888-883-5144
CROWDERSUPPLY.COM
JACKHAMMERS / BREAKERS CONSUMABLE TOOLS
POST DRIVERS SOIL STABILIZATION
ROCK DRILLS DRILL STEEL & BITS
RIVET BUSTERS SERVICE & REPAIRS
CHIPPING HAMMERS CUSTOM MANUFACTURING
Quality Tools and Consumables AUTHORIZED DISTRIBUTOR
for Construction, Mining and Industry.
Celebrating 25 years of service! Thank you for your business.
888-883-5144 CROWDERSUPPLY.COM 08/08/2016 888-883-5144 2 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SOIL STABILIZATION Adaptors 1 PIECE DRIVER SSD1PC ⅞ X 4¼ - 13” OAL SSD1PC33-24 ⅞ X 4¼ - 24” OAL-33mm Nose SSD1PCB ⅞ X 4¼ - 13” OAL-Bulb Nose SSD1PC-30 ⅞ X 4¼ - 30” OAL SSD1PC33 ⅞ X 4¼ - 13” OAL-33mm Nose SSD1PC-30B ⅞ X 4¼ - 30” OAL-Bulb Nose SSD1PC-88 1 x 4¼ - 13” OAL SSD1PC-36 ⅞ X 4¼ - 36” OAL SSD1PC-18 ⅞ X 4¼ - 18” OAL SSD1PC48 ⅞ X 4¼ - 48” OAL SSD1PC-24 ⅞ X 4¼ - 24” OAL SPLIT SET DRIVER HEAD - TAPERED SOCKET
SSD7811 ⅞” X 11º Taper SSD781233 ⅞” X 12º Taper-33mm Nose SSD781133 ⅞” X 11º Taper-33mm Nose SSD8811 1” x 11º Taper SSD7812 ⅞” X 12º Taper SSD8812 1” x 12º Taper SPLIT SET DRIVER HEAD—THREADED SSDR25F-B R25 Female Bulb Nose SSDR38M R38 Male, 8¼” OAL, 2¾” Nose SSDR25F-S R25 Female, Standard Nose SSDR38F-10.7 R38 Female, 10¾” OAL, 1¾” Nose SSDR25F-33 R25 Female, 33mm Nose SSDR38F-11.7 R38 Female, 11¾” OAL, 1¾” Nose SSDR32F-B R32 Female, Bulb Nose SSDR38F-13.5 R38 Female, 13½” OAL, 2” Nose SSDR32F-S R32 Female, Standard Nose SSDR38F-13.7 R38 Female, 13¾” OAL, 1¾” Nose SSDR32F-33 R32 Female, 33mm Nose SSDR38F-15.7 R38 Female, 15¾” OAL, 1¾” Nose SSDR32F-10.7 R32 Female, 12¼” OAL, 1½” Nose SSDR38F-16.7 R38 Female, 16¾” OAL, 2” Nose SSDR32F-24 R32 Female, 24” OAL SSDDR38F-20 R38 Female, 20” OAL, 2¾” Nose SSDR32F-46 R38 Female, 46mm Nose SSDT38 T38 Female SSDR38F-46 R38 Female, 46mm Nose SSDT38F-12.5 T38 Male, 12½” OAL, 1½” Nose SSDT38F-46 T38 Female, 46mm Nose Other sizes built on request 1 x 6¼ SHANK DRIVERS SSD89-15 1 x 6¼” - 15” OAL, 2¼” Nose SSD89-22 1 x 6¼” - 22” OAL, 1½” Nose SSD89-15.75 1 x 6¼” - 15¾” OAL, 2½” Nose SSD89-24 1 x 6¼” - 24” OAL, 4” Bulb Nose SSD89-18 1 x 6¼” - 18” OAL, 2¾” Nose SSD89-30 1 x 6¼” - 30” OAL, 4” Std Nose SSD89-18S 1 x 6¼” - 18” OAL, 4” Std Nose SSD89-32 1 x 6¼” - 32” OAL, 4” Std Nose SSD89-21.25 1 x 6¼” - 21¼” OAL, 2¾” Nose SSD89-40MC 1 x 6¼” - 40” OAL, 4” Bullet Nose SSD89-21.5 1 x 6¼” - 21½SOIL” OAL, STABILIZATION2¼” Nose SSD89 -42MC 1 x 6¼” - 42” OAL, 4” Bullet Nose MAI Grout Rods, Bits & Accessories—Hollow Grout Rod GROUT SWIVELS GROUTSWIVEL FLUSHING COLLAR JUNCTION BAR SEALS R32 GSR32 GSR32-FC GSR32-JB GSR32-S R38 GSR38 GSR38-FC GSR38-JB GSR38-S T38 GST38 GST38-FC GST38-JB GST38-S PLATES Plates made to order: Example (½” x 5 x 5 with ½” hole) - Specify thickness, size and hole size
2 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 3 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SOILSOIL STABILIZATION STABILIZATON MAI Grout Rods, Bits & AccessoriesAdaptors— Hollow Grout Rod LARGE GROUT SWIVELS (FEMALE—FEMALE) ROTOJEC SHANKS (JUNCTION BARS) Rope threads are listed, but all threads are available 3” OD SHANK WT. HEAVY DUTY WT. 5” OD BODY (LBS) 4” OD SHANK (LBS) 6” OD BODY Grout Injection Body RJ-BODY 25 RJ-BODY-HD 32 Seals/Double Lip—Set of 4 RJ-SEALS 0.1 RJ-SEALSHD 0.1
Rotojec Shank T38-R32 RJ-T38-R32 16 RJ-T38-R32HD 29 Rotojec Shank T38-R38 RJ-T38-R38 16 RJ-T38-R38HD 29 Rotojec Shank T38-R51 RJ-T38-R51 16 RJ-T38-R51HD 29 Rotojec Shank T45-R32 RJ-T45-R32 16 RJ-T45-R32HD 29 Rotojec Shank T45-R38 RJ-T45-R38 16 RJ-T45-R38HD 29 Rotojec Shank T45-R51 RJ-T45-R51 16 RJ-T45-R51HD 29 Rotojec Shank T51-R32 RJ-T51-R32 16 RJ-T51-R32HD 29 Rotojec Shank T51-R38 RJ-T51-R38 16 RJ-T51-R38HD 29 Rotojec Shank T51-R51 RJ-T51-R51 16 RJ-T51-R51HD 29 Rotojec Shank T51-T76 RJ-T51-T76HD 29 Rotojec Shank H55-R32 RJ-H55-R32 16 RJ-H55-R32HD 29 Rotojec Shank H55-R38 RJ-H55-R38 16 RJ-H55-R38HD 29 Rotojec Shank H55-R51 RJ-H55-R51 16 RJ-H55-R51HD 29 Rotojec Shank H55-T76 RJ-H55-T76HD 29 Collared Grout Shanks—Made on Request Add $125.00 to the standard shank price
SWIVEL SAVERS Swivels are machined and heat-treated while sacrificial grout rod is relatively soft. In heavy percussive applications it is not uncommon for the grout rod to deform inside of the swivel causing the rod to stick inside the Rotojec shank. Swivel savers are designed with a shortened male thread to facilitate removal from the shank and send the percussive energy through the shoulder of the swivel. If a rod becomes stuck in the swivel saver, you should be able to re- move the hardened saver from the hardened shaft and e x tract the softer grout rod from the saver “at your convenience.” It is also common to use these sav- ers as adaptors to effectively drive several different sizes of grout rod with the same Rotojec shank. R51M TO R51F SSR51M-R51F R38M TO R38F SSR38M-R38F R51M TO R38F SSR51M-R38F R38M TO R51F SSR38M-R51F R38M TO R32F SSR38M-R32F
888-883-5144 CROWDERSUPPLY.COM 3 888-883-5144 4 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SOIL STABILIZATION MAI Grout Rods, Bits & Accessories—Hollow Grout Rod
STUD RODS AND STUD ROD ADAPTORS COUPLING ADAPTORS Stud rods are short sections of male to male rods that are used to e x tend the reach slightly and to adapt to different thread than what you may have currently Coupling adaptors are female to female and available. These are machined and heat-treated for strength and longevity. used to adapt to a different thread than what you may currently be running. These are H55 TO T45 SRH55-T45 T45 Male All Thread—Cut to Length ET45-12AT machined and heat-treated blast-hole quality couplings H55 TO T51 SRH55-T51 T38 Male All Thread—Cut to Length ET38-12AT CPLR32S Coupling 1¼” Rope, Square T51 TO R51 SRT51-R51 R38 Male All Thread—Cut to Length ER38-12AT CAR32-R38 1¼” Rope –1½” Rope T45 TO R32 SRT45-R32 R32 Male All Thread—Cut to Length ER32-12AT CAR32-R38SQ 1¼” Rope –1½” Rope Square T38 TO R32 SRT38-R32 CAR32-T38 1¼” Rope –T38 T38 TO 425 SRT38-R25 CAR32-T38SQ 1¼” Rope –T38 Square R32 TO R25 SRR32-R25 CAR32-T45 1¼” Rope –T45 R51 TO 451 ER51-51R-12 CAR32-T51 1¼” Rope –T51 T51 TO T51 ET51-51R-12 CAR32-R51 1¼” Rope –2” Rope H55 TO H55 EHTT-55R-12 CPLR38S Coupling 1½” Rope Square MAI ANCHOR BARS CAR38-T38 1½” Rope—T38 10’ IBOGR-R32-10 MAI Anchor Rod R32N CAR38-T45 1½” Rope—T45 CAR38-T51 1½” Rope—T51 10’ IBOGR-R38-10 MAI Anchor Rod R38N CAR38-R51 1½” Rope—2” Rope 10’ IBOGR-R51-10 MAI Anchor Rod R51L CAR38-H55 1½” Rope—H55 CAT38-T45 T38—T45 10’ IBOGR-R51N-10 MAI Anchor Rod R51N CAT38-T51 T38—T51
MAI E X TENSION COUPLINGS CAT38-H55 T38—H55 CAT45-T51 T45—T51 IBOCPL-R32 MAI Coupling “L&N” R32/Ø42/L145 CAT45-R51 T45—2” Rope IBOCPL-R38 MAI Coupling “NG” R38/Ø51/L220 CAT45-T76 T45—T76 IBOCPL-R51 MAI Coupling “NG” R51N/Ø63/L220 CAT45-H55 T45—H55 CAT51-R51 T51—2” Rope MAI NUTS AND PLATES CAT55-H55 T55—H55 IBONUT-R32 MAI Nut R32/SW46/L45 CAT51-T76 T51—T76 IBONUT-R38 MAI Nut R38/SW50/L50 CAT76-H55 T76—H55 IBONUT-R51 MAI Nut R51/SW75/L70 CAR51-H55 2” Rope—H55 DEFORMED PLATES IBO9899100789 Deformed Plate—200 x 200 x 10mm Ø35mm 32mm Bar IBO9899100800 Deformed Plate—200 x s200 x 12mm Ø41mm 38mm Bar IBO9899150096 Deformed Plate—200 x 200 x 30mm Ø60mm 51mm Bar IBO9899150097 Deformed Plate—250 x 250 x 40mm Ø60mm 51mm Bar Other sizes and options available upon request
4 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 5 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SOIL STABILIZATION MAI Grout Rods, Bits & Accessories—Hollow Grout Rod
MAI BITS ***Custom Threads Available Upon Request*** *** Minimum Order Quantity May Apply*** CARBIDE CROSS BITS Wt. R32 R38 R51 T76 2” 1.5 IBOBC-R32-51 2½” 3.5 IBOBC-R32-64 IBOBC-R38-64 3” 5.5 IBOBC-R32-76 IBOBC-R38-76 IBOBC-R51-76 3½” 6.0 IBOBC-R32-89 IBOBC-R38-89 IBOBC-R51-89 4” 7.5 IBOBC-R32-102 IBOBC-R38-102 IBOBC-R51-102 4½” 9.0 IBOBC-R32-115 IBOBC-R38-115 IBOBC-R51-115 5” 17.5 IBOBC-R38-127 IBOBC-R51-127 IBOBC-T76-127 6” 20 IBOBC-R38-152 IBOBC-R51-152 IBOBC-T76-152 7” 21 IBOBC-R38-178 IBOBC-R51-178 IBOBC-T76-178 CARBIDE BUTTON BITS Wt. R32 R38 R51 T76 2½” 3.5 IBOBB-R32-64 IBOBB-R38-64 3” 5.5 IBOBB-R32-76 IBOBB-R38-76 IBOBB-R51-76 3½” 6.0 IBOBB-R32-89 IBOBB-R38-89 IBOBB-R51-89 4” 7.5 IBOBB-R32-102 IBOBB-R38-102 IBOBB-R38-102 4½” 9.5 IBOBB-R32-115 IBOBB-R38-115 IBOBB-R51-115 5” 19.0 IBOBB-R38-127 IBOBB-R51-127 IBOBB-T76-127 6” 23.0 IBOBB-R38-152 IBOBB-R51-152 IBOBB-T76-152 HARDENED STEEL SOIL BITS Wt. R32 R38 2” 1.0 IBOBS-R32-51 IBOBS-R38-51
2½” 1.3 IBOBS-R32-64 IBOBS-R38-64 3” 2.0 IBOBS-R32-76 IBOBS-R38-76
3½” 2.6 IBOBS-R32-89 IBOBS-R38-89 4” 2.7 IBOBS-R32-102 IBOBS-R38-102
3-WING DRAG BIT—CLAY, SAND & SOIL Wt. R32 R38 R51 T76
5” 1 IBOBD-R32-127 IBOBD-R38-127 IBOBD-R51-127 IBOBD-T76-127
6” 3.5 IBOBD-R38-152 IBOBD-R51-152 IBOBD-T76-152
