17 Aerospace Quality Systems (Aqs)

AEROSPACE QUALITY SYSTEMS (AQS)

The Aerospace Quality Systems Task Group conducts audits to demonstrate compliance to PRI AC7004. This quality system is required where no quality system approval exists in accordance with Nadcap Program Document PD 1100 and Operating Procedure OP 1103.

PRI Staff Engineer Contacts: Task Group Leadership: Susan Frailey, +1.618.615.4478, [email protected] Chairperson: Robin Borrelli, The Boeing Company Mike Gutridge, +1.740.587.9841, [email protected] Vice Chairperson: Scott O’Connor, Honeywell Aerospace Secretary: David Day, GE Aviation

Task Group Members

Subscriber Voting Members (UVM)

The Boeing Company Robin Borrelli Alternate: Patricia Wesemann Atlernate: Tony Marino Cessna Aircraft Company Saeed Cheema Atlernate: Jeff Robb Defense Contract Management Agency (DCMA) Michael Bess Eaton, Aerospace Group David Staten Jr. GE Aviation David Day Honeywell Aerospace Scott O’Connor Northrop Grumman Corporation Russell Cole Rockwell Collins Timothy Krumholz Spirit AeroSystems Chris Davison UTC Aerospace (Goodrich) Angelina Mendoza

Supplier Voting Members (SVM)

Aero Dynamics Cara Burzynski Tech Met Jim Tuminello The Young Engineers, Inc. David Eshleman

AQS Liaisons

CMSP Task Group David Day COMP Task Group Sally Spindor CP Task Group Michael Coleman CT Task Group Joel Mohnacky ETG Task Group Gilbert Shelby M&I Task Group Steve Rowe NDT Task Group Pete Torelli NMSE Task Group Jeff Robb WLD Task Group Saeed Cheema

CHEMICAL PROCESSING (CP)

The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes:

•Anodizing •Etching •Stripping •Chemical Cleaning •Laboratory Evaluation •Surface Prep Prior to Metal Bond •Chemical Milling •Paint/Dry Film Coatings •Surface Treatment/Passivation •Conversion/Phosphate Coating •Plating • Vacuum Cadmium & Aluminium IVD

PRI Staff Engineer Contacts: Task Group Leadership: Ethan Akins +1.724.772.8524 [email protected] Chairperson: Mike Stolze, Northrop Grumman Corp. Nigel Cook, +44.(0)1332.869.274, [email protected] Vice Chairperson: Mike Coleman, The Boeing Company Mike Graham, +1.724.772.8646, [email protected] Christine Nesbitt, +1.724.772.4073, [email protected] Robert Nixon, +1.724.772.8596, [email protected]

Task Group Members

Subscriber Voting Members (UVM)

309th Maintenance Wing-Hill AFB Caroline LeClair Honeywell Aerospace Steve Starr Airbus Carleen Brubaker Alternate: Jim Chan Airbus Defence & Space Josefa Rodriguez Baena Alternate: Bob Koukol Airbus Helicopters Malik Boutoba Israel Aerospace Industries Ron Cohen BAE Systems Inc., Electronic Systems Nick Magnapera Alternate: Daniel Amara BAE Systems – MAI (UK) Zia Usmani Lockheed Martin Corporation Susan Lewis Alternate: Craig Bowden Alternate: Mariusz Stanczyk Bell Helicopter Textron Katelyn Crowley Mitsubishi Heavy Industries Kazuhiro Kajima Alternate: Greg Haataja Alternate: Tomohiko Ashikaga Alternate: Dennis Slatton Alternate: Hirohiko Hattori The Boeing Company Michael Coleman Northrop Grumman Corporation Mike Stolze Alternate: Cary Baker Pratt & Whitney Jonathan Scudder Alternate: Sylvia Franklin Raytheon Co. Hal Abel Alternate: Andrew Murphy Alternate: Eric T. Oswald Bombardier Inc. Stephen Judge Rockwell Collins Inc. Michael Vosatka Cessna Aircraft Company Jeremy Phillips Alternate: Paul Slater Alternate: Jeff Cerre Rolls-Royce Barry Snitzer COMAC Yuhui Sun Alternate: Ester Sala-Bosch Alternate: Miao Wang SAFRAN Group Veronique Marcel Alternate: Wei Wang Alternate: Mihaela Lupu Eaton, Aerospace Group Martin Kolinko Sonaca Laurent Geerts Finmeccanica S.p.A. – Helicopter Division Fabrizio Quadrini Spirit AeroSystems Shawn Vierthaler Alternate: Alessio Colombara Triumph Group Gene Wallace Finmeccanica SpA - Settore Aeronautica Augusto Albolino Alternate: Gerald Harvey GE Aviation Muralikrishnan Ramalingam Alternate: Minh Quan Alternate: Jim O’Shea Alternate: Steve McDonough General Dynamics Corp. Raj Nagarajan UTC Aerospace (Goodrich) Karyn Deming Alternate: Richard Shain Alternate: Angelina Mendoza GKN Aerospace Sweden AB Jerker Nordh UTC Aerospace (Hamilton Sundstrand) Sergey Yesilevich Héroux Devtek Inc. Marc Montreuil Alternate: Chris Reilly Alternate: Marc-André Lefebvre

CHEMICAL PROCESSING (CP)

Task Group Members, Continued

Supplier Voting Members (SVM)

AAA Plating & Inspection, Inc. Jerry Wahlin Hohman Plating & Mfg Inc. Phillip Bratton Aerofin Laboratories Ltd. Paul French Kearfott Corporation – Motion System Division Sarah Fuqua Alternate: Alex French Lisi Aerospace Torrance Warren DeCuir Alcoa Howmet Dover Castings, Inc. Matt Zanolli Lord Corporation Ken Rettger Anodyne, Inc. Gary Fox Alternate: Ken Shouse Anoplate Corp. Milt Stevenson Alternate: Brian Zentis Asahi Kinzoku Kogyo Inc. Yoshiomi Sukesada Magnetic Inspection Laboratory Inc. Mike Noettl Avcorp Composite Fabrications Jonathan Hebben Metal Finishing Co. Jim Cummings Avcorp Industries Inc. Vitorio Stana Olympic Scientific Inc. David Serbousek B-D Industries Inc. Jim Denton Otto Fuchs KG Bernd Spelsberg Barnes Aerospace Awwen Tyrsson Poly-Metal Finishing Kim Porter Black Oxide Industries, Inc. Greg Penny RBC Aircraft Products Inc Nathan Gangloff Bowman Plating Company, Inc. Blanca E. Huerta Robert Stuart Ltd. Mark Airey Central Metal Finishing Peter Cox Saporito Finishing Company Steve Stone ChemResearch Co. Inc. Ron Franklin Alternate: Jeff Logan Chrome Plus International Simone Murphy-Fickenworth Skills Inc. Bill Heeter Alternate: Jorge DellaCosta Stabile Plating Co Michael Franciso CIL Metal Finishing/Electroplating Dennis Reidy Superior Plating Inc. Rosa Martin Element Materials Technology Julie Nguyen Team Industrial Services – Cincinnati Cindy Roth Esterline - Hytek Finishes Company Steve Simacek Tech Met Jim Ringer F.M. Callahan & Son Inc. Eric Jacklin Alternate: Jim Tuminello Galion Stephane Chaumeil TechMetals Inc. Christopher Fredrickson GKN Aerospace Chem-Tronics Inc. Dinh Ngo Alternate: Phil Brockman Har-Conn Chrome Co. Daniel Backus Triumph Processing, Embee Division Inc. Mitchell Tanner Helicomb International Tammi Schubert U.S. Chrome Corp. of Connecticut John Carpenter Hi-Tech Metal Finishing Guy Saenz Westfield Electroplating Co. Keven Kudelka Alternate: Abdul Nathani X-Ray Industries, Inc. Richard Kline

