DOCSLIB.ORG

Smoking Vehicles FAQ's

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Smoking Vehicles FAQ's Possible causes of Engine Vehicle Smoke may include clogged air filters, oil leaks, and using the wrong grades of fuel. Common Causes of Gasoline Engine Vehicle Smoke Visible Signs Diagnosis Possible Causes The San Joaquin Black or Gray Smoke Incomplete fuel Clogged air filter combustion Carburetor, choke, fuel injection, or emission system Valley Air Pollution malfunction Iginition timing off Blocked manifold Control District is Blue Smoke Engine oil being burned Oil leaking into combustion chamber committed to Worn piston rings, valves, or cylinders Leaking exhaust manifold ensuring that all Head gasket failure White Smoke Coolant and/or water Head gasket leaking residents of the San vaporized in combustion Cracked block or cylinder head Common Causes of Diesel Engine Vehicle Smoke Joaquin Valley have Visible Signs Diagnosis Possible Causes Black or Gray Smoke Incomplete fuel Clogged air filter clear air to breathe. Lets Clear the Air! combustion Wrong grade of fuel Incorrect timing Engine overheating Faulty injection system Blue Smoke Engine oil being burned Worn piston rings, valves, or cylinders or atomized Engine oil level too high White Smoke Fuel is not burning Faulty injection system www.valleyair.org Incorrect timing Engine overheating Lets Clear the Air! CA Motor Vehicle Code Diesel Engines Should Not Smoke Emissions from motor vehicles are a major Smoking vehicles are a nuisance and against Diesel engines will emit some smoke when source of air pollution, threatening our health, the law. All vehicles that emit excessive they first start out or are under load, but they economy, and quality of life. smoke, including those with diesel engines, should not smoke constantly nor when are in violation of Sections 27153 and 27153.1 operating at cruising speed on a level road. It is estimated that a poorly maintained vehicle of the California Motor Vehicle Code. As such, When a vehicle smokes excessively, it needs emits up to 25 times more pollutants than they can be cited by local law enforcement. to be examined by a mechanic and repaired. allowed by emissions standards. If you suspect your vehicle emits excessive An indication of this is excessive tailpipe smoke, you can make specific adjustments or smoke. repairs to correct the situation. Here are some ways you can help clear the air: When a vehicle smokes excessively, it Reduce Vehicle Idling needs to be examined Excessive vehicle idling releases carbon by a mechanic and Call monoxide and other pollutants into the air. repaired. 1-800-55-99-AIR Carbon monoxide is a toxic gas that poses or #SMOG to report a special health risks to sensitive individuals— Follow Owners Manuals smoking vehicle. especially those with heart ailments. A vehicle owner’s manual will recommend the option grade of gasoline to use, proper gear Report Smoking Vehicles shifting methods, and other ways to keep The Valley Air District has a voluntary Smoking engines running at maximum environmental Vehicle Program that allows residents to and economic efficiency. anonymously report smoking vehicles seen on Valley roads. Worn plugs waste gas When a vehicle is seen with visible exhaust for and lower engine For additional information, contact the San more than 10 seconds, call the Air District’s performance. Joaquin Valley Air Pollution Control District regional office nearest you: hotline. Jot down the license plate number, car Keep Engines Well-Tuned make and model, date, and the location of Northern Region where the vehicle was seen. Dirty carburetors, clogged air filters, and worn parts and plugs waste gas and lower engine (San Joaquin, Stanislaus and Merced Counties) Call 1-800-55-99-AIR to report a smoking performance and contribute increased 4230 Kiernan Ave., #130, Modesto, CA 95356-9321 (209) 557-6400 • FAX: (209) 557-6475 vehicle. emissions of particulate matter and nitrogen oxides— two major contributors to air pollution Call #SMOG free-of-charge for AT&T Central Region in the San Joaquin Valley. Wireless, Cellular One, and Via Wireless (Madera, Fresno and Kings Counties) cellular telephone customers. Cooperate with the Smog Check Program 1990 E. Gettysburg Ave., Fresno, CA 93726-0244 (559) 230-5950 • FAX: (559) 230-6062 The owner of the smoking vehicle will be State law requires an inspection of all vehicles’ notified by mail and encouraged to make emission control equipment every two years. Southern Region Smog Checks and making necessary repairs repairs to the vehicle. (Tulare and Kern Counties) comply with the law and reduce air pollution. 2700 M St., #275, Bakersfield, CA 93301-2370 Join the thousands of San Joaquin Valley Remember— emission systems of exempt (661) 326-6900 • FAX: (661) 326-6985 residents who are looking for smoking vehicles vehicles are required by law, and the removal and doing their part for clearer air! of any smog equipment is illegal. www.valleyair.org.
