DOCSLIB.ORG

Practical TCP/IP and Ethernet Networking Titles in the Series

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Practical TCP/IP and Ethernet Networking Titles in the Series Practical TCP/IP and Ethernet Networking Titles in the series Practical Cleanrooms: Technologies and Facilities (David Conway) Practical Data Acquisition for Instrumentation and Control Systems (John Park, Steve Mackay) Practical Data Communications for Instrumentation and Control (Steve Mackay, Edwin Wright, John Park) Practical Digital Signal Processing for Engineers and Technicians (Edmund Lai) Practical Electrical Network Automation and Communication Systems (Cobus Strauss) Practical Embedded Controllers (John Park) Practical Fiber Optics (David Bailey, Edwin Wright) Practical Industrial Data Networks: Design, Installation and Troubleshooting (Steve Mackay, Edwin Wright, John Park, Deon Reynders) Practical Industrial Safety, Risk Assessment and Shutdown Systems for Instrumentation and Control (Dave Macdonald) Practical Modern SCADA Protocols: DNP3, 60870.5 and Related Systems (Gordon Clarke, Deon Reynders) Practical Radio Engineering and Telemetry for Industry (David Bailey) Practical SCADA for Industry (David Bailey, Edwin Wright) Practical TCP/IP and Ethernet Networking (Deon Reynders, Edwin Wright) Practical Variable Speed Drives and Power Electronics (Malcolm Barnes) Practical TCP/IP and Ethernet Networking Deon Reynders Pr Eng, BSc BEng, BSc Eng (Elec)(Hons), MBA Edwin Wright MIPENZ, BSc(Hons), BSc(Elec Eng), IDC Technologies, Perth, Australia . Newnes An imprint of Elsevier Linacre House, Jordan Hill, Oxford OX2 8DP 200 Wheeler Road, Burlington, MA 01803 First published 2003 Copyright 2003, IDC Technologies. All rights reserved No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1T 4LP. Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to the publisher British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library ISBN 07506 58061 For information on all Newnes publications, visit our website at www.newnespress.com Typeset and Edited by Vivek Mehra, Mumbai, India ([email protected]) Printed and bound in Great Britain 1 1.1 Data communications 1 1.2 Transmitters, receivers and communication channels 2 1.3 Types of communication channels 4 1.4 Communications channel properties 4 ! " # $ 1.5 Data transmission modes 8 % & ! ' % ( ) % * % 1.6 Encoding methods 12 " + " & + " ,-. ( / " #,-.0 ( / "% +120 "" 34%3 1.7 Error detection 14 $ 5.,/ 2 #! 5 % 2.1 Overview 15 2.2 Network communication 16 ! $ 5! $ & $ 2.3 Types of networks 18 1 ! 5.1#/ ' 6 ! 5.6#/ ' + ! 5.+#/ ) vi Contents ) % 7 ! 5.7#/ * 2.4 The open systems interconnection model 20 8 * 2 .8/ 8 % % % " " " $ 2 " ' #! 5 $ ) & 5 $ * ' 2.5 Interoperability and internetworking 28 2.6 Protocols and protocol standards 30 2.7 IEEE/ISO standards 31 2.8 Network topologies 33 ' 3 00 ' 1 2.9 Bus topology 35 2.10 Star topology 36 2.11 Ring topology 36 2.12 Other types of topology 38 0! ' & ' + ) 2 ) 2.13 Media access methods 40 * 25 * 3 9 ! 