STM32, STR7 and STR9 Families Core: Cortex-M3, ARM7TDMI, ARM966E-S

SuppliersPgs42-49 9/4/07 4:15 PM Page 7

48 |

STMicroelectronics brings the power of 32-bit ARM® processor cores to the world of microcontrollers, opening endless opportunities to embedded system designers by making control and connectivity applications easy and affordable. With a wide range of embedded memories, peripherals and architectural enhancements, ST's STM32, STR7 and STR9 families help scale designs to achieve the best fit for an application. STM32, STR7 and STR9 families address needs, from low-end to high-performance, with a common set of tools and software, thus reducing cost and time to market.

Features ᭤ STR730 ARM7 • Performance up to 32 MIPs @ 36 MHz STM32 Cortex-M3 • The most timers (20), CANs (3), UARTs (4), and I/Os (112) • Lowest voltage, power and cost • Well-suited for industrial applications • Very high performance and integration • 4.5 to 5.5V operation • 1.25 DMIPS/MHz Harvard Architecture • Access Line - 36 MHz STR750 ARM7 • Performance line - 72MHz • 2.0 to 3.6V operation • Performance up to 54 MIPs @ 60 MHz • Peripherals include CAN, USB, 3xUARTs, and advanced timers • Suitable for many general-purpose applications STR710 ARM7 • Performance up to 45 MIPs @ 50 MHz STR910 ARM9E • STR7’s biggest RAM (64 KB) • Highest performance (96 MHz ARM9E) • External memory interface • Largest Flash/RAM memory size (544 KB/96 KB) • 3.0 to 3.6V operation • Ethernet connectivity • 2.7 to 3.6V I/O plus 1.8V core operation

Arrow Electronics ARM Solutions 1-866-910-3650 SuppliersPgs42-49 9/4/07 4:15 PM Page 8

| 49

STM32 Portfolio Diagram ARM7 | Cor tex-M3 | ARM9 Cor tex-R4 | XScale ARM11 Cor

STR7 and STR9 Portfolio Diagram tex-A8

For more information on Arrow’s ARM solutions, pricing, and availability, visit www.arrownac.com/arm or call 1-866-910-3650. To research and compare and contrast ARM solutions, visit www.embedded-developer.com.

ST Family of Microcontrollers | STMicroelectronics

www.arrownac.com/arm SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 1

50 |

STM32 Core: Cortex-M3

The STM32 family of 32-bit Flash microcontrollers is based on the breakthrough ARM Cortex-M3 core specifically developed for embedded applications. Benefiting from the Cortex-M3 architectural enhancements the STM32 offers 1.25 Dhrystone MIPS/MHz and a current consumption as low as 36mA at a full 72 MHz CPU speed executing directly from Flash memory with all peripherals clocked. The STM32 uses the Thumb2 instruction set that offers 30% to 45% less code size than an ARM7TDMI-based MCU yet is 35% faster. Two product lines, Access and Performance, offer up to 128 K Flash memory at either 36 MHz for Access line and 72 MHz for Performance line. These 2.0V to 3.6V devices also include very fast startup time, included reset supervisor, have very low interrupt latency and single cycle multiply and hardware divide.

Features ᭤ STM32 Block Diagram • 1.25 DMIPS/MHz Harvard Architecture • 0.19mW/MHz power consumption • Thumb2 instruction set (includes Thumb instructions) • Single cycle multiply and hardware division • Up to two 12-bit 1µs ADCs that can be syncronized • Fast interrupt controller embedded inside core • Low voltage 2.0V to 3.6V full speed operation • Startup from Stop less than 10µs

Benefits ᭤ • 30% improvement in performance over ARM7TDMI • High dynamic power efficiency in run mode and extremely low power in standby • 32-bit high performance with compact 16-bit code density • Very low interrupt latency down to 6 CPU cycles for inter-interrupts • Enabled for battery powered applications • Designed also for motor control • Very few external components needed • Serial Wire JTAG debug maximizes I/O

Arrow Electronics ARM Solutions 1-866-910-3650 SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 2

| 51 ARM7 | Family Comparative Features ᭤ Part Total Total Temp. °C Package Max. A/D A/D Timer Timer Serial Interface GPIO USB Peripherals Number Flash RAM Type Frequency Bits Channels Channels Bits Description