Load more

Recommended publications
  • Converting an Internal Combustion Engine Vehicle to an Electric Vehicle
    AC 2011-1048: CONVERTING AN INTERNAL COMBUSTION ENGINE VEHICLE TO AN ELECTRIC VEHICLE Ali Eydgahi, Eastern Michigan University Dr. Eydgahi is an Associate Dean of the College of Technology, Coordinator of PhD in Technology program, and Professor of Engineering Technology at the Eastern Michigan University. Since 1986 and prior to joining Eastern Michigan University, he has been with the State University of New York, Oak- land University, Wayne County Community College, Wayne State University, and University of Maryland Eastern Shore. Dr. Eydgahi has received a number of awards including the Dow outstanding Young Fac- ulty Award from American Society for Engineering Education in 1990, the Silver Medal for outstanding contribution from International Conference on Automation in 1995, UNESCO Short-term Fellowship in 1996, and three faculty merit awards from the State University of New York. He is a senior member of IEEE and SME, and a member of ASEE. He is currently serving as Secretary/Treasurer of the ECE Division of ASEE and has served as a regional and chapter chairman of ASEE, SME, and IEEE, as an ASEE Campus Representative, as a Faculty Advisor for National Society of Black Engineers Chapter, as a Counselor for IEEE Student Branch, and as a session chair and a member of scientific and international committees for many international conferences. Dr. Eydgahi has been an active reviewer for a number of IEEE and ASEE and other reputedly international journals and conferences. He has published more than hundred papers in refereed international and national journals and conference proceedings such as ASEE and IEEE. Mr. Edward Lee Long IV, University of Maryland, Eastern Shore Edward Lee Long IV graduated from he University of Maryland Eastern Shore in 2010, with a Bachelors of Science in Engineering.
    [Show full text]
  • Wildland Firefighter Smoke Exposure
    ❑ United States Department of Agriculture Wildland Firefighter Smoke Exposure EST SERVIC FOR E Forest National Technology & 1351 1803 October 2013 D E E P R A U RTMENT OF AGRICULT Service Development Program 5100—Fire Management Wildland Firefighter Smoke Exposure By George Broyles Fire Project Leader Information contained in this document has been developed for the guidance of employees of the U.S. Department of Agriculture (USDA) Forest Service, its contractors, and cooperating Federal and State agencies. The USDA Forest Service assumes no responsibility for the interpretation or use of this information by other than its own employees. The use of trade, firm, or corporation names is for the information and convenience of the reader. Such use does not constitute an official evaluation, conclusion, recommendation, endorsement, or approval of any product or service to the exclusion of others that may be suitable. The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination, write USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C.
    [Show full text]
  • Physics 170 - Thermodynamic Lecture 40
    Physics 170 - Thermodynamic Lecture 40 ! The second law of thermodynamic 1 The Second Law of Thermodynamics and Entropy There are several diferent forms of the second law of thermodynamics: ! 1. In a thermal cycle, heat energy cannot be completely transformed into mechanical work. ! 2. It is impossible to construct an operational perpetual-motion machine. ! 3. It’s impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body ! 4. Heat flows naturally from a hot object to a cold object; heat will not flow spontaneously from a cold object to a hot object. ! ! Heat Engines and Thermal Pumps A heat engine converts heat energy into work. According to the second law of thermodynamics, however, it cannot convert *all* of the heat energy supplied to it into work. Basic heat engine: hot reservoir, cold reservoir, and a machine to convert heat energy into work. Heat Engines and Thermal Pumps 4 Heat Engines and Thermal Pumps This is a simplified diagram of a heat engine, along with its thermal cycle. Heat Engines and Thermal Pumps An important quantity characterizing a heat engine is the net work it does when going through an entire cycle. Heat Engines and Thermal Pumps Heat Engines and Thermal Pumps Thermal efciency of a heat engine: ! ! ! ! ! ! From the first law, it follows: Heat Engines and Thermal Pumps Yet another restatement of the second law of thermodynamics: No cyclic heat engine can convert its heat input completely to work. Heat Engines and Thermal Pumps A thermal pump is the opposite of a heat engine: it transfers heat energy from a cold reservoir to a hot one.