5 3.1 IEEE 802.3 CSMA/CD (‘Ethernet’) 43 3.2 Physical layer 44 *3 % % *3 $ *3 2 ' *3 : ) % *3 " ) " 3 % ) 3.3 Signaling methods 50 3.4 Medium access control 50 Contents vii 3.5 Frame transmission 51 3.6 Frame reception 51 3.7 Collisions 52 3.8 MAC frame format 53 3.9 Difference between 802.3 and Ethernet 55 3.10 Reducing collisions 55 3.11 Ethernet design rules 55 1 %" + %" # %" + %$ % + ! 5( %$ " , %$ $ %' 4 : 9 %) 4.1 Achieving higher speed 59 "* 4.2 100Base-T (100Base-TX, -T4, -FX, -T2) 60 999'***3 02 " .;</ " **3 02= 0:= .+&/ " **3 02 .+&/ " % **3 02 " " **3 02 " $ **3 02 "% 4.3 Fast Ethernet design considerations 65 >2 **3 02=42 "% : **3 0:= "% **3 02 "% "" 4.4 Gigabit Ethernet 1000Base-T 67 ? 9 "$ ? 9 + "$ .;</ ") ***3 0= ( ") % ***3 01= 5 ") " ***3 0= ") $ ***3 02 %>2 $* ' ? 9 0 $* 4.5 Gigabit Ethernet design considerations 71 % : $ % ? $ viii Contents 5 24 $ 5.1 The origins of TCP/IP 74 5.2 The ARPA model vs the OSI model 75 5.3 The TCP/IP protocol suite vs the ARPA model 75 6 $' 6.1 Overview 78 6.2 Internet protocol version 4 (IPv4) 79 " $) " 2 '* " '* " #! 5& & '* "% ' "" & ' "$ # ! 5 ' "' 5 ' ") ' "* 0@ '" " '" " 0 .&,/ '$ " ') " 5 ) 6.3 Internet protocol version 6 (IPv6/IPng) 94 " ) " " ! ) " " )% " " )$ "% " )$ "" :! * 6.4 Address resolution protocol (ARP) 103 " * " , * " , *" " ? , *" 6.5 Reverse address resolution protocol (RARP) 106 6.6 Internet control message protocol (ICMP) 107 "" + *$ "" + *' "" @ *) "" , * ""% 2 """ ""$ > Contents ix ""' +@ 6.7 Routing protocols 114 "$ , "$ & "$ % "$ " "$% A ! 00 ! " 6.8 Interior gateway protocols 117 6.9 Exterior gateway protocols (EGP’s) 120 ") 3?0 * 7 ;00. / 7.1 TCP (transmission control protocol) 123 $ 3 $ $ 5 $ @ $% 5! % $" !! % $$ 9 " $' $ $) 2 ' $* + ( ' $ 22 ) 7.2 UDP (user datagram protocol) 131 $ 3 $ 2>& 8 8.1 Introduction 133 8.2 File transfer protocol (FTP) 134 ' :2 ' :2 $ ' :2 $ 8.3 Trivial file transfer protocol (TFTP) 137 ' $ ' : ' 8.4 TELNET (telecommunications network) 140 8.5 RLOGIN (remote login) 143 8.6 NFS (network file system) 143 8.7 DNS (domain name system) 144 '$ # x Contents '$ # &# 8.8 WINS 149 '' ) '' 6# %* '' 6# %* '' 6# %* 8.9 SNMP (simple network management protocol) 150 ') #+ % ') #+ % ') #+ .+3/ % ') #+ % ')% #+ % ')" #+ % ')$ #+ % 8.10 SMTP (simple mail transfer protocol) 154 8.11 POP (post office protocol) 155 8.12 BOOTP (bootstrap protocol) 156 8.13 DHCP (dynamic host configuration protocol) 158 ' &; %' ' &; "* 9 24 " 9.1 Introduction 162 9.2 PING (packet Internet groper) 163 9.3 ARP 166 9.4 NETSTAT 167 9.5 NBTSTAT 167 9.6 IPCONFIG 168 9.7 WINIPCFG 169 9.8 TRACE RouTe 170 9.9 ROUTE 172 9.10 The HOSTS file 173 10 1# $ 10.1 Introduction 174 10.2 Repeaters 175 * 5 $% * 1 9 $% * , $" 10.3 Media converters 176 Contents xi 10.4 Bridges 177 * $$ * 0 $' * ,2 $' * 1 $' 10.5 Hubs 179 *% &5 5 $) *% ! '* *% + '* *% '* *%% & 0 ' *%" + ' *%$ ; ' 10.6 Switches 182 *" 0 0 0 ! ' *" 1 ! ! ' *" :0 ! ' *" ! ' 10.7 Routers 