April 2015 theBlueBlue PressPress$2.95 U.S./$3.95 Canada

Which Dillon is Right for YOU? Page 6

DP 2 Dillon’sDillon’s RFRF 100100 3 AutomaticAutomatic PrimerPrimer FillerFiller Eliminates the need illon’s RF 100 Automatic Primer DFiller eliminates the task of fill- for primer pick-up tubes! ing primer pick up tubes. Now you simply pour your primers from their Fills the primer tube box into the top, press the blue but- ton and watch it run! while you reload! In about two minutes the primers are inside the protective metal hous- Clear polycarbonate shield ing. That’s about 30 rounds you can load while the RF 100 is doing your and protective housing work for you! The RF 100 is available for either large or small primers, and conver- sion kits are available at one low price of $47.95 each. Lg. Primer Filler L11-97077 $317.95 Sm. Primer Filler L11-97111 317.95 Lg. (Euro. 220v) L11-97112 327.95 Sm. (Euro. 220v) L11-97113 327.95 Sm. Conversion L11-17903 47.95 Lg. Conversion L11-17902 47.95 Nylon Packcloth Dust Cover L11-11143 14.95 4 What’s Inside: We READ Our Mail! t’s a shame that Nine is Ithere is a great picture of a CZ the New .22: 83 with this arti- cle [“Self- CMMG Mk9 T Defense Shoot- ing: Considera- Page 10 tions for Seniors” Feb. 2015] that says the gun is IDPA’s New discontinued. Only sort of true. Compact Carry The CZ 83 is the commercial version of the military/police CZ 82. While the 83 came in three cham-

     Pistol Division PRINTED ON 4/7/2011 berings – .32 auto, .380 and 9mm Makarov; the CZ 82 REVISIONS NOTES: SYM DESCRIPTION DATE APPROVAL

1. APPLICABLE STANDARDS/SPECIFICATIONS: A. DOD-STD-00100D (AR) Page 62 only came in 9mm Makarov. The good news is the CZ 82 B. ASME Y14.5M - 1994  

is a milsurplus handgun easily found in the USA, and

  commercial self-defense ammo is available. So maybe a

      quick note to your customer base...options are available   7.62x40         in spite the demise of the CZ 83 – buy a CZ 82!   Mike Nagengast WT, hanks so much for the beautiful photo of the CZ 83 in Part 2 T7.65 Browning/.32 ACP in the February 2015 issue.     I’m a serious handgun enthusiast and collector and have  Page 78  an extensive and eclectic inventory, which fortunately       includes the .32 CZ 83 that I ordered in 2008. I’ve always

ORIGINAL DATE OF DRAWING PART NO.      MECHANICAL  relished the panache of calibers a little outside the herd- DO NOT SCALE DRAWING PROPERTIES 04-07-11 UNLESS OTHERWISE SPECIFIED 2234 CR 719, BERRYVILLE, AR 72616            DIMENSIONS ARE IN INCHES          YP DRAFTSMAN CHECKER            YS TOLERANCE ON: ANGLES ± .5° IW              EL2 .XX ±.01 ENGR ENGR DECIMALS: .XXX ±.005           RA 7.62x40WT Case mentality mainstream that’s steadily getting worse. It’s par-           THIRD ANGLE PROJECTION ENGR ENGR          BH            NEXT ASSY USED ON SIZE CAGE CODE DRAWING NO. REV.             RH Product  IndexC OWSZ3 APPLICATION SCALE 10/1 TASK SHEET 1 OF 1 ticularly sad that the versatile and once-flourishing .32 Dillon Precision Products Reloading Machines: has virtually disappeared or been redacted to a couple of BL 550, Pg. 13; Square Deal B, Pg. 8; RL 550B, Pg. 14; embarrassing mini-gun options by the bigger-is-better XL 650, Pg. 20; SUPER 1050, Pg. 30; SL 900 Shotshell Loader, crowd. Even the .380 version disappeared when CZ-USA Pg. 38; and “Big Fifty Reloader, ” Pg. 50 dropped the CZ-83 altogether after 2012. We’re already RF 100 Automatic Primer Filler 3 getting closer than you think to having any new pistol you Vibratory Case Cleaners 18 want in your favorite caliber – as long as it’s 9mm Luger. Case/Media Separators 18 Dillon Progressive Reloading Dies 34-35 Joseph J. Maxwell – Oxford, MS Redding Reloading Dies 52 Thanks, guys! If I’d known my little CZ 83 was going to Dillon Reloading Scales 86 generate such a buzz, I’d have put it in the catalog long Reloading Components 42-43 ago. I’ve always liked CZ 82/83s and thought they were Books & Videos 82-83 severely overlooked. It’s nice to know I’m not the only Ear & Eye Protection 7, 12 one who appreciates them. Dillon Ammo Boxes & Bins 64 have been the proud owner of a RL 550B for a couple Dillon Leather by Mitch Rosen 24-25 Iof years now. It wasn’t until last week that I was intro- Concealed Carry Tote/“Plan B” Day Planner 26 duced to your case lube and polish. The case lube is Range Bag/Border Shift Ammo Bag/Pistol Cases 32 amazing. It’s so much simpler to use when doing quanti- Targets and Target Stands 54 ties of 5.56 and it doesn’t dent the shoulders! The polish Firearms Maintenance 66-67 cleans up even suppressor-fired brass in about 5 hours as Tools 53 opposed to 12 and they look like new! Shooting Accessories by Manufacturer: M. Neely – Southern Oregon Arredondo Accessories 33, 39, 59 Blade-Tech Industries Holsters, etc. 28 California Competition Works 40, 56, 57 THE CED Chronograph/Timer 85 BLUE PRESS Check-Mate Magazines 69, 70 Chip McCormick Magazines 68 Michael J. Dillon - Publisher Issue #274 C-More Sights 76 Mark G. Pixler - Editor April Comp-Tac Holsters 29 [email protected] 2015 Dewey Cleaning Supplies 67 Gary Kieft - Technical Editor Hogue Handgun Grips 60 International Handgun Leather 27 Contributors: Lone Wolf Distributors 58 Peter Caroline Robin Taylor Copyright 2015 by MagPul AR-15 Magazines/Accessories 72-73 Brian Dillon, Ph.D. Duane Thomas Dillon Precision Mec-Gar Pistol Magazines 70 John Marshall Barrett Tillman Products, Inc. Mernickle Holsters 26 All the electrical and/or electronic components of Dillon ProMag Rifle Magazines 70 equipment and all Dillon textiles are covered by a one-year Safariland Holsters 29, 57 warranty from date of purchase. Any modifications performed Streamlight Tactical Lights 47 to Dillon machines, or the addition of any unapproved The Wilderness Tactical Products 27 equipment, including automated or mechanical add-ons from Wilson Combat Magazines, Parts 68 other manufacturers, is expressly not recommended and Wise Company Gourmet Freeze Dried Food 83 will void the Dillon warranty. 5 6 Which Dillon is Right for YOU?

Page 8 Page 14 Page 20 Page 30 SQUARE DEAL B RL 550B XL 650 SUPER 1050 Our automatic-indexing The most versatile reloader Truly the state of the art, Our commercial-grade progressive reloader available, capable of load- our XL 650 features auto- reloader includes a swager designed to load moderate ing over 160 calibers. An matic indexing, an optional to remove the crimp from quantities of common automatic casefeeder is automatic casefeeder and military primer pockets, handgun calibers from .32 available for handgun a separate station for an and is capable of reloading S&W to .45 Colt. It comes calibers. Manual indexing optional powder-level all the common handgun to you from the factory set and an optional magnum sensor. Available in all calibers and several up to load one caliber. powder bar allow you to popular pistol and rifle popular rifle calibers. load magnum rifle calibers. calibers. Dillon Progressive Loading Machines: Facts & Figures

SQUARE DEAL B RL 550B XL 650 SUPER 1050 COST Base price $384.95 $439.95 $566.95 $1739.95 Caliber Conversion price range $86.95-96.95 $45.95-55.95 $77.95-87.95 $122.95-202.95 RATE Cyclic rate (Rounds per hour) 400 550 1000** 1200 One hour production rate 350 500 800** 1000 Caliber change time 10 min 5 min 10 min 20 min FEATURES Number of stations 4 4 5 8 Auto index yes no yes yes Auto Casefeeder no optional optional standard Uses standard (7/8” x 14) dies no yes yes yes Powdercheck System no no optional optional Primer Early Warning System standard standard standard standard Failsafe Powder System standard standard standard standard Separate Crimp Station yes yes yes yes SPECIFICATIONS Primer magazine capacity 100 100 100 100 Casefeed capacity (.38/.223) N/A N/A 600/500 600/500 Powder measure capacity 3/4 lb 3/4 lb 3/4 lb 3/4 lb Shipping weight 17 lbs. 25 lbs. 36 lbs.* 66 lbs. Height required above bench*** 34 in. 35 in. 44 in. 43 in. Benchtop overhang required*** 1-3/4 in. 3/4 in. 3/4 in. None CALIBERS Pistol .32 S&W - .45 Colt All common All common All common Rifle N/A All common All common .223 - .30-06 *XL 650 weighs 47 lbs. with optional Casefeeder. **With optional Casefeeder. ***Without optional Strong Mount. 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com HP1 Electronic Hearing Protector • Protection Rating NRR 21 • External battery compartment • Auto shut off extends battery life • Extra-deep, replaceable ear pads • Separate volume controls for each ear • TRUE stereophonic sound • Collapsible for ease of storage • One-year warranty on electronics

illon’s HP1 Electronic Hearing Protector Damplifies weak sounds while at the same time blocking out loud, harmful noise. Dur- ing loud noises, the HP1 maintains a com- fortable level of sound transmission – HP1 Hearing Protectors are designed to never completely shut off. The Dillon HP2 Folding Hearing Protector is comfortable to wear for extended periods and folds for easy storage when not in use. HP2 Dillon Hearing Protectors Non-Electronic HP1 (NRR 21) Electronic Hearing Protector, Blue Hearing Protector L11-10157 $135.00 HP1 Electronic Hearing Protector, Black L11-10156 135.00 HP2 (NRR 21) Non-Electronic Hearing Protector, Blue L11-10361 19.95 Hearing HP2 Hearing Protector, Black L11-10360 19.95 Protector HP1/HP2 Replacement Ear Cushions L11-19022 10.00 Belt Clip Hearing Protector Belt Clip L11-13020 3.29 8 SQUARE DEAL ‘B’ STANDARD FEATURES: • Automatic Indexing • Available in 18 Handgun Calibers • Loading Rate: 400-500 Rds./Hr. • Comes With One Caliber Conversion • Automatic Powder Measure SDB DVD • Automatic Primer System Instruction Manual • Comes Complete With Dies L11-19482 $19.95 • Factory Adjusted, Ready-to-Use • Lifetime “No-B.S.” Warranty • RISK FREE 30-Day Trial Period! All for ONLY... $38495*

Total price as pictured here with optional accessories below: $560.75 SDB Strong Mount L11-22223 $64.95 Low Powder Sensor L11-16306 $41.95 Aluminum Bullet Tray L11-22214 $41.95 SDB Tool Holder with Wrench Set L11-19441 $26.95 “SDB” Stock Numbers .32 S&W Long/H&R Magnum* L11-16815 $414.95 .380 ACP L11-20053 .38 Special L11-20102 .357 Magnum L11-20103 .38 Super L11-20099 .38 Super Comp L11-20115 9mm L11-20104 .40 S&W L11-20787 10mm L11-20643 .41 Magnum L11-20054 .44 Special L11-20105 .44 Magnum L11-20052 .44-40 Winchester L11-21036 .45 ACP L11-20101 .45 Colt L11-20051 .45 GAP L11-20098 .45 S&W Schofield L11-20418 SQUARE DEAL ‘B’ ACCESSORIES 9 A. SqUARE DEAL ‘B’ CONvERSION kITS E. PRIMER PICkUP TUBES Change from one Used to transfer primers F. caliber to another A. from flip tray to priming in minutes. Con- system. version includes 1 Lg. tube L11-22029 $7.99 carbide size die 1 Sm. tube L11-22028 7.99 2 Sm., 2 Lg. L11-20056 23.95 (except .44-40), 4 Lg. tubes L11-20050 23.95 expander/ powder 4 Sm. tubes L11-20049 23.95 E. funnel, seat die, F. PRIMER FLIP TRAy crimp die, A heavy, high-quality tray large enough for the shellplate and Federal primer package. L11-13606, $20.95 each locator buttons. g. MACHINE COvER .32 S&W Long/H&R Mag. L11-16774 $96.95 G. (.32 S&W Requires X-Small Powder Bar L11-20780 $29.95) This great looking nylon cover .380 ACP L11-20246 86.95 adds security to your loading .38 Special L11-20240 86.95 bench. Your reloader will be pro- .357 Magnum L11-20240 86.95 tected against more than dust as .38 Super L11-20229 86.95 these covers come with a D-ring .38 Super Comp L11-20275 86.95 that allows the heavy duty zipper 9mm L11-20241 86.95 to be locked. .40 S&W L11-20469 86.95 Machine Cover, 10mm L11-20469 86.95 L11-13795, $23.95 .41 Magnum L11-20247 86.95 (H.) Master lock, .44 Special L11-20242 86.95 .44 Magnum L11-20242 86.95 L11-13083, $3.95 H. .44-40 Winchester L11-21035 86.95 .45 ACP/.45 GAP L11-20123 86.95 .45 Colt L11-20248 86.95 I. I. LOW POWDER SENSOR .45 S&W Schofield L11-20417 86.95 Provides an audible and visual SqUARE DEAL ‘B’ qUICk CHANgE (Not reminder when it’s time to refill Pictured) Toolhead and powder measure. your powder reservoir. When the L11-16378, $99.95 powder level drops to about 1000 ‘SDB’ POWDER MEASURE L11-20001, $76.95 grains, a buzzer will sound and a bright red LED will light. B. SqUARE DEAL ‘B’ B. L11-16306, $41.95 TOOLHEAD Extra toolheads keep all your adjustments J. MACHINE the way you left MAINTENANCE J. them. kIT L11-20113, $31.95 Everything you need to keep your Dillon loader cleaned and lubri- C. SqUARE DEAL BENCH WRENCH cated up to factory The Square Deal specifications. Bench Wrench Available in combi- C. has the correct nation with a spare sizes for Square parts kit for your machine. Deal “B” die Maint. Kit/SDB Spare Parts Kit L11-97015, $35.95 adjustments. L11- 19970, $8.95 k. SDB SPARE PARTS kIT each. Buy two or Don’t risk downtime more, $8.10 each. waiting for a replace- ment part! D. CARTRIDgE CASE 1 SD Shellplate Bolt BIN & BRACkET 1 SD Ejection Wire 4 SD Wave Bearings Ergonomically 1 Toolhead Friction Plate 2 Pistol Decapping Pins designed to cut your 2 Magazine Orifices, Large workload through 1 Small Primer Seat Punch 1 SD Slide Return Spring 2 Pickup Tube, Large, Green Tips economy of motion! 1 #10 Tinnerman Insert 1 3/16” Index Ball Attaches to all Strong- 1 Bellcrank Cube 2 Magazine Orifices, Small 4 Locator Pins (#1, #2, #3, #4) 2 Retaining Clips Mount-equipped 1 Indexer Return Spring 1 SD Index Lever Assembly SDBs. 1 Large Primer Seat Punch 2 Dispensing Tips, Large D. L11-11672, $24.95 1 Primer Seat Punch Spring 2 Dispensing Tips, Small 2 Pickup Tube, Small, Yellow Tips L11-20778, $21.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 10 NINE IS THE NEW .22: CMMG Mk9 T

Reviewed by Peter Caroline includes a short length of rail that you can attach, It wasn’t that many years ago when I could so you can hang on all sorts of tactical thingies as walk into my local Walmart and pick up a 525- you choose. What you won’t find under the hand- round bulk-pack of Federal .22 LR for all of $8.88. guard is a gas system, because the Mk9 T has a And I could buy as many as I wanted…there was a simple . This is A Good Thing… whole pallet of the stuff sitting out back. straightforward and easy to take down and clean. That was then and this is now. Now, I can go to Just pull out the captive rear takedown pin, pull the gun show, and some charitable soul will allow out the bolt/carrier assembly and the charging me to buy a brick of who-knows-what .22 LR at handle, and you’re good to go. It’s caveman sim- the bargain price of fifty bucks. There are many ple, with no other plumbing to mess with. The gun reasons for this shortage, ranging from plausible to weighs a bit over six pounds and, with the total Bravo Sierra, but it appears that the days of adjustable buttstock, goes from 31.5” to nearly cheap plinking, target practice or varmint control 35” in length. with .22s are over, gone, finito. Another nice feature of the Mk9 T is a magazine There is hope, however, for us budget-minded well that was actually designed for a 9mm maga- (i.e., cheapskate) shooters. Mark Pixler now zine, in this case the Colt-pattern 32-round stick. I informs me that 9mm Luger is the new .22 LR, initially tried loading the two mags that came with and he’s the Editor for Lord’s sake, and an author- the gun, using my Uplula magazine loader. For ity to be reckoned with. When you figure that some reason, the magazines didn’t like that tool, so most .22 ammo nowadays goes for 10 cents or I switched to the old tried-and-true stuff ‘em in by more per round, reloadable 9mm starts to look hand method, which was surprisingly easy. pretty good as plinking fodder…at least until Dil- The Mk9 T comes without sights, so I installed a lon comes out with a .22 LR progressive press, bargain basement red dot sight with a 1” riser and but don’t hold your breath. headed for the range. I brought a variety of 9mm While my .22s are gathering dust in the gun- Luger ammo…Winchester PDX1 Defender 147- room, I’ve been testing out Mark’s theory with an grain JHP, Winchester Value Pack 115-grain FMJ, interesting 9mm carbine, the CMMG Mk9 T. Like Winchester Defender 147-grain JHP, Italian-made everything else nowadays, this carbine looks like Perfecta 115-grain FMJ, Corbon +P 125-grain JHP your basic AR-15/Modern Sporting Rifle. It has a and some odd NATO-surplus FMJs with a “VPT” dull black finish, 16” barrel, a six-position headstamp. I set up my portable benchrest and adjustable buttstock and a free-floating aluminum sandbag, and a 14” metal gong with a stick-on fluo- KeyMod handguard, which is slimmer and more rescent dot at 25 yards. I also brought along a bag easy on the hands than the traditional Picatinny of used golf balls, always fun targets. configuration. There is a full-length Picatinny rail I’m happy to report that the Mk9 T performs topside for flexible sight installation. CMMG even like a champ. pull measured 5-1/2 to 6 NINE IS THE NEW .22: CMMG Mk9 T 11 The CMMG Mk9 T could be very useful as a training rifle…it’s not in the least bit intimidat- ing for begin- ners. It’s cer- tainly a fun plinker, and it’s compact enough to be quite appropriate pounds on my for indoor home RCBS scale. The defense, with enough gun happily ate power, but little likeli- everything I fed it hood of over-penetration. without any hesitan- I do like this little carbine. It’s accurate, reli- cy. And the recoil – or able, very pleasant to shoot, and finding afford- lack thereof – makes this able ammunition poses no problem. And, it’s an ideal training carbine for every- made right here in the USA. MSRP is $1,149; real- one in the family. Think of .22 LR, world prices will vary. only louder. Once I got the red dot CMMG Inc. sight zeroed in, I could tear up the P.O. Box 369 center of the fluorescent orange dot Fayette, MO 65248 with great regularity. Golf balls simply disappear www.cmmginc.com into another dimension when hit squarely. This is Customer Service: 660-248-2993 dandy fun. Email: [email protected] DP 12 ABSOLUTE. PREMIUM. PROTECTION. WILEY X PROTECTIVE EYEWEAR

Romer 3 $95 WX Valor $95 WX Saint $95 3-Lens Pkg., Smoke Grey, Clear, 3-Lens Pkg., Smoke Grey, Clear, 3-Lens Pkg., Smoke Grey, Clear, Light Rust L11-12104 Light Rust L11-12105 Light Rust L11-12102

WILEY X PROTECTIVE EYEWEAR MEETS ANSI, EN166 AND MILITARY VO BALLISTIC STANDARDS $999

Bomber Glasses’ lenses and Clear L11-10513 frames are made from High- Smoke L11-10514 Index Polycarbonate that is Light Blue L11-10515 durable, flexible and impact Yellow L11-10516 resistant. All colors provide Amber L11-10517 Bomber Glasses UV protection. Smoke Mirror L11-10518 EP3 Sonic Defenders Barrel-Lite® MAX Earplugs L11-10529 By SureFire $4.95

ar Pro EP3 Sonic Defenders® Eby SureFire® protect you against loud, harmful noises, yet allow normal conversations to be heard; and the soft, hypoal- Winchester lergenic polymer provides all- day comfort. NRR 24 Sm. EP3 Sonic Defenders Hearing Protection L11-25340 $12.95 Med. EP3s (Fit Most People) NRR 33 200 Pair Pink Corded Ear Plugs L11-25341 $12.95 Lg. Sonic Defenders L11-10456 $40.00 L11-19670 $1.99 L11-25342 $12.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Spares, Accessories & Upgrades 13 BL 550 for AT 500s, BL 550s & RL 550Bs AUTO PRIME SySTEM Dillon’s Includes: Dillon’s Primer Housing /Shield Primer Slides, Large/Small Basic Loader Pickup Tubes, Large/Small Pickup Tube Tips, Large/Small Magazine Tubes, Large/Small Mag. Orifices, Large/Small Operating Rod Primer Track Bearing Housing Screws Ret. Spring Retaining Pin L11-16627, $82.95 PRIMER SySTEM EARLy WARNINg kIT Allows you to focus on loading instead of worrying about failing to seat a primer, and is an easy slip-on attachment to the auto prime system. $25995 L11-20302, $25.95 AUTO POWDER SySTEM L11-15399 Accurate to within 0.1 grain, Reloading Dies and Caliber Con- our Automatic Powder Measure is versions sold separately world renowned for its charge-to- (see the back of the order blank charge consistency. in the center of The Blue Press). L11-20251, $87.95 Pictured with optional accessories: OPTIONAL MAgNUM RIFLE Strong Mount L11-22051 $47.95 POWDER BAR L11-21353, $29.95

AUTO EJECT SySTEM Greatly increases your illon’s RL 550B has long worn the title of “The ammo production capabilities DWorld’s Most Versatile Progressive Reloader,” and and adds a Cartridge stripping it down to its most basic form – Dillon’s BL Chute/Bracket and a Cartridge (Basic Loader) 550 – adds a whole new dimension Bin to your reloader. of versatility for the shooter/hunter who needs to L11-22120, $30.95 feed several rifles. The BL 550 is essentially an RL 550B without the AT 500 POWDER DIE automatic priming and powder systems. Capable of Extra powder dies allow you to loading over 160 calibers – just like the RL 550B – it move your powder measure from tool- uses any manufacturer’s standard 7/8” x 14 reloading head to toolhead without changing the dies. It’s priced comparably with other manufacturers’ “belling” adjustment. turret presses; yet unlike them, it’s fully upgradeable Powder Die: L11-16629, $19.95 to Dillon’s Progressive RL 550B loader! Oversize Die: L11-16626, $19.95 The interchangeable toolhead (Page 15) makes it Plastic Funnel: L11-16617, $5.95 quick, easy and inexpensive to change calibers. For example, if you load .30-06 for elk, .243 for deer and POWDER MEASURE .22-250 for coyotes, you don’t even have to change ADAPTER the shellplate. You simply pull two pins and swap the If you load rifle car- toolhead with your .30-06 dies to another toolhead tridges with long-grain with your .22-250 or .243 dies in less than 30 sec- extruded powder, you can onds! The additional toolheads are $22.95 each, or now use any manufactur- $20.95 each if you buy three or more – if you load for er’s powder measure with several rifles it’s a no-brainer! Once you get your dies 7/8” x 14 threads on your adjusted, you’ll never have to re-set them. RL 450, AT 500, BL 550 or A powder measure adapter (bottom right photo) is RL 550B. (Requires the use of an RL 450 powder available if you want to use a manual measure that die – see below.) you already own. Or, if you want to weigh every L11-20029, $22.95 powder charge you load, it’s easy – you can use a RL 450 Powder Die: powder trickler with the powder die/funnel assembly L11-20308, $21.95 that comes with the BL 550. 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 14 RLRL 550B550B STANDARD FEATURES: • Accommodates Over 160 Calibers • Uses Standard 7/8” x 14 Dies RL 550B DVD • Loading Rate: 500-600 Rds./Hr. Instruction Manual L11-19483 $19.95 • Comes With One Caliber Conversion • Interchangeable Toolhead Assembly • Automatic Powder Measure • Automatic Primer System • Lifetime “No-B.S.” Warranty • RISK FREE 30-Day Trial Period! All for ONLY... $43995*

L11-14261 Reloading dies sold separately. *Prices vary on exotic-caliber machines.

Total Price as pictured here with optional accessories: $737.60 .45 ACP Die Set L11-14404 $64.95 Strong Mount L11-22051 $48.95 Alum. Roller Handle L11-17950 $45.95 Low Powder Sensor L11-16306 $41.95 Aluminum Bullet Tray L11-22214 $41.95 RL 550 Toolholder with Wrench Set L11-11541 $28.95 Cartridge Case Bin/Bracket L11-11185 $24.95 H. RL 550B CASEFEEDER UPgRADE 15 RL 550B ACCESSORIES Available for most pistol cartridges – A. RL 550B will not work with rifle cartridges. CALIBER Large Pistol L11-14450 CONvERSION kITS Small Pistol L11-14451 Contains: $264.95 (110v US Model) Shellplate, powder Large Pistol L11-14453 funnel and locator Small Pistol L11-14454 buttons. Available $274.95 (220v Euro Model) in all calibers; CASEFEEDER CALIBER CONvER- please specify cal- SIONS (Page 17) H. A. iber desired. $23.95 each L11-RL550B CON- I. PRIMER FLIP TRAy VERSION $45.95 (Exotic calibers, $55.95) I. L11-13606, $20.95 each B. AUTO POWDER J. PRIMER PICkUP TUBES MEASURE SySTEMS B. 1 Lg. tube L11-22029 $7.99 Additional powder 1 Sm. tube L11-22028 7.99 measures stay on the J. 2 Sm., 2 Lg. L11-20056 23.95 4 Lg. tubes L11-20050 23.95 toolhead. Never change 4 Sm. tubes L11-20049 23.95 powder measurements again! k. 550 SPARE PARTS kIT RL 550 Powder Measure 1 Seating Punch, Small L11-20782, $76.95 ea. 1 #10 Tinnerman Insert 1 Primer Cup, Large Magnum Rifle Powder Bar 1 Primer Cup, Small K. L11-21353, $29.95 each 1 Bellcrank Cube X-Small Powder Bar 1 3/8” Index Ball L11-20780, $29.95 each C. 1 550 Brass Tip Set Screw 1 550 Ejector Wire C. DELUxE qUICk 1 Cartridge Retaining Spring 2 Pickup Tube, Large, Green Tips CHANgE ASSEMBLy 1 550 Slide Return Spring 2 Magazine Orifices, Small 4 Locator Pins (#1, #2, #3, #4) 1 550 Primer Cup Spring With a quick change 1 Seating Punch, Large 2 Retaining Clips assembly and a caliber 1 550 Index Ball Spring 2 Dispensing Tip, Large conversion kit (SOLD 2 Pickup Tube, Small, Yellow Tips 2 Dispensing Tip, Small 2 Magazine Orifices, Large 1 Failsafe Bushing Rev. B SEPARATELY), you can convert in less than a 1 Toolhead Pin L11-20048, $18.95 minute. Complete with: • Toolhead L. MACHINE MAINTENANCE kIT • Powder Measure Provides you with everything • Powder Die you need to keep your Dil- • Toolhead Stand lon loader cleaned and lubri- Price without Dies, L11-22058, $103.95 cated up to factory specifica- Loading dies sold separately on Pages 34, 35 & 52. tions. Available in combina- tion with a spare parts kit for D. POWDER DIES your machine. D. Extra powder dies allow you to Maint. Kit & RL 550B Spare Parts Kit L11-97016, $32.95 move your powder measure from toolhead to toolhead M. LOW POWDER SENSOR without changing the “belling” Provides an audible and visual adjustment. reminder when it’s time to refill your powder reservoir. When the M. L11-20064, $11.35 each E. Three or more, $10.25 ea. powder level drops to about 1000 X-Large Powder Die, L11-21253, $19.95 each grains, a buzzer will sound and a bright red LED will light. E. TOOLHEADS L11-16306, $41.95 Don’t adjust dies when switching calibers. These precision tool holders hold your dies in N. EqUIPMENT DUST COvERS perfect alignment, making caliber changes N. This packcloth nylon machine cover quick and easy. comes equipped with a D-ring, allow- L11-13909, $22.95 each ing the heavy duty zipper to be locked. Three or more, $20.95 ea. RL 550B Cover, L11-13795, $23.95 F. TOOLHEAD STANDS (O.) Master lock, L11- The ultimate in conven- 13083, $3.95 ience for keeping your Quick-Change Cover (for reloading bench clean and use with powder measure) uncluttered. L11-11143, $14.95 F. L11-22055, $20.95 each O. Three or more, $18.95 ea. P. UNIvERSAL MOUNTINg HARDWARE kIT g. 1” BENCH WRENCH G. Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4 L11-10842, $7.95 each Flat Washers, 4-Fender Washers, 2-Wood Screws. Two or more, $7.10 ea. L11-14355, $5.49 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 16 Dillon Reloading Accessories illon’s Reloading Accessory Package Deals include: either Dillon’s DD-Terminator Electronic Scale or Eliminator Balance Beam Scale, a Dial Caliper, a Primer Flip Tray, a Bench Wrench, an 8 oz. bottle of Case Lube, a pair of clear safety glasses, a machine cover and the latest edition of the Lyman Reloading Handbook. SDB (Balance Beam Scale) L11-14482 $182.95 SDB (Electronic Scale) L11-14483 251.95 RL 550B (Balance Beam Scale) L11-21143 181.95 RL 550B (Electronic Scale) L11-22117 250.95 XL 650 (Balance Beam Scale) L11-21430 197.95 XL 650 (Electronic Scale) L11-22118 266.95

illon’s Toolholders are available for your RL 550B, XL 650, SL D900, and Square Deal B, and ensure that the tools you need to service your reloader are handy and organized. No more dig- ging around your bench trying to find the right size hex wrench! XL 650/SL 900 with Wrench Set L11-11555 $29.95 XL 650/SL 900 w/o Wrench Set L11-11554 18.95 RL 550 with Wrench Set L11-11541 28.95 RL 550 w/o Wrench Set L11-11543 17.95 Casefeed 550, with Wrench Set L11-11540 28.95 Casefeed 550, w/o Wrench Set L11-11542 17.95 Square Deal B with Wrench Set L11-19441 26.95 Dipped Ball-End Hex Wrenches L11-11483 17.95 One-Inch Bench Wrench L11-10842 7.95 Square-Deal-Only Wrench L11-19970 8.95

illon’s illon’s “Belted illon’s DStrong DMagnum” Powder DRoller Mounts System features a max- Handle gives increase your imum-capacity steel your reloader machine’s powder bar that can an entirely new “footprint” to dispense more than “feel,” reduces over 10”, 100 grains of extruded operator spreading the load over the whole IMR powder. Magnum fatigue, and bench instead of stressing the leading rifle cartridges can re- makes primer edge. For XL 650 owners with limited quire from 70 grains to seating easier. overhead clearance, the XL 650-only well in excess of 100 Alum. Roller L11-17950 $45.95 mount raises the machine 6” above grains for a single Plastic Roller L11-22183 40.95 the bench top. All mounts come with charge. We tested this all the fasteners necessary to mount system with various extruded rifle your machine and are coated with a powders and found that powder durable black wrinkle finish. charge variations stayed within plus- RL550/XL650 L11-22051 $48.95 or-minus three-tenths of a grain. XL650-only L11-22052 45.95 Magnum Powder System Square Deal “B” L11-22223 64.95 L11-97126 $142.95

illon’s Low DPowder Sen- sor provides an audible and visual reminder when it’s time to refill your Quick-Change Cover for use with powder reservoir. powder measure. L11-11143 $14.95 When the powder level drops to ith Dillon’s RL 450 Upgrade illon’s Bullet Tray is a simple, about 1,000 grains Wcomponents, you can, either all Dshallow aluminum bullet tray remaining in the at once or one assembly at a time, designed and located for economy of reservoir, a buzzer will sound and a upgrade your RL 450 reloader to an motion. Our tray works on the Square bright red LED will light. Designed to RL 550B! Deal “B”, RL 550B and XL 650 when fit all Dillon powder measures. Made RL 450 Upgrade Components equipped with the RL 550/XL 650 of clear polycarbonate, it simply Frame Change L11-20094 $94.95 Strong Mount, and a separate kit is replaces the die-cast metal lid sup- Powder Failsafe L11-20251 87.95 available for the RL 1050. plied with the measure, and operates Auto Prime L11-20055 85.95 Bullet Tray Kit L11-22214 $41.95 on two AAA batteries (included). Auto Eject L11-20002 59.95 RL 1050 Tray Kit L11-22215 41.95 L11-16306 $41.95 Primer Warning L11-20302 25.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com A Casefeeder Dillon’s 17 UPGRADE Stainless for YOUR Steel Case Gages

