prodrive employs to manufacture the parts and systems for these components for a host of demanding customers in a variety of industries. Polamco has a modern, highly specialised competition cars is something it now offers to businesses in the aerospace sector. Prodrive is used to computerised machine shop producing components and assemblies of the highest quality for customers throughout working to strict budgets, tight timescales and constantly applying innovative ideas to deliver results. Prodrive offers the world. Constant investment in the latest technology has provided a sophisticated manufacturing facility the aerospace industry its own dedicated composite operation, comprehensive CNC machining and fabrication, and in- which includes CNC multi-axis lathes and machining centres. The Polamco design department can provide product house electrical and electronic facilities. This is backed by design and planning operations. design drawings within hours of receiving an inquiry. Polamco has maintained its core business in the design and Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services manufacture of backshells adapters for all known styles of circular and rectangular connectors. Business type(s): Component, Facilities QinetiQ Group PLC PPG Aerospace, PRC-DeSoto Limited Malvern Technology Centre, St Andrews Road, Malvern, Worcestershire. WR14 3PS United Kingdom Tel : +44 (0)8700 100 942 Fax : +44 (0)1684 897 242 Darlington Road, Shildon, Durham. DL4 2QP United Kingdom www.QinetiQ.aero Tel : +44 (0)1388 772 541 Fax : +44 (0)1388 774 541 UK Anticorruption Forum [email protected] www.ppg.com QinetiQ is one of the UK’s leading Defence and Security Technology companies. With 9,000 staff in the UK and further AS 9100, ISO 9001, NATO/MoD Approved, OEM Approved interests in North America, QinetiQ’s portfolio of airport products and services includes: the Tarsier Runway Debris Established in 1883, PPG Industries is a leading diversified manufacturer that supplies its products and services Monitoring System; ZephIR Lidar for wind shear measurements; Quadrant ADS-B/multilatteration system; millimetre- around the world. PPG makes protective and decorative coatings, sealants, adhesives, metal pre-treatment wave passenger scanning; expertise in all aspects of ATM and human sciences for staff selection and training. products, performance glazing, fabricated glass products, continuous-strand fibre glass products, and industrial and specialty chemicals, including photo chromic ophthalmic lenses, optical monomers, silicas and fine chemicals. Business type(s): Materials .48 .49 members' index Quicksource On-Line Limited Rockford Components Limited Unit 1 Evans Business Centre, Monksbridge Road, Dinnington, Yorkshire (South). S25 3QS Rockford House, Acer Road, Rendlesham, Woodbridge, Suffolk. IP12 2GJ United Kingdom United Kingdom Tel : +44 (0)1394 420 800 Fax : +44 (0)1394 420 820 Tel : +44 (0)1909 517 107 Fax : +44 (0)1909 517 105 [email protected] www.rockford.co.uk [email protected] www.quicksource-online.com ISO 9001 ISO 9001, OEM Approved Rockford Components Limited is the UK's largest independent manufacturer of military wiring harnesses and cable Quicksource On-Line Limited provides material procurement, supported by an international network of suppliers assemblies. Rockford Components Limited cable assembly and specialist wiring workshops are complemented by its including OEMs and Distributors. In partnership with and on behalf of companies selling surplus inventory through quality sheet metal fabricating business and in-house finishing facility to offer a complete assembly service, from their website, the company has many thousands of parts and material available from stock located worldwide. ISO9001 design to complete system build, manufactured and tested to defence standards. The company is a recognised Quicksource can also manage surplus stock sales to release any slow moving inventory. military connector distributor and is franchised to both AB Connectors and Deutsch Limited, as well as stocking a vast Business type(s): Component, Equipment/Systems, Materials, Platform, Services range of connectors from QPL sources. Business type(s): Component, Equipment/Systems Raytheon Systems Limited 80 Park Lane, London. W1K 7TR United Kingdom Rockwell Collins UK Limited Tel : +44 (0)20 7569 5500 Fax : +44 (0)20 7569 5596 Suttons Business Park, Reading, Berkshire. RG6 1LA United Kingdom [email protected] www.raytheon.co.uk Tel : +44 (0)118 926 1111 Fax : +44 (0)118 966 4016 [email protected] www.rockwellcollins.com CAA Approved, ISO 9001, NATO/MoD Approved AS/EN9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000 Raytheon Systems Limited has a strong indigenous design and manufacturing capability, providing innovative solutions in areas of high technology. It supplies a diverse range of systems, products and services to home and overseas Rockwell Collins (UK) Ltd has been established for over 50 years, offering a comprehensive range of aviation electronics defence markets, drawing on the total capability of Raytheon worldwide. RSL is a First Tier supplier to the MoD and as and communications solutions to both commercial and government customers. Rockwell Collins (UK) employs a staff prime has won programmes such as ASTOR, SIFF, PGB and JETTS. RSL is also a key supplier of Air Traffic Management of 415 and is a wholly owned subsidiary of Rockwell Collins, Inc., an organisation with more than 17,500 employees systems for commercial and military air traffic control, anti-jam GPS navigation systems and IFF systems. worldwide. Business type(s): Equipment/Systems, Services Business type(s): Equipment/Systems, Facilities

RFD Beaufort Limited Roke Manor Research Limited Beaufort Road, Birkenhead, Merseyside. L41 1HQ United Kingdom Roke Manor, Old Salisbury Lane, Romsey, Hampshire. SO51 0ZN United Kingdom Tel : +44 (0)151 670 9009 Fax : +44 (0)151 653 6639 Tel : +44 (0)1794 833 000 Fax : +44 (0)1794 833 433 [email protected] www.rfdbeaufort.com [email protected] www.roke.co.uk

CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved, OEM Approved Roke Manor Research undertakes research and development in both the military and civil domains, in the areas of electronic communications, networks and sensors. RFD Beaufort, part of the Survitec Group of companies, was borne through the merger of RFD Limited and Beaufort Air Sea Equipment Limited in April 2003. While RFD Beaufort is a new entity, it has started life with a proud Business type(s): Equipment/Systems, Services and prestigious history of leadership and innovation in the safety and survival equipment industry. RFD Beaufort operates from two sites in the UK, the Dunmurry site (formerly RFD Limited) and the Birkenhead site (formerly Rolled Alloys Beaufort Air Sea Equipment Limited). Walker Industrial Park, Guide, Blackburn, Lancashire. BB1 2QF United Kingdom Business type(s): Equipment/Systems Tel : +44 (0)1254 582 999 Fax : +44 (0)1254 582 666 RLC Engineering Group Limited [email protected] www.rolledalloys.com AS 9100, CAA Approved, ISO 9002, NADCAP Ronaldsway Aircraft Building, Ballasalla, Isle of Man. IM9 2RY United Kingdom Tel : +44 (0)1282 688 500 Fax : +44 (0)1282 688 501 Rolled Alloys is a major material supplier specialising in nickel alloys, stainless and titanium in sheet, plate bar and [email protected] www.rlc-group.com welding wire. In-house added value capabilities include laser, waterjet and plasma cutting, cold-sawing, shearing and CNC machining. The company holds all major Quality Approvals including Nadcap and AS 9100 Rev B. AS 9100, ISO 14001, ISO 9001 Business type(s): Materials, Services RLC Engineering Group (RLC) is a world class provider of components and services to the aerospace industry. Founded in 1955 and headquartered in the Isle of Man, the Group is still privately owned. With sales in excess of £70M, and over 700 employees, the Group provides manufacturing, supply chain management and project management capabilities to some of the best known Primes in the aerospace sector including Martin Baker, Rolls-Royce, Airbus, BAe, Goodrich Corporation and Pratt and Whitney. RLC Engineering Group operates from three sites in the Isle of Man, Northern Ireland and Lancashire in the United Kingdom. .50 Business type(s): Facilities, Services .51 members' index Rolls-Royce PLC 65 Buckingham Gate, London. SW1E 6AT United Kingdom Tel : +44 (0)20 7222 9020 Fax : +44 (0)20 72279170 www.rolls-royce.com

