& Safety

FiberFish Pulling Rods GlowFish Pulling Rods This fiberglass non-conductive rod The GlowFish “Glow in the Glows in is excellent for pulling telephone, the Dark! Dark” luminous fiberglass thermostat, alarm Romex and rods are easily visible in dark communications wire. Purchase a areas like attics, crawlspaces, kit, or create the configuration you basements and drop ceilings. need for every installation project. GlowFish is stored in a clear From BES Manufacturing. case, allowing it to remain “charged” and ready to use. Features rugged 8-32 connectors and is available in two diameters, 3/16" and the more flexible 5/32". Many individual attachments Most popular kit is and kits are available. From BES Manufacturing. the FIB 107 Call for more detailed information on GlowFish or FiberFish products. FiberFish Part No. Rod Length (ft) Description ® FIB103 6 FiberFish with two tips Gopher Pole FIB104 3 Two FiberFish rods with two tips Telescopic Wire Installation This self-contained, rigid fiberglass FIB106 6 FiberFish - no tips push-pull tool telescopes from 4' to FIB107 6 FishKit - four rods in case 22', and is lightweight and easy to FIB108 3 FishKit - six rods in case carry. The combination hook/skid FIB110 3 Bullnose/Female rod (no tip) tip glides over rafters, suspended FIB113 6 Male/Female rod ceilings, through crawl spaces, over long spans and FIB114 3 Bullnose/Female rod other difficult areas to extend or retrieve wire. Attach wire to install, then simply extend a section Cable Tray Kit (eight rods and a Wisp FIB148 6 Head FIB122) Designed for running wire until the snap/lock button snaps securely in place. in cable trays Extend additional sections until you reach the point you desire. No loose parts to fit together or assemble. From Crain Enterprises. FiberFish II One year warranty. Part No. 90520 Part No. Rod Length (ft) Description FIB203 6 Bullnose/Bullnose rod FIB206 - Replacement rod Bullnose/Female Wire-Mesh Pulling Grips FIB207 6 FiberFish II kit - five rods in case For pulling overhead or underground cable, stringing service or communications lines into buildings, and for FIB208 3 FiberFish II kit - eight rods in case pulling wire through conduit and general underground FIB210 6 Male/Female rod constructions. Light- to heavy-duty models available. FIB214 3 Bullnose/Female rod From . Call for details. FIB215 3 Male/Female rod FIB221 18" Flex-Fish (use with FIB220 attachments) FIB223 10 Fish chain and magnetic retriever “Haven” Grips Expandable carrying case - 5' Designed for use when light, compact CAR57 8 collapsed, expands to 8' grip is desired and where conductor damage is not a factor. Gripping Attachments available. Call for details. pressure of the knurled jaw is applied to 1/4" cable area. From Klein Tools. Min. Max. Max. Part No. Description O.D. (in) O.D. (in) Safe Load (lbs)

160410 for rural distribution .06 .25 2,500 160420 for distribution wire .125 .5 5,000

I-1 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Chicago® Grips The Wee Buddy® Custom finished to your cable For fishing conduit as small as 1/2". specifications. Designed for hollow Use for inside wiring jobs in occupa- conductors and other large diam- tional conduit, where a flat tape tends eter cables, round jaws are shaped to wind around existing wire or cable. to provide maximum contact with the circumference of Part No. 81850 - 50' the cable. From Klein Tools. Part No. 818100 - 100' Part No. Min. O.D. (in) Max. O.D. (in) Max. Safe Load (lbs) Part No. 818150 - 150' 162816P .31 .88 15,000 Part No. 818AK - Accessory/repair kit

The Little Buddy® For fishing conduit as small as 3/4". Use Bell-System Type Grips for telephone, interconnects, computer For gripping bare uninsulated network, electrical cable and wire pull- galvanized steel messenger and ing. Supplied with accessory/repair kit. guy strand when tensioning. Part No. 10316150 - 150' Equipped with chain, toggle and Part No. 10316200 - 200' shackle. From Klein Tools. Part No. 10316250 - 250' Part No. 10316300 - 300'

Part No. Min. O.D. (in) Max. O.D. (in) Max. Safe Load (lbs) The Good Buddy® 16845AT .218 .55 8,000 For rodding 2" to 4" conduit. 3/8" outside 162816AT .310 .62 15,000 diameter. Foot and meter markings available. Collapsible frame to facilitate use in small areas like manholes. For gripping Figure-8 cable insulated Supplied with accessory/repair kit. 1/4" messenger strand when tension- Part No. 925400 - 400' ing. Serpentine jaws grip strand jacket without slippage or damage. Good Buddy® II Equipped with chain, toggle and Handles larger jobs than the Goody Buddy – up to shackle. From Klein Tools. 600'. 3/8" outside diameter. Foot and meter markings Part No. Min. O.D. (in) Max. O.D. (in) Max. Safe Load (lbs) available. Supplied with accessory/repair kit. Part No. 11A25400 - 400' 16595AT .2 .37 5,000 Part No. 11A25500 - 500' Part No. 11A25600 - 600'

Conduit Rodders Good Buddy® III Low-profile frame and versatile horizontal or vertical The Easy Buddy® operation. 3/8" outside diameter, 1,000 lb. pull strength. For fishing conduit as small as 1/4". Supplied with accessory/repair kit. Designed to handle tight turns and Part No. 9A25300 - 300' long runs. Part No. 9A25400 - 400' Part No. 614300 - 300' Part No. 614400 - 400' The Big Buddy® Part No. 614AK - Accessory/repair kit For rodding 4" or larger. For use in underground duct from manhole to manhole and manhole to subsidiary ducts. Part No. 1138500 - 500' Part No. 1138600 - 600' Part No. 1138800 - 800' Part No. 11381000 - 1,000' Part No. 1138RK - Accessory/repair kit