STM32F101C6 32 K 6 K -40 to +85 or 105 LQFP48 36 12 10 2 16 1xSPI, 1xI2C, 2xUSART 32 2xWDG, RTC, Temp Sensor

STM32F101C8 64 K 10 K -40 to +85 or 105 LQFP48 36 12 10 3 16 2xSPI, 2xI2C, 3xUSART 32 2xWDG, RTC, Temp Sensor Cor

STM32F101R6 32 K 6 K -40 to +85 or 105 LQFP64 36 12 16 3 16 1xSPI, 1xI2C, 2xUSART 49 2xWDG, RTC, Temp Sensor tex-M3 STM32F101R8 64 K 10 K -40 to +85 or 105 LQFP64 36 12 16 3 16 2xSPI, 2xI2C, 3xUSART 49 2xWDG, RTC, Temp Sensor

STM32F101RB 128 K 16 K -40 to +85 or 105 LQFP64 36 12 16 3 16 2xSPI, 2xI2C, 3xUSART 49 2xWDG, RTC, Temp Sensor

STM32F101V8 64 K 10 K -40 to +85 or 105 LQFP100 36 12 16 3 16 2xSPI, 2xI2C, 3xUSART 80 2xWDG, RTC, Temp Sensor

STM32F101VB 128 K 16 K -40 to +85 or 105 LQFP100 36 12 16 3 16 2xSPI, 2xI C, 3xUSART 80 2xWDG, RTC, Temp Sensor | ARM9 Cor

STM32F103C6 32 K 10 K -40 to +85 or 105 LQFP48 72 12 2 x 10 3 16 1xSPI, 1xI2C, 2xUSART, USB, CAN 32 Device 2.0 2xWDG, RTC, Temp Sensor

STM32F103C8 64 K 20 K -40 to +85 or 105 LQFP48 72 12 2 x 10 4 16 2xSPI, 2xI2C, 3xUSART, USB, CAN 32 Device 2.0 2xWDG, RTC, Temp Sensor

STM32F103R6 32 K 10 K -40 to +85 or 105 LQFP64 72 12 2 x 16 3 16 1xSPI, 1xI2C, 2xUSART, USB, CAN 49 Device 2.0 2xWDG, RTC, Temp Sensor

STM32F103R8 64 K 20 K -40 to +85 or 105 LQFP64 72 12 2 x 16 4 16 2xSPI, 2xI2C, 3xUSART, USB, CAN 49 Device 2.0 2xWDG, RTC, Temp Sensor

STM32F103RB 128 K 20 K -40 to +85 or 105 LQFP64 72 12 2 x 16 4 16 2xSPI, 2xI2C, 3xUSART, USB, CAN 49 Device 2.0 2xWDG, RTC, Temp Sensor

STM32F103V8 64 K 20 K -40 to +85 or 105 LQFP100, BGA100 72 12 2 x 16 4 16 2xSPI, 2xI2C, 3xUSART, USB, CAN 80 Device 2.0 2xWDG, RTC, Temp Sensor tex-R4 | Xscale ARM11 Cor STM32F103VB 128 K 20 K -40 to +85 or 105 LQFP100, BGA101 72 12 2 x 16 4 16 2xSPI, 2xI2C, 3xUSART, USB, CAN 80 Device 2.0 2xWDG, RTC, Temp Sensor

Development Tools Matrix ᭤

Tool Name Description Part Number

IAR KickStart Kit™ IAR KickStart Kits™ are cost effective and complete evaluation and development systems in a single package; they are designed to help you to a flying start by providing all the necessary hardware STM3210B-SK/IAR and software you need to design, implement and test your STM32 application Keil Starter Kit The Keil starter kit is a complete solution for evaluating and starting application development with the STM32 STM3210B-SK/KEIL Hitex Starter Kit The Hitex Starter Kit for STM32 is a complete solution for evaluating and starting application development with STM32 microcontrollers STM3210B-SK/HIT Raisonance REva Starter Kit The REva starter kit from Raisonance is a cost-effective and complete solution for evaluating and starting application development STM3210B-SK/RAIS Hardware Evaluation Board A full-featured hardware platform to evaluate all features of the STM32; does not include software or JTAG dongle STM3210B-EV/WS REva Daughter Card Daughter card to update STR7 REva kits to STM32 STM32103B-D/RAIS tex-A8