COATINGS (CT)

The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: x Thermal Spray x Coating Evaluation x Vapor Deposited Coatings x Plating of Coated Parts x Diffusion Coating Processes x Heat Treating of Coated Parts x Stripping of Coating Materials

PRI Staff Engineer Contacts: Task Group Leadership: Justin Rausch, +1.724.772.7116, [email protected] Chairperson: Udo Schuelke, Honeywell Aerospace Robert Lizewski, +1 724 772 8681, [email protected] Vice Chairperson: Joel Mohnacky, UTC Aerospace (Hamilton Sundstrand) Jim Lewis, +1 724 772 8688, [email protected] Secretary: Dale Harmon, Cincinnati Thermal Spray

Task Group Members

Subscriber Voting Members (UVM)

GE Aviation James Dunn Parker Aerospace Group Dan Loveless Alternate: Erkan Kilic Rolls-Royce Patrick Kiernan GKN Aerospace Sweden AB Jan Wigren Alternate: Tetyana Shmyreva Alternate: Björn Kjellman SAFRAN Group Fabrice Crabos Honeywell Aerospace Udo Schuelke Alternate: Francis Monerie-Moulin Alternate: Jack Saunders UTC Aerospace (Goodrich) Mark Binfield Alternate: Branislav Domko UTC Aerospace (Hamilton Sundstrand) Joel Mohnacky

Supplier Voting Members (SVM)

Cincinnati Thermal Spray Dale Harmon Ellison Surface Technologies Ronald Stewart Alternate: Francisco Contreras Gastelum Howmet Thermatech Coatings Vern Talmadge Oerlikon Metco Canada Inc. Brent Bartlett Praxair Surface Technologies Steve Payne Techmetals, Inc. Jeff Tomczak Alternate: Phillip Brockman

ATTENTION ALL Nadcap COATINGS (CT) SUPPLIERS

In order to smoothly facilitate your upcoming Nadcap initial or re-accreditation audit, the Nadcap Coatings Task Group would like you to be aware that eAuditNet contains numerous self-help documents to guide through the process. The path provided below will lead you to the Coatings Audit Resources file which is a quick and easy reference tool providing links to numerous self-help documents pertinent to every stage of the Nadcap audit process. You are encouraged to take advantage of these valuable self-diagnostic references prior to your Nadcap audit. They may help you to avoid many of the most common findings and maximize your benefit throughout the audit while minimizing overall costs to your business.

Path: eAuditNetĺResourcesĺDocumentsĺPublic DocumentsĺCoatingsĺCoatings Audit Resources

The Nadcap Coatings Task Group is committed to continually improving the program for all participants and welcomes all suggestions that support their efforts. Please do not hesitate to contact Justin Rausch with your suggestions or attend a Nadcap meeting to contribute your ideas in person.

COATINGS (CT) COMPOSITES (COMP)

The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: x Thermal Spray x Coating Evaluation x Vapor Deposited Coatings x Plating of Coated Parts x CMP – Compression Molding x MB – Metal Bonding x Diffusion Coating Processes x Heat Treating of Coated Parts x CP – Core Processing x PAR – Prepeg/Adhesive Bonding/Resin Film Infusion x Stripping of Coating Materials x LRP – Liquid Resin Processing

PRI Staff Engineer Contacts: Task Group Leadership: PRI Staff Engineer Contacts: Task Group Leadership: Justin Rausch, +1.724.772.7116, [email protected] Chairperson: Udo Schuelke, Honeywell Aerospace John Tibma +1.724.772.7148, [email protected] Chairperson: Keith Panuska, Lockheed Martin Corp. Robert Lizewski, +1 724 772 8681, [email protected] Vice Chairperson: Joel Mohnacky, UTC Aerospace (Hamilton Sundstrand) Vice Chairperson: Tara Campbell, Rolls-Royce Jim Lewis, +1 724 772 8688, [email protected] Secretary: Dale Harmon, Cincinnati Thermal Spray Secretary: Monica Alcala, Honeywell Aerospace Task Group Members Task Group Members

Subscriber Voting Members (UVM) Subscriber Voting Members (UVM)

GE Aviation James Dunn Parker Aerospace Group Dan Loveless Airbus Javier Garcia-Baeza General Dynamics Pam Blevins Alternate: Erkan Kilic Rolls-Royce Patrick Kiernan Alternate: David Constable GKN Aerospace Richard Perrett GKN Aerospace Sweden AB Jan Wigren Alternate: Tetyana Shmyreva Airbus Helicopters Achim Enzmann Gulfstream Aerospace Ron Kramer Alternate: Björn Kjellman SAFRAN Group Fabrice Crabos Alternate: Olivier Goupillon Honeywell Aerospace Monica Alcala Honeywell Aerospace Udo Schuelke Alternate: Francis Monerie-Moulin BAE Systems – MAI (UK) Brett Hemingway Alternate: James Cobb Alternate: Jack Saunders UTC Aerospace (Goodrich) Mark Binfield Alternate: Steve Grunshaw Alternate: Leah Markowitz Alternate: Branislav Domko UTC Aerospace (Hamilton Sundstrand) Joel Mohnacky Bell Helicopter Textron John Key Jr. Alternate: Konstantina Stefanidou Alternate: Elliott Schulte Israel Aerospace Industries Herman Leibovich The Boeing Company Lance Loeks Lockheed Martin Corporation Keith Panuska Supplier Voting Members (SVM) Alternate: Adam Dalesandro Northrop Grumman Corporation Larry Olsen Cincinnati Thermal Spray Dale Harmon Alternate: Joseph DeVirgilio Raytheon Company Randy Armstrong Ellison Surface Technologies Ronald Stewart Alternate: Richard Hammond Rolls-Royce Tara Campbell Alternate: Francisco Contreras Gastelum Alternate: Frank Lennert SAFRAN Group Laura Benedetti Howmet Thermatech Coatings Vern Talmadge Alternate: Rick Ouellette Alternate: Patrick Dunleavy Oerlikon Metco Canada Inc. Brent Bartlett Bombardier Inc. Anne Stanley Sikorsky Aircraft Xiaohang Mike Song Praxair Surface Technologies Steve Payne Alternate: Mario Simard Sonaca Eric LeFort Techmetals, Inc. Jeff Tomczak Alternate: Frank Thomas Alternate: Laurent DeJaie Alternate: Phillip Brockman Cessna Aircraft Company Tawny Blumenshine Spirit AeroSystems Kevin Dowling Alternate: Jeremy Phillips Alternate: Justin Walker ATTENTION ALL Nadcap COATINGS (CT) SUPPLIERS COMAC Ping Chen Triumph Group Sally Spindor Alternate: Yuhui Yuan Alternate: Minh Quan In order to smoothly facilitate your upcoming Nadcap initial or re-accreditation audit, the Nadcap Coatings Task Group would like you to be Embraer Jefferson Santos Silva UTC Aerospace (Goodrich) Angelina Mendoza aware that eAuditNet contains numerous self-help documents to guide through the process. The path provided below will lead you to the Finmeccanica S.p.A. – Helicopter Division Fabrizio Quadrini Alternate: William Macias Coatings Audit Resources file which is a quick and easy reference tool providing links to numerous self-help documents pertinent to every stage of the Nadcap audit process. You are encouraged to take advantage of these valuable self-diagnostic references prior to your Nadcap Finmeccanica SpA - Settore Aeronautica Michele Losito audit. They may help you to avoid many of the most common findings and maximize your benefit throughout the audit while minimizing overall GE Aviation Andreas Mastorakis costs to your business. Alternate: Douglas Armstrong