RL 550B .223 Remington L11-13254 $26.95 .308 Winchester L11-12867 27.95 .30-06 Springfield L11-12679 28.95 .380 ACP L11-15160 15.45 9mm Parabellum L11-15161 15.45 .38 Super L11-15158 15.45 .38 Special L11-15159 15.45 .357 Magnum L11-15163 15.45 .40 S&W L11-15164 15.45 10mm L11-15162 15.45 .44 Magnum L11-15165 15.45 $ 95* .45 ACP L11-15166 15.45 264 .45 Colt L11-15167 15.45 110 Volt US Model .45 GAP L11-12672 15.45 Large Pistol L11-14450 Small Pistol L11-14451 L. E. Wilson Case Gages, Deburring Tool 220 Volt Euro Model, $274.95 .22-250 L11-12718 $36.00 Large Pistol L11-14453 .243 L11-12828 36.00 .25-06 L11-11760 36.00 Small Pistol L11-14454 .270 L11-11828 36.00 *Caliber Conversions sold separately. 6.8 SPC L11-19522 36.00 .30 Carbine (Case Length Only) L11-18784 36.00 .30-30 L11-12924 36.00 7.62 x 39 L11-14901 36.00 7mm Mag. L11-12336 46.00 .300 AAC Blackout L11-19515 36.00 .300 Win. Mag. L11-11752 46.00 .300 WSM L11-18709 36.00 .357 SIG L11-18708 36.00 .38-40 Winchester L11-10682 36.00 .44-40 Winchester L11-10697 36.00 .50 Browning MG L11-14447 60.00 Deburring Tool L11-16038 $20.00 Attain Peak Accuracy With Hornady’s Caliber Conversions L-N-L O.A.L. Gauge and Bullet Comparator for the (Caliper not included) RL 550B Casefeeder $23.95 Each .25-20/.32-20 Winchester L11-14206 .30 Mauser/7.62x25 L11-14204 Overall Length gauge Bullet Comparator .32 S&W Long L11-14205 The initial distance a bullet Correct bullet seating depth is .32 H&R Magnum L11-14283 must travel when fired (from critical to accuracy. In addition, the cartridge case mouth until it minor variations in bullet seat- 9mm/9x21/.38 Super/.30 Luger L11-14284 engages the rifling) is absolutely ing depth will have an effect on 10mm/9x25 Dillon L11-14285 critical to achieving peak accu- both pressure and velocity. .38 S&W L11-14208 racy. Bullet Comparator .38 Super Comp. L11-14287 Straight L11-14622 $38.95 L11-14670 $16.95 .38/.357 Magnum L11-14286 Curved (use for auto, lever and Comparator Insert (required) .357 SIG/.40 S&W L11-14289 pump rifles) L11-14862 $39.95 $8.95 each .38-40/.44-40 Winchester L11-14288 Modified Case (required) .22 caliber L11-14672 $6.99 each .24 caliber L11-14673 .41 Magnum L11-14290 .223 Rem. L11-14627 .25 caliber L11-14674 .44 Russian L11-14209 .22-250 L11-14628 .26 caliber L11-14675 .44 Special/.44 Magnum/.44 Colt L11-14291 .243 Win. L11-14631 .27 caliber L11-14676 .45 GAP L11-11441 .270 Win. L11-14641 .28 caliber L11-14677 .45 ACP/.40 Super/.400 Cor-Bon L11-14292 7mm Rem. Mag. L11-14648 .30 caliber L11-14678 .45 Auto Rim L11-19140 .308 Win. L11-14652 .33 caliber L11-14679 .30-06 L11-14653 .35 caliber L11-14680 .45 Colt/.45 S&W/.454 Casull L11-14279 .300 Win. Mag. L11-14655 .37 caliber L11-14681 .45 Winchester Magnum L11-14210 .45 caliber L11-14682 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 18Dillon’sDillon’s CaseCase PreparationPreparation EquipmentEquipment CV-750 L11-19455 $144.95

CV-2001 L11-20493 $188.95

CV-2001 – The Industry Standard Limited Work Space? Dillon’s CV-2001 Vibratory Case Cleaner is the Dillon’s introducing the new CV-750 heavy duty largest in the industry. Its 12-1/2 quart bowl capacity Vibratory Case Cleaner for those with limited space. will allow you to polish up to 1,300 .38/.357 or 550 This new case cleaner uses the same motor as the .30-06 cases per hour. CV-2001 and is every bit as tough – just more com- Not only is our capacity greater, but our motor is pact. To accompany the CV-750, the CM-500 does larger in horsepower, internally cooled, thermally the same job as the larger CM-2000 Case/Media Sep- protected, and turns on precision ball bearings. This arator; and, like the CV-750, handles just about half is no “hobby” machine! the capacity of the larger unit. The bowl and base are constructed of 7/32” thick injection molded high-strength polypropylene which is impact and abra- sion resistant. Case/Media Separators After we sold thousands of our famous first generation FL-2000 case cleaners, cus- tomers who had purchased them began asking us to address the problem of sepa- rating the cleaned and polished brass from the cleaning media. We knew from the beginning that the simplest method of separating would be a rotating squirrel cage, but we had to find a design we could manufacture economical- ly. Our problem was that it had to be BIG – big enough to handle the entire load of the FL-2000 series case cleaners. CM-2000 Case/Media Separator L11-20675 $75.95 The solution was an injection molded CM-500 Case/Media Separator L11-21045 $47.95 reversible part. Simple, and it works great. Our device is large, Although scaled down in size, these two pieces of 10” x 14”, and will hold more equipment are every bit as tough as their full-sized than 1,600 .38 Special cases. It counterparts. We used the same materials in their sits on a large media collection construction and designed them to work just as hard tub that measures 18” x 22”. – and do it in a more compact area! The tub keeps the mess off the floor and bench. Attention European Customers: It’s fast – so fast it will remove media from 1500 Case Cleaners are available in 220 volt! rounds of .223 brass in a matter Euro Cv-2001 L11-22047 $213.95 of seconds. Euro Cv-750 L11-19473 $169.95 All Dillon CV-2001 and CV-750 Vibratory Case Cleaners have a One-Year Warranty on the electric motor. Rapid Dillon 19 Polish Case 290 Lube SHINE? You bet your brass! Rapid Lube 5000, Dillon’s Dillon Precision has devel- aerosol cartridge case lubri- oped another exciting new cant, has been replaced by product to make your reload- an “environmentally cor- ing faster and easier. Rapid rect,” non-aerosol case lube. Polish 290 is the first cartridge It works the same: Simply lay case finish designed specifi- your cases out, spray lightly cally to bring a brilliant shine with one or two passes and (20 percent brighter than tum- you’ve done it. No mess, no bling media alone) and a pro- guesswork. Within minutes tective coating to reloaded the lubricant distributes ammunition. Simply add several capfuls to the itself around the cartridge media in your tumbler and run. Rapid Polish 290 cases and you’re ready to load. Try a bottle. has a great residual value and stays in your tum- You’ll never use a grease pad again. bling media. You’ll use less each time you clean D.C.L. Dillon Case Lubricant your cases. Rapid Polish 290 contains no ammonia, so it 8 oz. bottle L11-13733 $8.95 won’t weaken brass cases! Case (20 pc.) L11-20256 135.95 Rapid Polish 290 8 oz. bottle. L11-13804 $8.95 Half and Half 10 bottles of polish /10 of lube Case (20 pc.) L11-20255 135.95 Case (20 pc.) L11-21375 $135.95 Don’t Forget Polishing Media! Crushed walnut hull polishing media – Ground corn cob polishing media – quickly cleans even the dirtiest of cases. the best there is for that final polish. 15-pound bag L11-13287 $23.95 10-pound bag L11-13496 $15.95

This month’s cover features Erin with an Armi San Marco SA revolver in .45 Colt. To see more photos of Erin and other Blue Press cover models, you can “follow” us on Instagram@bluepress on your smart phone, or go to www.instagram.com/bluepress and click “follow.” DP 20XLXL650650 STANDARD FEATURES: • Automatic Indexing • Uses Standard 7/8” x 14 Dies • Loading Rate: 800-1000 Rds./Hr. • Comes With One Caliber Conversion • 5-Station Interchangeable Toolhead • Automatic Powder Measure • Automatic Primer System • Lifetime “No-B.S.” Warranty • RISK FREE 30-Day Trial Period! All for ONLY... $56695* L11-650 XL 650 DVD Reloading dies sold separately. Instruction Manual *Prices vary on exotic-caliber machines. L11-19484 $19.95

Total price as pictured here with optional accessories: $1129.55 Electric Casefeeder L11-210** $219.95 Powdercheck System L11-21044 $68.95 .45 ACP Die Set L11-14404 $64.95 Strong Mount (550/650) L11-22051 $48.95 Aluminum Roller Handle L11-17950 $45.95 Low Powder Sensor L11-16306 $41.95 Aluminum Bullet Tray L11-22214 $41.95 xL 650 Toolholder with Wrench Set L11-11555 $29.95 XL 650 Accessories 21 A. xL 650 CALIBER A. k. CASEFEED ASSEMBLy CONvERSION kITS Specify large pistol, small pis- Include shellplate, tol, large rifle or small rifle. locator buttons, pow- $219.95 (110v), der funnel and case- $229.95 (Euro. 220v) feed adapter parts. Available in most cal- L. ExTRA L. ibers; please specify CASEFEED caliber desired. PLATES (You MAY need a different casefeed plate, see item L.) $38.95/49.95 L11-XL650 CONVERSION (Specify Caliber) $77.95* *(All belted magnums and exotic calibers, $87.95 ea.) xL 650 Casefeed Assembly Large pistol (110v) L11-21080 (Euro. 220v) L11-97025 Large rifle (110v) L11-21081 (Euro. 220v) L11-97022 B. B. POWDER MEASURE Small pistol (110v) L11-21079 (Euro. 220v) L11-97021 L11-20782, $76.95 each Small rifle (110v) L11-21082 (Euro. 220v) L11-97023 Magnum Rifle Powder Bar xL 650 Casefeed Plate L11-21353, $29.95 each Large pistol L11-21072 $38.95 X-Small Powder Bar Large rifle L11-21075 38.95 L11-20780, $29.95 each Magnum rifle L11-18492 49.95 C. Small rifle L11-21074 38.95 C. POWDER CHECk Small pistol L11-21073 38.95 L11-21044, $68.95 each Three or more, $61.95 ea. M. MACHINE MAINTENANCE kIT D. qUICk CHANgE Everything you need to Toolhead, TH Stand and Pow- keep your Dillon loader cleaned and lubricated up D. der Measure L11-22059, $107.95 to factory specifications. Available in combination with a spare parts kit for E. PRIMER PICkUP TUBES your machine. Maint. Kit & XL 650 Spare Parts Kit L11-97017, $39.95 Used to transfer primers F. from flip tray to priming N. SPARE PARTS kIT system. Don’t risk downtime 1 Lg. tube L11-22029 $7.99 waiting for a replace- 1 Sm. tube L11-22028 7.99 ment part! 2 Sm., 2 Lg. L11-20056 23.95 1 Priming Station Locator Tab 4 Lg. tubes L11-20050 23.95 1 650 Ejector Wire 1 Slide Spring Pin 4 Sm. tubes L11-20049 23.95 E. 1 Indexer Spring F. PRIMER FLIP TRAy 1 650 Primer Indexing Arm 1 650 Index Pawl A heavy, high-quality tray large enough for the 1 650 Primer Cam 1 Indexing Arm Spring Federal primer package. 1 650 Ring Indexer 1 Index Ball Spring 2 Pistol Decapping Pins 2 Pickup Tube, Small, Yellow Tips L11-13606, $20.95 each 1 650 Index Spring Revision A 1 650 Tool Head Pin 1 #10 Tinnerman Insert 2 Pickup Tube, Large, Green Tips G. g. TOOLHEAD STANDS 1 Index Arm Bowed Washer 1 Primer Cup Spring 1 Short Lever Spring 2 Retaining Clips The ultimate in convenience 1 Bellcrank Cube 2 650 Shellplate Cap for keeping your reloading 1 3/8” Index Ball 1 650 Primer Support Shim bench clean and uncluttered. 1 Powder Bar Spacer Plug 1 Case Insert Slide Spring Cap 1 650 Brass Tip Set Screw 1 Priming Station Locator Tab L11-22055, $20.95 each 4 Locator Pins (#1, #2, #3, #4) Bushing Three or more, $18.95 ea. 1 5/16” Index Ball 2 Dispensing Tips, Large 1 Tab/Spring Arm Spring 2 Dispensing Tips, Small H. TOOLHEADS 1 Case Insert Slide Spring 1 Failsafe Bushing Revision B I. 1 650 Pawl Spring L11-13863, $27.95 each L11-21146, $25.95 Three or more, $25.95 ea. O. EqUIPMENT DUST COvERS O. I. POWDER DIES This packcloth nylon machine cover Extra powder dies allow you to comes equipped with a D-ring, allowing move your powder measure from the heavy-duty zipper to be locked. H. toolhead to toolhead without XL 650 Cover, L11-10443, $39.95 changing the “belling” adjustment. (P.) Master lock, L11-13083, $3.95 L11-20064, $11.35 each, three or more, $10.25 ea. Quick-Change Cover (for use with X-Large Powder Dies, L11-21253, $19.95 each powder measure) L11-11143, $14.95

J. xL 650 PRIMINg SySTEM (Not Pictured) P. Small Priming System L11-21065 $80.95 Q. q. LOW POWDER SENSOR Large Priming System L11-20982 80.95 Provides an audible and visual reminder when it’s time to refill your DON’T FORgET ONE OF THESE! powder reservoir. Universal Mounting Hardware Kit L11-14355 $5.49 1” Bench Wrench L11-10842 7.95 L11-16306, $41.95 Buy two or more Bench Wrenches for $7.10 each 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 2222Color Coded Aluminum Toolheads for Your RL 550B & XL 650

Blue Anodized RL 550B Toolhead L11-62132 $29.95 Blue Anodized XL 650 Toolhead L11-62136 $34.95 Black Anodized RL 550B Toolhead L11-62133 29.95 Black Anodized XL 650 Toolhead L11-62137 34.95 Gold Anodized RL 550B Toolhead L11-62134 29.95 Gold Anodized XL 650 Toolhead L11-62138 34.95 Silver RL 550B Toolhead L11-62135 29.95 Silver XL 650 Toolhead L11-62139 34.95

CAST LEAD BULLETS Made from Certified Analysis Foundry Alloy Handgun and Rifle Bullets 5% Dillon Discount! Enter BluePress in promo www.missouribullet.com box during online checkout “Hardness-Optimized” Wide Selection! 816-597-3204 The widest selection of bullets to choose from Flat Rate Shipping Flat Rate Priority Shipping! 65 lbs. @ $14.00 Anywhere in the US - 65 lbs @ $14.00 Delivery Assurance Guarantee! NEW! We will replace your order if not received in 14 days Hi-Tek Coated Bullets Quality Products! Bullet Casting Alloy We optimize bullet hardness for your intended application also available.

Discounts to Clubs, Dealers, Law Enforcement and Military Personnel www.missouribullet.com Dillon’s New Rapid Trim 1500 Case Trimmer23

Dillon’s he RT 1500 is used just like disconnect power cord; and it RT 1500 Ta standard size die. The big can be used on any standard shown difference is that while you are reloader, single stage or pro- installed pushing the case into the die to gressive. on an XL 650. size it, an electric motor driving The RT 1500 Case Trimmer a carbide cutter at 4500 RPM is Assembly L11-62164 is trimming the case to length. $327.95. (Available only in 110 Chips are drawn off through a volt 60 hz.) Size/trim dies are vacuum manifold that clamps sold separately (Please see chart to the outside of the special below). Replacement carbide size/trim die. (Vacuum cleaner cutting blades, L11-13141, are and hose not included.) The RT $19.95 each. Upper lock rings, 1500 is equipped with a quick- L11-13559, are $4.99 each. RT 1500 & 1200B Size/Trim Die Calibers .204 Ruger L11-21028 $58.95 .222 Rem. L11-21363 58.95 .223 Rem. L11-20107 50.95 .223 Rem. Carbide L11-19797 175.00 .220 Swift L11-21364 58.95 .22-250 Rem. L11-20110 55.95 .243 Win. L11-20109 55.95 .25-06 Rem. L11-21367 58.95 6.5 x 55mm L11-21495 58.95 Short Trim Die Toolheads .270 Win. L11-20112 55.95 XL 650 L11-62112 $33.95 7mm Rem. Mag. L11-21366 58.95 RL 550B L11-62231 37.95 .30-30 Win. L11-20111 55.95 (Includes modified vacuum manifold.) .300 WSM L11-21029 58.95 RL/Super 1050 L11-62219 224.95 .300 Blackout L11-62140 175.00 (Not pictured, see Page 81.) NOTE: The .300 Blackout Carbide Trim Die MUST be used with a Short Trim RT 1200B Case Trimmers Die Toolhead. RT 1200B Trimmers will continue be sold .308 Win. L11-20106 50.95 while they last. The RT 1200B Case Trim- .308 Win. Carbide L11-62126 175.00 mer Assembly L11-22080 is $267.95. .30-06 L11-20108 50.95 NOTE: The RT 1200B trimmer for the .30-06 Carbide L11-62159 225.00 7.62 x 39 and 6.8 SPC cartridges is not .300 Win. Mag. L11-21370 58.95 compatible with other size/trim dies, .300 Wby. Mag. L11-21371 58.95 and these trim dies are not compatible .303 Brit. L11-21765 58.95 with the RT 1500. 8 x 57 Mauser L11-21502 58.95 RT 1200B Motor L11-22024 $272.95 .338 Win. Mag. L11-21368 58.95 6.8 SPC (trim die) L11-16391 58.95 RT 1500 Motor Only L11-61500 $297.95 7.62 x 39 (die) L11-16390 58.95

MILITARYEliminate the “Grunt Work” with Dillon’sBRASS? Super Swage 600 ntil now, reusing military brass, with its crimped Uprimer pockets, has been a tedious task. The Dil- lon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won’t be tearing the rims off L11-20095 the brass. A tool steel, hardened swage rod (easy to $100.95 change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What’s more, it’s inexpensive. The Super Swage 600 comes with large and small swage rods. 6.8 SPC Back-Up Rod L11-62124 $20.95 9mm Adaptor L11-62168 14.95 .40 S&W Adaptor L11-62169 14.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 24 Dillon Leather by Mitch Rosen!

When we lost our supplier for Dillon Leather, we considered abandoning the gunleather business. Fortunately, we were able to team up with Mitch Rosen Extraordinary Gunleather to continue to offer a best-quality, made-in-the-USA line of belts and holsters. We know you’ll like these products – we’re happy to have our name on them.

GLOCK 19, 23, 32 L11-18814 GLOCK 26, 27, 33 L11-18815 GLOCK 20, 21 L11-18816 Makarov L11-18819 SIG P220, P226 L11-18818 5JR-DL $75 SIG P228, P229 L11-18827 full-length belt slide that offers all-day comfort S&W Military & Police 9mm/.40 Auto L11-19011 Aand superior concealment for an outside-the- S&W Military & Police .45 Auto L11-19012 pants belt holster. S&W Military & Police SHIELD™ L11-12241 Beretta 92 L11-18817 S&W 2” J-Frame Revolver L11-18820 Colt Government Model L11-18810 Springfield Armory XD 4” L11-18825 Colt Commander L11-18811 Springfield Armory XD 5” L11-18874 Colt Officers L11-18812 Springfield Armory XD-S L11-12236 GLOCK 17, 22, 31 L11-18813 Ruger 2.25” SP-101 Revolver L11-18828

MBS-DL $50 5DM-DL $50 SOS-DL $55 ingle mag pouch with snap- ouble mag pouch with two ne magazine, one tactical Son/snap-off belt loop. Dbelt loops. Olight (fits 6P-size lights). 1911 L11-18847 1911 L11-18851 1911 L11-18855 Beretta L11-18848 Beretta L11-18852 Beretta L11-18856 GLOCK 17, 22, etc. L11-18849 GLOCK 17, 22, etc. L11-18853 GLOCK 17, 22, etc. L11-18857 GLOCK 20, 21, etc. L11-18850 GLOCK 20, 21, etc. L11-18854 GLOCK 20, 21, etc. L11-18858

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Dillon Leather by Mitch Rosen! 25

Clipper-DL $65 ur clip-on, inside-the-waistband holster features Oa steel reinforced mouth and a high-quality spring-steel clip. Colt Commander L11-18833 Colt Officers L11-18834 GLOCK 17, 22, 31 L11-18829 GLOCK 19, 23, 32 L11-18830 GLOCK 26, 27, 33 L11-18831 S&W Military & Police 9mm/.40 Compact L11-19013

Sport EXP-DL $98 he Sport™ holster is a straight-drop design featur- Ting a tunnel loop and rear stabilizing slot. This is an all-around holster suited to field use, "practical" competition, and some prefer it for daily carry. Slim profile, straight drop, close to the body. S&W 4” K-Frame Revolver L11-19372 El Raton-DL $50 S&W 4” Lugged Barrel L-Frame Revolver L11-19373 his pocket holster secures and properly positions S&W 4” Light Barrel N-Frame Revolver L11-19374 Ta J-Frame revolver in your pocket. Will not come S&W 4” Lugged Barrel N-Frame Revolver L11-19375 out when you draw. S&W 5” Lugged Barrel N-Frame Revolver L11-19376 2” J-Frame S&W Revolver L11-18843

Best-Quality Belt-DL $70 imply the best GUN BELT you have ever owned. Full, dou- Sble-thickness leather with solid brass buckle and hardware. 1.5” Gun Belt 1.25” Gun Belt 32” Waist L11-18859 32” Waist L11-18873 34” Waist L11-18860 34” Waist L11-18867 36” Waist L11-18861 36” Waist L11-18868 38” Waist L11-18862 38” Waist L11-18869 40” Waist L11-18863 40” Waist L11-18870 42” Waist L11-18864 42” Waist L11-18871 44” Waist L11-18865 44” Waist L11-18872

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 26 Packin’Packin’ Dillon’sDillon’s WayWay $4500 L11-18193

illon’s Concealed Carry Tote accommodates all the tools Dyou need to survive the urban jungle! illon’s “Plan B” Day Planner Holster holds a handgun This low-profile carry case looks like a mild-mannered- Dand a spare magazine or pepper spray, yet it fits in with computer-nerd accessory, but it’s designed for your pistol as business clothing and won’t draw undue attention. It looks well as your PC! Made of rugged fabric, with heavy duty like a typical day planner, but inside there’s a holster that’s zippers on all three main compartments – one designed to adaptable for either right- or left-hand draw. It fits most hold a laptop or tablet, one for folders and paperwork, and .380, 9mm, .40 and .45 caliber autos, including: Beretta, one in the middle for a handgun. Colt, GLOCK, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, and Inside the case are pockets and pouches that will hold Smith & Wesson. Will also hold small-frame revolvers with spare magazines as well as folding knives, letter openers, two- to four-inch barrels. flashlights, smart phones, full-sized 8.5” x 11” paper note “Plan B” Day Planner L11-10252 $24.95 pads, etc. Measures 13.5” x 11.5” x 6.5” deep. Mernickle $7995 Holsters’ Conceal-Carry Performance Series f Cowboy Action Shooting is your Igame, why not CARRY the gun you shoot the most? These holsters can be worn strong side, appendix carry or cross draw and are fully molded. Now also available for J-Frame S&Ws. 4-3/4” SA Colts/clones L11-11560 4-5/8” Ruger Blackhawk L11-15765 Ruger LCR L11-29030 2” J-Frame S&W Rev. L11-15764 “Wild Bunch” 1911 Holster & Mag Pouch his holster/mag pouch was designed in away from your body so you’ll get a full Ta joint effort by World Cowboy Action combat grip, and the holster includes the Shooting Champion Gene “Evil Roy” T-nut lock system to ensure that it stays Pearcey and World Fast Draw Champion in place during a draw. Bob Mernickle when SASS introduced the The mag pouch spaces the maga- “Wild Bunch” category for Cowboy zines so when you grab one mag, the Action Shooting. second isn’t in your way; above the When these two champions put their belt line so the belt doesn’t interfere heads together, they created a holster with the draw; and at the max depth and mag pouch that look like they were required by the sport – and no more – made at the turn of the century, yet fea- so you’ll get a full grip and the ability ture state-of-the-art speed and accuracy. to index with your forefinger for a The holster is hard molded so as not to rapid mag well insert. lose its shape even after thousands of 1911 Holster L11-19947 $139.95 draws. It spaces the pistol’s grip frame Mag Pouch L11-19946 44.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com INTERNATIONAL HANDGUN LEATHER 27 IHLby Ian Martin

IHL Ltd. Class Holster $99.95 Colt Gov’t, Black L11-16456 Colt Gov’t, Brown L11-14348 IHL Solo Mag Pouch $38.95 Colt Com, Black L11-16886 IHL Hammerhead Shark Single Stack, Black L11-16446 Colt Ofcr’s, Black L11-16887 Single Stack, Brown L11-13145 GLOCK 17, Black L11-16891 1911Slide L11-19230 $122.95 Double Stack, Blk. L11-16447 GLOCK 19, Black L11-16890 1911Pouch L11-19231 81.95

IHL Speed Strip Wallet .38/.357 6-rd. L11-18308 $28.50 IHL Prosecutor Holster $92.95 .38/.357 8-rd. L11-18987 $28.50 Ruger Alaskan (Pictured) L11-15038 IHL Belt Slide $51.95 .44/.45 6-rd. L11-18988 $28.50 S&W Governor .410/.45, 2.75” bbl. L11-15041 Colt Gov’t, Black L11-16468 .410 Ga. 6-rd. L11-18990 $32.50 S&W .500 Mag., 4” bbl. L11-15039 Sm. GLOCK, Black L11-16469 .500 S&W 6-rd. L11-18989 $28.50 Taurus Judge 2.5”.410, 2” bbl. L11-15040 THE WILDERNESS TACTICAL PRODUCTS order to better support holsters, magazine pouches and other gear. This belt is a favorite with law enforcement, military personnel, firefighters, paramedics, etc. Note: The 1.75” belt works best with BDUs or jeans. The 1.5“ belt features a scaled-down buckle. Measured Waist 1.5” Belt 1.75” Belt The 32” Waist L11-10965 L11-10253 $39.95 Wilderness’ Original 34” Waist L11-10966 L11-10128 39.95 Instructor Belt is an incredibly strong belt with a specially 36” Waist L11-10967 L11-10129 39.95 designed “V” ring buckle. Imitation is the sincerest form 38” Waist L11-10968 L11-10130 39.95 of flattery, and the marketplace is full of copies of this 40” Waist L11-10969 L11-10131 39.95 belt, but none can compare to the original. 42” Waist L11-10970 L11-10132 39.95 We’re selling the five-stitch version, which has extra 44” Waist L11-10971 L11-10133 44.95 stitch lines to make the belt more rigid vertically in 46” Waist L11-10972 L11-10889 44.95 MAXPEDITION HARD-USE GEAR

B. C. A./B. Rollypoly Folding Dump Pouch L11-19999 $25.99 (A.)Open: 6” Diameter 8” Tall (B.)Folded: 3”x 3”x 1.75” C. Spartan Wallet, Foliage Green (folded) L11-19993 19.99 A. D. Spartan Wallet, Black (open) L11-19992 19.99 D. Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 28

“Revolution” Holster Series Blade-Tech used its extensive knowledge of Kydex© holstermaking to bring you the Revolution line of holsters. Using a proprietary blend of polymers, Blade- Tech has engineered these holsters to offer lifetime performance in a wide range of conditions. The holsters won’t become soft in extreme temperatures (over 300º F) and won’t become fragile in low temperatures. Colt 1911 L11-40011 $29.99 GLOCK 17/22 L11-40012 29.99 GLOCK 19/23 L11-40013 29.99 GLOCK 20/21 L11-40069 29.99 GLOCK 34/35 L11-40068 29.99 Smith & Wesson 4” M&P L11-40067 29.99 Springfield 4” XD 9/40 L11-40071 29.99 Springfield 5” XD 9/40 L11-40070 29.99

BLADETECH Ambi Eclipse™ Straight-Drop Holster 1911 L11-40117 $79.99 BLADETECH 1.5” Inner/Outer Hook & Loop Belt GLOCK 17 L11-40118 79.99 32” L11-12242 $59.99 GLOCK 19 L11-40119 79.99 34” L11-12243 59.99 GLOCK 26 L11-40120 79.99 36” L11-12245 59.99 GLOCK 34 L11-40121 79.99 38” L11-12246 59.99 GLOCK 42 L11-40126 79.99 40” L11-12247 59.99 S&W M&P 4.5” 9/40 L11-40123 79.99 42” L11-12249 59.99 Springfield XD 4” 9/40 L11-40122 79.99 44” L11-12251 59.99 Springfield XDM 4.5” 9/40 L11-40124 79.99 46” L11-12253 59.99 Springfield XDM 5.25” 9/40 L11-40125 79.99 48” L11-12255 59.99

Single Mag $19.99 ea. Double Mag $26.99 ea. 1911 L11-40018 1911 L11-40022 Quad Mag $39.99 ea. Sm. GLOCK L11-40019 Sm. GLOCK L11-40023 1911 L11-40026 AR-15 Single Tek-Loc™ AR-15 Double Tek-Loc™ Lg. GLOCK L11-40020 Lg. GLOCK L11-40024 Sm. GLOCK L11-40027 Mag Pouch Mag Pouch B92/XD/CZ etc. L11-40021 B92/XD/CZ etc. L11-40025 B92/XD/CZ etc. L11-40028 L11-40034 $29.99 L11-40033 $39.99

