32” HD Ready LED TV L32HE13

Instruction Manual

L32HE13_IB.indd 1 22/07/2013 12:10 L32HE13_IB.indd 2 22/07/2013 12:10 Contents

Safety Warnings...... 5 Preparation...... 7 Unpacking the TV...... 7 Installing / Removing the Base Stand...... 8 Mounting the TV to a Wall...... 8 Front / Right Side View and Controls...... 9 Rear View and Sockets...... 10 Installing Batteries in the Remote Control...... 11 Remote Control Operation Range...... 11 Remote Control...... 12 Initial Setup...... 14 Turning the TV On for the First Time...... 14 −− Target Region Setting...... 15 −− Connecting an Analogue Device...... 15 −− Channel Selection ...... 16 −− Display Channel Information...... 16 −− Volume Adjustment...... 16 Adjusting the Picture Settings...... 16 −− Aspect Ratio...... 18 Sound Setting...... 19 EPG (Electronic Programme Guide) (DTV Mode)...... 20 −− Switch On / Off EPG...... 20 −− Select a Programme...... 20 Time Shift Recording onto a USB Storage Device...... 21 Recording DTV Programmes onto a USB Storage Device...... 22 Timer Programming...... 23 Playing Recorded Programmes...... 24 Digital Teletext (DTV Mode)...... 25 −− Teletext within Digital Service...... 25 Listening to the Radio...... 25 −− Signal Information (DTV Mode)...... 26 −− CI (Common Interface) (DTV Mode)...... 26 −− Software Update (Over Air Download) (DTV Mode)...... 27 −− Software Update (USB)...... 28 Time Settings...... 29 Option Setting...... 31 −− OSD Language...... 31 −− TT Language...... 31 −− Audio Language (DTV Mode)...... 31 −− Subtitle Language (DTV Mode)...... 32 −− Hearing Impaired...... 32 −− PVR File System (DTV Mode)...... 33 −− Blue Screen...... 34 −− HDMI CEC (Consumer Electronics Control) (HDMI Mode)...... 34 −− Restore Factory Default...... 35 Lock Setting...... 36 −− Lock System...... 36 −− Set Password...... 37 −− Block Channel...... 37 −− Parental Guidance...... 38 −− Key Lock...... 39

L32HE13_IB.indd 3 22/07/2013 12:10 Connecting a USB Storage Device...... 39 Viewing Photos...... 40 Listening to Music...... 41 Viewing Movies...... 42 My Text...... 43 Play Recorded Programme ...... 44 Maintenance...... 45 Hints and Tips...... 46 YPbPr Mode...... 48 PC Mode...... 48 HDMI Mode ...... 48 Specifications...... 49

L32HE13_IB.indd 4 22/07/2013 12:10 Safety Warnings Safety Warnings

• Read all the instructions carefully before using the unit Safety and keep them for future reference. • Always disconnect the unit from the mains supply • Retain the manual. If you pass the unit onto a third before connecting / disconnecting other devices or party make sure to include this manual. moving the unit. • Check that the voltage marked on the rating label • Unplug the unit from the mains socket during a matches your mains voltage. lightning storm. Damage Mains Cable • Please inspect the unit for damage after unpacking. • Make sure the unit or unit stand is not resting on top of the mains cable, as the weight of the unit may damage • Do not continue to operate the unit if you are in any the mains cable and create a safety hazard. doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and • If the mains cable is damaged it must be replaced consult your dealer. by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Location of Unit • The unit must be placed on a flat stable surface and Interference should not be subjected to vibrations. • Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may • Do not place the unit on sloped or unstable surfaces as adversely affect the operating performance of the unit, the unit may fall off or tip over. and cause a distorted picture or sound. • The mains socket must be located near the unit and should be easily accessible. Optimum Viewing • View the unit in moderate light to prevent eye strain. It • This unit is designed for indoor, domestic use only. is recommended to watch the unit from a distance Temperature 3-7 times that of the screen height. • Avoid extreme degrees of temperature, either hot or LCD Screen cold. Place the unit well away from heat sources such • The LCD screen is manufactured using high-precision as radiators or gas / electric fires. technology. However, some tiny black points and / • Avoid exposure to direct sunlight and other sources of or bright points (red, blue or green in colour) may heat. constantly appear on the LCD screen. These points Naked Flames are generated in the manufacturing process and are • Never place any type of candle or naked flame on the normal. top of or near the unit. Screen Burn Moisture • A characteristic of Plasma and TV Panels is that • To reduce the risk of fire, electric shock or product displaying the same image for a long time may cause damage, do not expose this unit to rain, moisture, a permanent after-image to remain on the screen. This dripping or splashing. No objects filled with liquids, is called screen burn. Most pictures shown on the unit such as vases, should be placed on the unit. will be constantly moving and fill the screen. • Examples of images that you need to watch out for are • If you spill any liquid into the unit, it can cause serious as follows (this is not an all-inclusive list): damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. 1. Black Bars: If black bars appear at the left / right or top / bottom of the screen, it is recommended to Ventilation change the format so that the picture fills the entire • To prevent the risk of electric shock or fire hazard screen. due to overheating, ensure that curtains and other 2. TV Channel Logos: e.g. Shopping channel logos materials do not obstruct the ventilation vents. and pricing displays - especially if they are bright • Do not install or place this unit in a bookcase, built-in and stationary. Moving or low-contrast graphics are cabinet or in another confined space. Ensure the unit is less likely to cause ageing of the screen. well ventilated. 3. Time Displays • Make sure that there is a gap of at least 10 cm on both 4. Teletext: Do not view a stationary page for long sides and a gap of 20 cm at the top. periods of time. 5. TV Menus

20 cm 6. Pause Mode: Do not leave the screen in pause mode for long periods of time, e.g. when watching videos. 10 cm 10 cm 10 cm • To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.

L32HE13_IB.indd 5 22/07/2013 12:10 Standby Service • The button on the remote control does not switch • To reduce the risk of electric shock, do not remove off the unit completely. The unit will continue to draw screws. The unit does not contain any user-serviceable electricity from the mains supply while in standby. In parts. Please leave all maintenance work to qualified the interests of safety and to avoid unnecessary energy personnel. consumption, never leave the unit in standby while • Do not open any fixed covers as this may expose unattended for long periods of time, e.g. overnight, dangerous voltages. while on holiday or while out of the house. Disconnect the mains plug from the mains socket. Maintenance • Ensure to unplug the unit from the mains socket before Batteries cleaning. • Batteries used in the remote control for this unit • Do not use any type of abrasive pad or abrasive are easily swallowed by young children and this is cleaning solutions as these may damage the unit’s dangerous. surface. • Keep loose batteries away from young children and • Do not use liquids to clean the unit. make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a • The wall socket plug is used as a disconnect device, the cell has been swallowed. disconnect device should be readily accessible. • Please dispose of batteries correctly by following the • This equipment is a Class II or double insulated guidance in this manual. electrical appliance. It has been designed in such a way that it does not require a safety connection to • The batteries shall not be exposed to excessive heat electrical earth. such as sunshine, fire or the like. Supervision • Children should be supervised to ensure that they do To prevent the spread of fire, keep not play with the unit and the remote control. candles or other open flames away • Never let anyone especially children push anything into the holes, slots or any other openings in the case - from this product at all times. this could result in a fatal electric shock. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

L32HE13_IB.indd 6 22/07/2013 12:10 Preparation

Thank you for purchasing your new Logik 32” HD Ready LED TV. Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual so that you fully understand these features. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included:

HDMI PC

R.VEAL

SIZE

TV TV Stand Remote Control / AAA Batteries x 2

Red Red

Blue White

Green Yellow

Screw x 5 Component Adapter Cable Composite Adapter Cable (YPbPr) (AV)

Connecting the Aerial Connecting to the Mains Socket Quick Start Guide Instruction Manual Connect one end of the RF coaxial cable to the aerial socket on the wall 1. Connect the mains cable to the mains socket after you have and the other end of the cable to the AERIAL IN socket at the rear right completed all the connections. bottom view of your TV. 2. In standby mode, press the button on the remote control to turn the TV on. The red LED indicator will turn blue. 32” HD Ready LED TV L32HE13 32” HD Ready LED TV To the mains socket L32HED13 (with DVD Player) HDMI 1 In HDMI 2 In SCART PC PC-RGB In RF In L32HE13 Audio In

