Paint Performance Specifications Disclaimer: This color chart is for reference only and is not to be used for final color matching. Shades Complete Louver Product Offering may vary due to the color and resolution of your computer screen and/or your particular color printer output. Greenheck is not responsible or liable for color matches made with online color chart. Use the reference chart below to better understand the performance criteria defined by the American Architectural Manufacturers Association (AAMA). To ensure the highest performance • Stationary • Hurricane Rated Louver Finishes & Colors coatings on louver products, Greenheck recommends specifying an AAMA 2605 compliant coating. • Adjustable • Acoustical Paint Performance Specifications 100% Fluoropolymer (FEVE) 2-Coat 70% Kynar® (PVDF) • Combination Louver/Dampers • Louvered Penthouses Coatings 50% Kynar® / Acroflur® Baked Enamel 3-Coat 70% Kynar® (PVDF) 4-Coat 70% Kynar® (PVDF) • Wind Driven Rain • Thinline Warranty 10 Year (20 Year Optional) 5 Year 1 Year (Aluminum Products Only) Weathering AAMA 2605 AAMA 2604 AAMA 2603 South Florida Exposure 10 Year 5 Year 1 Year Delta E Color Change Delta E Color Change Color Retention Slight Fade <=5 Hunter Units <=5 Hunter Units Gloss Retention Minimum 50% Minimum 30% N/A Chalk Resistance =>8 Rating (6 for Whites) =>8 Rating Slight Chalking Erosion Resistance <10% Film Loss <10% Film Loss N/A Chemical Tests Muriatic Acid Resistance No Blistering or No Blistering or No Blistering or (15 Minute Spot Test) Visual Change Visual Change Visual Change Mortar Resistance No Loss of Film Adhesion No Loss of Film Adhesion No Loss of Film Adhesion (24 Hour Pat Test) or Visual Change or Visual Change or Visual Change Delta E Color Change Delta E Color Change Nitric Acid Resistance N/A <=5 Hunter Units <=5 Hunter Units No Loss of Adhesion, No Loss of Adhesion, No Loss of Adhesion, Detergent Resistance No Blistering, No Significant No Blistering, No Significant No Blistering, No Significant Visual Change Visual Change Visual Change No Blistering or No Blistering or Window Cleaner Resistance Noticeable Change and Noticeable Change and N/A No Removal of Film No Removal of Film Corrosion Salt Spray Resistance 4,000 Hours, => 7 Scribe, 3,000 Hours, => 7 Scribe, 1,500 Hours, => 7 Scribe, (ASTM B117) => 8 Blister => 8 Blister => 8 Blister Aggressive Salt 2,000 Hours Aggressive Spray Resistance N/A N/A Cyclical Corrosion Testing (ASTM G85, Annex A5) 4,000 Hours at 100°F and 3,000 Hours at 100°F and 1,500 Hours at 100°F and 100% Humidity, No Visual 100% Humidity, No Visual 100% Humidity, No Visual Our Commitment Humidity Resistance Change and Few Blisters Change and Few Blisters Change and Few Blisters As a result of our commitment to continuous improvement, Greenheck reserves the right to change Size 8 Size 8 Size 8 specifications without notice. Hardness & Adhesion Specific Greenheck product warranties are located on greenheck.com within the product F Minimum Hardness. F Minimum Hardness. H Minimum Hardness. Dry Film Hardness No Film Rupture. No Film Rupture. No Film Rupture. area tabs and in the Library under Warranties. Accordance with Accordance with Accordance with Film Adhesion ASTM D3359 ASTM D3359 ASTM D3359 No Removal of No Removal of No Removal of Impact Resistance Film from Substrate Film from Substrate Film from Substrate Co-efficient Co-efficient Abrasion Resistance N/A April Value 40 Minimum Value 20 Minimum 00.LVR.1003 R6 4-2020 SP P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com Copyright © 2020 Greenheck Fan Corp. 2020 Disclaimer: This color chart is for reference only and is not to be used for final color matching. Shades may vary due to the color and resolution of your computer screen and/or your particular color printer Standard Colors MicaStandard Colors Colors output. Greenheck is not responsible or liable for color matches made with online color chart. AnodizeMica Colors Colors Anodize Colors Greenheck offers 27 standard colors available in AAMA 2605 compliant coatings (70% Kynar PVDF/ GreenheckGreenheck offersoffers six27 standard colorsmica colors available available in AAMA in AAMA 2605 2605compliant compliant coatings coatings (70% (70%Kynar Kynar PVDF/ The anodize Greenheckprocess creates offers six standard mica colors available in AAMA 2605 compliant coatings (70% Kynar The anodize process creates 100% Fluoropolymer FEVE), AAMA 2604 compliant coatings (50% Kynar/Acroflur) or AAMA 2603 PVDF/100%100% Fluoropolymer Fluoropolymer FEVE), FEVE). AAMA Mica 2604 colors compliant are formulated coatings (50% to reproduce Kynar/Acroflur) the low-gloss or AAMA metallic 2603 an extremelyPVDF/100% hard and Fluoropolymer FEVE). Mica colors are formulated to reproduce the low-gloss metallic an