186 *$ 2!0 0 '" *$ '$ *$ 3 '$ *$ , '$ 10.8 Gateways 187 10.9 Print servers 188 10.10 Terminal servers 188 10.11 Thin servers 189 10.12 Remote access servers 189 10.13 Network timeservers 190 11 2 ) 11.1 The Internet and internet 191 11.2 The objectives, background and history of TCP/IP 191 2 2 ) 2 5 24 ) 11.3 The Internet organizational structure 192 343 ) 92:4,2: ) 2 ) 3 ) 11.4 The World Wide Web 193 11.5 An introduction to HTML 194 xii Contents 11.6 HTTP 194 11.7 Java 195 11.8 CGI 196 11.9 Scripting: JavaScript 196 11.10 XML 196 11.11 Server side includes 197 11.12 Perl 197 12 )' 12.1 Connecting a single host to the Internet 198 12.2 Connecting remote hosts to corporate LAN 200 12.3 Connecting multiple hosts to the Internet 200 ** #2 . @ / * * >#= #2 ! * % * 13 2 * 13.1 Introduction 203 13.2 Hardware and software issues 203 13.3 Speed/bandwidth issues 204 13.4 Legal issues 204 13.5 E-mail 205 % 8 +2 *% % 90 ! .! 5 / *% % 90 ! *% % 7 0 *" 13.6 Internet telephony 206 " *" " *" " *$ " *' "% + 4 4! 3= *' "" ! ! *' "$ 8 ! *) "' 1 ! ! *) ") *) 13.7 Paging 209 $ +. / *) $ &B& 5 * Contents xiii 13.8 Voice mail 210 ' 13.9 Fax 211 ) : 40 40 ) : 13.10 Video conferencing 211 * 74 4 * 7! 5 13.11 News 212 #! #! #! C>9#92 13.12 Additional information 214 7 % % : % % 7 ! 5 % " 7 % $ #! % ' % ) 90 % 14 " 14.1 The security problem 216 14.2 Controlling access to the network 218 ) , ) : ! * 14.3 Intrusion detection systems (IDS) 223 ;0 & #! 50 & 14.4 Security management 224 % " 14.5 The public key infrastructure (PKI) 227 % $ % 9 ' % D . 5 / * % D 14.6 References 232 " 4 4 xiv Contents " 9 " : ! A 15 15.1 Background 234 15.2 Legacy automation architectures 234 15.3 The factory of the future 236 % 2! 5 5 " % $ % 9 ! $ % , ! ' %% #! 5 ' %" 2 ) %$ #! 5 .#/ * %' 9 1 %) 9 & 15.4 References 241 % % 24 % 2 % 6 & %% B 16 9 16.1 Network drivers 243 " #! 5 " 16.2 Network card/driver configuration 244 16.3 Network driver interface specification (NDIS) 245 16.4 Open data link interface (ODI) 245 16.5 Packet drivers 246 16.6 Plug and play architecture 246 16.7 PCMCIA interface 246 "$ " "$ + " 16.8 Protocol analyzers 247 17 2 24 ) 17.1 Maintenance and troubleshooting of real TCP/IP networks 249 17.2 Network troubleshooting 250 $ 9 ! 5 % Contents xv $ #! 5( ! % $ ; 5 ! % 17.3 Troubleshooting with TCP/IP
Load more

Recommended publications
  • Redes De Computadores (RCOMP)
    Redes de Computadores (RCOMP) Lecture 03 2019/2020 • Ethernet local area network technologies. • Virtual local area networks (VLAN). • Wireless local area networks. Instituto Superior de Engenharia do Porto – Departamento de Engenharia Informática – Redes de Computadores (RCOMP) – André Moreira 1 ETHERNET Networks – CSMA/CD Ethernet networks (IEEE 802.3 / ISO 8802-3) were originally developed by Xerox in the 70s. Nowadays, ethernet is undoubtedly the most widely used technology in wired LANs. Originally, access control to the medium (MAC - Medium Access Control) was a key issue. The CSMA/CD technique