Turning On and Tuning In the TV

Please select an OSD Language Target Region Setting During tuning your TV may have received English Español Français signals from more than one transmitter. If this Please ensure aerial is plugged in!! has occurred the Target Region Setting screen will be displayed. This will enable you to select Then press OK button to start the correct regional transmission for the local Deutsch Português Italiano news service that you require. 1. Press the OK button to confirm the Country Code, this will highlight the Primary Region England. 1. The first time you turn the TV on, it will go 2. Press the buttons to select your 2. Press the OK button to highlight Secondary straight into the First Time Installation menu. desired language to be displayed on the Region and press the buttons to select menu. The default on-screen menu language Please ensure the aerial is plugged in and your preferred option (if available). is set as English. Press the OK button to Unpacking Installing the Base Stand then press the OK button. confirm. 3. Press the OK button to confirm, and Tertiary Region will be highlighted. Press the buttons to select the your preferred option Remove all packaging from the TV. Retain the packaging. 1. Disconnect all cables connected to the TV. (if available). If you dispose of it please do so according to local regulations. 2. Lay the TV down on a flat surface ideally on the edge of a table so the Tune Type DTV 4. Press the OK button to confirm. The main TV base of the TV slightly overhangs the edge of the table, with the back menu will be briefly displayed. side facing up. Please make sure a soft cushioned material (such as Channel Tuning TV Stand a dry bath towel or thick piece of foam) is placed beneath the screen. UK Finland Hungary Your TV is now fully tuned in. TV : 0 Channel Remote Control/AAA Batteries x 2 3. To install the TV stand, place the stand into the stand DTV : 0 Channel Screw x 5 Czech France Italy recess on the back of Radio : 0 Channel Target Region Setting Component Adapter Cable (YPbPr) the TV. Data : 0 Channel Country Code GBR Composite Adapter Cable (AV) Denamrk Germany Netherlands 1 %... 471.25 MHz (DTV) Primary Region England Instruction Manual Table Menu Please press MENU key to skip Secondary Region London

Cushioned Tertiary Region material 3. To select the country option press the 4. Channel tuning will commence. This operation buttons. Press the OK button may take up to 10 minutes. The display will Operating Your Remote Control to confirm. show the progress of the tuning and the 4. Secure the stand using the 5 screws provided. number of channels found.

screw in 1. Press and lift the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with Well done, your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these features, the (+) and ( - ) ends indicated please take some time to read the instruction manual provided with your TV. in the battery compartment. If after reading the instruction manual you have additional questions related to the use of your TV please call our UK Call Centre on 0844 561 1234. 3. Close the battery compartment Screws x 5 Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm. cover. QSG-L32HE13_HED13-130411V2

L32HED13_QSG.indd 1 11/04/2013 17:45 Instruction Manual Quick Start Guide

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

L32HE13_IB.indd 7 22/07/2013 12:10 Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface ideally on the edge of a table so the base of the TV slightly overhangs the edge of the table, with the back side facing up. Please make sure a soft cushioned material (such as a dry bath towel or thick piece of foam) is placed beneath the screen. Table 3. To install the TV stand, place the stand into the stand recess on the back of the TV. Cushioned material

4. Secure the stand using the 5 screws provided. screw in

Screws x 5

Mounting the TV to a Wall

Remove the stand assembly before mounting the TV onto the wall.

1. To remove the stand assembly, untighten the 5 screws unscrew holding the stand assembly to the rear of the TV. Slide the stand assembly out.

Keep all the spare screws should you want to use the stand assembly option.

Screw x 5

2. Mounting on the wall. This TV is designed to be wall-mounted with a standard 100 mm x 100 mm 100 mm mounting kit (sold separately) designed for flat-panel 100 mm TVs. Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections before mounting on to the wall. Four mounting holes (size M6 screw)

• Please read this instruction manual carefully while setting up your TV. • If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

L32HE13_IB.indd 8 22/07/2013 12:10 Front / Right Side View and Controls

3 4

1 2

Item Description

Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby 1 POWER LED mode. The LED will illuminate blue and then blink red and blue confirming that a timer recording programme has started in the standby mode.

Receives IR signals from the remote control. 2 IR (Infrared Receiver) Do not put anything near the sensor, as its function may be affected.

Press to select among different input signal sources: 3 SOURCE DTV / ATV / AV / SCART / YPBPR / HDMI 1 / HDMI 2 / HDMI 3 / PC / USB. Confirmed the selection on OSD menu.

4 MENU Displays the OSD (on screen display) menu.

Adjusts the volume. 5 V + / – Press to select and adjust a setting in the OSD menu.

6 CH + / – Press to select a channel or select a sub-menu from the OSD menu.

7 STANDBY Switches the TV on or into standby mode.

L32HE13_IB.indd 9 22/07/2013 12:10 Rear View and Sockets

YPbPr 5

AV IN AV 6 CI CARD IN CARD CI

1 HDMI 3 In 3 HDMI

USB 8

Out 9 Coaxial

PC HDMI 1 In HDMI 2 In SCART Audio In PC-RGB In RF In

1 2 3 4

Item Description

Connects to a High-Definition (HD) signal output device, such as a set-top box, blu-ray 1 HDMI 1 / HDMI 2 / HDMI 3 disc player or AV receiver.

2 SCART Connects to a VCR, DVD Player, or other AV device with a SCART output socket.

3 PC-RGB In / PC AUDIO In Connects to a computer or other devices with a VGA interface.

4 RF In Connects to the aerial socket on the wall with the RF coaxial cable.

Connects to a DVD player, Digital Set-Top-Box, or other AV devices with component 5 YPbPr (YPbPr) video and audio output sockets.

6 AV IN Connects to the Composite output sockets on external video devices.

7 CI CARD In Allows the insertion of a Common Access Module.

Allows the insertion of a USB storage device to play video, audio, photo and text files 8 USB (USB mode) and record DTV programmes on to a USB storage device.

9 Coaxial Out Connects to the audio socket on the digital/standard 5.1 audio system.

L32HE13_IB.indd 10 22/07/2013 12:10 Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

Handling the Batteries Handling the Remote Control • Improper or incorrect use of batteries may cause • Take care of your fingernails when you press and corrosion or battery leakage, which could cause hold the battery release tab. fire, personal injury or damage to property. • Do not drop or cause impact to the remote control. • Only use the battery type indicated in this manual. • Do not spill water or any liquid on the remote • When the batteries are exhausted, the remote will control. not function. Replace both batteries at the same • Do not place the remote control on a wet object. time with new ones. • Do not place the remote control under direct • Do not install new batteries with used ones and do sunlight or near sources of excessive heat. not mix different types of batteries. • Remove the battery from the remote control • Do not dispose of used batteries as domestic when not in use for a long period of time, as it waste. Dispose of them in accordance with local could cause corrosion or battery leakage and may regulations. result in physical injury and/or property damage including fire.

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. The operating distance may vary depending on the brightness of the room.

30° 30° 5M

HDMI

L32HE13_IB.indd 11 22/07/2013 12:10 Remote Control

1. Switch the TV between on and standby mode. 2. MUTE Mute and restore your TV sound. 1 2 3. 0-9 Number Button • Press to select a programme. (DTV / RADIO mode) 4. -/-- Feature not available. 3 5. RECALL Return to the previous viewing channel. (DTV mode) 6. TV GUIDE Display the EPG (Electronic Programme Guide). (DTV mode) 7. VOL + / – 4 5 Adjust the volume. 6 8. CH + / – Select a channel. 7 8 9. FAV Display the favourite channel list. (DTV mode) 10. DTV (TV/RADIO) 10 9 A short-cut to switch input source to TV / Digital radio channels. HDMI PC 12 11 (DTV mode) 13 11. HDMI 14 15 A short-cut to switch input source to HDMI 1, 2, or 3. 12. PC 16 A short-cut to switch input source to PC. 17 18 13. USB A short-cut to switch input source to TV / Digital radio channels. (DTV mode) 14. SOURCE Select among the different input signal sources: DTV / ATV / AV / SCART / YPBPR / HDMI 1 / HDMI 2 / HDMI 3 / PC / USB. 15. INFO R.VEAL

• Display the present channel information such as the current SIZE time and channel name. (DTV mode) 16. Allow you to navigate the OSD menus and adjust the system settings to your preference. OK • Confirm the selection in the OSD menus. • Display channel list. (DTV / RADIO mode) 17. MENU • Display the OSD (On Screen Display) menu. • Return to the previous menu in the OSD menus. 18. Exit Exit the OSD menu.