extremely hard and compliant coatings (Baked Enamel). lustercompliant of anodized coatings aluminum (Baked Enamel). in a wider range of dynamic colors. These colors offer many performance durable finishluster on ofaluminum anodized aluminum in a wider range of dynamic colors. These colors offer many performance durable finish on aluminum advantages over conventional anodized finishes including longer warranty duration, superior resistance surfaces. Greenheckadvantages over conventional anodized finishes including longer warranty duration, superior resistance surfaces. Greenheck Clear Anodize 215-R1 or 204-R1 Champagne Anodize Clear Anodize 215-R1 or 204-R1 Champagne Anodize to salt spray, greater color uniformity and better chemical resistance. Additionally, mica coatings are offers seven toindustry salt spray, greater color uniformity and better chemical resistance. Additionally, mica coatings are offers seven industry easier to repair and touch-up than conventional anodized finishes. Organic micas are comprised of standard anodizeeasier colors to repair on and touch-up than conventional anodized finishes. Organic micas are comprised of standard anodize colors on natural minerals and crushed pearlescent that are highly resistant to harmful environmental effects. aluminum louvernatural products minerals and crushed pearlescent that are highly resistant to harmful environmental effects. aluminum louver products Bone White GF102 Ivory 031 Ascot White GF120 Bone White GF102 Ivory 031 Ascot White GF120 that meet the performance that meet the performance requirements of AAMA Light Bronze Anodize Medium Bronze Anodize requirements of AAMA Light Bronze Anodize Medium Bronze Anodize 611. Some degree of color 611. Some degree of color discontinuity within industry discontinuity within industry standard anodize color standard anodize color Dover White AL202 Cambridge White GF110 Herring Bone GF107 ClearDover Anodize White Mica GF209 AL202 BrightCambridge Silver White AL222GF110 SterlingHerring Bone GF201GF107 Clear Anodize Mica GF209 Bright Silver AL222 Sterling GF201 range tolerances can be range tolerances can be Dark Bronze Anodize Extra Dark Bronze Anodize Dark Bronze Anodize Extra Dark Bronze Anodize expected. For better color expected. For better color consistency Greenheck consistency Greenheck recommends AAMA 2605 recommends AAMA 2605 Gun Barrel AL239 Dark Bronze AL238 Asti AL236 Gun Barrel AL239 Dark Bronze AL238 Asti AL236 Sandstone GF112 Pueblo Tan GF116 Rawhide AL215 Sandstone GF112 Pueblo Tan GF116 Rawhide AL215 compliant mica coatings in compliant mica coatings in lieu of anodize. Black Anodize lieu of anodize. Black Anodize Other Options Other Options Mill Aluminum Aluminum Association SpecificationMill Aluminum Aluminum Association Specification Smoke GF104 Sierra Tan GF118 Lindie Bronze AL218 Smoke GF104 Sierra Tan GF118 Lindie Bronze AL218 Anodize AA-M10C21A44 AA-M10C21A41 AA-M10C21A31 Anodize AA-M10C21A44 AA-M10C21A41 AA-M10C21A31 Aluminum in the mill finish state will be commercially Aluminum in the mill finish state will be commercially Class I I II Class I I II smooth and substantially free from blisters, inclusions, smooth and substantially free from blisters, inclusions, Minimum Mil Thickness 0.7 0.7 0.4 Minimum Mil Thickness 0.7 0.7 0.4 voids, slivers and kinks. Slight discontinuity resulting from voids, slivers and kinks. Slight discontinuity resulting from flow and die lines inherent in the extrusion process will Champagne; Light, flow and die lines inherent in the extrusion process will Champagne; Light, Greenheck Louver Greenheck Louver Hampton Brown GF105 Spartan Bronze GF113 Classic Bronze GF108 Hampton Brown GF105 Spartan Bronze GF113 Classic Bronze GF108 Medium, Dark or 215-R1 Clear 204-R1 Clear Medium, Dark or 215-R1 Clear 204-R1 Clear exist. Occasional discontinuities that can be reasonably Anodize Finish Options exist. Occasional discontinuities that can be reasonably Anodize Finish Options Extra Dark Bronze; Black Extra Dark Bronze; Black removed making the surface suitable for finishing operations removed making the surface suitable for finishing operations are acceptable. Although aluminum is naturally resistant to Clear, colorlessare acceptable. and AlthoughClear, aluminumcolorless and is naturally resistant to Clear, colorless and Clear, colorless and Two-step anodize process Two-step anodize process hard oxide aluminum hard oxide aluminum hard oxide aluminum hard oxide aluminum corrosion, its appearance changes as a result of weathering incorporating a colorfast corrosion, its appearance changes as a result of weathering incorporating a colorfast Description finish that resists finish that resists Description finish that resists finish that resists and aging. Aluminum in the