Blade-Tech Holster/Mag Pouch Hardware (left to right) Large Tek-Loc™ Universal Belt Clip with Hardware L11-40029 $8.95 Tek-Loc™ Dropped Offset Holster Attachment L11-40016 19.99 Dropped Offset Holster Belt Loop Attachment L11-40017 19.99 Mini Tactical Modular Mount System with Hardware L11-39920 24.99 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com SAFARILANDHolsters29 5” N-Frame S&W Revolvers L11-19264 43.95 Beretta Compact, Taurus Compact, CZ-75, Colt Commander Model L11-19265 43.95 Beretta, Taurus, Browning HP, Colt 1911 L11-19266 43.95 Colt Officers’ Model, GLOCK 19/23, SIG P228, HK USP Compact 9/40 L11-19267 43.95 GLOCK 17, 20, 21, 22, HK USP 9/40, Ruger P Series, SIG P220 L11-19268 43.95 Safariland Model 6377 ALS™ Holsters The Model 6377 is a concealment version of the all new Automatic Locking Safariland Safariland System series holster. Once the weapon is holstered, it locks into place, provid- Custom Fit Model ing an extra measure of security from the standard open-top holster. 567 6377 Colt 1911 L11-40072 $39.95 ALS™ GLOCK 17/22 L11-19444 39.95 GLOCK 20/21 L11-19443 39.95 GLOCK 34/35 L11-40073 39.95 SIG 220/226 L11-19446 39.95 SIG 220/226 with Accessory Rail (no light) L11-19447 39.95 SIG 228 L11-19445 39.95 Safariland Custom Fit 567 Holsters S&W M&P 9/40 L11-19448 39.95 The Model 567 Custom Fit holster is one of the lightest, thinnest, best fitting Springfield 4” XD 9/40 L11-40074 39.95 concealment holsters available. True to its name, it adjusts to a wide variety of Springfield 5” XD 9/40 L11-40075 39.95 popular handguns, giving each a “custom fit” in this holster. Springfield XDM 9mm L11-40076 39.95 4” K & L-Frame S&W, Ruger, and Colt Rev. L11-19262 $43.95 Springfield XDM .40 L11-40077 39.95 4” N-Frame S&W Revolvers L11-19263 43.95 Close & Ready Bedside Holster Caddy he key to the suc- Tcessful gunfighters of the Old West was not so much the weapon of choice, but rather the holster. How quickly the weapon could be retrieved, aimed and Holster NOT Included Safariland fired was the differ- Model 5188 ence between survival and becoming a statistic. The Close & Ready Holster Caddy provides a faster and safer way to protect your family. It works with most Safariland Model 5188 Open Top Concealment Paddle Holster This is a compact and lightweight concealment paddle holster that features existing holsters and slides easily between the mat- an injection molded paddle design offering a comfortable, close to the body fit. tress and box springs on either side of your bed. IDPA approved, and with a tough STx finish. Springfield 1911 w/Picatinny Rail L11-19451 $39.95 L11-18046 $29.95 Comp-Tac: Holsters Dedicated to Your Victory

Comp-Tac International Comp-Tac Infidel Ultra The International features a modular mounting system that offers the versa- An inside-the-waistband holster combining the wearability of the Comp-Tac tility of different mounting options, combining a belt holster, belt drop offset Minotaur MTAC with the simplicity and convenience of The Infidel. Ideal for holster, paddle holster and paddle drop offset holster into one. the individual who needs to safely take his or her weapon off and on through- GLOCK 17/22 L11-40110 $69.00 out the course of the day. GLOCK 34/35 L11-40109 69.00 Colt 5” 1911 L11-40102 $90.00 S&W M&P 9/40 L11-40111 69.00 GLOCK 17/22 L11-40103 90.00 S&W M&P Pro L11-40112 69.00 GLOCK 19/23 L11-40104 90.00 Springfield XD Tactical 9mm L11-40116 69.00 S&W Shield L11-40105 90.00 Springfield XDM 4.5 9/40 L11-40115 69.00 S&W M&P 9/40 L11-40106 90.00 Springfield XDM 5.25 9mm L11-40113 69.00 Springfield XD-S L11-40107 90.00 Springfield XDM 5.25 .40 L11-40114 69.00 Springfield XDM 4.5 9/40 L11-40108 90.00 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 30 SUPER 1050 STANDARD FEATURES: • Automatic Indexing • Commercial Grade Machine • Swages Military Primer Pockets • Loading Rate: 1000-1200 Rds/Hr • Includes One Caliber Conversion • Factory Adjusted Reloading Dies • Automatic Powder Measure • Automatic Primer System • Automatic Casefeeder • RISK FREE 30-Day Trial Period! $173995* *Prices vary on exotic-caliber machines. SUPER 1050 Stock Numbers Super 1050 DVD .223 Remington L11-21130 .223 Rem./Carbide (*$1813.95) L11-21131 Instruction Manual .22-250 Remington L11-21129 L11-19485 $19.95 .243 Winchester L11-21126 .270 Winchester L11-18491 6.8 SPC (*$1789.95) L11-21150 (6.8 SPC comes with lg. and sm. primer systems)

.30 M1 Carbine (*$1754.95) L11-21142 .300 WSM (*$1804.95) L11-21110 .30-30 Winchester L11-21003 7.62x39 (*$1789.95) L11-21144 (7.62x39 comes with lg. and sm. primer systems) .303 British L11-21060 .308 Winchester L11-21058 .308 Win./Carbide (*$1821.95) L11-21068 .30-06 Springfield (*$1804.95) L11-21059 .30-06 Sp./Carbide (*$1954.95) L11-62178 .45-70 Gov’t (*$1849.95) L11-21064 .32 S&W L11-21134 .380 ACP L11-21135 9mm Parabellum L11-21067 .38 Special L11-21136 .357 Magnum L11-21137 .357 SIG (*$1769.95) L11-21127 .38 Super L11-21132 .38 Super Comp L11-21069 .38-40 Winchester L11-21158 .40 S&W L11-21070 10mm L11-21138 .41 Magnum L11-21139 .44 Special L11-21140 .44 Magnum L11-21141 Total price as pictured here with .44-40 Winchester L11-21159 optional accessories: $1892.80 .45 ACP L11-21061 Powdercheck System L11-21044 $68.95 .45 Colt L11-21133 Low Powder Sensor L11-16306 $41.95 .45 GAP L11-21002 Aluminum Bullet Tray L11-22215 $41.95 .500 S&W (*$1804.95) L11-20428 1050 Accessories 31 A(1). qUICk-CHANgE D. PRIMER PICkUP TUBES TOOLHEAD CONvER- A(1). Used to transfer primers E. SION from flip tray to priming Includes: system. •Toolhead 1 Lg. tube L11-22029 $7.99 •Powder Measure 1 Sm. tube L11-22028 7.99 2 Sm., 2 Lg. L11-20056 23.95 L11-21393, $270.95 4 Lg. tubes L11-20050 23.95 4 Sm. tubes L11-20049 23.95 A(2). CALIBER CONvER- D. SION E. PRIMER FLIP TRAy Includes: A heavy, high-quality tray large enough for the •Shellplate Federal primer package. L11-13606, $20.95 •Locator Buttons •Swage Backup Rod/ Ex- F. 1050 MACHINE COvER A(2). F. pander This great looking nylon cover •Casefeed Adapter adds security to your loading •Casefeed Plunger bench. Comes equipped with a •Powder Funnel D-ring, allowing the heavy-duty zipper to be locked. .32 S&W L11-20634 $122.95 G. .32 ACP L11-20633 122.95 Cover, .380 Auto L11-20483 122.95 9mm L11-20482 122.95 L11-13239, $39.95 .38 Super L11-20484 122.95 (G.)Master lock, .38 Super Comp L11-21057 122.95 L11-13083, $3.95 .38/.357 Magnum L11-20477 122.95 .357 SIG L11-20068 122.95 H. RL 1050 BULLET TRAy .40 S&W L11-20545 122.95 Designed for “economy 10mm L11-20788 122.95 H. .41 Magnum L11-20478 122.95 of motion” when load- .44 Magnum L11-20479 122.95 ing. Our new bullet tray .44-40 Winchester L11-21161 122.95 is made of durable cast .45 ACP L11-20480 122.95 aluminum and is Dillon .45 Colt L11-20481 122.95 .45 GAP L11-21010 122.95 Blue powder coated. .475 Linebaugh/.480 Ruger L11-20833 159.95 .500 S&W Magnum L11-20834 159.95 L11-22215, $41.95 .223 Remington L11-20485 122.95 .22-250 L11-21055 140.95 I. SPARE PARTS kIT .243 Winchester L11-21054 140.95 1 Super 1050 Spring Bushing .270 Winchester L11-21053 140.95 1 Cam Guide Bolt 1/4-20 .30 Carbine L11-20626 140.95 1 Super 1050 Toolhead Spring 7.62x39 L11-20631 159.95 1 Priming Station Retaining Tab .300 WSM L11-20466 159.95 1 Ratchet Restriction Tab .303 British L11-21051 122.95 4 Lock Ring Inserts .308 Winchester L11-21049 140.95 3 Pistol Decapping Pins .30-06 Springfield L11-21050 202.95 2 #10 Tinnerman Inserts .30-30 Winchester L11-21052 140.95 1 1/4” E-Clip 2 Pickup Tube Tips, Large (Green) .45-70 Government L11-21056 173.95 3 Bellcrank Cubes 2 Magazine Orifices, Small (Blue) 2 Primer Punch Springs A(3). 1050 PRIMER SySTEM 2 Retaining Clips 2 1/4-20 3/8 BH Screws 1 Slide Roll Pin Sleeve Large primer system conversion L11-20476 $106.95 4 Locator Pins (#1, #2, #3, #4) 2 Dispensing Tips, Small 1 Tab/Spring Arm Spring 2 Dispensing Tips, Large Small primer system conversion L11-20419 106.95 2 Pickup Tube Tips, Small (Yellow) A(4). ExTRA CASEFEED PLATE 2 Magazine Orifices, Large (Red) L11-20779, $32.95 Large pistol L11-21072 $38.95 J. MACHINE MAINTENANCE kIT Large rifle L11-21075 38.95 Small rifle L11-21074 38.95 Everything you need to Small pistol L11-21073 38.95 keep your Dillon loader 1050 POWDER MEASURE L11-20421 $81.95 cleaned and lubricated up 1050 TOOLHEAD L11-20420 $198.95 to factory specifications. Available in combination B. B. 1050 TOOLHEAD with a spare parts kit for STAND your machine. Black L11-62201, $49.95 Blue L11-62200, $49.95 Maint. Kit & 1050 Spare Parts Kit L11-97018, $46.95 K. k. 1” BENCH WRENCH L11-10842, $7.95 each. C. 1050 TOOLHOLDER Two or more, $7.10 each. Ensures that the tools you L. need are handy and organ- L. BUSHINg DRIvER ized! Wrenches included. L11-20341, $12.95 ea. With bracket L11-62202, $33.95 W/O bracket L11-62203, $29.95 1050 Ball End Dipped Wrench Set M. MOUNTINg HARDWARE kIT L11-62161, $17.95 Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4 C. Flat Washers, 4-Fender Washers, 2-Wood Screws. L11-14355, $5.49 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 32 DillonDillon RangeRange BagBag

illon’s New DRange Bag is de- signed to hold the Stage Bag (inset, top left) or a Border Shift Ammo Bag (sold separately below), as well as a Dillon Large Utility Box (see Page 64). The Main Compartment is 12.5” long x 7” wide x 10” high, the End Pockets are 8.5” tall x 6.5” wide x 2” deep and the Front Pocket is 9” tall x 6” wide x 2” deep. Range Bag, Black L11-19366 $89.95 Stage Bag L11-19259 29.95 Pistol Pouch, Black L11-17027 10.95 ‘Border Shift’ Ammo Bag illon’s two-compartment ammo bag is constructed Dwith a flexible inner liner that will allow the entire volume to be accessible from either zippered opening. You’ll never again mix fired brass with loaded rounds! I.D. Card Holder L11-14575 $2.95

Black Ammo Bag L11-13755 $25.95 DillonDillon PistolPistol CasesCases rotect your handguns with accommodate most “Limited” PDillon’s rugged, padded pis- class autos and the “Large” case tol cases. These cases feature a will accept pistols with scopes pouch on one side for cleaning and extended compensators. gear or other accessories and Small – 7.5”x 11.5” magazine/ speedloader L11-10161 $18.95 pouches on the other. Large – 9.5”x12.5” The “Small” Dillon L11-10162 21.95 Pistol Case will 101 Classic Firearms by John Marshall33 illon Precision announces the release of some of the world’s most important firearms. DJohn Marshall’s new book 101 Classic About the Author: John Marshall is an Firearms: A Chronological Foray into the accomplished photogra- golden years of pher and freelance Firearms Develop- writer whose articles ment, a compilation of have appeared in The the author’s popular Blue Press, Gun articles appearing Digest, Guns & Ammo’s in The Blue Press since Handguns, and Ameri- 2007. can Gunsmith. An 101 Classic expert on firearms, he is Firearms is sure to be a also a member of the welcome and prized Remington Society of addition to the library America, the Smith & of any serious firearms Wesson Collectors Asso- aficionado. ciation, the Smith & Published by Dillon Wesson Historical Foun- Precision, and printed dation and the Ameri- and bound in the can Gunsmithing USA, 101 Classic Association. He is Firearms is a high- also an endow- quality full color ment member of 11.5” x 9” hardcover with the National Rifle 224 pages packed full of insights and history on Association. Price: L11-40133 $29.95, Autographed L11-97130 $34.95 Arredondo Multi-Function Squib Rod Barrel-Lite® L11-10529 $4.95 Scope Windage Adjustment Tool

Magazine Base Pad Tool/ Scope Battery Cap Remover

his is a MUST-HAVE range-bag accesso- Try. It’s a squib rod (for removing stuck bullets), magazine base removal tool, and scope windage adjustment and battery cap removal tool. L11-15250 $12.95

he Otis Technology, Inc. Breech-to- TMuzzle Cleaning System cleans rifles .22 to .50 cal., shotguns .410 bore to 10 gauge and pistols .22 to .45 cal. The system includes three memory-flex rods, three forged brass tips, two obstruction removers, a T-handle, 0.5 ounce solvent, all-caliber patches, a shotgun brush adapter, two patch savers, five bore brushes, a bore rredondo Accessories’ Magazine-Cleaning reflector and a cleaning guide. Lifetime ABrush is ideal for that little job we all dread warranty! (avoid?)! No excuse, Sir! L11-18174 $39.95 L11-19257 $11.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 34Dillon’s Pistol Die Sets Unique Hex Adjustments Quick-Release Floating for Wrench Die Inserts Size Die Decap • Floating Decap Assembly Eliminates Assy. Primer “Draw Back” • Long, Tapered Carbide Ring • Radiused Opening Makes Progressive Long, Vented Loading Smoother Tapered Seating Carbide Stem Seat Die Ring • Reversible Seating Stem Makes it Easy to Change Bullet Styles Tighter Heavy, Large, ACCU- Crimp Die Radiused Headed Radiused CRIMP • Quick Disassembly, Easy to Clean Carbide Decap Pin Mouths Die Sizing/Depriming Die .38 Super L11-14399 $64.95 Our sizing/depriming dies feature a unique “floating .38 Special/.357 Magnum L11-14400 64.95 decap assembly” with a snap spring that throws the spent 10mm/.40 S&W L11-14398 64.95 primer off the pin and eliminates the problem of primer .41 Magnum L11-14402 64.95 “draw back” that often occurs when decapping military .44 Special/.44 Magnum L11-14403 64.95 brass. The primary feature of Dillon’s size die design – the .45 ACP/.45 GAP L11-14404 64.95 long, tapered carbide ring with a radiused opening – .45 Colt L11-14405 64.95 remains unchanged. Dillon Carbide Size/Deprime Dies That radiused opening, and its importance to progressive .32 S&W/.32 H&R Magnum L11-14119 $33.45 reloading, is one of the reasons why our seat and crimp dies .380 ACP L11-14410 27.45 are better. We found a way of manufacturing these dies that 9mm Parabellum L11-14415 27.45 has enabled us to make the lead-in radius even bigger! The 9x25 Dillon L11-14602 104.95 bigger radius makes progressive loading with our equipment .357 SIG L11-16513 104.95 even smoother – but that’s still only a part of the story. .38 Super L11-14408 27.45 Bullet Seating Die .38 Special/.357 Magnum L11-14409 27.45 Our new quick-disassembly seat die allows the user to 10mm/.40 S&W L11-14407 27.45 disassemble and clean the seat die without losing adjustment. .41 Magnum L11-14411 27.45 In this manner, bullet lube and shavings can be quickly .44 Special/.44 Magnum L11-14412 27.45 removed from the die, thereby guaranteeing a constant seat- .45 ACP/.45 GAP L11-14413 27.45 ing depth. We’ve incorporated a “flip-flop” seating stem and a .45 Colt L11-14414 27.45 clip that enables you to remove the die insert and change the Dillon Seating Dies seating stem from round nose to semi-wadcutter without .32 S&W/.32 H&R Magnum L11-14106 $25.45 unscrewing a seating stem out of the die body. We’ve always .380 ACP L11-14419 25.45 included both types of seating stems, but the new double- 9mm Parabellum L11-14424 25.45 ended design makes it a simple matter to remove a pin, 9x25 Dillon L11-14603 28.45 reverse the seating stem, make any minor seating depth .357 SIG L11-16515 28.45 adjustments that may be necessary and go on loading in a fraction of the time it used to take. .38 Super L11-14417 25.45 .38 Special/.357 Magnum L11-14418 25.45 Crimp Die 10mm/.40 S&W L11-14416 25.45 We’ve made it easy for you to remove the die insert for .41 Magnum L11-14420 25.45 cleaning without having to change the critical crimp adjust- .44 Special/.44 Magnum L11-14421 25.45 ment. Once your crimp die is set for the proper amount of .45 ACP/.45 GAP L11-14422 25.45 crimp, you’ll never have to change it. This is especially good .45 Colt L11-14423 25.45 news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in Dillon Crimp Dies order to remove any bullet lube or lead residue. Then, you .32 S&W/.32 H&R Magnum L11-14107 $24.45 had to start from square one to re-adjust the crimp. Those .380 ACP L11-14438 24.45 days are over. All you have to do now is pop a clip and the 9mm Parabellum L11-14443 24.45 die insert drops into your hand for cleaning. 9x25 Dillon L11-14604 27.45 .357 SIG L11-16514 27.45 NOTE: All Dillon Pistol Die sets include our sizer/ decap die, .38 Super L11-14436 24.45 seat die and a separate crimp die. (Taper crimp for autos; accu- .38 Special/.357 Magnum L11-14437 24.45 crimp for revolvers.) 10mm/.40 S&W L11-14435 24.45 .41 Magnum L11-14439 24.45 Dillon Pistol Dies (Three-Die Sets) .44 Special/.44 Magnum L11-14440 24.45 .32 S&W/.32 H&R Magnum L11-14426 $64.95 .45 ACP/.45 GAP L11-14441 24.45 .380 ACP L11-14401 64.95 .45 Colt L11-14442 24.45 9mm Parabellum L11-14406 64.95 9x25 Dillon L11-14601 137.95 Spare Decapping Pins .357 SIG L11-22083 137.95 Package of 10 L11-21528 $5.75 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Dillon’s Rifle Die Sets 35 Stuck Case Hex Adjustments Remover for Wrench Precise, Uniform Size Die Taper Crimp • Full-length, to minimum tolerance Size Die Carbide Polished • Carbide expander ball Expander to a High • Features stuck case remover Ball Micro-Finish Seat Die • Designed to hold bullet straight Solid, throughout the seating process 1-Piece Decapping Pin Taper Crimp Die Standard • Centers case neck and body for 7/8 x 14 Radiused Threads Mouth a more uniform crimp

Dillon Three-Die Rifle Die Sets include a sizing/ Dillon Rifle Dies (Three-Die Sets) depriming die, a bullet seating die and a taper crimp .223 Remington L11-10839 $67.95 die. Dillon Two-Die Rifle Die Sets include a .308 Winchester L11-15574 67.95 sizing/depriming die and a seat/crimp die. .30-06 Springfield L11-10840 67.95 Sizing/Depriming Die Dillon Carbide Rifle Dies (Three-Die Sets) The sizing/depriming die is full-length, to mini- .223 Remington L11-10096 $163.95 mum tolerances, sizing cases down to function in semi- and full-automatic firearms. We strongly sug- .30 M1 Carbine L11-62128 104.95 gest that a headspace case gage be used to correctly .308 Winchester L11-10793 169.95 adjust the size die. .30-06 Springfield L11-62151 275.95 For high volume users, such as commercial Except where noted, die sets include three dies: reloaders, law enforcement agencies, and high carbide size/decap, a seater and a separate crimp power or service rifle competitors, we also offer .223 die. PLEASE NOTE: Carbide rifle dies still require and .308 die sets with a full-length carbide sizing case lubrication! die. Lubrication is still required, but the increased Dillon Size Dies scratch resistance and die longevity of carbide are of .223 Remington L11-12778 $41.95 great benefit to these groups of users. .223 Remington (Carbide) L11-10223 136.95 The depriming assembly includes a carbide .30 M1 Carbine (Carbide) L11-97039 72.95 expander ball for “squeak-free,” effortless neck .308 Winchester L11-10242 41.95 expansion. This expander ball is located in the mid- dle of the depriming stem to take advantage of supe- .308 Winchester (Carbide) L11-10234 149.95 rior initial leverage for easier extraction. .30-06 Springfield L11-12238 41.95 In the event of a stuck case, the design of the .30-06 Springfield (Carbide) L11-62150 224.95 depriming assembly allows it to function as a stuck Universal Decapping Die L11-22127 $26.95 case remover. Dillon Seat Dies Bullet Seating Die .223 Remington L11-21672 $29.95 Our bullet seating die is internally designed to keep .308 Winchester L11-21674 29.95 the bullet straight throughout the seating process. .30-06 Springfield L11-21673 29.95 Once properly adjusted, the only measurable runout Dillon Taper Crimp Dies will be that which is inherent in the bullet. .223 Remington L11-21676 $27.55 Taper Crimp Die .308 Winchester L11-21678 27.55 The taper crimp die is also specially configured to .30-06 Springfield L11-21677 28.55 center both the case neck and the case body, thereby Spare Decapping Pins aligning the entire cartridge for a more uniform .223 Remington L11-13278 $3.99 crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and preci- .308 Winchester L11-13132 3.99 sion demanded by today’s marksman. .30-06 Springfield L11-13069 3.99 A taper crimp die is preferred for loading ammu- For Universal Decapping Die L11-15816 3.99 nition intended to be used in semiautomatic firearms Spare Dillon Die Lock Rings (Fit all 7/8” x 14 thread dies) with detachable box magazines, and in lever-action Dillon Die Lock Ring L11-14067 $1.35 firearms with tubular magazines. 5-Pack Die Lock Rings L11-10669 4.15 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 36 Dillon’sDillon’s 550...550... PrettyPretty MuchMuch AnyAny WayWay YouYou WantWant ItIt

BL 550 See Page 13 Dillon’sDillon’s 550...550... PrettyPretty MuchMuch AnyAny WayWay YouYou WantWant ItIt 37

RL 550B With Accessory Casefeeder See Page 17 38Dillon’sDillon’s SLSL 900900 Shotshell Loader STANDARD FEATURES: • Automatic Indexing • Auto Powder/Priming Systems • Adjustable Case-Activated Shot System • Factory Adjusted to Load AA Hulls • Factory Adjusted Loading Dies • The Original Tilt-Out Wad Guide • Lifetime “No-B.S.” Warranty • RISK FREE 30-Day Trial Period! All for ONLY... $92995 $1159.90 with Casefeeder 12 Gauge L11-97110 20 Gauge L11-97123 28 Gauge L11-97124 Comes with factory adjusted dies

A. SL 900 CONvERSIONS Total price as pictured here with optional accessories: $1247.80 12 gauge Casefeeder (pictured) L11-97037 $229.95 12 Gauge Conversion 20/28 gauge Casefeeder L11-97036 $229.95 L11-20009, $359.95 12 ga. Euro. 220v Casefeeder L11-97118 $239.95 12 Gauge Casefeed Plate 20/28 ga. Euro. 220v Casefeeder L11-97125 $239.95 (not pictured) Aluminum Roller Handle L11-17950 $45.95 Low Powder Sensor L11-16306 $41.95 L11-17811, $42.95 20 Gauge Conversion D. PACkAgE DEAL L11-22138, $359.95 Includes: Lyman Reloading 28 Gauge Conversion Handbook, Clear Safety L11-22139, $359.95 Glasses, Dial Caliper, Elimi- 20/28 Gauge Casefeed Plate nator Scale, Machine Cover, (not pictured) and Low Powder Sensor. L11-97045, $42.95 L11-22290, $199.95 SL 900 Powder System L11-17817, $76.95 E. SPARE PARTS kIT 1 Pawl Spring 1 20 Gauge Yellow Wad Guide 1 Ejector Wire 1 28 Gauge Green Wad Guide 1 Plastic Wad Guide 1 20 Gauge Locator Pin 1 Swing Arm Torsion Spring 1 Index Pawl 1 Primer Transfer Arm B. SL 900 MACHINE COvER 1 Ring Indexer 1 12 Gauge Locator Pin B. This heavy-duty nylon cover 1 Index Spring Revision A 1 Gum Rubber Insert Revision B comes equipped with a D-ring, 1 Hair Pin Cotter 1 Shot Fitting E-Clip 2 Bellcrank Cubes 1 Failsafe Bushing Revision B allowing the zipper to be locked. 1 Case Insert Slide Spring L11-13239, $39.95 L11-11154, $26.95 F. WINCHESTER SHOTSHELL WADS C. (C.) Master lock L11-13083, $3.95 WT12, 12ga, Orange 500 L11-15515 $11.95 WAA12, 12ga, White 250 L11-15516 8.95 WAA12SL, 12ga, Pink 250 L11-15517 8.95 WAA20, 20ga, White 250 L11-15518 8.95 WAA28, 28ga, Red 250 L11-15519 8.95 WAA41, .410, Red 250 L11-15520 8.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Comp-Tac’s Trojan Horse Long Gun Case39 he Trojan Horse Long Gun Case is the first of its kind: a Tsafe, comfortable, simple and unobtrusive way to carry your long guns with you. No longer do you need to worry about a casual observer spotting you with a “Gun” case as you transport your long guns to and from your car. Instead all they will see is a person with a sports bag. It measures 36” Long, 4”-15” Wide, 4” Deep and features rigid side panels that provide concealment with no printing; an adjustable, padded shoulder strap with side-release buckle on either end; a heavy duty zipper with tactical speed pull attachment for quick deployment; inside divider with Molle straps; and two inside zippered pockets. Will hold up to 20” long barrel with collapsible stock. Standard Trojan Horse Long Gun Case L11-19388 $75.00 Heavy Rated Trojan Horse Gun Case L11-16229 100.00

DCO SUPER UFF Products 3 Gun Ammo Bags (Set ATHUMB® offers Tof 3) are made of 1000 Denier Cor- models for popular cen- dura® and equipped with dual 550 cord terfire pistols and 10/22 cinch strings for secure closure. The style magazines. Red/Blue bags hold up to 200 loose pis- ST1 is for 9mm and .40 tol/rifle rounds and Black bag holds up caliber Beretta, Brown- to 200 loose shotgun rounds. ing, Ruger, SIGARMS, L11-15773 $19.95 S&W, etc. In addition, the ST1 has interior rails and grooves to accommodate Colt Govern- ment magazines. L11-18607 $7.95 ST2 is for GLOCK and Para-Ordnance magazines. L11-18608 $7.95 ST3 handles virtually all centerfire, single-column magazines. L11-18609 $7.95 ST22 is for Ruger 10/22 rifles. L11-18610 $7.95 STJR is for Ruger, Browning, Colt and High Standard .22 pistols. L11-18611 $7.95 A-ZOOM Ammo Premium Metal Snap-Caps ard-anodized, solid alu- .44-40 Winchester 6 pack L11-10803 19.98 Hminum snap caps with a .45 Colt 6 pack L11-10804 19.98 secret “Dead Cap” insert that .223 Remington 2 pack L11-10810 9.99 .22-250 2 pack L11-10809 9.99 protects your firing pin and .243 Winchester 2 pack L11-10811 9.99 outlasts brass by 20 times. .270 Winchester 2 pack L11-10812 9.99 Quite simply the best snap .30 M1 Carbine 2 pack L11-10813 9.99 caps we’ve ever seen. .30-30 Winchester 2 pack L11-10815 9.99 .303 British 2 pack L11-10816 9.99 .32 Auto 5 pack L11-10923 $16.65 .308 Winchester 2 pack L11-10817 9.99 .380 Auto 5 pack L11-10795 16.65 .30-06 Springfield 2 pack L11-10814 9.99 9mm Luger 5 pack L11-10798 16.65 .45-70 Government 2 pack L11-10818 9.99 .357 SIG 5 pack L11-10794 16.65 6.5x55 Swedish 2 pack L11-10819 9.99 .40 S&W 5 pack L11-10796 16.65 7.62x39 Russian 2 pack L11-10820 9.99 .45 ACP 5 pack L11-10797 16.65 12 Gauge 2 pack L11-10805 9.99 .38 Special 6 pack L11-10801 19.98 20 Gauge 2 pack L11-10806 9.99 .357 Magnum 6 pack L11-10800 19.98 28 Gauge 2 pack L11-10807 9.99 .44 Magnum 6 pack L11-10802 19.98 .410 Bore 2 pack L11-10808 9.99 Saf-T-Trainer Arredondo Accessories’ Multi-Gun Chamber Flags Molded Plastic Dummy/ Training Ammo Sold in packages of five: .45 ACP L11-10062 4.95 .22 LR L11-10086 $4.95 .223 L11-10063 4.95 9mm L11-10087 4.95 7.62x39 L11-10064 4.95 .38/.357 L11-10088 4.95 .308 L11-10065 4.95 .40 S&W L11-10060 4.95 .30-06 L11-10066 4.95 ade of super tough nylon with a melting point of 480 .44 Mag. L11-10061 4.95 20 Ga. L11-10067 7.95 Mdegrees. Kit includes one shotgun chamber flag and one .45 Colt L11-10061 4.95 12 Ga. L11-10068 7.95 for your AR-15. L11-15485 $11.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 40 12 Gauge Shotshell Tactical Strippers

A. B. C. D.

alifornia Competition Works’ Tactical Strippers are (C. & D.) that will accommodate up to a 2-1/4” duty belt. Cavailable in three, four or six-shell versions that allow A. Six-Shell Tactical Stripper L11-18606 $23.95 quick access to your shotgun reloads. Engineered to carry B. Four-Shell Tactical Stripper L11-18605 22.95 up to 3” magnum* shells as well as the longer European C. Three-Shell Aluminum Stripper* L11-19475 34.95 shotshells. All CCW Tactical Strippers are equipped with D. Six-Shell Covered Tactical Stripper L11-19225 33.95 either a belt clip (A. & B.) or a UM84 attachment device *Three-Shell Aluminum Stripper accommodates 2-3/4” shells only. AP Custom USA Shotshell Carriers/Caddies, Mag ID Kits

E.