L32HE13_IB.indd 12 22/07/2013 12:10 19. SLEEP Set the TV sleep timer: OFF / 10 / 20 / … / 180 / 240 min. 20. ASPECT Watch the screen in various formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Subtitle. 21. AUDIO • Switches between the audio languages (only applicable when the TV programme / disc has this features). (DTV ) 22. SUBTITLE • Select subtitles which are broadcast with the programme. (DTV mode) 23. To skip to the beginning of the previous track / photo. (USB mode) 24. Record the current programme. (DTV mode) 25. To skip to the beginning of the next track / photo. (USB mode) 26. To stop the playback or recording. (DTV / USB mode) 27. To reverse playback rapidly. (USB mode) HDMI PC 28. REC LIST Display the record list. (DTV mode) 29. To advance playback rapidly. (USB mode) 30. • To start the timeshift playback. (DTV mode) • To start playback or pause. (DTV mode) 19 21 31. S.MODE 20 22 Short cut to preset sound modes. 23 25 32. P.MODE 24 26 Short cut to preset picture modes. 27 29 33. INDEX 28 30 R.VEAL Function not available. 31 33 32 34 34. R.VEAL SIZE Function not available. 35 37 35. TEXT 36 38 Turn on and off the teletext function. (DTV mode) 36. TEXT HOLD 39 Freeze a multi-page passage on screen in teletext. (Feature not available) 37. DISPLAY Switches the display on/off. (Radio mode) 38. SIZE Function not available. 39. Coloured buttons Access the TELETEXT items ( DTV mode) or menu options.

L32HE13_IB.indd 13 22/07/2013 12:10 Initial Setup Turning the TV On for the First Time

1. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the AERIAL IN socket at the rear right bottom view of your TV. OR Do not connect the TV to the mains supply until you have completed all the connections. RF coaxial cable (not included)

HDMI 1 In HDMI 2 In SCART PC PC-RGB In RF In Audio In

2. Connect the mains cable to the mains socket after you have completed all the connections.

3. In standby mode, press the button on the remote control to turn the TV on. The red LED indicator will turn blue. To the mains socket

• Always disconnect the TV from the mains socket when not in use for a long period of time. • The STANDBY button on the front right side panel of the TV or the button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket.

4. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press the OK button. (If you have already installed the TV using the Quick Start Guide, please skip this section). Please ensure aerial is plugged in!!

Then press OK button to start

5. Press the buttons to select your desired language to be Please select an OSD Language displayed on the menu. The default on-screen menu language is set as English. Press the OK button to confirm. English Español Français

Deutsch Português Italiano

6. To select the country option press the buttons. Press the OK Tune Type DTV button to confirm.

UK Finland Hungary

Czech France Italy

Denamrk Germany Netherlands

Menu 14

L32HE13_IB.indd 14 22/07/2013 12:10 7. Channel tuning will commence. This operation may take up to 10 Channel Tuning minutes. The display will show the progress of the tuning and the number of channels found. DTV : 0 Channel Radio : 0 Channel If you want to exit the tuning menu, press the MENU button to interrupt the tuning process. A pop-up screen will be displayed, press the button. DATA : 0 Channel

8. After tuning is complete, the channels are arranged in a preset order. 1 %... UHF CH 1 (DTV) If you wish to skip channels, modify the preset order or add them as favourite channel, select Channel Edit under the Channel menu. Please press MENU key to skip

Target Region Setting Target Region Setting During tuning your TV may have received signals from more than one Country Code GBR transmitter. If this has occurred the Target Region Setting screen will be displayed. This will enable you to select the correct regional transmission for Primary Region England the local news service that you require. Secondary Region London 1. Press the OK button to confirm the Country Code, this will highlight the Primary Region England. Tertiary Region

2. Press the OK button to highlight Secondary Region and press the buttons to select your preferred option (if available).

3. Press the OK button to confirm, and Tertiary Region will be highlighted. Press the buttons to select the your preferred option (if available).

4. Press the OK button to confirm. The main menu will be briefly displayed. CHANNEL Your TV is now fully tuned in. PICTURE

SOUND Country Code This will be shown as GBR for the UK. TIME This will show the regional country (England, Wales, OPTION Primary Region Scotland, NI). LOCK EXIT This will allow you to set the region for your local Secondary Region news service on BBC and ITV (London, Beds and Cambs etc). You may receive signals from more than one Tertiary Region transmitter within the Secondary Region, (e.g Beds and Cambs may have Luton or Sandy Heath).

Connecting an Analogue Device If you have connected an analogue device such as a video recorder via the aerial socket on you TV you will have to tune it in using ATV mode. Ensure the device is switch on before you start the tuning process. ATV Manual Tuning Channel Edit 1. Press the SOURCE button, press the buttons to select ATV and Software Update(OAD) Off press OK. Software Update(USB)

2. Press the MENU button, then press the buttons to select CHANNEL and press OK.

3. Press the buttons to select ATV MANUAL TUNING and press OK. ATV Manual Tuning

4. Press the buttons to select SEARCH then press one of the Current CH 1

buttons to start the search for your device. The search will automatically Colour System PAL

stop when the device is found. Sound System I

Fine - Tune 470.25 MHz 5. Press the EXIT button to exit the menu. AFC Off

L32HE13_IB.indd 15 22/07/2013 12:10 Channel Selection • Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.

Alternative Press the OK button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel. • If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to Block Channel for details). • Press the FAV button to view the Favourite List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel, the Favourite List will be blank unless you have added your favorites. • Press the button to return to the previously viewed channel.

Display Channel Information • Press the INFO button to view the current information.

Volume Adjustment • Press the V + or – button on the right side panel of the TV or the VOL + or – button on the remote control to adjust the volume. • If you wish to switch the sound off, press the MUTE button. Press the MUTE button again or the VOL + or – button to resume audio listening.

Adjusting the Picture Settings

Allows you to set your preferred picture mode.

1. Press the MENU button and then press the buttons to select the

PICTURE menu and then press the OK button. CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select the following picture options and then press the OK button. Picture Mode Standard Contrast 50 • Press the buttons to adjust the levels in the menus. Brightness 50 Colour 50 Tint 50 Sharpness 50 Colour Temp Normal Noise Reduction Off SCREEN

L32HE13_IB.indd 16 22/07/2013 12:10 Picture Mode Select among picture mode: Standard / Mild / Personal / Dynamic. Picture Mode The default setting is Standard. Select Personal if you want to adjust Dynamic the picture settings yourself. Standard Mild

Personal

BACK EXIT MENU

Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode) Brightness Increases or decreases the amount of white in the picture. (for Personal mode) Colour Controls the colour intensity. (for Personal mode) Tint (For NTSC Adjusts the balance between red and green levels. format) (Tint is only available for NTSC signal input via the SCART or AV IN.) Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture. (for Personal mode)

Colour Select among colour temperature: Cold / Normal / Warm. Colour Temp

Temperature Adjusts the colour components independently to achieve a warm or Cold cool colour. (for Personal mode) Normal • Cold: Increases blue tint Warm • Normal • Warm: Increases red tint

BACK EXIT MENU

Noise Reduction Reduces the noise level of the connected device: Off / Low / Middle Noise Reduction

/ High. Off

Low

Middle

High

BACK EXIT MENU

Screen Adjusts the PC desktop content. (PC mode) Auto Allows you to synchronise a PC signal Adjust automatically.

H-Offset Adjusts the position of the picture Auto Adjust H-Offset 50 left and right in the window. V-Offset 50 Size 50 V-Offset Adjusts the position of the picture up Phase 50 and down in the window. Position Reset Size Adjusts the picture horizontally, in linear properties Phase Controls the signal phase, which can improve focus clarity and image stability based on the PC mode. Position Press to set the best screen position. Reset 3. Press the MENU button to return to the previous menu, press again to return to the main menu.

4. Press the EXIT button to exit the menu.

L32HE13_IB.indd 17 22/07/2013 12:10 Aspect Ratio HDMI Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Subtitle. The default setting is AUTO.

1. Press the ASPECT button to scroll through the aspect rations. The aspect Ratio can also be selected from the OPTION menu.