7” 5.4 IBOBD-R38-178 IBOBD-R51-178 IBOBD-T76-178
8” 6.25 IBOBD-R38-203 IBOBD-R51-203 IBOBD-T76-203
888-883-5144 CROWDERSUPPLY.COM 5 888-883-5144 6 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS
AUGER ROD STEEL UNPLUGGER BIT KNOCKER Traditional percussive drill steel works by means of per- DSU96 8’ Steel Unplugger BN78 ⅞” Bit Knocker cussive blow on one end, which transmits a shockwave BN88 1” Bit Knocker down the steel to a carbide rock bit on the other end. The rock in front of this bit is shattered and the bit/steel is rotat- TAPERED BUTTON BIT—11º ed slightly to shatter new rock. Simultaneously, air or air/ water mi x is blown down the steel and out the bit to clear TB71135B Tapered Button Bit 1” x 11º 1⅜” the face of the bit and flush the cuttings up out of the hole. TB71138B Tapered Button Bit 1” x 11º 1½” In e x tremely bad ground where the rock is not competent or there are fissures which absorb the blow air, the cut- TB71141B Tapered Button Bit 1” x 11º 1⅝” tings are not able to make it to the surface. This will often result in a “stuck” steel and having to abandon the hole, TAPERED BUTTON BIT—12º (not to mention, your steel and bit). Auger drill steel was TB71235B Tapered Button Bit 1” 12 º 1⅜” designed with these horrific ground conditions in mind. It combines a high quality percussive drill steel with flights TB71238B Tapered Button Bit 1” 12 º 1½” like a rotary drill. The flights act to facilitate bringing the cuttings out of the hole and also serve to help keep your TB71241B Tapered Button Bit 1” 12 º 1⅝” hole straight. REAMING BITS
Minimum Order Quantity of 10; Specialty Steel—please BR22MM64 Reaming Button Bit 2½” call for lead time BR22MM76 Reaming Button Bit 3” BR22MM89 Reaming Button Bit 3½” Length 11º Auger Rod 12º Auger Rod (ft) ⅞⅞ x 4-¼” Shank ⅞ x 4-¼ Shank BR22MM57-6W Reaming Button Bit 2¼” 2’ DS7811-24AUG DS7812-24AUG BR22MM64-6W Reaming Button Bit 2½” 4’ DS7811-48AUG DS7812-48AUG BR22MM76-6W Reaming Button Bit 3” 6’ DS7811-72AUG DS7812-72AUG BIT SHELLS 8’ DS7811-96AUG DS7812-96AUG BR-BS7811-6 Reaming Bit Adapt ⅞” x 11º 10’ DS7811-120AUG DS7812-120AUG BR-BS7812-6 Reaming Bit Adapt ⅞” x 12º 12’ DS7811-144AUG DS7812-144AUG BR-BS8811-6 Reaming Bit Adapt 1” x 11º Also see Additional Reaming Equipment 14’ DS7811-168AUG DS7812-168AUG
TAPERED ROCK BITS ⅞” X 11º SINGLE PASS ⅞” X 12º SINGLE PASS 1” X 11º SINGLE PASS
TB71125 Tapered Bit ⅞ x 11º-1” TB71128 Tapered Bit ⅞ x 11º-1⅛” TB71132 Tapered Bit ⅞ x 11º-1¼” TB71135 Tapered Bit ⅞ x 11º-1⅜” TB71235 Tapered Bit ⅞ x 12º-1⅜ TB81135 Tapered Bit 1” x 11º-1⅜” TB71138 Tapered Bit ⅞ x 11º-1½” TB71238 Tapered Bit ⅞ x 12º-1½” TB81138 Tapered Bit 1” x 11º-1½” TB71141 Tapered Bit ⅞ x 11º-1⅝” TB71241 Tapered Bit ⅞ x 12º-1⅜” TB81141 Tapered Bit 1” x 11º-1⅜” TB71145 Tapered Bit ⅞ x 11º-1¾” TB71245 Tapered Bit ⅞ x 12º-1¾” TB81145 Tapered Bit 1” x 11º-1¾” TB71148 Tapered Bit ⅞ x 11º-1⅞” TB71151 Tapered Bit ⅞ x 11º-2” TB71251 Tapered Bit ⅞ x 12º-2” TB81151 Tapered Bit 1” x 11º-2” ** Requires modified tapered steel
6 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 7 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS
TAPERED DRILL STEEL
⅞ X 11º ⅞ X 12º 1 X 11º SHANK ⅞ X 3-¼ ⅞ X 4-¼ ⅞ X 3-¼ ⅞ X 4-¼ 1 X 4-¼ 1’ DS7711-12 DS7811-12 DS7712-12 DS7812-12 DS8811-12 1’-6” DS7711-18 DS7811-18 DS7712-18 DS7812-18 DS8811-18 2’ DS7711-24 DS7811-24 DS7712-24 DS7812-24 DS8811-24 2’-6” DS7711-30 DS7811-30 DS7712-30 DS7812-30 DS8811-30 3’ DS7711-36 DS7811-36 DS7712-36 DS7812-36 DS8811-36 3’-6” DS7711-42 DS7811-42 DS7712-42 DS7812-42 DS8811-42 4’ DS7711-48 DS7811-48 DS7712-48 DS7812-48 DS8811-48 4’-6” DS7711-54 DS7811-54 DS7712-54 DS7812-54 DS8811-54 5’ DS7711-60 DS7811-60 DS7712-60 DS7812-60 DS8811-60 5’-6” DS7711-66 DS7811-66 DS7712-66 DS7812-66 DS8811-66 6’ DS7711-72 DS7811-72 DS7712-72 DS7812-72 DS8811-72 6’-6” DS7711-78 DS7811-78 DS7712-78 DS7812-78 DS8811-78 7’ DS7711-84 DS7811-84 DS7712-84 DS7812-84 DS8811-84 7’-6” DS7711-90 DS7811-90 DS7712-90 DS7812-90 DS8811-90 8’ DS7711-96 DS7811-96 DS7712-96 DS7812-96 DS8811-96 8’-6” DS7711-102 DS7811-102 DS7712-102 DS7812-102 DS8811-102 9’ DS7711-108 DS7811-108 DS7712-108 DS7812-108 DS8811-108 10’ DS7711-120 DS7811-120 DS7712-120 DS7812-120 DS8811-120 10’-6” DS7711-126 DS7811-126 DS7712-126 DS7812-126 DS8811-126 11’ DS7711-132 DS7811-132 DS7712-132 DS7812-132 DS8811-132 12’ DS7711-144 DS7811-144 DS7712-144 DS7812-144 DS8811-144 13’ DS7711-156 DS7811-156 DS7712-156 DS7812-156 14’ DS7711-168 DS7811-168 DS7712-168 DS7812-168 15’ DS7711-180 DS7811-180 DS7712-180 DS7812-180 21’ DS7711-252 DS7811-252 DS7712-252 DS7812-252 LBR-MT711 Re-taper to accept 1” bit
BIT ADAPTOR BIT SHIM TAPGER GAUGE BAR25-7811 1” Rope to ⅞ x 11º SHIM1 Brass Shims ⅞” x 11º or 12º TG711 Taper Gauge ⅞ x 11º BAR22-7811 ⅞” Rope to ⅞ x 11º SHIM2 Brass Shims 1” x 11º or 12º TG811 Taper Gauge 1 x 11º BAR25-7812 1” Rope to ⅞ x 12º TG712 Taper Gauge ⅞ x 12º TG812 Taper Gauge 1 x 12º
888-883-5144 CROWDERSUPPLY.COM 7 888-883-5144 8 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS 1” Rope (R25 or 100 Rope)
E X TENSION ROD SHANKED ROD ⅞” He x 1” He x ⅞” X 4 ¼” 1” X 4 ¼” 12” ER25-22H-12 ER25-25R-12 SB78R25 SB88R25 18” ER25-22H-18 ER25-25R-18 DS78R25-18 DS88R25-18
24” ER25-22H-24 ER25-25R-24 DS78R25-24 DS88R25-24 30” DS78R25-30 DS88R25-30 36” ER25-22H-36 DS78R25-36 DS88R25-36 48” ER25-22H-48 ER25-25R-48 DS78R25-48 DS88R25-48 72” ER25-22H-72 ER25-25R-72 DS78R25-72 DS88R25-72 96” ER25-22H-96 ER25-25R-96 DS78R25-96 DS88R25-96 120” ER25-22H-120 ER25-25R-120 DS78R25-120 DS88R25-120 144” ER25-22H-144 ER25-25R-144 DS78R25-144 DS88R25-144 ROCK BITS CROSS BIT BUTTON BIT REAMING BIT
DRIFTER (CLUB) ROD 1¼” BCR2532
1” Rope R32-R25 10’ 1½” CLB-R32-25R-R25-121 1⅜” BCR2535 BBR2535
1” Rope R32-R25 12’ 1½” CLB-R32-25R-R25-145 1½” BCR2538 BBR2538 1⅝” BCR2541 BBR2541 1” Rope R32-R25 6’ 4” CLB-R32-25H-R25-76 1¾” BCR2545 BBR2545 1” Rope R32-R25 8” CLB-R32-25H-R25-96 1⅞” BCR2548 BBR2548 CLB-R32-25H-R25-120 1” Rope R32-R25 10’ 1½” 2” BCR2551 BBR2551 1” Rope R32-R25 12’ 1½” CLB-R32-25H-R25-145 2¼” BCR2557 BBR2557
1” Rope R32-R25 13’ 1½” CLB-R32-25H-R25-157 2½” BCR2564 BBR2564 BRR2564 3” BCR2576 BBR2576 BRR2576 COUPLING ADAPTOR BCR2589 BBR2589 BRR2589 CPLR25 1” Rope Coupling 3½” 4” BCR25102 BBR25102 BRR25102 CPLR25T 1” Rope Coupling—Thin Wall BIT ADAPTOR CAR22-R25 ⅞” Rope—1” Rope BAR25-R38 1” Rope (F) - 1½” Rope (M) CAR25-R28 1” Rope—1⅛” Rope BAR25-R32 1” Rope (F) - 1¼” Rope (M) CAR25-R32 1” Rope—1¼” Rope BAR25-R28 1” Rope (F) - 1⅛” Rope (M) CAR25-R38 1” Rope—1½” Rope BAR25-T38 1” Rope (F) - T38 (M) CAR25-T38 1” Rope—T38 BAR25-H 1” Rope (F) - H Thread CAR25-T45 1” Rope—T45 STUD ROD ADAPTOR
HOLE SAVER SRT38-R25 Stud Rod Male/Male Adaptors—T38-R25 SRR32-R25 Stud Rod Male/Male Adaptors—R32-R25 HSBR25 Bell Hole Saver—1” Rope SRR25-7811 Stud Rod Male/Male Adaptors—R25-11º HSSR25 Spear Hole Saver—1” Rope SRR25-7812 Stud Rod Male/Male Adaptors—R25-12º
8 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 9 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS 1¼” Rope (R32 or 125 Rope)
E X TENSION ROD SHANKED ROD 1¼” Round 1¼” Round 1¼” Round Male- Single Thread Double Thread 1” He x Female All Thread 8“ ER32-32R-8 12” ER32-32R-12 ER32-32R-12AT 24” ER32-32R-24 ER32-25H-24C ER32-32R-24AT 36” ER32-32R-36 ER32-32R-36AT 48” ER32-32R-48 ER32-25H-48 ER32-32R-51MF ER32-32R-48AT 60” ER32-32R-60 ERF32-32R-63MF ER32-32R-60AT 72” ER32-32R-72 ER32-25H-72 ER32-32R-75MF ER32-32R-72AT 96” ER32-32R-96 ER32-25H-96C ER32-32R-99MF ER32-32R-96AT 120” ER32-32R-120 ER32-32R-120 ER32-25H-120 ER32-32R-123MF ER32-32R-120AT 144” ER32-32R-144 ER32-32R-144 ER32-32R-147MF ER32-32R-144AT 168” ER32-32R-168 ER32-32R-168 ER32-32R-168AT
SHANKED ROD Percussive rock bits do not “cut” through rock. Rock bits are designed to utilize the ⅞” X 4 ¼” 1” X 4 ¼” percussive energy of the rock drill to shat- ter the rock and blow the cuttings up out of 11” SB78R32 SB88R32 the hole. When running in clay or dirt it 18” SD88R32-18 creates a very big problem for a traditional rock drill/bit. Dirt and clay does not shatter 24” DS88R32-24 and the percussive energy is simply ab- sorbed and the blow air and drag of the bit 30” DS88R32-30 across the material, are the only means of progressing the 36” DS88R32-36 hole. In these cases, “drag bits” can be a very effective way to deal with ground that will often shut down the productivity 48” DS88R32-48 of a rock drill. Drag bits have carbide tipped welded wings on them and are made to actually “cut” their way through 72” DS88R32-72 clay and dirt. Note: Welds do not hold up to percussion 96” DS88R32-96 and only the rotation of the drill is used until you are back in solid rock. Then the bit should be switched out for a tradi- 120” DS88R32-120 tional bit or cross bit.