C. D.

F. A. B.

Custom USA’s Shotshell Caddies are 100-percent AP Custom USA’s Mag ID Kits enable you to color code and APmachined from solid billet aluminum. The 4x4 Shotshell number your P-Mags and pistol magazines. Caddy holds four 2-3/4” 12 Ga. shells in two adjacent slots. The A. QL/8 Shotshell Carrier L11-12220 $99.95 4x4 is designed for loading four shells at once, either strong- or B. QL/4 Shotshell Carrier L11-12219 49.95 weak-handed. The 3x3 Shotshell Caddy holds three 2-3/4” 12 C. 4x4 Shotshell Caddy L11-14343 69.95 Ga. shells in two adjacent slots. The QL/4 Shotshell Carrier is a four-round 12 Ga. “quad- D. 3x3 Shotshell Caddy L11-14344 69.95 load” system consisting of a single QL shell carrier mounted to Replacement Spring Kit L11-12221 14.95 an adjustable billet aluminum backer plate on a Blade-Tech Tek- E. Pistol Mag ID Kit, Black L11-12222 13.95 Lok. The QL/4 backer plate allows the shooter to adjust the angle Pistol Mag ID Kit, Blue L11-12227 13.95 of the QL to his or her liking. The backer plate is also drilled and Pistol Mag ID Kit, Red L11-12229 13.95 tapped to accept Safariland ELS and Blade-Tech MOLLE attach- F. P-Mag ID Kit, Black L11-12230 15.95 ments. The QL/8 Shotshell Carrier is an eight-round 12 Ga. P-Mag ID Kit, Blue L11-12232 15.95 “quad-load” system consisting of a two QL/4 shell carriers. P-Mag ID Kit, Red L11-12233 15.95 TACCOM, LLC Tactical and Competition Accessories ACCOM, LLC’s Duaload Shotshell ACCOM, LLC’s THolder is available in 2-, 4-, or 6- TQuaload Shotshell Shell versions and can be customized to Holder is a serious carry your shotgun ammo in several con- game changer! It’s so figurations. The 2Up version can be ei- radical that they are ther attached to a belt or MOLLE gear, patenting the device. and the 4Up and 6Up versions feature a The Quaload holds the BLADETECH Tek-Lok™ Universal Belt 2 columns of shells next Clip (included) that can be attached at to one another, you various angles. The Duaload allows you can't get any closer than to grab two shotshells aligned in such a having them touch. No manner that it makes it easy to load two other quad load device can do this! This allows for you to control at a time into your shotgun. how the shell come out of the holer and not have to worry about rim 2Up Belt/MOLLE L11-19530 $9.95 overlay…the rims are already overlapped in the correct position! 4Up w/Tek-Lok™ L11-19531 29.95 4Up Quaload Shotshell Holder L11-19543 $39.95 6Up w/Tek-Lok™ L11-19532 34.95 8Up Quaload Shotshell Holder L11-19544 69.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 41 42 Berry’s Manufacturing Preferred Plated Bullets Description Stock # 250 500 1000 .40 Caliber/10 Millimeter Bullets Bullets for the 7.62 x 39 Cartridge 155 gr. FP-DS* L11-17541 35.00 68.00 126.00 123 gr. RN-DS* L11-17210 $42.00 $81.00 $150.00 155 gr. HBRN-DS* L11-17238 36.00 70.00 130.00 .380 Caliber Bullets 165 gr. FP-DS* L11-17232 36.00 70.00 130.00 100 gr. RN-DS* L11-17532 24.00 46.00 85.00 165 gr. HBFP-DS* L11-17271 41.00 79.00 146.00 9 Millimeter Bullets 180 gr. FP-DS* L11-17542 38.00 74.00 137.00 115 gr. RN-DS* L11-17533 25.00 49.00 90.00 180 gr. RS-DS* L11-17515 35.30 68.26 127.00 115 gr. HBRN-TP* L11-17178 27.00 52.00 96.00 .45 Caliber Bullets 124 gr. RN-DS* L11-17534 27.00 51.00 95.00 185 gr. HBRN-DS* L11-17543 41.00 78.00 145.00 124 gr. HBRN-TP* L11-17272 30.00 57.00 106.00 185 gr. FP-DS* L11-17516 35.30 68.26 127.00 124 gr. HBFP-TP* L11-17385 30.00 57.00 106.00 200 gr. FP-DS* L11-17537 41.00 78.00 145.00 147 gr. RN-DS* L11-17535 31.00 60.00 110.00 200 gr. HBFP-DS* L11-17517 45.00 78.00 146.00 .357 Caliber Bullets 230 gr. RN-DS* L11-17549 42.00 80.00 149.00 125 gr. FP-DS* L11-17536 28.00 53.00 98.00 Description Stock # 200 400 800 158 gr. RN-DS* L11-17540 33.00 63.00 117.00 .44 Caliber Bullets 158 gr. FP-DS* L11-17539 33.00 64.00 118.00 240 gr. FP-DS* L11-17545 39.00 76.00 140.00 *DS = Double Struck, TP = Thick Plate, HB = Hollow Base, RN = Round Nose, FP = Flat Point, SWC = Semi Wadcutter, WC = Wadcutter Sierra Starline Brass Rifle Bullets Unprimed brass sold in packages of 100 (This is not LOADED ammunition.) (This is not LOADED ammunition.) 5.56mm/.224 Caliber Description Stock # 1 Pkg. 5 Pkg. 10 Pkg. 52 gr. HPBT MatchKing 100/box L11-10178 $25.95 .32 H&R Magnum L11-30258 $19.00 $88.00 $168.00 55 gr. BlitzKing 100/box L11-14458 28.95 .32-20 Winchester L11-31282 25.00 116.00 224.00 69 gr. HPBT MatchKing 100/box L11-13007 27.95 9mm L11-31277 17.00 79.00 152.00 (Requires 1x7” to 1x10” barrel twist.) .38 Short Colt L11-39919 20.00 91.00 175.00 77 gr. HPBT MatchKing 500/box L11-18171 157.95 .38 Special L11-31278 18.00 80.00 154.00 (Requires 1x7” to 1x10” barrel twist.) .38 Super +P L11-31276 20.00 90.00 173.00 6mm/.243 Caliber .38 Super Comp L11-30257 20.00 90.00 173.00 70 gr. HPBT MatchKing 100/box L11-12386 30.95 .357 SIG L11-30528 22.00 102.00 196.00 6.5mm .40 S&W L11-31283 20.00 93.00 180.00 123 gr. HPBT 100/box L11-14459 44.95 10mm L11-31281 21.00 98.00 188.00 142 gr. HPBT 100/box L11-14460 46.95 .45 ACP L11-31284 22.00 99.00 190.00 7.62mm/.308 Caliber .45 Auto Rim L11-31279 24.00 109.00 209.00 168 gr. HPBT MatchKing 100/box L11-10177 42.95 .45 Colt L11-30259 24.00 111.00 214.00 175 gr. HPBT MatchKing 100/box L11-17481 44.95 .500 S&W Magnum L11-38596 61.00 281.00 542.00 GSI Load-ReadyTopBrass Brass International Pre-Lube for Lead Bullets 100% Reconditioned All Top Brass, Inc. reconditioned Eliminates the brass products receive a full visual sticky wax feel inspection prior to packaging. lead bullets have. 5 pack .223 Remington, 1000 L11-19545 $169.95 L11-17108 9mm Parabellum, 1000 L11-19546 129.99 $6.95 .40 S&W, 1000 L11-19547 149.99 ARMSCOR Projectiles Privi Partisan Projectiles .357 Cal. 158 gr. FMJ 100/pkg. L11-15819 $11.99 .308 Cal. 150 gr. FMJ 100/pkg. L11-15809 $27.99 .45 Cal. 230 gr. FMJ 100/pkg. L11-15814 15.99 .357 Cal. 158 gr. JHP 100/pkg. L11-15808 17.99 .40 Cal. 180 gr. JHP 100/pkg. L11-15812 20.99 .45 Cal. 230 gr. FMJ 100/pkg. L11-15813 22.99 “Famous Maker” Match Bullet Seconds .308 Cal., 168 gr., HPBT, 100/pkg. L11-19665 31.95

WARNINg: These products contain lead, which is known to cause birth defects, other reproductive harm and cancer. Handling components, ammunition, cleaning firearms or discharging firearms in poorly ventilated areas may result in lead exposure. Have adequate ventilation at all times and wash your hands thoroughly after exposure.

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com SNS Casting Hard-Cast Lead Bullets43 Hard-Cast Lead Bullets Stock # 500 1000 .380 RN 95 gr. L11-15393 40.00 $74.00 9mm RN 115 gr. L11-15306 $39.00 $73.00 9mm RN 115 gr. L11-15394 41.00 76.00 9mm RN 125 gr. L11-15258 40.00 74.00 9mm RN 124 gr. L11-15331 42.00 78.00 9mm FP 125 gr. L11-15279 40.00 74.00 9mm FP 125 gr. L11-15396 42.00 78.00 9mm RNFP 147 gr. L11-15259 43.00 80.00 9mm RN 125 gr. L11-15332 42.00 78.00 .38/.357 RN 95 gr. L11-15291 37.00 69.00 9mm No-Lube-Groove 125 gr. L11-15756 42.00 78.00 .38/.357 RNFP 100 gr. L11-15260 38.00 72.00 9mm FP 147 gr. L11-15333 47.00 88.00 .38/.357 RN 125 gr. L11-15261 40.00 74.00 9mm/.38 Super RN 160 gr. L11-15397 52.00 97.00 .38/.357 RNFP 125 gr. L11-15307 40.00 74.00 .38/.357 RN 95 gr. L11-15858 40.00 74.00 .38/.357 DEWC 148 gr. L11-15262 43.00 80.00 .38/.357 RNFP 100 gr. L11-15859 41.00 76.00 .38/.357 SWC 158 gr. L11-15263 43.50 81.00 .38/.357 FP 105 gr. L11-15860 42.00 77.00 .38/.357 RN 158 gr. L11-15292 43.50 81.00 .38/.357 FP 125 gr. L11-15879 42.00 79.00 .38/.357 RNFP 158 gr. L11-15264 43.50 81.00 .38/.357 RNFP 130 gr. L11-19679 44.00 81.00 .38/.357 RN 160 gr. L11-15281 43.50 81.00 .38/.357 DEWC 148 gr. L11-15880 47.00 88.00 .40/10mm FP 140 gr. L11-15265 42.00 78.00 .38/.357 SWC 158 gr. L11-15881 52.00 97.00 .40/10mm SWC 175 gr. L11-15266 50.00 92.00 .38/.357 RN 160 gr. L11-15400 52.00 97.00 .40/10mm FP 180 gr. L11-15267 50.50 94.00 .40/10mm FP 140 gr. L11-15335 47.00 87.00 .40/10mm RN 200 gr. L11-15285 49.00 91.00 .40/10mm RNFP 165 gr. L11-19677 55.00 101.00 .44 RNFP 180 gr. L11-15283 50.50 94.00 .40/10mm FP 175 gr. L11-15336 57.00 106.00 .44 RNFP 200 gr. L11-15274 53.00 98.00 .40/10mm FP 180 gr. L11-15337 58.00 107.00 .44 RNFP 240 gr. L11-15275 60.00 110.00 .40/10mm RN 200 gr. L11-15338 60.00 112.00 .44 SWC 240 gr. L11-15276 60.00 110.00 .40/10mm FP 220 gr. L11-15855 66.00 123.00 .45 SWC 185 gr. L11-15269 50.50 94.00 .44 RNFP 200 gr. L11-15882 60.00 112.00 .45 SWC 200 gr. L11-15270 53.00 98.00 .44 SWC 240 gr. L11-15891 69.00 129.00 .45 RN 230 gr. L11-15271 57.00 106.00 .45 SWC 185 gr. L11-15856 58.00 108.00 .45 Colt RN 160 gr. L11-15293 55.00 101.00 .45 RN 200 gr. L11-15339 60.00 112.00 .45 Colt RNFP 180 gr. L11-15295 51.00 94.00 .45 RNFP 200 gr. L11-15857 60.00 112.00 .45 Colt RNFP 200 gr. L11-15272 53.00 98.00 .45 SWC 200 gr. L11-15340 60.00 112.00 .45 Colt RNFP 250 gr. L11-15273 63.00 118.00 .45 RN 230 gr. L11-15401 66.00 124.00 Stock # 250 500 .45 RN No Lube Groove 230 gr. .45/70 Govt. RNFP 405 gr. L11-15321 $64.00 $120.00 L11-19678 66.00 124.00 NEW! Coated Bullets Stock # 500 1000 Stock # 250 500 .30 M1 Carbine RN 115 gr. L11-15403 $43.00 80.00 .30/30 RNFP 158 gr. L11-15854 $27.00 $50.00 44

LASSIC IREARMS By John Marshall C F were engraved as “first: editions.”The The newSmith gun had tool & steel Wessonhammer and high-impact Model plastic grip era,645 the front ofPistol the trigger guard was recurved and Once upon a time, not long ago, guns were an externally ramped barrel with full chamber sup- panels, the entire gun, including springs, was made grooved aggressively. This gave great purchase for made of steel. The plastic on them, if it existed at port. This made it very resistant to case blowouts of stainless steel. Even the magazine followers those whose two-handed grip style included an all, was confined to the grip panels. Many really when hot loads were used. An added benefit of were stainless. Weighing in at 38 ounces, other index finger wrapped around the trigger guard. robust examples of both revolvers and pistols were that barrel ramp was that the gun would even feed stats included a 5” barrel and an overall length of Smith & Wesson’s first .45 ACP autoloader was made to last a lifetime – maybe several lifetimes. empty cases out of the magazine – an impressive 8.75 inches. Fixed high-visibility front and rear an immediate hit with the press. However, no Just to name a couple of them, the Model 1911 pis- demonstration of feeding reliability. The word was sights were employed. While the very early front new gun is without its perceived faults. The main tol and the S&W .357 Magnum revolver were out that if you could fit square bullets into the sights had a black insert, most had the classic S&W one noted in reviews was that the safety lever on around well before the middle of the 20th Century. cases, that gun would feed them! red one. The rear sight had a white outline. A mag- the right side tended to come loose from firing. A Both of these guns were well regarded, and most of The new Model 645, announced and demon- azine safety was provided, and the gun could not few drops of locking compound on its central them are still around, functional as ever today. strated in April of 1985, was a “traditional double be fired if the magazine was removed. There was screw easily and quickly took care of that. While Back when Smith & Wesson first introduced its action” hammered design, similar to the original also an automatic firing pin safety to prevent firing it was admittedly heavy, its built-like-a-tank con- groundbreaking 9mm double- struction also gave it very manageable action Model 39 in 1954, gun recoil and made it a pleasure to shoot. writer Elmer Keith began The big gun sold well and found favor calling for them to make a with many police organizations, similar all-steel gun cham- including the Los Angeles Police bered for .45 ACP. He Department. It was well-publicized thought a scaled up Model when Don Johnson, as “Sonny 39 would be just the ticket Crockett” on the TV show Miami as an ideal handgun for the Vice, used it conspicuously in military, the police, and the show’s third and fourth civilians wanting a really seasons. In the fifth (and final) effective defense gun. season, he started using its Sadly, it took Smith and cosmetically improved suc- Wesson a number of years to cessor, the Model 4506. begin work on just such a pistol. In the The original 645 was pro- late 1960s, rumors surfaced that a couple of proto- Model 39 and its descendents. It duced until 1988. type .45 ACP double-action pistols actually existed had a hammer-dropping safety a lot Towards the end of production, a at Smith & Wesson. They had evidently heard the like that first introduced on the more secure fastening system for the call and were going to introduce their very first .45 Walther PP, but this one was ambidex- right-hand manual safety was devised, ACP self-loader! The public’s high hopes were trous with levers on both sides of the and an adjustable rear sight became dashed when nothing much happened. A few pho- slide. The first shot could be fired available. There was a spinoff Model tos of a .45 resembling Smith’s Model 52 .38 Spe- double action if desired, while sub- 745, which was a single-action target cial target gun surfaced but that was about it. sequent shots would be triggered in version of the 645. Built from 1986 to Although the calls continued for a .45 double- 1990, it had a stainless frame, a blued action pistol, it was not until 1984 that the ball slide, a match barrel, walnut stocks really got rolling at S&W in earnest. and a fixed Novak or optional What came out of the development shop at “It was well- adjustable rear sight. S&W turned out to be an enlarged version of its Today, the Model 645 is a rapidly 9mm Model 639 stainless steel pistol. It was big rising collectible, not only because and it was heavy, but tests showed that not only publicized when Don Johnson, as it was the very first S&W .45 ACP was it incredibly reliable, but it could handle pow- autoloader, but because it was erful loads like the .45 Super without a problem. ‘Sonny Crockett’ on the TV show uber-reliable and nearly inde- For the fans of .45 ACP autoloaders, Smith’s first structible. Although it has many chambering in that caliber was state of the art. The Miami Vice, used it conspicuously in good modern-day descendents, only other double-action .45 ACP pistol at the time the original is noted for being was the Sig Sauer P220 – a good gun, but very exceptionally well built. The expensive to acquire and foreign made. The P220 the show’s third and fourth seasons. pistol illustrated was shipped also had an aluminum frame, a ramp in the cham- in December of 1986. It still ber and a stamped heavy-gauge blued slide. In the fifth (and final) season, he looks as good and works as Although it was a quality item, these were factors well as the day it left the S&W that did not give a lot of confidence in its reliability plant in Springfield. There is just or longevity. Although 100 prototypes had invest- started using its cosmetically improved something about a tough steel- ment cast stainless steel receivers, S&W’s produc- framed .45 pistol that reeks of timeless quality and tion guns had traditional forged receivers. This gave single-actionsuccessor, mode. The barrel was thelocked andmodelunless 4506. the trigger was fully to the rear. The single- that makes it a pleasure to have and to use. Black strength and as well as rust resistance. The cast unlocked with the slide by an integral cam similar stack magazine held 8 rounds, one up on the stan- polymer-framed handguns can be made cheaper receiver guns were later offered to S&W employ- to that employed on the Browning High Power pis- dard M1911 magazine. With one in the chamber, and lighter, but I am yet to be convinced that “bet- ees. Twenty-five guns in the first production run tol. Except for an aluminum backstrap, a plated this made it a 9-shot machine. In the style of that ter” is a word that can be applied. 45

LASSIC IREARMS By John Marshall C F were engraved as “first: editions.”The The newSmith gun had tool & steel Wessonhammer and high-impact Model plastic grip era,645 the front ofPistol the trigger guard was recurved and Once upon a time, not long ago, guns were an externally ramped barrel with full chamber sup- panels, the entire gun, including springs, was made grooved aggressively. This gave great purchase for made of steel. The plastic on them, if it existed at port. This made it very resistant to case blowouts of stainless steel. Even the magazine followers those whose two-handed grip style included an all, was confined to the grip panels. Many really when hot loads were used. An added benefit of were stainless. Weighing in at 38 ounces, other index finger wrapped around the trigger guard. robust examples of both revolvers and pistols were that barrel ramp was that the gun would even feed stats included a 5” barrel and an overall length of Smith & Wesson’s first .45 ACP autoloader was made to last a lifetime – maybe several lifetimes. empty cases out of the magazine – an impressive 8.75 inches. Fixed high-visibility front and rear an immediate hit with the press. However, no Just to name a couple of them, the Model 1911 pis- demonstration of feeding reliability. The word was sights were employed. While the very early front new gun is without its perceived faults. The main tol and the S&W .357 Magnum revolver were out that if you could fit square bullets into the sights had a black insert, most had the classic S&W one noted in reviews was that the safety lever on around well before the middle of the 20th Century. cases, that gun would feed them! red one. The rear sight had a white outline. A mag- the right side tended to come loose from firing. A Both of these guns were well regarded, and most of The new Model 645, announced and demon- azine safety was provided, and the gun could not few drops of locking compound on its central them are still around, functional as ever today. strated in April of 1985, was a “traditional double be fired if the magazine was removed. There was screw easily and quickly took care of that. While Back when Smith & Wesson first introduced its action” hammered design, similar to the original also an automatic firing pin safety to prevent firing it was admittedly heavy, its built-like-a-tank con- groundbreaking 9mm double- struction also gave it very manageable action Model 39 in 1954, gun recoil and made it a pleasure to shoot. writer Elmer Keith began The big gun sold well and found favor calling for them to make a with many police organizations, similar all-steel gun cham- including the Los Angeles Police bered for .45 ACP. He Department. It was well-publicized thought a scaled up Model when Don Johnson, as “Sonny 39 would be just the ticket Crockett” on the TV show Miami as an ideal handgun for the Vice, used it conspicuously in military, the police, and the show’s third and fourth civilians wanting a really seasons. In the fifth (and final) effective defense gun. season, he started using its Sadly, it took Smith and cosmetically improved suc- Wesson a number of years to cessor, the Model 4506. begin work on just such a pistol. In the The original 645 was pro- late 1960s, rumors surfaced that a couple of proto- Model 39 and its descendents. It duced until 1988. type .45 ACP double-action pistols actually existed had a hammer-dropping safety a lot Towards the end of production, a at Smith & Wesson. They had evidently heard the like that first introduced on the more secure fastening system for the call and were going to introduce their very first .45 Walther PP, but this one was ambidex- right-hand manual safety was devised, ACP self-loader! The public’s high hopes were trous with levers on both sides of the and an adjustable rear sight became dashed when nothing much happened. A few pho- slide. The first shot could be fired available. There was a spinoff Model tos of a .45 resembling Smith’s Model 52 .38 Spe- double action if desired, while sub- 745, which was a single-action target cial target gun surfaced but that was about it. sequent shots would be triggered in version of the 645. Built from 1986 to Although the calls continued for a .45 double- 1990, it had a stainless frame, a blued action pistol, it was not until 1984 that the ball slide, a match barrel, walnut stocks really got rolling at S&W in earnest. and a fixed Novak or optional What came out of the development shop at “It was well- adjustable rear sight. S&W turned out to be an enlarged version of its Today, the Model 645 is a rapidly 9mm Model 639 stainless steel pistol. It was big rising collectible, not only because and it was heavy, but tests showed that not only publicized when Don Johnson, as it was the very first S&W .45 ACP was it incredibly reliable, but it could handle pow- autoloader, but because it was erful loads like the .45 Super without a problem. ‘Sonny Crockett’ on the TV show uber-reliable and nearly inde- For the fans of .45 ACP autoloaders, Smith’s first structible. Although it has many chambering in that caliber was state of the art. The Miami Vice, used it conspicuously in good modern-day descendents, only other double-action .45 ACP pistol at the time the original is noted for being was the Sig Sauer P220 – a good gun, but very exceptionally well built. The expensive to acquire and foreign made. The P220 the show’s third and fourth seasons. pistol illustrated was shipped also had an aluminum frame, a ramp in the cham- in December of 1986. It still ber and a stamped heavy-gauge blued slide. In the fifth (and final) season, he looks as good and works as Although it was a quality item, these were factors well as the day it left the S&W that did not give a lot of confidence in its reliability plant in Springfield. There is just or longevity. Although 100 prototypes had invest- started using its cosmetically improved something about a tough steel- ment cast stainless steel receivers, S&W’s produc- framed .45 pistol that reeks of timeless quality and tion guns had traditional forged receivers. This gave single-actionsuccessor, mode. The barrel was thelocked andmodelunless 4506. the trigger was fully to the rear. The single- that makes it a pleasure to have and to use. Black strength and as well as rust resistance. The cast unlocked with the slide by an integral cam similar stack magazine held 8 rounds, one up on the stan- polymer-framed handguns can be made cheaper receiver guns were later offered to S&W employ- to that employed on the Browning High Power pis- dard M1911 magazine. With one in the chamber, and lighter, but I am yet to be convinced that “bet- ees. Twenty-five guns in the first production run tol. Except for an aluminum backstrap, a plated this made it a 9-shot machine. In the style of that ter” is a word that can be applied. DP 46 Pan Sifter & Ammo Can from Berry’s Manufacturing odeled after Mthe military .30 Caliber ammo can, this tough unit has a gasket in the lid to protect contents from moisture. It’s approximately 11” long x 7” high x 4” wide at its largest di- mensions and holds 550 .223 rounds or n injection molded pan sifter that fits on top of a 1000 9mms. Made Abucket to separate your brass from cleaning media. in the USA and comes with a lifetime warranty. Berry’s Mfg. Pan Sifter L11-17519 $9.99 Berry’s Mfg. Clear Ammo Can L11-17518 $9.99 SAVE YOUR BRASS!

he SHELLSORTER is a simple product designed to reduce Tthe time you spend sorting brass, allowing you to enjoy more time reloading and shooting. The SHELLSORTER is comprised of three pans designed to sort several common calibers. The fastest way to sort is to stack all three of the pans together on a common five-gallon bucket, yellow pan on top and black on the bottom; in that way, with a ick up your brass the easy way! This takes the hard few shakes all your brass is sorted by caliber at the same Pwork out of policing up your brass. No more aching time. The SHELLSORTER is made of ABS, a strong plastic back from bending over or kneeling at the range! that will give a lifetime of service. L11-21894 $44.95 L11-19972 $39.95 Stainless Steel High Bullet Puller Dial Caliper Tech Digital Caliper • .100 per revolution. • Covered track for longer caliper life – keeps chips out! • Made of hardened stainless steel. • Satin chrome finish. No glare. obody’s perfect. A bullet puller • Easily read to .001-inch on large, Accurate, Nmakes it easy to recover all your adjustable dial. components. • Measuring faces hardened, ground Easy to Read! Bullet Puller L11-17999 $29.95 and lapped. Puller Cap L11-17948 4.95 L11-13462 $28.00 L11-17171 $39.95 Collet Set L11-17947 5.99 Concealed Carry Tote47 $4500 L11-18193

illon’s Concealed Carry Tote accommodates all the tools ‘Plan B’ Day Planner Dyou need to survive the urban jungle! illon’s “Plan B” Day Planner Holster holds a handgun This low-profile carry case looks like a mild-mannered- Dand a spare magazine or pepper spray, yet it fits in with computer-nerd accessory, but it’s designed for your pistol as business clothing and won’t draw undue attention. It looks well as your PC! Made of rugged fabric, with heavy duty like a typical day planner, but inside there’s a holster that’s zippers on all three main compartments – one designed to adaptable for either right- or left-hand draw. It fits most hold a laptop computer, one for folders and paperwork, .380, 9mm, .40 and .45 caliber autos, including: Beretta, and one in the middle for a handgun. Colt, GLOCK, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, and Inside the case are pockets and pouches that will hold Smith & Wesson. Will also hold small-frame revolvers with spare magazines as well as folding knives, letter openers, two- to four-inch barrels. flashlights, cell phones, full-sized 8.5” x 11” paper note “Plan B” Day Planner L11-10252 $24.95 pads, etc. Measures 13.5” x 11.5” x 6.5” deep. TUFF PRODUCTS MAG POUCHES

Front view with flap. Front view without flap. Rear shows loops and Molle fasteners. uff Products Magazine Pouches are the most versatile we’ve ever Black 8-Magazine Single-Stack (1911) L11-19854 $39.95 Tseen. They can be worn on a belt or attached to anything that has Brown 8-Magazine Single-Stack (1911) L11-19855 39.95 a MOLLE fastener system; for instance, the Dillon Range Bag, a tacti- Black 5-Mag. Double-Stack (9/.40 GLOCK) L11-19856 39.95 cal vest or body armor carrier. Available in black or coyote brown. Brown 5-Mag. Double-Stack (9/.40 GLOCK) L11-19857 39.95 Comtech’s Baschieri & Pellagri STINGER 12 Ga. Target Slug HE STINGER: TComtech’s own per- sonal defense device. Designed treamlight’s Nano Light® LED to act as a “force multipli- flashlight is super bright (10 er,” it’s like having the punching power of a S lumens), can be seen a mile away, is karate master – instantly! There’s really noth- ing like it for easy carry and access.It passes made of virtually indestructible un-noticed by 90 percent of people who see machined aluminum with an anodized finish, is weatherproof, it. Yup, just another “keychain device” to Reduced recoil, 1200 fps most, and yet it works so well when needed. 25 per box nearly weightless and fits on your You deserve a Stinger today! keychain or zipper pull tab! L11-19495 $9.95 L11-19214 $21.00 L11-19942 $11.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 48