Input Signal 4:3 Input Signal 16:9 Auto This selection will display This selection will display the the picture according to picture according to the aspect the aspect ratio of the input ratio of the input source. source. Black bars will appear on both the left and right of the screen. 4:3 This selection will allow you to This selection will allow you to view a picture with an original adjust the picture horizontally, 4:3 aspect ratio. Black bars will in linear proportion. Black bars appear on both the left and will appear on both the left and right of the screen. right of the screen. 16:9 This selection will allow you to This selection will allow you to adjust the picture horizontally, view a picture with an original in linear proportion, to fill the 16:9 aspect ratio. entire screen. Zoom This selection will allow you to This selection will allow you to zoom in the picture without zoom in the picture without any any alteration, while filling the alteration, while the 4 sides of entire screen. However, the the picture will be cropped. top and bottom of the picture will be cropped. Smart Zoom This selection is similar to 16:9 This selection is similar to 4:3 mode, but the picture slightly mode, but the picture slightly stretches horizontally and clips stretches vertically and clips off off a little from the top and a little from the top and bottom. bottom. Subtitle This selection will allow you to This selection will allow you to zoom in the picture without zoom in the picture without any alternation, while filling any alternation, while showing the entire screen with subtitles subtitles at the bottom of the shown at the bottom of the screen. screen.

L32HE13_IB.indd 18 22/07/2013 12:10 Sound Setting

Allows you to adjust the sound settings on your TV.

1. Press the MENU button and then press the buttons to select the

SOUND menu and then press the OK button. CHANNEL

PICTURE SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select the following sound options and then press the OK button. Sound Mode Standard Treble 50 Bass 50 Balance 0 Auto Volume On SRS TruSurround HD On SPDIF Mode Auto AD Switch Off

3. Press the buttons to adjust each option’s setting.

Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music / Sound Mode Movie / Sports / Personal. Standard

Music

Movie

Sports

Personal

BACK EXIT MENU

Treble Controls the relative intensity of higher pitched sounds. (for Personal mode)

Bass Controls the relative intensity of lower-pitched sounds. (for Personal mode)

Balance Adjusts the relative volume of the speakers in a multiple speaker system.

Auto Volume Volume levels are automatically controlled (e.g., advertisements tend to be louder than the programmes).

SRS SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology that has been offered for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to 6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better intelligibility of vocals, and definition control for maximum high-frequency clarity. Press the OK button to select On / Off.

SPDIF Mode Selects the digital audio output mode.

AD Switch Audio Description is an auxiliary audio function that provides an additional audio track for visually (For DTV mode) challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the main audio from the broadcaster. • Set to “Off” for normal broadcasting sound coming out from speakers. • Set to “On” to activate the description sound track if available. The availability of Audio Description sound track is indicated by the visually impaired icon "V.I." in the information banner. When you select ON you can adjust the volume of the Audio Description by pressing the buttons.

4. Press the MENU button to return to the previous menu, press again to return to the main menu.

5. Press the EXIT button to exit the menu.

L32HE13_IB.indd 19 22/07/2013 12:10 EPG (Electronic Programme Guide) (DTV Mode)

This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for the next 7 days.

Switch On / Off EPG 1. Press the TV GUIDE button to switch on EPG. 2. Press the TV GUIDE button or the EXIT button again to switch off EPG and return to normal TV viewing.

PROGRAMME GUIDE 1 BBC ONE current channel name current date and time 25 Dec 2008 10:06 10:00-10:15 Pinky and Perky current programme title

25 Dec programme date DTV 10:00 11:00 programme time 1 BBC ONE Pinky and perky Frankenstei.. No information 2 BBC TWO My Fair Lady channel no. and 7 BBC THREE This is BBC THREE programme information channel name 70 CBBC Channel Bear Behaving Badly Shaun the .. No information 80 BBC NEWS BBC News Our World: Stormchaser 105 BBC Red Button BBC Red Button

Select a Programme Press the buttons to select the desired channel and then press the buttons to select the desired programme. Press the OK button to confirm.

Button Functions in a 7-Days Guide Remote Control Button Function • Timer Programming RED (Record) See page 23 for details on Timer Programming. • Press the RED button in the Schedule List to delete the selected preset reminder.

Press the GREEN button to view Schedule List 15:30 10th Mar Delete Back

the preset reminders or scheduled Time Date Programme Title Channel Name recordings in the Schedule list. Press GREEN (Schedule) the GREEN button again to return to the EPG.

YELLOW (Date) Press the YELLOW button and then press the buttons to view the schedule of the previous / next day. Press the YELLOW button again to return to the EPG.

Press the BLUE button while on the selected programme, Reminder setting the Reminder setting menu will be displayed. _ Press the buttons to adjust the settings and 15 Film 4 + then press the OK button to confirm the settings. After 05 Hour 08 Minute BLUE (Remind) confirmation, the Schedule list will then be displayed with your preset reminders shown. Press the GREEN button to 28 Date Apr Month return to the EPG. The TV will automatically tune to the Once Mode selected programme when it starts. OK BACK

INFO Press to display detailed information of the selected programme (if available). or Press to select a channel. or Press to select a programme. OK Press to confirm and view the selected channel. TV GUIDE / EXIT Press to switch off the EPG.

L32HE13_IB.indd 20 22/07/2013 12:10 Time Shift Recording onto a USB Storage Device

This function allows you to pause live TV. The picture will pause and the programme will begin recording so you don't miss any of the programme. You will have to have a USB storage device attached to the USB socket for Time Shift Recording to work.

• Time Shift Mode and Recording functions If the transfer rate of the USB storage device is too slow may not work if the signal strength is weak. for recording or time shift function, a warning statement • Stop the time shift function before switching will be shown on the screen. If this happens, please to another input source. upgrade your USB storage device. The minimum transfer speed is 5MB/s.

While watching your TV, you may press the button to pause the live programme if you want to go out for a while (e.g. going to the bathroom / kitchen). " " will show on the screen. When you have returned, press the button to play the missed broadcast programme. " " will show on the screen. The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed programme. It will soon turn to normal.

Alternative Press the OK button to display the PVR Time Shift progress bar and then press the buttons to select " Play" on the bar. Press the OK button to confirm.

1 The ‘PVR Time Shift Progress Bar’ 1 Indicates the status of the currently displayed video ( / / / ) 2 Indicates the time lagging behind the live broadcast (PVR reviewing) 3 Indicates the available recording 2 time on your USB storage device 3 4 Indicates the current time 4

Using the Remote Control You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 15 seconds. Press the OK button to display the PVR Time Shift progress bar again.

or When playing, • Press the button repeatedly to speed up x 2 / x 4 / x 8 / x 16. • Press the button repeatedly to speed up x 2 / x 4 / x 8 / x 16. • During fast forward / fast backward state, press the button to return to normal playback.

or • Press the button to jump about 10% forward. • Press the button to jump about 10% back.

OK During playback, press the OK button to display a still screen and then press the button again to resume playback. If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the button and then press the button to confirm.

L32HE13_IB.indd 21 22/07/2013 12:10 Recording DTV Programmes onto a USB Storage Device

Use this function to record the DTV programme you are watching on the main screen and save it for future viewing. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the button to record the programme that you are currently watching.

The recording progress bar will disappear after 15 seconds. To display the recording progress bar again, press the OK button or the button.

2. Press the button to stop recording.

Recording will stop automatically when the disk is full.

If you want to turn off your TV during recording, press the button. A dialogue will display.

The recording is still inprogress. Do you want to switch off the TV?

Yes, Stop recording and Yes, turn off the screen No switch off the TV and sound but keep recording the programme

Press the buttons to select your desired option and then press the OK button to confirm. If you select the middle option in the box, the screen will turn off but the recording will still be in progress, the LED indicator will alternatively flash red and blue.

L32HE13_IB.indd 22 22/07/2013 12:10 Timer Programming

This function is used to perform scheduled recording. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the TV GUIDE button on the remote control. The EPG menu will PROGRAMME GUIDE 1 BBC ONE appear. Press the buttons to select the desired programme to 25 Dec 2008 10:06 10:00-10:15 Pinky and Perky

record. 25 Dec DTV 10:00 11:00 1 BBC ONE Pinky and perky Frankenstei.. No information 2 BBC TWO My Fair Lady 7 BBC THREE This is BBC THREE 70 CBBC Channel Bear Behaving Badly Shaun the .. No information 80 BBC NEWS BBC News Our World: Stormchaser 105 BBC Red Button BBC Red Button

2. Press the button or the RED button on the remote control while on the RECORDER selected programme, the RECORDER menu will be displayed. The recording time for the selected programme will be automatically set. If you want 1 BBC ONE to adjust the time press the buttons to select the settings in the Start Time RECORDER menu for the Channel, Start time, End time and Mode. 10 Hour 00 Minute

Channel Display the channel that you wanted to record. 25 Date

Start time Press the buttons to select the Hour / Minutes Dec Month / Date / Month and then press the buttons to End Time adjust the start time. 10 Hour

End time Press the buttons to select the Hour / Minutes 15 Minute / Date / Month and then press the buttons to 25 Date adjust the start time 25 Date Dec Month Mode Press the buttons to select the Once / Everyday Mode Once / Weekly. Back

3. After finishing all the recorder adjustments, press the OK button to confirm your settings. A Timer Save Success screen will display.