Rolls-Royce is a global business providing power systems for use on land, at sea and in the air. The Group has a balanced business portfolio with leading positions in the civil and defence aerospace, marine and energy markets. Business type(s): Platform

Rose Consulting Engineers Limited 17 Home Farm Avenue, Macclesfield, Cheshire. SK10 3QW United Kingdom Tel : +44 (0)1625 501 054 Fax : +44 (0)7908 257 496 [email protected] www.rose-consulting.co.uk

Rose Consulting Engineers Limited distributes manufacturing simulation/optimisation software, employing electrochemical processes; electroforming, electroplating and electrochemical machining. The company is also a provider of related consultancy services. Business type(s): Services

Rosenberger Micro-Coax Limited 2 Mercury House, Calleva Park, Aldermaston, Berkshire. RG7 8PN United Kingdom Tel : +44 (0)118 981 0023 Fax : +44 (0)118 981 6180 [email protected] www.rmcoax.com Rolls Royce AD ISO 9001

Rosenberger Micro-Coax Limited is a joint venture company owned by Rosenberger GMBH and Micro-Coax Inc. formed in 1988. The company is a manufacturer of coaxial cables, cable assemblies, connectors and components, DC - 60 Ghz. Based in the UK and with a 12,000 Sq ft facility specialising in the manufacture of cable assemblies, which include RG, semi-rigid, low loss and ultra low loss cable assemblies. Customers include SELEX, Thales, Raytheon, EADS, Astrium, BAE, Nokia, Nortel and Lucent. Marketplaces include military, telecommunications, instrumentation, medical and automotive. Business type(s): Component, Equipment/Systems

Roxel UK Summerfield, Kidderminster, Worcestershire. DY11 7RZ United Kingdom Tel : +44 (0)1562 824 061 Fax : +44 (0)1562 828 126 www.roxel.co.uk

NATO/MoD Approved

Roxel is an Anglo-French Company formed in February 2003 by the merging of CELERG of France and Royal Ordnance Rocket Motors of the UK. Roxel is owned equally by SNPE Matériaux Energétiques and MBDA. Roxel’s renowned expertise covers the full range of propulsion technology to comply with the most advanced requirements. Roxel combines French and British background and expertise in design, development and mass production of rocket motors, propulsion units, pyromechanisms and gas generators, providing its customers with the most appropriate solutions. Currently, ROXEL designs and manufactures a large range of rocket motors for tactical missiles including MILAN, HOT, STARSTREAK, VL SEAWOLF, RAPIER, ASRAAM, AS 15, AS 30, ROLAND, ASMP and the EXOCET family of weapons. Business type(s): Component, Equipment/Systems

.52 .53

BLANKINDD PM members' index RSM Aerospace Satelles Limited 19/20 Invincible Road, Farnborough, Hampshire. GU14 7QU United Kingdom Pilgrims Hall, Fiddling Lane, Stowting, Kent. TN25 6AR United Kingdom Tel : +44 (0)1252 370 666 Fax : +44 (0)1252 378 490 Tel : +44 (0)1303 813 937 [email protected] www.rsm.pfw.aero [email protected] www.satellesltd.com

RSM is a world-class supplier to the aerospace industry, manufacturing a wide range of precision components, from Satelles is a mediation service specialising in the resolution of disputes arising in the aviation industry. pipes and ducts to airframe structures. The company continues to be a major player in the various sectors of the Business type(s): Services market including airframe, power plant, fixed and rotary wing encompassing extensive civil and military projects. By utilising their vast experience, skill base, equipment and people, RSM continues to provide the customer with the total solution, by discharging their core business which includes the manufacture of metallic pipe and duct Satyam Computer Services Limited assemblies, welded sub assemblies, airframe sub assemblies and detail parts and Kitting. 6-7 Cedarwood, Chineham Business Park, Basingstoke, Hampshire. RG24 8WD United Kingdom Tel : +44 (0)1256 394 100 Fax : +44 (0)1256 357 741 RWD Technologies UK Limited [email protected] www.satyam.com

6250 Bishops Court, Birmingham Business Park, Birmingham , West Midlands. B37 7YB United Kingdom Satyam Computer Services Limited is a leading global consulting and IT services company, offering a wide array Tel : +44 (0)121 770 1011 Fax : +44 (0)121 329 0834 of solutions customised for a range of key verticals and horizontals. From strategy consulting right through to [email protected] www.rwd.com implementing IT solutions for customers, Satyam straddles the entire IT space. As a diverse end-to-end IT solutions provider, Satyam offers a range of expertise aimed at helping customers re-engineer and re-invent their businesses to RWD Technologies UK Limited is a professional services organisation that focuses on providing people with compete successfully in an ever-changing marketplace. Satyam's network spans 55* countries, across 6* continents. the knowledge and tools they need to support their potential at work. RWD Technologies UK Limited develops, Over 28,000* dedicated and highly skilled IT professionals work in development centres in India, the USA, the UK, the implements and supports products and services used to deliver business transformation and change management UAE, Canada, Hungary, Singapore, Malaysia, China, Japan and Australia* and serve over 469* global companies, including programmes, performance and continuous improvement, including Lean and Six Sigma, and ERP consulting and over 156* Fortune 500 corporations. (* Figures as of December 31, 2005) training programmes. Business type(s): Services Business type(s): Services Saywell International Limited RWS Group Aviation House, Woods Way, Goring by Sea, Worthing, West Sussex. BN12 4QY United Kingdom RWS Group Translation Division, Europa House, Marsham Way, Gerrards Cross, Buckinghamshire. Tel : +44 (0)1903 705 700 Fax : +44 (0)1903 705 701 SL9 8BQ United Kingdom [email protected] www.saywell.co.uk Tel : +44 (0)1753 480 200 Fax : +44 (0)1753 480 280 [email protected] www.rws.com AS 9100, AS/EN9120, CAA Approved, ISO 9002, JAR Approved RF Saywell Limited was founded in 1946 by Ron Saywell. The company initially provided spares for the Tiger Moth, Rapide ISO 9001 and other Gypsy engined aircraft. With RF Saywell's experience and diversity, the company has expanded to become RWS Group Translation Division is a translation and localisation company specialising in aerospace, pharmaceutical, a leading supplier to the world's major and regional airlines. Growth has allowed us to introduce regional offices in telecommunications, scientific and legal translations. Established over 40 years ago, RWS is one of the world's the USA, Canada and Singapore. The company's main offices house what is probably the largest combined aircraft leading companies in the language industry. The Group employs over 350 staff, including 70 in-house, qualified, spares inventory in the world. On 15 July 2002, after 57 years of aerospace spares support, the company changed their subject-specialist translators. With production sites in the UK, USA, Germany, Japan and China, and sales offices in trading name to Saywell International, to reflect the rising status in regard to their global operations and growth in Europe, RWS offers its clients a cost-effective, local resource for all translation and localisation needs. international markets. Business type(s): Component, Services Satair Hardware Limited Scott Jardine Limited Shoreham Airport, Shoreham by Sea, Worthing, West Sussex. BN43 5FN United Kingdom International Logistics Centre, Bonehill Road, Tamworth, Staffordshire. B78 3HH United Kingdom Tel : +44 (0)1273 464 046 Fax : +44 (0)1273 464 577 [email protected] www.satairhg.com Tel : +44 (0)1827 306 060 Fax : +44 (0)1827 63 042 [email protected] www.scott-jardine.com AS 9100, AS/EN9120, CAA Approved, ISO 9002, JAR Approved Established in 1987, Scott Jardine have forged a reputation as one of the UK's leading search and selection The Satair Hardware Group (SHG) was created when C J Fox merged with the OEM activities of Satair A/S, and more consultancies. The company are also experts in the application of leading edge psychometrics, as part of a best recently, SHG acquired Lentern (Aircraft) Limited and Lentern International Inc. With headquarters in the UK and practice, multi-method assessment methodology, suitable for the 21st Century. Scott Jardine's commitment to their offices in Denmark, France, Germany, Holland, USA and China, SHG is the largest aerospace hardware distributor in clients is to identify exceptional candidates and minimise the risks inherent in any recruitment programme, through the Europe. The Group offers its customers the benefits of: extended outsourcing, a wide product range, competitive development of a robust and reliable selection process. prices, the latest in supply chain management, logistics and IT, total technical service, full design engineering support Business type(s): Services and customer drawn parts. Business type(s): Component, Services