www.ptsupply.com I-2 [email protected] 800-238-7514 Tools & Safety

Fish Tape Collapsible Cable Caddy • Designed to fold up when lifted - with Tuff-Grip™ or without the cable reel installed • 100' S-Class® with eyelet • Allows for easy storage • Non-slip handle and fingertip groove- • Maximum rated load of 200 lbs. provide a secure grip From Cablematic/Ripley Tools. • Oversize handle opening accom- Part No. CCDCL modates large, gloved hands; increases stability for better winding control • Non-conductive fiberglass/nylon Staple Gun Part No. 31063 Bottom-load magazine for drop-in loading. Reload clip stays attached Zoom™ Fish Tape - no more lost parts. Unique safety grip, Features a braided stainless steel core jamless design. Lifetime warranty. and ultra hard polyamide resin jacket. From Acme Staple. Optimized for use in conduit runs with Maximum difficult cable placement character- Staples leg Wire/Cable istics such as multiple bends, elbows Part No. Length (in) Dia. (in) Commonly Used For and junction boxes. Has the capability 18A 7/16 3/16 Alarm and security wires to deliver true omni-directional pushing performance. 25A 7/16, 9/16 1/4 Telecommunications Solid steel eyelets hydraulically pressed onto the 37A 3/8, 1/2, 9/16 3/8 Cat 3 Coax and Coaxial cable radial core provide a steel-to-steel bond with a tensile 75A 5/8, 7/8 1/2 NM building wire strength of 750 lbs. 25AC 19/32 1/4 Cat 5 and up Part No. 31090 - 50' Part No. 31092 - 100' 37AC 19/32 11/32 Cat 5 and up Part No. 31096 - 200' Staples sold separately.

T-255 Cable Caddies Punchmaster II - Turn-Lock™ Tools For use in paying out drop cable The Punchmaster tools have an impact during customer installations. Made absorbing cushioned grip to reduce opera- of sturdy steel tubing or for durability tor stress for high volume installers. and painted utility orange. From Adjust actuation setting to accommodate Lemco. termination requirements or operator preference. From . Part No. Max Reel Size (D" x W") Capacity (lbs) Weight (lbs) Part No. 35485 - Tool with 110 T253 18 x 16 200 7 Part No. 35487 - Tool with 66 blade T254 18 x 16 200 8 T255 26 x 15 170 11.2 JackRapid™ Punchdown Tool T258 18 x 15-1/4 & 15-1/4 x 14 200 18.6 An innovative and time-saving tool which is easy to handle, the JackRapid seats and cuts all wires at once, saving Lightweight Cable Caddy up to two minutes of installation time • Folds up for easy handling per jack. • Supports up to 300 lbs Part No. 10059620 - Designed for • Holds up to 20" x 16" reels Leviton jack models 5G110 and 61110 • Made of 3/4" galvanized tubes Part No. 2323811 - Designed for Leviton jack models • Lightweight: 6 lbs. 41106, 41108 and 5G108 From CablePro. Part No. CC2016

I-3 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Termination Tool Scotchlok™ Crimping Tools D814 Engineered to provide high mechanical advantage The D814 impact tool enables resulting in less operator fatigue. Each tool is designed installers to vary the impact setting to meet specific craftsperson requirements. From 3M. and use a variety of interchangeable (with extra blade storage in the The E-9C handle). From Fluke Networks. Fast, efficient splicing Part No. 10055000 • Automatic cartridge feed (7-to-1 mechanical advantage and ratchet D814 Replacement Blades action), allows crimp completion with one Part No. 10979002 - DBlade case (empty) hand Part No. 10176000 - 110/88 blade • One squeeze of the handle crimps the Part No. 10465001 - 3M system “D” bit connector and ejects it, automatically advancing Part No. 10056000 - 66 blade another connector into the crimping position Part No. 10665000 - Northern Telecom BIX system • The 10-, 12- or 16-connector cartridge is easily inserted into the E-9C tool • Use for aerial, pedestal, underground, and direct Modular Plug Crimp Tool buried applications Ratcheting Crimp Tool for RJ-11 & RJ-45 Modular Plugs. The E-9BM Combination Crimp Tool 4, 6, 8 Universal Connector Crimping and 8 keyed. Not recommended for Amp plugs. From • Parallel closing action and adjustable Quest Technology. jaws allow it to handle all wire gauges Part No. TEL6011 • Individual feed • For use with all Scotchlok™ connectors • 10-to-1 mechanical advantage Ratchet Crimp Tool Long life full cycle ratchet mecha- The E-9Y nism. High quality steel construc- For two conductor splicing tion. Quick release. Insulated • Stepped jaws and a long nose provide handle. From Quest Technology. parallel crimping action (10-to-1 Part No. TFC4010 - Deluxe for RG6 and RG59 mechanical advantage) • Features include a side wire cutter, insulated handles and a return spring Crimp Tool • Use for two conductor splicing on conduc- The parallel jaws assure even tors less than 19 AWG pressure, and the handles will not release until a full crimp has been The E-9R made. RB connectors may be ordered with a mylar • Crimps all 3M Scotchlok IDC lining or with grease filling. Weighs 1-1/2 lbs. From Connectors (3-to-1 mechanical Electro Appliance. advantage) Part No. P8533 • Wire cutter with replacement blade is incorporated into the tool • For use on 26 AWG copper wire to 19 AWG copper wire • Ratcheting mechanism with safety release • No field adjustments • Easy maintenance and cleaning • Parallel crimping action • Lightweight and ergonomic • Minimum 50,000 cycle life

www.ptsupply.com I-4 [email protected] 800-238-7514 Tools & Safety

Pro-Tool™ Kits Coax Multi-Purpose Tool Professional tools to cut, strip, clean Cuts, strips and crimps RG-59 and connect network phone and data and RG-6 coax cable, eliminating lines to blocks and jacks, the need for professionals to carry all in one pouch and even upside separate tools for RG-59 and RG-6 cable terminations. down. The molded design of the Features three precision-ground stripping holes that pouch ensures a tight grip on the accurately strip the outer jacket and inner insulation. tools. From Fluke Networks. 8-1/2" long. From Klein Tools. Lifetime warranty. Part No. 1008 IS60 Kit • D914S impact tool • Mini Maglite® • 's D- • EverSharp 66/110 blade Easy Stripper/Compress Tool • Cable stripper • Dur-a-Grip pouch Accommodates a broad range of Part No. 112293000 popular cable groups. Additional interchangeable stripping cartridges IS50 Kit can be stored in the tool itself. • D914S impact tool • EverSharp 66/110 blade Features a long lasting • Electrician’s D-snips • Dur-a-Grip pouch blade molded from highly visible durable Delrin. 8700 • Cable stripper ES strips RG-59/6 to a 1/4" x 1/4" prep. Part No. 11292000 Part No. 8700ES