STM32 Evaluation Board

STM32 Family of Microcontrollers | STMicroelectronics

www.arrownac.com/arm SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 3

52 |

STR710F Core: ARM7TDMI

The STR710F series is loaded with many communication interfaces including USB, CAN, ISO7816 and four UARTs. It is endowed with the biggest RAM of all STR7 MCUs (up to 64 KB) and implements an optional external memory interface. This makes it a perfect fit for consumer, point of sales and high-end industrial applications. The STR710F also features high performance, very low power, and very dense code, and ST's latest 0.18µ embedded Flash technology.

Features ᭤ STR710F Series Block Diagram • Largest choice of peripherals and interfaces, including USB and CAN • Flexible power and clock management • Superior RAM/FLASH ratio • High-quality embedded Flash with 16 K extra Flash for EE emulation (20 year retention at 85°C) • Extensive package options including the space efficient 8x8 LFBGA64 and 10x10 LFBGA 144 • Extensive software and tool support including the complete STR7 library for USB

Benefits ᭤ • Reduces system cost with all peripherals on one chip • Allows full control over power consumption and performance/power tradeoffs • Unlimited possibilities - up to 64 K RAM, and always above 16 K even with smallest Flash option • 16 K extra Flash reduces system cost with no need for external EEPROM • Software and tools support dramatically reduces development time and increases ease-of-use

Arrow Electronics ARM Solutions 1-866-910-3650 SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 4

| 53 ARM7 Family Comparative Features ᭤ Part Total Total Temp. °C Package Core Max A/D A/D Timer Timer Serial Interface GPIO Ethernet USB Peripherals Number Flash RAM Type Variant ID Frequency Bits Channels Channels Bits Description | Cor STR710FZ1 144 32 -40 to +85 BGA144, LQFP144 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, CAN, SC 48 — Device 2.0 EMI

STR710FZ2 272 64 -40 to +85 BGA144, LQFP144 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, CAN, SC 48 — Device 2.0 EMI tex-M3 | ARM9 Cor

STR711FR0 80 16 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, SC 30 — Device 2.0 —

STR711FR1 144 32 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, SC 30 — Device 2.0 —

STR711FR2 272 64 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, SC 30 — Device 2.0 —

STR712FR0 80 16 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, CAN, SC 32 — — —

STR712FR1 144 32 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, CAN, SC 32 — — —

STR712FR2 272 64 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, CAN, SC 32 — — —

STR715FR0 80 16 -40 to +85 BGA64, LQFP64 ARM7TDMI 66 12 4 4 16 4xUART, 2xSPI, 2xI2C, SC 32 — — — tex-R4 | XScale ARM11 Cor

Development Tools Matrix ᭤

Tool Name Description Part Number

REva Starter Kit - Raisonance The REva starter kit from Raisonance is a cost-effective and complete solution for evaluating and starting application development STR71X-SK/RAIS

IAR KickStart Kit™ with STR711 IAR KickStart Kits™ are cost effective and complete evaluation and development systems in a single package; they are designed to help you to a flying start by providing all the necessary hardware STR711-SK/IAR and software you need to design, implement and test your STR7 application; includes J-Link: In-circuit debugger/programmer, featuring USB host interface and industry standard JTAG interface for application board connection; with STR711 target MCU

IAR KickStart Kit™ with STR712 IAR KickStart Kits™ are cost effective and complete evaluation and development systems in a single package; they are designed to help you to a flying start by providing all the necessary hardware STR712-SK/IAR and software you need to design, implement and test your STR7 application; includes J-Link: In-circuit debugger/programmer, featuring USB host interface and industry standard JTAG interface for application board connection; with STR712 target MCU