By Chuck Klein In the stay-alive world, if you see the “threat” [Editor’sINSTINCT Note: I’m aware that “point shooting” is COMBAT(target) advance toward you with deadly intent,SHOOTING – THE TRICKS anathema to the “modern technique,” just as I’m you will most likely be looking at him with your aware that some swear by the Weaver stance and oth- undivided attention. That is not enough. Having ers prefer the isosceles; and that there are IPSC/USPSA decided to engage in a close-quarter firefight, you shooters, IDPA shooters, and others who believe should – while in the process of going from that EITHER discipline “will get you killed in the real point of decision to battery – focus on a small world.” However, having studied Shooting to Live by point (button, stain, shirt pattern). This intensity of Fairbairn & Sykes, Kill or Get Killed, by Applegate, as vision and concentration – at the instant just well as Chuck’s book, Instinct Combat Shooting, before firing – will allow your natural mental pow- Defensive Handgunning for Police, I believe it’s worth ers to coordinate the hand and trigger finger to considering instinctive shooting as an alternative prac- cause the firearm to discharge at the most oppor- tice technique, particularly for those of us with presby- opic vision, i.e. “I can see the target or (through my tune moment. bifocals) I can see the sights, but I can’t see them both All of this needs to happen in a very small at the same time.”] timeframe, e.g., just short of simultaneous. 1) See the target; WARNING: For 2) Decide to these “Tricks” to be shoot; successful, the 3) Start the gun shooter must be moving toward bat- practiced in the sub- tery (the point where ject field and is thus the gun is at its advised to read the shooting position – book, Instinct Com- usually when the bat Shooting, Defen- support hand con- sive Handgunning tacts the shooting for Police (Third Edi- hand); tion) or other publi- 4) Focus on a cations of similar small target-within- expertise. the-target; and he act of causing 5) Pull the trigger Ta bullet to impact at the instant the the target where you firearm reaches bat- intend is akin tery. to throwing a base- Some might call ball, dart, beanbag this intense focus or other similar “tunnel vision.” It is. eye/hand/mind Though tunnel vision events. The chal- has been projected lenges encountered as a no-no, it is while acquiring any mandatory during of these skills can be overcome when instinct and the brief moment when you transition from decid- practice are combined. The technique – the trick – ing to shoot to the completion of that shot(s). Of is to not only look at the target, but to look at the course, you have to be aware of additional threats smallest part of the target while devoting full con- and the background (innocents), but only before centration just before and during release of the the decision to shoot. Once the timeframe of shot/throw. This focus on the target is more than a decide-to-shoot to completion-of-the-shot(s) has visual knowledge of the target; it is total attention begun, full concentration – oblivious to all else – to the target-within-a-target. You don’t have to is required. This timeframe during which you are stare at the target, only see it and focus on a small engaged in tunnel vision is only a matter of mil- portion of it while the body/hand is moving to liseconds. Perhaps world champion racecar driver point of fire. Phil Hill said it best: “True concentration is not INSTINCT COMBAT SHOOTING: The aware of itself.” (Car and Driver, November 1962) act of operating a HANDGUN by Many articles, columns and books have focusing on the target and instinctively espoused the virtues of “watching the coordinating the hand and mind to front sight” while engaged in combat cause the HANDGUN to discharge at a shooting. If these reports are studied time and point that ensures interception closely, it is evident that the writers are, of the target with the projectile. in almost all cases, relating to shooting 49

contests at inanimate targets. During body’s inability to react to the mind’s change of INSTINCT COMBAT SHOOTINGreal life/death scenarios survivors – sel- THEplan in a timely TRICKS manner. If the brain is instinctively dom have the luxury of taking their eyes conditioned to shoot when the gun reaches bat- off of the threat to focus (adjust point of tery, but you consciously override this function aim) on the front sight much less seek a you will not be able to readjust to the added con- perfect sight picture. ditions. This is because the gun is always moving, Shooting for score/time during a close- Skeet and bird hunters, who shoot instinctively, quarter combat match is a recreation practice this technique. On the clay bird or hunt- where the danger lies in forming nega- ing field, a shot-gunner shoots the instant his gun tive survival skills/habits. Shooting to contacts his shoulder and cheek – his body mov- survive should be a self-mandate. Prac- ing with the target and eyes having locked on to tice what you need to survive and save the bottom edge of the target or head of the bird the fun stuff for your retirement years. It while the gun comes to battery. is my suggestion that during close-quar- Flash sight picture, front sight only or aimed ter police-style matches the sights be fire defeats real-time instinct shooting. Body parts taped (covered) on all competitors’ can’t react to the mind’s ability to make changes at handguns. In addition, aerial targets the same speed. Trying to focus on a mechanical (using paintball, Simunition or pellet/BB sight, look at the target, and then make a decision gun) should be included in the contests. to adjust or not adjust the alignment takes time. In other words, in that nanosecond where: Timing, as they say, is everything. And in 1) Your eyes have picked the target-within-the- instinct shooting nothing could be more critical. target; This is the hard part. You can have all the basics 2) Your firearm is moving toward battery; down pat, be an expert at mechanical exercises, 3) Your mind is coordinating the exact instant stare intently at a pinpoint on the target, but to send the message to pull the trigger; if the eyes ignore the body/mind instinctive reflexes. Having send an additional message to realign/confirm the the timing as second nature will allow hits on sight picture the timing will be off and though it non-prearranged targets from non-standard body might only take a split second to do so, that split positions. It’s not only about staring at the target or second could cause a miss. even the target-within-the-target. It’s also about timing, e.g., a series of motions and actions where Every day as part of my exercise routine, the mind’s computer – from visual input – instructs I practice instinct combat shooting, the arm and trigger finger when and how to act. albeit, sans a gun. With my hands in the The mind computes much faster than the body chest ready defensive position, I begin can react. Thus, it is not necessary to stare or by scanning the room. When I locate a spend more than an instant focusing on the target- target, I start my simulated draw while within-the-target. This is especially important if the focusing on a target-within-the-target target is moving. To be successful during a close- and pull-the-trigger as my hands come quarter firefight, you must be conditioned to together at battery. On the range (I live instinctively override your pre-set want to look at on a 125-acre farm), I toss wood blocks the sights. out in front of me and, using a handgun, The human brain has an uncanny ability to try to hit them while they’re airborne. adjust trigger pull, arm motion/angle and other Great challenge! If you have room to try related tactics – all without consciously thinking this be sure your misses and deflected about it. That’s why it is possible to hit a moving hits don’t go over/around the backstop. target – even with a handgun. As the eyes follow Just like making a pitch or basket, shooting-to- the target, the mind almost instantly computes survive requires conditioned reflexes that are best and directs the course and speed of the firearm accomplished by practice, commitment and famil- as it moves toward the focal point giving the trig- iarity with the task. However, to successfully ger finger the command to act at the instant of and instinctively place your strikes/baskets/shots, battery. From another perspective, if the mind is the player must be conditioned to trust his or her forced (ingrained teaching) to focus and adjust instincts. Instinct combat shooting is not trick for a sight picture, it takes more time and throws shooting, it’s practicing the “tricks.” the timing off. Chuck Klein, an active member of IALEFI, is the Another part of timing is firing the shot at the author of INSTINCT COMBAT SHOOTINg, instant the gun comes to battery. If you’ve identi- Defensive Handgunning for Police (now in its fied the target, decided to fire, focused on a pin- third edition) and other police and firearm related point, but wait even an instant longer, you will books and articles. He may be reached through have a greater chance of a miss. This is due to the his website: www.chuckklein.com. DP 50“Big Fifty Reloader” STANDARD FEATURES: • 4-Station Interchangeable Toolhead • Uses Std. 1-1/2”-12 UNF Thread Dies • Manual Shellplate indexing • Average Loading Rate: 300 Rds./Hr. • Loads High Volume/Match-Grade Ammo • Milspec/Match-Grade Priming System • Ductile Iron/Carbon Steel Construction All for ONLY... Now Available! $ 95 .408 CheyTac Conversion L11-50204 $149.95 1019 (Dies NOT Included) L11-50000 Total price as pictured here with optional accessories: $2553.80 .50 BMg Carbide Size Die L11-50075 $869.95 .50 BMg Case Trimmer L11-50050 $384.95 BFR Mounting Post (50.5” High) L11-50150 $269.95 BFR Mounting Hardware kit L11-50140 $9.95 BFR Accessories A. 50 BMg CASE TRIMMER D. 50 BMg PRIMER SEATINg DIE ASSEMBLy One of these is included with Dillon’s Features an industry standard Big Fifty Reloader, but may be used as an 1-1/2”-12 UNF threaded body, accessory on a separate toolhead. The a 1/4 HP motor, replaceable primer seating die is adjustable for carbide cutter, quick-discon- enhanced control of primer seating. Includes two primer punches: one flat, nect cord and includes the .50 A. BMG trim die. match-style primer punch and one L11-50050, $384.95 cupped, milspec primer punch. L11-50200, $149.95 D.

B. B. 50 BMg CARBIDE SIzE DIE E. 50 BMg PRIMER POCkET SWAgER The only .50 BMG size die in the indus- Makes it easy to remove the military crimp. try that’s a full-length solid carbide size L11-50001, $299.95 die, for increased die life and scratch E.(1) PRIMINg CONvERSION resistance. It also has a solid carbide Converts Swager to Priming System. expander ball, placed in the middle of L11-50003, $76.95 the power stroke for easier operation. The die body is standard 1-1/2”-12 UNF F. 50 BMg PRIMINg SySTEM thread, and is manufactured to low Allows off-the-machine primer seating. chamber tolerance specifications. L11-50002, $299.95 L11-50075, $869.95 F. (1) SWAgER CONvERSION Converts Priming System to Swager. C. 50 BMg POWDER C. L11-50004, $76.95 MEASURE ADAPTER E./F. For use with the RCBS .50 BMG powder measure. RCBS LOADINg ACCESSORIES THAT CAN BE L11-50125, $76.95 USED WITH DILLON’S BIg FIFTy RELOADER .50 BMG Manual Powder Measure L11-21896, $114.95 ExTRA “BFR” TOOLHEADS L11-19831, $179.95 .50 BMG Seat/Crimp Die L11-21895, $139.95 The Dillon Deluxe 51 Pistol Cleaning Kit SACK-UPS “SAFE SACKS” FOR YOUR GUNS Sack-Ups Protective gun Sacks NEW! AR-15 Style Rifles L11-17378 $24.99 Handgun, 13.5” Gray L11-17249 7.99 Handgun, 13.5” Black L11-17250 7.99 Handgun, 13.5” Natural L11-17252 7.99 Shotgun, 42” Black L11-17253 10.99 Rifle/Shotgun, 52” Gray L11-17247 8.99 Rifle/Shotgun, 52” Black L11-17248 10.99 illon’s Deluxe Pistol Cleaning Kit includes: a Dewey Rifle/Shotgun, 52” Natural L11-17251 8.99 DNylon Coated Cleaning Rod; Dewey bronze bore Muzzleloader, 72” Gray L11-17254 11.99 brushes in .22, .38, .40 and .45; a Dewey patch loop; a Shotgun Rcvr., 24” Gray L11-17257 8.99 Dewey Nylon Gun Parts Cleaning Brush; a 4 oz. spray Shotgun Bbl., 36” Gray L11-17256 8.99 bottle of M-Pro 7 Gun Cleaner; a 0.5 oz. bottle of Snake Sack-Ups Old West gun Protection Oil; and a 4cc tube of Snake Oil Weapon Grease. Comes Single-Action Revolver L11-18000 $8.99 packaged in Dillon’s Large Utility Box. Lever-Action Carbine 42” L11-18001 10.99 L11-97066 $56.95 Buffalo Rifle 48” L11-18003 10.99 YOU Can Wear The “Dillon” Brand Dillon Precision, Long Sleeve Dillon Precision, Short Sleeve Navy, Large L11-18507 $19.95 Navy, L L11-18511 $12.50 Navy, xL L11-18508 19.95 Navy, xL L11-18512 12.50 Navy, xxL L11-18509 20.95 Navy, xxL L11-18513 14.50 Navy, xxxL L11-18510 22.95 Navy, xxxL L11-18514 14.50 gray, Large L11-18523 19.95 gray, Large L11-18527 12.50 gray, xL L11-18524 19.95 gray, xL L11-18528 12.50 gray, xxL L11-18525 20.95 gray, xxL L11-18529 14.50 gray, xxxL L11-18526 22.95 gray, xxxL L11-18530 14.50 L11-11319 11.95 Black, Large L11-18515 19.95 Black, Large L11-18519 12.50 Black, xL L11-18516 19.95 Black, xL L11-18520 12.50 Black, xxL L11-18517 20.95 Black, xxL L11-18521 14.50 Black, xxxL L11-18518 22.95 Black, xxxL L11-18522 14.50 Dillon’s 1911 Dillon Bushing Wrench Action Impact Reducers n easy, affordable way to protect your favorite 1911’s Aframe from being battered by recoil. Action Impact Reducers (6 ea.) L11-20516 $4.95 L11-11049 $2.50 Thinking about burying some guns? hese 532 gram DESI®PAK desiccants absorb moisture better than sili- Tca gel. It’s an industrial grade material that exceeds the requirements of Mil Spec MIL-D-3464E. Now available in smaller packages for other applications (ammo cans, long-term storage containers, etc.). DESI®PAK (2 bags, 1 card) L11-21435 $16.95 4-ounce bag L11-14694 4.95 2-ounce bag L11-14695 2.95 Humidity Indicator Card, 6 pack L11-21523 4.95 52REDDINGREDDING ReloadingReloading DiesDies && AccessoriesAccessories

Micrometer-Adjustable Competition Seat- .270 Winchester L11-10822 47.95 .243 Winchester L11-10172 36.95 ing Dies (These are individual dies.) .270 WSM L11-18337 47.95 .25-06 L11-11336 36.95 Competition Pistol Seating Dies 6.5 Grendel L11-19893 93.95 .260 Remington L11-09993 37.95 9mm L11-10671 $91.95 6.5 x 55mm Swedish L11-11353 47.95 .270 Winchester L11-11806 36.95 .38 Super Auto L11-10672 91.95 6.8 SPC L11-12548 64.95 7mm Rem. Mag. L11-11392 36.95 .38 Special/.357 Mag. L11-10673 91.95 7 x 57mm Mauser L11-11212 47.95 .308 Win./7.62 NATO L11-10165 36.95 .40 S&W/10mm L11-10674 91.95 7mm WSM L11-18339 64.95 .30-06 L11-11763 36.95 .44 Special/.44 Mag. L11-10675 91.95 7mm Rem. SA UM L11-18338 64.95 .300 Win. Mag. L11-11108 36.95 .45 ACP L11-10676 91.95 7mm Rem. Ultra Mag. L11-18340 64.95 .45 Colt/.454 Casull L11-10677 91.95 7mm Rem. Mag. L11-11775 47.95 Crimp Dies Competition Rifle Seating Dies 7mm-08 Remington L11-12041 47.95 .32 S&W/H&R Mag. L11-11747 $27.95 .45-70 Gov’t L11-11197 $91.95 7.5mm Swiss L11-09995 81.95 .45-70 Gov’t L11-11977 35.95 Complete Three-die sets – Size, bell, seat 7.62 x 39mm Russian L11-12045 62.95 Powder Measure, Reloading Accessories .32 ACP L11-15521 $64.95 .30-30 Winchester L11-29020 47.95 Match-Grade Model 3 BR Measure .32-20 Winchester L11-11906 64.95 .30-40 Krag L11-11835 77.95 L11-10121 $179.95 .38-40 Winchester L11-11838 84.95 7.62 x 54mm Russian L11-09994 62.95 Large (7.5”) Powder Reservoir .38-55 Win./Ballard L11-19106 81.95 .300 AAC Blackout L11-12550 84.95 L11-10123 $12.95 .44-40 Winchester L11-11692 47.95 .300 WSM L11-15763 47.95 X-Large (10”) Powder Reservoir .45-70 Gov’t L11-12700 64.95 .300 Rem. SA UM L11-18341 62.95 L11-10124 $13.95 Complete Two-Die Sets .300 Rem. Ultra Mag. L11-18342 47.95 Powder Trickler L11-11986 $26.95 .204 Ruger L11-12547 $47.95 .300 Weatherby L11-11354 47.95 Stuck Case Removal Kit L11-12186 $23.95 .22 Hornet L11-11484 47.95 .300 Win. Mag. L11-12046 47.95 Specialty/Custom Die Sets .220 Swift L11-12182 47.95 .303 British L11-11691 64.95 .22-250 L11-15761 47.95 8 x 57mm Mauser L11-09996 47.95 .50 AE L11-14514 $49.95 .243 Winchester L11-15762 47.95 .338 Win. Mag. L11-11774 47.95 (Incl: RCBS steel size, expander, seat/crimp) .243 WSSM L11-11193 47.95 .338 Lapua Mag. L11-21354 128.95 .500 S&W L11-11114 $49.95 .25-06 Remington L11-12183 47.95 Individual Dies: Neck-Size-Only Dies (Incl: RCBS steel size, expander, seat/crimp) .25 WSSM L11-11194 50.95 .223 Remington L11-10164 $36.95 RCBS Carbide .500 S&W Size Die only .260 Remington L11-09997 47.95 .22-250 L11-11184 36.95 L11-19923 $40.95 Dillon’s New Bench Wrench RCBS EQUIPMENT Fits new 1” die lock rings

characteristic of virtually all progressive reloading ma- Achines, regardless of brand, is that the dies are set rather close together. When you are first setting up a “naked” ma- chine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. Dillon Precision has addressed this in two ways. We now offer new 1” die lock rings and a 1” Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they’re already mounted. The opposite end of our Trim Pro-2™ Case Trimmer kit L11-43231 $139.95 The RCBS Trim Pro-2 manual case trimmer now features a new wrench is a 7/16” box-end for adjusting the Powder Bar spring-loaded “universal” shell holder that will accommo- of any Dillon Powder Measure. Our new lock rings fit any date case head diameters from .250” to .625”. Comes with standard 7/8” x 14 dies. pilot calibers: .22, .24, .25, .27, .28, .30, .35, .44 and .45. 1” Dillon Die Lock Ring L11-14067 $1.35 RCBS Scale Check Weights Standard Set: 60.5 grains for powder charges. 5-Pack of Die Lock Rings L11-10669 4.15 L11-12297 $34.95 1” Dillon Bench Wrench L11-10842 7.95 Deluxe Set: 510.5 grains for bullets, cases and powder. (Buy two or more 1” Bench Wrenches for $7.10 each) L11-12458 $49.95 Wrench/Lock Ring 5-Pack L11-10668 9.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 53 Apex Tactical Specialties Armorer’s Block Grace USA Gun Care Tool Set his custom Tdesigned 12” x 9” x 1-1/2” case is made from durable soft Nukaf and con- tains a 17-piece set of Grace USA Gun Care Screwdrivers (8 ea.), Solid Brass Pin Punches (8 ea.) pex Tactical Specialties’ Armorers Block is designed and a specially fab- Afor S&W Semi Auto M&P Pistols in all calibers, sizes ricated 8 Oz. Brass and configurations, including thumb-safety models and Hammer. The the M&P Shield; also for GLOCK® semiauto pistols in all screwdrivers are sizes and calibers. The Armorer’s Block supports a pistol hand-assembled for armory work and detail disassembly. Its pre-positioned and custom hollow bosses, slots and holes remove pressure from critical ground to fit scope function surfaces while pins are driven in and out. High- screws, plug screws, guard screws, etc. The handles are density polymer construction prevents marring of the turned from quality Maine hardwood and protected with frame while driving pins in and out. Made in USA. a smooth finish. Made in USA. Armorer’s Block L11-19536 $29.95 Grace USA Gun Care Tool Set L11-10680 $99.95 Bondhus Hex Key Sets More Great Tools From Grace USA!

Grace USA’s 7-Piece Steel Roll Pin Punch Set includes the following sizes: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, and 7/32”. Each is proudly Made in USA! Roll Pin Punch Set L11-15065 $39.95 About Grace USA: Grace USA gun care products are made with precision, and de- Grace USA’s 9-Piece Ball-End Allen Head signed specifically for gun enthusiasts Screwdriver Set includes the following sizes: who care about keeping their firearms in 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, prime condition. We are proud of our prod- Ball-end set L11-13286 $12.95 5/32”, 3/16”, and 3.5 mm. Each is con- ucts and look forward to providing you Gorilla Grip Sm. L11-16822 5.45 structed of US 8650 Chromium-Vanadium with durable tools that fit your needs and Gorilla Grip Lg. L11-16823 6.35 steel alloy and is proudly Made in USA! guarantee satisfaction. Gorilla Grip Set L11-22142 10.75 Ball-End Allen Set L11-15063 $49.95 DOC ALLEN’S VERSATOOL

The B-Square 32 Piece gun- grace USA gunsmith Hammer smith Screwdriver kit con- and Punch Sets tains 11 slotted bits oc Allen’s Versatool fits eas- 8 oz. Brass Hammer designed to eliminate screw Dily in your pocket and func- L11-14969 $14.95 head damage, 8 hex bits, 3 tions as either a screwdriver or a The Tru-Weight Trigger Ten- 16 oz. Brass Hammer Phillips bits, 2 Posi-Drive wrench. The Versatool includes sion Scale has a range from L11-15069 $18.95 bits, 2 Torx bits, 3 extra-long 11 tool bits and an extension eight ounces to eight pounds. Brass Punches (8-Pc.) bits (1 each: Phillips, slotted, shaft with the loop handle. The A unique weight indicator L11-14968 $31.95 hex), and a 1/4” socket drive loop slides to three different remains at the exact point of Steel Punches (7-Pc.) adapter. Get one for your trigger release, making it eas- L11-15070 $31.95 positions to provide varying workbench AND your range degrees of leverage to suit the ier to read your trigger pull 8 oz. Brass Hammer and 8-pc. bag! needs of the job at hand. pressure. Brass Punch Set L11-15757 $12.95 L11-14838 $26.95 L11-21655 $39.95 L11-18410 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 54 HARTMAN MFG Target Stands

Rugged! Portable! Easy-to-Use! One Target Stand L11-18237 $44.95 A Pair of Stands L11-74493 79.95 Pistol Targets: 100 per package NRA Paper D-1 “Tombstone” Target 23”x35” L11-18388 $39.95 IDPA Paper Practice Target 22”x34” L11-15735 39.95 USPSA/IPSC Paper Practice Target 22”x35” L11-15836 39.95 One Hostage Target Adapter (Shown 50 Foot TIMED/RAPID FIRE 10.5”x12” L11-15832 7.95 below attached to Target Stand – not Competition 50 Foot SLOW FIRE 10.5”x12” L11-15831 7.95 included. Works only with Hartman tar- Competition 25 Yard SLOW FIRE 10.5”x12” L11-13096 8.50 get stands.) Police (Silhouette) 25 Yard 14”x24” L11-13163 12.50 L11-11697 $22.95 Police (Silhouette) 25 Yard 22.5”x35” L11-10094 27.50 Competition 25 Yard RAPID FIRE 21”x24” L11-12839 17.50 Competition 50 Yard SLOW FIRE 21”x24” L11-10041 17.50 Police (Silhouette) 50 Yard 22.5”x35” L11-10670 27.50 Rifle Targets: 100 per package Small Bore Rifle 100 Yard 14”x14” L11-12430 $7.50 High Power 200 Yd. 21”x24” (600 Yd. reduced)L11-12650 34.50 Replacement Center 100 per package Pistol 25 Yard B8P Repair Center 10.5”x10.5” L11-12676 $4.95 200 Yard Rifle Repair Center 12.75”x12.75” L11-15830 13.45 A Pair of Target Pasters Target Black, Self-Adhesive, 500 ea. L11-16304 $3.00 Spikes Buff, Self-Adhesive, 500 ea. L11-16309 3.00 Brown, Self-Adhesive, 500 ea. L11-16310 3.00 L11-11393 White, Self-Adhesive, 500 ea. L11-16313 3.00 $22.95 NRA Pistol and Rifle Targets Orange, Self-Adhesive, 500 ea. L11-16327 3.00 Bennie Cooley’s D•WIPE Towels D•LEAD Hand Soap ESCA TECH, INC. ESCA TECH, INC. Safety Magazines •WIPE Towels riginal D•LEAD Dwere specially OHand Soap designed for immedi- quickly cleans heavy ate clean up of most metals as well as contaminants without paint dust and firing water. The soft 5.5”x range residue from 8” towels are satu- the skin and finger- • Weighted to simulate a fully loaded mag rated with a unique nails. Removes lead, • 1911 practice mag works for all calibers cleansing formula nickel, cadmium, ar- • Mags for GLOCKs work in 9mm/.40 cal. and aloe vera, and senic, mercury, silver, • If necessary, fitting is easily done with will remove heavy zinc and most other any file metals from skin and heavy metals. 1911/Clones L11-16866 $14.95 other surfaces. GLOCK 17, 22 L11-16872 14.95 40 Soft Towels L11-19916 $4.95 8 Oz. Bottle L11-19915 $2.95

gunslinger Spring kits From Lee Fisher, one of the premier “cowboy gunsmiths.” ake out your frustrations, and build Colt & clones L11-20510 $26.95 Ruger Blackhawk/Vaquero Tyour grip strength at the same time! L11-20511 $24.95 Just think about…oh, socialized medi- Marlin 94 L11-20512 $18.95 cine, tax increases, high-capacity mag- Rossi/Navy Arms 92 lever guns Peacemaker Specialists’ azine bans, etc. L11-20513 $24.95 These wooden-handled screwdrivers 1 lb. L11-15532 $7.99 Stoeger IGA shotgun were designed to fit most SAA screws. 2 lb. L11-15533 $14.95 L11-20514 $14.95 SAA 2-Driver Set L11-15486 $19.95 Note: These Come in Assorted Colors 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 55 Otistis Technology’s Technology B.O.N.E.® Tool effec- B.O.N.E. Tool and RIPCORD Otively cleans the AR-15 bolt carrier assembly area including the bolt, bolt car- rier and firing pin. he RIPCORD™ is a rapid firearm cleaning sys- Ttem featuring Nomex® fibers that act as both a brush to loosen and a patch to capture fouling particles. Otis Technology B.O.N.E. Tool L11-18985 $24.99 Otis Technology RIPCORD .223 L11-18965 14.99 Otis Technology RIPCORD .308 L11-18981 14.99 Otis Technology RIPCORD 9mm L11-18982 14.99 Otis Technology RIPCORD .40 L11-18983 14.99 Otis Technology RIPCORD .45 L11-18984 14.99 Sun Devil Mfg. AR-15/10 ADIGS EGW AR-15 Forward Assist Plug un Devil Manufac- volution Gun Works’ AR- Sturing’s Adjustable E15 Forward Assist Plug is Drop In Gas System for for use on competition rifles AR-15 and AR-10 rifles that do not use the forward allows you to adjust assist. It’s anodized for long your rifle’s gas system life, matted to match most for best performance. uppers. L11-19674 $59.95 L11-18991 $9.99

oes Dyour ACCOM’s Enhanced Firing Pin for .22 Long TCiener/CMMG .22 Long Rifle AR- Rifle insert 15 caliber conversions is a direct- he TACCOM Extreme Extractor is move back and replacement firing pin, made from 17- Ta drop-in part for your forth in your AR 4 SS heat treated to a condition H900, Ciener/CMMG .22 Long Rifle insert upper? The TACCOM to present a tough, hard firing pin that that will give you consistant extrac- Pressure Plug will apply a constant won’t break or mushroom out after tion, which is KEY for a reliable pressure on your insert, always keep- many firings. The tip has been firearm. This will help with your live- ing it in the most forward position designed to stick out of the hole only round extraction, depending on how when the rifle is in battery. You can .030”, so you will not damage your well the factory has cut the chamber, install and remove the pressure plug barrel by dry firing your weapon. and the type of chamber cut. in seconds with no tools. L11-19538 $13.95 L11-19539 $10.95 L11-19533 $7.95 ™ MILDOT MASTER The Larry 8 LED itsabox! Pocket Work Light

he Larry™ 8 LED TPocket Work Light is the essential handyman light. 8 powerful LEDs provide 60 lumens of bright white light. The rotating magnetic clip gives you convenient hands-free lighting. The reinforced plastic body design is shock-proof ou can become a master at using and water-resistant, Ya Mil Dot reticle with this ballistic making the Larry™ ba- slide rule! Comes with a 24-page sically indestructible. instruction manual. L11-15432 $9.99 7.5” x 14” x 10” Mildot Master® L11-14762 $29.95 L11-14239 $14.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 56 California Competition Works’ Moon Clip Loading/Unloading Tools & Carriers

A. B.

G. F. E. D. C. A. Demooner Tool L11-18169 $16.95 E. Blued .45 ACP Moon Clips (10 ea.) L11-18183 9.80 B. MoonLoad/Unload 8-Shot .357 L11-19490 39.95 Not Pictured, Generic Stainless Steel .45 ACP Moon Clips C. MoonLoad/Unload 6-Shot .45 L11-19489 39.95 (10 ea.) L11-18280 10.50 (Will work with #16510 8-shot EDM .38/.357 moon clips on Pg. 57) F. 10mm Moon Clips (10 ea.) L11-18184 11.20 D. 6-Shot Moon Clip Holder (2 ea.) L11-18173 17.90 G. 8-Shot .357 Moon Clips (10 ea.) L11-19228 19.95 TK Custom NorthSpeed Loader Mountain Holder

The North Mountain IDPA- Moon Clips Compliant Speed Loader Holder is made specifi- cally for the competitive Chiappa Rhino 9mm/.40 S&W (10 Pk) L11-12040 $65.00 IDPA revolver shooter. Chiappa Rhino .38/.357 (10 Pk) L11-12043 65.00 Lightweight at 2.9 Oz., it N-Frame 9/.38 ACP 8-Shot (Blue) (10 Pk) L11-12044 39.95 firmly holds your competi- L-Frame 9/.38 ACP/.40 6-Shot (Blue) (10) L11-12057 39.95 tion speed loader. It is fit- S&W N-Frame .45 ACP 6-Shot (10 Pk) L11-12058 19.95 ted with a Tek-Lok™ to S&W N-Frame .45 ACP EDM 6-Shot (10) L11-12059 74.95 mount to your range belt. S&W L-Frame .38/.357 7-Shot (10 Pk) L11-12065 64.95 It fits Comp III and similar- S&W L-Frame .38/.357 6-Shot (10 Pk) L11-12066 64.95 sized speed loaders. S&W J-Frame .38/.357 5-Shot (5 Pk) L11-12088 32.50 “K-Frame” Model S&W K-Frame .38/.357 6-Shot (10 Pk) L11-12090 64.95 L11-21900 $35.00 S&W N-Frame .38/.357 8-Shot EDM (10) L11-12091 64.95 “L-Frame” Model N-Fr. .38/.357 8-rd. EDM Starline ONLY(10) L11-12092 64.95 L11-21914 $35.00 S&W N-Frame .38/.357 8-Shot (Blue) (10) L11-12093 39.95 W.C. Wolff Co. Jerry Miculek SDM Revolver Springs Competition S&W Revolver (Hammer/Trigger Return Springs) Ruger GP-100 Grips Front Sights L11-11367 $10.50 SP-101 L11-12598 9.50 $79.95 Pin-In Front Sight – $28.00 “Classic” Slip-In Sight – $35.00 S&W J Frame .250” high, red L11-18379 .250” high, red L11-18375 L11-12189 9.00 .250” high, green L11-18380 .250” high, green L11-18376 (Mainspring/Rebound Springs) .300” high, red L11-18381 .300” high, red L11-18377 S&W K,L,N (standard) .300” high, green L11-18382 .300” high, green L11-18378 S&W N-Fr. Rd. Butt L11-11324 L11-15073 $15.00 Pin-In Front Sight – $44.95 “Classic” Slip-In Sight – $44.95 N-Fr. Sq. Butt L11-11325 .250” high, Gold Bead L11-18565 .250” high, Gold Bead L11-18567 S&W K,L,N (reduced power) K, L-Fr. Rd. Butt L11-11327 .300” high, Gold Bead L11-18566 .300” high, Gold Bead L11-18568 L11-15072 15.00 K, L-Fr. Sq. Butt L11-11326 Tools from L. Bengtson Arms Co. for Smith & Wesson Revolvers Hogue “Big

A. Butt” Grips

B. Hogue Competition $59.95 S&W Revolver Thumb Latch A. Rebound Spring Tool L11-30000 $22.00 fits k, L, and N-Frames S&W N-Fr. Rd. Butt L11-12141 B. Ejector Rod Tool L11-25343 45.00 Stainless L11-19921 $59.95 K, L-Fr. Rd. Butt L11-12140 Johnson Precision California Competition Works57 Mag Rack Moon Clip Retention Systems .22 LR Speedloader

ohnson Precision’s Mag Rack™ moon clip retention system alifornia Competition Works’ 10-Round Speedloader for S&W Jholds eight of your moon clips in place with strong magnets. The CModel 617 .22 LR Revolvers is ideal for Steel Challenge or Mag Rack may be permanently attached to a belt with included Ruger Rimfire Series competition. The speedloaders are machined fasteners, or temporarily with the optional belt loops. from 6061 T6 aluminum, then black anodized. The Loading Block Mag Rack, 8-Shot 627 L11-25367 $149.95 (inset photo) is CNC machined from polymer and holds 120 rounds Mag Rack, 7-Shot 686 and 6-Shot 625 L11-25368 149.95 of .22 LR ready for insertion into speedloaders. Accessory Belt Loops L11-25369 9.95 CCW Model 617 Speedloader L11-12623 $34.95 CCW .22 LR Loading Block/Case L11-12627 49.95 Stainless EDM 8-Shot Moon Clips NorthMoon Clip Mountain Holder

hese .025 EDM TStainless Moon $ 95 Clips are designed 59 to fit Remington L11-16510 brass SNUGLY, Sold in Packages of 10 ’ve tried several methods of holding my moon clips, and this eliminating nasty for 8-Shot S&W Iworks best for me! My hand only has to go to one place, so I no “cartridge flop” 627 Revolvers longer grope around frantically for my reloads. – Mark Pixler when you reload. For 610/625, 7-Shot 686, 8-Shot 627 L11-21883 $130.00 Safariland Competition Gear for Revolver Enthusiasts 002 “Cup Challenge” $69.95 6” S&W K,L,N; Std. bbl. L11-17788 333 “Speedloader Holder” $34.95 S&W K-Frame L11-12411 S&W L-Frame L11-13087 “Competition Speedloaders” $19.95 S&W K-Frame L11-13224 S&W L-Frame L11-13117 Revolver “Speedloaders” $11.95 S&W J-Frame (5-Shot) L11-12405 S&W K-Frame L11-13104 S&W L-Frame L11-13074 “Speedloader” Holders $9.95 Sm./Med. Fr. L11-10340 “Speedloader Loading Blocks” $24.95 S&W K-Frame L11-12262 S&W L-Frame L11-12878 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 58 Performance Parts for Your GLOCK® Firearm