IS40 Kit Additional tools in the 8700 series include: • D814 impact tool • Probe pic 8710 ES strips RG-7/11 to a 1/4" x 5/16" prep. • Electrician's D-snips • EverSharp 66/110 blade Part No. 8710ES • Cable stripper • Dur-a-Grip pouch Part No. 11291000 8720 ES strips RG-59/6 and RG-7/11. Part No. 8720ES IS25 Kit • Electrician's D-snips • Mini Maglite® • Cable • Dur-a-Grip pouch Electrician’s Part No. 11295000 Designed for heavy-duty use. Strong, tough, tempered steel. IS15 Kit Nickel-plated finish. Scraper and • Electrician's D-snips • Dur-a-Grip pouch file on outside of both blades. • Cable knife Sharp points. Screw hinge permits adjustment. From Part No. 11296000 Klein Tools. Part No. 21005

919 Coax Cable Cutter/Stripper/Crimper Scissors with Stripping Notches Cut, strip and crimp RG-6/59 Similar to No. 2100-5, but with cable with one tool. lower blade serrated to minimize • Easy, three-step instructions slippage of wire when cutting. printed on tool Upper blade has notches for strip- • Long, curved cutter requires less effort to cut wire ping 19 and 23 AWG wire. Rounded points. 5" length. and insulation From Klein Tools. • Tough steel construction coated in black oxide Part No. 21007 • Air pocket comfort grip handles From . Part No. 919

I-5 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Splicing 1-3/4" long coping type blade. From Crimping Klein Tools. Part No. 44200 6" Connector Crimping Pliers crimps and seats UG, UR and UY connec- 1-5/8" long coping type blade. From tors, induction hardened cutting Ripley Tools. Part No. 46112 knives, hot-riveted joint, plastic-dipped handles. From Klein Tools. Part No. D2346 Cable Splicer’s Kit Contains knife (No. 44200), electrician’s scissors (No. 21007) and Diagonal-Cutting Pliers slotted leather holder for belts up to 8" Diagonal-Cutting Pliers feature 2" wide. Dimensions: 2-1/8" x 7-1/2". high-leverage, standard-bevel From Klein Tools. cutting knives, with hand-form Part No. 46037 style plastic-dipped handles. From Klein Tools. Part No. D2288

Insulated Cable/Lineman's Skinning Knife Slip-Joint Pliers Plastic handle. Tempered 3" steel Nickel-chrome plated, shear-type blade with the blade back ground wire cutter, two jaw positions, flat for scraping copper wire. From knurled handles. Part number Klein Tools. with the letter D indicates that pliers are furnished Part No. 15703 with plastic-dipped handles designed for comfort. From Klein Tools. Part No 5116 - 6" Part No D5116 - 6" plastic Knife & Scissors Sharpener Part No. 5118 - 8" Part No. D5118 - 8" plastic Combination knife and scissors Part No. 51110 - 10" Part No. D51110 - 10" plastic sharpener. High grade, tungsten carbide inserts sharpen both sides of the blade at the same time. Tongue & Groove Pliers Restores knife edge in three or four High carbon C1080 steel pliers strokes. Built in finger guards. with comfort grips. Right-angle, From Klein Tools. laser heat-treated teeth. Patented Part No. 48036 SAFE-T-STOP® feature prevents finger pinch. Undercut tongue and groove won't slip. PermaLock® fastener eliminates nut and bolt failure. Lower jaw Side-Cutting Pliers combines with expanded reinforcing rib to prevent 9-1/4" Side-Cutting Pliers - high- handles from contacting each other. leverage, smooth, streamlined nose • Plier 430CB - Code Blue® comfort grips w/knurled jaws, plastic-dipped handles. From Klein Tools. • Plier 442 - V-shaped jaws to offer more points of Part No. D2139NE contact on round stock and tubing From Channellock. Overall Jaw No. Jaw Heavy-Duty Cable Shears Part No. Length (in) Length (in) of Adj. Capacity (in) Designed to cut copper, steel, 420.1 9.5 1.12 5 1.50 ACSR and most hardened wire. 426 6.5 .81 5 .87 Heavy-duty tempered steel blades are made of high quality steel for long service. Unique 430 10.0 1.38 7 2.00 triangular-jaw design will cleanly cut cable without 440 12.0 1.50 7 2.25 compression or frayed ends. From Klein Tools. 460.CHANN 16.5 2.56 8 4.25 Part No. 63016 442 12.0 2.50 7 2.25 430CB 10.5 1.38 7 2.00

www.ptsupply.com I-6 [email protected] 800-238-7514 Tools & Safety

Cable-Sheath Splitting Knife Long Nose Pliers Lightweight for opening lead 318 High carbon C1080 steel pliers cables, cutlery steel blade, - with comfort grips feature an shaped edge, hammer head on electronic coating to prevent rust, back. 7-3/8" length. From Klein Tools. a crosshatch pattern on jaws plus knife- and anvil- Part No. 1515S style, laser-treated cutting edges. • Plier 318 - Heavy-duty side cutter and crushing area • Plier 318S - Same features as 318, plus a 12-14 Retractable AWG wire stripper • Curved handle design with non-slip grip From Channellock. • Retractable blade locks in 3 positions Overall Jaw Nose Nose Thick. • Includes one heavy-duty blade and stores up to Part No. Length (in) Length (in) Width (in) (in) 10 blades in handle 317 8.00 2.36 .14 .11 From Klein Tools. 326 6.10 2.08 .10 N/A Part No. 44107 318 8.38 2.30 .16 .11 318WS 8.38 2.30 .16 .11 Journeyman™ Side Cutting Pliers Comfort grip handle; high-leverage Journeyman™ Heavy Duty design for 46% greater cutting and Long Nose Pliers gripping power; hot-riveted joint Side Cutting and Stripping; com- for smooth action and no handle wobble; induction- fort grip handle; hot-rivoted joint hardened cutting knives for long life. for smooth action and no handle Part No. J2139NE - 9" Plier wobble; induction-hardened cutting knives for long life. Part No. J20009NE - 9" Heavy duty plier; cuts ACSR, Part No. J2038 screws, nails and most hardened wire