used in ethernet is not ideal, it doesn’t avoid collisions and, as such, results in low efficiency under heavy traffic. The early Ethernet networks were based on a coaxial cable to which all nodes were connected (bus topology), the most important variants were: Thick Ethernet - 10base5 - 10 Mbps / Digital Signal(1) / maximum 500 m bus length Thin Ethernet - 10base2 - 10 Mbps / Digital Signal(1) / maximum 180 m bus length Node Node Node Node Node Node Node Node Node Node (1) base stands for a baseband transmission medium, therefore digital signals must be used. Instituto Superior de Engenharia do Porto – Departamento de Engenharia Informática – Redes de Computadores (RCOMP) – André Moreira 2 ETHERNET networks – Collision Domain CSMA/CD (Carrier Sense Multiple Access with Collision Detection) requires packet collisions to be detected by all nodes before the emission of the packet ends. This introduces limitations on the relationship between the packet’s transmission time and the signal propagation delay. To ensure collision detection by all nodes, there’s minimum packet size of 64 bytes (this sets a minimum transmission time), also there is a maximum segment size (sets the maximum propagation delay).
    [Show full text]
  • MTU and MSS Tutorial
    MTU and MSS Tutorial Dr. E. Garcia, [email protected] Published: November 16, 2009. Last Update: November 16, 2009. © 2009 E. Garcia Abstract – This tutorial covers maximum transmission unit ( MTU ), maximum segment size ( MSS ), PING, NETSTAT, and fragmentation. Expressions relevant to these concepts are systematically derived and explained. Keywords: maximum transmission unit, MTU , maximum segment size, MSS , PING, NETSTAT 1 MTU and MSS As discussed in the IP Packet Fragmentation Tutorial (http://www.miislita.com/internet-engineering/ip-packet-fragmentation-tutorial.pdf ) and elsewhere (1 - 3), the data payload ( DP ) of an IP packet is defined as the packet length ( PL ) minus the length of its IP header ( IPHL ), (Eq 1) whereܦܲ theൌ maximum ܲܮ െ ܫܲܪܮ PL is defined as the Maximum Transmission Unit (MTU) . This is the largest IP packet that can be transmitted without further fragmentation. Thus, when PL = MTU (Eq 2) However,ܦܲ ൌ an ܯܷܶ IP packet െ ܫܲܪܮ encapsulates a TCP packet such that DP = TCPHL + MSS (Eq 3) where TCPHL is the length of the TCP header and MSS is the data payload of the TCP packet, also known as the Maximum Segment Size (MSS) . Combining Equations 2 and 3 leads to MSS = MTU – IPHL – TCPHL (Eq 4) Figure 1 illustrates the connection between MTU and MSS –for an IP packet decomposed into three fragments. Figure 1. Fragmentation example where MTU = PL = pl 1 = pl 2 > pl 3 and DP = dp 1 + dp 2 + dp 3 = PL – IPHL . © 2009 E. Garcia 1 Typically, IP and TCP headers are 20 bytes long. Thus, MSS = MTU – 40 (Eq 5) If IP or TCP options are specified, the MSS is further reduced by the number of bytes taken up by the options (OP), each of which may be one byte or several bytes in size.