Timer Save Success BBC 1 25 DEC 2013 10:00 ✔

• If you see the 'Pls connect USB first' display then you must connect a USB storage device and set the recording again or your recording will NOT record. 4. The Schedule List will be displayed, to remove the list press the GREEN button. Pls connect USB first BBC 1 25 DEC 2013 10:00 ✘

• When the preset time is reached, the TV will start recording automatically. • If a programme recording starts when the TV is in standby mode, the LED indicator will alternatively flash red and blue.

L32HE13_IB.indd 23 22/07/2013 12:10 Playing Recorded Programmes

The recorded List shows a list of all the recordings that have been made. You can view all your recordings from this list and see information about each recording.

1. Press the REC List button on the remote control. The Recorded List

menu will appear. Press the buttons to select the desired recorded Recoded List Programme

programme. Doctor Who This Morning 2. Press the OK button to view the recording. Neighbours

• To see more information about a recording press the GREEN button or the button. 25 Date

• To delete a recording, highlight the recording you wish to delete and Delete Info press the RED button. REC LIST • You can view the Recorded List in 3 different orders. Press the REC LIST button to change the order. Programme View - This will list the recordings in alphabetical order. Channel View - This will list the recordings in channel order. Time View - This will list the recordings in date order.

Playback Controls You can play, pause, fast forward, fast rewind and skip forwards and backwards in 30 second increments.

or • Press the button to jump forward 30 seconds. • Press the button to jump back 30 seconds.

• During playback, press the button to display a still screen and then press the button again to resume playback. • During fast forward / fast backward state, press the button to return to normal playback. OK During playback, press the OK button to display the recording progress bar. It the recording progress bar is already displayed pressing the OK button will pause the recording. Press the button to resume playback. If you want to stop the recording and return to the current live broadcast, press the button and then press the button to confirm.

1. Press any one of the Playback Controls on the remote control and the playback control menu will appear at the bottom of the screen. You can now press any of the playback controls on the remote control or press to highlight the button on the screen then press OK.

2. Press the EXIT button to remove the Playback Control menu.

[00:00:33/00:04:22]

Play FB FF Prev. Next Pause Stop 06:18

L32HE13_IB.indd 24 22/07/2013 12:10 Digital Teletext (DTV Mode)

Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 32 for details).

Teletext within Digital Service

1. In DTV mode press the TEXT button to display teletext page.

2. Follow the instructions on digital teletext page and move around the page by pressing , OK, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.

To change digital teletext services, you will need to exit the current text service and change channels. Then enter the text service on the newly selected channel.

Alternative You may press the RED button to display the teletext information when you see a red "press " logo in the top right corner of the screen (e.g. BBC services). This will now display the teletext menu and available information categories. To access the pages, use navigation buttons to highlight item required and press the OK button to select. Follow on screen prompts for other functions.

3. Press the TEXT button to exit.

Listening to the Radio

You can listen to radio stations through your TV.

1. Press the TV/RADIO button to select radio mode.

• If you want to remove the radio display from your TV screen press the B B C RADIO Scott Mills DISPLAY button, this will hide the display. To see the display again 13.00 - 16.00 press DISPLAY. Now Playing: 22 by Taylor For programme info, Swift events & news, press RED

2. Press the CH +/- buttons to change radio stations or press the TV GUIDE PROGRAMME GUIDE 1 BBC Radio 1 button to see all the stations in the Programme Guide. 25 Dec 2008 10:06 13:00-16:00 Scott Mills

25 Dec Radio • You will NOT be able to record any radio stations. 10:00 11:00 700 BBC Radio 1 Scott Mills Greg James 701 BBC R1X My Fair Lady 702 BBC Radio 2 Steve Wright in the Afternoon 703 BBC Radio 3 Afternoon on 3 704 BBC Radio 4 The Food Programme The Concrete and the Divine 705 BBC R5L Richard Bacon Drive

L32HE13_IB.indd 25 22/07/2013 12:10 Signal Information (DTV Mode) Allows you to view the signal information.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Signal Information and then press the OK button to view the signal information. Auto Tuning DTV Manual Tuning Channel Edit Signal Information CI Information Software Update(OAD) Off Software Update(USB)

3. Press the MENU button to return to the previous menu, press again to Signal Information return to the main menu. Channel 50

4. Press the EXIT button to exit the menu. Frequency 706.00Mhz

Quality 99

Strength 91

Network Crystal Palace

CI (Common Interface) (DTV Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.

Rear Right Side View of TV Do not repeatedly insert or remove the

Common Access Module as this may CI CARD IN Coaxial USB HDMI 3 In AV IN YPbPr damage the interface and cause Out a malfunction.

This feature is not available in all countries. CI (Common Interface) Allows the Common Access Module to be To insert the Common Access Module inserted and access the content that has been encrypted. 1. Before you insert the Common Access Module, ensure that the TV is switched off and the viewing card is inserted in accordance with the CI CARD IN Service Provider’s instructions.

2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module 1. Before you remove the Common Access Module, ensure that the TV is switched off at the mains. Common Access Module 2. Pull the Common Access Module from the slot.

3. Switch the TV on.

L32HE13_IB.indd 26 22/07/2013 12:10 To view the module information 1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select CI Information and then press the OK button. Auto Tuning DTV Manual Tuning Channel Edit Signal Information CI Information Software Update(OAD) Off Software Update(USB)

3. A CI Information Main menu will pop up. Press the buttons to display the module information, smart card information, language, CI Information software download. Press the OK button to confirm. Conax Conditional Access Main menu 4. Press the EXIT button to return to the previous menu. Press the EXIT button again to exit the menu. Module Information Smart Card Information Language Software Download

This screen is for illustration only. Press ‘OK’ to select; Press ‘EXIT’ to quit

Software Update (Over Air Download) (DTV Mode) The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Software Update(OAD) and then press the OK button to select On. Auto Tuning 3. Press the MENU button to return to return to the main menu. DTV Manual Tuning Channel Edit Signal Information 4. Press the EXIT button to exit the menu. CI Information Software Update(OAD) Off Software Update(USB)

L32HE13_IB.indd 27 22/07/2013 12:10 1. During normal DTV viewing, if the TV detects the latest firmware from the

DTV signal, the Over Air Download screen will appear. Press the buttons New Fireware is available to select Yes / No for upgrade procedure. TV Version V0.01 Stream Version v0.02

Yes to upgrade No to exit the upgrade

Yes No

2. If you select Yes, the over air download will start. Press the EXIT button if you want to stop the download and exit the menu.

Download During the download, please do not turn off or unplug your TV. 20%

EXIT

3. When the download is complete, the TV will automatically upgrade the software.

Software Update(OAD) 4. When the update is complete, the TV will return to standby mode. 66% 5. Press the button on the remote control to switch on the TV.

If you experience difficulties after the software update, we recommend that you restore your TV to the factory default settings. To do this, follow the steps below: 1. Press the MENU button. Press the buttons to select OPTION and then press the OK button. 2. Press the buttons to select Restore Factory Default and then press the OK button. Press the button to select Yes to reset the setting. 3. The TV will restore all settings and go to the First Time Installation. Follow the Turning the TV on for the First Time section at the front of this book.

Software Update (USB) This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website: http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

L32HE13_IB.indd 28 22/07/2013 12:10 Time Settings

Allows you to adjust time zone, sleep time, auto standby, OSD timer and summer time.

1. Press the MENU button and then press the buttons to select the

TIME menu and then press the OK button. CHANNEL

PICTURE

SOUND TIME

OPTION

LOCK

EXIT

2. Press the buttons to select the following time options and then press the OK button. Clock ------Time Zone GMT Sleep Timer Off Auto Standby 4 H OSD Timer 10 S Summer Time Auto

3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.

L32HE13_IB.indd 29 22/07/2013 12:10 Clock (DTV mode) The clock is set automatically when receiving a digital signal.