Path: eAuditNetĺResourcesĺDocumentsĺPublic DocumentsĺCoatingsĺCoatings Audit Resources

21 20

COMPOSITES (COMP)

PRI Staff Engineer Contacts: Task Group Leadership: John Tibma +1.724.772.7148, [email protected] Chairperson: Keith Panuska, Lockheed Martin Corp. Vice Chairperson: Tara Campbell, Rolls-Royce Secretary: Monica Alcala, Honeywell Aerospace Task Group Members, Continued

Supplier Voting Members (SVM)

Applied Aerospace Structures Mike Guthmiller Alternate: Ben Flores Applied Composites Engineering Jeff Rybolt Alternate: Tom Brooks Avcorp Industries Inc. Vitorio Stana Brenner Aerospace Bob Baltzer Composiflex, Inc. Rhonda Sutter DuPont de Nemours and Company Breton Lutz Alternate: Jim Weishampel Euro-Composites Arno Toelkes Exova (UK) Limited Natalia Becerra Pozo FACC Operations GmbH Hubert Kern GKN Aerospace Tommie Lakes Alternate: Sue Lauer Helicomb International, Inc Tammi Schubert Hexcel Corporation Jim Brown Alternate: Stephen Davies Alternate: Roy Redmond LMI Aerospace Gordon Cameron Orbital ATK – Aerospace Structures Division Karen Quinn Alternate: Bryan Loveless Park Aerospace Technologies Corp. Frank Alberto Russell Plastics Technology Co., Inc. Ivan Reyes Alternate: Dorota Stankiewicz Swift Engineering Inc. Kevin Brennan Alternate: Rick Heise

Liaisons

TE Wire Patrick Durkin

CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP)

The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes: x Holemaking x Broaching x Turning x Milling x Grinding x Edge Treatment

PRI Staff Engineer Contacts: Task Group Leadership: Andy Statham, +44.133.286.9276, [email protected] Chairperson: Charles Beargie, UTC Aerospace (Goodrich) Vice Chairperson: Secretary: John Pfeiffer, GE Aviation

Task Group Members

Subscriber Voting Members (UVM)

Airbus Helicopters Philippe Durand GE Aviation John Pfeiffer Alternate: Ertem Aygin Heroux-Devtek Marc-André Lefebvre Honeywell Aerospace Ken Abram Alternate: Mario Enriquez Alternate: Doug Webb MTU Aero Engines AG Ulf Hampel SAFRAN Group Vincent Dutilh Alternate: Romain Septfons UTC Aerospace (Goodrich) Charles Beargie Alternate: Zeljko Calija Alternate: Dan Graves

Supplier Voting Members (SVM)

Absolute Technologies Andre Mulyono Moeller Manufacturing Co James Jensen Strite Precision Machining Limited Sean Carvalho

ELASTOMER SEALS (SEALS)

The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. Audit elements include: O-rings, plate seals / rubber bonded to substrates, molded shapes, compounding, compression seals, and fabric/textile reinforced seals.

PRI Staff Engineer Contacts: Task Group Leadership: Keith Purnell, +1.724.772.8685, [email protected] Chairperson: Manuel Koucouthakis, Honeywell Aerospace

Task Group Members

Subscriber Voting Members (UVM)

The Boeing Company Patrick Heppe Alternate: Michelle Tuttle Cessna Aircraft Company Brent Clothier Honeywell Aerospace Manuel Koucouthakis Alternate: Konstantina Stefanidou Alternate: Bob Teegarden Lockheed Martin Corporation Kent DeFranco Pratt & Whitney Melissa Facas Rolls-Royce Shaun Brewin Alternate: Benjamin Shaw US Air Force Michelle Barga Alternate: Alan Fletcher UTC Aerospace (Hamilton Sundstrand) Marc Gage Alternate: David Grulke

Supplier Voting Members (SVM)

E. I. DuPont de Nemours and Company Shelia Olewine Freudenberg-NOK Manuel Rebelo Meggitt Aerospace Limited Mark Keal Alternate: David Sykes Micro-tronics Inc. Scott Kronabetter Parker Hannifin John Dickinson Alternate: Joe Tengco Trelleborg Sealing Solutions John Cutler Alternate: Robert Nichols

ELECTRONICS (ETG)

The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies.

PRI Staff Engineer Contacts: Task Group Leadership: Susan Frailey, +1.618.615.4478, [email protected] Chairperson: Roy Garside, Rolls-Royce Julia Markardt, +1.724.772.8649, [email protected] Vice Chairperson: Roger Bloomfield, UTC Aerospace (Goodrich) Secretary: Scott Meyer, UTC Aerospace (Goodrich) Task Group Members

Subscriber Voting Members (UVM)

Airbus Magali Vigier Honeywell Aerospace Junta Okutsu Alternate: John Mastorides Alternate: Richard Rumas Lockheed Martin Vijay Kumer Raytheon Company Gilbert Shelby Rockwell Collins, Inc. Rachel Grinvalds Rolls-Royce Roy Garside SAFRAN Group Nathalie LeFevre Alternate: Jerome Hery Thales Arnaud Grivon Alternate: Philippe Larivee UTC Aerospace (Goodrich) Scott Meyer Alternate: Roger Bloomfield UTC Aerospace (Hamilton Sundstrand) William Cardinal

Supplier Voting Members (SVM)

AbelConn Electronics Douglas Schueller Cristek Interconnects, Inc. Donna Lopez-Evans Alternate: Julie Barker Ducommun LaBarge Technologies, Inc. Jennifer Wagner Eltek USA Inc. James Barry Fokker Elmo B.V. Kees van der Schoor Graphic Plc Paul Comer Logic PD Matthew Smith Meggitt Sensing Systems Jose Lages SELHA Jean-Francois Mahe Somacis SpA Cristiano Bazzi TTM Technologies Juan Vasquez Ultra Electronics Limited Jeremy Needs

FLUID DISTRIBUTION SYSTEMS (FLU)

The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following:

x Hose Manufacturing x Hose Assembly x Fittings & Other Machined Components x Value Added Hose Assembly Distributors x Couplings x Titanium Tubing Manufacturers