DRIFTER (CLUB) ROD 1”H R32-R25 10’ CLB-R32-25H-R25-120 1¼”H R38-R32 12’1½” CLB-R38-32H-R32-145 1”H R32-R25 12’1½” CLB-R32-25H-R25-145 1¼”H R38-R32 14’1½” CLB-R38-32H-R32-169 1”H R32-R25 13’1½” CLB-R32-25H-R25-157 1¼”H R38-R32 16’1½” CLB-R38-32H-R32-193 1”H R32-R25 6’4” CLB-R32-25H-R25-76 1¼”H R38-R32 18’1½” CLB-R38-32H-R32-217 1”H R32-R25 8’ CLB-R32-25H-R25-96 1¼”H T38-R32 10’1½” CLB-T38-32H-R32-121 1⅛”H R28-R32 10’1½” CLB-R32-25H-R28-121 1¼”H T38-R32 12’1½” CLB-T38-32H-R32-145 1⅛”H R28-R32 12’1½” CLB-R32-28H-R28-145 1¼”H T38-R32 14’1½” CLB-T38-32H-R32-169 1⅛”H R28-R32 14’1½” CLB-R32-28H-428-169 1¼”H T38-R32 16’1½” CLB-T38-32H-R32-193 1¼”R R32-R22 12’ CLB-R32-32R-R22-144 1¼”H T38-R32 18’1½” CLB-T38-32H-R32-217 1¼”R R32-R25 10’ CLB-R32-32R-R25-120 1¼”R T38-R32 14’ CLB-T38-32R-R32-168 1¼”R R32-R25-8’ CLB-R32-32R-R25-96 1⅜”H R38-R32 18’1½” CLB-R38-35H-R32-217 1¼”H R38-R32 10’1½” CLB-R38-32H-R32-121 1⅜”H T38-R32 16’ 1½” CLB-T38-5H-R32-192
888-883-5144 CROWDERSUPPLY.COM 9 888-883-5144 10 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS 1¼” Rope (R32 or 125 Rope)
ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS REAMING BIT 1½” BCR3238 1⅝” BCR3241 BBR3241 1¾” BCR3245 BBR3245 BBR324545 1⅞” BCR3248 BBR3248 BBR3248RT 2” BCR3251 BBR3251 BBR3251RT 2¼” BCR3257 BBR3257 BBR3257RT 2½” BCR3264 BBR3264 BBR3264RT 2¾” BCR3270 BBR3270 3” BCR3276 BBR3276 BBR3276RT BRR3276 3½” BCR3289 BBR3289 BRR3289 4” BCR32102 BBR32102 BRR32102 4½” BRR32115 5” BRR32127
COUPLING ADAPTORS BIT ADAPTORS CPLR32 1¼” Rope Coupling BAR25-R32 1” Rope—1¼” Rope
CPR32S 1¼” Rope Coupling Square BAR32-R28 1¼” Rope (F) - 1⅛” Rope (M)
CAR25-R32 1” Rope—1¼” Rope BAR32-R25 1¼” Rope (F) - 1” Rope (M) BAR32-R38 1¼” Rope (F) - 1½” Rope (M) CAR28-R32 1⅛” Rope—1¼” Rope BAR32-T38 1¼” Rope (F) - T38 (M) CAR32-R38 1¼” Rope - 1½” Rope BAR32-T45 1¼” Rope (F) - T45 (M) CAR32-T38 1¼” Rope - T38 BAR38-R32 1½” Rope (F) - 1¼” Rope (M) CAR32-T45 1¼” Rope - T45 BAT38-R32 T38 (F) - 1¼” Rope (M) CAR32-T51 1¼” Rope - T51 HOLE SAVERS CAR32-R51 1¼” Rope - 2” Rope HSBR32 Bell Hole Saver—1¼” Rope CAR32-H55 1¼” Rope - H55 HSSR32 Spear Hole Saver—1¼” Rope
STUD ROD ADAPTORS
SRT45-R32 Stud Rod Male/Male Adaptors—T45 to R32
SRT38-R32 Stud Rod Male/Male Adaptors—T38 to R32
SRR32-R25 Stud Rod Male/Male Adaptors—R32 to R25
ER32-32R-8 E x tension Rod with Flatt—R32 to R32
ER32-32R-12 E x tension Rod with Flat—R32 to R32
ER32-32R-12AT E x tension Rod—R32 to R32—Priced per foot
10 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 11 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS 1½” Rope (R38 or 150 Rope)
E X TENSION ROD
1½” Round Single 1½” Round Double 1½” Round Thread Thread All Thread 1’ ER38-38R-12AT
10’ ER38-38R-120 ER38-38R-120 ER38-38R-120AT
12’ ER38-38R-144 ER38-38R-144 ER38-38R-144AT
14’ ER38-38R-168 ER38-38R-168 ER38-38R-168AT
DRIFTER (CLUB) ROD
1¼”H R38-R32 10’1½” CLB-R38-32H-R32-121
1¼”H R38-R32 12’1½” CLB-R38-32H-R32-145
1¼”H R38-R32 14’ 1½” CLB-R38-32H-R32-169
1¼”H R38-R32 16’1½” CLB-R38-32H-R32-193
1¼”H R38-R32 18’1½” CLB-R38-3H-R32-217
ROCK BITS
CROSS BIT BUTTON BIT RETRAC BIT REAMING BIT 2½” BCR3864 BBR3664 BCR3864RT
2¾” BCR3870 BBR3670
3” BCR3876 BBR3676 BCR3876RT
3½” BCR3889 BBR3689 BCR3889RT
4” BCR38102 BBR36102 BCR38102RT BBR38102
COUPLING ADAPTOR BIT ADAPTOR
CPLR38 1½” Rope Coupling BAR25-R38 1” Rope (F) - 1½” Rope (M) BAR32-R38 1¼” Rope (F) - 1½” Rope (M) CAR25-R38 1” Rope—1½” Rope BAR38-R32 1½” Rope (F) - 1¼” Rope (M) CAR32-R38 1¼” Rope—1½” Rope BAR38-T38 1½” Rope (F) - T38 (M) CAR38-T38 1½” Rope—T38 BAR38-T45 1½” Rope (F) - T45 (M) CAR32-R38SQ 1¼” Rope—1½” Rope Square BAR38-R51 1½” Rope—2” Rope (M) CAR38-T45 1½” Rope—T45 HOLE SAVER CAR38-R51 1½” Rope—2” Rope HSBR38 Bell Hole Saver—1½” Rope CAR38-H55 1½” Rope—H55 HSSR38 Spear Hole Saver—1½” Rope
888-883-5144 CROWDERSUPPLY.COM 11 888-883-5144 12 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS T38
E X TENSION ROD 1½” Round 1½” Round 1½” Round Single Thread Double Thread All Thread 1½” Round Male-Female 12” ET38-12AT 24” ET38-24AT 48” ET38-48AT ET38-38R-52MF 60” ET38-60AT ET38-38R-64MF 72” ET38-38R-72 ET38-72AT ET38-38R-76MF
96” ET38-38R-96 ET38-96AT ET38-38R-96MF 120” ET38-38R-120 ET38-38R-120T ET38-38R-120AT ET38-38R-124MF 144” ET38-38R-144 ET38-38R-144T ET38-38R-144AT ET38-38R-148MF 168” ET38-38R-168 ET38-38R-168T ET38-38R-168AT ET38-38R-168MF 192” ET38-38R-192 ET38-38R-192T 216” ET38-38R-216
ROCK BITS DRIFTER (CLUB) RODS CROSS BIT BUTTON BIT RETRAC BITS REAMING BIT 1¼” H T38-R32 6’ CLB-T38-32H-R32-72 2¼” BCT3857 BBT3857 BBT3857RT 1¼” R T38-R32 14’ CLG-T38-32R-R32-168 2½” BCT3864 BBT3864 BBT3864RT 1¼” H T38-R32 10’1½” CLB-T38-32H-R32-121 2¾” BCT3870 BBT3870 BBT3870RT 1¼” H T38-R32 12’1½” CLB-T38-32H-R32-145 3” BCT3876 BBT3876 BBT3876RT 1¼” H T38-R32 14’1½” CLB-T38-32H-R32-169 3½” BCT3889 BBT3889 BBT3889RT 1¼” H T38-R32 16’1½” CLB-T38-32H-R32-193 4” BCT38102 BBT38102 BBT38102RT BRT38102 1¼” H T38-R32-18’1½” CLB-T38-32H-R32-217 4½” BBT38115 BBT38115RT BRT38115 1⅜” H T38-R32-16’1½” CLB-T38-35H-R32-192 5” BBT38127 BBT38127RT BRT38127 1⅜” H T38-R32 18’1½” CLB-T38-35H-R32-217 6” BBT38152 BRT38152 BIT ADAPTORS STUD ROD ADAPTORS BAR25-T38 1” Rope—T38 SRT45-T38 Stud Rod Male/Male Adaptors—T45 to T38 BAR32-T38 1¼” Rope (F) –T38 (M) BAR38-T38 1½” Rope (F) - T38 (M) SRT38-R32 Stud Rod Male/Male Adaptors—T38– R32
BAT38-R32 T38 (F) - 1¼” Rope (M) SRT38-R25 Stud Rod Male/Male Adaptors—T38 to R25 BAT38-R51 T38—2” Rope COUPLING ADAPTORS BAT38-T45 T38– T45 BAT38-T51 T38—T51 CPLT38 T38 Coupling CAT38-T45 T38—T45
BAT45-T38 T45—T38 CAR25-T38 1” Rope—T38 CAT38-T51 T38—T51
HOLE SAVERS CAR32-T38 1¼” Rope—T38 CAT38-R51 T38—2” Rope HSBT38 Bell Hole Saver T38 CAR38-T38 1½” Rope—T38 CAT38-H55 T38– H55 HSST38 Spear Hole Saver T38
12 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 13 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS T45
E X TENSION ROD 1¾” Round 1¾” Round 1¾” Round 1¾” HE X 1¾” ROUND Single Thread Double Thread All Thread SINGLE THREAD MALE—FEMALE 1’ ET45-45R-12AT 2’ ET45-45R-24AT 4’ ET45-45R-48AT ET45-38H-48 6’ ET45-45R-72 ET45-45R-72AT ET45-38H-72 ET45-45R-76MF 8’ ET45-45R-96 ET45-45R-96AT ET45-45R-100MF 10’ ET45-45R-120 ET45-45R-120T ET45-45R-120AT ET45-38H-120 ET45-45R-124MF 12’ ET45-45R-144 ET45-45R-144T ET45-45R-144AT ET45-38H-144 ET45-45R-148MF 14’ ET45-45R-168 ET45-45R-168T ET45-45R-168AT ET45-38H-168 ET45-45R-172MF 20’ ET45-45R-240 ET45-45R-240T ET45-38H-240 ET45-45R-244MF
ROCK BITS CROSS BIT BUTTON BIT RETRAC BIT REAMING BIT 2½” BCT4564 BBT4564 2¾” BBT4570
3” BCT4576 BBT4576 BBT4576RT 3½” BCT4589 BBT4589 BBT4589RT 4” BCT45102 BBT45102 BBT45102RT 4½” BCT45115 BBT45115 BBT45115RT 5” BBT45127 BBT45127RT BRT45127 5½” BBT45170 BBT45140RT 6” BBT45152 BBT45152RT BRT45152 8” BBT45203 BRT45203
COUPLING ADAPTOR BIT ADAPTOR CPLT45 T45 Coupling BAT38-T45 T38 (F) - T45 (M) CAR25-T45 1” Rope—T45 BAR38-T45 1½” Rope (F) - T45 (M) CAR32-T45 1¼” Rope—T45 BAR51-T45 2” Rope—T45 CAR38-T45 1½” Rope—T45 BAH55-T45 H55—T45 CAT38-T45 T38—T45 BAT45-T51 T45 (F) - T51 (M) CAT45-T51 T45—T51 BS-T45-H18 T45 (F) - HL 1800 (M) CAT45-R51 T45—2” Rope BS-T45-H20 T45 (F) - HL 2000 (M) CAT45-H55 T45—H55 BS-T45-T51 T45 (F) - HL T51 (M)
STUD RODS
SRH55-T45 Stud Rod Male/Male Adaptor—H55 to T45 HOLE SAVERS SRT45-R32 Stud Rod Male/Male Adaptor—T45 to 1¼” Rope HSBT45 Bell Hole Saver T45 SRT45-T38 Stud Rod Male/Male Adaptor—T45 to T38 HSST45 Spear Hole Saver T45
888-883-5144 CROWDERSUPPLY.COM 13 888-883-5144 14 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MISCELLANEOUS MINING SUPPLIES Scaling Bars, Miner’s Equipment and Accessories
SCALING BARS Aluminum Black Pipe (1” SCH80) (¾” SCH40) ⅞” He x Solid 1” He x Solid Includes Chisel Includes Chisel Includes Chisel Includes Chisel 5’ SCABL60 SCBBP60 SCB22H60 SCB25H60
6’ SCBAL72 SCBBP72 SCB22H72 SCB25H72 7’ SCBAL84 SCBBP84 SCB22H84 SCB25H84
8’ SCBAL96 SCBBP96 SCB22H96 SCB25H96
10’ SCBAL120 SCBBP120 SCB22H120 SCB25H120
12’ SCBAL144 SCBBP144 SCB22H144 SCB25H144
14’ SCBAL168 SCBBP168
16’ SCBAL192 SCBBP192
CHISELS FOR SCALING BARS DESCRIPTION TYPE OF SCALING BAR
SCB8073 1⅛”Ø X .940 Shank Offset Chisel Aluminum (1” Sch 80)
SCB8073A 1⅛”Ø X .940 Shank Straight Chisel Aluminum (1” Sch 80)
SCB8073B 1⅛”Ø X .940 Shank Point Aluminum (1” Sch 80)
SCB8073S ⅞” He x x .800 Shank Offset Chisel Aluminum (1” Sch 80)
SCB8071 ⅞” He x x .800 Shank Offset Chisel Black Pipe (¾” Sch 40)
SCB8071A ⅞” He x x .800 Shank Straight Chisel Black Pipe (¾” Sch 40)
SCB8071B ⅞” He x x .800 Shank Point Black Pipe (¾” Sch 40)
Scaling bars over 96” long must be shipped LTL freight. Most carriers will charge additional handling to deliver to a mine, quarry, or residence and many will charge even more for long items. Often the shipping costs will e x ceed the cost of the bars on small quantities.
Crowder Supply offers split scaling bars to lessen this freight burden. At your request, we will cut the bar into a UPS shippable lengths and install a machined steel bar so that the longer length can be assembled on site. The cost is $20.00 for each split and is only available on the aluminum scaling bars.