A. B. C. D.

E. F. G.

GLOCK® Factory Original Parts: Wolff Spring Co. Parts for GLOCK firearms: A. Extended Mag Release (Small Frame) L11-18569 $9.95 Competition Spring Set L11-11524 $9.95 B. Extended Slide Release L11-18570 19.95 Trigger Return Spring 3-Pack L11-11818 7.99 C. Striker Cups (The ones you always lose.) L11-19325 4.95 X-Tra Power Trigger Rtn. Spr. 3-Pk. L11-15558 7.99 D. Striker Channel Liner L11-18881 9.95 Guide Rod, GLOCK 17, 22, 31 L11-11356 24.95 Lone Wolf Distributors’ Parts for GLOCK firearms: Guide Rod, GLOCK 19, 23 L11-11435 24.95 E. Extended Mag Release (Large Frame) L11-19115 4.99 Guide Rod, GLOCK 20, 21 L11-11352 24.95 F. Extended Take-Down Lever L11-19114 9.95 Recoil Spring, 12# L11-11420 7.99 G. 3.5# Trigger Stop Connector L11-16501 14.95 Recoil Spring, 14# L11-11418 7.99 Extended Slide Stop L11-22299 15.99 Recoil Spring, 15# L11-11419 7.99

Competition Guide Rod Kit Jentrahe Jentra Competition Guide Rod Kit for GLOCK Gen4 G- spring for faster and easier spring changes, and comes with a pre- T17/G-34 type slides features the largest diameter hardened mium quality Wolff (15 lb.) recoil spring. stainless steel guide rod for less muzzle rise. It has a non-captured L11-17106 $31.95 Lone Wolf Distributors’ Match-Grade Barrels for GLOCK Pistols NEW!

hese barrels are manufactured from the highest grade mill-select GLOCK 35 9mm Conversion Barrel L11-19331 99.95 T416 stainless forgings. Standard rifling makes these an excellent New! Threaded Barrels and Thread Protectors (Silver unless noted) choice if you wish to shoot lead, plated or jacketed bullets. Can be GLOCK 17 9mm 1/2”x28 Threaded Bbl. L11-43245 $124.95 used in factory ported or stock pistols. Ready to use, pre-fit drop in. GLOCK 17 9mm 1/2”x28 Bbl. (Black) L11-43246 139.95 GLOCK 17 9mm Barrel L11-19167 $99.95 GLOCK 19 9mm 1/2”x28 Threaded Bbl. L11-43247 124.95 GLOCK 19 9mm Barrel L11-19326 99.95 GLOCK 19 9mm 1/2”x28 Bbl. (Black) L11-43248 139.95 GLOCK 20 10mm Barrel L11-19241 99.95 GLOCK 21 .45 ACP .578”x28 Bbl. L11-43249 124.95 GLOCK 20 .40 S&W Conversion Barrel L11-19805 99.95 GLOCK 21 .45 ACP .578”x28 Bbl. (Blk.) L11-43250 139.95 GLOCK 20 .357 SIG Conversion Barrel L11-19806 99.95 GLOCK 22 .40 S&W 9/16”x24 Bbl. L11-43251 124.95 GLOCK 20 9x25 Dillon Conversion Barrel L11-19807 114.95 GLOCK 22 .40 S&W 9/16”x24 Bbl. (Blk.) L11-43252 139.95 GLOCK 21 .45 ACP Barrel L11-19242 99.95 GLOCK 22/31 9mm Conv. 1/2”x28 Bbl. L11-43253 124.95 GLOCK 22 .40 S&W Barrel L11-11526 99.95 GLOCK 23/32 9mm Conv. 1/2”x28 Bbl. L11-43254 124.95 GLOCK 22 9mm Conversion Barrel L11-11527 99.95 9mm Thread Protector Cap, Silver L11-43257 14.95 GLOCK 22 .357 SIG Conversion Barrel L11-19808 99.95 9mm Thread Protector Cap, Black L11-43258 14.95 GLOCK 23 .40 S&W Barrel L11-19327 99.95 .45 Thread Protector Cap, Silver L11-43255 14.95 GLOCK 23 9mm Conversion Barrel L11-19328 99.95 .45 Thread Protector Cap, Black L11-43256 14.95 GLOCK 34 9mm Barrel L11-19330 99.95 .40 Thread Protector Cap, Silver L11-43259 14.95 GLOCK 35 .40 S&W Barrel L11-19329 99.95 .40 Thread Protector Cap, Black L11-43260 14.95 Slide Removal Tool 10-8 Performance Armorer Tool STUL Fits All GLOCK Models ngages the slide lock and provides a Emechanical advantage making slide removal easier and faster. For those with large fingers, small fingers, tired fingers, anyone he 10-8 Performance Armorer Tool is a simple, non-marring looking for a way Ttool useful for applications where prying or poking with metal to simplify the removal tools can easily damage your work. The rigid chisel-pointed end of your GLOCK slide. and semi-flexible flat blade end each have unique uses. L11-19527 $11.95 L11-15434 $7.95 TARAN TACTICAL59 Henning BATTLEHOOK INNOVATIONS

$94.95 w/Fiber Optic Front Sight

GLOCK 17, 19, 22, 23, 24, 26, 27, 33 L11-12031 Sight Set, GLOCK® L11-15381 $84.99 Why, California Competition THE It’s Works Enlarged “The Magwells for PLUG $795 Perfect GLOCK® Pistols Installs in a snap and protects your GLOCK’s internal parts from dust, dirt, rain, snow and lint. Knife!” GLOCK Models 17, 19, 20, 21, 22, 23 (fit may vary) L11-18161 Model 21SF L11-19925 Models 26, 27, 33 L11-10235 Model 30 L11-10648 Note: Does NOT fit generation 4 glocks.

PEARCE For GLOCK 17, 19, 22, 23 GRIP, INC. L11-12523 $46.00 $995 Grip extensions do not alter mag. capacity. GLOCK 26/27 L11-10346 G29 (10 rd.)/30 (9 rd. opt. mag.) L11-10355 G30 (10 rd. mag. only) L11-10356 Kel-Tec P11/Taurus PT111 L11-18586 Springfield XD (9mm/.40 only) L11-18587 Springfield XD-S L11-15286 Mag. extensions add additional capacity. GLOCK 10mm/.45 ACP (+2) L11-18589 ® GLOCK 9/.357/.40 (+2 or 1) L11-18588 GLOCK Field Knife G27/33 (+1) L11-18590 For GLOCK 20, 21 L11-15483 $29.95 L11-12525 $46.00 GLOCK® Mags Just What’s Listed, While They Last! GTUL

rredondo’s extended magazine base Apad adds capacity to your magazines! The Arredondo base pad comes with a new spring and an installation tool that also acts as a floorplate removal tool you’ll need to leaning your GLOCK magazines has disassemble and clean your mags. Cnever been easier! GTUL has devel- Small-Frame GLOCK L11-19125 $39.95 oped an integrated system to disassemble Large-Frame GLOCK (not for 29/30) and clean all GLOCK magazines without L11-19124 39.95 G-17 L11-11363 $39.95 marring, gouging, or damaging the metal Base Pad & Spring kit for Springfield xDs G-19 L11-15806 39.95 liner. Quickly removes dirt, dust, powder XDM L11-15569 $23.00 G-21 L11-15807 39.95 residue and grime! .45 XD (+3) L11-15570 23.00 G-22 L11-11958 39.95 Standard Mags L11-20910 $21.95 Base Pad kit with Spring for S&W M&P G-23 L11-11960 39.95 Large Mags L11-20911 21.95 9mm/.40 M&P L11-19104 $23.00 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 60 Get a Grip With Hogue

A. B. C. D. E.

F. G. H. I. J.

(D.) Colt GM (Finger Grooves) L11-12803 17.95 Ruger Mark II, RH L11-16664 17.95 Hogue square Butt Monogrips Colt Python L11-12138 $17.95 (E.) K, L-Frame Square Butt L11-12786 17.95 N-Frame Square Butt L11-12145 17.95 N-Frame Round Butt L11-18100 17.95 K. Hogue Round Butt Monogrips Ruger SP-101 L11-14833 $17.95 S&W J-Frame Round Butt L11-12277 17.95 K, L-Frame Round Butt L11-12549 17.95 the Hogue HANDALL™ Grip sleeve fits many semi-autos. (F.) HandAll L11-14463 $8.95 the Hogue HANDALL™ Hybrid Grip sleeve (G.) Ruger LCP .380 Auto L11-14477 $9.95 Hogue Rubber AK Pistol Grips (H.) Springfield XD 9mm/.40 L11-14478 9.95 (A.) AK L11-14538 $34.95 (I.) Smith & Wesson M&P 9mm/.40 L11-14479 9.95 Hogue Rubber OverMolded® AK-47/74 Handguard Kits Hogue Bantam Boot Grips (K.) Standard Russian/Chinese Rifles L11-14556 $49.95 (J.) S&W J-Frame Round Butt L11-11054 $17.95 Yugo-Version Rifles w/Longer Guard L11-14558 49.95 K, L-Frame Round Butt L11-11055 17.95 Hogue eXtReMe seRies G-10 1911 Grips Hogue Hex Head 1911 Grip screws (Four-screw set). (B.) For guns w/S&A-style magwells L11-14562 $59.95 Blue L11-15723 $8.99 Hogue Rubber Pistol Grips Stainless L11-15722 8.99 (C.) Beretta 92 (Finger Grooves) L11-16660 $17.95 DeSantis Clip-Grip® his replaces the grips on TS&W J-Frame round butt revolvers. A hook on the right grip panel functions as stop- ping point for the revolver when tucked into your waistband. he ERGO L11-19371 TGrip Delta Grip™ $29.99 is the first truly er- gonomic grip for J Frame revolvers. Designed for the most important part of the gun, the shooter, the Delta Grip was engineered to fit the natural point of aim and mechanics of the human hand, wrist and arm. The result is a grip with a superior natural point of aim, comfort and control. Fits round butt J-Frames. Will not fit on Smith and Wesson Bodyguard 38 Model (sku 103037 and 103038). L11-19684 $19.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com PPoowwddeerr RRiivveerr PPrreecciissiioonn,, IInncc:: 61 PPeerrffeeccttiinngg YYoouurr XXDD//XXDDmm

Powder River Precision x-Treme grips: CNC Laser Cut XDm 9/40 Drop-In Trigger Kit L11-15226 $125.00 360º grip Enhancement for your xD/xDm, made of XDm 45 Drop-In Trigger Kit L11-15236 125.00 high-quality adhesive-backed traction tape. XD 9/40 Drop-In Trigger Kit L11-15228 125.00 X-Treme Grips, XDm 45 (Sand) L11-15229 $16.95 XD 45 Drop-In Trigger Kit L11-15227 125.00 X-Treme Grips, XDm 9/40 (Sand) L11-15230 16.95 XD-S Trigger Spring Kit L11-15237 $19.95 X-Treme Grips, XD 45 (Sand) L11-15231 14.95 Powder River Precision’s Ergonomic Punch Set for the X-Treme Grips, XD 9/40 (Sand) L11-15232 14.95 xD/xDm made of hardened 416 stainless steel with Powder River Precision’s Drop-In Trigger kits for Spring- hard-molded rubber handles designed to fit comfortably field xD Pistols will give you a short, crisp trigger pull in the palm of your hand. with a fast reset and shorten the total trigger pull length. XD/XDm Punch Set L11-15233 $30.00 Apex Tactical Specialties Parts for Smith & Wessons

A. S&W M&P Pistol Sear B. S&W M&P Competition Spring Kit C. S&W M&P Ultimate Striker Block Kit

A. S&W M&P Pistol Sear M&P 9/40 L11-21889 $41.95 M&P 45 L11-21892 41.95 B. S&W M&P Competition Spring kit M&P 9/40 L11-21891 25.95 C. S&W M&P Ultimate Striker Block kit M&P 9/40 L11-21890 35.95 D. Duty/Carry Spring Kit for S&W J-Frame Revolvers E. S&W Revolver D. S&W J-Frame Spring kit L11-14309 25.95 (w/frame-mounted firing pin) Frame-Mounted Firing Pin E. S&W Revolver Firing Pin L11-21888 15.95 TARAN TACTICAL INNOVATIONS

A. B. C.

D. E. F. G.

A. Baseplate/Spring Kit, GLOCK® L11-15375 $41.99 D. Follower, STI Mags. L11-15377 9.95 B. 11-Coil Spring, STI/SVI Mags. L11-15379 8.95 E. Follower, SVI Mags. L11-15378 $9.95 C. Baseplate/Spring Kit, S&W M&P L11-15380 41.99 F. Short Baseplate, GLOCK® L11-15376 29.99 Baseplate/Spring Kit, Springfield XDm L11-15328 41.99 G. 4mm Baseplate, STI/SVI Mags. L11-15382 32.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 62 IDPA’S NEW COMPACT CARRY PISTOL DIVISION “Things Just Got REAL!” By Duane Thomas In Washington State where I reside, for some IDPA has recently introduced a new division reason the full-size, steel frame 1911 .45 auto is a called Compact Carry Pistol (CCP). It’s based on very popular carry gun. I believe it has something Enhanced Service Pistol (ESP) in the sense that it to do with this state’s rich history in the “combat allows things like the various aftermarket trigger pistol” games. I have been told the Renton Fish & systems that are illegal in Stock Service Pistol Game Club is one of the oldest IPSC clubs in the (SSP) but legal in ESP, only the guns must be con- United States. With only single-digit exceptions, siderably smaller. Legal size will be measured by every person I have ever known in Washington placing the gun in the “IDPA box” with a 1/4” State who carried a 1911 daily carried a full-size spacer inserted into the bottom of the box to Government Model. When famous firearms reduce box size. Barrel length may be no more instructor John Farnam taught here several years than 4.1 inches. ago, he com- Basically, they’re mented, “I limiting shooters haven’t seen this to guns the size many cocked of the Glock 19 and locked or smaller. The 1911s in one number of place since the rounds loaded last time I visit- into any maga- ed Gunsite.” zine in CCP is You’re talking eight, the same here to a guy as Custom who’s just come Defensive Pistol off six years car- (CDP). The rying a Glock power floor is 34 concealed 125,000, the on a daily basis same as SSP and The author’s well-worn Glock 17, though it has given him yeoman service (before down- ESP. as a carry gun, would be illegal in Compact Carry Pistol division. sizing to a I was really Glock 17). Dur- glad to see CCP adopt the same trigger system ing that timeframe, I did get a kick out of occa- rules as ESP, instead of the more restrictive rules of sionally running into the people at an IDPA match SSP. I’ve recently been shooting a GlockTriggers who, when they saw me carrying a full-size gun, “The Edge” trigger system in my carry Glock 17, while they were carrying what I call a mid- and I consider it so superior to the stock system, if dleweight (Glock 19, SIG P228, HK P30, etc.), I was carrying a Glock 19 instead of a 17, I guar- wanted to pull this sort of more-tactical-than-thou antee you it would also have The Edge in it. The attitude. You’d think the person carrying the larger advantages there are just too large to ignore. gun would be seen as more serious, but noooo…. I am really amped about this new division. A I remember having a conversation at an IDPA great complaint from certain IDPA shooters over match with a guy who carried an HK P30 in an the years has been that they didn’t like the people inside-the-waistband holster, giving me a hard shooting what they perceived as unrealistically time because I was carrying a Glock 34 in an on- large handguns, instead of “the sorts of guns peo- the-belt holster. “Well,” he said, “I guess it ple really carry.” CCP does away with that argu- depends on what you want to get out of this. I’m ment. You think it’s unfair you have to shoot your doing this with my carry gun and holster.” Like I Glock 19 against a guy armed with a Glock 34? cared more about winning than being “tactical,” I Shoot CCP where the Glock 34 – the Glock 17, for suppose. Because, y’know, that extra 1.3” barrel that matter – is illegal. length of a Glock 34 versus, say, a Glock 19 Having said that, although I like this division a makes ALL the difference. (4.01” G19 versus 5.31” lot, and I predict it will swiftly become the most G34, according to Glock.) My reply was, “I know popular division in IDPA, honestly I do think its what I want to get out of this. I’m getting better basic premise is a bit flawed. In my opinion and with my carry gun. This is my carry gun, and this is experience – and I am well away these are just how I carry it. Y’know, carrying and concealing a my opinions, my experiences – (a) there are actu- full-sized gun is not as hard as those who’ve never ally a lot of serious gunmen and woman carrying done it think it is.” and concealing full-sized guns on a daily basis, Ah, well. I kicked his butt in the final standings, (b) the full-sized guns aren’t as much easier to anyway. Must have been the gun, right? As a mat- shoot than smaller versions of the same design as ter of fact, I think we should just all stay home and a lot of people think. Or in some cases any easi- let the guns shoot the matches, and defend our er, for that matter. lives, because the human element, how much we IDPA’S NEW COMPACT CARRY PISTOL DIVISION “Things Just Got REAL!” 63 practice, how grooved-in we are on our equip- and point and transition and, well, everything for ment, how hard we’ve worked, obviously has me much better. nothing to do with it. The only reason I don’t carry a Glock 19 is that In reality, I can shoot a Glock 19 better than I I have not, historically, had great luck with them can a 17 or 34. I know this because I have taken from a standpoint of long-term durability. I know all three gun types and pitted them against each there are people who will argue with me on that, other shooting the IDPA classifier, on multiple “I’ve got 57 million rounds through my Glock 19 occasions. My performance was pretty much iden- and it still works fine.” I’m happy for you. Serious- tical with the 17 and 34. I was consistently eight ly. But I’ve always figured I had to go to with my seconds faster in my overall, final score with the own experiences. 19. There’s just something about that model Maybe it’s time I give the G19 another shot. It Glock, the way it feels may well be that in my hand, the way Glock was having it balances, the way it quality control prob- points, the way it acts lems in the early/mid- in recoil, that has 2000s when I had the always worked really slide rails delaminate well for me, from a in the frame of my shooting performance Glock 19 carry gun standpoint. after 10,000 rounds, Having said all and every sample that, let’s be realistic. Glock 19 I had them Truth is, there are a send me thereafter – lot more people car- and it was more than rying Glock 19s con- one – wouldn’t work cealed than Glock worth a damn out-of- 34s. CCP gives those the-box. (Of course, folks a venue to com- At one time the Commander (today commonly called the at that time, the then- pete against other Lightweight Commander) was considered “the ultimate current production shooters also armed martial artist’s carry gun.” Today, realistically, that title Glock 17s weren’t with middleweights belongs to the Glock 19. Due to barrel length rules, of the working either, in my (i.e. guns that are two guns in this photo, the G19 would be legal in CCP, the experience.) I was so essentially cut-down Commander would not. soured by my previ- versions of service ous experiences with pistols, like the Glock the Glock 19 I have 19 is basically a cut- pretty much ignored it down Glock 17), for the past 15 years without having to or so, and that may compete against not be fair. other people who Considering I cur- have the perceived rently have over advantage of shoot- 43,000 rounds ing larger, theoreti- through my Glock cally more capable 34, and 25,000-plus weapons, no matter through my Glock how illusory that per- 17, and exactly zip ception may be. reliability/durability From my very first problems with either, exposure to hand- I’d say those earlier Expect to see compact, 3” barreled 1911s, like this Kimber guns, from the time I Ultra CDP II 9mm, have a presence in CCP. problems have been first started handling cured big time. I them, this whole “a longer barrel equals greater, would feel kind of silly switching at this point, or at least more easily attainable, accuracy” given the reliability track record of my larger thing has, on a basic level, never made sense to Glocks, and how well they’re withstanding the me. The first time I ever handled a 6” revolver, I high round count guff, but if the Glock 19 is cur- hated it. It just seemed ungainly, muzzle heavy, rently up to speed...why not? Why not make it you’ve got that huge, heavy tube way out there, my match/carry gun? For one thing, it would the front sight is waving all around. It just allow me to be ever-so-much-more “tactical”. sucked. I find shorter guns, where the weight of And that is SO important. the gun sits further back in your hand, balance Duane’s website is Self-Defense-Handguns.com. DP 64Get your “stuff” together, then keep it that way!

DescriptionDillon Ammunition Stock # Each 10 ea.Boxes Case(qty.) 9mm (50 rd) L11-13784 $1.58 $13.50 $58.00(50) 9mm (100 rd) L11-13645 1.81 15.40 66.00(50) .38/.357 (50 rd) L11-13476 1.79 14.70 63.00(50) .38/.357 (100 rd) L11-13766 2.20 18.80 80.50(50) .44 (50 rd) L11-13568 1.79 15.30 65.50(50) .44 (100 rd) L11-13680 2.92 24.90 106.50(50) .45 ACP (50 rd) L11-13715 1.73 14.70 63.00(50) .45 ACP (100 rd) L11-13574 2.83 24.20 103.50(50) Small Rifle (50 rd) L11-13740 2.05 17.50 75.00(50) Medium Rifle (20 rd) L11-13625 2.05 17.50 120.00(80) Medium Rifle (50 rd) L11-13665 2.90 24.70 106.00(50) Large Rifle (20 rd) L11-13647 2.01 17.20 73.50(50) Large Rifle (50 rd) L11-13231 3.20 27.30 117.00(50) Try a few of Dillon’s heavy-duty, lightweight plastic NOTE: “.38” series cases fit .38 Super, .32-20, .30 Carbine and .30 Mauser; “9mm” se- ries cases fit .30 Luger, 9 x 21 and .380; “.44” series cases fit .41 Mag, .44-40 and .45 ammo boxes. If you’re like us, you’re tired of crumbling Colt; and “.45” series cases fit 10 mm and .40 S&W. “Small rifle” cases fit .222, .223 to 7.62 x 39 length; 20 round “medium rifle” cases fit 7.62 x 39, .22-250 to .30-06 styrofoam and cardboard boxes held together with layers length; 50 round “medium rifle” cases fit .22-250, .308 to .30-30 length; and “large of tape. These boxes are perfect for range or field use. rifle” cases fit .30-06, 8 x 57 length to all belted cartridges. Extra Loading Data Labels, L11-10446, Package of 100, $6.95 Designed to keep out dirt, dust and rain.

kroBins areDillon perfect for reloaders AkroBins who load several calibers, bul- Alet weights, bullet shapes, etc. We’ve been including these bins with our machines for years, and now we’re stocking them in quan- tity for our customers. • The small bins (the ones we use as Square Deal “B” cartridge bins) are 4-3/4" long x 3-7/16" wide x 2-13/16" deep. • The RL 550B/XL650 cartridge bins are 6-3/4" long x 3-7/16" wide x 2-13/16" deep. • The 1050 bins are 10-1/4" long x 4-3/8" wide x 4-3/4" deep. • The double-extra-large bins we use on our SL 900 measure 13- 3/4" long x 6-1/2" wide x 6-3/4" deep (all inside dimensions). AkroBins are made of heavy-duty polypropylene with perma- nent, molded-in color (ours are blue). They’re virtually unbreak- able; unaffected by weak acids and alkalis, and are also water, rust and corrosion proof. Hang ’em, stack ’em, rack ’em and fill ’em – you just can’t beat ’em! Buy several and get your “stuff” together. Description Stock # Each 6 ea. 12 ea. “Square Deal” Bin L11-13756 $2.95 $15.30 $24.84 “RL 550/XL 650” Bin L11-13839 2.95 15.30 24.84 “RL 1050” Bin L11-13484 6.95 34.92 61.92 “SL 900” Bin L11-17125 10.50 56.94 106.92

illon’sDillon Utility boxes Utilityare ideal for all thoseBoxes accessories that Ddon’t quite fit into the compartments of your shooting bag. The large box measures 13-1/2" x 5-3/4" x 2-1/4" and the small box measures 4-5/8" x 6-3/8" x 1-5/8". Use them for cleaning gear, extra magazines, repair parts, first aid supplies, reloading acces- sories and tools – the list is endless. Description Stock # Each 5 ea. Small Utility Box L11-13636 $2.65 $10.95 Large Utility Box L11-17195 5.75 23.95 Berry’s Manufacturing Ammo/Storage Boxes Description Stock # Each 10 ea. 50 ea. .500 S&W (50 rd) L11-19243 $2.98 $22.40 $97.00 Note: .500 S&W Ammo Boxes also fit .223/.243/.308 WSSM Cartridges .454 Casull (50 rd) L11-19244 2.98 22.40 97.00 .45/70 (50 rd) L11-19245 3.29 24.20 105.00 7.62 x 54R (50 rd) L11-19247 3.50 25.50 110.50 .300 Ultra (50 rd) L11-19246 3.50 25.50 110.50 20 Ga. (25 rd) L11-19248 2.24 16.80 72.50 12 Ga. (25 rd) L11-19249 2.24 16.80 72.50 Storage Boxes 4-3/8”x 2”x 1-5/8” L11-19250 $1.12 $8.40 $36.50 4-1/2”x 4-1/2”x 1-5/8” L11-19251 2.32 17.40 75.50 5-1/2”x 2-5/8”x 2-1/2” L11-19252 2.22 16.70 72.00 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 65 Gun-tips® Bore-Whips™ Gun-tips®

ore-Whips™ .17 and .22 caliber (pic- un-tips® Extended Reach Firearm Btured) by Swab-its® are ideal for air GCleaning swabs by Swab-its® revolu- rifles, rimfires or any other .17 or .22 cal- tionize the way you clean your gun. The iber firearm that’s difficult to clean from foam tips are lint free, reusable and ideal for the breach. The foam tips are reusable and cleaning trigger assemblies, slide rails, the handle functions as an empty chamber springs, extractors and anywhere else space indicator. un-tips® foam swabs are reusable and is tight. 24 per package. .17 Cal. L11-12689 $9.99 Greplace cotton swabs. 9-pack L11-12583 $9.99 .22 Cal. L11-12690 9.99 L11-15316 $4.99 TUFF PRODUCTS QUICKSTRIPS UFF QuickStrips are available for a vari- Tety of revolver calibers from .17 HM2 to .500 Linebaugh. $8.50 for a package of 2. .22 LR-Mag./.17HM2-HMR (10 rd.) L11-11737 .32/.327/9mm (8 rd.) L11-11738 he Secure-Mat features a magnetic cor- .38/.357/.40/10mm (5 rd.) L11-11740 Tner that keeps small parts in place when .38/.357/.40/10mm (6 rd.) L11-11741 you field strip your firearm for cleaning. Its .38/.357/.40/10mm (8 rd.) L11-11742 soft, non-slip neoprene construction pro- .41Mag./.45 ACP (6 rd.) L11-11748 tects both your firearm and the work sur- .44 Sp.-Mag./.45 Colt/.460 S&W/ face. It’s ideal for when you’re shooting an .410 Shotshell (6 rd.) L11-11750 out-of-town match and have to clean your .45 Auto Rim (6 rd.) L11-11751 pistol in a motel room! .475/.480/.500 S&W (5 rd.) L11-11755 L11-19398 $27.50 Hubbard RU LO IBER PTIC IGHTS T G F $ 95 O S $ 95 Product 99 49 Development Firearms Lubricant RUGLO’s Tritium/Fiber Optic T.F.0. TBRITE•SITE Handgun Sights use a combi- RUGLO’s Fiber Optic BRITE•SITE Hand- L11-15445 nation of Tritium and Fiber Optic technologies. Tgun Sights use traditional Fiber Optic Most Kimber Models L11-18656 technology. Smith & Wesson M&P L11-18627 Springfield XD L11-11603 $7.99 Once-Fired Cartridge Cases he Kershaw Nerve has 3-D machined G-10 scales Tthat provide a great grip without roughing up your Note: Availability Varies, Please Call First pocket. Jimping on the back of the handle and in the index-finger contour further enhances grip. It’s made of 9mm cases 1000/box L11-21694 $69.95 8CR13MoV stainless steel with CNC-machined G-10 .40 S&W cases 1000/box L11-19204 69.95 .45 ACP cases 1000/box L11-30196 79.95 scales, a liner lock, and a 3-1/8” blade. .223 cases 1000/box L11-10485 89.95 L11-15391 $19.95 66 KEEPYOURGUNS! (Clean) J. Dewey Mfg. Co. ExtremeMIL-COMM Performance Lubricants Cleaning Patches Product is color-coded by Packages of 1000 caliber. White shown here .17 cal. (3/4” Sq.) L11-11807 $12.95 for clarity only. .22-.24 (1-3/8” Sq.) L11-11808 14.95 Packages of 500 ore Snake, the “World’s Fastest Gun .24-.27 (1-3/4” Sq.) L11-11809 $11.95 ™ BBore Cleaner” from Michaels of .30-.35 (2” Sq.) L11-11810 13.95 Oregon is a better way to clean hand- Packages of 250 guns, rifles and shotguns. Originally sold .38-.45 (2-3/4” Sq.) L11-11811 $11.95 as a field tool, this product is popular 12-16 ga. (3” Sq.) L11-11812 13.95 with gunsmiths and benchrest shooters as well. Try one and you’ll be hooked! .22 cal. Pistol L11-10426 $22.95 E-Z Brite .357/.38/9mm L11-10427 22.95 .40 cal. Pistol L11-10428 22.95 W-25B is the choice of leading Wonder Cloth .44/.45 cal. Pistol L11-10429 22.95 Tfirearms manufacturers, armorers, pro .22 cal. Rifle L11-10420 22.95 shooters and gun enthusiasts, and is rec- n gun dealers .243 cal. Rifle L11-10421 22.95 ognized as the world’s best all-purpose Oshelves since .270/7mm Rifle L11-10422 22.95 weapons lubricant/protectant. It is now 1976, this product is .30 cal. Rifle L11-10423 22.95 widely specified by the U.S. military for still a must for keep- .357/.375 cal. Rifle L11-10424 22.95 ing stainless steel .410/.458 L11-10425 22.95 their most critical performance weapons systems. Environmentally safe, non-car- and nickel-finished revolvers look- .50/.54/28 Ga. L11-10432 22.95 ing like new. Demand the original 20 Ga. Shotgun L11-10431 23.95 cinogenic, non-ozone-depleting. lead and carbon wipe! 12 Ga. Shotgun L11-10430 23.95 0.5 Oz. Syringe L11-15732 $10.99 37/40mm Launcher L11-15465 46.95 1.5 Ounces L11-15731 14.50 E-Z Brite Cloth L11-18613 $6.99

nake Oil is a deriva- PRO7™ Gun Clean- weet’s Australian Stive of an FDA certi- M-er is odorless, non- S7.62 Solvent eas- fied medical lubricant toxic and biodegradable. ily removes powder used in high-speed med- “Safely cleans rifles, hand- residue and stub- ical drills. guns, shotguns…, black born copper •Provides a film that powder, corrosive priming fouling. It’s separates and protects deposits and much more.” harmless to moving parts, for 4 oz. L11-10139 $11.95 steel, a non- smoother operation and 8 oz. L11-10138 18.95 acid formula increased efficiency. 32 oz. L11-11298 40.95 with five percent •Contains no evaporants M-PRO7™ Copper ammonia. If you and has a film affinity in Remover works up to four shoot a rifle, you excess of two years. times faster than ammo- ought to try •Reduces the collection nia-based cleaners and is cleaning it with of dirt, dust and other odor free. Sweet’s. contaminants. 4 oz. L11-19370 $11.95 L11-13128 •Performance in extreme conditions M-PRO7™ Synthetic $12.95 is unparalleled. Grease is specifically for- 0.5 oz. Bottle L11-16035 $4.95 mulated to adhere, protect, and 2 oz. Bottle L11-16508 8.95 lubricate metal-on-metal sliding sur- Grease, (2) 4cc Tubes L11-17073 4.95 faces. 0.5 oz. Oil, 4cc Grease L11-10059 5.95 4 oz. L11-16180 $14.95