PRI Staff Engineer Contacts: Task Group Leadership: Keith Purnell, +1.724.772.8685, [email protected] Chairperson: Samuel Buri, The Boeing Company Vice Chairperson:Mark Paul, Rolls-Royce Corporation

Task Group Members

Subscriber Voting Members (UVM)

Bell Helicopter Textron Benjamin Hedges The Boeing Company Samuel Buri Alternate: Joe Bebey GE Aviation Dan Smith Rolls-Royce Mark Paul Alternate: Shweta Dundon

Supplier Voting Members (SVM)

Aerofit, LLC Dale Gordon Designed Metal Connections, Inc. dba Permaswage USA May Danhash Eaton Corporation John Brittain Hydraflow Chris Schofield Parker Hannifin, Stratoflex Products Andrew Mau Smiths Tubular Systems - Laconia Phillip Wade Spencer Aerospace Manufacturing, LLC Mark Scatoloni Voss Industries Michael Schleckman

HEAT TREATING (HT)

The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following:

x Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat Resisting Alloys, Magnesium, Other Nonferrous Metals x Heat Treating Processes – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding, Stress Relieving, Induction Hardening, Hot Isostatic Pressing (HIP) and Sintering x Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System, Quench Systems x Brazing

PRI Staff Engineer Contacts: Task Group Leadership: Jerry Aston, +44.133.286.9273, [email protected] Chairperson: Thomas Norris, UTC Aerospace (Goodrich) Marcel Cuperman, +1.412.367.2547, [email protected] Vice Chairperson: Cyril Vernault, SAFRAN Group Rob Hoeth, +1.724.772.8657, [email protected] Secretary: Sunder Rajan, Raytheon Co. Mark Burval, +1.724.772.8692, [email protected]

Task Group Members

Subscriber Voting Members (UVM)

Airbus Alex Richez Israel Aerospace Industries Arie Ben Dov Airbus Defence & Space Josefa Rodriguez-Baena Liebherr Aerospace Andreas Elbs Alternate: Cristina Gonzalez-Perez Lockheed Martin Corp. Earl Pruett Airbus Helicopters Marc Taillandier Alternate: Mariusz Stanczyk Alternate: Stefan Lemberger Mitsubishi Heavy Industries, LTD Takuya Konno BAE Systems – MAI (UK) Andrew Hopkins Alternate: Takahiro Tachibana Alternate: Simon Scott MTU Aero Engines AG Frank Brungs The Boeing Company Doug Matson Alternate: Bernd Daniels Alternate: Carolyn Backus Northrop Grumman Corporation Eddy Pham Alternate: Jeff Koss Parker Aerospace Group David Isenberg Bombardier Inc. Tom Wilson Pratt & Whitney Melissa Facas Alternate: Louis Tremblay Pratt & Whitney Canada Steven Mackenzie Cessna Aircraft Company Linnie Hook Raytheon Co. Sunder Rajan Alternate: Christina Heiman Rockwell Collins Inc. Paul Slater COMAC Weitao Ma Alternate: Ario Estrada Alternate: Hongping Li Rolls-Royce Mark Emerson Alternate: Ji Yuan Alternate: Shaun Brewin Eaton, Aerospace Group Pedro Aranda Alternate: Grzegorz Wryk Finmeccanica S.p.A. – Helicopter Division Fabrizio Quadrini SAFRAN Group Cyril Vernault Alternate: Alessandro Miglio Sikorsky Aircraft John Merritt Finmeccanica SpA - Settore Aeronautica Francesco Acerra Alternate: Karen Kim GE Aviation Jeff Thyssen Sonaca Laurent Geerts Alternate: Travis Grohoske Spirit AeroSystems Craig Clasper GKN Aerospace U.K. Nigel Ashby Triumph Group, Inc. Gerald Harvey GKN Aerospace Sweden AB Peter Hammarbo UTC Aerospace (Goodrich) Thomas Norris Gulfstream Aerospace Christopher Borg Alternate: William Macias Héroux Devtek Inc. Marc-André Lefebvre UTC Aerospace (Hamilton Sundstrand) Michael Corsino Honeywell Aerospace Martin Day Alternate: Chris Reilly Alternate: Doug Webb

HEAT TREATING (HT)

Task Group Members, Continued

Supplier Voting Members (UVM)

Alcoa Inc Bill Rogers Alternate: Brian Reynolds Alcoa Fastening Systems & Rings Jonathan Gonzalez Blanchard Metals Processing Rich Madsen Blades Technology Ltd Alexander Klyuch Bodycote Heat Treatments (UK) Iain Mackenzie Braddock Metallurgical Inc Griff Braddock Alternate: Roy Adkins Carpenter Technology Dennis Fried Alternate: Stephan Kaunike Constellium France Michael Niedzinski Continental Heat Treating / Quality Heat Treating Johanna Lisa Alternate: Ken Nelson Dunkirk Specialty Steel, LLC Kevin Seidel Alternate: Barry Rafan FPM Heat Treating LLC Robert Ferry Firth Rixson Forgings Limited Nicholas Wood Haynes International Jeffrey Sipf Alternate: Tina Corbin Alternate: Vicki Delaney Howmet Castings & Services, Inc. Dover Casting (AHDC) John Kunkle Metal Finishing Company Inc. Dave Shonts Metallurgical Processing Inc. Timothy Paradis Alternate: Stuart Sherman MMS Thermal Processing Jeremy Leetz Paulo – American Brazing Robert Cvetichan PCC Structurals – Carson City Richard Lewis Perryman Company Kevin VonScio PFW Aerospace GmbH Wilfried Weber Solar Atmospheres, Inc. Edward Engelhard Alternate: Gordon Porterfield III Specialty Steel Treating Tom Valenti Alternate: Allison Tackett TechJet Airfoils Ltd Amir Mendelovich Wyman Gordon Ltd Stuart Mellor

MATERIALS TESTING LABORATORIES (MTL)

This task group has published the checklists (AC7101/1 – AC7101/7, AC7101/9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: x ISO/IEC 17025 Requirements x Metallography (Micro & Macro) x Microhardness x Chemical Testing x Hardness x Test Specimen Preparation x Mechanical Testing x Corrosion

PRI Staff Engineer Contacts: Task Group Leadership: Kevin Wetzel, +1.724.772.8652, [email protected] Chairperson: Amanda Rickman, Raytheon Co. Jim Lewis, +1.724.772.8688, [email protected] Vice Chairperson: Dan Graves, UTC Aerospace (Goodrich) Rob Hoeth, +1.724.772.8657, [email protected] Robert Lizewski, +1.724.772.8681, [email protected] Justin Rausch, +1.724.772.7116, [email protected]

Task Group Members

Subscriber Voting Members (UVM)