14 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 15 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MISCELLANEOUSDRILL STEEL MINING & BITS SUPPLIES Integral DrillTapered Rod— ReamingRock Bits Equipment
6º and 12º REAMING BUTTON BITS ⅞ x 4¼” x Series 11 6º (SMALL) 12º (LARGE) INT78-S11-34-31 ⅞” X 4¼” X 2’7” X 1-11/32” 2½” BR6DG64 INT78-S11-33-63 ⅞” X 4¼” X 5’3” x 1-19/64” 3” BR6DG76 INT78-S11-32-94 ⅞” X 4¼” X 7’10” x 1¼” 3½” BR6DG89 BR12DG89 INT78-S11-31-126 ⅞” X 4¼” X 10’6” x 1-7/32” 4” BR6DG102 BR12DG102 INT78-S11-30-157 ⅞” X 4¼” X 13’1” x 1-3/16”
REAMING BITS INT78-S11-29-189 ⅞” X 4¼” X 15’9” x 1-9/64” BUTTON BIT 6-WING INT78-S11-220 ⅞” X 4¼” X 18’4” x 1-7/64” 2¼” BR22MM57 BR22MM57-6W INT78-S11-252 ⅞” X 4¼” X 21’ x 1-9/16” 2½” BR22MM64 BR22MM64-6W 3” BR22MM76 BR22MM76-6W
3½” BR22MM89 BR22MM89-62 ⅞ x 4¼” x Series 12
THREADED PILOT ADAPTORS INT78-S12-40-31 ⅞” X 4¼” X 2’7” X 1-37/64”
6º (SMALL) 12º (LARGE) INT78-S12-39-63 ⅞” X 4¼” X 5’3” x 1-17/32” 1” Rope BR-PILOT-R25-6DG BR-PILOT-R25-12DG INT78-S12-38-94 (R25) ⅞” X 4¼” X 7’10” x 1½” 1¼” Rope BR-PILOT-R32-6DG BR-PILOT-R32-12DG INT78-S12-37-126 ⅞” X 4¼” X 10’6” x 1-23/64” (R32) INT78-S12-36-157 ⅞” X 4¼” X 13’1” x 1-27/32”
⅞ x 4¼” x Series 16
INT78-S16-35-24 ⅞” X 4¼” X 2’0” X 1⅜”
INT78-S16-34-48 ⅞” X 4¼” X 4’0” x 1-11/32”
INT78-S16-33-72 ⅞” X 4¼” X 6’0” X 1-19/64”
INT78-S16-32-96 ⅞” X 4¼” X 8;0” x 1¼” PILOT ROD
⅞” X 4¼” 12º CARBIDE INSERT ⅞ x 4¼” x Series 17
PR78-31 Pilot Rod ⅞ x 4¼ - 12º Carbide Insert 2’7” INT78-S17-41-24 ⅞” X 4¼” X 2’0” X 1-5/8” PR78-47 Pilot Rod ⅞ x 4¼ - 12º Carbide Insert 3’11” INT78-S17-40-48 ⅞” X 4¼” X 4’0” x 1-37/64” PR78-63 Pilot Rod ⅞ x 4¼ - 12º Carbide Insert 5’3” INT78-S17-39-72 ⅞” X 4¼” X 6’0” x 1-17/32” PR78-79 Pilot Rod ⅞ x 4¼ - 12º Carbide Insert 6’7” PR78-94 Pilot Rod ⅞ x 4¼ - 12º Carbide Insert 7’10” INT78-S17-38-96 ⅞” X 4¼” X 8’0” x 1½”
TAPERED BIT SHELLS 1 x 4¼” - 1” INTEGRAL DRILL RODS
INT88-41-24 1 X 4¼” X 2’ X 1¾” BR-BS7811-6 Reaming Bit Adaptor—⅞” x 11º INT88-40-48 1 X 4¼” X 4’ x 1-22/32” BR-BS7812-6 Reaming Bit Adaptor—⅞” x 12º INT88-39-72 1 X 4¼” X 6’ x 1-11/18”
BR-BS8811-6 Reaming Bit Adaptor—1” x INT88-38-96 1 X 4¼” X 8’ x 1-21/32” 11º
888-883-5144 CROWDERSUPPLY.COM 15 888-883-5144 16 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILL STEEL & BITS T51
E X TENSION ROD 2” Round 2” Round Single Thread Male—Female 12” ET51-51R-12 144” ET51-51R-144 ET51-51R-148MF 168” ET51-51R-168 ET51-51R-172MF 240” ET51-51R-240 ET51-51R-244MF
ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS REAMING BIT
3” BBT5176
3½” BCT5189 BBT5189 BBT5189RT
4” BCT51102 BBT51102 BBT51102RT
4½” BCT51115 BBT51115 BBT51115RT BRT51115
5” BCT51127 BBT51127 BBT51127RT BRT51127
5½” BBT51140 BBT51140RT BRT51140
6” BBT51152 BBT51152RT BRT51152
8” BBT51203
COUPLING ADAPTORS BIT ADAPTORS CPLT51 T51 Coupling BAT38-T51 T38 (F) - T51 (M)
CAR32-T51 1¼” Rope—T51 BAT45-T51 T45 (F) - T51 (M)
CAT38-T51 T38—T51 BAH55-T51 H55—T51
CAT45-T51 T45—T51 BS-R32-T51 1¼” Rope (F) - T51 (M)
CAT51-R51 T51—2” Rope BS-T38-T51 T38 (F) - HL T51 (M)
CAT51-T76 T51—T76 BS-T45-T51 T45 (F) - HL T51 (M)
STUD RODS HOLE SAVERS
SRH55-T51 Stud Rod Male/Male Adaptors—H55 to T51 HSBT51 Bell Hole Saver T51
SRT51-R51 Stud Rod Male/Male Adaptors—T51 to R51 HSST51 Spear Hole Saver T51
16 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 17 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DRILLS Jack Leg and Stoper Drills MWS83 Jack Leg Drill TUL2B and FL7 Feed Legs This dependable drill is built to hit harder and penetrate rock faster than any other drill on the market. For years it has been the work horse of the mining and con- struction industries. The MWS83F can easily be converted from a Jack Leg drill to a Sinker drill—perfect for quarries and road construction projects. It is a favorite of both drillers and managers for it’s power and low maintenance.
Mid-Western is the OEM of the S83 line of Jack Leg Drills. We manufacture our parts and drills right here in the United States. Our castings are made right here in America and we do all of our own precision machining. It’s no wonder why our drills perform better than any of the foreign competition. Many have tried to copy our drills but none have been able to equal our quality. We have been manufactur- ing reliable equipment for over 65 years and we carry on that tradition today.
TELESCOPIC S83FC Drill Only—Telescopic—⅞” Chuck S83FD Drill Only—Telescopic—1” Chuck S83FC72 Drill Complete with 72” Leg and Swivel S83FD72 Drill Complete with 72” Leg and Swivel S83FC60 Drill Complete with 60” Leg and Swivel S83FD60 Drill Complete with 60” Leg and Swivel S83FC54 Drill Complete with 54” Leg and Swivel S83FD54 Drill Complete with 54” Leg and Swivel S83FC48 Drill Complete with 48” Leg and Swivel S83FD48 Drill Complete with 48” Leg and Swivel S83FC36 Drill Complete with 36” Leg and Swivel S83FD36 Drill Complete with 36” Leg and Swivel S83FC24 Drill Complete with 24” Leg and Swivel S83FD24 Drill Complete with 24” Leg and Swivel POWER RETRACT S83FA Drill Only—Power Retractable—⅞” Chuck S83DA Sinker Drill—Dry ⅞” Chuck S83FB Drill Only—Power Retractable—1” Chuck S83DB Sinker Drill—Dry 1” Chuck S83FA754 Drill Complete with 54” Leg and Swivel S83WA Sinker Drill—Wet ⅞” Chuck S83FB754 Drill Complete with 54” Leg and Swivel S83WB Sinker Drill—Wet 1” Chuck
MWRB83 STOPER DRILL—RB83TUL24 and RB83TUL36 FEED LEGS This dependable drill is built to hit harder and penetrate rock faster than other drill on the market. For years it has been the work horse of the mining and construction in- dustries. The MWRB83 can easily be converted from a Jack Leg drill to a Stoper drill—perfect for quarries and road construction projects. It is a favorite of both drillers and managers for it’s power and low maintenance.
Mid-Western is the OEM of the RB83 line of Stoper Drills. We manufacture our parts and drills right here in the United States. Our castings are made right here in Ameri- can and we do all our own precision machining. It’s no wonder why our dills perform better than any of the foreign competition. Many have tried to copy our drills but none have been able to equal our quality. We have been manufacturing reliable equipment for over 65 years and we carry on that tradition today.
RB83 STOPER DRILL TELESCOPIC FEED LEG
MWRB83A Stoper Drill—⅞ x 4¼” RB83TUL24 Telescopic Feed Leg—24” MWRB83B Stoper Drill—1” x 4¼” RB83TUL36 Telescopic Feed Leg—36”
888-883-5144 CROWDERSUPPLY.COM 17 888-883-5144 18 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
JACK LEGS AND STOPER DRILLS Pneumatic
Stopers are all-steel rock drills designed for production drilling, raise driving and roof bolting. They have a ratchet wheel rotation and a short piston stroke for good penetration rates in soft and medium hard rock. Air blowing through the chuck when drilling cleans and lubricates the drill steel shank.
Water flushed, pusher leg-mounted rock drills are designed for driving drifts and tunnels with a small cross section. These well-proven rock drills are recognized for their high performance and reliability. They are intended for use for a hole diameter range of 1” to 1⅝” with ⅞” rotation shank as a standard. This cost efficient, entry-level rock drill offers a good balance between low air consumption and high penetration.
Air Piston Retract Extract Weight Consum Impact Rate Stroke Bore Length Length Manufacturer Description Part No (lbs) (cfm) (bpm) (in) (in) (in) (in)
Atlas Copco BBC 16W 8311040110 63 146 2340 2 5/32 2¾ 28
BBD 34DSI 8311040806 68 186.5 2280 2¾ 3⅛ 30½
BBC 34W 8311040805 74 186.5 2280 2¾ 3⅛ 30½
BBC 34WS-6 8311010403 100 265 2340 2¾ 3⅛ 63⅜ 93 11/16
BBD 46 WR-6 8311020229 86 190 3000 1¾ 3 56½ 86 25/32
BBD 46WR-8 8311020237 88 190 3000 1¾ 3 65 103 1/3
BBD 46 WS-6 8311020203 86 190 3000 1¾ 3 56½ 86 25/32
BBD 46 WS-8 8311020211 88 190 3000 1¾ 3 65 103 1/3
BBD 94DSI 8311020610 61.7 205.5 3300 1¾ 3 17/32 26⅜
BBD 94W 8311020609 61.7 205.5 3300 1¾ 3 17/32 26⅜
RH 656W 8311030345 48.5 101.7 2040 2 5/6 2 17/32 26
Continental CLD 24 CLD24-100 75 113 1950 2 11/16 2⅝
CLD 24 CLD24-200 57 113 1950 2 11/26 2⅝
CLD 260 CLD260-100 60 126 2050 2 11/26 2¾
CLD 260 CLD260-200 60 126 2050 2 11/26 2¾
CLD 280 CLD280-100 68 151 2050 2 11/16 3
CLD 280 CLD280-200 68 151 2050 2 11/16 3
Piston Feeding Retract Extract Weight Bore Length Length Length Manufacturer Description Part No (lbs) (in) (in) (in) (in) Works with
Atlas Copco BMK 62S 8321010202 37.5 2¾ 51 5/32 71 7/16 122 5/8 RH 656W
ALF 71 8321020194 31 2¾ 51 5/32 17 1/32 122 7/32 BBC 16W Rock Drill ALF 71-1 8321020195 28.5 2¾ 37⅜ 57¼ 94 21/32 BBC 34W Rock Drill BBC 34WS Rock Drill ALF 67/80 8321010185 37.5 3⅛ 73 58 27/32 131⅞
BMT 51 8321030101 33.07 2 11/32 51 5/32 65¼ 116 7/16 BBC 16W Rock Drill
ALF 72D 8321020180 42 2¾ 51 5/21 77 17/32 128 23/32 BBD 34W Rock Drill
ALF l2D-1 8321020181 35 2¾ 47 7/32 72 1/32 119 9/32 BBD 94W Rock Drill Alf 67/80D 8321020169 42 3⅛ 73 62 25/32 135 13/16
XSL-40L Single XSL-40L CLD 24, CLD 260 and CLD 280 Continental D50L Double D50L
18 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 19 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MISCELLANEOUS MINING SUPPLIES Down the Hole Hammers and Bits
Mincon Down-the Hole Hammers are superior but versatile, specifically built for drilling applications where high penetration speeds are vitally important. The unique design concept provides much greater impact energy and ultimate drilling performance for absolute maximum productivity in almost all ground conditions
Mincon hammers maintain excellent operating pressure over an e x tended service life and overall is the tool you require to get the maximum out of all our equipment. Mincon products are all manufactured in- house (Ireland), and processes are carried out under one roof. This guarantees that the quality you expect is always delivered. DESIGN HIGHLIGHTS Patented features maximize energy output and reduce service requirements Fewer internal components to minimize service requirements Valve-less, high-frequency design ensure smooth operation Hardened wear sleeve for optimum wear resistance even in the most abra- sive conditions Multi-start threads on back head and chuck ensure easy coupling and uncou- pling of hammer Unique internal mount system eliminates the need for wear shims and spe- cial assembly tools All critical internal components are heat-treated under strict control to maximize tool longevity An overall cost-effective and user-friendly tool for use in the most demanding conditions OUTSIDE DIA MIN. BIT SIZE LENGTH WEIGHT PART NO DESC. (IN) (IN) (IN) (LBS) 3” SERIES HAMMER MS301AS02 MINCON 3 3.03 3.35 34.0 49 MB301AS02 MINCON 3.5 3.35 .75 33.5 54 MS3J01AS01 MC30 3.03 3.35 34 49 MB301AS03 MP35 3.35 3.75 34.2 54 4” SERIES HAMMER MD401AS16 MC40 3.82 4.33 37.6 85 MD401AS04 4HDS 3.82 4.33 37.6 85 MD401AS08 4HDS 3.82 4.33 37.6 85 MD401AS14 4HDS 3.82 4.33 37.6 85 MD401AS05 4HR 3.82 4.33 37.6 85 MD401AS09 HRSD4 3.82 4.33 38.1 85 5” SERIES HAMMER MB X 501AS08 MC55 4.88 5.5 39.9 152 MP501AS012 MP50 4.53 5.0 39.1 124 MB X 501AS03 MP55 4.88 5.5 39.9 148 MD X 501AS04 5DH MB X 5401AS02 55BH 4.88 5.5 39.9 146 MB X 501AS05 MP55SDS 4.88 5.5 39.9 152
888-883-5144 CROWDERSUPPLY.COM 19 888-883-5144 20 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MISCELLANEOUS MINING SUPPLIES Down-the-Hole Hammers and Bits OUTSIDE DIA MIN. BIT SIZE LENGTH WEIGHT PART NO DESC. (IN) (IN) (IN) (LBS) 6” SERIES HAMMER MD601ASD08 MC60 5.5 6 40.6 201 MD601AS01 6DH 5.5 6 40.6 192 MD601AS02 6DH-LV 5.5 6 40.6 192 MP601AS01 X P60 5.5 6 40.2 190 M3601AS01 6DH360 5.5 6 44.6 210 MD601AS06 6DHSD6 5.5 6 42.7 200 MB601AS04 MC65 535 6 40.6 201 MB601AS01 6BH 5.75 6.25 40.7 216 MB601AS06 6BH-2 PIECE CHUCK 5.75 6.25 40.7 216 MB601AS02 6BHSD6 5.75 6.25 40.7 216 8” SERIES HAMMER MD801AS08 MC80 7.15 7.88 47.4 383 MD801AS01 8DH 7.15 7.88 47.4 385 MD801AS02 MP80 7.15 7.88 47.4 381 MD801AS03 8DHSD8 7.15 7.88 47.5 383 MD801AS07 X P80-QL80 7.15 7.88 47.4 381 MD801AS06 X P80-380 7.15 7.88 47.4 385 12” SERIES HAMMER MD1201AS01 X P120-SD12 10.75 12 56.6 1248 DOWN-THE-HOLE BITS
CONVE X FLAT FACE CONCAVE E X TRA GAUGE SUPPORT Suitable for most drilling Used for general purpose drill- The concave bit design is an e x Providing similar performance to applications, particularly in ing. The flat face design is cellent all around bit, suitable for the concave bit design, the E x hard, abrasive rock to give considered effective in very soft and hard formations. The tra Gauge Support is designed to a combination of speed broken ground as well as hard cone shaped face design pro- provide e x cellent gauge row and good service life. formations that tend to over- vides good stability during drill- carbide protection in highly abra- drill. ing, allowing for straighter holes sive and hard formations. The while reducing equipment vibra- design also gives added gauge tion. The carbide configuration row protection while drilling design gives added penetration through rock seams and chang- in many formations. es in rock hardness. Tungsten Carbide Insert Designs—Mincon can offer a combination of insert shapes in each bit to more precisely match the ground conditions to be drilled. A choice of insert size is offered on bits to suit particular rocks: Dome, Ballistic, Parabolic, Coni- cal and Double Dome. Please see out website or call our offices to find the bit that fits your drill and application.