    [Show full text]
  • Internal and External Combustion Engine Classifications: Gasoline
    Internal and External Combustion Engine Classifications: Gasoline and diesel engine classifications: A gasoline (Petrol) engine or spark ignition (SI) burns gasoline, and the fuel is metered into the intake manifold. Spark plug ignites the fuel. A diesel engine or (compression ignition Cl) bums diesel oil, and the fuel is injected right into the engine combustion chamber. When fuel is injected into the cylinder, it self ignites and bums. Preparation of fuel air mixture (gasoline engine): * High calorific value: (Benzene (Gasoline) 40000 kJ/kg, Diesel 45000 kJ/kg). * Air-fuel ratio: A chemically correct air-fuel ratio is called stoichiometric mixture. It is an ideal ratio of around 14.7:1 (14.7 parts of air to 1 part fuel by weight). Under steady-state engine condition, this ratio of air to fuel would assure that all of the fuel will blend with all of the air and be burned completely. A lean fuel mixture containing a lot of air compared to fuel, will give better fuel economy and fewer exhaust emissions (i.e. 17:1). A rich fuel mixture: with a larger percentage of fuel, improves engine power and cold engine starting (i.e. 8:1). However, it will increase emissions and fuel consumption. * Gasoline density = 737.22 kg/m3, air density (at 20o) = 1.2 kg/m3 The ratio 14.7 : 1 by weight equal to 14.7/1.2 : 1/737.22 = 12.25 : 0.0013564 The ratio is 9,030 : 1 by volume (one liter of gasoline needs 9.03 m3 of air to have complete burning).
    [Show full text]
  • Wildfire Smoke and Your Health When Smoke Levels Are High, Even Healthy People May Have Symptoms Or Health Problems
    PUBLIC HEALTH DIVISION http://Public.Health.Oregon.gov Wildfire Smoke and Your Health When smoke levels are high, even healthy people may have symptoms or health problems. The best thing to do is to limit your exposure to smoke. Depending on your situation, a combination of the strategies below may work best and give you the most protection from wildfire smoke. The more you do to limit your exposure to wildfire smoke, the more you’ll reduce your chances of having health effects. Keep indoor air as clean as possible. Keep windows and doors closed. Use a Listen to your body high- efficiency particulate air (HEPA) and contact your filter to reduce indoor air pollution. healthcare provider Avoid smoking tobacco, using or 911 if you are wood-burning stoves or fireplaces, burning candles, experiencing health incenses or vacuuming. symptoms. If you have to spend time outside when the Drink plenty air quality is hazardous: of water. Do not rely on paper or dust masks for protection. N95 masks properly worn may offer Reduce the some protection. amount of time spent in the smoky area. Reduce the amount of time spent outdoors. Avoid vigorous Stay informed: outdoor activities. The Oregon Smoke blog has information about air quality in your community: oregonsmoke.blogspot.com 1 Frequently asked questions about wildfire smoke and public health Wildfire smoke Q: Why is wildfire smoke bad for my health? A: Wildfire smoke is a mixture of gases and fine particles from burning trees and other plant material. The gases and fine particles can be dangerous if inhaled.
    [Show full text]
  • Robosuite: a Modular Simulation Framework and Benchmark for Robot Learning
    robosuite: A Modular Simulation Framework and Benchmark for Robot Learning Yuke Zhu Josiah Wong Ajay Mandlekar Roberto Mart´ın-Mart´ın robosuite.ai Abstract robosuite is a simulation framework for robot learning powered by the MuJoCo physics engine. It offers a modular design for creating robotic tasks as well as a suite of benchmark environments for reproducible re- search. This paper discusses the key system modules and the benchmark environments of our new release robosuite v1.0. 1 Introduction We introduce robosuite, a modular simulation framework and benchmark for robot learning. This framework is powered by the MuJoCo physics engine [15], which performs fast physical simulation of contact dynamics. The overarching goal of this framework is to facilitate research and development of data-driven robotic algorithms and techniques. The development of this framework was initiated from the SURREAL project [3] on distributed reinforcement learning for robot manipulation, and is now part of the broader Advancing Robot In- telligence through Simulated Environments (ARISE) Initiative, with the aim of lowering the barriers of entry for cutting-edge research at the intersection of AI and Robotics. Data-driven algorithms [9], such as reinforcement learning [13,7] and imita- tion learning [12], provide a powerful and generic tool in robotics. These learning arXiv:2009.12293v1 [cs.RO] 25 Sep 2020 paradigms, fueled by new advances in deep learning, have achieved some excit- ing successes in a variety of robot control problems. Nonetheless, the challenges of reproducibility and the limited accessibility of robot hardware have impaired research progress [5]. In recent years, advances in physics-based simulations and graphics have led to a series of simulated platforms and toolkits [1, 14,8,2, 16] that have accelerated scientific progress on robotics and embodied AI.