Hitex Starter Kit The Hitex Starter Kit for STR7 is a complete solution for evaluating and starting application development with ST ARM core-based microcontrollers; includes: application board; Tantino, in-circuit STR710-SK/HIT debugger/programmer, featuring USB host interface and industry standard JTAG interface; HiTOP5, 16K code-size limited version of Hitex’s full-featured Integrated Development Environment;

plus GNU C/C++ Compiler tex-A8

Keil STR710 kit The Keil starter kit, available from Keil, is a complete solution for evaluating and starting application development with the STR7; the package includes: application board with user LEDs, push buttons, STR710 kit switches, potentiometer and interfaces for device specific peripherals; ULink, in-circuit debugger/programmer; uVision3, the full-featured Integrated Development Environment; RealView Compilation Tools, 16K code-size limited version of the optimizing C/C++ compiler

STR710F Series IAR, Raisonance, & Hitex Starter Kits

STR710F Family of Microcontrollers | STMicroelectronics

www.arrownac.com/arm SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 5

54 |

STR750F Core: ARM7TDMI

The STR750F microcontrollers are the latest series in the STR7 family. These MCUs bring the best integration with a balanced peripheral set, USB, CAN, and key innovations like clock failure detection and advanced motor control timers. The STR750F supports either 3.3V or 5V systems, and it is also available in an extended temperature range (-40°C to +105°C). This makes it a genuine general purpose microcontroller, suitable for a wide range of applications such as appliance, brushless motor drive, USB peripheral, UPS, alarm systems, programmable logic controller, circuit breakers, inverters, and medical and portable equipment.

Features ᭤ STR750F Block Diagram • Excellent low power performance through flexible clock management and multiple low power modes with consumption down to 10 µA in standby mode • Innovative backup clock • Fast startup and wakeup • Auto wake-up • Serial memory interface (SMI) and LIN support • Single supply, 3.3V or 5V (3.3V for USB) • Powerful timers and fast ADC • Extensive firmware support and tools; the STR750F library is freely distributed by ST

Benefits ᭤ • Easy adjustment of performance/power consumption ratio; suitable for battery operated applications • Additional security due to backup clock • Fast startup and wakeup adds responsiveness • Auto wakeup improve power-savings • Less external hardware needed • 3.3V or 5V supply gives additional flexibility for customers; no need for external regulator; real 5V drive on the I/Os when 5V is used • Perfect fit for tri-phase motor control applications • Extensive library dramatically reduces development time and increases ease of use

Arrow Electronics ARM Solutions 1-866-910-3650 SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 6

| 55 ARM7 Family Comparative Features ᭤ Part Total Total Temp. °C Package Core Max. A/D A/D Timer Timer Serial Interface GPIO Ethernet USB Peripherals Number Flash RAM Type Variant ID Frequency Bits Channels Channels Bits Description

STR755FR0 80 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C 38 – – RTC, Motor Control | Cor

STR752FR0 80 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C, CAN 38 – – RTC, Motor Control

STR751FR1 144 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C 38 – Device 2.0 RTC, Motor Control tex-M3 | ARM9 Cor STR752FR1 144 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C, CAN 38 – – RTC, Motor Control

STR755FR1 144 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C 38 – – RTC, Motor Control

STR751FR2 272 16 -40 to +85 LQFP64, BGA64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C 38 – Device 2.0 RTC, Motor Control

STR752FR2 272 16 -40 to +85 LQFP64, BGA64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C, CAN 38 – – RTC, Motor Control

STR751FR0 80 16 -40 to +85 LQFP64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART 38 – Device 2.0 RTC, Motor Control

STR755FV2 272 16 -40 to +85 LQFP100, BGA100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C 72 – – RTC, Motor Control

STR750FV2 272 16 -40 to +85 LQFP100, BGA100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C, CAN 72 – Device 2.0 RTC, Motor Control

STR750FV1 144 16 -40 to +85 LQFP100, BGA100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C, CAN 72 – Device 2.0 RTC, Motor Control

STR755FV1 144 16 -40 to +85 LQFP100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C 72 – – RTC, Motor Control

STR750FV0 80 16 -40 to +85 TQFP100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C, CAN 72 – Device 2.0 RTC, Motor Control tex-R4 | Xscale ARM11 Cor STR755FV0 80 16 -40 to +85 LQFP100 ARM7TDMI 60 10 16 6 16 2xSSP, 3xHS-UART, I2C 72 – – RTC, Motor Control