    [Show full text]
  • Iethernet W5500 Datasheet Kr
    W5500 Datasheet Version 1.0.6 http://www.wiznet.co.kr © Copyright 2013 WIZnet Co., Ltd. All rights reserved. W5500 The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. WIZnet‘s Hardwired TCP/IP is the market-proven technology that supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols. W5500 embeds the 32Kbyte internal memory buffer for the Ethernet packet processing. If you use W5500, you can implement the Ethernet application just by adding the simple socket program. It’s faster and easier way rather than using any other Embedded Ethernet solution. Users can use 8 independent hardware sockets simultaneously. SPI (Serial Peripheral Interface) is provided for easy integration with the external MCU. The W5500’s SPI supports 80 MHz speed and new efficient SPI protocol for the high speed network communication. In order to reduce power consumption of the system, W5500 provides WOL (Wake on LAN) and power down mode. Features - Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE - Supports 8 independent sockets simultaneously - Supports Power down mode - Supports Wake on LAN over UDP - Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3) - Internal 32Kbytes Memory for TX/RX Buffers - 10BaseT/100BaseTX Ethernet PHY embedded - Supports Auto Negotiation (Full and half duplex, 10 and 100-based ) - Not supports IP Fragmentation - 3.3V operation with 5V I/O signal tolerance - LED outputs (Full/Half duplex, Link, Speed, Active) - 48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch) 2 / 68 W5500 Datasheet Version1.0.6 (DEC 2014) Target Applications W5500 is suitable for the following embedded applications: - Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters - Serial-to-Ethernet: Access Controls, LED displays, Wireless AP relays, etc.
    [Show full text]
  • Automotive Ethernet: the Definitive Guide
    Automotive Ethernet: The Definitive Guide Charles M. Kozierok Colt Correa Robert B. Boatright Jeffrey Quesnelle Illustrated by Charles M. Kozierok, Betsy Timmer, Matt Holden, Colt Correa & Kyle Irving Cover by Betsy Timmer Designed by Matt Holden Automotive Ethernet: The Definitive Guide. Copyright © 2014 Intrepid Control Systems. All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage or retrieval system, without the prior written permission of the copyright owner and publisher. Printed in the USA. ISBN-10: 0-9905388-0-X ISBN-13: 978-0-9905388-0-6 For information on distribution or bulk sales, contact Intrepid Control Systems at (586) 731-7950. You can purchase the paperback or electronic version of this book at www.intrepidcs.com or on Amazon. We’d love to hear your feedback about this book—email us at [email protected]. Product and company names mentioned in this book may be the trademarks of their respective owners. Rather than use a trademark symbol with every occurence of a trademarked name, we are using the names only in an editorial fashion and to the benefit of the trademark owner, with no intention of infringement of the trademark. The information in this book is distributed on an “As Is” basis, without warranty. While every precaution has been taken in the preparation of this book, neither the authors nor Intrepid Control Systems shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the information contained in this book.
    [Show full text]
  • Computer Networking Exercises
    Computer Networking Exercises Antonio Carzaniga Faculty of Informatics USI (Università della Svizzera italiana) Edition 2.4 April 2020 1 ◮Exercise 1. Consider a DNS query of type A within a DNS system containing IN class information. Using boxes to represent servers and lines with labels to represent packets, diagram an iterative request for “www.ban.mcyds.net”. The answer must be authoritative. Label any DNS servers you need to contact using a descriptive label. Label every packet with the essential information. For example, a box may be labeled “authority for .com,” while a packet might be labeled “answer, www.ban.mcyds.net, 192.168.23.45” (10’) Consider the same DNS request specified above. Now create a new diagram showing a recursive request. Once again, the answer must be authoritative. (10’) ◮Exercise 2. Given the utility functions listed below, write the pseudo-code to perform an iterative DNS lookup. dns_query_pkt make_dns_packet(type, class, flags) Creates a new DNS query packet. Flags can be combined via the ‘|’ operator. So for a query that is both authoritative and recursive, one would write: (DNS_AUTH | DNS_RECURSE). Only the DNS_AUTH and DNS_RECURSE flags are valid. Type can be A, MX, NS, or any other valid DNS type. value get_dns_answer(dns_answer_packet, n) Return the value in the nth answer of a dns_answer_pkt packet. For example, in re- ply to a MX lookup for inf.unisi.ch, get_dns_answer(pkt,1) would return the SMTP mail server for the inf.unisi.ch domain. In reply to a NS query it would return the authoritative name server. dns_answer_packet send_and_wait(dns_query_packet, server) Send the given dns_query_packet and wait for a replay from the given DNS server.