20 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 21 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
POST DRIVERS Gas Driven
Rhino’s innovative Pro Series Gas Post Drivers are the best in the industry. Their Applications: ergonomic design allows for ease of use; one person can drive a post in seconds. Agriculture In spite of the power offered by the Honda certified 4-stroke engine, handling the Livestock GPD Pro line is very comfortable thanks to Rhino’s CIS™ vibration dampening han- Sign Installation dles. Unlike other post drivers, the Pro series doesn’t require any additional equip- Fence Installation ment. You don’t need to haul around a bulky air compressor, propane tank, or Landscape hydraulic power source; just fill your Pro up with regular unleaded gasoline. Electrical Utility Ground Rod Installation Much more Rhino’s Gas Post Drivers are all made in the United States, for the highest quality workmanship and durability. The materials used in the construction include aircraft -grade aluminum, heat-treated steel, American-made Honda engines, and stainless steel fasteners and bearings. RHINO LIMITED LIFETIME WARRANTY
Free Ground shipping within Continental United States Same day shipping when order placed before 2:00pm MST
RANCH PRO—GPD-30RP FENCE PRO—GPD-40FP MULTIPRO—GPD-45MP & GPD- 45MPXA
Perfect choice for T-post and The first choice of fence contractors Ideal for Rental, Sign Shops, Municipal- Ground Rod 2½” ID chuck equipped with Rhino® ities, DOTs, Tent Stakes, Grape Stakes 1¾” ID Heavy wall chuck with a 1” Chuck-Lok™ adapter system and 2” and many other applications adapter and locking clip for the adapter 2½” ID interchangeable chuck expands toughest applications Delivers more power for tougher jobs range of driving profiles with optional chucks Powerful yet lightweight and ergo- Rhino’s CIS™ Vibration Dampening nomic Equipped with Rhino’s Chuck-Lok™ Rhino’s CIS™ Vibration Dampen- adapter systems and 1”, 1¾”, and 2” ing adapters Rhino’s CIS™ Vibration Dampening ADAPTERS APPLICATION RANCH PRO FENCE PRO MULTIPRO
Ranch Pro Chuck Tube T-Post 300156 Round Post up to 1⅝” Dia.
1” Chuck Adapter w/ Lock Pin - Fits 1¾” Chuck Ground Rods 300897
2” Replacement Chuck Larger T-Posts 300150
1” Chuck Lok™ Adapter—Fits 2” Chuck Ground Rods 300155
1” Chuck Sleeve Ground Rod 300900 300900
1¾” Chuck Sleeve T-Post 300895 300895
2” Chuck Sleeve T-Post 300902 300902
Standard Replacement Chuck 301158
Tent Stake Chuck Tube Tent Stake 301155
ACCESSORIES & REPLACEABLE PARTS
Rhino Formula Grease (10 hr grease) 300500 300500 300500
Service Kit (50 hr) 300505 301505 301506
888-883-5144 CROWDERSUPPLY.COM 21 888-883-5144 22 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
POST DRIVERS Hydraulic
Hydraulic post drivers are perfect for fencing, road signs, farms, ranches, forestry, vineyards, guardrails, anchors, tent stakes—essentially any driving job. Capable of driving nearly any post profile.
Trigger function is mounted directly on the driver for short post driving. Remove Valve versions are equipped with an on/off valve mounted at the end of long tail hose for remote operation on long poles. The post driver is lifted up together with the pole.
FREE ground shipping within Continental United States
Max Working Oil Backflow Impact Activation Hydraulic Part Weight Pressure Flow Pressure Rate Type System No. (lb) (psi) (gpm) (psi) (bpm)
Rhino HPD 60 Trigger w/ 801010 64 1750 8 220 1380 801010 Remote Valve Option
Atlas Copco LPD-T HBP Trigger Open Center 1801404002 68 1500-2000 5-8 400 1500
LPD-RV HBP Remove Valve Open/Closed Center 1801405002 64 1500-2000 5-8 400 1500
LPD-HD-T Trigger Open Center 1801414000 86 1500-1800 8-10 1320
LPD-HD-RV Remove Valve Open/closed Center 1801415000 88 1500-1800 8-10 1320
KAPD-23 Trigger Open Center KAPD23 23 1160-1450 5.3 2400
LPD-LD Handle Bar 1801394006 39 1160-1450 5 150 2300 Ground Rod
Chicago PDR 30T Trigger Open Center 1801394007 39 1160-1450 5 145 2300 Pneumatic
PDR 75T Trigger Open Center 1801404001 71 1525-2030 5-8 365 1680
PDR 75RV Remove Valve Open/closed Center 1801405001 73 1525-2030 5-8 365 1680
PDR 95T Trigger Open Center 1801414001 86 1525-1815 7-11 220 1320
PDR 95RV Remote Valve Open/Closed Center 1801415001 88 1525-1815 7-11 220 1320
ADAPTERS RHINO KAPD-23 ATLAS COPCO & CHICAGO PNEUMATIC KAPD-23
3½” ID Chuck Adapter 70609 Universal Adapter 3371806033
3” ID Chuck Adapter 70610 KAPD23-CK300 2⅛” Square Adapter 3371806032
2½” ID Chuck Adapter 70611 KAD23-CK250 3.8” Round Adapter 3371806034
2¼” Chuck KAPD23-CK225
2” ID Chuck Adapter 70612 2” Round Drive Cap—3” Pin PD-M-51PIN-350
1½” ID Chuck Adapter 70613 GROUND ROD DRIVER ADAPTER CHOICE—LDP-LD
1” ID Chuck Adapter 70617 ⅝” Round Bushing 3371806056 KAPD23GRDC750
⅝” Ground Rod Drive Cap KAPD23GRDC625
⅞” Ground Rod Drive Cap KAPD23GRDC875
Channel Post Chuck Adapter: 1-1.5 lbs/ft Posts 70617 1” Round Bushing 3371806057 KAPD23GRDC100
Channel Post Chuck Adapter: 2-2.75 lbs/ft Posts 70618 Round Driver Head—2½” for Poles 3371806058 or Tubes
Channel Post Chuck Adapter: 3-4 lbs/ft Posts 70619
2” PD 55 Heavy Chuck Adapter 70615 See Page x or Hydraulic Power Pacs, Oil Flow Dividers and Extension Hoses T-Post Chuck KAPD23-CK18
Chuck 2x4 Aluminum KAPD23-CKUCHAN
22 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 23 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
POST DRIVERS Pneumatic
Wide range of drivers...Easily operated by one person, Rhino Post Drivers deliver up to 1700 blows per minute. One moving part, reciprocating piston, strikes directly on the post or drive cap. The drivers have low air consumption rates, are light-weight and hand portable, ideal for driving in places that are hard to reach.
FREE ground shipping within Continental United States
Made in USA
PD-45 Post PD-55 Post PD-110 Post PD-140 Post PD-200 Post PD200 Post Driver Driver Driver Driver Driver Driver Includes 3” Master Includes 3⅞” ID Includes 4¼” ID Includes 4¼” ID Includes 5½” ID Includes 7” ID Master Chuck Master Chuck Master Chuck Master Chuck Master Chuck Chuck
Standard Post 70012 70013 70014 70015 70745 70756 Driver
Specialty Post PD-45 Silt Fence PD140 Heavy PD200S Sheet Drivers Post Driver Duty Sheet Pile Pile Driver 70018 Driver 70753 70017 PD200G 4”x6” PD140 4”x6” Guard Rail Driver Guard Rail Post 70583 Driver 70582 PD200 6”x6” Wood Piling Driv- er 70599
Economy Kit 71272 71273 71274 71275 71297 71298
Transport Kit 71215 71216 71217 71218
Utility Kit 71276 71277 71278 71279 71331 71332
Total Solution 71268 71269 71270 71271 Package
Transport Kit 71282 71283 71284 71285 without Post Driver
Ecoomy Kit Transport Kit Utility Kit Total Solution Package Transport Kit Post driver w/ Master Post Driver w/ Master Post Driver w/ Master Post Driver w/ Master Without Post Driver Chuck Chuck Chuck Chuck Transport Cart Choice of ONE Adaptor Transport Cat Choice of ONE adapter Transport Cart Various Adapters Throttle valve kit w/ 5’ Various Adapters Throttle Valve Kit w/ 5’ Various Adapters Throttle Valve hose whip Throttle Valve Hose whip Throttle Valve Filter-Regulator-Lubricator Filter-Regulator-Lubricator Filter-Regulator-Lubricator Filter-Regulator-Lubricator Filter-Regulator-Lubricator 15’2” Hose Whip 15’2” Hose Whip Carrier for F-R-L 15’2” Hose Whip 15’2” Hose Whip 5’9” Hose Whip Service & Operating In- 15’2” Hose Whip 5’9” Hose Whip 5’9” Hose Whip 1 Qt Non-Detergent Oil structions MP3 Manual Post Puller 1 Qt. Non-Detergent Oil MP3 Manual Post Puller Service & Operating In- 1 Qt Non-Detergent Oil Service & Operating In- MP3 Chain Assembly structions Service & Operating In- structions Post Grabber structions 1 Qt Non-Detergent Oil Service & Operating In- structions
888-883-5144 CROWDERSUPPLY.COM 23 888-883-5144 24 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
POSTHOLE BORERS Hydraulic
LPHB-M Rig Mounted Hydraulic LPHB Post Hole Borer & PHB 3-14 Post Hole Borer Posthole Borer Compact and efficient, this tool drills holes up to 4.3 feet deep and 3.5-13.8 inches in diameter. It offers reverse rotation and The rig-mounted posthole borer is is designed for two-person operation. All augers have inter- mounted directly on the dipper arm changeable bits and point. or under a top plate for quick re- lease coupling of small mini- Visit our website for available augers and bits. excavators and skid-steer loaders weighing 1-3 tons. FREE ground shipping within Continental United States
LPHB Post Hole Borer PHB 3-4 Post Hole Borer LPHB-M Post Hole Borer—Rig Mounted
Manufacturer Atlas Copco Chicago Pneumatic Atlas Copco
Part No. 1806101433 1806101443 1826101437
Weight (lbs) 44 44 68
Working Pressure (psi) 1450-2030 1160-2030 2320
Max Back Pressure (psi) 725 725
Oil Flow (gpm) 20-40 4-11 5.3-15.9
Revolutions (rpm) 90-188 90-240 80-200 POST PULLERS Hydraulic & Manual
PL-3 Hydraulic Post Puller MP-3 Manual Post Puller with Chain 71000 Assy & Post Grabber 71012
Manufacturer: Rhino Pulls a ¾” ground rod, 10 ft deep MP-3 Manual Post Puller Only Height: 36¼” Pulls a 4”x6” steel guard rail post, 3 ft deep 71013 Width x Length: 12” x 12¼” Pulls a standard 4” square wood post, 3 ft deep Hook Opening: 1” Cable: ⅜” Free ground shipping within The MP-3 is capable of pulling the toughest Pulling Stroke: 17” Continental US posts. This puller has phenomenal strength Weight: 35lbs. Made in USA to weight ratios. At 41 lbs, the MP-3 is easily field portable and is equipped to meet PPU 22HD Hydraulic Post Puller most pulling needs. The MP-3 is simple to 1801810004 operate and is built with high-grade materi- als. This unit is nearly indestructible and will provide decades of service.
Manufacturer: Chicago Pneumatic Removing steel or wooden Free ground shipping within Service weight with hose and chains: 132 lbs fence posts, crash carriers, or Continental United States Oil Flow: 5-11 gpm concrete foundations. With 6 Made in USA Working Pressure: 1450-2320 psi tons of pulling power and an Max Back Pressure: 435 psi automatic chain tightening JackJaw T-Post Extractor Lift capacity per stroke: 0.5—7.9” clamp, this post puller has JJ0203 Pulling force: 13,228 lbs the muscle you need to get Full pulling force: 22,046 lbs. the job done.
LPP 10HD Hydraulic Post Puller 1801810003 JackJaw Tent Stake Extractor JJ0301
Manufacturer: Atlas copco The post puller is used by road JackJaw Extractors make an easy task of pulling stakes and posts. Weight: 60 lbs maintenance contractors to With a couple pumps of the handle, stakes and posts break loose. Oil Flow: 5-10 gpm repair barriers. With hardened The jaw and lever mechanism allows you to pull stakes and posts Max Working Pressure: 1450-2320 psi jaws and automatic chain straight up out of the ground without bending them, preserving the Lift Capacity per Stroke: 0.47-7.87” tightening clamp, this post posts and stakes for hundreds of repeated uses. Pulling Force: 13228 lbs puller is ideal for removing all Full Pulling Force: 22046 lbs. kinds of wood or steel post. The JackJaw T-Post Extractor’s horizontal base optimizes it to pull “T”” fence posts, and string line stakes. In concrete applications, Free ground shipping with JackJaw T-Post extractors pull form pins without breaking the fresh in US concrete.
24 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 25 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PAVING BREAKERS Gas Driven These gas-powered motor drill and breakers are a convenient, portable solution for work in remote areas. There’s no need for power packs, air compressors, generators or hoses. Just carry the tool to the jobsite and start working.