    [Show full text]
  • Toward Multi-Engine Machine Translation Sergei Nirenburg and Robert Frederlcing Center for Machine Translation Carnegie Mellon University Pittsburgh, PA 15213
    Toward Multi-Engine Machine Translation Sergei Nirenburg and Robert Frederlcing Center for Machine Translation Carnegie Mellon University Pittsburgh, PA 15213 ABSTRACT • a knowledge-based MT (K.BMT) system, the mainline Pangloss Current MT systems, whatever translation method they at present engine[l]; employ, do not reach an optimum output on free text. Our hy- • an example-based MT (EBMT) system (see [2, 3]; the original pothesis for the experiment reported in this paper is that if an MT idea is due to Nagao[4]); and environment can use the best results from a variety of MT systems • a lexical transfer system, fortified with morphological analysis working simultaneously on the same text, the overallquality will im- and synthesis modules and relying on a number of databases prove. Using this novel approach to MT in the latest version of the - a machine-readable dictionary (the Collins Spanish/English), Pangloss MT project, we submit an input text to a battery of machine the lexicons used by the KBMT modules, a large set of user- translation systems (engines), coLlect their (possibly, incomplete) re- generated bilingual glossaries as well as a gazetteer and a List sults in a joint chaR-like data structure and select the overall best of proper and organization names. translation using a set of simple heuristics. This paper describes the simple mechanism we use for combining the findings of the various translation engines. The results (target language words and phrases) were recorded in a chart whose initial edges corresponded to words in the source language input. As a result of the operation of each of the MT 1.
    [Show full text]
  • HCM1A0503 Inductor Data Sheet
    Technical Data 10547 Effective August 2016 HCM1A0503 Automotive grade High current power inductors Applications • Body electronics • Central body control module • Vehicle access control system • Headlamps, tail lamps and interior lighting • Heating ventilation and air conditioning controllers (HVAC) • Doors, window lift and seat control • Advanced driver assistance systems • 77 GHz radar system • Basic and smart surround, and rear and front view camera • Adaptive cruise control (ACC) Product features • Automatic parking control • AEC-Q200 Grade 1 qualified • Collision avoidance system/Car black box system • High current carrying capacity • Infotainment and cluster electronics • Magnetically shielded, low EMI • Active noise cancellation (ANC) • Frequency range up to 1 MHz • Audio subsystem: head unit and trunk amp • Inductance range from 0.2 μH to 10 μH • Digital instrument cluster • Current range from 2.3 A to 24 A • In-vehicle infotainment (IVI) and navigation • 5.5 mm x 5.3 mm footprint surface mount package in a 3.0 mm height • Chassis and safety electronics • Alloy powder core material • Airbag control unit • Moisture Sensitivity Level (MSL): 1 • Engine and Powertrain Systems • Halogen free, lead free, RoHS compliant • Powertrain control module (PCU)/Engine Control unit (ECU) • Transmission Control Unit (TCU) Environmental Data • Storage temperature range (Component): -55 °C to +155 °C • Operating temperature range: -55 °C to +155 °C (ambient plus self-temperature rise) • Solder reflow temperature: J-STD-020 (latest revision) compliant
    [Show full text]
  • Exploring Design, Technology, and Engineering
    Exploring Design, Technology, & Engineering © 2012 Chapter 21: Energy-Conversion Technology—Terms and Definitions active solar system: a system using moving parts to capture and use solar energy. It can be used to provide hot water and heating for homes. anode: the negative side of a battery. cathode: the positive side of a battery. chemical converter: a technology that converts energy in the molecular structure of substances to another energy form. conductor: a material or object permitting an electric current to flow easily. conservation: making better use of the available supplies of any material. electricity: the movement of electrons through materials called conductors. electromagnetic induction: a physical principle causing a flow of electrons (current) when a wire moves through a magnetic field. energy converter: a device that changes one type of energy into a different energy form. external combustion engine: an engine powered by steam outside of the engine chambers. fluid converter: a device that converts moving fluids, such as air and water, to another form of energy. four-cycle engine: a heat engine having a power stroke every fourth revolution of the crankshaft. fuel cell: an energy converter that converts chemicals directly into electrical energy. gas turbine: a type of engine that creates power from high velocity gases leaving the engine. heat engine: an energy converter that converts energy, such as gasoline, into heat, and then converts the energy from the heat into mechanical energy. internal combustion engine: a heat engine that burns fuel inside its cylinders. jet engine: an engine that obtains oxygen for thrust. mechanical converter: a device that converts kinetic energy to another form of energy.