    [Show full text]
  • Dynamic Jumbo Frame Generation for Network Performance Scalability
    1 JumboGen: Dynamic Jumbo Frame Generation For Network Performance Scalability David Salyers, Yingxin Jiang, Aaron Striegel, Christian Poellabauer Department of Computer Science and Engineering University of Notre Dame Notre Dame, IN. 46530 USA Email: {dsalyers, yjiang3, striegel, cpoellab}@nd.edu Abstract— Network transmission speeds are increasing at a there is a fixed amount of overhead processing per packet, significant rate. Unfortunately, the actual performance of the it is a challenge for CPUs to scale with increasing network network does not scale with the increases in line speed. This speeds [2]. In order to overcome this issue, many works on is due to the fact that the majority of packets are less than or equal to 64 bytes and the fact that packet size has not scaled with high performance networks, as in [3] and [4], have advocated the increases in network line speeds. This causes a greater and the use of a larger MTU length or jumbo frames. These works greater load to be placed on routers in the network as routing show that the performance of TCP and the network in general decisions have to be made for an ever increasing number of can significantly improve with the use of jumbo-sized packets. packets, which can cause increased packet delay and loss. In Unfortunately, the benefits of jumbo frames are limited for order to help alleviate this problem and make the transfer of bulk data more efficient, networks can support an extra large several reasons. First, the majority of packets transferred are MTU size. Unfortunately, when a packet traverses a number of 64 bytes or less.
    [Show full text]
  • Exploring Usable Path MTU in the Internet
    Exploring usable Path MTU in the Internet Ana Custura Gorry Fairhurst Iain Learmonth University of Aberdeen University of Aberdeen University of Aberdeen Abstract—To optimise their transmission, Internet endpoints methodologies and tools [7] [8], providing an up-to-date need to know the largest size of packet they can send across PMTUD behaviour report for both IPv4 and IPv6. a specific Internet path, the Path Maximum Transmission Unit We include an in-depth exploration of server and client (PMTU). This paper explores the PMTU size experienced across the Internet core, wired and mobile edge networks. advertised Maximum Segment Size (MSS), taking advantage Our results show that MSS Clamping has been widely deployed of existing measurement platforms, MONROE [9] and RIPE in edge networks, and some webservers artificially reduce their Atlas [10], and using or extending existing tools Netalyzr [11] advertised MSS, both of which we expect help avoid PMTUD and PATHspider [12]. failure for TCP. The maximum packet size used by a TCP We also look at ICMP quotation health and analyze a connection is also constrained by the acMSS. MSS Clamping was observed in over 20% of edge networks tested. We find a large number of ICMP quotations from a previous large- significant proportion of webservers that advertise a low MSS scale measurement campaign. These results provide important can still be reached with a 1500 byte packet. We also find more insight to inform the design of new methods that can robustly than half of IPv6 webservers do not attempt PMTUD and clamp discover the PMTU for UDP traffic where there are currently the MSS to 1280 bytes.