Whether you need to cut, break, drill, drive, compact or even tamp railroad ties, these drill/breakers have the right power for the job. No external power source is required, so you can get in and start working quickly. It’s the ideal answer for areas with limited access for larger equipment or jobs that require moving from task to task frequently. APPLICATIONS COBRA Combi COBRA ProE COBRA TTE
Break concrete Breaking concrete Tamping Cut asphalt Cutting asphalt Spiking wooden sleep- Drill Tamping & compacting ers Dig Driving spikes, tubes, Digging cable trenches Split Rocks poles, ground rods and Breaking concrete Drive Posts and Fences probes Cutting and compacting Drive Rods and Spikes Digging ditches and asphalt Tamp and Compact Soil holes Driving posts and fenc- Tamp Ballast/Ties ing
Red Hawk Drill Red Hawk Road Red Hawk Rail Red Hawk Breaker
Installing signposts Breaking concrete and Railway station Dig Breaking small areas of concrete, asphalt Break concrete fencing and digging holes in hard Sidewalk service Tamping around Cut asphalt and frozen ground Pothole repair/tamping switches and cables. Drive posts and fences Installing signs/barriers Drive rods and spikes and fences Driving tent spikes Digging frozen or hard Tamp and compact soil ground Tamp ballast/ties Soil sampling
Impact Blow Fuel Chicago Chuck Size Weight Length Energy Freq. Power Capacity Pneumatic Part No (in) (lbs) (in) (ft/lbs) (bpm) (kW) Motor (gal)
Red Hawk Drill 8318-0900-40 Hex ⅞” x 4¼” 55.1 28.8 16-18 2700 2 185cc, 2 stroke 0.26
Red Hawk Road 8318-0900-29 Hex 1” x 4¼” 48.5 29.3 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Road 8318-0900-27 Hex 1⅛” x 6” 49.6 31.2 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Road 8318-0900-23 Hex 1¼” x 6” 49.9 31.2 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Rail 8318-0900-39 Hex 1” x 4¼” 48.5 29.3 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Rail 8318-0900-37 Hex 1⅛” x 6” 49.6 31.2 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Rail 8318-0900-33 Hex 1¼” x 6” 49.6 31.2 44 1620 1.5 90cc, 2 stroke 0.22
Red Hawk Breaker 8318-0900-02 Hex ⅞” x 4¼” 50.5 27.3 185cc, 2 stroke 0.31
Atlas Copco
Cobra PROe 8318070107 Hex 1⅛” x 6” 55 36.4 60 1440 1 cyl, 2 stroke 0.26
Cobra PROe 8318070103 Hex 1¼” x 6” 55 36.4 60 1440 1 cyl, 2 stroke 0.26
Cobra TTe 8318070117 Hex 1⅛” x 6” 55 36 40 1620 1 cyl, 2 stroke 0.26
Cobra TTe 8318070113 Hex 1¼” x 6” 55 36 40 1620 1 cyl, 2 stroke 0.26
Cobra Combi 2010 8318080010 Hex ⅞” x 4¼” 55 28.81 2600 1 cyl, 2 stroke 0.31
Visit our website for additional information on each model, Parts Breakdowns, Safety & Operating Instructions and accessories
888-883-5144 CROWDERSUPPLY.COM 25 888-883-5144 26 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PAVING BREAKERS Hydraulic Hydraulic paving breakers hit harder than any other type of breaker. That’s because hydraulics are more efficient than electric, pneumatic or gas-driven tools. For example, a 70 lb hydraulic breaker gives you the same hitting power as a 90 lb pneumatic breaker. Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt and frozen ground. You can, of course, also use them for trenching, tie-tamping, spike driving and general demolition.
VR—The sprung handle provides vibration dampening. In addition to this, the handle offers enhanced durability and easy maintenance
HBP—High Back Pressure Breakers. These units are able to work on a maximum return/back pressure of 400 psi (200 psi for non-high back pressure units). Flow requirements of 8 gpm (same as non-high back pressure units) Working pressure at approximately 1500-1800 psi with maximum relief valve setting at 2200 psi. To ensure that the tool is receiving the correct flow of 8 gpm, you will need an Oil Flow Divider (max flow in of 32 gpm; max pressure of 360 psi)...see page xx No Warranty for tools damaged by over-pressure when run without an Oil Flow Divider For John Deere and Bobcat Skidsteers that deliver between 16 and 30 gpm, pressure reduction hoses must be used in conjunction with the Oil Flow Divider
*** FREE ground shipping within Continental United States
Impact Weight Weight Oil Flow Rate Class Manufacturer Description ⅞” x 3¼” Hex 1 x 4¼” Hex 1⅛” x 6” Hex 1¼” x 6” Hex (lbs) (gpm) (bpm)
25 Chicago BRK 25 D 1801174612 34 5 2300 Pneumatic
40 Chicago BRK 40 1801344611 1801344654 801344660 43 5 1400 Pneumatic BRK 40 VR 1801344719 1801344720 1801344721 55 5 1400
Atlas Copco LH 180 1801344336 43 5.3 1300-1400
60 Chicago BRK 55 HBP 1801354742 1801354743 1801354744 50 5-8 1500-2100 Pneumatic BRK 55 VR HBP 1801354732 1801354733 1801354735 62 5-8 1500-2100
BRK 70 HBP 1801364745 1801364737 58.5 5-8 1350-1750
BRK 70 VR HBP 1801364738 1801364740 71.5 5-8 1350-1750
Atlas Copco LH 190 E 1801344341 55.12 5.3 1300-1400
LH 220 HBP 1801354687 1801354688 1801354690 53 7.9 1500-2100
LH 230 E HBP 1801354692 1801354693 1801354695 66 7.9 1500-2100
LH 270 HBP 1801364697 1801364699 58 7.9 1350-1750
Rhino HBR 60 801162 801163 60 8 1260
90 Chicago BRK 95 HBP 1801374685 1801374676 73 8 1150 Pneumatic BRK 95 VR HBP 1801374759 1801374760 86 8 1150-1600
Atlas Copco LH 280 E HBP 1801364701 72 7.9 1350-1750
LH 390 HBP 1801374705 1801374707 73 7.9 1150-1600
LH 400 E HBP 1801374711 86 7.9 1668-1885
RHINO HBR 90 801171 801170 77 8-10 1100-1440
26 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 27 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PAVING BREAKERS Pneumatic
30-35 lb Class Paving Breaker 60 lb Class Paving Breaker 90 lb Class Paving Breaker The 35 lb class demolition tools are light-weight Heavy duty, robust tools well suited Heavy duty, robust tools well suited for yet rugged. They have been designed for light for medium demolition work in con- medium demolition work in construction to medium construction and plant maintenance struction and plant maintenance and plant maintenance such as breaking work, such as light demolition of floors, pave- such as breaking reinforced con- reinforced concrete, heavy road work, ment, macadam, frozen ground and masonry crete, heavy road work, cutting cutting tarmac, frozen ground or non- walls. These tools are also very popular for tarmac, frozen ground or non- consolidated rock and for general demo- bridge deck jobs. consolidated rock and for general lition work. demolition work. By Reducing the in-use vibration value Silencers cut noise emission by up to of the machine, the negative effects of 75% (as compared to the same harmful vibration at a given trigger time. machine without noise reduction) Vibration Reduced machines allow up to Visit our website for additional 7 times the trigger time of conventional information on each model, Parts Silenced Models: fixed-handled machines at a gen level of Breakdowns, Safety & Operating Atlas Copco: TEX PS Models vibration exposure for the operator. Instructions and accessories Chicago Pneumatic: S Series Sullair: S Models Vibration Reduced Models: Atlas Copco—TEX PE Series Chicago Pneumatic—VR Series APT—Airgo Ergonomic Series Sullair—F Models *** FREE ground shipping within Continental United States
Air Impact Weight 1¼” x 6” Weight Consum Rate Class Manufacturer Description ⅞” x 3¼” Hex 1 x 4¼” Hex 1⅛” x 6” Hex Hex (lbs) (cfm) (bpm)
30-35 Chicago CP 0112 8900003023 30 48 1620 Pneumatic CP 0112 EX 8900003024 35 48 1620
CP 0112 S 8900003025 32 48 1620
Atlas Copco TEX 140 PS US 8461022334 34 53 1530
APT 117 5199 5200 33 38 1850
Texas 30# Paving TX30PB-7/8 TX30PB-1 34 49 1550 Pneumatic Breaker
Sullair MPB-30A 68253074 68253075 35.5 37 1850
MPB-35C 68253092 39 49 1200
Toku TPB-30 TPB30-7/8 TPB30-1 33 49 1550
Continental CPB-30 CPB30-300 CPB30-100 33 49 2400
40 Chicago CP 1210 8900003001 44 56.15 1400 Pneumatic CP 1210S 8900003003 8900003007 8900003009 50 56.15 1400
CP 1210 SVR 8900003005 8900003008 8900003010 56 56.15 1400
Atlas Copco TEX 150 PE 8461022335 43 53 1530
TEX 180 PS 8461022434 8461022432 42 55 1500
TEX 190 PE 8461022435 49.6 55 1500
APT 140 17923 43 48 1500
140A 18041 46 48 1500
Texas 40# Paving TX40PBE 42 56 900 Pneumatic Breaker
Toku TPB-40 TPB40-4-1/4 39.6 56 1100
Continental CPB-40 CPB40-100 40 56 900
888-883-5144 CROWDERSUPPLY.COM 27 888-883-5144 28 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PAVING BREAKERS Pneumatic
Air Impact Weight 1¼” x 6” Weight Consum Rate Class Manufacturer Description 1⅛” x 6” Hex Hex (lbs) (cfm) (bpm)
60 Chicago CP 1260 8900003029 8900003028 64 73 1300 Pneumatic CP 1260 S 8900003031 8900003030 68 73 1300
CP 1260 SVR 8900003033 8900003032 74 73 1300
Atlas Copco TEX P60 8461022720 8461022721 75 76 1500
TEX P60S 8461022722 8461022723 80 76 1500 Atlas Copco TEX 230 PE 8461022534 8461022535 60 64 1320 TEX 140-280 Series
TEX 280 PE 8461022632 8461022633 60 68 1230
APT 160 5235 5236 68 65 1680
160A 17746 17747 70 65 1680
Texas 60# Paving Breaker TX60PB-1-1/8 TX60PB-1-1/4 67 59 1400 APT Airgo Ergonomic Pneumatic Paving Breakers Sullair MPB-60A 68253072 68253073 69.5 48 1360
Toku TPB-60 TPB60-1-1/8 TPB60-1-1/4 66 70 1400
Continental CPB-60 CPB60-400 CPB60-500 66 70 1400
Sullair 90 Chicago CP 1290 8900003038 8900003037 82 91 1100 Pneumatic CP 1290 S 8900003040 8900003039 86 91 1100
CP 1290 SVR 8900003042 8900003041 86 91 1100 Texas Pneumatic Paving Breakers Atlas Copco TEX 33 PE 8461022701 8461022700 81.6 72 1200 MADE IN USA
TEX 40 PE 8461022805 8461022804 93 85 1100
TEX P90 8461022820 8461022821 97 85 1260
TEX P90S 8461022822 8461022823 101 85 1260
APT 190 5239 5240 93 80 1350
190A 18618 18619 90 80 1350 APT Standard Paving Breaker Texas 90# Paving Breaker TX90PB-1-1/8 TX90PB-1-1/4 92.5 75 1250 Pneumatic
Sullair MPB60AS 68253082 68253083 71.5 48 1360
MPB-60AF 68255004 68255005 77 48 1360 Model CP 1290 SVR MPB-60AFS 68255008 68255009 78.5 48 1360
MPB 90 AFS 68255006 68255007 101 66 1380
Toku TPB-90 TPB90-1-1/8 TPB90-1-1/4 92.4 77 1250
Continental CPB-90 CPB90-400 CPB90-500 92 80 1250 Visit our website Spike Chicago CP 1260 SPDR 8900003034 65 73 1300 for additional infor- Driver Pneumatic CP 1290 SPDR 8900003043 91 91 1100 mation on each model, Parts Texas 60# Spike Driver TX60SD 60 Pneumatic Breakdowns, Safe- 90# Spike Driver TX90SD 75 ty & Operating In- Continental CSD-60 CSD60 67 70 1400 structions and ac- cessories CSD-90 CSD90 91 80 1400
28 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 29 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PICK HAMMERS Hydraulic
This D-Handle hammer is ideal for horizontal work in brick, mortar and light concrete. It is one of the most powerful pick hammers on the mar- ket. With a detachable front handle, it is a popular choice for renovation, demolition and structural alteration jobs.
*** FREE ground shipping within Continental United States
Impact Pick Hammer Weight Length Chuck Size Rate Manufacturer Description Part No. (lbs) (in) (in) (bpm) Handle Type
Chicago BRK 25D 1801174612 34 25.5 ⅞ x 3¼” 3200 D Handle Pneumatic
Atlas Copco LH 11 1801174118 34.2 25.6 ⅞ x 3¼” 2300 D Handle
PICK HAMMERS Pneumatic The pick hammer was originally designed for use in coal mines, it has now been adapted for use in breaking up concrete structures.. Fitted with D-type handles, they are the lightest and most productive medium-weight pick ham- mers in their class.
*** Free ground shipping within Continental United States
Chuck Air Impact Weight Length Size Consum Air Inlet Rate Handle Manufacturer Description Part No. (lbs) (in) (in) (cfm) (in) (bpm) Type Retainer
Atlas Copco TEX 09P SKL 8461021106 22 20 ⅞ x 3¼ 39 1800 D Handle Latch
TEX 09P S 8461021102 22 20 ⅞ x 3¼ 39 1800 D Handle Screw Cap
TEX 12 PSKL 8461021116 28 21.5 ⅞ x 3¼ 45 1600 D Handle Latch
Sullair MDT 22 68255010 24.7 20 ⅞ x 3¼ 33.4 ⅜” NPTF 1450 D Handle Quick Change or ⅞-24
Continental CA-7A CA7A 20 18.25 35 ¾” NPTF 1250 D Handle Bee Hive
Visit our website for additional information on each model, Parts Breakdowns, Safety & Operating Instructions and accessories
888-883-5144 CROWDERSUPPLY.COM 29 888-883-5144 30 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CLAY AND TRENCH DIGGERS Pneumatic
When it comes to digging packed soil and clay from around forms, footers, or any other con- struction area, you can be sure there is a digger to meet your needs.
Fitted with a D-type handle, the digger is ideal for light horizontal work, as well as for digging medium to lightly packed soil, for light demolition work and for tunneling around exist- ing foundations or with a T-type handle for digging clay, shale, hard pan, and frozen ground. This tool is ideal for utilities, pipeline contractors and landscape contractors.