rogLube is a bio-based Fcleaner, lubricant and preservative (CLP) prod- uct. FrogLube Solvents are designed to quickly attack surface fouling, baked-on or filmed residues and other metallic fouling rian Enos’ Far Superior Slide-Glide is a such as lead and copper, Bdual grease blend, with proprietary while protecting firearms extreme pressure compounds, which boost coatings, paints, wood the ability of the oils in the grease to with- and other materials from stand extreme pressures. It gives the grease a the corrosive effects of very stringy, tenacious character that makes petroleum-based, flam- it stay where you put it. icrolon UltraBlue protects, penetrates mable and toxic weapons Slide-Glide Standard is for use in warm Mand lubricates all surfaces. UltraBlue is care products. weather (F60º+), Lite is a thinner viscosity in use by the US Army Marksmanship Train- 4 Oz. Paste for lower temperatures (F30º+). ing Unit, the US Army Pistol and Rifle Teams L11-15443 $10.99 Slide-Glide Standard L11-15571 $7.95 and the US Marine Corps Pistol and Rifle 4 Oz. Liquid Slide-Glide Lite L11-15572 7.95 Teams. L11-75125 $9.95 L11-15444 $17.59 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com J. Dewey Manufacturing Company67 .243 Caliber Rifle L11-16280 L11-22091 .270 Caliber Rifle L11-16274 L11-22085 .30 Caliber–7.62mm Rifle L11-16273 L11-22084 .35 Caliber Rifle L11-16281 L11-22092 .44–.45 Caliber Rifle L11-16279 L11-22090 .22 Caliber Pistol L11-16282 L11-22093 .38 Caliber –9mm Pistol L11-16275 L11-22086 .40–.41 Caliber –10mm Pistol L11-16276 L11-22087 .44–.45 Caliber Pistol L11-16277 L11-22088 Cotton Mops .22–.27 Caliber (ea.) L11-17089 $1.60 .30–.38 Caliber (ea.) L11-17090 1.60 .400–.450 Caliber (ea.) L11-17091 1.60 16, 12 & 10 Ga. Shotgun (ea.) L11-17094 1.60 M-16/AR-15 Breech Rod Guide/Chamber Brush Breech Rod Guide L11-10149 $20.00 DEWEY Nylon Coated Cleaning Rods AR-15 Chamber Cleaning Brush L11-11299 2.95 All Caliber Pistol 6" L11-15461 $19.95 Deluxe M-16/AR-15 Lug Recess Cleaning Kit (.22-.26 Jag Adapter for All Caliber 6" rod) L11-19894 3.25 Lug Recess Cleaning Kit L11-18533 $27.95 (.27 & up Adapter for All Caliber 6" rod) L11-19895 3.25 Includes: Chamber Cleaning Rod, Lug Recess Cleaning .22-.26 Caliber Pistol 12" L11-12985 23.95 Head, Delrin Guide Sleeve, 50-pak Cotton Cleaning .17 Caliber Rifle 26” L11-11472 22.95 Rolls, Chamber Brush, Chamber Mop, Double-Ended .17 Caliber Rifle 36” L11-11473 25.95 Nylon Cleaning Brush. .22-.26 Caliber Rifle 36" L11-13084 26.95 Bolt Action Rifle Cleaning Rod Guides .22-.26 Caliber Rifle 44" L11-15462 25.95 All models fit .695-.700 bolt diameter rifles. .27 Caliber and up Pistol 12" L11-13021 23.95 .17-.222, .225, .22/250, .220 Swift L11-14196 $18.95 .27 Caliber and up Rifle 36" L11-12991 24.95 .243 Caliber – 7mm L11-14197 18.95 .27 Caliber and up Rifle 44" L11-15463 25.95 .30 Caliber L11-14198 18.95 .35 Caliber and up Rifle 36" L11-17096 29.95 .338 Caliber L11-14199 18.95 .35 Caliber and up Rifle 44" L11-17097 29.95 Muzzle Guards Shotgun Rod (Uncoated Brass) L11-10473 24.95 AR-15/M-16 L11-16875 $10.95 2-pc Shotgun Rod L11-15464 29.95 M1-A/M-14 L11-16876 10.95 Brass Jags (Note: These jags ONLy fit Dewey Cleaning Rods!) M1 Garand L11-16878 10.95 .22 Caliber Brass Jag L11-10026 $2.75 Ruger 10-22 Standard Bbl. L11-16877 10.95 .24 Caliber Brass Jag L11-10027 2.75 Ruger 10-22 Bull Barrel L11-16879 10.95 .27 Caliber Brass Jag L11-10025 2.75 Ruger Mini-14 L11-16880 10.95 .30 Caliber (and up) Brass Jag L11-10867 2.75 Brass Muzzle Guard, .30 Cal. L11-17245 10.95 .38 – .41 Cal. Brass Jag L11-10028 2.75 Nylon Gun Parts Cleaning Brush .44 – .45 Cal. Brass Jag L11-10243 2.75 Parts cleaning brush L11-16389 $2.25 Brass Patch Loop Accepts most pistol and rifle patches L11-10737 $2.25 ewey’s AR-Link Cleaning Pin .17 Caliber Bore Brushes Dutilizes the rear take-down .17 Caliber Rifle/Nylon (ea.) L11-11475 $1.95 pin in your AR-15 style rifle to .17 Caliber Rifle/Bronze (ea.) L11-11474 1.95 hold the upper and lower receivers Nylon Bore Brushes .22 Caliber Rifle (ea.) L11-16144 $1.30 open for cleaning. It fits AR-15s .243 Caliber Rifle (ea.) L11-16145 1.30 and AR-10s with take-down pins .270 Caliber Rifle (ea.) L11-16146 1.30 up to .316” in diameter. To use, 1) .30 Caliber Rifle (ea.) L11-16147 1.30 Depress the rear take-down pin and pull out. 2) Pivot the upper .22 Caliber Pistol (ea.) L11-16302 1.30 and lower receivers apart. 3) Insert the pin on the AR-Link into the .38 Caliber Pistol (ea.) L11-16148 1.30 upper receiver take-down pin tab. 4) Close receivers with the AR- .40 Caliber Pistol (ea.) L11-16149 1.30 .45 Caliber Pistol (ea.) L11-16150 1.30 Link inserted into the lower receiver. 5) Push the take-down pin Bronze Bore Brushes Each/$1.50 5 pack/$5.50 through the channel in the AR-Link to lock the upper and lower .22 Caliber Rifle L11-16278 L11-22089 receivers into place. 6) Clean your rifle. 7) To remove AR-Link, .25 Caliber Rifle L11-16293 L11-22094 reverse the above steps. L11-18599 $14.95 Bore-tips® Bore Cleaning Foam Swabs drymate ™

o s#!+, there I was…in my office, cation of solvents and oils. They work Ncleaning my 686 SSR when the with all standard 8-32 thread cleaning boss walks in with that “whisky-tango- rods, and are tough and reuseable. foxtrot” look on his face. “Hi,” I said .22/5.56mm (6 ea.) L11-15310 $4.98 (thinking fast), “I’m trying out these .243/6mm (6 ea.) L11-15311 4.98 Bore-tips before I write the Blue Press .30/7.62mm (6 ea.) L11-15312 4.98 he drymate™ Gun Cleaning Pad protects copy for them. They work GREAT!” .357/9mm (6 ea.) L11-15313 4.98 Tyour table and firearms from scratches The Bore-tips Swabs REALLY DO .40/10mm (5 ea.) L11-15314 4.98 and spilled cleaning fluids. Machine wash- work. What you can’t see under the .45 Caliber (5 ea.) L11-15315 4.98 able, durable, stain resistant and long lasting. foam is a plastic jag sized for a tight bore 12 Gauge (3 ea.) L11-15325 8.98 Gun Cleaning Pad™ L11-11313 $19.95 fit which provides for the uniform appli- 20 Gauge (3 ea.) L11-15326 8.98 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 68 WilsonWilson CombatCombat

A. B. C. D. E. F.

G. I.

H.

ilson Combat’s NEW Elite Tactical Magazine HD +P – “The D. Match Magazine (7 rd) .45ACP L11-10505 $32.95 WETM Heavy Duty/+P rated.45 ACP magazines with exclusive E. WIL-ROG Mag (8 rd) .45ACP L11-11714 32.95 stainless flatwire MAX magazine spring and time-tested ETM tube.” F. Officers Match Mag. (7 rd) .45ACP L11-10506 32.95 A. (8 rd) .45ACP L11-18602 $44.95 SHOk-BUFF® Recoil System – Includes a One Piece Guide Rod and Elite Tactical Magazine – “The ETM started with a blank sheet of Plug; six SHOK-BUFF buffers; an Extra Power Firing Pin Spring; an paper and 30-plus years of 1911 and 1911-magazine experience; Extra Power Recoil Spring; and a Reduced Power Recoil Spring. designed from the ground up as a premium tactical magazine.” G. SHOK-BUFF System L11-18150 $37.05 B. ETM (8 rd) .45ACP L11-12027 $34.95 Wilson SHOk-BUFF® – A 1/10” thick poly fiber buffer between the C. ETM (10 rd) 9mm L11-19463 $34.95 frame and slide contact areas. Wilson Combat Magazines – “No other .45 magazine on the market H. SHOK-BUFF Kit (2 buffers, 18.5# recoil spring) Gov’t Model can compare for proven inherent reliability, durability and the ability L11-18148 $5.95 to remain fully loaded for long periods of time without damage.” I. SHOK-BUFF Buffer only (6 ea.) L11-18147 $6.95 WOLFF GUNSPRINGS Cz 75B 16 Pound L11-19343 7.98 Wolff RECOIL SPRINgS 9 Pound L11-19348 $7.98 17 Pound (Standard) L11-19344 7.98 BROWNINg HI-POWER 10 Pound L11-19349 7.98 SPRINgFIELD 5” 45 xD 18.5 Pound L11-11373 $7.25 11 Pound L11-19350 7.98 14 Pound L11-19345 $7.98 COLT gOvERNMENT MODEL 12 Pound L11-19351 7.98 16 Pound L11-19346 7.98 9 Pound L11-11719 $7.25 13 Pound L11-19352 7.98 18 Pound L11-19347 7.98 10 Pound L11-12193 7.25 14 Pound (Standard) L11-19353 7.98 SPRINgFIELD 4.5” 9/40 xDM 12 Pound L11-12007 7.25 SMITH & WESSON M&P 14 Pound L11-19336 $7.98 13 Pound L11-12443 7.25 12 Pound L11-19356 $7.98 16 Pound L11-19337 7.98 14 Pound L11-12338 7.25 14 Pound L11-19357 7.98 18 Pound (Standard) L11-19338 7.98 16 Pound (Standard) L11-11860 7.25 15 Pound L11-19358 7.98 Wolff gUIDE RODS 17 Pound L11-12192 7.25 16 Pound (Standard) L11-19359 7.98 Smith & Wesson M&P L11-19354 $24.95 18.5 Pound L11-12465 7.25 SPRINgFIELD 5” 9/40 xD Springfield XDM 4.5 L11-19355 24.95 20 Pound L11-12056 7.25 12 Pound L11-19339 $7.98 Wolff HAMMER SPRINgS 23 Pound L11-11377 7.25 13 Pound L11-19340 7.98 1911 L11-11511 $9.00 COLT OFFICERS MODEL 14 Pound L11-19341 7.98 Wolff MAg CATCH SPRINgS 24 Pound L11-12110 $7.25 15 Pound L11-19342 7.98 1911 L11-11791 $9.95 SPRINGFIELD Magazines Chip McCormick Corp’s

Springfield Factory xD & xDM Magazines “Shooting Star” 16-Rd. xD 9mm L11-11586 $31.95 12-Rd. xD .40 L11-11587 31.95 Magazines 13-Rd. xD/xDM .45 Designed to give the serious pis- L11-11585 32.95 tol shooter the advantage of extra 19-Rd. xDM 9mm L11-15496 36.95 shot capacity and improved per- 7-Rd. xD-S 9mm L11-19681 28.95 formance. Floorplate drilled to 9-Rd. xD-S 9mm L11-19680 39.95 accept base pads. 16-Rd. xDM .40 L11-19971 36.95 .45 ACP SS Mag., 8-Rd. 5-Rd. xD-S .45 L11-15234 28.95 L11-10311 $22.95 7-Rd. xD-S .45 L11-15235 39.95 .45 ACP SS Mag., 10-Rd. Two-Piece 1911 Recoil Spring guide Rod – L11-15025 $25.95 Machined from stainless steel, includes plug and Allen wrench. L11-15724 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com CHECK-MATE 1911 Magazines69

.45 8-Rd. w/2 pads L11-27047 $24.95 Base Pad 9mm 9-Rd. .38 Super 10-Rd. .40 S&W 9-Rd. 10mm 9-Rd. .45 8-Rd. Comp. w/Screws .45 10-Rd. L11-27043 L11-27044 L11-27046 L11-27045 L11-27049 L11-18045 L11-27039 $24.95 $24.95 $24.95 $24.95 $24.95 $2.50 $31.95 Evolution Gun Works hese two-piece flat checkered main- Tspring housings with bolt-on mag wells are similar to the patented one- piece S&A design. The mag well and checkered mainspring housing are machined from solid bar stock steel and can be used without the mag well attached, although there will be a small alifornia Competition Works’ Magazine Storage Sleeves make dovetail below (this does not impair Cit easy to organize your pistol magazines. The optional I.D. function). This is a great replacement for Tag/Hanger makes it less likely that you’ll show up at a match with plastic mainspring housings on full-size the WRONG magazines! or commander model 1911s. Four-Magazine Storage Sleeve L11-19226 $14.95 Stainless L11-18600 $49.99 Six-Magazine Storage Sleeve L11-19227 17.95 Blued L11-18601 49.99 Magazine Sleeve I.D. Tag/Hanger L11-19476 1.95 Adjustable Target Sight for 1911s

his Adjustable Target Pistol Sight is precision machined and fits ecure Firearms Products’ Universal Spring Tester will help Tin a standard “Bomar slide cut.” Yeah, the services of a gun- Syou determine if the recoil spring in your pistol needs smith are required to cut the slide (unless your 1911 pistol already replacing, and you’ll save time and money by testing and has a Bomar cut) but the results are worth it. organizing loose recoil springs in your shooting bag. Adjustable Pistol Sight L11-18210 $53.95 Recoil Spring Tester L11-15305 $39.95

AGPUL 1911 Grip MPanels feature rein- forced polymer construc- tion and a unique diamond-shaped cross sec- tion to prevent twisting in the hand. They also have an aggressive mag-release cut out and are compatible with ambidextrous safeties. FDE L11-43237 $19.95 BLK L11-43236 19.95 ODG L11-43238 19.95

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 70 CHECK-MATE M14/M1A Magazines urrently Check-Mate Industries is the largest CM14/M1A magazine manufacturer for the United States Military. Check-Mate Industries is rec- ognized as being America’s number one manufac- turer of M14 magazines. We offer CMI M14/M1A magazines in 5-, 20- and 25-round capacity. 5-round M14, Phosphate Finish L11-27055 $22.00 20-round M14, Polished-Stainless Finish L11-27056 $28.00 20-round M14, Phosphate Finish (NSN#: 1005- 00-628-9048 Gov’t: 7790183) L11-27057 $27.00 25-round M14, Phosphate Finish (The same Mil- Spec magazines Check-Mate is now supplying to the US Military.) L11-27048 $35.95 Mec-Gar ProMag Pistol Magazines Beretta 92 18-rd. AFC* L11-18728 $25.95 Beretta 92 20-rd. AFC* L11-18729 29.95 Beretta 96 .40 15-rd. AFC* L11-14992 29.95 Browning HP 15-rd. Blue L11-18730 25.95 Browning HP 20-rd. Blue L11-18731 29.95 1911 11-rd. Blue L11-18732 24.95 Para P-14 14-rd. Blue L11-18733 23.95 Para P-16 15-rd. Blue L11-18734 23.95 Para P-18 17-rd. Blue L11-18735 23.95 Ruger P-Series 9mm 17-rd. Blue L11-18736 25.95 Ruger P-Series 9mm 20-rd. Blue L11-18737 29.95 S&W 59 17-rd. Blue L11-18738 25.95 S&W 59 20-rd. Blue L11-18739 29.95 SIG Sauer 226 18-rd. AFC* L11-18740 25.95 hese magazines are American made and feature a life- SIG Sauer 226 .40 15-rd. AFC* L11-15020 29.95 time manufacturers-defect warranty from ProMag. SIG Sauer 228 15-rd. Blue L11-18741 25.95 T Springfield XD (not XDM) 9mm 18-rd. L11-14988 23.99 Polymer 32-rd. 9mm AR-15 L11-12638 $19.95 Springfield XD (not XDM) .40 13-rd. AFC* L11-14991 29.95 Polymer 30-rd. Mini-14 L11-12631 19.95 Taurus 92-99 17-rd. Blue L11-18742 25.95 Polymer 30-rd. AK-47 (7.62) L11-12669 17.95 Taurus 92-99 20-rd. Blue L11-18743 29.95 Polymer 30-rd. AK (.223) L11-12674 17.95 CZ-75B 19-rd. AFC* L11-14989 29.95 Polymer 30-rd. AK-74 (5.45) L11-12675 17.95 *AFC = Anti-Friction Coating Kel-Tec P-32 Pistol (.32 ACP) L11-12620 19.95

-Products 30-Round alu- AGPUL 30-Round poly- uger’s BX-25 magazine for Cminum M-16/AR-15 maga- Mmer PMAG GEN M2 M- ew steel 30-round AK-47 Rthe 10-22. zine. 16/AR-15 magazines. Nmagazine from Bulgaria. L11-17915 $29.95 L11-15593 $19.95 L11-12644 $14.95 L11-12022 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com ElZetta 71 Tactical Flashlight Mounts ZFH1500 Flashlight very Elzetta ZFH1500 Flashlight Mount for AR15 rifles Eand ZSM Tactical Shotgun Flashlight Mount comes with Mount for AR15s sizing adapters, giving the mount the ability to accommo- date flashlights from 0.7 to 1.05 inches (18 to 27 mm) in diameter. This includes flashlights from popular manufac- turers such as InForce®, Streamlight®, Pelican®, Laser De- vices®, SureFire® and of course, the Elzetta® ZFL-M60. (Sizing Adapters are not required when using an Elzetta ZFL-M60 or other 1-inch lights.) The Elzetta ZSM is made from the same advanced glass-filled polymer that has proven itself in the popular Elzetta ZFH1500. The NEW Elzetta ZRX Tactical Flashlight Mount is made for flashlights with standard one-inch bodies and will accommodate a range from 0.94 to 1.04 inches (23.8 ZSM Tactical Shotgun to 26.4 mm). This includes many popular tactical flash- Flashlight Mount lights including the Elzetta ZFL-M60. The Elzetta ZRX clamping rings are made from Mil-Spec Type III Hard An- odized aluminum, the body is a glass-reinforced polymer and the hardware is steel. The ZRX weighs 1.1oz (32g). ZFH1500 AR15 Flashlight Mount L11-12020 $29.95 ZRX Tactical ZSM Tactical Shotgun Mount L11-18050 39.95 ZRX Tactical Flashlight Mount L11-15487 35.00 Flashlight Mount A.

PROTEKTORThe Original Leather Sandbag* MODEL Rifle Rests ll Protektor Model leather bags are Amade with the best top grain cowhide available. The welded steel rest is strong enough to stand on and won’t break if dropped (Owl Ear Front Bag sold separately). A. Front Bag L11-10880 $19.95 B. B. Rifle Rest L11-10883 49.95 C. Std. Front Bag L11-10881 22.95 C. D. Rear Bag L11-10882 26.95 D. *Sand not included. The Dillon Shooting Mat ARGET TSPORTS® TACTICAL

illon’s shooting mat is made of tough ballistic-weave Dnylon fabric, with a large skid-resistant elbow pad his three-piece shooting bag set is an incredible value area. The “ground” side is moisture resistant and wipes Tfor the money! The bags are made of durable, water- clean easily. The padding is dense, closed-cell foam to resistant 600 denier polyester and provide a steady and provide both shooter comfort and a stable shooting solid shooting system for long guns and handguns. I base. The mat is equipped with a shoulder strap, a filled the ones in the photo with walnut tumbling media carry handle and two straps with snap-release buck- and found them to be easy to fill and much lighter to les. Dimensions: 66” x 27.75” carry than when filled with sand. L11-18146 $65.00 L11-15384 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 72 TARAN TACTICAL INNOVATIONS MAGPUL MAGLINK™

L11-43240 he TTI Magazine Extension for MagPul AR-15 5.56 PMAGs is $17.95 constructed of machined aluminum. T L11-15770 $39.99 FOR MAGPUL MAGS ONLY MAGPUL QD SLING SWIVEL

he TTI Benelli Extended AccuGuide Carrier is the first extended Tcarrier ever manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat- treated and polished, providing optimal performance. The Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and com- L11-43239 fort of not having your thumb torn up after reloading. Compatible with: Benelli M1/M2/M3/SBE, Versamax. L11-15769 $79.99 $14.95 TACCOM, LLC Mag Extensions

A. B.

ACCOM Five-Round Magazine Extensions for MagPul Gen 3 TPMAG 40-round 5.56 magazines and current M3 Generation (20- and 25-round) 7.62 PMAGS are designed to fit and function without modification. Previous-generation 20-round 7.62 maga- agna-Matic’s Carbon Removal Tools quickly remove carbon zines can be modified to work with the extension. The 5.56 exten- Mfrom your rifle with ease and precision. sion will also work with PMAG 30-, 20-, and 10-round magazines, CRT-15 (AR15/M16) L11-11705 $49.95 but will not lock in place (instructions for use included). CRT-25 (AR10/SR25) L11-29025 49.95 A. 5-Round 7.62 Extension L11-19542 $24.95 CRT-14 (M1A/M14) L11-29823 41.99 B. 5-Round 5.56 Extension L11-19541 18.95 M-16/AR-15 BUTTSTOCK CLEANING KIT Adjustable M1/M1A Gas Systems ll Schuster Mfg. Inc. adjustable gas plugs are made in the U.S.A. uffer Technologies’ Recoil Buffer™ re- A Bduces felt recoil and increases muzzle from hardened tool steel, Parkerized control. Easy installation. n “MIL-SPEC Speak,” this is a KIT, and feature a lifetime factory warranty. Beretta 92 L11-18539 $24.95 ICLEANING, BUTT STOCK M16A2 RIFLE, By adjusting the volume of gas, you (Includes buffer and guide rod.) which contains: ROD, CLEANING, SMALL change the speed of the op rod and Browning HP L11-18540 9.95 CETME L11-18541 19.95 ARMS: M11E3; CASE, SMALL ARMS ACCES- the barrel harmonics. If you’re work- CZ 75 L11-18542 9.95 SORIES; BRUSH, CLEANINGSMALLARMS; ing up your own handloads, a quarter of a turn WILL affect your group size. FN FAL L11-18543 14.95 BRUSH, CLEANINGSMALLARMS: BORE; GLOCK (pictured) L11-18545 9.95 BRUSH, CLEANINGSMALLARMS: CHAMBER; Includes instructions and the adjust- HK 91 L11-18544 19.95 AND BOTTLE ASSEMBLY LSA 5 OZ. It just ment tool (Allen wrench). Ruger 10/22 L11-10526 9.95 doesn’t get much more MIL-SPEC M1A (Pictured) L11-15405 $59.00 Ruger Mini-14 L11-10525 14.95 than that. SOCOM M1A L11-15409 59.00 SIG 220/226 L11-19123 24.95 L11-15383 $14.99 M1 Garand L11-15408 40.00 S&W Model 41 L11-18486 9.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com ® 73™

MAGPULEnhancedUNFAIR Enhanced ADVANTAGE Trigger “Battery Assist Self-Leveling Guard, Aluminum Device” for AR-15/M16 AR-15/M16 AR-15/M16 Mag Follower

he MagPul® Enhanced Trig- eveloped from the experi- Tger Guard™ is a black Dence of the MagPul® anodized aluminum drop-in Team, the B.A.D. Lever™ is replacement for the AR15/M16 designed to improve the speed weapons platform. It features a and efficiency of the AR-15/M- AGPUL’s Enhanced Self Lev- shallow "V" shape for better use 16 by enabling the shooter to Meling Follower is a drop-in of gloves in tactical shooting or manipulate the bolt catch with- AGPUL 30-Round polymer replacement for USGI 30-round cold weather operations. It’s non- out moving away from the MPMAG GEN M2 M-16/AR- magazines. Features a four-way folding and has rounded edges. ready position. 15 magazines. anti-tilt design. Aluminum Trigger Guard MagPul B.A.D. Lever L11-12644 $14.95 3-Pk. L11-12606 $6.95 L11-12611 $19.95 L11-27058 $29.95 GRSC CQB Slings, Sling Mounts and Front Swivels

A. B. C. D. he GSRC CQB Sling was designed as a mission-specific sling for CAR-15 Ambidextrous CQB Sling Mount without slots (pictured TCQB operations. It attaches only at the rear of the firearm and al- mounted on rifle above) L11-19170 $14.95 lows the operator to quickly transition to a handgun if necessary. C. A2-Style AR-15 CQB Right-Hand-Only Sling Mount A. CQB Sling With Quick-Release Hook L11-19172 $39.95 L11-19168 $34.95 CQB Sling Without Hook (not pictured) L11-19173 $24.95 D. Remington 870 Shotgun Ambidextrous CQB Sling Mount B. CAR-15 Ambidextrous CQB Sling Mount with slots L11-19169 $24.95 L11-18968 $14.95 Viking Tactics V-TAC MK1 Sling iking Tactics’ V-TAC MK1 Sling is quick, instantly Vadjustable to improve your shooting position, allows shooting from weak-side shoulder, secures the carbine during handgun transitions, and allows hands-free movement in diffi- cult surroundings. Viking Tactics Sling for CAR-15 L11-11961 $34.95 Viking Tactics Sling for FN-FAL/HK-91 L11-11962 40.00 M-14 Bolt Roller Greaser AR-15 Charging Handle

ewey’s AR-Link Cleaning Pin utilizes Dthe rear take-down pin in your AR-15 style rifle to hold the upper and lower receivers open for cleaning. It fits AR-15s o THAT’s how you grease that little and AR-10s with take-down pins up to S.O.B. (Slick-Operating Bolt, that is.) .316” in diameter. S M-14/M1A Bolt Roller Greaser L11-18599 $14.95 L11-18531 $6.75 L11-19550 $19.99 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 74J. Dewey Manufacturing Company AR Gas Tubes

J. Dewey AR Gas Tube, Short L11-15795 $9.95 AR Gas Tube, Mid-Length L11-15796 11.95 J. Dewey AR Gas Tube, Long L11-15800 9.95 ODIN Works XMR Emergency AR(epair) Kit Crucial Parts for Your AR-15 EXTENDED MAGAzINE RELEASE FOR AR-15S Tac Latch DIN Works EXTENDED MAG- OAZINE RELEASE allows you to rapidly change mags without disrupt- ing your shoot- ing position. The XMR features an ergonomic design that is four times larger than factory magazine buttons and is con- toured for positive depression and reduced slip. Anodized in your choice of matte black he Specialized Dynamics AR-15 Emer- he Badger Ordnance Tac Latch makes it (pictured), ODIN green, red or tan. Tgency Repair Kit includes: three gas Tmuch easier for you to operate the latch Black XMR L11-11996 $19.95 rings, extractor spring, firing pin retaining on your AR-15/AR-10 charging handle. It Green XMR L11-11998 19.95 pin, buffer retaining pin/spring, hammer/ works especially well for “flat-top” rifles Red XMR L11-11997 19.95 trigger pin, take down detent and spring. equipped with low-mounted optics. Tan XMR L11-11999 20.95 L11-19460 $19.95 L11-10379 $18.95 Jerry Miculek AR-15 Compensator TTacticalRUG SightsLO A. AR15 B. C. Tritium/Fiber Optic -Accessories’ AR-15/M-16 Brass De- TCflectors are CMP/NRA approved for Front Sight service-rifle competition. Now you can pile erry Miculek’s three-chamber AR-15 your spent brass at your feet instead of wast- JCompensator fits threaded-barrel rifles ing time hunting it down. and may be “clocked” for left- or right- L11-18626 $69.95 A. Standard AR-15 L11-12541 $19.95 handed shooters. Used by many top three- B. Flat-top L11-12542 19.95 gun competitors. C. Removable Carry Handle L11-11328 $49.95 L11-12543 19.95 KNS Precision, Inc. AccuWedge AR-15 he AccuWedge fits between Tthe upper and lower re- Extractor Upgrade ceiver on your AR-15, remov- ing excess movement. AccuWedge L11-19122 $4.95

erma-Pin Firing Pin Retainer for M-16 Pand AR-15 replaces the standard cotter pin found in the bolt carrier to retain the fir- he AR-15 Extractor Upgrade increases ing pin (as in original Stoner rifles). Made of Tthe tension on the extractor, pushing it tool steel. No modification to gun required. deeper into the cartridge extractor groove. L11-19927 $9.00 L11-19121 $12.95 75

JP Enterprises, Inc.JP Adjustable Tactical Performance Gear Gas System JPGS-2FS JP A2 Front Sight w/Gas Valve JP Compensator L11-12591 $129.95 JPTRE-2 1/2” x 28 TPI JPGS-2B w/Quick Custom Stainless Bolt Carrier w/Exit Hole for .223 Detach Rail JPFBC-3 SP Low Mass, JP AR Speed Hammer Matte Black Finish L11-12592 Stainless Finish JPSH-1A Low Mass Hammer L11-12614 $89.95 $89.95 L11-12584 $225.95 L11-12617 $59.95 JP Reduced Power AR Spring Set L11-12618 JP Enhanced $10.95 JP Custom Rifle Operating Spring Reliability, JP Recoil Eliminator Reduced JPS-OSR Rifle JPRE-2 1/2” x 28 TPI JPFC-1 .154 Small Pin Fire Control Power AR L11-12587 $19.95 Kit w/CD-ROM Instructional Video Spring Set Carbine Operating Spring Standard Version for AR15/M16 L11-12616 $119.95 L11-12590 JPS-OSC Carbine Matte Black Finish $10.95 L11-12594 $19.95 L11-12615 $99.95

JP Enterprises (Competition Only) Low Mass Buffer JP Enterprises .223 JP EnhancedBolt™ Assembly JPLMB JPEB-223 SAE3910 Construction L11-12585 $59.95 L11-12586 $124.95 POF-USA AR-15/M-16 Parts Smith Enterprise, Inc. Vortex® Flash Eliminators Combat Proven in & Trigger System, Incl. KNS Pins Afghanistan AR-15 Lower Parts Kit L11-19386 $199.99 L11-25364 $65.00

Enhanced Roller Cam Pin Upgrade Finger Placement Includes Gas Key Trigger System, Incl. KNS Pins .308 Vortex Flash Eliminator .223 Vortex Flash Eliminator L11-25363 $45.00 L11-19387 $229.99 L11-19683 $85.00 L11-19682 $65.00 76

