Condor 4108xX

Key features of this product: - AMD®­ Embedded ® E8860 GPU Low Latency GPGPU & Video Capture XMC - Video Inputs: (2) ARINC 818 with Dual ARINC 818 Video Inputs/Outputs - Video Outputs: (2) ARINC 818 & (2) DisplayPort - Rear XMC I/O (Pn6 VITA 46.9, x12d+x8d+24s) The Condor 4108xX is a rugged, XMC Graphics card based on the AMD® - Low Latency Video Capture Radeon® E8860 GPU. This card is built with two DisplayPort and two ARINC 818 compatible outputs, along with two ARINC 818 compatible inputs. The - 2 GB GDDR5 Graphics Memory AMD GPU supports OpenGL, DirectX, and OpenCL and can be used for GPGPU - 640 Shader Processors applications. This XMC card can simultaneously capture and display two simultaneous ARINC 818 compatible video streams that include frame header, -128-bit Memory Interface container header, video and ancillary data. The card captures the incoming video - 72 GB/s Memory Bandwidth data and sends it over PCIe to the host machine as raw data with low latency. - Up to 768 GFLOPs FP32 Compute Performance The AMD GPU on the Condor 4108xX supports OpenCL and can be used for compute - H.264 Hardware Decoder (UVD 4.0) intensive GPGPU applications. Applications can access video streams in the form of - H.264 Hardware Encoder (VCE 1.0) raw frames for processing, 360˚ stitching, frame/video analysis, compression or video streaming. All decoding, scaling, video combining and format conversions can be done - MIL-STD-810 in the GPU with minimal CPU impact. A simple, proven and efficient API is provided - Conduction Cooled to handle all video capture, processing and display and can integrate seamlessly into - Thermally Efficient Heatsink Technology your application. This enables developers to capture video and ancillary data from a camera or other ARINC 818 source, perform video tracking or analysis on the data - Real Time Operating System (RTOS) Support using the GPU, and then send the ARINC 818 signal on to a compatible display device, such as a monitor. The input streams can be displayed on any of the outputs and Fully Ruggedized can be positioned or sized (enlarged or shrunk). VCE 1.0 (Video Engine) and UVD 4.0 (Unified Video Decoder) and can be used to hardware encode or decode H.264 video. The card is available in conduction cooled with rear XMC I/O on Pn6. Condor 4108xX Specifications

AMD Radeon E8860 GPU Graphics Processor supporting OpenGL 4.2, DirectX 11.1 and Shader 5.0 XMC 1.0 or XMC 2.0 Interface 8 Lane PCIe 3.0 2 GB GDDR5 Graphics Memory 128-bit Memory Interface 72 GB/s Memory Bandwidth (2) ARINC 818 (over copper) (2) DisplayPort++ Video Outputs Rear Pn6 XMC I/O. VITA 46.9 x12d+x8d+24s Note: ARINC 818 includes video data, frame header, container header, ancillary data and video data. (2) ARINC 818 (over copper) Video Inputs Rear Pn6 XMC I/O. VITA 46.9 x12d+x8d+24s. 640 Shader Processors Up to 768 GFLOPs FP32 Single Floating Point Performance GPGPU Capabilities OpenCL 1.2, DirectCompute 11 H.264 Hardware Decoder UVD 4.0 (Unified Video Decoder) H.264 Hardware Encoder VCE 1.0 ( Engine) Power Consumption 25 - 45 W Operating Temperature (MIL-STD-810) -40°C to 85°C (Rugged Conduction Cooled) Vibration (MIL-STD-810) 0.1 g²/Hz Shock (MIL-STD-810) 40 g Humidity (MIL-STD-810) 95% Without Condensation Windows or on x86 Software & Platform Support RTOS Support - VxWorks (others as needed) VPX & PCIe (with adapter board) Condor 4108xX Block Diagram Condor 4108xX Block Diagram

4 lane DisplayPort++ XMC CONNECTOR (Pn6) [VITA 46.9, x12d+x8d+24s] 46.9, [VITA CONNECTOR (Pn6) XMC AMD E8860 XMC CONNECTOR (Pn5) CONNECTOR XMC GPU Rear Transition DisplayPort++ Module Gen 3

DL DL ARINC-818 (optical)

PCIe x8 PCIe - DVI - DVI Copper to Optical BACKPLANE Conversion SWITCH (Outputs) ARINC-818 (optical)

ARINC-818 ARINC-818 (optical) Optical to Copper Conversion ARINC-818 4 lane (Inputs) ARINC-818 (optical) FPGA ARINC-818

ARINC-818

Website: www.eizorugged.com Email: [email protected]

EIZO, the EIZO logo, and Condor are trademarks or registered trademarks of EIZO Corporation. All other company names, product names, and logos are trademarks or registered trademarks of their respective companies. Copyright ©2020 EIZO Rugged Solutions Inc. All rights reserved. Information in this document is subject to change without notice. EIZO Rugged Solutions Inc. assumes no responsibility for errors or omissions that may appear in this document Rev A