Airbus Muriel Malhomme Alternate: Stuart Hunt Airbus Helicopters Trebeden Fabrice Bell Helicopter Textron Colin Fletcher The Boeing Company John Knie Alternate: Shamim Abbas Alternate: Frank Lennert Alternate: Armen Talverdian Bombardier Inc. Pietro Bonarrigo Alternate: Alexandre Bourgeois Cessna Aircraft Company Jennifer McKeegan COMAC Huiqing Zhang Eaton, Aerospace Group Ben Clark Honeywell Aerospace Claudia Lourdes Granados Torres Alternate: Jim Hartman Alternate: Tim Myers MTU Aero Engines AG Christian Schwaminger Alternate: Thomas Brendel Northrop Grumman Corporation Gary Winters Pratt & Whitney Canada David Bale Raytheon Co. Amanda Rickman Rockwell Collins Inc. David Cordova Rolls-Royce Barry Ward Alternate: Bruce Nanasy SAFRAN Group Christine Brassine Alternate: Philippe Brailly Spirit AeroSystems Arielle Corne Alternate: Kevin Elston Alternate: Lindsay Schurle UTC Aerospace (Goodrich) Dan Graves

MATERIALS TESTING LABORATORIES (MTL)

Task Group Members, continued

Supplier Voting Members (SVM)

Alcoa, Inc. Robert Haldane Howmet Research Corp. Brian Griffin Alcoa Global Fasteners Boyko Kirilov Alternate: Michelle McDonald Atlas Testing Laboratories, Inc. Sharon Norton IMR Test Labs Deena Crossmore Alternate: Alan Hambley Laboratory Testing Inc. Frank Peszka ATI Flat Rolled Products Kevin Hineman Lisi Aerospace Don Huffman ATI Forged Products – Cudhay Operations Byron Skillings L.I.T. Labs. Inc. T. Rao Tipirneni ATI Specialty Materials Monroe Operations Margaret Willis Lucideon M+P Shirley Strickland Aubert & Duval Pierre-Emmanuel Richy Alternate: Frank Anderson Alternate: Simon Tournebize Metals Technology, Inc. Jason Wright Barnes Aerospace Awwen Tyrsson Metcut Research Associates, Inc. Jeff Viney Alternate: Daryl Erickson Alternate: Philip Bretz Bohler Edelstahl GmbH & Co KG Kay Fisher National Analysis Center – Iron & Steel Zheng Liu Bristol Industries Rick Kuhns Atlernate: Tao Liu Bureau Veritas Laboratories Eric Chabault NSL Analytical Services, Inc. Andrea Pierce Bytest SRL Umberto Baratta Olympic Scientific, Inc. Dave Serbousek Carpenter Technology Corp. John Chir Otto Fuchs KG Jens Kiehn Alternate: Steven Keck Perryman Company Kevin VonScio Dunkirk Speciality Steel, LLC Kevin Seidel RTI Advanced Forming, Inc. Ben Ransom Element Materials Technology David Luoni Special Metals Wiggin Ltd. – IncoTest Peter Scrimshire Alternate: Bob Olevson Timet David DeMarco Exova, Inc. Corwyn Berger Titania, Ensayos y Proyectos Industriales S.L. Pedro Astola-Gonzalez Haynes International Inc. Annette O’Connell Westmoreland Testing James D. Rossi Heartland Precision Fasteners Donna Warner

MEASUREMENT & INSPECTION (M&I)

The Measurement & Inspection Task Group is conducting audits to demonstrate compliance to PRI AC7130 checklists. These audits address the Nadcap requirements for the following processes: x AC7130/1 Coordinate Measuring Machines (CMM) x AC7130/2 Laser Tracker x AC7130/3 Articulating Arm x AC7130/5 Mass Airflow Measurement of Turbine Engine Parts x AC7130/6 General Inspection

PRI Staff Engineer Contacts: Task Group Leadership: Dave Marcyjanik, +1.724.772.7113, [email protected] Chairperson: Simon Gough-Rundle, Rolls-Royce Vice Chairperson: Norman Gross, The Boeing Company

Task Group Members

Subscriber Voting Members (UVM)

Airbus Ronan Cauchy SAFRAN Group Cyril Lerebours Airbus Defence and Space Cristina Gonzalez-Perez Alternate: Benoît Gottié The Boeing Company Norman Gross Spirit AeroSystems Graeme Rankin Alternate: Randall Becker Alternate: Chris Davison Alternate: Mark Clark Alternate: Andrew Smith GE Aviation Al Berger UTC Aerospace (Goodrich) Steve Row Alternate: Mark Rechtsteiner Rockwell Collins Inc. Timothy Krumholz Rolls-Royce Simon Gough-Rundle Alternate: Darren Yochum

Supplier Voting Members

Absolute Technologies, Inc. Timothy Bergquist Helicomb Intl. Tammi Schubert Alcoa Fastening Systems & Rings Owe Carlsson Hexcel Dale Collins Barnes Aerospace Fabrications Daryl Erickson IHI Corporation Takahito Araki Click Bond, Inc. Lee Parsley LMI Aerospace David Sherrill Doncasters Chard Andrew Dunbabin Alternate: Gordon Cameron Alternate: Gail Shepheard Meyer Tool, Inc. Shelly Lawless Ducommun AeroStructures New York, Inc. Ralph Capra Alternate: Doug Key Alternate: James Ahlemeyer National Physical Laboratory Lisa Leonard Esterline Engineered Materials – Darchem Engineering Gary Thompson The Young Engineers, Inc. Dave Eshleman

METALLIC MATERIALS MANUFACTURING (MMM)

PRI Staff Engineer Contacts: Task Group Leadership: Jerry Aston, +44.133.286.9273, [email protected] Chairperson: Elaine Boswell, Rolls-Royce Jim Lewis, +1.724.772.8688, [email protected] Vice Chairperson: Brian Streich, Honeywell Aerospace Secretary: Greg Goldhagen, UTC Aerospace (Hamilton Sundstrand)

Task Group Members

Subscriber Voting Members (UVM)

Airbus Paul Graham Bombardier Inc. Alexandre Bourgeois GKN Aerospace Sweden AB Johan Tholerus Honeywell Aerospace Brian Streich MTU Aero Engines AG Werner Buchmann Rolls-Royce Elaine Boswell Alternate: Thomas Ancich SAFRAN Group Raphael Mentasti UTC Aerospace (Goodrich) Ben Evans UTC Aerospace (Hamilton Sundstrand) Greg Goldhagen

Supplier Voting Members (SVM)

Alcoa Inc. Bill Rogers Alternate: Brian Reynolds Alcoa Fastening Systems & Rings Jonathan Gonzalez ATI Specialty Materials- Monroe Operations Bruce Leckey Bohler Schmiedetechnik GmbH & Co KG Wolfgang Liegl Alternate: Rudolf Graf Firth Rixson Forgings Limited Nicholas Wood Forgital Italy Spa Fabio Sturzen Frisa Forjados, S.A. de C.V Hugo Guarjardo Otto Fuchs KG Markus Büscher Alternate: Markus Fuchsmann Special Metals Corp. Michael Snyder Techjet Airfoils Ltd. Amir Mendelovich Universal Stainless Ramachandra Canumalla Wyman Gordon Beth Lewis Alternate: Stuart Mellor

METALLIC MATERIALS MANUFACTURING (MMM) NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE)