*** FREE ground shipping within Continental United States
Chuck Air Impact Weight Length Size Consum Air Inlet Rate Handle Manufacturer Description Part No. (lbs) (in) (in) (cfm) (in) (bpm) Type Retainer
Chicago CP 0222 CHIT 8900000121 22 20 ⅞ x 3¼ 40 ½” NPTF 1500 D Handle Latch Pneumatic CP 0222 CHITBS 8900000122 24.3 20 ⅞ x 3¼ 40 ¾” NPTF 1500 D Handle Latch
CP 0222 CHOTBS 8900000123 24.3 20 ⅞ x 3¼ 40 ¾” BSP 1500 D Handle Latch
CP 0122S 8900000143 24.3 22.2 ⅞ x 3¼ 46.6 ¾” BSP 1380 D Handle Screw Cap
CP 0122SVR 8900000145 29.8 26.2 ⅞ x 3¼ 44 ¾” BSP 1380 D Handle Screw Cap
CP 0111 CHIT 8900000141 29 22.2 ⅞ x 3¼ 45 ⅜” NPTF 1800 D Handle Latch
CP 0111 CHLA 8900000120 29 23 1 x 4¼ 45 ⅜” NPTF 1800 D Handle Latch
Atlas Copco TEX 12PE 8461021138 23 23 ⅞ x 3¼ 42 1620
APT 125 5211 31 18.5 ⅞ x 3¼ 42 ½” NPTF 2120 D Handle Latch
118 5201 32 22.5 ⅞ x 3¼ 34 ⅜” NPTF 1850 D Handle Latch
118 5202 31 22.5 1 x 4¼ 36 ⅜” NPTF 1850 D Handle Latch
119 Trench Digger 5203 37 31 ⅞ x 3¼ 38 ½” NPTF 1850 T Handle Latch
119 Trench Digger 5204 37 31 1 x 4¼ 38 ½” NPTF 1850 T Handle Latch
Texas TX30 TX30CD-7/8 30 23 ⅞ x 3¼ 49 ⅜” NPTF 1550 D Handle Latch Pneumatic TX30 TX30CD-1 30 23 1 x 4¼ 49 ⅜” NPTF 1550 D Handle Latch
TX30 TX30CD-7/8 30 23 ⅞ x 3¼ 49 ⅜” NPTF 1550 D Handle Latch
Sullair MCD 30 68253088 33.75 24 ⅞ x 3¼ 37 ⅜” NPTF 1850 D Handle Latch
MCD 30 68253089 33.75 24 1 x 4¼ 37 ⅜” NPTF 1850 D Handle Latch
Tamco CD-20 CD20-7/8 22 20 ⅞ x 3¼ 38 ½” NPTF 2000 D Handle Latch
CD-30 CD30-7/8 30 22 ⅞ x 3¼ 49 ⅜” NPTF 1550 D Handle Latch
CD-30 CD30-1 30 22 1 x 4¼ 49 ⅜” NPTF 1550 D Handle Latch
TD-30 Trench Digger TD30-1 36 29 1 x 4¼ 49 ⅜” NPTF 1550 T Handle Latch
TD30 Trench Digger TD30-7/8 36 29 ⅞ x 3¼ 49 ⅜” NPTF 1550 T Handle Latch
Continental CCD-20B CCD20B 19 18.5 ⅞ x 3¼ 40 ⅞-24 NPTF 1560 D Handle Latch
CCD-20A CCD20A 19 18 1 x 4¼ 40 ⅞-24 NPTF 1850 D Handle Latch
CCD-30 CCD30-300 30 22 ⅞ x 3¼ 49 ⅜” NPTF 2400 D Handle Latch
CCD-30 CCD30-100 30 22 1 x 4¼ 49 ⅜” NPTF 2400 D Handle Latch
CTD-35 Trench Digger CTD30-300 36 29 ⅞ x 3¼ 49 ½” NPTF 2400 T Handle Latch
CTD-35 Trench Digger CTD30-100 36 29 1 x 4¼ 49 ½” NPTF 2400 T Handle Latch
30 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 31 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Jackhammer, Paving Breaker Tools & Bits
PAVING BREAKER TOOLS
SHANK
SIZE LENGTH MOIL POINT NARROW CHISEL 3” CHISEL 14” PB77-MP-14 PB77-NC-14 PB77-3C-14 18” PB77-MP-18 PB77-NC-18 PB77-3C-18 ⅞” X 3¼” 24” PB77-MP-24 PB77-NC-24 PB77-3C-24 36” PB77-MP-36 PB77-NC-36 PB77-3C-36 14” PB78-MP-14 PB78-NC-14 PT78-3C-14 ⅞” X 4¼” 18” PB78-MP-18 PB78-NC-18 PT78-3C-18 14” PB88-MP-14 PB88-NC-14 PB88-3C-14 18” PB88-MP-18 PB88-NC-18 PB88-3C-18 24” PB88-MP-24 PB88-NC-24 PB88-3C-24 36” PB88-MP-36 PB88-NC-36 PB88-3C-36 1” X 4¼” 48” PB88-MP-48 PB88-NC-48 PB88-3C-48 60” PB88-MP-60 PB88-NC-60 PB88-3C-60 72” PB88-MP-72 PB88-NC-72 PB88-3C-72 96” PB88-MP-96 PB88-NC-96 PB88-3C-96 14” PB98-MP-14 PB98-NC-14 PB98-3C-14 18” PB98-MP-18 PB98-NC-18 PB98-3C-18 24” PB98-MP-24 PB98-NC-24 PB98-3C-24 36” PB98-MP-36 PB98-NC-36 PB98-3C-36 1⅛” X 6” 48” PB98-MP-48 PB98-NC-48 PB98-3C-48 60” PB98-MP-60 PB98-NC-60 PB98-3C-60 72” PB98-MP-72 PB98-NC-72 PB98-3C-72 96” PB98-MP-96 PB98-NC-96 PB98-3C-96 14” PB108-MP-14 PB108-NC-14 PB108-3C-14 18” PB108-MP-18 PB108-NC-18 PB108-3C-18 24” PB108-MP-24 PB108-NC-24 PB108-3C-24 36” PB108-MP-36 PB108-NC-36 PB108-3C-36 1¼” X 6” 48” PB108-MP-48 PB108-NC-48 PB108-3C-48 60” PB108-MP-60 PB108-NC-60 PB108-3C-60 72” PB108-MP-72 PB108-NC-72 PB108-3C-72 96” PB108-MP-96 PB108-NC-96 PB108-3C-96 Electric 14” Breaker 1⅛” x 6 “ With slot PB98-MP-14SL PB98-NC-14SL PB98-3C-14SL
888-883-5144 CROWDERSUPPLY.COM 31 888-883-5144 32 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Jackhammer, Paving Breaker Tools & Bits PAVING BREAKER TOOLS
TARMAC CUTTER SHANK 10½” Under Collar RAILROAD SPIKE SIZE ASHALT CUTTER BUSHING TOOLS DIGGING CHISEL 4½” Blade DRIVER ⅞” X 3¼” PB77-AC PB77-BH PB77-DC PB77-PIKE
⅞” X 4¼” PB78-AC PB78-BH PB78-DC
1 X 4¼” PB88-AC PB88-BH PB88-DC PB88-SPIKE
1⅛” X 6” PB98-AC PB98-BH PB98-DC PB98-TC PB98-SPIKE
1¼” X 6” PB108-AC PB108-BH PB108-DC PB108-TC PB108-SPIKE
Electric Breaker PB98-ACSL 1⅛” x 6” With slot
PAVING BREAKER TOOLS
TIE TAMPING TOOL SHANK SIZE ASPHALT WEDGE FROST WEDGE CONCRETE BREAKER 18”
1 X 4¼” PB88-AW PB88-FW PB88-CB
1⅛” X 6” PB98-AW PB98-FW PB98-CB
1¼” X 6” PB108-AW PB108-FW PB108-CB PB108-TT
CLAY SPADE U-CHANNEL AND PIPE DRIVERS
SHANK SIZE 4½” BLADE 5½” BLADE 8” BLADE SHANK SIZE ⅞” x 3¼” PB77-CS-45 PB77-CS-55 ⅞” x 4¼” Shank Only PD78-PIPE ⅞” x 4¼” PB78-CS-55 1” x 4¼” Shank Only PD88-PIPE 1” x 4¼” PB88-CS-45 PB88-CS-55 1⅛” X 6” Shank Only PD98-PIPE 1⅛” X 6” PB98-CS-45 PB98-CS-55 PB98-CS-80 1¼” X 6” Shank Only PD108-PIPE 1¼” X 6” PB108-CS-45 PB108-CS-55 PB1080-CS-80
Electric Breaker Cup Only—2⅝” PB98-CS-55SL Cup PD-PIPE-CUP 1⅛” X 6” w/ Slot ID
32 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 33 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Jackhammer, Paving Breaker Tools & Bits TAMPING PADS—Use with Large Detachable Shanks—See Post Driver Pisge
PAD SIZE ROUND SQUARE SHOE 6” PB-TAMP-LT-6RD PB-TAMP-LT-6SQ 2” PB-SHOE-2 7” PB-TAMP-LT-7RD 3” PB-SHOE-3 8” PB-TAMP-LT-8SQ
GROUND ROD DRIVER—3” Depth
⅝” 11/16” PB77-GR-625 ⅞ X 3¼ ¾” 13/16” PB77-GR-750 ⅝” 11/16” PB88-GR-625 ¾” 13/16” PB88-GR-750 1 x 4¼” ⅞” 15/16” PB88-GR-875 1” 1-1/16” PB88-GR-100
⅝” 11/16” PB98-GR-625 ¾” 13/16” PB98-GR-750 1⅛ x 6” ⅞” 15/16” PB98-GR-875 1” 1-1/16” PB98-GR-100 ⅝” 11/16” PB108-GR-625 ¾” 13/16” PB108-GR-750 1¼ x 6” ⅞” 15/16” PB108-GR-875
1” 1-1/16” PB108-GR-100
PLUG & FEATHERS
1½” SHANK 1½” FEATHERS 2” SHANK 2” FEATHERS
1⅛” x 6” PB88-SHK-150 PB98-FTH-150 PB98-SHK-200 PB98-FTH-200
1¼” x 6” PB108-SHK-150 PB108-FTH-150 PB108-SHK-200 PB108-SHK-200
888-883-5144 CROWDERSUPPLY.COM 33 888-883-5144 34 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Post Driving Tools U-CHANNEL AND PIPE DRIVERS DETACHABLE SHANK
SHANK SIZE SHANK ⅞” x 4¼” Shank Only PD78-PIPE SIZE SMALL TAPER LARGE TAPER
1” x 4¼” Shank Only PD88-PIPE ⅞ x 3¼” PB77-DS-ST PB77-DS 1⅛” X 6” Shank Only PD98-PIPE ⅞ x 4¼” PB78-DS-ST PB78-DS 1¼” X 6” Shank Only PD108-PIPE 1 X 4¼” PB88-DS-ST PB88-DS Cup Cup Only—2⅝” ID PD-PIPE-CUP 1⅛ x 6” PB98-DS
MANUAL DRIVE CAPS 1¼ x 6” PB108-DS Pins and Squares will run 1/32” small and cups will run 1/32” larger than pipe size SQUARE POST DRIVERS Use with Detachable Shank
PIPE SIZE MATERIAL ID SIZE OD PIN SQUARE
1½” 3½” PD-M-38PIN PAD 1¾” 3½” PD-M-45PM PD-M-45SQ SIZE SMALL TAPER LARGE TAPER 2” 3½” PD-M-51PIN PD-M-51SQ 1½” PD-ST-38SQ PD-LT-38SQ
PB-M-51PIN-350 1¾” PD-ST-45SQ PD-LT-45SQ 2¼” 3½” PD-M-57PIN PD-M-57SQ 2” PD-ST-51SQ PD-LT-51SQ 2½” 3½” PD-M-64PIN PD-M-64SQ 2¼” PD-LT-57SQ 3” 3½” PD-M-76PIN PD-M-76SQ 4” 5” PD-M-102PIN 2½” PD-LT-64SQ
PIN DRIVERS—1” DEPTH ROUND PIPE DRIVERS (For large taper shank) Use with Detachable Shank PIN
SIZE 1 X 4¼” 1⅛” X 6” 1¼” X 6”
⅝” PB88-PD625 PB98-PD625 PB108-PD625 PAD ¾” PB88-PD750 PB98-PD750 PB108-PD750 SIZE CUP PIN ⅞” PB88-PD875 PB98-PD875 PB108-PD875 1¼” PD-LT-32CUP 1” PB88-PD100 PB98-PD100 PB108-PD100 1½” PD-LT-38CUP 1¼” PB88-PD125 PB98-PD125 PB108-PD125 2” PD-LT-51CUP PD-LT-51PIN 1½” PB88-PD150 PB98-PD150 PB108-PD150 2½” PD-LT-64CUP PD-LT-64PIN 1¾” PB88-PD175 PB98-PD175 PB108-PD175 2” PB88-PD200 PB98-PD200 PB108-PD200 3” PD-LT-76CUP PD-LT-76PIN 2½” 4” PD-LT-102CUP PB88-PD250 PB98-PD250 PB108-PD250 (2 pc)
34 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 35 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
RIVET BUSTERS Pneumatic
Pound for pound, there is no hammer with more hitting power than a rivet buster. Even a paving breaker would need to be at least twice as heavy to deliver an equivalent blow. This super-power can still be controlled thanks to low blow frequency and teasing throttle. That’s why the rivet buster is one of the favorite tools of demolition contractors in the U.Sl
Users have discovered many new applications for rivet busters for working in both concrete and steel. No longer is the buster used exclusively by iron workers for forming and cutting rivets, but has now found its way into the hands of operators who need the most powerful tool for the job.