C-M OSYSTEMSRE RTS STS

Railway Tactical Sight Colt Scout Sight

C-More Systems RTS Sight features a built in Picatinny/ Polymer 8 MOA Black L11-16511 $259.00 Weaver style rail mount. Aluminum 4 MOA Black L11-14612 309.00 RTS 3.5 MOA, Black L11-14518 $419.00 C-More Systems Tactical Sight features an A-2 Style rear RTS 7 MOA, Black L11-14563 419.00 aperture sight and mounts to flat-top AR-15s C-More Systems STS Sight is the smallest C-More made Aluminum 6 MOA Black L11-11444 $444.00 and many specialized mounting options are available. Polymer 6 MOA Black L11-11605 399.95 STS 3.5 MOA, Black L11-14345 $399.00 C-More Systems Colt Scout Sight STS 7 MOA, Black L11-14346 399.00 Aluminum 4 MOA Black L11-16808 $368.00 STS Mount, Large Glock L11-14367 39.99 Replacement Modules for Railway/Scout/Tactical Sights STS Mount, Small Glock L11-14372 39.99 2 MOA Dot Module, Polymer L11-14620 $49.00 STS Weaver/Picatinny Mount L11-14373 47.99 STS 30mm Scope Tube Mount L11-14379 47.99 2 MOA Dot Module, Aluminum L11-14643 49.00 STS 1” Scope Tube Mount L11-14474 47.99 4 MOA Dot Module, Polymer L11-16415 49.00 CR2032 Lithium STS/RTS Battery L11-14721 5.00 4 MOA Dot Module, Aluminum L11-14691 49.00 C-More Systems Railway Sight 6 MOA Dot Module, Polymer L11-16416 49.00 Polymer 8 MOA Black L11-16413 $249.00 6 MOA Dot Module, Aluminum L11-14696 49.00 Aluminum 8 MOA Black L11-14611 299.00 8 MOA Dot Module, Polymer L11-14717 49.00 C-More Systems Tactical Railway Sight features a built-in 8 MOA Dot Module, Aluminum L11-14720 49.00 spacer to co-witness with sights on flat-top AR-15s Railway/Scout/Tactical Battery L11-17034 4.00 SPECIALIZED DYNAMICS Armorers Upper Receiver Block

he Specialized Dynamics AR15/AR10 Armorers etc. One block fits AR15s and ArmaLite and DPMS plat- TUpper Receiver Block is made from billet aluminum form AR10s. (Sorry, the upper receiver pictured above is and holds your upper receiver securely in order to make NOT included.) it easier to install barrels, free-float tubes, muzzle devices, L11-43234 $59.99 TARGET SPORTS® TACTICAL AR-15 Super Tool L11-19549 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Bushnell Trophy TRS-25 77 Ultra Compact Red Dot Sight

ushnell’s Trophy TRS-25 Ultra Compact Red Dot Sight is designed for Buse on shotguns, handguns and rifles. It is constructed and assem- bled by highly skilled craftsmen to Bushnell’s high quality standards. The precision and craftsmanship with which this scope was built ensures its performance under demanding conditions. This scope will provide the shooting accuracy and repeatability which have made Bushnell leg- endary. Features unlimited eye relief and a three-minute of angle dot. TRS-25 L11-11643 $89.95 Scout Scope Mounts for AK, SKS Rifles cout Scope Mounts provide an extremely stable optics base for your AK, Saiga or SKS rifle and will not shift, vibrate loose or Sorry, the optic S change point of impact as the rifle heats up. Rock solid and easy to pictured here is NOT install, the two-piece design enables the removal and replacement included with the of your optics without losing zero. Scout Scope Mount. Scout Scope Mounts easily allow for complete DISASSEMBLY of your rifle for cleaning and maintenance while retaining zero. These rifles are designed so that carbon build-up can easily be cleaned from the gas tube and piston. This is routine maintenance, necessary in order to maintain a properly functioning rifle. Other mounts for AK-and SKS-style rifles make this difficult, time consuming and then require that optics be re-zeroed. Scout Scope Mount for AK Rifle L11-25374 $79.99 Scout Scope Mount for SKS Rifle L11-25373 78.99 Evolution Gun Works Picatinny Rail Scope Mounts $3999

Available in Standard Elevation or Plus-20 Minutes of Angle Remington Model 700 Short Action L11-19975 Savage Long Action RB L11-19981 Remington Model 700 Short Action + 20 MOA L11-19976 Savage Long Action RB + 20 MOA L11-19982 Remington Model 700 Long Action L11-19977 Winchester Model 70 STD L11-19983 Remington Model 700 Long Action + 20 MOA L11-19978 Winchester Model 70 STD + 20 MOA L11-19984 Savage Short Action RB L11-19979 Winchester Model 70 Short Action L11-19985 Savage Short Action RB + 20 MOA L11-19980 Winchester Model 70 Short Action + 20 MOA L11-19986 Tactical Winchester Twist Leg Bi-Pod inchester’s Twist Sports WLeg Bi-Pod is compact, 45°-Offset light- weight, easily at- Auxillary taches to your Optics rifle’s sling swivel Mount stud, and twist of the wrist is – quite literally – all it takes to switch from features twist lock legs Ayour long-range optic to a CQB red-dot sight with Tactical for unshakeable prone and Sports’ 45-degree Offset Auxillary Optics Mount! Fits most Picatin- bench shooting. Legs adjust from ny rails. (Pictured with Bushnell’s TRS-25, which is NOT included!) 7.5” to 11.75” height. 45° Offset Optic Mount L11-14472 $14.99 L11-19671 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included        PRINTED ON 4/7/2011

REVISIONS NOTES: SYM DESCRIPTION DATE APPROVAL

1. APPLICABLE STANDARDS/SPECIFICATIONS: A. DOD-STD-00100D (AR)  B. ASME Y14.5M - 1994  78

The Wilson 7.62 40 WT, Part 2   X

               

 

           

The above drawing of the 7.62x40 Wilson Tactical cartridge is available for download on Wilson Combat’s website, www.wilsoncombat.com/new/762x40WT-cartridge-case.pdf. ORIGINAL DATE OF DRAWING PART NO.      MECHANICAL DO NOT SCALE DRAWING  PROPERTIES 04-07-11 UNLESS OTHERWISE SPECIFIED 2234 CR 719, BERRYVILLE, AR 72616            DIMENSIONS ARE IN INCHES         By Mark Pixler and Tim Richards YP ing dies for theDRAFTSMAN 7.62x40,CHECKER and just about any other            YS TOLERANCE ON: ANGLES ± .5° IW              EL2 .XX ±.01 ENGR ENGR DECIMALS: .XXX ±.005          Now that I’m a born-again AR fan, sittingRA on cartridge you can imagine! 7.62x40WT Cartridge Case           ENGR ENGR BH THIRD ANGLE PROJECTION         the front pew in the Amen corner of the 7.62x40 With the help of our engineering department,            NEXT ASSY USED ON SIZE CAGE CODE DRAWING NO. REV.            WT congregation, I’m here to preach theRH gospel of Tim and I plan to set up an old RL 1050 to process   APPLICATION C OWSZ3 this not-really-all-that-new cartridge. In Part One, I a bulk quantity of brass for theSCALE project.10/1 TASK SHEET 1 OF 1 mentioned that Wilson Combat introduced the According to the data Wilson Combat has pub- cartridge in 2011 and their website credits Kurt lished on its site, Accurate 1680 appears to be Buchert for the early 7.62x40 development work. THE powder for this particular cartridge. The folks In short, I think it’s one hell of a cartridge that at Western Powders sent me a pound of 1680 to punches WELL above its weight, and my thanks to try, and Tim has purchased an eight-pound con- both Mr. Buchert and Mr. Wilson for giving me a tainer of military surplus 680 – a powder with sim- reason to love the AR! ilar burn-rate characteristics. To me, the really “Good News” about the Tim is experimenting with various projectiles 7.62x40 is that the parent case – the 5.56x45 weighing from 150 to 180 grains in his quest to NATO – is both comparatively cheap and readily make IPSC/3-Gun major power factor, while I’m available. Making cases amounts to trimming the focusing on 110-grain projectiles – Hornady 110- 5.56 case to 1.560” and then re-sizing it to .30 grain V-MAX® projectiles to be exact. Using the caliber. There are any number of ways to accom- data on the Wilson Combat website, it should be plish this, but the simplest one, according to Bill easy to come up with a load starting at 2269 fps Wilson, is to use a 2” Mini Bench Top Cut-Off Saw (with a maximum of about 2534 fps) using the 110 (available for about $33 at your local Harbor grainers and Accurate 1680. Since I’m not looking Freight store) to make the initial cut, then run the to make any particular power factor, the most ac- case through the Hornady size die custom made curate load I can find within that velocity range for Wilson Combat. The tapered expander on the will work just fine. Hornady die opens up the case in one operation. The folks at Wilson Combat sent me some of Once sized, the overall case length should be their factory loads with 125-grain Sierra Pro- 1.565” and if necessary, final trimming can be Hunter, Speer TNT, and Nosler Ballistic Tip projec- done with any case trimmer. tiles. We fired all three loads over Tim’s My preferred method for making the case, nat- chronograph and found that Wilson’s listed veloci- urally, is going to include the Dillon Rapid Trim ties were – shall we say – conservative. 1500 Case Trimmer. As of yet, Dillon isn’t tooled For example, the Sierra Pro-Hunter load was up to make trim dies for the 7.62x40, but the folks listed on the box to be 2350 fps out of a 16” bar- at CH4D make trim dies designed to work with rel. Over Tim’s chrono, five shots averaged 2474 our Case Trimmer. Dave, the owner, was nice fps out of the 16” barrel on the rifle Wilson Com- enough to send trim dies to use for our project. In bat sent me for testing, with the fastest being 2496 addition, CH4D makes a file trim die and reload- and the slowest being 2438 fps. The Wilson 7.62 40 WT, Part 2 79 X

Having heard the reports that a .300 AAC Black- out cartridge can fit in a “Making a case for the 7.62x40 WT.” (1.) Start with a 5.56x45 chamber, we once-fired 5.56x45 NATO cartridge case (left), (2.) “There’s no replacement tried it with the 7.62x40 trim it to length in a size/trim die, (3.) expand the for displacement.” A and it’s a “no-go.” The neck, (4.) charge with powder and seat a projectile. comparison of the case- dent in the projectile (5.) Once the cartridge has been fired, it fireforms to capacity potential (arrow above) is the the rifle chamber (note that the shoulder is a bit more between the 7.62x40 WT result of our attempts. well-defined in the cartridge case to the right) and will (left) and the .300 AAC The bolt would NOT hold approximately one more grain of propellant. Blackout. close. The Speer TNT load was similar in that the Hunter and the 125-grain Sierra Pro Hunter. Any listed velocity on the box was 2400 fps out of a of these three bullets perform admirably on deer 16” barrel and the average for five shots was 2491 and hogs under 150 pounds or so, but we recom- fps, and the extremes were 2411 and 2524 fps re- mend the 110-grain Barnes TTSX for large hogs. spectively. The 110-grain Sierra HP is a great bullet in the Finally, the Nosler Ballistic Tip load was listed 7.62x40 WT for varmints and predators, and has on the box at 2350 fps out of a 16” barrel and five proven to be one of the most accurate bullets.” shots over the chrono averaged 2443 fps, with Tim has been working on load development 2437 and 2452 fps on each end. using the following propellants: Accurate LT-32, My guess is that either the chronographs were 1680, 2200, 2230 and 5744; Hodgdon 4198; and calibrated differently, or the elevation/tempera- surplus 680 from Thunderbird Cartridge Company, ture/barometric pressure differences between Inc. (TCCI, www.tbirdammo.com). Projectiles in- Arkansas and Arizona are significant enough to clude Hornady’s 110-grain V-MAX, 150-grain account for the differences. I will say that the FMJBT; Remington’s 150-grain and 180-grain primers were just a bit flat on the rounds we fired. Core-Lokt; and Sierra’s 168-grain MatchKing. Wilson has chosen to offer factory loads with Primers include Wolf, Remington No. 6-1/2, Sell- and reloading data for 110- or 125-grain projec- ier & Bellot, and CCI 450 Small Rifle Magnum. tiles, however Tim was able to obtain some data By projectile, Tim’s results for highest average from Western Powders that included supersonic velocities achieved per load are summarized as fol- loads for 110-, 125-, 150- and 168-grain projec- lows (sorry, we can’t list powder-charge weights): tiles. There is also data available for subsonic Hornady 110-grain V-MAX loads with 210-, 220- and 230-grain projectiles, Accurate 2200 – 2259 fps but you’ll need the typical 1:8” twist common Accurate 5744 – 2440 fps, 2486 fps, 2565 fps with .300 AAC Blackout barrels to utilize that (compressed load, no pressure signs w/CCI 450 data. Wilson Combat’s 7.62x40 barrels have either primers) a 1:12” or 1:11” twist (depending on the manufac- Hornady 150-grain FMJBT turer) in order to stabilize supersonic projectiles. Accurate LT-32 – 1976 fps (compressed load, As to the effectiveness of the cartridge as a low pressure) hunting round, the following statement is posted Accurate 1680 – 2242 fps*, 2321 fps* (*flat on the Wilson Combat website: “A LOT of Texas primers, some cratering), 2342 fps (no pressure feral hogs, whitetail deer and predators lost their signs w/CCI 450 primers) lives testing the terminal performance of this car- Accurate 2200 – 1934 fps, 2004 fps, 2078 fps tridge! The 7.62x40 WT has proven to be a VERY (mild loads), 2114 fps, 2176 fps (standard efficient killer on medium-sized game with the primers, no pressure signs), 2231 fps (S&B 110-grain Barnes TTSX, 125-grain Nosler Ballistic primers) 80 TCCI 680 – 2267 fps (no pressure signs w/CCI 450 primers) Remington 150-grain Core-Lokt TCCI 680 – 2202 fps (no pressure signs w/CCI 450 primers) Sierra 168-grain MatchKing AA1680 – 1910 fps, 1971 fps (normal primer), 2011 fps, 2085 fps (very compressed load) AA2200 – 1934 fps, 2004 fps, 2078 fps (mild loads) Remington 180-grain Core-Lokt AA1680 – 1977 fps (no pressure signs w/CCI 450 primers) Has Tim “made major?” Nope. But he’s not quite ready to give up. Stay tuned. CH Tool & Die/4D Custom Die (CH4D) P.O. Box 889 • 711 N. Sandusky St. Note the tapered Mt. Vernon, OH 43050 expander. Phone: 740-397-7214 • Fax: 740-397-6600 www.Ch4d.com Hornady® P.O. Box 1848 • Grand Island, NE 68802 Wilson Combat has Hornady manufacture Custom Phone: 308-382-1390 • Fax: 308-382-5761 Series New Dimension™ Dies for their 7.62x40 WT cartridge, and we have a limited number of sets avail- www.hornady.com able, Part # L11-00300, for $79.95. Wilson Combat’s Western Powders, Inc. 7.62x40 WT Cartridge Case Gage (inset), Part # P.O. Box 158 • Miles City, MT 59301 L11-00301, is also available for $32.95. Phone: 406-234-0422 Accurate 2230 – 1882 fps, 1908 fps (mild loads) www.westernpowders.com Accurate 5744 – 2147 fps, 2249 fps, 2329 fps* Wilson Combat® & Scattergun Technologies™ (*blown out primers), 2238 fps, 2282 fps (no 2452 CR 719 • Berryville, AR 72616 pressure signs w/CCI 450 primers) To Order: 1-800-955-4856 Hodgdon 4198 – 2100 fps (compressed load, nor- Technical Questions: 1-870-545-3618 mal pressure), 2152 fps (very compressed load) www.wilsoncombat.com DP

® HOGUELaser Enhanced (LE) Grips XTECH ant immediate gains in your TACTICAL Wconfidence when han- ADJUSTABLE TACTICAL GRIP dling your 1911? Follow the red dot! Hogue's new laser- enhanced grip for your clas- sic 1911 will dramatically NEW! improve your accuracy and speed in any defensive or competitive scenario. Designed, engineered and hand-made in America, proudly wear- 17° Angle 25° Angle 33° Angle ing the Hogue name, your new LE Grip will hen XTech Tactical’s design team set out to make almost every Wcreate the most comfortable AR15 grip they kind of shooter – looked at it from every angle. The resulting ATG including you – bet- (Adjustable Tactical Grip) is the new standard for ter and faster. Peri- comfort in the industry. Not only does its shape od. Also available contribute to comfort, so does its position. The for J-Frame Smith & team studied the firearms market for standout grips Wesson revolvers. both outside and within the AR platform. HOGUE LE 1911 Grip, Black L11-43243 $189.95 XTECH ATG AR-15 Grip, Black L11-01045 $19.99 HOGUE LE J-Frame S&W Grip, Blk. L11-43244 189.95 XTECH ATG AR-15 Grip, FDE L11-01046 19.99 81

SquareNew Deal B Toolhead FromStand Super 1050/RL 1050Dillon: Short Trim Die Toolhead

olds your or short rifle cartridges like thick to facilitate the correct HSDB tool- Fthe .300 Blackout, you case length. This specialty head, powder must use a Short Trim Die toolhead enables you to cor- measure, dies Toolhead when using a Dillon rectly trim and prepare short and caliber Rapid Trim 1500 Case Trimmer rifle cases on your 1050. conversion during case preparation. Oth- (NOTE: the 1050 toolhead components erwise, the toolhead is too stand is not included.) (not included) in an orderly manner.

L11-62225 L11-62219 $24.95 $224.95

“Competition Reloading With Brian Enos” Evolution Gun Works ompetition CReloading with Brian Enos guides you Chamber Checkers through a complete step-by-step reloading process for IPSC, Steel Challenge and NRA Bianchi Cup style shooting. Using a Dil- lon Precision XL 650 reloader with CP brass and CP bullets, Enos demonstrates proper peed up the round-checking Cowboy Chamber Checker Sprocess when you’re getting (.357 Mag.,.44 Mag., .44-40, reloading techniques ready for a match! EGW uses .45 Colt) L11-25375 $19.95 for the most popular actual Clymer chamber reamers Rifle Chamber Checkers loads used by the top to produce its chamber checkers. .223 Rem.L11-25377 $29.95 shooters. Enos is, of Pistol Chamber Checker 5.56x45 L11-25376 29.95 course, a champion 9mm L11-19846 $19.95 .308 Win. L11-18964 39.95 himself, winner of the .38 Super L11-19847 19.95 .30-06 L11-19675 45.00 Masters Competition, the NRA Bianchi Cup and a top con- .40 S&W L11-19848 19.95 Shotgun Chamber Checker 10mm L11-19676 20.00 12 Ga. L11-19523 $49.99 tender in the USPSA for many years. Run time: 80 minutes. .45 ACP L11-19849 19.95 20 Ga. L11-19524 49.99 L11-14341 $19.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 82 All Your Dillon-Video Favorites, NOW AVAILABLE On DVD!

“Firestorm in the Desert (Machine Gun Magic)” – Dillon’s own “Shooter Ready?” – Top quality instruction with all the video portraying the history and excitement of the machine gun excitement of a major motion picture. 30 min. hobby. 60+ min. VHS format L11-13361 $15.95 “Machine Gun Magic” DVD format L11-18312 $14.95 “Shooter Ready?” DVD format L11-18313 $14.95 “The Memphis Belle”/“The Fight for the Sky” “P51 Mustang”/“Corsair” Two-DVD Set L11-18320 $24.95 Two-DVD Set L11-18321 $24.95 SAVE $9.95 – Buy Both Air War DVD Sets L11-18319 $39.95

Lyman’s AR The Complete Reloading Hand- Reloading Manual book – Featuring for… loads for your AR Pretty much anything chambered in popu- you’re likely to be lar cartridges from loading! That’s right, the .204 Ruger to all the data published the .50 Beowulf. by the various bullet L11-10976 $12.99 and powder manufac- turers for YOUR favorite cartridge. $9.95 each gun-guides Lyman’s Pistol and Handgun-Cartridge Manuals Complete guides for all Revolver Reloading .32 H&R Magnum L11-15361 models of Ruger .22 pistols, 10/22 rifles Handbook (Third .380 ACP L11-15362 and Mini-14s; and dis-/reassembly guides Edition) – The 9mm L11-15363 for other popular firearms. World’s Leading .38 ACP L11-15365 The Complete guide $11.99 each Handgun Reloading .38 Special L11-15364 Ruger .22 Pistols L11-40035 Manual. .357 Magnum L11-15366 Ruger 10/22 Rifle L11-40036 L11-18967 $21.95 10mm/.40 S&W L11-15367 Ruger Mini-14 L11-40037 .44 Special L11-15368 Dis-/Reassembly Only $6.99 each .44 Magnum L11-15369 1911 Pistols L11-40045 .45 ACP L11-15370 AK-47 L11-40038 .45 Colt L11-15371 Browning Buckmark L11-40039 Lyman 49th Rifle-Cartridge Manuals Colt AR-15 L11-40040 Edition .223 L11-15349 GLOCK Pistols L11-40041 Reloading Hand- .22-250 L11-15348 M1 Carbine L11-40042 book – Featuring .243 L11-15350 M1 Garand L11-40043 More Loads, the .270 L11-15351 Mauser Rifles L11-40044 Newest Compo- 7mm-08 L11-15352 Mosin-Nagant Rifles L11-40046 nents, Most Manu- 7mm Remington Magnum L11-15353 Mossberg 500 Shotguns L11-40047 facturers, and More 7.62 x 39 L11-15359 Remington 870 Shotguns L11-40048 Load Data than Ever! .30 M1 L11-15354 Remington 1100 Shotguns L11-40049 L11-10330 $24.95 .30-30 L11-15355 Ruger Mk III Series .22 Pistols L11-40050 .308 L11-15356 Ruger Single-Action Revolvers L11-40051 .30-06 L11-15357 SKS Rifles L11-40052 Lyman Shotshell Re- .300 Winchester Magnum L11-15358 S&W M&P/Shield Pistols L11-43230 loading Handbook, .45-70 L11-15360 5th Edition – The 1903 Springfield Rifles L11-40061 Number One Shot- Springfield XD & XDM Pistols L11-40053 Reloading guides – Winchester 1300 Shotguns L11-40054 shell Loading Man- These guides are com- ual. piled from the most L11-12846 $25.95 Traveler’s guide to the recent data available Firearm Laws of the Fifty from all the major pow- States – The myriad of der and bullet manufac- firearm laws facing the turers.The convenient gun owner of the early binding allows the guide 21st Century can be intim- to lie open and flat on Speer Reloading idating when traveling. your bench. Manual, Rifle & L11-30201 $9.95 $12.99 each. Pistol (Number 14) Revolver Guide L11-40010 – The ultimate load- Practical Shooting: Beyond .45Colt/.454/.460/.475/.480/.500 L11-40060 ing guide for shoot- Fundamentals – The keys to Pistol Guide L11-40009 ers who are using consistent, high-speed .223/.22-250 Guide L11-11762 Speer projectiles. shooting are within you .243/.270 Guide L11-40081 L11-12580 $29.95 right now. This book will .308/.30-06 Guide L11-12209 show you ways to bring .300 Win, Short, Ultra Mag L11-12210 them out. 7mm-08/7mm Rem, Ultra Mag L11-12211 L11-10750 $19.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Wise Company’s “Grab & Go” Emergency Food Kits83

e prepared for any emergency with Wise Company’s 72 Hour ise Company’s 60 Serving Gourmet Entrée Only “Grab BEmergency Entrée Kit. Each kit includes four servings per Wand Go” Food Kit includes two servings per day (entrées day (total of 12 servings) of 20 ounce lunch and dinner entrées only) for one adult for one month or four adults for one week. Prod- shown in the following schedule: Day 1: Two 10-ounce servings of uct within this Bucket Cheesy Lasagna and Beef cook-in-the-pouch entrée; and two 10- is: Savory Stroganoff (8 ounce servings of Pasta Alfredo with Chicken cook-in-the-pouch en- servings), Chili Maca- trée. Day 2: Two 10-ounce servings of Noodles and Beef in Savory roni (8 servings), Pasta Mushroom Sauce cook-in-the-pouch entrée; and two 10-ounce Alfredo (8 servings), servings of Teriyaki Chicken Creamy Pasta and Veg- and Rice cook-in-the-pouch etable Rotini (8 serv- entrée. Day 3: Two 10-ounce ings), Cheesy Lasagna servings of Chili Macaroni with (4 servings), Teriyaki Beef cook-in-the-pouch entrée; and Rice (8 servings), and two 10-ounce servings of Creamy Ala King and Creamy Pasta and Vegetable Rice (8 servings), and Rotini with Chicken cook-in- $37.95 Creamy Tomato Basil $119.95 the-pouch entrée. L11-15296 Soup (8 servings). L11-15297

ise Company’s 60 Serving Gourmet Freeze Dried Meat ise Company’s 120 Serving Breakfast Only “Grab & W“Grab & Go” Food Kit includes 60 servings of assorted WGo” Food Kit includes 120 servings of breakfast assort- gourmet-seasoned freeze dried meat and a 20-serving bonus of ment (no en- long-term emergency rice, for a total of 80 servings. Product trées). Product within this Bucket within this is: Roasted Chicken Bucket (12 servings), Teriyaki is: Apple Cin- Style Chicken (8 serv- namon Cereal ings), Cheesy Beef (8 (40 Servings), servings), Southwest Crunchy Gra- Style Chicken (12 serv- nola (40 Serv- ings), Savory Roasted ings), and Ground Beef (12 serv- Brown Sugar ings), Stroganoff Style and Maple Beef (8 servings), and Multi-Grain Long-Term Instant Rice $129.99 (40 Servings). $199.00 (20 servings). L11-15299 L11-15303

ise Company’s 120 Serving Freeze Dried Vegetable ise Company’s 120 Serving Freeze Dried Fruit and Wand Sauce “Grab & Go” Food Kit includes 120 servings WSnack “Grab & Go” Food Kit includes 120 servings of of vegetable and fruit and snack assort- sauce assortment. ment. Product within Product within this this Bucket is: Ba- Bucket is: Corn (24 nanas (16 servings), servings), Peas (16 Strawberries (16 serv- servings), Broccoli (24 ings), Peaches (16 servings), Green servings), Apples (16 Beans (24 servings), servings), Caramel Butter Sauce (8 serv- Sauce (16 servings), ings), Cream Sauce (8 Yogurt (16 servings), servings), Cheese and Pudding (16 Sauce (8 servings), Servings). and Mushroom Sauce (8 Servings). $134.99 $144.99 L11-15302 L11-15300

n-Target Productions, Ltd. videos are “AK-47” 40090 $19.95 “Ruger Mk. 2” 40091 19.95 Odesigned to educate enthusiasts about “AR-15” 40087 19.95 “Ruger Mk. 3” 40097 19.95 the selection, proper use, cleaning, disas- “AR-15 Maint. & Mods” 40099 24.99 “Ruger 10/22” 40088 19.95 sembly/reassembly, and accessorizing of “Scratch Building an AR-15” 40101 19.95 “Ruger Mini-14” 40096 19.95 firearms. On-Target Productions’ videos are “1911” 40086 19.95 “SKS” 40093 19.95 100 percent digital quality, focused on the “GLOCK” 40083 19.95 “S&W M&P” 40084 19.95 details and are entertaining and educational. “M1 Carbine” 40095 19.95 “S&W Revolvers” 40100 19.95 Every video features clear, close-up photog- “M1 Garand” 40094 19.95 “Sig Sauer P226” 40098 19.95 raphy to enhance the instructional narrative “Mossberg 500” 40092 19.95 “Springfield Armory XD” 40085 19.95 from start to finish. “Remington 870” 40089 19.95 All videos are DVD format. Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included

COMPETITIVE EDGE DYNAMICS85

CED M2 Chronograph CED7000 Timer L11-17926 $199.00 L11-19208 $119.95

M2 Chronograph Accessories he M2 Chronograph comes with sensors, screens and Infrared Chronograph Upgrade Kit L11-12116 $89.00 Tone two-foot mounting bracket. A nylon carrying case Rechargeable Batt. Pack for Above L11-12117 48.00 and tripod are available options. The CED7000 Shot Nylon Carrying Case L11-18145 35.95 Timer is a breakthrough in technology. No other timer to Tripod L11-18126 39.95 date offers this combination of advanced features, com- 2-Ft. Skyscreen Mounting Bracket L11-18120 14.95 pact size and light weight. This is the “next generation” Replacement Skyscreens L11-18124 21.95 Shot Timer here today! Comes with a rechargeable battery Replacement M2 Sensor L11-18877 36.95 with low-battery LCD indicator and a universal charger. Cavalry Arms Medical Trauma Kits obody likes to think about it, but should a serious Nhunting/shooting accident occur, chances are the drugstore “first aid kit” you have stashed under the seat of your truck won’t do much good. That’s why Cavalry Arms Medical has produced trauma kits designed by Armed Forces medics. The Cavalry Arms Medical P.T.K. (Personal Trauma Kit) contains a 15-gram package of Celox granules to control serious bleeding, Nitrile gloves, a high-intensity Chem- Light, a six-inch Emergency Bandage with a second pad, and a 4.5-inch Kerlix Roll. The A.T.K. (Advanced Trauma Kit) contains one 15- gram package of Celox granules, Nitrile gloves, a CPR Face Barrier, two VioNex Anti-Microbial Wipes, a high- intensity Chem-Light, two 4-inch Emergency Bandages, one 4.5-inch Kerlix Roll, two 2-inch Kerlix Rolls, one 3- inch Elastic Bandage, and two 5 x 9-inch sterile Abdomi- nal Pads. All contents of both kits are currently in use by Personal Trauma Kit (P.T.K.) L11-19220 $34.95 real-world combat medics. Advanced Trauma Kit (A.T.K.) L11-19322 69.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 86 D-TERMINATOR D-TERMINATORElectronicElectronic ScaleScale Lyman Powder Pal

Funnel Pan L11-18399 $5.95

$139.95 L11-10483

• 900 grain/57 gram capacity • Accurate to 0.1 grain/0.01 gram • Uses four AA batteries (included) • Comes with its own AC adapter • Scale check weight included Scale Cover L11-18387 $14.95 (See Page 52 for additional scale check weight sets.) (Note: Only fits current scale.) All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. DILLON’S ‘ELIMINATOR’ SCALE

$69.95 L11-13480 87 D&L PAID PRSRT STD PRSRT U.S. Postage Dillon Precision Sports S&W The D&L fixed rear sight fits all modern S&W revolvers with three factory threaded screw holes in the top strap.The front sight has to be Sight filed to achieve an exact zero. L11-00558 $75.00 XTECH TACTICAL ADJUSTABLE TACTICAL GRIP

See Page 80 Smith Enterprise, Inc. Vortex® The BLUE PRESS Dillon Precision Products, Inc. Way 8009 E. Dillon’s AZ 85260-1809 Scottsdale, Flash Eliminators See Page 75 Lone Wolf Distributors Threaded Barrels for GLOCKs Scan QR Code

101 See Page 58 Classic Firearms California L11-40133 Competition $29.95 Autographed Works L11-97130 Magwells $34.95 for GLOCKs See Page 59

HOGUE DILLON PHONE NUMBERS Laser Enhanced Orders/Expert Assistance: 800-223-4570 For orders and technical assistance. (LE) Grips Order Status/Basic Orders: 800-762-3845 Order by stock numbers only for 1911s & S&W (no technical questions please); or to quickly check the status of your order. Catalog Request: 800-762-3844 J-Frame Revolvers To order The Blue Press catalog. See Page 80 Dillon Showroom Hours: M-F, 9a-6p; Sat., 8a-3p