Time Zone When you select a Time Zone city, the TV time is set by Time Zone

(DTV mode) the time offset information based on Time Zone and GMT Canary GMT Rabat GMT Berlin GMT+1 (Greenwich Mean Time) which is received with the broadcast

signal and the time is set automatically by a digital signal. Lisbon GMT Amsterdam GMT+1 Brussels GMT+1

London GMT Beograd GMT+1 Budapest GMT+1

Move Menu

Sleep Timer The sleep timer automatically switches the TV to standby Sleep Timer

after the preset time has elapsed. The clock will be set Off automatically when receiving a digital signal. Time must be 10min set before using Sleep Timer function. 20min 30min

Press the buttons to select a period of time after which 60min the TV automatically switches to standby mode: OFF / 10 90min / 20 / … / 180 / 240 min and then press the OK button to BACK EXIT MENU confirm. The timer begins to count down from the number of minutes selected.

Turning the TV off after setting the sleep timer, will erase the sleep timer.

Alternative 1. You may press the SLEEP button repeatedly to select the number of minutes: OFF / 10 / 20 / … / 180 / 240 min directly. 2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears.

Auto Standby The unit will automatically switch to standby mode up to the unit will automatically switch to standby mode in 4 hours after the last time the remote control was used. A 4 Min 26 Sec. reminder screen will pop up and count down before the unit Press the OK button to continue viewing. switches to standby mode. OK If you want to operate the TV for a long period of time, turn off the auto standby function. Press the MENU button to Auto Standby Off

display the main menu. Press the buttons to select the 3 H

Time option and then press the OK button. Press the 4 H buttons to select the Auto Standby option and then press 5 H the OK button to select "Off". Press the EXIT button exit the main menu. To save energy you should always turn the auto BACK EXIT MENU standby function back to "3H", "4H" or "5H".

OSD Timer This is the amount of time on screen displays are displayed OSD Timer

for, the time can be set as follows: 5 S 5s / 10s / 15s / 20s / 25s / 30s 10 S Press the to select a time and then press the OK button 15 S to confirm. 20 S 25 S

30 S

BACK EXIT MENU

Summer Timer Press the buttons to select OFF / ON / Auto. 4. Press the MENU button to return to the previous menu, press again to return to the main menu.

5. Press the EXIT button to exit the menu.

L32HE13_IB.indd 30 22/07/2013 12:10 Option Setting

OSD Language Allows you to select your desired on screen menu language.

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME OPTION

LOCK

EXIT

2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is English. OSD Language English TT Language West Audio Language English Subtitle Language English Hearing Impaired Off PVR File System Aspect Ratio Auto Blue Screen On HDMI CEC Restore Factory Default

3. Press the buttons to navigate the menu and change the OSD Language settings. Press the OK button to confirm to return to the previous menu.

4. Press the EXIT button to exit the menu. English Español Français

Deutsch Português Italiano

TT Language Allows you to select your preferred Teletext language (if the language is being broadcast).

• The TT Languages are West - East - Russian - Arabic - Farsi West is the default language.

Audio Language (DTV Mode) Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.) The Audio Language is the language used to describe the programmes when the Hearing Impaired option is switched on.

1. Press the buttons to select your desired audio language. Audio language Primary

Česky English Français

Dansk Español Hrvatski

Deutsch Ελληνικά Italiano

L32HE13_IB.indd 31 22/07/2013 12:10 Subtitle Language (DTV Mode) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.)

1. Press the buttons to select the Primary / Secondary Subtitle Subtitle language Primary Language. Press the button and then press the buttons to select your desired subtitle language. Press the OK button to confirm Česky English Français and return to the previous menu.

Dansk Español Hrvatski While watching a DTV programme, you can press the SUBTITLE button on the remote control to display the Subtitle Language List and then press the buttons to select the Deutsch Ελληνικά Italiano Subtitle Language or OFF. Press the OK button to confirm. (Only applicable when the TV programme has this feature.)

Hearing Impaired This feature enhances the audio level on dialogue. (For DTV channels only if available.)

1. Press the buttons to select Hearing Impaired and then press the OSD Language English OK button to select On / Off. TT Language West Audio Language English 2. Press the MENU button to return to the main menu. Subtitle Language English Hearing Impaired Off PVR File System 3. Press the EXIT button to exit the menu. Aspect Ratio Auto Blue Screen On HDMI CEC Restore Factory Default

L32HE13_IB.indd 32 22/07/2013 12:10 PVR File System (DTV Mode) Allows you to select your preferences in the PVR File System.

1. Press the MENU button and then press the buttons to select the OSD Language English OPTION menu and then press the OK button. TT Language West Audio Language English 2. Press the buttons to select PVR File System and then press the OK Subtitle Language English Hearing Impaired Off button. PVR File System Aspect Ratio Auto 3. Press the buttons to select the following PVR File System options Blue Screen On HDMI CEC and then press the OK button. Restore Factory Default

Select Disk Select the disk where you want to store your recorded content. Check PVR File Press the OK button, the system will now System check your USB device's suitability for PVR. Select Disk C: Select Disk C: Check PVR File System Start Check PVR File System SUCCESS The system will show "Checking". Upon USB Disk USB Disk Pass completion, the system will show either Format Format Pass

"SUCCESS" or "FAIL". Time Shift Size Time Shift Size 0 MB

Speed Speed 1792 KB/s

Free Record Limit 4 Hr. Free Record Limit 4 Hr.

USB Disk If no USB storage device is connected, it will show "No USB Disk". If the Check PVR File System has a "SUCCESS" it will show "Pass". Format Press the OK button, a File System Size menu will pop-up. Press the buttons to select your preferred file type between FAT32 and HiSpeed FS. If you select HiSpeed FS, press the button and then press the buttons to select your preferred file size. Press the OK button to confirm and then press the button to start formatting. Formatting the disk will delete any information previously stored on the disk.

File System Size Format disk Format disk

PVR File System Type FAT32 Do not unplug USB device. Format disk PVR File System Size All Formatting,please wait Warning! All data will be lost. SD 107 Mins

Start Exit

Time Shift Size After formatting the Time Shift Size menu will appear if you have Time Shift Size

selected HiSpeed FS in PVR File System Type. Press the buttons Time Shift Disk Size 4GB to select your preferred file size. Press the OK button to confirm. SD 112 Mins This option cannot be chosen if you have selected FAT32 in PVR File System Type.

Speed This shows the transfer rate of your USB storage device.

Free Record Limit Press the buttons to set the recording time limit from 1-4 hours per recording.

L32HE13_IB.indd 33 22/07/2013 12:10 Blue Screen Allows the blue background to turn On or Off during weak or no signal conditions.

1. Press the MENU button and then press the buttons to select the OSD Language English OPTION menu and then press the OK button. TT Language West Audio Language English 2. Press the buttons to select Blue Screen and then press the OK Subtitle Language English Hearing Impaired Off button to select On / Off. PVR File System Aspect Ratio Auto 3. Press the MENU button to return to the previous menu, press again to Blue Screen On HDMI CEC return to the main menu. Restore Factory Default

4. Press the EXIT button to exit the menu.

HDMI CEC (Consumer Electronics Control) (HDMI Mode) Allows you to command and control two or more HDMI CEC compliant devices, that are connected through HDMI, by using only one of the remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). HDMI CEC also allows individual HDMI CEC compliant devices to command and control each other without user intervention. Make sure that your HDMI CEC-compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.)

HDMI-CEC Connection • This unit can only communicate

HDMI Cable with HDMI-CEC compatible (not included) devices. • To be sure that the HDMI-CEC HDMI CEC compliant device device has this feature, check to see if there is HDMI-CEC compatible logo on it. TV

1. Press the buttons to select HDMI CEC and then press the OK button. OSD Language English 2. The HDMI CEC sub-menu will display. TT Language West Audio Language English Subtitle Language English Hearing Impaired Off This will allow your TV to communicate with PVR File System the connected HDMI-CEC compliant device. Aspect Ratio Auto HDMI CEC Blue Screen On Press the buttons to select HDMI CEC HDMI CEC and then press the buttons to turn On. Restore Factory Default

Press the buttons to select Device Menu. Press the OK button to display the setup menu of the connected HDMI-CEC Device Menu compliant device. You can use the

buttons to navigate through the setup HDMI CEC Off menu (some HDMI-CEC compliant devices Device Menu may not support this function). Auto Turn Off Off

Press the buttons to select Auto Turn Off and then press the buttons to turn Auto Turn Off on. This will allow the connected HDMI compliant device to automatically turn off when you turn the TV to standby mode.