PRI Staff Engineer Contacts: Task Group Leadership: The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the Jerry Aston, +44.133.286.9273, [email protected] Chairperson: Elaine Boswell, Rolls-Royce AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Jim Lewis, +1.724.772.8688, [email protected] Vice Chairperson: Brian Streich, Honeywell Aerospace Secretary: Greg Goldhagen, UTC Aerospace (Hamilton Sundstrand) Nonconventional Machining

x Electrochemical Machining x Laser Beam Machining – Cutting, Drilling Task Group Members x Electrochemical Grinding x Laser Marking x Electrical Discharge Machining – Fast Hole, Sinker, Wire, x Spark Erosion Grind EC Drilling Subscriber Voting Members (UVM)

Airbus Paul Graham Bombardier Inc. Alexandre Bourgeois PRI Staff Engineer Contacts: Task Group Leadership: GKN Aerospace Sweden AB Johan Tholerus Mark Hunkele, +1.724.772.8689, [email protected] Chairperson: Paul Woolley, Rolls-Royce Honeywell Aerospace Brian Streich Vice Chairperson: Mike Schmidt, GE Aviation MTU Aero Engines AG Werner Buchmann Secretary: David McCallister, Pratt & Whitney Rolls-Royce Elaine Boswell Alternate: Thomas Ancich Task Group Members SAFRAN Group Raphael Mentasti UTC Aerospace (Goodrich) Ben Evans Subscriber Voting Members (UVM) UTC Aerospace (Hamilton Sundstrand) Greg Goldhagen Airbus Simon Long Bombardier Inc. Caroline Des Landes Cessna Aircraft Company Jeffery Robb Supplier Voting Members (SVM) Alternate: Jeremy Phillips Alcoa Inc. Bill Rogers Finmeccanica SpA - Settore Aeronautica Vincenzo DeRosa Alternate: Brian Reynolds GE Aviation Nouman Usmani Alcoa Fastening Systems & Rings Jonathan Gonzalez Alternate: Mike Schmidt ATI Specialty Materials- Monroe Operations Bruce Leckey Alternate: Evren Yuksekkaya Bohler Schmiedetechnik GmbH & Co KG Wolfgang Liegl GKN Aerospace Sweden AB Joakim Idetjarn Alternate: Rudolf Graf Honeywell Aerospace Alex Pohoata Firth Rixson Forgings Limited Nicholas Wood Alternate: Martin Grepl Forgital Italy Spa Fabio Sturzen Mitsubishi Heavy Industries Ltd. Akiko Inoue Frisa Forjados, S.A. de C.V Hugo Guarjardo Alternate: Tomohiko Ashikaga Otto Fuchs KG Markus Büscher MTU Aero Engines AG Gudrun Muehlbauer Alternate: Markus Fuchsmann Alternate: Holger Polanetzki Special Metals Corp. Michael Snyder Parker Aerospace Dan Loveless Techjet Airfoils Ltd. Amir Mendelovich Pratt & Whitney David McCallister Universal Stainless Ramachandra Canumalla Rolls-Royce Paul Woolley Wyman Gordon Beth Lewis UTC Aerospace (Goodrich) Zeljko Calija Alternate: Stuart Mellor Supplier Voting Members (SVM)

Barnes Aerospace Gigi Streeter Alternate: Angelo Monzo Danville Metal Stamping Co., Inc. Tim Scarlett Flow International Corporation Mohamed Hashish Meyer Tool, Inc. Kevin Klingelhafer Alternate: Shelly Lawless Micro-Tronics, Inc. Jeffrey Kupis

32 33

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE)

Surface Enhancement x Automated Peening x Manual Peening x Computer Controlled Peening x Peen Forming x Flapper Peening

PRI Staff Engineer Contacts: Task Group Leadership: Mark Hunkele, +1.724.772.8689, [email protected] Chairperson: Paul Woolley, Rolls-Royce Vice Chairperson: Mike Schmidt, GE Aviation Secretary: David McCallister, Pratt & Whitney

Task Group Members

Subscriber Voting Members (UVM)

Airbus Simon Long GKN Aerospace Sweden AB Joakim Idetjarn Bell Helicopter Textron Greg Syvertson Héroux Devtek Inc. Marc-André Lefebvre The Boeing Company Glen Heide Honeywell Aerospace Alex Pohoata Alternate: K.T. Quader Alternate: Martin Grepl Alternate: Michael Steele Mitsubishi Heavy Industries Ltd. Akiko Inoue Bombardier Inc. Caroline Des Landes Alternate: Tomohiko Ashikaga Cessna Aircraft Company Jeffery Robb MTU Aero Engines AG Gudrun Muehlbauer Alternate: Jeremy Phillips Alternate: Holger Polanetzki Finmeccanica S.p.A. – Helicopter Division Fabrizio Quadrini Parker Aerospace Dan Loveless Alternate: Alessio Colombara Pratt & Whitney David McCallister Finmeccanica SpA - Settore Aeronautica Vincenzo DeRosa Rolls-Royce Paul Woolley GE Aviation Mike Schmidt Spirit AeroSystems, Inc. Tommy Howland Alternate: John Pfeiffer Triumph Group Rodney Holt Alternate: Nouman Usmani UTC Aerospace (Goodrich) Zeljko Calija Alternate: Evren Yuksekkaya

Supplier Voting Members (SVM)

Asahi Kinzoku Kogyo Inc. Yoshiomi Sukesada Avion Solutions, Inc. Kelly McClurg Blades Technology Ltd. Alexander Klyuch PTI Industries Inc. Dawn Stokes

NONDESTRUCTIVE TESTING (NDT)

The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: x Magnetic Particle x Ultrasonic x Eddy Current x Liquid Penetrant x Radiography x Digital Radiography, Digital Detector x Ultrasonic Survey-Rotating x Computed Radiology Array Components

PRI Staff Engineer Contacts: Task Group Leadership: Mark Aubele, +1.724.772.8654, [email protected] Chairperson: Dave Royce, Pratt & Whitney Phil Ford, +44.(0)144.322.5545, [email protected] Vice Chairperson: Tony Warren, Airbus Mike Gutridge, +1.740.587.9841, [email protected] Secretary: Steve McCool, Honeywell Aerospace Andy Statham, +44.(0)133.286.9276, [email protected] Elizabeth Strano, +1.724.772.8651, [email protected] David Marcyjanik, +1.724.772.7113, [email protected]

Task Group Members

Subscriber Voting Members (UVM)