Lineman's Pliers ™ Journeyman Connector 348 High carbon C1080 steel pliers Crimping Pliers with comfort grips feature an Heavy-duty cutting; comfort grip electronic coating to prevent rust, handle, cuts ASCR, screws, nails crushing area and knife- and anvil-style, laser-treated and most hardened wires; crimps cutting edges. connectors, lugs and terminals; induction-hardened • Plier 348 - Round-nose design cutting knives for long life. • Plier 349 - Wiremaster™ premium-quality, high- Part No. J20009NECR leverage tool with heavy-duty, enclosed joint design; cuts ACSR • Plier 369 - High leverage, round-nose design; cuts Journeyman™ Fish Tape Pulling Pliers ACSR Heavy-duty cutting; comfort • Plier 369CB - Same features as 369, plus Code grip handle, cuts ASCR, screws, Blue® comfort grips pulls flat steel fish tape without • Plier 369CRFT - Same features as 369, plus 12 damaging the tape; cuts ASCR, screws, nails and most AWG wire stripper, 12 AWG wire looper and fishtape hardened wires; induction-hardened cutting knives for puller long life. From Channellock. Part No. J20009NETP Overall Jaw Cutting Nose Part No. Length (in) Length (in) Edge (in) Width (in) 348 8.50 1.28 .65 .36 349 9.25 1.59 .81 .40 369 9.50 1.54 .73 .28 369CB 10.00 1.54 .73 .28 369CRFT 9.50 1.54 .73 .29

I-7 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

436/437 Cutting Pliers Bolt Cutters with Steel or Fiberglass 437 High carbon C1080 steel pliers Handles with a box joint design. Strong, lightweight, general-purpose cutters in six • Electronic coating prevents rust sizes to 42". From Klein Tools. • Knife- and anvil-style, laser-treated cutting edges Overall Overall • Crushing area Part No. Length (in) Part No. Length (in) • Comfort grip handles 63314 14 63118 18 • From Channellock. 63318 18 63124 24 Part No. 436 - 6" diagonal cutting plier 63324 24 63130 30 Part No. 437 - 7" cutting plier Fiberglass

Steel 63330 30 63136 36 63336 36 447 Cutting Pliers 63342 42 7-3/4" High carbon C1080 steel pliers with a lap join design and curved diagonal for maximum Klein-Kurve™ pulling leverage. Two Klein-Kurve™ wire stripper/ • Perfectly mated, heat-treated cutters cutters designed with longer, • Comfort grip handles double-dipped comfort grips and From Channellock. curved handles. These lightweight, Part No. 447 multiple function tools can cut, strip, loop and gauge both stranded and solid wire, plus cleanly shear 6-32 and 8-32 screws. From Klein Tools. 911 Cutting Pliers Part No. Strips Solid AWG Gauges Strips Stranded AWG Gauges Heavy-duty, 9" high carbon 11055 10-18 12-20 C1080 steel cutters with carefully balanced, broader 11057 20-30 22-32 handles for better leverage and extra comfort. • Cuts up to 4/0 aluminum and 2/0 soft copper - not Kinetic Super™ Wire Strippers designed for steel or ACSR cable • Ergonomically engineered design • Closely mated, heat-treated cutters cradles your hand and reduces • Comfort grip handles muscle fatigue From Channellock. • Molded grip of Santoprene® Part No. 911.CHANN • Thumb-Valley™ thumb guide promotes comfort while focusing kinetic energy for faster wire stripping Journeyman™ Cable Cutters • Shear-Cut™ bolt cutters slice easier and cleaner High-leverage; comfort grip From Ideal Industries. handle; cuts up to 4/0 aluminum, Part No. 45715 - 10-18 AWG Solid 2/0 soft copper and 100 pair 24 Part No. 45716 - 16-26 AWG Stranded AWG communications cable (not Part No. 45718 - 8-16 AWG Stranded for steel or ACSR); precision, one hand shearing action. Part No. J63050 DCS Drop Cable Slitter Slits the web on 59, 6, 7 and 11 series messengered and dual cables in the following cable configurations: messengered coaxial drop cable, dual coaxial drop cable, dual coaxial messengered drop cable, dual coaxial and twisted pair cable, dual messengered coaxial and twisted pair cable. From Cablematic/Ripley Tools. Part No. 36340

www.ptsupply.com I-8 [email protected] 800-238-7514 Tools & Safety

UDT Universal Drop Trimmer 2x2 Plus and 4x4 Plus® • Prepares all 59, 6, 7, 11 drop cable Cable End Strippers constructions as per SCTE and • For 600V secondary cable Bellcore spec. • Cutting heads for 6 AWG to 500 MCM con- • One step cable preparation exposes the ductors (concentric/compressed/compacted) center conductor and removes the jacket • Choice of square cut or chamfer cut blades. From Cablematic/Ripley Tools. Call for From Utility/Ripley Tools. Call for details. an ordering matrix.

SDT Single Drop Trimmer WS 5 End Stripper One step cable preparation precisely • For 600V-35KV cables - Strips XLPE, PE exposes the center conductor cleaner and EPR insulation and removes the proper length of • .26" to 1.265" cable O.D. jacket to SCTE and Bellcore specifica- From Utility/Ripley Tools. tions. Tool body constructed of lightweight, impact Part No. 10327 resistant “Hi-Visibility Red” polymer. From Cablematic/Ripley Tools. Model No. Drop Cable Series WS 6 End Stripper • For 15-46KV cables - Strips XLPE, PE and SDT596-250 59/6 Std., Tri and Quad, N48 EPR insulation SDT596-250SS 59/6 Std., Tri and Quad, N48 • .96-1.9" cable O.D. SDT7-250 7 Std., Tri and Quad From Utility/Ripley Tools. SDT11-250* 11 Std., Tri and Quad Part No. 12900 SDT596-250PB 5C SDT11-250PB PRG11, RG11BB3, N71H SDT EUR 59/6 Std., Tri, Quad, N48, Coax 9 WS 49 Airport Lighting Cable End SDT COAX 9 Coax 9 Stripper/Penciller *SDT model supplied with 11 (black) cassette for use on 11 standard • For 1/2" taper cuts of #8, 5 KV L-824 and tri-shield cable and 11Q (gray) cassette for use on 11 quad shield Type C airport lighting cable cable. • End strips 3/4"; pencils 1/2" From Utility/Ripley Tools. RTC Removal Tools Part No. 27700 from Cablematic/Ripley Tools