    [Show full text]
  • Determination of Ammonia in Tobacco Smoke
    Application Note 1054 Note Application Determination of Ammonia in Tobacco Smoke Lipika Basumallick and Jeffrey Rohrer Thermo Fisher Scientific, Sunnyvale, CA, USA Key Words Ion Chromatography, Freebasing Nicotine, Dionex IonPac CS19 Column, Cigarette Goal To develop an IC method that can determine ammonia in tobacco smoke and is not subject to interference from small amines Introduction Ammonia (0.01–0.6%) occurs naturally in cured tobacco leaves and is now being used as an additive to enhance flavor and increase the amount of free nicotine in cigarette smoke. This practice is called freebasing of nicotine.1,2 Typically, the freebased amount equates to 0.2–10 mg ammonia per gram of tobacco or 7–200 μg and 320–450 μg ammonia per gram of smoked tobacco in mainstream and sidestream smoke, respectively (Figure 1).3 Sidestream Smoke Mainstream Smoke Ammonia is listed as a respiratory toxicant. This list Figure 1. Main- and sidestream smoke from a cigarette. was published in the Federal Register to announce that beginning June 22, 2012, the Food Drug and Cosmetics Act would require tobacco product manufacturers to On June 23, 2009, the U.S. Congress passed the Tobacco submit a list and quantify the constituents (including Control Act that granted the U.S. Food and Drug smoke constituents) identified by the FDA as harmful or Administration (FDA) authority to regulate the potentially harmful to health in each of their tobacco manufacture, marketing, and distribution of tobacco products.4 Hence, there is a need for a robust and sensitive products to protect public health. In January 2011, the analytical method for quantifying ammonia in tobacco FDA established a list of harmful and potentially harmful products and smoke.
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • The Fire and Smoke Model Evaluation Experiment—A Plan for Integrated, Large Fire–Atmosphere Field Campaigns
    atmosphere Review The Fire and Smoke Model Evaluation Experiment—A Plan for Integrated, Large Fire–Atmosphere Field Campaigns Susan Prichard 1,*, N. Sim Larkin 2, Roger Ottmar 2, Nancy H.F. French 3 , Kirk Baker 4, Tim Brown 5, Craig Clements 6 , Matt Dickinson 7, Andrew Hudak 8 , Adam Kochanski 9, Rod Linn 10, Yongqiang Liu 11, Brian Potter 2, William Mell 2 , Danielle Tanzer 3, Shawn Urbanski 12 and Adam Watts 5 1 University of Washington School of Environmental and Forest Sciences, Box 352100, Seattle, WA 98195-2100, USA 2 US Forest Service Pacific Northwest Research Station, Pacific Wildland Fire Sciences Laboratory, Suite 201, Seattle, WA 98103, USA; [email protected] (N.S.L.); [email protected] (R.O.); [email protected] (B.P.); [email protected] (W.M.) 3 Michigan Technological University, 3600 Green Court, Suite 100, Ann Arbor, MI 48105, USA; [email protected] (N.H.F.F.); [email protected] (D.T.) 4 US Environmental Protection Agency, 109 T.W. Alexander Drive, Durham, NC 27709, USA; [email protected] 5 Desert Research Institute, 2215 Raggio Parkway, Reno, NV 89512, USA; [email protected] (T.B.); [email protected] (A.W.) 6 San José State University Department of Meteorology and Climate Science, One Washington Square, San Jose, CA 95192-0104, USA; [email protected] 7 US Forest Service Northern Research Station, 359 Main Rd., Delaware, OH 43015, USA; [email protected] 8 US Forest Service Rocky Mountain Research Station Moscow Forestry Sciences Laboratory, 1221 S Main St., Moscow, ID 83843, USA; [email protected] 9 Department of Atmospheric Sciences, University of Utah, 135 S 1460 East, Salt Lake City, UT 84112-0110, USA; [email protected] 10 Los Alamos National Laboratory, P.O.
    [Show full text]