Airbus Tony Warren Lockheed Martin Corporation Luis Grijalva Airbus Helicopters Philippe Beck Mitsubishi Heavy Industries Hideki Nakama BAE Systems – MAI (UK) Chris Dootson Alternate: Yoshiharu Kuze Bell Helicopter Textron Ed Hohman MTU Aero Engines AG Juergen Burchards Alternate: Thomas Mike Guinn Alternate: Dr. Hans-Hermann Kopp The Boeing Company Peter Torelli Northrop Grumman Corporation Steve Bauer Alternate: Robert Reynolds Alternate: Greg Hall Alternate: Louis Truckley Parker Aerospace Group Dale Norwood Bombardier Inc. Bobby Scott Alternate: Gary O’Neill COMAC Jinqiu Zhou Pratt & Whitney Dave Royce Atlernate: Jianfei Feng Alternate: Jim Fowler Eaton, Aerospace Group Steven Garner Pratt & Whitney Canada Frédéric Girard Alternate: Staci Patterson-Bright Alternate: Pascal Brassard Finmeccanica S.p.A. – Helicopter Division Luigi Merletti Premium Aerotec Peter Bartsch Alternate: Fabrizio Montagnoli Raytheon Co. Donald MacLean Finmeccanica SpA - Settore Aeronautica Giacomo Maione Rockwell Collins Scott Wegener Atlernate: Vittoria Pianese Rolls-Royce Christopher Stevenson GE Aviation Harry Hahn Alternate: Jim Graves GE Avio S.r.l. Massimo Colombo SAFRAN Group Alain Bouchet General Dynamics / Gulfstream Aerospace Mitch Birzer Alternate: Dominique Tomasso Alternate: Kurt Ruoff Sikorsky Aircraft Mike Clark Héroux Devtek Inc. Walter Tonizzo Spirit AeroSystems Jim Winter Alternate: Marc-André Lefebvre Textron Aviation Justin Payne Honeywell Aerospace Steve McCool Alternate: Michael Daehling Alternate: Fangmei Chu Triumph Group Sean Wood Alternate: Robert Hogan UTC Aerospace (Goodrich) Rich Costantino Alternate: Scott O’Connor Alternate: Robert Rainone Alternate: D. Scott Sullivan UTC Aerospace (Hamilton Sundstrand) Michael Mitchell Alternate: Pat Thompson Alternate: Scott Iby Israel Aerospace Industries Uri Sol Alternate: Victor Schonberger 35

NONDESTRUCTIVE TESTING (NDT)

PRI Staff Engineer Contacts: Task Group Leadership: Mark Aubele, +1.724.772.8654, [email protected] Chairperson: Dave Royce, Pratt & Whitney Phil Ford, +44.(0)144.322.5545, [email protected] Vice Chairperson: Tony Warren, Airbus Mike Gutridge, +1.740.587.9841, [email protected] Secretary: Steve McCool, Honeywell Aerospace Andy Statham +44.(0)133.286.9276, [email protected] Elizabeth Strano, +1.724.772.8651, [email protected] David Marcyjanik, +1.724.772.7113, [email protected]

Task Group Members, continued

Supplier Voting Members (SVM)

Alcoa (ATI) – Division Paul Rose Kalistrut Aerospace Nathalie Crozat-Vigier Alcoa Forgings and Extrusions Paul Johnson LISI Aerospace Richard Gasset Alternate: Mark Pennington Alternate: Savas Ulucan Alcoa Howmet William McKessy Meyer Tool, Inc. Grant Lilley Alcoa Titanium and Engineered Products Alban Bakia Mitchell Laboratories Inc. David Gray Alloy Processing Inc., PCC Aerostructures Jeff Jones Northstar Aerospace Chicago Inc. Michael Steele Aubert & Duval Claude Chambon Otto Fuchs K.G. Bernd Spelsberg Bohler Edelstahl GmbH & Co KG Josef Maier Altnernate: Jens Kiehn Alternate: Rene Krenn Orbit Industries Gary White BYTEST SRL Stefano Pasquino Paradigm Precision John Massie Composite Inspection Solutions David Mitchell PCC Structurals Inc. LPC Christopher Andersen Doncasters Andrew Dunbabin Alternate: Curt Powell E. M. Inspection Co Ltd. Andy Bakewell Precision Castparts Corp. Blair James O’Connell Element Materials Technology Julie Nguyen RBC Aircraft Products Inc. Nathan Gangloff Alternate: Douglas Davies Robert Stuart Ltd. Mark Airey Exova (UK) Limited Jonathan Pugh SPS Aerostructures LTD. Graham Buswell Alternate: Martyn Bills Timken Aerospace Zachary Medeiros FACC Helmuth Hoeller West Penn Testing Group N. David Campbell Hexcel Corporation Mike Ashton Alternate: Mark Pompe Hitco Carbon Composites D.E. “Skip” McDougall Wyman Gordon Shawn Ballou James Fisher NDT Paul Evans X-Ray Industries Inc. Douglas Barra Jorgensen Forge Corp Steve Radelich

NON METALLIC MATERIALS MANUFACTURING (NMMM)

The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes:

x Resin Manufacturing x Prepeg Manufacturing x Adhesive Manufacturing

Subscriber Voting Members (UVM)

Airbus Javier Garcia-Baeza Finmeccanica SpA - Settore Aeronautica Michele Losito Alternate: David Constable GE Aviation Andreas Mastorakis Alternate: Muriel Malhomme Alternate: Douglas Armstrong Airbus Helicopters Achim Enzmann Gulfstream Aerospace Ron Kramer Alternate: Olivier Goupillon GKN Aerospace Richard Perrett BAE Systems – MAI (UK) Brett Hemingway Honeywell Aerospace Monica Alcala Alternate: Steve Grunshaw Alternate: James Cobb Bell Helicopter Textron John Key Jr. Alternate: Leah Markowitz Alternate: Elliott Schulte Lockheed Martin Corporation Keith Panuska The Boeing Company Lance Loeks Raytheon Company Randy Armstrong Alternate: Adam Dalesandro Rolls-Royce Tara Campbell Alternate: Joseph DeVirgilio SAFRAN Group Laura Benedetti Alternate: Frank Lennert Alternate: Patrick Dunleavy Bombardier Inc. Anne Stanley Sikorsky Aircraft Xiaohang Mike Song Alternate: Mario Simard Spirit AeroSystems Kevin Dowling Cessna Aircraft Company Tawny Blumenshine Alternate: Justin Walker Alternate: Jeremy Phillips Triumph Group Sally Spindor COMAC Ping Chen Alternate: Minh Quan Alternate: Yuhui Yuan

Supplier Voting Members (SVM)

Avcorp Industries Inc. Vitorio Stana Park Aerospace Technologies Corp. Frank Alberto Cytec Solvay Group Steve Schrameyer Alternate: Rick Price Euro-Composites Arno Toelkes Renegade Materials Corporation Douglas Jacques Exova (UK) Limited Natalia Becerra Pozo Toray Carbon Fibers America Inc. Nancy Vancil GKN Aerospace Toray Composites America Inc. Colleen Saunders Alternate: Sue Lauer Alternate: Jay Berndt Hexcel Corporation Jim Brown Alternate: Don Russell Alternate: Roy Redmond Orbital ATK – Aerospace Structures Division Karen Quinn Alternate: Bryan Loveless

NON METALLIC MATERIALS TESTING (NMMT)

The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer

x Mechanical Testing x Chemical Testing x Flammability Testing x Physical Testing x Thermal Testing

Subscriber Voting Members (UVM)