.54 .55 members' index SEA (Group) Limited Servo & Electronic Sales Limited Beckington Castle, PO Box 800, Frome, Somerset. BA11 6TB United Kingdom Connector House, Harden Road, Lydd, Kent. TN29 9LX United Kingdom Tel : +44 (0)1373 852 000 Fax : +44 (0)1373 831 133 Tel : +44 (0)1797 322 500 Fax : +44 (0)1797 321 569 [email protected] www.sea.co.uk [email protected] www.servoconnectors.co.uk

ISO 9001, ISO 9002, NATO/MoD Approved, OEM Approved Servo & Electronic Sales Limited is a family owned leading electrical connector distribution and assembly company. With stock in excess of 2.5 million parts and major franchise agreements with manufacturers around the world, Servo Founded in 1988, SEA is a UK-based systems house delivering high-quality engineering and products for demanding is able to respond quickly and positively to all connector needs, whatever the application. Industries covered; military environments. An independent, employee-owned Small Medium Enterprise (SME), the company has achieved sector (MoD, army, navy, air force), aerospace, communication, rail, traffic, transport, machine tool, harsh environment consistent growth of 20% per annum over the last five years and is targeting growth of 20%-30% in the future. and robotics, as well as many others. Servo has franchise agreements with leading manufacturers covering a SEA's technical staff work freely throughout diverse markets, cultivating innovative concepts, skills and techniques comprehensive range of Mil Spec and Industrial Circular and Rectangular Connectors. The company is a leader of across the space, battlespace marine and transport domains. SEA has a reputation for quality, innovation and supplier connector assembly tools and accessories including EMC RFI adaptors Mil C 85049 and protective covers for cost-efficient solutions, whilst maintaining a knowledge and skill base which matches the expanding boundaries of commercial and mil spec connectors. technology. The net result of SEA's unique approach is that the company has become recognised as a partner and supplier of choice by Government agencies, leading industrial prime contractors and academia to provide state-of- Business type(s): Component, Equipment/Systems the-art systems and products. Business type(s): Equipment/Systems, Services Sigma Management Development Limited 4 The Courtyard, Denmark Street, Woking, Berkshire. RG40 2AZ Seco Tools (UK) Limited United Kingdom Arden Forest Industrial Estate, Alcester, Warwickshire. B49 6EL United Kingdom Tel : +44 (0)118 977 1855 Fax : +44 (0)118 977 4995 [email protected] www.sigmamdl.co.uk Tel : +44 (0)1789 76 341 Fax : +44 (0)1789 761 170 [email protected] www.secotools.com Sigma Management Development Limited is a company that specialises in Partnering and Supply Chain Relationships and is the 1st choice provider of consultancy, facilitation and training services specifically tailored for the aerospace ISO 9001 and defence sector. Since its foundation in 1983, Sigma has delivered improvement programmes across most of the Seco Tools (UK) Limited is a market reader in the field of cutting tools. 40 wholly-owned subsidiaries and a large major complex programmes, deploying the successful process and tools that underpin the Supply Chain Relationships in number of agents and distributors provide Seco with coverage in more than 50 countries around the world. Seco has Action (SCRIA) Programme. manufacturing units in Sweden, Germany, United Kingdom, Italy, France, Brazil, China, Japan, Australia and USA, as well Business type(s): Services as local workshops for special tools in most markets. Business type(s): Facilities, Services Sigma Precision Components Limited Defence, Science and Technology International Logistics Centre, Bonehill Road, Tamworth, Staffordshire. B78 3HH United Kingdom Tel : +44 (0)870 6092 420 Fax : +44 (0)1827 54888 Enterprise House, 11 Bartley Wood Business Park, Bartley Way, Hook, [email protected] www.sigmacomponents.com Hampshire. RG27 9XB United Kingdom Sigma Precision Components manufactures precision machined aerospace components and delivers solutions to Tel : +44 (0)1256 745 900 Fax : +44 (0)1256 745 930 clients wishing to access emerging markets and source low-cost manufacturing. Having a 3000m2 facility in Chengdu, [email protected] www.serco.com China, supported by offices in the UK and China, the company's hands-on approach can be tailored to suit your needs, BS EN ISO 14001:2004, BS EN ISO 9001:2000, CAA Approved, IIP Accredited, ISO 14001, JAR Approved, anything from basic advice to complete sourcing. Sigma Precision has extensive experience operating global aerospace NATO/MoD Approved, OEM Approved, Testing & Certification, UK Anticorruption Forum markets and has developed a capability to help small, medium and large companies face the challenges of globalisation in their industry. With a purpose-build low-cost manufacturing capability of their own, supported by a well established Serco is a leading provider of integrated service solutions in the worldwide defence and aerospace markets. low cost supply chain, Sigma Precision is able to bring the benefits of global players to the door of UK aerospace From independent advice to solution design, the company delivers capability and availability. With over 40 years’ customers. experience of delivering assured services, and as a key supplier to the UK MoD, Serco understands how to integrate Business type(s): Facilities, Platform, Services people, processes, change and technologies for the benefit of its customers. The company combines its breadth of management skills with a unique way of engaging its customers to deliver service excellence. Business type(s): Platform, Services Signature Industries Limited Tom Cribb Road, Thamesmead, London. SE28 0BH United Kingdom Tel : +44 (0)20 8316 4477 Fax : +44 (0)20 8316 6218 www.sarbe.com www.signatureindustries.com

CAA Approved, ISO 9001, JAR Approved, NATO/MoD Approved

SARBE has been developing manufacturing and supporting Personnel Locator Beacons for nearly 50 years and are widely acknowledged to be the market leader in providing PLBs for use during peacetime to armed forces around the world. Business type(s): Equipment/Systems .56 .57 members' index Silcoms Limited SKF (U.K.) Limited Piggot Street, Farnworth, Bolton, Lancashire. BL4 9QN United Kingdom Aerospace Division, 108 Strode Road, Clevedon, Somerset. BS21 6QQ United Kingdom Tel : +44 (0)1204 571 305 Fax : +44 (0)1204 861 723 Tel : +44 (0)1275 876 021 Fax : +44 (0)1275 878 480 [email protected] www.silcoms.co.uk [email protected] www.ampep.co.uk

ISO 9002, OEM Approved AS 9100, BS EN ISO 14001:2004

Silcoms Limited is the United Kingdom’s leading supplier of machined rings to the aero engine industry. The company The SKF Group is the leading global supplier of products, customer solutions, and services in the business of rolling manufactures rings, casings, seals, shrouds and segments as components or assemblies for many of Europe’s aero bearings and seals. The Group's main competencies include technical support, maintenance services, condition engine manufacturers. Silcoms specialises in producing complex ring type products made from high nickel content monitoring and training. SKF also holds an increasingly important position in the market for linear motion products, as ‘super alloys’ or other materials such as titanium, stainless steel, and aluminium. The company’s core competence is well as high precision bearings, spindles and spindle services for the machine tool industry and lubrication systems. SKF for components in the size range 200 mm diameter to 2000 mm diameter, but a capability from 10 mm diameter is has 100 manufacturing sites distributed all over the world. With its own sales companies in 70 countries, supported available. The company offers a complete service including kitting and the control of specialist treatments and sub- by some 15,000 distributors and dealers worldwide, its e-business marketplace and global distribution system, SKF is tiers. always close to its customers for the supply of both products and services. Business type(s): Facilities, Platform Business type(s): Component

SITA SC SKF Aeroengine UK 26 chemin de Joinville, 1216 Cointrin, Geneva, Switzerland Oldends Lane, Stonehouse, Gloucestershire. GL10 3RH United Kingdom Tel : +41 22 747 6111 Fax : +41 22 747 6110 Tel : +44 (0)1453 822 333 Fax : +44 (0)1453 852 244 [email protected] www.sita.aero [email protected] www.skf.com