3. Press the MENU button to return to the previous menu, press again to return to the main menu.

4. Press the EXIT button to exit the menu.

L32HE13_IB.indd 34 22/07/2013 12:10 Restore Factory Default Restores all settings to the factory defaults.

1. Press the MENU button and then press the buttons to select the OSD Language English OPTION menu and then press the OK button. TT Language West Audio Language English 2. Press the buttons to select Restore Factory Default and then press Subtitle Language English Hearing Impaired Off the OK button. PVR File System Aspect Ratio Auto 3. Press the button to select “Yes”. The TV will return to the first time Blue Screen On HDMI CEC installation menu. Restore Factory Default Press the button to select "No" to cancel and return to the main menu.

All channel and user settings will be lost and the TV will revert to "First Time Installation". Are you sure?

Yes No

L32HE13_IB.indd 35 22/07/2013 12:10 Lock Setting

To access all the LOCK menu options, you must enter the password. Enter the default password “0000” for first time use. To change the password, refer to “Change Password”.

Lock System The Lock System is designed to prevent accidental re-tuning of the TV / losing of channels and to prevent children from watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default.

1. Press the MENU button and then press the buttons to select the

LOCK menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXIT

2. Press the buttons to select Lock System and then press the OK button. Lock System Off Set Password Block Channel Parental Guidance Off Key Lock Off

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

The default password is “0000”. If you change the password, be sure to remember the new Please enter password password! If you forget the new password, enter the master password“8899”.

4. Press the buttons to select Lock System and then the OK button to select On / Off. If the Lock System is set to On, a valid password must be entered when you Lock System On access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default. Set Password Block Channel Parental Guidance Off 5. Press the MENU button to return to the previous menu, press again to Key Lock Off return to the main menu.

6. Press the EXIT button to exit the menu.

L32HE13_IB.indd 36 22/07/2013 12:10 Set Password

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. Lock System Off Set Password 2. Press the buttons to select Set Password and then press the OK Block Channel button. Parental Guidance Off Key Lock Off

3. Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation. Please enter old password

The default password is “0000”. Please enter new password If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”. Confirm new password

4. Press the EXIT button to exit the menu.

Block Channel Block Channel is designed to prevent someone from watching unsuitable programmes. When a channel is blocked, a valid password must be entered.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. Lock System On Set Password 2. Press the buttons to select Lock System and then press the OK Block Channel button. Parental Guidance Off Key Lock Off

The default password is “0000”. If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

Lock System Off Set Password 3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. Block Channel Parental Guidance Off Key Lock Off

4. Press the buttons to select Block Channel and then press the OK Block Channel button. 1 BBC ONE DTV 2 BBC TWO DTV

5. A Block Channel screen will pop up. Press the buttons to select a 3 ITV DTV channel. Press the GREEN button on the remote control to block or 4 Channel 4 DTV unblock the channel. Press the GREEN button again to unblock. 5 Channel 5 DTV 6 ITV 2 DTV 6. Press the MENU button to return to the previous menu, press again to 7 BBC THREE DTV return to the main menu. 8 BBC FOUR DTV 9 BBC TWO DTV

7. Press the EXIT button to exit the menu. 10 BBC TWO DTV

Lock/Unlock

If you now try to select a blocked channel you will be asked for your password. Menu

L32HE13_IB.indd 37 22/07/2013 12:10 Parental Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This TV is programmed to remember the last option set even if the TV is switched off. When a programme is locked or rated, a valid password must be entered.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. Lock System On 2. Press the buttons to select Lock System and then press the OK Set Password Block Channel button. Parental Guidance Off Key Lock Off The default password is “0000”. If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

4. Press the buttons to select Parental Guidance and then press the Lock System On OK button. Set Password Block Channel Parental Guidance Off Key Lock Off

5. Press the buttons to select an age rating: Off, 4-18. Then press the OK Parental Guidance button to confirm. Off

6. Press the MENU button to return to the previous menu, press again to 4 return to the main menu. 5 7. Press the EXIT button to exit the menu. 6

BACK EXIT MENU

L32HE13_IB.indd 38 22/07/2013 12:10 Key Lock Key Locked is designed to prevent children from pressing the buttons on the TV. The Lock System must be set to On for this function to operate. If the Key Locked is set to On, all buttons on the TV will be locked. All TV operations can be controlled by the remote control only.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. Lock System Off Set Password 2. Press the buttons to select Lock System and then press the OK Block Channel button. Parental Guidance Off Key Lock Off

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Lock System On The default password is “0000”. Set Password Block Channel If you change the password, be sure to remember the new Parental Guidance Off password! If you forget the new password, enter the master Key Lock Off password“8899”.

4. Press the buttons to switch the System Lock ON.

5. Press the buttons to select Key Lock and then press the OK button to select On / Off. Lock System On 6. Press the MENU button to return to the previous menu, press again to Set Password Block Channel return to the main menu. Parental Guidance Off Key Lock On 7. Press the EXIT button to exit the menu.

Connecting a USB Storage Device

Rear Right Side View of TV 1. Switch off the TV before connecting any USB

storage device. CI CARD IN Coaxial USB HDMI 3 In AV IN YPbPr Out 2. Connect your USB storage device to the USB port of your TV. If your USB device is powered by the main, plug the connected devices into the mains socket and switch on. USB

3. Press the button on the remote control to turn USB Hub on your TV. USB Cable (not included) Adapter Portable 4. Press the USB button on the remote control to hard Disk enter USB mode.

• Some versions of portable hard disk may require more power than the TV USB socket can provide. To ensure correct operation please use the power adapter for that device. • If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA. • The file system only supports FAT32 format. • If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. • The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk. • Disconnect the USB storage device if it is not in use.

L32HE13_IB.indd 39 22/07/2013 12:10 Viewing Photos

1. Press the USB button on the remote control.

2. Press the buttons to select PHOTO and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button. PHOTO

4. Press the buttons to navigate in the picture folder/file and then press the OK button.

If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

Supported file formats: JPG.

5. Press the OK button to display the function bar. Press the buttons and then press the OK button to select the function: Pause / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Music / Playlist / Info / Rotate clockwise / Rotate anti-clockwise / Zoom In / Zoom Out / Move View.

6. Press the EXIT button to return to the previous menu.

If this folder also contains music files, you can select a music track to play at the same time you view your photos.

L32HE13_IB.indd 40 22/07/2013 12:10 Listening to Music

1. Press the USB button on the remote control.

2. Press the buttons to select MUSIC and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to navigate in the music folder/file and then press the OK button. The music will start to play.

If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

• Some audio file formats will not be supported. • Supported file formats: mp3.

5. The music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size) will be displayed. To display the function bar Press the OK button. Then press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev / Next / Stop / Repeat All / Playlist / Goto Time.

6. Press the EXIT button to return to the previous menu.

L32HE13_IB.indd 41 22/07/2013 12:10 Viewing Movies

1. Press the USB button on the remote control.

2. Press the buttons to select MOVIE and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to navigate in the movie folder/file and then press the OK button. The movie will start to play.

If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

• Some video file formats will not be supported. • Supported file formats: MPEG1/2/4 and AVI.

5. Press the OK button to display the function bar. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

6. Press the EXIT button to return to the previous menu.

L32HE13_IB.indd 42 22/07/2013 12:10 My Text

1. Press the USB button on the remote control.

2. Press the buttons to select TEXT and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to navigate in the text folder/file and then press the OK button. The file will now be displayed.

If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

• Supported file format: TXT.

5. Press the OK button to display the function bar. Press the buttons and then press the OK button to select the function: Prev. page / Next page / Prev. / Next / Stop / Music / Playlist / Info.

6. Press the EXIT button to return to the previous menu.

L32HE13_IB.indd 43 22/07/2013 12:10 Play Recorded Programme

You can play a recorded programme from the recorded programme list or from a USB Storage Device.

1. Press the USB button on the remote control.

2. Press the buttons to select MOVIE and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to select the "MY PVR" folder and then press the OK button.

5. Press the buttons to select your recorded programme and then press the OK button. The programme will start to play.

• If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to select "Yes" to confirm. Press the OK button or the INFO button to display the function bar.

6. Press the OK button to display the function bar. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

7. Press the EXIT button to return to the previous menu.

L32HE13_IB.indd 44 22/07/2013 12:10 Maintenance Maintenance

Careful and regular cleaning can prolong the life of your TV.