RT-F716 100 Adjustable Wire Stripper & Cutter • Provides easy access to connec- • Strips and cuts insulated wire tors in high-density locations such as cable racks sizes up to 10 AWG • 7/16" head for F connectors - socket extends 8" from • Effective for stripping fiber optic handle buffer jackets and tubing Part No. 38360 From Miller/Ripley Tools. Part No. 8030030 RT-BNC Removal Tool • Provides easy access to connectors in high-density locations such as cable racks 721 Multi-Wire Stripper/Cutter • Formed head specifically for BNC connectors - Socket • Strips and cuts 20-10 AWG extends 8" from handle wire sizes Part No. 38355 • AWG/mm wire sizes embossed/ printed on tool From Miller/Ripley Tools. Part No. 80564

I-9 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

821 Multi-Wire Stripper/Cutter FO 103-S Fiber Optic Stripper Line • Strips and cuts 26-16 AWG For stripping 250µm buffer coating wire sizes from 125µm optical fiber. Precision • AWG/mm wire sizes embossed/ diameter hole and V-opening in pad printed on tool blade allow for accurate buffer From Miller/Ripley Tools. coating removal. Part No. 8056 From Miller/Ripley Tools. Part No. 80355

957 Multi-Wire Stripper/Cutter • Designed to cut copper wire only 305AN Figure-8 Aerial Self Support • Strips 10-18 AWG solid, 12-20 Duct Slitting Tool stranded wire Messengered removal and jacket • Precision holes for wire stripping slitting tool for round Figure-8 • Lean plier nose pulls and loops wire aerial duct. Heads matched to • Scissor-type blades are precision ground and heat messenger sizes. treated to hold their edge From Miller/Ripley Tools. • Ergonomic handle with comfort grips Part No. 80255 - Slitting Tool From Channellock. Part No. 80235 - replacement Part No. 957 blades

959 Multi-Wire Stripper/Cutter/Crimper ACS Armored Cable Slitter • Designed to cut copper wire only Slits the corrugated copper, • Strips 10-22 AWG wire steel or aluminum armor layer • Crimps insulated and non-insu- on Fiber Feeder, Central Tube, lated terminals Stranded Loose Tube fiber optic • Precision holes for wire stripping cables and other armored cable. • Lean plier nose pulls and loops wire Versatile design allows jacket/ • Scissor-type blades are precision ground and heat shield slitting. treated to hold their edge From Miller/Ripley Tools. • Comfort grip handles Part No. 37880.RIPLE From Channellock. Part No. 959 205 Rural “C” Line Wire Slitter & Stripper 909 Crimper • Head matched to wire diameter For precision crimping of dies • Used by major telephone installers and cutters, The Crimper™ is From Miller/Ripley Tools. designed for both insulated and Part No. 80238 - 12 AWG non-insulated solderless connections and terminals on Part No. 80250 - 14 AWG 10-22 AWG wire. Part No. 80235 - replacement blades • Slim nose shape for tight places • Precision made of polished, high carbon, drop-forged steel FOKC Fiber Optic Kevlar® Cutter • Perfectly mated cutters, scientifically heat treated to Designed to cut Kevlar® strength hold their edge members in fiber optic cables • Comfort grip handles From Ripley Tools. From Channellock. Part No. 36495 Part No. 909.1

www.ptsupply.com I-10 [email protected] 800-238-7514 Tools & Safety

103-S Adjustable Wire Stripper/Cutter MK01A Outer Jacket Cable Stripper with Easy Cam Adjustment Designed for precision stripping • Strips and cuts insulated wire of a variety of insulation types sizes up to 10 AWG including rubber, PVC, nylon and • Cam adjusts easily to fit wire cotton. Cuts copper screening of sizes coaxial cables from 8-25mm O.D. From Miller/Ripley Tools. From Abeco/Ripley Tools. Part No. 80315 Part No. 39380

MAXISTRIP® Nut Drivers • Designed for multicore power and Available with cushioned grip in nine different hex lighting cables sizes in both inches and centimeters. Seven piece sets • Strips PVC insulation equipment containing 3/16-1/2" or 5-10mm drivers also available. wires from .5-10mm2 From Klein Tools. Call for an ordering matrix. • Accommodates up to 6 AWG solid or 7 AWG stranded From Abeco/Ripley Tools. Part No. 39405 from Klein Tools

Keystone-Tip Cushion-Grip 1/4" x 4" POWERSTRIP® Heavy-duty, with a round-shank and overall length • Designed to handle PVC insulated of 8-11/32". small cross-sectional wires from Part No. 6024 .25-6mm2 • Accommodates up to 9 AWG solid or #1 Phillips-Tip 10 AWG stranded 3" Shank, Cushion-Grip features a round- • Automatic, self-adjusting stripping shank, Profilated® tip, overall length 6-3/4". action over entire range Part No. 6033 From Abeco/Ripley Tools. Part No. 39400 #2 Phillips-Tip 4" Shank, Cushion-Grip Screwdriver, round-shank, Profilated® tip, overall length 8-5/16". SMART-STRIP Data Cable Stripper Part No. 6034 • Versatile and compact tool suitable for all types of standard insulation • Smart-Strip produces an accurate 1/4" Cabinet-Tip Rapi-Driv® Screwdriver depth of cut to any standard • Crank-action insulated size of wire or cable in handle spins the .75-10mm range screws fast with one hand From Abeco/Ripley Tools. • Tool is premium chrome plated/cor- Part No. 39470 rosion resistant with special heat-treated shafts • Internal flanges inside handle provide solid, twist- resistant blade anchor MK04 Cable Jacket Stripper • Cushion-grip handle • Cable stripper for outer jackets and • Meets or exceeds applicable ASME/ANSI specs. insulation on larger diameter cables From Klein Tools. • Heavy duty construction for Part No. 6716 - Green handle. Red handle also available. industrial environments • Replacement blades available From Abeco/Ripley Tools. Part No. 39376