SITA is the world's leading service provider of IT business solutions and communications services to the air SKF Aeroengine UK designs and manufactures rolling element bearings for aerospace and other critical applications. transport industry. With over 55 years experience SITA manages complex communication solutions for its air Business type(s): Platform transport, government and GDS customers over the world’s most extensive communication network, complemented by consultancy in the design, deployment and integration of communication services. SITA provides market- leading common use services to airports and air-to-ground communications to airlines. The company delivers a Southern Filters Limited comprehensive portfolio of e-commerce solutions for airlines and is pioneering new technologies in areas such as in- Carbrae, Woodhouse Hill, Uplyme, Lyme Regis, Dorset. DT7 3SL United Kingdom flight passenger communications and transportation security. Business type(s): Equipment/Systems, Services Tel : +44 (0)1297 444 558 Fax : +44 (0)1297 444 558 [email protected] www.southernfiltersltd.com Sitec Group Southern Filters Limited was formed in July 1999 and supplies dust free sanding system solutions to airframe OE and after market manufacturer and repair. Customers include and Southern Filters Limited has recently 420 Bristol Business Park, Coldharbour Lane, Bristol, Avon. BS16 1EJ United Kingdom been awarded a 5 year long term agreement with the MoD to support all their aircraft fleet in support of paint and Tel : +44 (0)117 979 2396 Fax : +44 (0)117 979 9100 composite maintenance and repair. Southern Filters Limited also maintains MoD vehicles from tanks to ships. [email protected] www.sitecgroup.com Business type(s): Component

AS/EN9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000, CAA Approved, Customer Approved, NATO/MoD Approved Specialist Technologies Limited Sitec Group is a leading design, management consultancy and recruitment company. The company has extensive 1 Lyon Road, Walton-On-Thames, Surrey. KT12 3PU United Kingdom experience and a considerable knowledge base in the use of the latest CAD/CAM/CAE/PDM and PLM tools. The Group Tel : +44 (0)1932 251 500 Fax : +44 (0)1932 251 510 has further expanded its technical footprint into safety management, airworthiness reviews, bids, trials, project [email protected] www.stag-aerospace.com management and requirements management (DOORS) through the acquisition of JRA Aerospace (www. jra-aero.com). Business type(s): Component, Equipment/Systems, Facilities, Materials, Platform, Services AS/EN9120, ISO 9002, NATO/MoD Approved Specialist Technologies Limited has the design and production rights to the Dunlop designed range of breathing air compressors. These units can also be incorporated into air starter trolleys for aircraft of all types including wide- bodied. The compressors are mainly used by emergency services, diving organisations and clubs to charge bottles with breathing air. The company offers full product support and manufacture to specific requirements. Customers include the UK MoD, BNFL, Vickers Shipyards and several major navies worldwide. Business type(s): Services

.58 .59 members' index Stone Foundries Limited Woolwich Road, Charlton, London. SE7 8SL United Kingdom Spirit AeroSystems (Europe) Limited Tel : +44 (0)208 853 4648 Fax : +44 (0)208 305 1934 Building 90, Prestwick International Airport, Prestwick, Ayrshire, Scotland. KA9 2RW United Kingdom [email protected] www.stone-foundries-limited.com Tel : +44 (0)1292 672 634 AS 9100, BS EN ISO 9001:2000, CAA Approved, ISO 9002, NADCAP [email protected] www.spiritaero.com Stone Foundries is widely recognised as a world class manufacturer of high integrity precision sand and investment AS 9100, BS EN ISO 14001:2004, BS EN ISO 9001:2000 castings in magnesium and aluminium. Castings are supplied to the aerospace, defence, motor racing and medical Spirit AeroSystems (Europe) Limited is a wholly owned subsidiary of Spirit AeroSystems, the world’s largest industries. Aerospace applications include transmission casings, jet engine housings and control systems for independent designer and manufacturer of aerostructures. On April 1, 2006, Spirit AeroSystems (Europe) Limited was helicopters and aircraft. Key customers include Agusta-Westland, Airbus, BAE Systems, MBDA, Rolls-Royce and Smiths formed through the acquisition of the aerostructures division of BAE Systems PLC, or BAE Systems Aerostructures, Aerospace. Situated in South-East London, the company has all required facilities in-house including X-ray and dye- headquartered in Prestwick, Scotland. The company provides major wing structural assemblies, sub-assemblies and penetrant inspection, heat treatment, surface treatment and metallurgical laboratory. Castings can also be supplied components to Airbus, Boeing and Raytheon and employs over 800 people, the majority in Prestwick, with a satellite fully machined or datum machined. Stone Foundries has a range of company and international aerospace approvals facility in Samlesbury, Lancashire. including BS EN ISO 9001:2000 and EN9100:2003. The company is also NADCAP accredited for various special processes. The company is part of Langham Industries, a privately owned group with global business interests. Business type(s): Component, Facilities, Materials, Services Business type(s): Facilities, Materials, Services St. Bernard Composites Limited Sungard Vivista Limited 21 Invincible Road, Farnborough, Hampshire. GU14 7QU United Kingdom Methuen Park, Bath Road, , Wiltshire. SN14 0TW United Kingdom Tel : +44 (0)1252 304 000 Fax : +44 (0)1252 304 001 [email protected] www.stbernard.co.uk Tel : +44 (0)1249 665 494 Fax : +44 (0)8456 042 999 [email protected] www.sungard.com/vivista AS 9100, CAA Approved, ISO 9001 Sungard Vivista has over 30 years experience in mission critical emergency response and criminal justice solutions, St Bernard Composites Limited (SBCL) is a global player in high performance, low weight advanced composite across police, fire, ambulance, coastguard, RAF search & rescue, army, navy, air force, the highways agency, British structures, components and applications. As a leading UK composite manufacturer, over 90% of its production is Transport Police and London Underground. exported. SBCL’s continuing success is based on a sustained programme of investment and innovation. The company Business type(s): Services has a deep commitment to the development of world class facilities, lean manufacturing and business processes supported by a continuous programme of staff development. Business type(s): Component, Facilities, Materials Superite Tools Limited Vigo Place, Aldridge, Walsall, West Midlands. WS9 8UG United Kingdom Stinson Aerospace Tel : +44 (0)1922 451 151 Fax : +44 (0)1922 743 176 [email protected] www.superite.co.uk Craiglands Business Centre, 1 Brooklyn, Threshfield, Yorkshire (North). BD23 5ER United Kingdom Tel : +44 (0)1756 752 844 Fax : +44 (0)1756 752 798 AS 9100, AS/EN9100, ISO 9001 [email protected] Established in 1955, Superite's level of quality and service has resulted in the forming of close working partnerships Stinson Aerospace is a manufacturer of several highly specialised aircraft fastening devices, with six Patents with numerous customers, serving amongst others, Rolls-Royce, Ferrarri, Ford, Bentley, Aston Martin, Landrover, G.D.A, pending. In addition to manufacturing components, Stinson Aerospace offers consulting services to several Toyota, Honda, Nissan, Jaguar, TRW and GPT, with exports to the USA, Germany, Ireland and Spain. 12 tonne capability, aerospace component manufacturing companies located in the United States. Stinson Aerospace is a member of the injection moulds, compression moulds, pressure dies, aluminium prototype tooling, aerospace precision machining and Northwest Aerospace Alliance, SAE and the Royal Aeronautical Society. assembly, jigs and fixtures. Business type(s): Component Business type(s): Facilities Surface Technology International Limited Osborn Way, Hook, Hampshire. RG27 9HX United Kingdom Tel : +44 (0)1256 768 070 Fax : +44 (0)1256 746 746 [email protected] www.sti-limited.com

ISO 9001

Surface Technology International Limited began in 1989 to fill a gap in the market for fast-turn assembly of surface mount prototypes using the finest placement equipment and to the highest quality standard. The company has evolved over the intervening years into a powerful contract manufacturing business managing full turnkey programmes in demanding market sectors such as defence, aerospace, nuclear power and medical.