Be sure to press the button on the remote control and disconnect the mains cable from the mains socket before any cleaning.

1. Use a soft dry cloth to wipe away the dust from the screen and surfaces.

2. If the surfaces are extremely dirty, clean the TV with a damp cloth.

3. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on.

Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust.

L32HE13_IB.indd 45 22/07/2013 12:10 Hints and Tips Hints and Tips

The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

The TV does not operate properly. The TV does not respond when • The TV may freeze up during use. Switch the TV off at the main for a few minutes. pressing any buttons Switch on again and try to operate it again as usual. • Check that the TV is connected to the mains supply and switched on. TV cannot be switched on • Make sure all connected AV devices are switched off before switching on your TV. • Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at The remote control does not work the TV. • Ensure that the batteries are installed with the correct polarity (+ to +, - to -). • Install new batteries. • Check the power of the TV. The mains supply maybe interrupted. Power is suddenly turned off • Check if the sleep timer is set. • Check whether the Auto Standby is activated.

The video function does not work. • Check whether the TV is switched on. No Picture & No Sound • Try another channel. The problem may be caused by the broadcaster. Picture appears slowly after • This is normal, the image is muted during the TV startup process. Please contact switching on your service centre, if the picture has not appeared after five minutes. • Adjust the settings in the PICTURE menu. No or poor colour or poor picture • Try another channel. The problem may be caused by the broadcaster. • Check if the video cables are connected properly. Horizontal / Vertical bar or picture • Check for local interference such as an electrical appliance or power tool. shaking • Station or cable channel may be experiencing problems, tune to another station. Poor reception on some channels • Station signal is weak, reposition the aerial for better reception. • Check for sources of possible interference. Lines or streaks in pictures • Check aerial (Change the position of the aerial.) No pictures when connecting HDMI • Check if the input source is HDMI 1 / HDMI 2 / HDMI 3. Picture appears in wrong ratio • Adjust the Aspect Ratio. Press the ASPECT button on the remote control.

The audio function does not work. • Press the VOL + / – buttons. Picture OK but no sound • Sound muted? Press the MUTE button. • Try another channel. The problem may be caused by the broadcaster. No output from one of the speakers • Adjust the Balance settings in the SOUND menu. • A change in ambient humidity or temperature may result in an unusual noise when Unusual sound from inside the TV the TV is switched on or off and does not indicate a fault with the TV. No sound when connecting HDMI • Check if the input source is HDMI 1 / HDMI 2 / HDMI 3. Audio noise • Keep the RF coaxial cable away from other connected cables.

Password • Select the Set Password setting in the LOCK menu, then enter the following master Lost password password “8899”. The master password clears your previous password and allows you to enter a new password.

L32HE13_IB.indd 46 22/07/2013 12:10 There is a problem in PC mode. The signal is out of range (Invalid • Adjust the resolution, horizontal frequency, or vertical frequency. format) Vertical bar or stripe on background • Use Auto configure or adjust clock, phase, or H/V position. & horizontal noise & incorrect position Screen colour is unstable or shows a • Check the signal cable. single colour • Reinstall the PC video card.

FAQs (Frequently Asked Questions) • It happens sometimes if you have a weak signal. Usually it just means you’ll need to Why have I lost some / all of my re-tune your TV. Don’t worry, it is easy to do. And once you’ve done it, you should channels? get all the Freeview channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer. • In most cases, blocking is caused by a reception problem – either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local Why do I get ‘blocking’ on my digital aerial installer. picture? • Blocking can also be caused by a digital signal that is too strong. If you are still experiencing blocking and the signal is strong, consult your local aerial installer for advice. • Some, but only a few, homes may be able to use a set top aerial. However, for a much better reception, we strongly recommend that you use a rooftop aerial. Can I watch Freeview using a • If you do not have access to a rooftop aerial – for example, if you rent a flat and portable set-top aerial? the aerial is the responsibility of your landlord, or if you’re using a second TV in the bedroom and don’t want the hassle and expense of using extension cables, a set top aerial may be your only option. • If you are installing a new aerial, we recommend a wideband rooftop aerial rather than a loft aerial. Loft aerials generally receive a weaker digital signal and are more What type of aerial do I need? likely to get interference from other electrical devices at home. We suggest you have an aerial survey done before getting an aerial upgrade. • Talk to your retailer or contact your local aerial installer.

L32HE13_IB.indd 47 22/07/2013 12:10 Display Modes

The screen resolution has been optimised during production for the display modes listed below. Although this TV is compatible with a 1080i/1080p input, it is possible that the screen may not display the exact resolution this resolution and consequently the picture quality will be adjusted accordingly.

YPbPr Mode

Resolution Vertical Frequency (Hz) Aspect Ratio 480I: 720 x 480 60 480P: 720 x 480 576I: 720 x 576 50 576P: 720 x 576 50 Auto / Smart Zoom / Zoom / 16:9 / 720P: 1280 x 720 60 4:3 / Subtitle 50 1080I: 1920 x 1080 60 50 1080P: 1920 x 1080 60

PC Mode Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video.

Resolution Vertical Frequency (Hz) Aspect Ratio 60 640 x 480 72 75 60 800 x 600 72 4:3 / 16:9 75 60 1024 x 768 70 75 1360 x 768 60

HDMI Mode

Resolution Vertical Frequency (Hz) Aspect Ratio 480I: 1440 x 480 60 480P: 720 x 480 60 576I: 1440 x 576 50 576P: 720 x 576 50 50 Auto / Smart Zoom / Zoom / 16:9 / 720P: 1280 x 720 60 4:3 / Subtitle 50 1080I: 1920 x 1080 60 50 1080P: 1920 x 1080 60

L32HE13_IB.indd 48 22/07/2013 12:10 Specifications Specifications

Model L32HE13

Panel System 32 inch LED Panel

Display Resolution 1366 pixels (horizontal) x 768 pixels (vertical)

PAL I / BG / DK SECAM I / BG / DK DVBT (VIDEO: MPEG-2 MP@ML, Television System SOUND: MPEG-1 LAYER 1/2, MPEG-2 LAYER 2)

Brightness 250 cd/m2

Contrast Ratio 3000 : 1

Power Source AC 100V~240V

Energy Efficiency Class A

Screen Size (measured diagonally) 31.5"

Power Consumption (In HOME / 35W/0.5W STANDBY mode)

Average Annual Energy Consumption 51.1 kWh / annum

Standby Power Consumption 0.5W

Operating Temperature 0°C – 50°C

Operating Humidity 10% – 80%

Mercury Content (mg) X

Presence of Lead √

Reference Period 2010/1062 - 2011

Speaker Power 2 x 5W

Dimension( W x D x H) with base 736(W) x 490(H) x 200(D)

Weight (Net) 5.6kg

Inputs / Output

SCART 1

HDMI 3

PC-RGB 1

PC AUDIO 1

YPbPr 1

Common Interface 1

USB 1

RF 1

Coaxial 1

Features and specifications are subject to change without prior notice.

L32HE13_IB.indd 49 22/07/2013 12:10 50

L32HE13_IB.indd 50 22/07/2013 12:10 51

L32HE13_IB.indd 51 22/07/2013 12:10 For general information about this appliance and handy hints and tips, please visit www.knowhow.com/knowledgebank or call 0844 5611234.

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only). Calls charged at National Rate.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

MPEG-2 NOTICE Any use of this product in any matter other than personal use that complies with the MPEG-2 standard for encoding video information for packaged media is expressly prohibited without a license under applicable patents in the MPEG-2 Patent Portfolio, which license is available from MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado, 80111 U.S.A. Rovi Proprietary Rights This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Restriction on Use & Rovi Trade Mark Rights Use of the copyright protection technology contained in this product must be authorised by Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Rovi Corporation. The names “Rovi Corporation” and “Macrovision” are protected by trademarks.

Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The FREEVIEW word and logo are trademarks of DTV services Ltd and are used under licence. ©DTV Services Ltd 2002 The “HD Ready” logo is a trademark of DIGITALEUROPE. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialogue. TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. All trademarks are the property of their respective owners and all rights are acknowledged.

DSG Retail Limited (Registered in England No. 504877) Maylands Avenue, Hemel Hempstead, Hertfordshire HP2 7TG. UK

(IB-L32HE13-130722V5)

L32HE13_IB.indd 52 22/07/2013 12:11