I-11 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Can 960 Locknut Plier Used to access system interface boxes and outside Designed for quick and easy plant pedestals. One end (with a 3/8" socket) quickly adjustment of 1/2", 3/4", 1", 1-1/4", opens box fasteners and the other (with a 7/16" socket) and 1-1/2" locknuts. Securely can be used on long binding terminals. Each socket is holds and adjusts to most conduit fitting locknuts made 1-1/8" deep; access holes allow for extra torque. of metal, PVC or plastic. • Thin profile for use in confined electrical boxes 68463 • Handle shape allows both right-handed and left- handed use of the tool Corrosion-resistant wrenches are forged from the • Spring loaded handles lock for ease of storage highest quality alloy-steel and nickel chrome plated. From Channellock. • Different size openings on each end of the wrench Part No. 960.CHANN • Ends are offset at 15˚ angle for clearance over obstructions From Klein Tools. Hammers End Opening End Opening from Klein Tools Part No. No. 1 (in) No. 2 (in) 68460 1/4 5/16 Electrician’s Straight-Claw Hammer Designed specifically for use in electrical work. 68461 3/8 7/16 Correctly balanced. Extra long neck, straight- 68462 1/2 9/16 claw and narrow striking face ideal for reach- 68463 9/16 5/8 ing into outlet boxes and other confined areas. 68464 11/16 3/4 Polished, drop-forged, tempered steel head. 68465 13/16 7/8 Shock-absorbent fiberglass handle for strength. 68466 15/16 1 Comfortable, perforated neoprene grip bonded to handle. 14" long, 18 oz. head. Part No. 80718

Adjustable Wrenches Heavy Duty Curved-Claw Hammer • Four-thread knurl and Curved claw gives maximum leverage for pulling nails. non-protruding jaws provide greater capacity Drop-forged, tempered steel head, round and polished. • Minimal head width and thinner jaws improves Fiberglass handle design keeps the head tight. Strong, performance in confined spaces shock-absorbent handle with comfortable, perforated • Longer, precise jaw design grips tight every time neoprene grip. 13" long. • Greater jaw capacity supports larger nuts and bolts Part No. 81816 - 16 oz. head • Code Blue® comfort grip handle Part No. 81820 - 20 oz. head From Channellock. Overall Jaw Joint Joint Heavy Duty Straight-Claw Hammer Part No. Length (in) Capacity (in) Thick. (in) Width (in) Same features as curved claw. 806WCB 6.25 .938 .41 1.97 Part No. 80816 - 16 oz. head Part No. 80820 - 20 oz. head 808WCB 8.00 1.180 .53 2.50 810WCB 10.00 1.375 .60 2.83 Lineman's Double-Face Hammer 812WCB 12.00 1.500 .74 3.42 Designed for pole line work. Well-balanced with the weight to drive lag bolts. Drop-forged, tempered steel head is 3-3/4" long for use in 212 Conduit Plier tight areas. Fiberglass handle has plastic alloy • Right angle teeth grip in all jacket to prevent neck from fraying and splin- directions tering. Neoprene grip handle. 36 oz. head. • High carbon, drop-forged steel Part No. 80936 • PermaLock® fastener eliminates nut and bolt failures Other types of hammers available, • Comfort grip handles including ball peen, hand drilling, Lineman’s From Channellock. straight-claw and soft-face, dead blow types. Part No. 212 www.ptsupply.com I-12 [email protected] 800-238-7514 Tools & Safety

Hack Work-Belt Suspenders from Klein Tools Soft chrome-leather with fully adjustable loops at the end of all three straps to permit use on any width Klein The Heavy-Weight - Die-cast zinc handles. belt (do not use for safety support). Nylon-web and elastic Part No. 70110 - 10" blade back suspenders also available. From Klein Tools. Part No. 70112 - 12" blade Part No. 5413

Dual Purpose /Jab Part No. 701S Leather Tool Pouches

8-Pocket Pouch Torpedo Level Roomy pouch for , service- men and maintenance workers. 5 large utility pockets for a variety of tools. Smaller pockets for screwdrivers and Magnetic base firmly holds the level to iron and steel scratch awls. 12" x 10". surfaces, freeing the user’s hands. Vials are framed Part No. 5178 with glow-in-the-dark material for easy viewing in dimly lit areas. No batteries required. 9" long. Plier/Ruler/Screwdriver Holder From Klein Tools. Part No. S5118PRS - 6-3/4"W x 10"D, slotted Part No. 9319RE Multi-purpose tool pouch Part No. 5164 - Eight pockets, 6-3/4"W x 9-3/4"D. Power-Return Tape Measure 2" wide belt with slotted connection. Features Magnetic Tip For Easier Measuring Allows easier one-person measure- ments. Embossed, nylon-coated, Bucket Tool Organizer steel blade is designed to reduce Fits around a standard 5-gallon wear. Rust-resistant nylon coating bucket. Forty-five pockets of various covers the entire length of the blade. sizes provides quick access to a variety From Klein Tools. of different hand tools. Designed to Part No. 91625RE withstand everyday wear and tear. From Klein Tools. Part No. 5777 Lighted Tape Measure • 25' x 1" blade width and on/off light Tool Tote™ with Shoulder Strap • Rubber comfort grip and 0° level Five interior pockets include: 2 • 1/8" fractional markings large collapsible end pockets and 3 • Uses two AAA batteries (not medium sized pockets. Seven included) exterior multi-tool pockets. From BES Manufacturing. Constructed of rugged, 600 x 300 Part No. 00251 denier polyester to resist wear and tear on the jobsite. 2" wide, 900 lb-test, water resistant. From Klein Tools. Tool Belts Part No. 58888 Klein Tools has a variety of belts to attach tool pouches. Part No. 5201 - Leather utility belt for lightweight tool pouches Part No. 5225 - Fully adjustable poly-web belt Part No. 5415 - 36"-44" heavy-duty extra wide leather belt