.60 .61 members' index

Surrey Satellite Technology Limited The Barden Corporation (UK) Limited Tycho House, Surrey Space Centre, 20 Stephenson Road, Surrey Research Park, Guildford, Surrey. Plymbridge Road, Plymouth, Devon. PL6 7LH United Kingdom GU2 7YE United Kingdom Tel : +44 (0)1752 735 555 Fax : +44 (0)1752 733 481 Tel : +44 (0)1483 803 803 Fax : +44 (0)1483 803 804 [email protected] www.barden.co.uk [email protected] www.sstl.co.uk AS 9100, AS/EN9100, AS/EN9120, AS9120, BS EN ISO 14001:2004, IIP Accredited, ISO 14001, ISO 9001 Surrey Satellite Technology Limited is an enterprise company formed in 1985 by the University of Surrey to commercialise the results of its innovative small satellite engineering research. SSTL was the first professional A recognised leader in the production of super-precision ball bearing systems. Unrivalled manufacturing expertise and organisation to offer low-cost small satellites with rapid response employing advanced terrestrial technologies. Over ability to design bespoke engineering solutions. We also offer an extensive range of super-precision ball bearings for a two decades, the company has built a profitable business around our unique approach to space. Today, SSTL employs variety of applications. Barden is a member of the Schaeffler Group, one of the world’s leading bearing manufacturers. over 200 staff and has been involved in 23 small satellite missions, making it the most successful and experienced Business type(s): Component, Facilities, Services small satellite supplier in the world. Business type(s): Equipment/Systems, Platform The Technology Partnership PLC (TTP) Teledyne Limited Melborn Science Park, Cambridge Road, Melbourn, Royston, Hertfordshire. SG8 6EE United Kingdom Tel : +44 (0)1763 262 626 Fax : +44 (0)1763 261 582 9-13 Napier Road, Wardpark North Industrial Estate, Cumbernauld, Lanarkshire, Scotland. G68 0EF [email protected] www.ttp.com United Kingdom Tel : +44 (0)1236 733 700 Fax : +44 (0)1236 780 080 TTP is a product and technology development company, with 300 engineers and scientists based at the Cambridge www.teledyne.com headquarters. TTP offers a number of services including; turnkey product development, rapid development and small prototype runs, software development, sub-system development, electronics hardware, RF design, communications Teledyne Limited is a high mix, low volume, technology-based electronic contract manufacturing company based in protocols, embedded software, integrated vision systems, algorithms, sensors, expert systems, mechanical design and Scotland. Teledyne Electronics and Communications European facility was established in Cumbernauld, Scotland technical consultancy. in 1992 to manufacture and supply high specification relays and complex assemblies for military and aerospace Business type(s): Services applications. More than 30 years experience in advanced contract manufacturing specialising in complex mixed technology PCB and sub-assembly for the military, aerospace, medical and space markets. The European HQ is based in Scotland with facilities in Newbury (high voltage cable and connectors: 30% UK, 70% international), Heathrow (flight TIMET UK Limited safety software for Data Acquisition systems), and Gloucester (solid state relays and hydroplane streamers). PO Box 704, Witton, Birmingham, West Midlands. B6 7UR United Kingdom Business type(s): Component, Equipment/Systems Tel : +44 (0)121 356 1155 Fax : +44 (0)121 356 5413 [email protected] www.timet.com

Thales UK Plc OEM Approved 2 Dashwood Lang Road, The Bourne Business Park, Addlestone, Near Weybridge, Surrey. KT15 2NX United Kingdom TIMET is a supplier of high quality titanium metal products. With its unique combination of strength, light weight, corrosion resistance and other metallurgical properties, titanium is used in hundreds of diverse aerospace, industrial Tel : +44 (0)1932 824 800 Fax : +44 (0)1932 824 948 and emerging applications where no other metal is as reliable or economical, especially on a lifecycle costing basis. As [email protected] www.thalesgroup.co.uk a fully-integrated titanium manufacturer and distributor, TIMET's activities span every phase of titanium research, manufacturing and sales. The company converts rutile ore into sponge; melts and refines ingot and slab; manufactures UK Anticorruption Forum mill products and distributes their products globally. Thales is a major industrial force in the UK. With over 9,000 employees based at 70 locations throughout all regions, Business type(s): Facilities, Materials, Services Thales UK is a leader in aerospace and defence prime contracting, systems and equipment. Thales provides systems at the heart of the UK's military capability as well as delivering service and security solutions for both defence and civil applications from flight simulation and training provision to secure transactions and integrated communications. Titanium Industries UK Limited Revenues in 2006 were over £1bn, a third of which were for export. Thales UK prides itself on its commitment to Unit 5, Chelmsley Wood Industrial Estate, Waterloo Avenue, Kingshurst, Birmingham, West Midlands. understanding and serving the needs of all its customers, and to delivering on quality, time and cost. Trusted as B37 6QQ United Kingdom a prime contractor, supplier, partner, service provider and employer of choice, Thales will continue to develop its capabilities in the United Kingdom. Tel : +44 (0)121 788 8065 Fax : +44 (0)121 788 3362 [email protected] www.titanium .com Business type(s): Equipment/Systems, Platform, Services Titanium Industries is a leading supplier and processor of titanium and nickel alloys in all forms and grades, with worldwide distribution centres to service material needs. Quality approvals including: AS9100 Rev B and various customer approvals. Business type(s): Facilities, Materials, Services

.62 .63 members' index Trelleborg Sealing Solutions UK Solihull Holdings PLC Pegasus House, 1 Cranbrook Way, Solihull Business Park, Solihull, West Midlands. B90 4GT United Kingdom 417 Bridport Road, Greenford, Middlesex. UB6 8UA United Kingdom Tel : +44 (0)121 744 1221 Fax : +44 (0)121 733 2442 Tel : +44 (0)20 8813 4444 Fax : +44 (0)20 8813 4351 [email protected] www.tss.trelleborg.com [email protected] www.ultra-electronics.com

Trelleborg Sealing Solutions offers cost effective sealing solutions to the Global Aerospace Community. Our Ultra Electronics is a group of specialist businesses designing, manufacturing and supporting electronic and product offering includes sealing systems for:- Flight Control Actuation, Landing Gear, Aircraft Engines, Aircraft electromechanical systems, sub-systems and products for defence, security and aerospace applications worldwide. Canopies, Fuel Systems, Doors and Hatches, Wheel and Brake and Aerodynamic Seals.To better support the needs Ultra, which employs 3,000 people in the UK and North America, focuses on high integrity sensing, control, of the Aerospace Industry we have aligned our business to provide a support infrastructure covering an aircraft communication and display systems with an emphasis on integrated information technology solutions. Ultra’s products programme’s entire lifecycle. Our business concept is to deploy design and technical expertise during the development and services are used on aircraft, ships, submarines, armoured vehicles, surveillance and communication systems, phase of a programme and our global network to support the programme throughout the operational life. airports and transport systems around the world. Ultra plays an important role in supporting prime contractors by undertaking specialist system and sub-system integration using the combined expertise of the Group businesses. Business type(s): Component, Materials, Platform, Services Business type(s): Component, Equipment/Systems, Services TRW Conekt Unipart Logistics Limited Stratford Road, Solihull, West Midlands. B90 4GW United Kingdom Unipart House, Cowley, Oxford, Oxfordshire. OX4 2PG United Kingdom Tel : +44 (0)121 627 4242 Fax : +44 (0)121 627 4243 [email protected] www.conekt.net Tel : +44 (0)1865 778 966 Fax : +44 (0)1865 383 763 [email protected] www.unipartlogistics.com Conekt is the external consultancy arm of TRW Automotive, generating new ideas and applying science and technology in product development, manufacture and validation. Based on almost 50 years of R&D experience, Conekt provides Unipart Logistics is the logistics and business services division of the Unipart Group of Companies and, as one of key services in engineering, knowledge and technology across a number of industries including automotive, aerospace Europe's leading service providers of logistics, provides comprehensive integrated logistics to the telecommunications, and defence. Utilising the skills of its in-house Engineering and Services division, Conekt is in the unique position to automotive, information technology, retail, aerospace, rail, industrial and defence sectors. Unipart Logistics adds value offer a complete engineering service from concept design and development through prototype and validation testing to clients' demand chains, improving customer service and reducing inventories. Logistics solutions are driven by the to low volume manufacture. demands of customers; products and services are 'pulled' through a series of interlinked processes, a Demand Chain, rather than 'pushed' through a supply chain. Business type(s): Services Business type(s): Services TWI Limited Universal Steels and Aluminium Limited Granta Park, Great Abington, Cambridge, Cambridgeshire. CB21 6AL United Kingdom Unit 7 Cranfield Road, Lostock Industrial Estate, Bolton, Greater Manchester. BL6 4SB United Kingdom Tel : +44 (0)1223 899 000 Fax : +44 (0)1223 892 588 [email protected] www.twi.co.uk Tel : +44 (0)1204 669 356 Fax : +44 (0)1204 669 358 [email protected] www.usanda.co.uk TWI Limited, the operating arm of The Welding Institute, is one of the world's foremost independent research and technology organisations. Based at Great Abington near Cambridge since 1946, TWI provides industry with engineering AS 9100, AS/EN9100, AS/EN9120, BS EN ISO 9001:2000, Customer Approved, ISO 9001, ISO 9002, NADCAP, solutions in structures incorporating welding and associated technologies. OEM Approved, Testing & Certification