Airbus Javier Garcia-Baeza GE Aviation Andreas Mastorakis Alternate: David Constable Alternate: Douglas Armstrong Alternate: Muriel Malhomme GKN Aerospace Richard Perrett Airbus Helicopters Achim Enzmann Gulfstream Aerospace Ron Kramer Alternate: Olivier Goupillon Honeywell Aerospace Monica Alcala BAE Systems – MAI (UK) Brett Hemingway Alternate: James Cobb Alternate: Steve Grunshaw Alternate: Leah Markowitz Bell Helicopter Textron John Key Jr. Lockheed Martin Corporation Keith Panuska Alternate: Elliott Schulte Northrop Grumman Corporation Larry Olsen The Boeing Company Lance Loeks Raytheon Company Randy Armstrong Alternate: Adam Dalesandro Rolls-Royce Tara Campbell Alternate: Joseph DeVirgilio SAFRAN Group Laura Benedetti Alternate: Frank Lennert Alternate: Patrick Dunleavy Bombardier Inc. Anne Stanley Sikorsky Aircraft Xiaohang Mike Song Alternate: Peter Bonarrigo Spirit AeroSystems Kevin Dowling Alternate: Mario Simard Alternate: Justin Walker Cessna Aircraft Company Tawny Blumenshine Triumph Group, Inc. Sally Spindor Alternate: Jeremy Phillips Alternate: Minh Quan COMAC Ping Chen Alternate: Yuhui Yuan

Supplier Voting Members (SVM)

Applus Laboratories Luis Guelbenzu Hexcel Composites Ltd. Jim Brown Avcorp Industries Inc. Vitorio Stana Alternate: Stephen Davies CETIM Arnaud Bonnet Alternate: Roy Redmond Cincinnati Testing Labs Paul Braun IMR Test Labs William DeLaurier Alternate: Dennis Kidd Orbital ATK – Aerospace Structures Division Bryan Loveless Critt-Materiaux MPC Nicolas Vetel Alternate: Karen Quinn Cytec Solvay Group Steve Schrameyer Park Aerospace Technologies Corp. Frank Alberto Element Hovhannes Soukiassian Alternate: Rick Price Alternate: Tim Esau Renegade Materials Corporation Douglas Jacques Exova (UK) Limited Natalia Becerra Pozo TITANIA, Ensayos y Proyectos Industriales Pedro Astola Gonzalez GKN Aerospace Alternate: Sue Lauer Toray Carbon Fibers America Inc. Nancy Vancil Toray Composites America Inc. Colleen Saunders Alternate: Don Russell 38

SEALANTS (SLT)

The Sealant Task Group is conducting three types of audits for Nadcap accreditation:

1) Sealant Manufacturers: AC7200/1 – Assessment of a sealant manufacturer’s ability to provide a product that conforms to sealant specifications and customer requirements 2) Value-Added Sealant Distributors: AC7202 - Assessment of a sealant repackager’s ability to provide sealant in a final package which include can kits, injection kits, pre-mixed and frozen (PMF), one-part cartridge, and PMF seal caps that conforms to sealant specifications and customer requirements 3) Sealing of Aerospace Assemblies and Components: AC7129 – Assessment of an organization’s ability to apply sealant on aerospace parts that conforms to process specifications and customer requirements

PRI Staff Engineer Contacts: Task Group Leadership: Keith Purnell, +1.724.772.8685, [email protected] Chairperson: Kent DeFranco, Lockheed Martin Corp.

Task Group Members

Subscriber Voting Members (UVM)

Airbus Defence and Space Norberto Roiz-LaFuente Bombardier Inc. Mario Simard Embraer SA Ricardo Bove General Dynamics Corp. Raj Nagarajan Honeywell Aerospace Manuel Koucouthakis Lockheed Martin Corp. Kent DeFranco Alternate: Jerry Brown NAVAIR Diane Kleinschmidt Pratt & Whitney Melissa Facas US Air Force Michelle Barga Alternate: Alan Fletcher UTC Aerospace (Goodrich) Alternate: Angelina Mendoza

Supplier Voting Members (SVM)

3M Company Aerospace and Aircraft Maintenance Department Suzanna DeMoss Alternate: Jonathan Zook Chemetall GmbH Ronald Hendriks Cytec Solvay Group Jeff Steele Flamemaster Corp. Alternate: Josh Mazin Graco Supply Company Randy Wilt Alternate: Clarlene Lenderman Integral Products Inc. John Lane NSL Aerospace Jim Carney Packaging Systems Inc. David Nickerson PPG Aerospace/PRC DeSoto Intl. Philip Shackley Alternate: James Trainer

WELDING (WLD)

Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: x Additive Manufacturing x Laser Welding x Evaluation of Welds x Diffusion Welding x Percussion Stud Welding x Electron Beam Welding x Resistance Welding x Flash Welding x Torch/Induction Brazing x Friction/Inertia Welding x Welder/Welding Operator x Fusion Welding Qualification

PRI Staff Engineer Contacts: Task Group Leadership: Ian Simpson, +44.133.286.9272, [email protected] Chairperson: Steve Tooley, Rolls-Royce Mike Gutridge, +1.740.587.9841, [email protected] Vice Chairperson: Holger Krueger, Airbus Gabe Kustra, +1 724-772-8673, [email protected] Secretary: Chris English, GE Aviation Alternate Secretary: Les Hellemann, GE Aviation

Task Group Members

Subscriber Voting Members (UVM)

Airbus Holger Krueger Northrop Grumman Corp. William Fitzgerald BAE Systems – E & I Karen Dannis Alternate: Gary Winters BAE Systems – MAI (UK) Bob Fletcher Parker Aerospace Osawonuyi Agbonkonkon Alternate: Andrew Dewhurst Alternate: Brandon Beasley The Boeing Company Michael Irvin Pratt & Whitney Dag Lindland Alternate: Gary Coleman Alternate: Peter Lang Alternate: Larry Hamanishi Raytheon Company Lyle Morris Bombardier Inc. Mario Leclerc Alternate: Brian Ricks Alternate: Caroline DesLandes Rockwell Collins Inc. Paul Slater Alternate: Hugh Jamison Alternate: Dave Dvorsky Cessna Aircraft (Textron Aviation) Saeed Cheema Rolls-Royce Steve Tooley Finmeccanica SpA - Settore Aeronautica Marco Luigi Poletto Alternate: Andy Toth GE Aviation Chris English SAFRAN Group Valere Henry Alternate: Les Hellemann Alternate: Cedric Colas GKN Aerospace Jerry Hulin Spirit AeroSystems Tommy Howland GKN Aerospace Sweden AB Joakim Carlsson Alternate: Craig Clasper Gulfstream Aerospace Brian P. Harvey Triumph Group Rodney Holt Honeywell Aerospace Milan Hanyk UTC Aerospace (Goodrich) Scott Maitland Alternate: Robbie Adams UTC Aerospace (Hamilton Sundstrand) Joel Mohnacky Lockheed Martin Corporation Robert Gilbert Alternate: Scott Iby Mitsubishi Heavy Industries Hirohiko Hattori Atlernate: Mitsuharu Kuya MTU Aero Engines AG Ralph Kropp Alternate: Gerhard Westenrieder

Supplier Voting Members (SVM)

Advance Welding Christopher Kielb Ducommun AeroStructures James Ahlemeyer Alternate: Melinda Mitton Meyer Tool, Inc. Grant Lilley Alcoa Power and Propulsion James A. Olejarczyk PAKO, Inc. Jackie Sternot Alternate: Jack Winteringham Alternate: David Osenar Barnes Aerospace Angelo Monzo PCC Structurals Inc. Christopher Webb Alternate: Gigi Streeter Voss Industries Inc. Mike Schleckman 40