I-13 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Canvas Tool Bags The Klein-Lite® Durable bag made of one-piece No. 8 Twin Leg Deceleration Lanyard white canvas covered on the bottom Designed for professionals who and 3" up the sides with Naugahyde, require 100% tie-off. Engineered cemented and lick-stitched. Bottom is so one lanyard leg can always be protected with steel studs and mouth connected to an anchorage point has steel frame. All bags are 6" wide. From Klein Tools. while a working position is being changed. Features an Length Depth Length Depth energy-absorbing inner core of polyester, a nylon-web outer ® Part No. (in) (in) Part No. (in) (in) shell and three drop-forged steel Klein-Lok snap hooks. 510212 12 10 510220 20 15 From Klein Tools. Part No. 87475 510214 14 14 510222 22 15 510216 16 14 510224 24 15 510218 18 14 Deluxe Full-Floating Belt • Latigo-leather body pad has Heavy-Duty Canvas Buckets two pocket tabs Cycolac top rings, some with molded rubber • 5" rolled-edge leather belt cushion bottoms and some with leather bottoms, • Padded for maximum comfort and body fit straight-wall or tapered-wall construction. • 1-3/4" wide leather belt strap reinforced with 4-ply Many to choose from, call for details. From Klein-Kord® Klein Tools. • Full-floating trace with 30° double-bar D-rings From Klein Tools. Call for details. Part No. 5278N Ladder Sack™ Positioning Straps • Adjustable straps are 1-3/4" wide • Made of 6-ply Klein-Kord® for maximum wear, and chemical resistance • Forged single tongue adjustment Simple: Made of durable polyester fabric, the Ladder buckle. Two permanently attached, drop-forged steel, Sack is a tough, flexible shelf that attaches to any double-locking Klein-Lok® snap hooks with 11/16" A-frame ladder to hold your gear. throat opening Effective: Save time by not having to climb up and • Snap hooks and tongue buckles are made of drop- down your ladder to retrieve tools and materials. And forged steel with corrosion-resistant finish contents won’t fall out, even when you fold the ladder • Red wear indicator located in the center with the tools inside. From Klein Tools. From Lakeside Products. Part No. Max. Length Part No. Max. Length Part No. LADDERSACK KL5295L 5'-8" KL52957L 7' KL52956L 6' KL52958L 8' Fluorescent Portable Work Lights KL52966L 6'-6" Many styles are available, from light- to heavy-duty. From Jameson Corp. Fixed Body Belt Call for details. • Klein-Kord® belt pad with two pocket tabs • 4-3/4" rolled-edge leather belt cushion • 1-3/4" wide belt strap made of 6-ply Klein-Kord® • Equipped with 90° double-bar D-rings From Klein Tools. Call for details. Part No. 5268N

www.ptsupply.com I-14 [email protected] 800-238-7514 Tools & Safety

Standard-Plus Full-Floating Belt Disposable Dust Masks • Leather belt pad with two Full size; for use around grinding, pocket tabs sanding and cleaning dusty areas. NOT • Latigo-leather hood pre- SUITABLE for use against toxic or vents placing tools between hazardous air contaminants. Box of 50. belt pad and D-ring with web straps From Klein Tools. • 5" rolled-edge leather belt cushion Part No. 60080 • Padded for maximum comfort and body fit • 1-3/4" wide belt strap made of 6-ply Klein-Kord® • Full floating trace with 30° double bar D-rings Hard Caps From Klein Tools. Call for details. Made of high-density PE. Meets ANSI Part No. 5249N Z89. 1-1081 specs for Class A, B and C applications. Unique nape strap to hold cap firmly in place. From Klein Tools. Standard Full-Floating Belt Part No. 60009 - White • Klein-Kord® belt pad with Part No. 60010 - Yellow two pocket tabs Part No. 60011 - Blue • 5" rolled-edge leather belt cushion Winter Liner • Padded for maximum comfort and body fit One size fits all, white only. From Klein Tools. • 1-3/4" wide belt strap make of 6-ply Klein-Kord® Part No. 60015 • Full floating trace with 30° double-bar D-rings From Klein Tools. Call for details. Part No. 5282N Gloves

Linemen’s Rubber Gloves Pole Climbers High quality, natural rubber Sold in pairs, equipped with pads, calf and gloves are known for their ankle straps. From Klein Tools. “curved hand comfort” and flex- Part No. CN1972AR - Size adjustable ibility. From Bashlin Industries. 15" to 19" Please Note: Part No. CN1972ARL - Size adjustable Proper sizing is important for comfort. To determine 17" to 21" correct size, measure circumference of worker’s hand below the base of the fingers, on a line parallel to the finger crotches, passing through the thumb crotch, then Replacement Gaffs add 1". Please state size when ordering. Pair of gaffs supplied with flat socket-head cap screws Max. Test and wrench. No. 72 gaffs and No. 07 gaffs are inter- Part No. Usage (V) Class Voltage Color changeable and fit all Klein replaceable gaff climbers. 1410B 7,500 1 10,000 Black For your protection, we recommend that only the 1420B 17,000 2 20,000 Black original gaff and two replacements be used on replaceable gaff climbers. 1420YB 17,000 2 20,000 Yellow/Black From Klein Tools. Part No. 72 Work Gloves Several types to choose from including Gaff Sharpening Kit sueded deerskin gloves, long cuff A complete gaff sharpening kit in a handy roll-up gloves, driver’s gloves and medium cuff orange vinyl case with tie. Includes all necessary tools gloves. From Klein. Call for details. and instructions: 8" fine-tooth file, 3" honing stone, 40008 Klein KG-1 gaff gauge and fully illustrated instruction folder. From Klein Tools. Part No. KG2