Business type(s): Facilities, Materials, Services Universal Steels and Aluminium Limited, with over 10 years of experience in the aerospace metals industry, has become one of the UK's leading metal stockholders in the aerospace industry. The company stocks a wide range of material Tyco Electronics UK Limited specifications and offers an extensive range of material profiling, machining and handling options. Business type(s): Component, Facilities, Materials, Services Faraday Road, Dorcan, Swindon, Wiltshire. SN3 5HH United Kingdom Tel : +44 (0)1793 528 171 Fax : +44 (0)1793 572 516 [email protected] www.tycoelectronics.com University of Glasgow Aerospace Engineering Department, James Watt Building (South), University of Glasgow, Lanarkshire, As the largest electronic component supplier in the world, Tyco Electronics is well positioned with a wide and Scotland. G12 8QQ United Kingdom unequalled product portfolio to service the Aerospace, Defence and Marine markets. Our products are backed with expertise in engineering, design, prototyping, manufacturing, quality assurance, agency approvals, logistics, Tel : +44 (0)141 330 3575 Fax : +44 (0)141 330 5560 programme management, materials science, tooling, test equipment, metals, plating, electromagnetic shielding and [email protected] www.aero.gla.ac.uk environmental protection. The University of Glasgow provides undergraduate, postgraduate and CPD training including; avionics, aeronautical Business type(s): Component, Equipment/Systems, Facilities, Materials engineering and aerospace engineering. The University also provides research groups in flight dynamics, low speed aerodynamics, aircraft design and structures, space system engineering, air traffic management and avionics, computational fluid dynamics, and aerospace and marine systems and control. The University has close links with mechanical, electronic and power engineering experimental wind tunnel facilities. Business type(s): Services

.64 .65 members' index Valtech Limited Waer Systems Limited 120 Aldersgate Street, London. EC1A 4JQ United Kingdom Eight The Quadrant, Marlborough Road, Lancing, West Sussex. BN15 8UF United Kingdom Tel : +44 (0)20 7014 0800 Fax : +44 (0)20 7014 0801 Tel : +44 (0)1903 768 010 Fax : +44 (0)1903 768 022 [email protected] www.valtech.co.uk [email protected] www.waersystems.com

Valtech Limited is a global application development and systems integration company headquartered out of France Waer Systems Limited provides world-class Replenishment Management Systems (RMS) to help manufacturers and with offices in the US, India and the UK. Valtech’s aerospace expertise is built by domain experience acquired during suppliers gain optimal profitability from their supply chains, as well as increase their overall control and visibility. Waer years of work in civil and military aerospace and avionics systems. The company's abilities cover development, Systems specialises in designing and implementing lean techniques and processes into the distribution and warehouse independent verification and validation, certification and documentation services and EEM/PDM. Valtech works with environments with a focus on the aerospace and defence industries. customers to identify business needs and translates them into effective, workable solutions. Business type(s): Services Business type(s): Facilities, Services Walker Precision Engineering Virtual Interconnect Limited 4 Fullarton Drive, Glasgow East Investment Park, Glasgow, Lanarkshire. G32 8FA United Kingdom Hillington Park Innovation Centre, 1 Ainslie Road, Hillington Park, Glasgow, Scotland. G52 4RU Tel : +44 (0)141 641 9641 Fax : +44 (0)141 646 2060 United Kingdom [email protected] www.walkerprecision.com Tel : +44 (0)141 585 6450 Fax : +44 (0)141 585 6301 [email protected] www.virtual-interconnect.co.uk AS/EN9100, BS EN ISO 9001:2000

Located within the High Tech Innovation Centre, Virtual Interconnect Limited is a knowledge based company Walker Precision Engineering is a forward looking technology led contract manufacturing company. Established in utilising advanced 3D modelling techniques to design complex wire harness assemblies. By generating parametric 1979 the company has risen to the challenges of changing market conditions. From small beginnings the company and associative Virtual Prototypes using 3D CAD Tools in conjunction with proprietary data extraction software, now employs over 150 skilled personnel over three sites. The company services markets worldwide, covering a diverse both overall project costs and product time to market are significantly reduced. Virtual Interconnect's bespoke customer base in engineering cutting edge sectors. electromechanical design processes, 2D/3D and 3D/3D, reduce Product Lifecycle Management and Supply Chain costs by exploiting the associativity of 3D models to minimise the time to change, while simultaneously providing error free, supplier oriented Product Data Sets. Weston Aerospace Business type(s): Component, Services 124 Victoria Road, Farnborough, Hampshire. GU14 7PW United Kingdom Tel : +44 (0)1252 544 433 Fax : +44 (0)1252 371 216 W & J Tod Limited [email protected] www.westonaero.com 8 Cropmead, Crewkerne, Somerset. TA18 7HQ United Kingdom AS 9100

Tel : +44 (0)1460 77666 Fax : +44 (0)1460 78001 Weston Aerospace, a key division within the Esterline Sensors Group, is a market leader in sensors and accessories [email protected] www.tods.co.uk for aero-engines, industrial gas turbines and airframes. Underpinning this drive for growth is a commitment to their people, and through them to quality, cost-effectiveness and delivery. BS EN ISO 9001:2000 Business type(s): Component, Services Tods has over 50 years experience in manufacture in composite materials, with 25 of those in the aerospace sector. Tods designs and builds composite solutions in thermoplastic and thermoset materials. In-house 3-D modelling (Catia) and FE analysis capability. Structural, non-structural - interiors/fuselage/wing - commercial and military; Weston EU Limited rotary wing and fixed wing composite components. Station Road, Foulridge, Colne, Lancashire. BB8 7LE United Kingdom Business type(s): Facilities, Materials Tel : +44 (0)1282 863 993 Fax : +44 (0)1282 865 834 [email protected] www.westoneu.net