    [Show full text]
  • Europeancommission—FP7
    European Commission — FP7 Title: Network systems analysis and preliminary development report Work Package: WP2 Version: 1 Date: November 1. 2013 Pages: 30 Project acronym: RITE Author: David Ros Project number: 317700 Work package: Network and interaction Co-Author(s): Iffat Ahmed, Amadou Bagayoko, Anna Brunstrom, Gorry Fairhurst, Carsten Griwodz, David Hayes, Naeem Khademi, Deliverable number and name: Andreas Petlund, Ing-Jyh Tsang, D2.1: Network systems analysis and preliminary devel- Michael Welzl opment report To: Rüdiger Martin Project Officer Status: Confidentiality: [] Draft [ X ] PU — Public [] To be reviewed [] PP — Restricted to other programme participants [] Proposal [] RE — Restricted to a group [ X ] Final / Released to CEC [] CO — Confidential Revision: (Dates, Reviewers, Comments) Contents: Report describing the outcome of the network systems analysis, corresponding to Task 2.1. The most promising avenues for further investigation and prototype development are identified. The report also includes initial results from simulations and prototype developments in Task 2.2 and Task 2.3. Contents RITE: Reducing Internet Transport Latency No. 317700 Abbreviations 1 1 Introduction 3 1.1 Analysis breakdown and document structure ......................... 3 2 Analysis of the causes of delay in broadband access and aggregation networks 4 2.1 Transmission delay due to physical and link layer mechanisms ................ 4 2.1.1 Digital subscriber line (DSL) .............................. 5 2.1.2 Cable ........................................... 6 2.1.3 Fiber ........................................... 7 2.1.4 Wireless .......................................... 7 2.2 Traffic prioritisation and queue management .......................... 8 2.3 Recommendations on network buffering and Active Queue Management .......... 9 3 Interaction of deployed congestion-control algorithms with latency-sensitive flows in network buffers 10 3.1 Multimedia-unfriendly TCP congestion control and home gateway queue management .
    [Show full text]
  • Ethernet for the ATLAS Second Level Trigger
    Ethernet for the ATLAS Second Level Trigger by Franklin Saka Royal Holloway College, Physics Department University of London 2001 Thesis submitted in accordance with the requirements of the University of London for the degree of Doctor of Philosophy Abstract In preparation for building the ATLAS second level trigger, various networks and protocols are being investigated. Advancement in Ethernet LAN technology has seen the speed increase from 10 Mbit/s to 100 Mbit/s and 1 Gigabit/s. There are organisations looking at taking Ethernet speeds even higher to 10 Gigabit/s. The price of 100 Mbit/s Ethernet has fallen rapidly since its introduction. Gigabit Ethernet prices are also following the same pattern as products are taken up by customers wishing to stay with the Ethernet technology but requiring higher speeds to run the latest applications. The price/performance/longevity and universality features of Ethernet has made it an interesting technology for the ATLAS second level trigger network. The aim of this work is to assess the technology in the context of the ATLAS trigger and data acquisition system. We investigate the technology and its implications. We assess the performance of contemporary, commodity, off-the-shelf Ethernet switches/networks and interconnects. The results of the performance analysis are used to build switch models such that large ATLAS-like networks can be simulated and studied. Finally, we then look at the feasibility and prospect for Ethernet in the ATLAS second level trigger based on current products and estimates of the state of the technology in 2005, when ATLAS is scheduled to come on line.
    [Show full text]
  • Measuring the Usable Maximum Packet Size Across Internet Paths: How Can We Make PMTUD Work?
    Measuring the usable maximum packet size across Internet paths: How can we make PMTUD work? Ana Custura Iain Learmonth Gorry Fairhurst University of Aberdeen, Scotland, UK, EU Wave Farm Design - Pelamis-Based Wave Energy Converter Kacper Barski 51228308 Michael Boddie 51228343 Peter Bola-Okerinde 51231253 Aleksandrs Klamaznikovs 51231254 Peter Meehan 51228320 David Wells 51229317 School of Engineering University of Aberdeen Under the supervision of: Dr Masood Hajian and Dr Amir Siddiq A project submitted in partial fulfilment of the requirements of the award of Master of Engineering at the University of Aberdeen. Academic Year 2016/2017 It’s “good” to send big packets PMTU Discovery (PMTUD) Network layer mechanism to determine the PMTU using PTB Wave Farm Design - Pelamis-Based Wave Energy Converter Kacper Barski 51228308 Michael Boddie 51228343 Peter Bola-Okerinde 51231253 Aleksandrs Klamaznikovs 51231254 Peter Meehan 51228320 David Wells 51229317 School of Engineering University of Aberdeen Under the supervision of: Dr Masood Hajian and Dr Amir Siddiq A project submitted in partial fulfilment of the requirements of the award of Master of Engineering at the University of Aberdeen. Academic Year 2016/2017 It’s “good” to send big packets PMTU Discovery (PMTUD) Network layer mechanism to determine the PMTU using PTB 1500 Wave Farm Design - Pelamis-Based Wave Energy Converter Kacper Barski 51228308 Michael Boddie 51228343 Peter Bola-Okerinde 51231253 Aleksandrs Klamaznikovs 51231254 Peter Meehan 51228320 David Wells 51229317 School of Engineering University of Aberdeen Under the supervision of: Dr Masood Hajian and Dr Amir Siddiq A project submitted in partial fulfilment of the requirements of the award of Master of Engineering at the University of Aberdeen.