I-15 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

Green Mountain Glove Company Wasp and Ant Killer Superior quality, patented goatskin gloves hand- Effective any time dangerous insects crafted in Vermont threaten the safety of personnel in • Goatskin leather for durability and flex- utility, telecommunications, industrial ibility under extreme weather conditions or commercial applications. The forceful • Air dries to original flexibility spray pattern delivers a high percent- • Nylon stitching ensures longer life age of the formula to the target site Many styles are available. Call for from a safe distance of 12-15 feet. Safe more information! for use around high-voltage equipment and all types of telecommunications equipment. 16 oz. We also have a selection of: aerosol, 12 per case. From Rainbow Technology. Part No. 4335 • climbing straps • protector boots • gaff guards • fire extinguishers • climber pads • wheel chocks Telco & Power Wasp and Ant Spray • protector gloves This spray EXCEEDS the strictest Tell us what you need and we'll find it! wasp spray specifications ever devel- oped. It quickly knocks down flying and stinging insects. High-output, 12-15 foot spray pattern is safe for use Halt® Dog Repellent on and in utility and telecom equip- Highly effective repellent stops attacking ment. 20 oz. aerosol, 12 per case. From dogs and other animals in their tracks. Rainbow Technology. Aerosol container sprays accurately up Part No. 88500 to 10'. Quick-aim safety cap and self- contained belt clip. For best results, spray HALT directly into the face and eyes of the Utility Sunscreen attacking animal. Medically safe pepper Industry recommended SPF 30. spray leaves no lasting after effects. Designed for all day protection from 1.5 oz. aerosol, 12 per case. the harmful rays of the sun – can From Rainbow Technology. stay in sun 30 times longer without Part No. 4019.2 - HALT burning. Waterproof, resists sweating Part No. 4027 - HALT II (contains three times the and moisture. Greaseless formula dries rapidly and will active ingredient - capsaicin - in HALT) not affect hand grip or come off on tools and equipment. Specially formulated for the Telecom and Utility indus- tries. One application lasts all day. Safe for skin or fabic. Jungle Formula Insect Repellent From Rainbow Technology. This powerful insect repellent Part No. 4022 - 4 oz. bottles, 12 per case provides long-lasting protection Part No. 40225 - Individual towelettes, 100 per dispos- against gnats, mosquitoes, biting able wall-mount dispenser box, three per case flies, chiggers, ticks, flying insects and fleas. Contains 23.75% DEET providing you with maximum Canadian Formula De-Icer personal protection. Reduces risk of Lyme Disease and Melts frost, ice and snow on contact down Rocky Mountain Spotted Fever. 6 oz. aerosol, 12 per to -60˚F. No scraping – just spray and go. case. From Rainbow Technology. Will not harm paint, metal, plexiglass or Part No. 4501.1 other surfaces found on motor vehicles and utility equipment. May also be used on other surfaces - from steps and walkways to frozen locks and windshields. 16 oz. aerosol, 12 per case. From Rainbow Technology. Part No. 4060.1

www.ptsupply.com I-16 [email protected] 800-238-7514 Tools & Safety

Marking Paints Buried Warning Tape Provide bold, bright visible markings. One- A strong tape with good stretching coat coverage, fast-drying, long lasting. VOC characteristics and high visibility. compliant, lead-free and biodegradable. Ten Plow into the ground simultaneously colors available. 20 oz. aerosol, 12 per case. with your cable. From Rainbow Technology. Call for details.

Part No. Size (height x length) Lettering

420011 6" x 6,000' Telephone Cable Caution, Fiber Optic 420021 3" x 1,000' extra stretch Lens Kleener Line Buried Below Caution, Telephone Convenient and effective cleaner for 420003 3" x 1,000' safety eyewear. Removes cable filling Line Buried Below compounds, icky pic and other com- Above signs printed black on orange. Many other options and colors are available. Call for details. mon workplace lubricants from glass, plastic and polycarbonate. Includes anti-fogging and anti-static compounds. Leaves no residue. 1 oz. bottle, Crystal Cap™ Tags & Markers 24 per case. From Rainbow Technology. Virtually indestructible, clear Part No. 4301 polyurethane crystal capping pro- vides the ultimate in appearance and durability. Tags are used for Warning Signs and Posts marking cables, pipes, poles and The signs can be made from aluminum, equipment. Curb and pavement markers withstand high-density PE (HDPE) or fiberglass years of weather and traffic. Custom sizes, shapes and reinforced plastic (FRP). prints are available. Part No. UCM505 - 4" x 12" Warning From ACP International. Call for details. sign. Specify wording and color Part No. UCM3 - 9" x 12" Warning sign. Specify wording and color Safety Signs, Stands and Cones Part No. UC8GR - 8' green channel sign A variety of warning and safety post 2lbs./ft. (hardware not included) products to protect your workers and Part No. 14X2SIGNMTGHDWR - Sign construction sites. All are available in mounting hardware many configurations, sizes and price Weight ranges. From Eastern Metal. Part No. Description Std. Pkg. (lbs/100) Yellow, 4" x 12" Aluminum New FHWA (Fed. Highway 1SP4121 "Buried cable sign, 1 20 Admin.) specified fluorescent Independent" pink color reflective signs. 8' galvanized steel post System includes a choice of Tripod or UP412096 with green enamel finish; 10 650 Compact C-Stand™ and a wide variety of sign legends hardware included and sizes to choose from. Quick, easy set-up. Compact Many additional sizes, logos, colors and storage and transportation. Approved for temporary hardware available. Call for details. traffic control zones.

Roll-Up Warning Signs & Roll-Up C-Signs™ Ready-to-use with installed fiberglass cross-braces. Utility Line Markers Diamond, rectangular and square shaped signs A wide range of specialty markers with customized messages and Center Hinged™ and Rigid Warning Signs company logos are available from Fold in half to protect finish, reduce storage space and Eastern Metal. Call for details. make handling easier. Diamond/Rectangular signs.

I-17 www.ptsupply.com [email protected] 800-238-7514 Tools & Safety

C-Stands™ For heavily equipped vehicles in need of a compact, high-performance stand. Aluminum or steel.

H-Stands™ Ideal for local and in-town 2-lane streets. Available for either rigid or roll-up signs.

X-Stands™ Designed to hold larger sized signs required for 4-lane highway use. Meet the interstate highway 60” height above grade requirement. E-Stands™ Heavy-duty, compact all-purpose folding stands designed for 2-lane local and/or 4-lane roadways.

USA-CONES™ A complete line of fluorescent orange traffic cones. Choose from trim-line and regular sizes, with or without reflective collars. Injection-molded one piece PVC construction ensures for structural superiority and extended life.

www.ptsupply.com I-18 [email protected] 800-238-7514 Tools & Safety

Notes

I-19 www.ptsupply.com [email protected] 800-238-7514