W.L. Gore & Associates (UK) Limited AS 9100, ISO 9001, OEM Approved Mariner Drive, Dundee Technology Park, Dundee, Scotland. DD2 1JA United Kingdom Weston EU Limited supplies complex machined parts for the aerospace engine sector. The company utilises fully integrated management systems through their S.A.P. R3 enterprise Resource Planning system. Weston EU has a Tel : +44 (0)1382 561 511 Fax : +44 (0)1382 561 007 comprehensive range of sophisticated 3-D modelling CAD/CAM systems and a diverse range of state of the art CNC [email protected] www.gore.com machine tools approaching 100 in number. These include: turning capability ranges from Sliding Head to 6-axis lathes and 2 metre diameter VTLs; milling resources range from small high speed 3-axis machines up to large 4 metre, 5-axis ISO 9001, OEM Approved pendulum configuration machines; grinding capabilities include creep feed and 5-axis super-abrasive machines. W. L. Gore & Associates is comprised of approximately 6,000 associates in 45 locations around the world. Annual Business type(s): Platform revenues top $1.5 billion. Their fluoropolymer products provide innovative solutions throughout industry, in next- generation electronics, for medical products, and with high-performance fabrics. W.L. Gore creates next generation cable assemblies and components for the electronics industry, sets the standard for outerwear comfort and protection, solves difficult industrial problems with innovative materials and technology, and Gore medical products work in harmony with the body's own tissues to restore normal body function. .66 Business type(s): Component .67 members' index index index of products & services

Wheelabrator Group Limited components Jabil Circuit UK Jesmond Engineering Limited Impact Finishers, 107-109 Whitby Road, Slough, Berkshire. SL1 3DR United Kingdom Aeromet International Plc Kearsley Airways Limited Tel : +44 (0)161 928 6388 Fax : +44 (0)161 929 0381 [email protected] www.wheelabratorgroup.com Air Parts Limited Kembrey Wiring Systems Limited Airbus UK Limited Kidde Graviner Limited Designing, delivering and supporting surface preparation equipment on a global scale, the Wheelabrator Group is Aircraft Braking Systems Limited Kingston University formed from the world's largest, most experienced and trusted brand names in surface preparation and finishing. Wheelabrator Group uses all the different technologies ranging from air blasting, wheel blasting, wet blasting, AMETEK Airtechnology Group Limited Knight Precision Wire Limited ultrasonics, washing, mass finishing, peening or painting. Amphenol Limited Leach International UK Limited Business type(s): Facilities AmSafe Bridport Ltd Linread Northbridge Apollo Hitech Limited Magellan Aerospace (UK) Limited Wragge & Co LLP APPH Limited Marshall of Cambridge Aerospace Limited 55 Colmore Row, Birmingham, West Midlands. B3 2AS United Kingdom Armstrong Precision Components Limited Martin-Baker Aircraft Company Limited Assystem UK Limited Meggitt PLC Tel : +44 (0)870 903 1000 Fax : +44 (0)870 904 1099 [email protected] www.wragge.com Axis Electronics Limited Mettis Aerospace Limited BAE SYSTEMS PLC Microfiltrex - a Division of Porvair Wragge & Co LLP is a leading UK law firm and has the resource to handle the largest transactions. Wragge & Co has Barnbrook Systems Limited Filtration Group Limited a market leading specialist aerospace and defence sector team. Wragge & Co acts for a wide range of businesses Northrop Grumman UK across the industry. Barnes Aerospace Page Aerospace Limited Business type(s): Services BAS Aerospace Limited Bombardier Aerospace Parker Hannifin Limited Bulwell Precision Engineers Limited Pascall Electronics Limited Castlet Limited Pattonair Limited Chemring Group Plc Polamco Limited CML Group Plc Prodrive Limited COM DEV Europe Limited Quicksource On-Line Limited Cross Manufacturing Company (1938) Rockford Components Limited Limited Rosenberger Micro-Coax Limited Darchem Engineering Limited Roxel UK Defence Aviation Repair Agency (DARA) Satair Hardware Limited Denroy Plastics Limited Saywell International Limited Deutsch UK Servo & Electronic Sales Limited Doncasters Limited Sitec Group Excel (Electronics) Assemblies Limited SKF (U.K.) Limited Ford Component Manufacturing Limited Southern Filters Limited Freeman & Proctor Limited Spirit AeroSystems (Europe) Limited Freudenberg Simrit LP St. Bernard Composites Limited GE Aviation (formerly Smiths Aerospace) Stinson Aerospace GKN Aerospace Services Limited Teledyne Limited Glenair UK Limited The Barden Corporation (UK) Limited Goodrich Corporation UK Trelleborg Sealing Solutions UK Solihull Greene, Tweed & Co Limited Tyco Electronics UK Limited Hampson Group plc Ultra Electronics Holdings PLC Honeywell Aerospace Yeovil Universal Steels and Aluminium Limited HS Marston Aerospace Virtual Interconnect Limited Intheairnet Limited W.L. Gore & Associates (UK) Limited J S Chinn Holdings Weston Aerospace

.68 .69 indexmembers' of products index & services

equipment/systems Honeywell Aerospace Yeovil facilities Gardner Group Limited IDS Ingegneria Dei Sistemi (UK) Limited Generation Metals International Limited Accles & Pollock Limited IGG Component Technology Limited Accles & Pollock Limited Glenair UK Limited AD Aerospace Limited Ingenia Technology Limited Aeromet International Plc Greene, Tweed & Co Limited AEI Systems Limited Intheairnet Limited Air & Ground Aviation Limited Hampson Group plc AEROid Limited Jabil Circuit UK Airbus UK Limited Houghton UK PLC Air & Ground Aviation Limited Jesmond Engineering Limited Allvac Limited HPL Prototypes Limited Aircraft Maintenance & Support Services Kearsley Airways Limited Altec Precision Limited HS Marston Aerospace Limited Kidde Graviner Limited Amphenol Limited IGG Component Technology Limited Alcoa Europe Flat Rolled Products Kingston University AmSafe Bridport Ltd Independent Forgings & Alloys Limited AMETEK Airtechnology Group Limited Lockheed Martin UK Limited Apollo Metals Plc Inter-Tec Services Limited AmSafe Bridport Ltd Marshall of Cambridge Aerospace Limited APPH Limited J S Chinn Holdings APPH Limited Martin-Baker Aircraft Company Limited Assystem UK Limited Jabil Circuit UK Assystem UK Limited Meggitt PLC Axis Electronics Limited Jesmond Engineering Limited AviateQ International Limited Messier Dowty Limited Babcock Engineered Products Kingston University Axis Electronics Limited Microfiltrex - a Division of Porvair Filtration BAE SYSTEMS PLC Magellan Aerospace (UK) Limited BAE SYSTEMS PLC Group Limited Barnes Aerospace Magnesium Elektron Barnbrook Systems Limited Moog Controls Limited BCF Designs Limited Maher Limited (Superalloys) Bulwell Precision Engineers Limited Muirhead Aerospace Berck Limited Marshall of Cambridge Aerospace Limited Caledonian Airborne Systems Limited Nederman Limited Bombardier Aerospace MB Faber Limited Castlet Limited Northrop Grumman UK Bulwell Precision Engineers Limited McBraida Plc Chemring Group Plc Pacific Scientific Limited Castle Precision Engineering (Glasgow) Meggitt PLC Claverham Group Ltd Limited Page Aerospace Limited MEP Limited Cobham Plc Castlet Limited Parker Hannifin Limited Metallics Limited COM DEV Europe Limited CAV Aerospace Limited Pascall Electronics Limited Mettis Aerospace Limited Conidia Bioscience Limited Centrax Limited Prodrive Limited MSM Group Coplan Limited Chemring Group Plc Quicksource On-Line Limited Mussett Engineering Limited Daher Aerospace Limited Clico (Sheffield) Tooling Limited Raytheon Systems Limited Nederman Limited Defence Aviation Repair Agency (DARA) Comau Estil RFD Beaufort Limited Nicholsons Sealing Technologies Limited Delcam Plc Coplan Limited Rockford Components Limited Nikken Kosakusho Europe Limited EADS UK Limited Corus Engineering Steels Limited Rockwell Collins UK Limited Poeton Industries Limited Eaton Aerospace Limited Cranfield University Roke Manor Research Limited Polamco Limited EDM Limited Cross Manufacturing Company (1938) Prodrive Limited Rosenberger Micro-Coax Limited Limited ESR Technology Limited RLC Engineering Group Limited Roxel UK Darchem Engineering Limited Excel (Electronics) Assemblies Limited Rockwell Collins UK Limited SEA (Group) Limited Defence Aviation Repair Agency (DARA) Finmeccanica UK Limited Seco Tools (UK) Limited Servo & Electronic Sales Limited Denroy Plastics Limited Freeman & Proctor Limited Sigma Precision Components Limited Signature Industries Limited Doncasters Limited Freudenberg Simrit LP Silcoms Limited SITA SC EADS UK Limited GE Aviation (formerly Smiths Aerospace) Sitec Group Sitec Group Engineering Technology Group GE Sensing Spirit AeroSystems (Europe) Limited Surrey Satellite Technology Limited ENL Limited General Dynamics UK Limited St. Bernard Composites Limited Teledyne Limited ESR Technology Limited GKN Aerospace Services Limited Stone Foundries Limited Thales UK Plc Farsound Engineering Limited Goodrich Corporation UK Superite Tools Limited Tyco Electronics UK Limited Finmeccanica UK Limited Hampson Group plc The Barden Corporation (UK) Limited Ultra Electronics Holdings PLC Ford Component Manufacturing Limited Helmet Integrated Systems Limited TIMET UK Limited Freeman & Proctor Limited