    [Show full text]
  • Analysis of Fiwi Networks to Mitigate Packet Reordering
    International Conference on Recent Trends in Computational Methods, Communication and Controls (ICON3C 2012) Proceedings published in International Journal of Computer Applications® (IJCA) Analysis of FiWi Networks to Mitigate Packet Reordering G.Sivakumar A.V.Ramprasad M.E, Student, Communication Systems Professor, Communication Systems K.L.N College of Engineering K.L.N College of Engineering Pottapalayam, Madurai Pottapalayam, Madurai ABSTRACT In an integrated fiber and wireless (FiWi) access networks, multipath routing may be applied in the wireless subnetwork to improve throughput. Because of different delays along multiple paths, packets may arrive at the destination out of order, which may cause TCP Performance degradation. As all traffic in a FiWi network is sent to the Optical line terminal (OLT), the OLT serves as a convergence node which naturally makes it possible to re-sequence packets at the OLT before they are sent to the internet. However the challenge is that OLT must re-sequence packets effectively with a very small delay to avoid a performance hit. To overcome this problem, Scheduling Algorithms (FIFO, Priority Queuing, DRR, and MDRR) at Optical Line Terminal (OLT) is used effectively to reduce Packet Reordering and to improve TCP Performance. Simulation results show that MDRR scheduling algorithm is effective in reducing the packet reordering. General Terms Multipath Routing, TCP Performance, Scheduling Algorithm. Figure 1. A Conceptual Architecture of FiWi Networks. cwnd unnecessarily small, which would severely affect the Keywords TCP Performance. EPON, FiWi, WMN, Packet re-sequencing, MDRR, Packet Reordering. A scheduling algorithm at the OLT, that aims to re-sequence the packets of each flow to facilitate in-order arrivals at the 1.
    [Show full text]
  • Network Topologies and LAN Design
    CH01.book Page 99 Friday, January 14, 2000 2:07 PM C H A P T E R 4 Network Topologies and LAN Design This chapter reviews the topologies used in network design and covers the technologies and design approaches used when designing a local-area network (LAN). The hierarchical, redundant, and secure topology models are covered. Technologies like Ethernet, Fast Ethernet, FDDI, and Token Ring are also covered in this chapter. This chapter also discusses the characteristics of repeaters, bridges, switches, and routers, as well as how to apply these devices in a LAN environment. Finally, this chapter covers the Cisco products used in local-area networks. “Do I Know This Already?” Quiz The questions in the following quiz are designed to help you gauge how well you know the material covered in this chapter. Compare your answers with those found in Appendix A, “Answers to Quiz Questions.” If you answer most or all of the questions thoroughly and correctly, you might want to skim the chapter and proceed to the “Q&A” and “Case Studies” sections at the end of the chapter. If you find you need to review only certain subject matter, search the chapter for only those sections that cover the objectives you need to review and then test yourself with those question again, as well as the “Q&A” and “Case Studies” questions. If you find the following questions too difficult, read the chapter carefully until you feel you can easily answers these and the “Q&A” and “Case Studies” questions. 1 What OSI layer does a bridge operate? ____________________________________________________________________
    [Show full text]