STR755FR2 272 16 -40 to +85 LQFP64, BGA64 ARM7TDMI 60 10 11 6 16 2xSSP, 3xHS-UART, I2C 38 – – RTC, Motor Control

Development Tools Matrix ᭤

Tool Name Description Part Number

STR750 Full Evaluation Board STR750F full evaluation board with 2 x 16 LCD, LEDs, UART and CAN interfaces STR750-EVAL

Hitex Starter Kit for STR750 Hitex starter kit with STR750 evaluation board, USB-JTAG in-circuit debugger/programmer and 16 KB code-size limited version of HiTOP software toolchain STR750-SK/HIT

IAR KickStart™ Kit for STR750 IAR KickStart™ starter kit with STR750 evaluation board, USB-JTAG in-circuit debugger/programmer and 32 KB code-size limited version of EWARM software toolchain STR750-SK/IAR

Keil Starter Kit for STR750 Keil starter kit with STR750F evaluation board, USB-JTAG debugger and evaluation version of RealView Microcontroller Development Kit for ARM with uVision3 and ARM RealView Compilation Tools STR750-SK/KEIL

REva Starter Kit - Raisonance Raisonance REva starter kit for STR750F with RLink In circuit debugger/programmer (USB host interface), REva mother board, STR750F daughter, 16 KB code-size limited version of the RIDE software STR750-SK/RAIS tool set and GNU C/C++ compiler for ARM

STR750 Motor Control Kit This motor control kit is ready to run within minutes for PMSM and induction 3-phase motors using STR750F for vector control drive. PMSM motor included STR750-MCKIT tex-A8

ST750F Family of Microcontrollers | STMicroelectronics

www.arrownac.com/arm SuppliersPgs50-61(2) 9/5/07 9:32 AM Page 7

56 |

STR910FA Core: ARM966E-S

The STR910FA family of MCUs delivers up to 96 MIPS peak performance while executing code directly from its Flash memory, executes single-cycle DSP instructions within its ARM966E-S core, and includes Ethernet, USB, and CAN interfaces. These features, combined with Flash memory sizes reaching 544 Kbytes and a vast 96 Kbyte SRAM, make the STR910FA an ideal single-chip solution to transform embedded control applications into low cost nodes on a local network, or on the Internet.

Features ᭤ STR910FA Block Diagram • 96 MHz ARM966E-S CPU core with single-cycle DSP instructions and independent internal 32-bit buses • 10/100 Ethernet connectivity with optimized DMA data flow • Plentiful SRAM and Flash memories • Dual bank Flash • Flexible power and clock management with multiple low power modes • Low power (< 1 µA) real-time clock with programmable wake-up features • Extensive firmware support and tools offering. The STR910FA library is freely distributed from ST • Analog capability with 10-bit ADC and full supervisor functions

Benefits ᭤ • Simultaneous access to both code and data, generating 96 MIPS peak performance executing code from Flash memory, and at the same time capable of up to 384 Mbytes/sec DMA data flow between peripherals and SRAM • Connect your product to a network and retain ample CPU bandwidth to implement the embedded application • Meet requirements of complex applications, real-time operating systems (RTOSs), communication stacks and data storage • Ideal for robust In-Application Programming (IAP) and EEPROM emulation • Tailor your system on the fly to balance performance and power consumption as needed • Ideal for battery operated applications • Extensive firmware support dramatically reduces development time and increases ease of use • With so much inside, less is needed outside saving you space, cost and logistic headaches

Arrow Electronics ARM Solutions 1-866-910-3650 SuppliersPgs50-61(2) 9/5/07 9:33 AM Page 8

| 57 ARM7 | Cor Family Comparative Features ᭤ Part Total Total Temp. °C Package Core Max A/D A/D Timer Timer Serial Interface GPIO Ethernet USB Peripherals Number Flash RAM Type Variant ID Frequency Bits Channels Channels Bits Description

STR911FAM44 544 96 -40 to +85 LQFP80 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 40 – Device 2.0 RTC, Motor Control

STR912FAW44 544 96 -40 to +85 LQFP128 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI tex-M3 | STR912FAW42 288 96 -40 to +85 LQFP128 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI

STR911FAM42 288 96 -40 to +85 LQFP80 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 40 – Device 2.0 RTC, Motor Control

STR910FAW32 288 64 -40 to +85 LQFP128 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 80 – – RTC, Motor Control

STR910FAM32 288 64 -40 to +85 LQFP80 ARM966E-S 96 10 8 7 16 3xUART, 2x SPI, CAN, 2xFast I2C 40 – – RTC, Motor Control ARM9

STR911FAZ32 256 64 -40 to +85 BGA144 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 – – RTC, Motor Control, EMI

STR911FAW42 256 96 -40 to +85 LQFP128 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 – Device 2.0 RTC, Motor Control, EMI | Cor STR912FAW34 512 64 -40 to +85 LQFP128 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI

STR912FAW44 512 96 -40 to +85 LQFP128 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI tex-R4 | XScale ARM11 Cor STR912FAZ42 256 96 -40 to +85 BGA144 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI

STR912FAZ44 512 96 -40 to +85 BGA144 ARM966E-S 96 10 10 7 16 3xUART, 2xSPI, CAN, 2xFAST I2C 80 MAC 10/100 Device 2.0 RTC, Motor Control, EMI

Development Tools Matrix ᭤

Tool Name Description Part Number

STR9 Full Evaluation Board An open-design evaluation platform for STR910FA, which includes reference code and a range of hardware features for evaluation of device peripherals including USB, Ethernet, CAN, ADC and much more; STR910-EVAL in addition to a JTAG standard interface for in-circuit debugging and programming, it includes an ETM interface for connection of a trace tool

IAR KickStart™ Kit for STR9 IAR KickStart starter kit with STR9 evaluation board, USB-JTAG in-circuit debugger/programmer and 32 KB code-size limited version of EWARM software toolchain STR91X-SK/IAR

Keil STR9 Starter Kit Keil starter kit with STR9 evaluation board, USB-JTAG debugger and evaluation version of RealView Microcontroller Development Kit for ARM with uVision3 and ARM RealView Compilation Tools STR91X-SK/KEI

REva Starter Kit - Raisonance Raisonance REva starter kit for STR9 with RLink In circuit debugger/programmer (USB host interface), REva mother board, STR9 daughter board, 16 KB code-size limited version of the RIDE software STR91X-SK/RAI tex-A8 tool set and GNU C/C++ compiler for ARM

Hitex Starter Kit for STR9 Hitex starter kit with STR9 evaluation board, USB-JTAG in-circuit debugger/programmer and 16 KB code-size limited version of HiTOP software toolchain STR91X-SK/HIT

IAR KickStart Kit

STR910FA Family of Microcontrollers | STMicroelectronics

www.arrownac.com/arm SuppliersPgs50-61(2) 9/5/07 9:33 AM Page 9

58 |

STR730F Core: ARM7TDMI

STR730F Flash microcontrollers combine the industry standard ARM7TDMI® RISC microprocessor with embedded Flash and powerful peripheral functions, including up to 20 timers, 4xUARTs and 3xCANs. The STR730F MCUs are ideal for embedded applications requiring a compact yet powerful MCU, as well as versatile, scalable solutions such as user interfaces, factory automation systems and appliances. Additionally, the STR730F family features a single 5V power supply particularly suited to industrial applications.

Features ᭤ STR730F Block Diagram • Largest choice of peripherals and interfaces including 4xUART, up to 20 timers and up to 3xCAN • Flexible power and clock management • Five low-power modes • Low-power voltage regulator • Extensive software and tools including the complete STR7 library supporting all standard peripherals and CAN • Dual APB buses architecture • Single 5V power supply • 16-channel DMA

Benefits ᭤ • Reduces system cost with all peripherals in one chip • Full control over your power consumption and performance/power tradeoffs • Precisely manage low-power vs. performance • Built-in voltage regulator means fewer external components • Software library dramatically reduces development time and increases ease-of-use • Increased overall performance due to dual buses • Native 5V supply of industrial applications; no 3.3V conversion needed • DMA lowers CPU load, optimized access to memory

STR730F Family of Microcontrollers | STMicroelectronics