.70 .71 members'index of products index & services

Titanium Industries UK Limited Sitec Group Northrop Grumman UK Castlet Limited TWI Limited Spirit AeroSystems (Europe) Limited Parker Hannifin Limited Chemring Group Plc Tyco Electronics UK Limited St. Bernard Composites Limited Prodrive Limited CIMPA Limited Universal Steels and Aluminium Limited Stone Foundries Limited Quicksource On-Line Limited Cobham Plc Valtech Limited TIMET UK Limited Rolls-Royce PLC Conidia Bioscience Limited W & J Tod Limited Titanium Industries UK Limited Serco Defence, Science and Technology Corbus Europe Limited Wheelabrator Group Limited Trelleborg Sealing Solutions UK Solihull Sigma Precision Components Limited Corus Engineering Steels Limited TWI Limited Silcoms Limited Counterpoint Market Intelligence Limited materialsMaterials Tyco Electronics UK Limited Sitec Group Cranfield University A.S.A, a division of ThyssenKrupp Materials Universal Steels and Aluminium Limited SKF Aeroengine UK Daher Aerospace Limited UK Limited W & J Tod Limited Surrey Satellite Technology Limited Defence Aviation Repair Agency (DARA) Advanced Metals International Thales UK Plc Delcam Plc Aeromet International Plc Platformplatform Trelleborg Sealing Solutions UK Solihull Dolgarrog Aluminium Limited Allvac Limited Aeromet International Plc Weston EU Limited Doncasters Limited Apollo Metals Plc Aircelle Limited EADS UK Limited APPH Limited Alcoa Europe Flat Rolled Products servicesServices EDM Limited Böhler-Uddeholm (UK) Limited AmSafe Bridport Ltd A.S.A, a division of ThyssenKrupp Materials EKES Limited Centrax Limited APPH Limited UK Limited Electronic Data Systems Limited Chemring Group Plc Assystem UK Limited A.T. Kearney Limited Engineering Technology Group Corus Engineering Steels Limited Axis Electronics Limited Accenture UK Limited ESR Technology Limited Denroy Plastics Limited Barnes Aerospace Achieving the Difference LLP Excel (Electronics) Assemblies Limited Dolgarrog Aluminium Limited BAS Aerospace Limited AEI Systems Limited Farsound Engineering Limited Doncasters Limited Centrax Limited AEROid Limited ENL Limited Chemring Group Plc Aeromet International Plc Finmeccanica UK Limited Doncasters Limited Agent Oriented Software Limited Freudenberg Simrit LP ESR Technology Limited Air & Ground Aviation Limited Gardner Group Limited Finmeccanica UK Limited Airbus UK Limited Generation Metals International Limited Freeman & Proctor Limited Aircelle Limited GKN Aerospace Services Limited Freudenberg Simrit LP Aircraft Braking Systems Limited Glenair UK Limited GE Aviation (formerly Smiths Aerospace) Allvac Limited Greene, Tweed & Co Limited GKN Aerospace Services Limited Amphenol Limited Hampson Group plc Glenair UK Limited AmSafe Bridport Ltd Houghton UK PLC Goodrich Corporation UK Apollo Hitech Limited Kingston University Greene, Tweed & Co Limited Apollo Metals Plc Knight Precision Wire Limited Hampson Group plc APPH Limited Magellan Aerospace (UK) Limited Honeywell Aerospace Yeovil Assystem UK Limited Magnesium Elektron IGG Component Technology Limited AviateQ International Limited Maher Limited (Superalloys) Jabil Circuit UK Axis Electronics Limited Marshall of Cambridge Aerospace Limited Kearsley Airways Limited Babcock Engineered Products Meggitt PLC Kingston University BAE SYSTEMS PLC Metallics Limited Magellan Aerospace (UK) Limited Barnes Aerospace Poeton Industries Limited Meggitt PLC Bird & Bird PPG Aerospace, PRC-DeSoto Limited Microfiltrex - a Division of Porvair Filtration Blue Arrow Limited Prodrive Limited Group Limited Böhler-Uddeholm (UK) Limited Quicksource On-Line Limited Moog Controls Limited Bulwell Precision Engineers Limited Rolled Alloys Nicholsons Sealing Technologies Limited Capita Resourcing Limited

.72 .73 index of products & services notes Finmeccanica UK Limited Parametric Technology (UK) Limited Freeman & Proctor Limited Parker Hannifin Limited Freudenberg Simrit LP Pattonair Limited Front Ideas Limited Praxis High Integrity Systems Limited GE Aviation (formerly Smiths Aerospace) PricewaterhouseCoopers LLP Generation Metals International Limited Prodrive Limited GKN Aerospace Services Limited Quicksource On-Line Limited Glenair UK Limited Raytheon Systems Limited Griffonage RLC Engineering Group Limited Hampson Group plc Roke Manor Research Limited Houghton UK PLC Rolled Alloys HS Marston Aerospace Rose Consulting Engineers Limited IBM Maximo (formerly MRO Software UK Ltd) RWD Technologies UK Limited IDS Ingegneria Dei Sistemi (UK) Limited Satair Hardware Limited IGG Component Technology Limited Satelles Limited Ingenia Technology Limited Satyam Computer Services Limited Interchange Solutions Limited Saywell International Limited Inter-Tec Services Limited Scott Jardine Limited J S Chinn Holdings SEA (Group) Limited Jabil Circuit UK Seco Tools (UK) Limited Jefferies Quarterdeck Serco Defence, Science and Technology Jesmond Engineering Limited Sigma Management Development Limited Jonathan Lee Recruitment Limited Sigma Precision Components Limited Jullip International Limited SITA SC Kearsley Airways Limited Sitec Group Kidde Graviner Limited Specialist Technologies Limited Kingston University Spirit AeroSystems (Europe) Limited KPMG Stone Foundries Limited Lockheed Martin UK Limited Sungard Vivista Limited Magellan Aerospace (UK) Limited Thales UK Plc Maher Limited (Superalloys) The Barden Corporation (UK) Limited Marshall of Cambridge Aerospace Limited The Technology Partnership PLC (TTP) Meggitt PLC TIMET UK Limited MEP Limited Titanium Industries UK Limited Messier Services United Kingdom Trelleborg Sealing Solutions UK Solihull Microfiltrex - a Division of Porvair Filtration TRW Conekt Group Limited TWI Limited Moog Controls Limited Ultra Electronics Holdings PLC MSM Group Unipart Logistics Limited M-Tec Recruitment Limited Universal Steels and Aluminium Limited Muirhead Aerospace University of Glasgow Nederman Limited Valtech Limited Newcastle College Virtual Interconnect Limited Northrop Grumman UK Waer Systems Limited Odgers Ray & Berndtson Weston Aerospace Optimised Operations Limited Wragge & Co LLP .74 members'notes index

.76 .77 SBAC salamanca square 9 albert embankment london SE1 7SP tel: +44 (0) 20 7091 4500 fax: +44 (0) 20 7091 4545 May 2007 e-mail: [email protected]

www.sbac.co.uk