Air Impact Stroke Weight Length Consum Air Inlet Rate Handle Hoses (in) Manufacturer Description Part No (lbs) (in) (cfm) (in) (bpm) Type Included
6 Chicago Pneumatic CP 4160 9245999917 25 44 1100 D Handle
Atlas TEX 626RD 9245998662 26 20.2 42 1200 D Handle No Copco TEX 626RP 9245998981 26 20.5 44 1200 Pistol No
APT 633 18341 28 20.5 42-46 ½” NPTF 1100 YES
Texas 6” Rivet Buster TX133-6RB 26 20.5 44 ⅜” NPTF 1500 D Handle YES Pneumatic 6” Rivet Buster TX133-6RB-OT 26 20.5 44 ⅜” NPTF 1500 Pistol YES
Sullair MDT 30 68255011 33 24.5 37.1 ⅜” NPT or ⅞-24 1000 No
Tamco RB70D RB70D 30 29.25 37 ⅜” NPTF 940 D Handle No
RB70 RB70 28 19.75 67 ⅜” NPTF 940 Pistol No
8 Chicago CP 4608 P 8900000149 30 38 ½” NPTF 1080 Pistol No Pneumatic CP 4608D 8900000151 31 38 ½” NPTF 1080 D Handle No
Atlas TEX 830RD 9238981775 30 22.5 44 1140 D Handle No Copco TEX 803RP 9246020659 30 22.5 44 1140 Pistol No
APT 133 5216 30 22.5 42-46 ½” NPTF 1140 YES
Texas 8” Rivet Buster TX133-8RB 30 22.5 44 ⅜” NPTF 1400-1600 D Handle YES Pneumatic 8” Rivet Buster TX133-8RB-OT 30 22.5 44 ⅜” NPTF 1400-1600 Pistol YES
Sullair MRB 8 02250094-894 30 22.5 44 ½” NPTF 1140 No
Tamco RB 133 RB133 30 22 44 ⅜” NPTF 950 D Handle No
RB 91 HPD RB91HPD 32 23 36 ⅜” NPTF 700 D Handle No
RB 91 HP RB91HP 32 23 36 ⅜” NPTF 700 Pistol No
Continental CRB 8 CRB8 30 44
11 Chicago CP 4611 P 8900000150 33 40 ½” NPTF 720 D Handle No Pneumatic CP 4611D 8900000152 34 40 ½” NPTF 720 Pistol No
Atlas TEX 1133 RD 9238981785 33 25.5 50 850 D Handle No Copco TEX 1133 RP 9246020660 33 25.5 50 850 Pistol No
APT 1133 17399 33 25.25 50 ½” NPTF 850 YES
Texas 11” Rivet Buster TX133-11RB 33 25.5 44 ⅜” NPTF 850 D Handle YES Pneumatic 11” Rivet Buster TX133-11RB-OT 33 25.5 44 ⅜” NPTF 850 Pistol YES
Sullair MRB 11 02250094-895 33 25.5 50 ½” NPTF 850 No
Tamco RB 1133 RB1133 34 25 39 ⅜” NPTF 850 D Handle No
RB 110D RB110D 35 26 32.9 ⅜” NPTF 680 D Handle
RB 110 RB110 35 26 32.9 ⅜” NPTF 680 Pistol No
Continental CRB 11 CRB11 35 50
888-883-5144 CROWDERSUPPLY.COM 35 888-883-5144 36 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Rivet Buster Tools RIVET BUSTER TOOLS
STANDARD—80 X JUMBO—11 X (Uncommon Size) (Most Common Size)
WORKING END LENGTH BLANK
12” RB80 X -BLK-12 RB11 X -BLK-12
POINT 9”/10” RB80 X -MP-9 RB11 X -MP-10
12” RB80 X -MP-12 RB11 X -MP-12
18” RB80 X -MP-18 RB11 X -MP-18
NARROW CHISEL 9”/10” RB80 X -NC-9 RB11 X -NC-10
12” RB80 X -NC-12 RB11 X -NC-12
18” RB80 X -NC-18 RB11 X -NC-12 SIDE CUT CHISEL
18” RB80 X -SC-18 RB11 X -SC-18 RIPPER
12” RB11 X -RIP-12
BACK OUT PUNCHES
STANDARD—80 X JUMBO—11 X (Uncommon Size) (Most Common Size)
RIVET SIZE LENGTH
⅜” 9/10” RB80 X -BP375-9 RB11 X -BP3756-10
½” 9/10” RB80 X -BP500-9 RB11 X -BP500-10
¾” 9/10” RB80 X -BP750-9 RB11 X -BP750-10
⅞” 9/10” RB80 X -BP875-9 RB11 X -BP875-10
HEAT E X CHANGER ORDER ON REQUEST PUNCHES
36 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 37 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CHIPPING HAMMERS Pneumatic—2” Stroke
Chicago Pneumatic Chipping Hammers Atlas Copco Chipping Hammers CP 0012—the new addition to the CP range of pneumatic hammers for TEX 05PE—so light you can do overhead work and still light chipping and scaling duties. Since the CP 0012 is light and has have great control when renovating outdoors and in- medium hitting power, it is very easy to handle and control for more doors. The round retainer is comfortable to hold and precise jobs. Typical applications include alteration work, hole marking thanks to HAPS, both hands are saved from vibration. and trimming TEX 317, 318, and 419 are powerful chipping hammers CP 4123—The most popular CP chipping hammer of all times, the CP equipped with rugged handles. Designed to provide 4123is used for a wide variety of construction and industrial applica- years of trouble-free service, these hammers are tions, from light to medium chipping to heavy cutting. equipped with oil-resistant neoprene exhaust deflec- tors. CP 4125—The extra features of the CP 4125 make it more suitable for tough construction and industrial applications, including foundries, ship- yards, refineries, or fabrication shops. Even in hot, dirty working condi- tions, the reliable CP 4125 will consistently hit hard and last longer than conventional hammers
CP 4130—The CP 4130 hammer is designed to tackle punishing jobs with the hard chipping, cutting and trimming operations. The four bolt handle provides higher air flow and durability.
CP 4132—A durable 4-bolt chipping hammer with inside trigger and standard retainer.
Air Impact Manufac- .580 Hex .680 Rnd Weight Length Consum Rate turer Description Part No Part No (lbs) (in) (cfm) (bpm) Handle Retainer
Chicago CP 0012 8900000103 8900000102 12 20 2600 D Standard Pneumatic CP 4123 2H/2R 8900000105 8900000104 13 25 2400 Pistol Standard
CP 4125 2H/2R 8900000111 8900000110 13 26 2400 Pistol Standard
Atlas TEX 05P 8461021901 8461021903 12 15 20 2760 D Cap Copco TEX 317 9238981760 9238981750 17 15 32 2200 Pistol Standard
TEX 317 D 9245998305 9245998306 17 15.25 36 2200 D Standard
APT 652 6299 68255000 12 13..25 32-34 2100 Pistol Oval
Texas 4 Bolt Chipping Ham- TXCH2-4B-H TXCH2-4B-R 18 32-34 2100 4 Bolt Quick Pneumatic mer Chipping Hammer TXCH2-H TXCH2-R 15.7 32 2100 Pistol Quick
Sullair MCH 2 HX/RD-OV 68252243-001 38252240-001 16 14 34 3600 D Solid
MCH2 HX/RD-RD 68252243-002 68252240-002 16 14 34 3600 D Solid
MLC 10 HEX/RD 68255001 68252240-004 12 14.5 17 2940 D Ball Type
Tamco AA-OS AA-OS-H AA-OS-R 7.9 12.75 22.95 3000 Pistol Ball Type
THA-1B THA-1B-H THA-1B-R 14.8 15.25 28 2500 Pistol Solid
THA-2B THA-2B-H TH-2B-R 15.8 16.25 29.75 2300 Pistol Solid
TCH-2 4 Bolt CH2-H CH2-R 18 14.75 29.75 2800 D Solid
Continental CFH2-HX-RD/Std CFH2-H-SR 5298 19 15.5 28 2000 D Ball Type
CH2A—HX-RD/Std CH2A-H-SR CFH2-R-SR 13 13.75 30 2300 Pistol Solid
CH2A-HX-RD/Ball CH2A-H-BR CH2A-R-SR 13 13.75 30 2300 Pistol Solid
CFH2-HX-RD/Ball CFH2-H-BR CFRH2-R-BR 19 15.5 28 2000 D Solid
Visit our website for additional infor- mation on each model, Parts Break- downs, Safety & Operating Instruc- tions and accessories
888-883-5144 CROWDERSUPPLY.COM 37 888-883-5144 38 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CHIPPING HAMMERS Pneumatic—3” Stroke
APT Chipping Hammers Texas Pneumatic Model 260 Series—2 Bolt, D Handle Complete range of chipping hammers for all types of construction and Patented ball valve industrial applications Ball-type throttle valve 4-bolt design for longer life of handle Drop forged steel and collar Quick change retainer for ease in change of tools Replaceable nose bushing Hose swivel so hose tracks operator movement 2 bolt design for easier field maintenance Lubricator to enhance tool life Adjustable exhaust deflector Rugged construction for use in shipyards, refineries and oil field equipment manufacturers Model 650 Series Texas Pneumatic is proud to offer Flapper valve design chipping hammers completely made in Traditional pistol grip handle made from drop forged steel the USA. We will guarantee the quality Deep case hardened alloy steel cylinder of this chipping hammer versus any Replaceable nose bushing chipping hammer in the world. Adjustable exhaust deflector 4-bolt hammers include TX4HW Hose Tool comes standard with oval collar retainer, locking spring and Whip assembly, a deluxe quick-change 6’ x ½” Whip Hose Assy with ½” NPT Swivel retainer, and a 12” moil point and standard chisel.
Manufac- Description .580 Hex .680 Rnd Weight Length Air Consum Impact Rate Handle Retainer turer Part No Part No (lbs) (in) (cfm) (bpm)
Chicago CP 0017 SVR 8900000137 8900000136 26 1920 VR Standard Pneumatic CP 4123 3H/3R 8900000107 8900000106 14.3 26 1920 Pistol Standard
CP 4125 3H/3R 8900000113 8900000112 14.3 27 1920 Pistol Standard
CP 4130 3H/3R 8900000117 890000016 18.5 26 1920 D Standard
CP 4131 3H/3R 8900000134 8900000133 19 1900 D Ball
CP 4132 3H/3R 9245999799 9245999800 15 33.23 1800 D Std Spring
Atlas TEX 318 9238981765 9245996940 18 16 32 2200 Pistol Standard Copco TEX 318 D 9245998307 9245998307 18 16 36 2200 D Standard
APT 263 18670 18667 14 14.5 33-35 1650 D Oval
653 5301 5300 14 15.25 33-35 1650 Pistol Oval
Texas Chipping Hammer TXCH3-H TXCH3-R 16.7 33 1650 Pistol Quick Pneumatic
Sullair MCH 3 HX-RD/Ball 68252244-004 68252241-004 17.75 15.25 33 2280 D Ball Type
MCH 3 HX-RD/OV 68252244-001 68252241-001 17.75 15.25 33 2280 D Solid
MCH 3 HX-RD/RD 68252244-002 68252241-002 17.75 15.25 33 2280 D Solid
MCH 3S HX-RD/Ball 68252250-004 68252247-004 19.75 17 33 2280 D Ball Type
Tamco THA-3B THA-3B-H THA-3B-R 16.5 17.5 31.8 2200 Pistol Solid
TCH-3 4 Bolt CH3-H CH3-R 16 19 31.5 2200 D Solid
Continental CFH3-HX/Std CFH3-H-SR CFH3-R-SR 20 16.5 32 1900 D Solid
CH3A-HX/Std CH3A-H-SR CH3A-R-SR 14 14.75 31 2200 Pistol Ball Type
CH3A-HX/Ball CH3A-H-BR CH3A-R-BR 14 14.75 31 22 Pistol Solid
CFH3—HX/Ball CFH3-H-BR CFH3-R-BR 20 16.5 32 1900 D Ball Type
Visit our website for additional information on each model, Parts Breakdowns, Safety & Op- erating Instructions and accessories
38 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 39 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CHIPPING HAMMERS Pneumatic—4” Stroke Sullair Chipping Hammers Tamco Chipping Hammers Continental Chipping Hammers MCH Series—Oval collars retainers are AA-OS—proves bigger is not always bet- CFH Series—This tool is designed as a included as standard. Universal ball type, ter. It’s light weight and compact size heavy-duty chipping hammer. It used on round collars, or quick change segment allows for greater flexibility when working the toughest of construction. The CFH retainers are optional. in tight spaces or small enclosures. The series of chipping hammers is a light AA-OS is small on size but big on power. weight tool used on bridge deck jobs and Our 4-bolt back head design reduces jobs that require use of bushing tools. handle breakage and eliminates the com- THA Series—THA series utilizes a saw mon problem of a threaded handle-to- tooth connection between the handle and CH-A Series—This chipping hammer is barrel connection coming loose, damaging cylinder which provides a more secure, used for scaling, chiseling and trimming the handle and internal parts. The strong positive fit. The THA series chipping through heavy cutting in foundaries, fabri- “D” configuration provides a comfortable, hammers feature cation shops and construction jobs. sure grip even for a gloved hand. allow steel drop forged handles, replaceable bushings, heat treated 4-bolt back head alloy cylinders, reliable ring valve D-handle design, and exhaust deflectors. Minimal lubrication required Optional quick connect retainers Smoother operation are available for all models. Rotatable exhaust deflector TCH Series—Rugged “D” Handle chipping 2 air inlet bushing hammers feature drop forged handles, Limited parts warranty replaceable bushing, heat treated alloy cylinders and exhaust deflectors. The TCH line of hammers features a rock solid four bolt handle for maximum reliability and durability which allows a sure grip in all conditions.
Air Impact .580 Hex .680 Rnd Weight Length Consum Rate Manufacture Description Part No Part No (lbs) (in) (cfm) (bpm) Handle Retainer
Chicago CP 4123 4H 8900000109 8900000108 27 27 1500 Pistol Standard Pneumatic CP 4125 4H 8900000115 8900000114 28 28 1500 Pistol Standard
CP 4130 4H 8900000119 8900000118 19.5 27 1500 D Standard
CP 4132 4H 9245999880 9245999898 15 33.23 1800 D Std Spring
Atlas Copco TEX 319 9245998414 9245998415 19 15.25 32 2200 Pistol Standard
TEX 319 Ball 9245998731 9245998664 19 15.25 32 2200 Pistol Ball
TEX 419 4 Bolt 9245998379 9245998378 19 16 36 1800 4 Bolt Standard
TEX 419 4 Bolt 9245999210 9245999211 19 16 36 1800 4 Bolt Ball
APT 264 18671 18668 15 15.5 34-36 1375 D Oval
654 5303 5302 16 16 34-36 1375 Pistol Oval
Texas 4 Bolt Chipping Hammer TXCH4-4B-H TXCH4-4B-R 20 34-36 1375 4 Bolt Quick Pneumatic Chipping Hammer TXCH4-H TXCH4-R 18.1 34 1375 Pistol Quick
Sullair MCH 4 HX/OV 68252245-001 68252242-001 18.5 16.5 30 1800 D Oval
MCH 4 HX/RD 68252245-002 68252242-002 18.5 16.5 30 1800 D Solid
MCH 4 HX/Ball 68252245-004 68252242-004 18.5 16.5 30 1800 D Ball Type
MCH 4S HX/Ball 68252251-004 68252248-004 20.75 18 30 1800 D Ball Type
Tamco THA-4B THA-4B-H THA-4B-R 18.25 18.75 33.25 1800 Pistol Solid
TCH-4 4 Bolt CH4-H CH4-R 20 17 33.25 1800 D Oval
Continental CFH 4-HX/Std CFH4-H-SR CFH--R-SR 22 18.5 33 1500 D Oval
CH4A-HX/Std CH4A-H-SR CH4A-R-SR 16 16.75 33 1800 Pistol Oval
CH4A—HX/Ball CH4A-H-BR CFH4-R-BR 16 16.75 33 1800 Pistol Ball
888-883-5144 CROWDERSUPPLY.COM 39 888-883-5144 40 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Chipping Hammer Tools CHIPPING HAMMER TOOLS
Working End Length Round Shank Round Shank He x Shank He x Shank (in) Oval Collar Round Collar Oval Collar Round Collar BLANK 8½ CH680-BLK-8 CH680R-BLK-8 CH580-BLK-8 CH580R-BLK-8 11½ CH680-BLK-12 CH680R-BLK-12 CH580-BLK-12 CH580R-BLK-12 MOIL POINT 9 CH680-MP-9 CH680R-MP-9 CH580-MP-9 CH580R-MP-9 12 CH680-MP-12 CH680R-MP-12 CH580-MP-12 CH580R-MP-12 18 CH680-MP-18 CH680R-MP-18 CH580-MP-18 CH580R-MP-18 24 CH680-MP-24 CH680R-MP-24 CH580-MP-24 CH580R-MP-24 36 CH680-MP-36 CH680R-MP-36 CH580-MP-36 CH580R-MP-36 48 CH680-MP-48 CH680R-MP-48 CH580-MP-48 CH580R-MP-48 60 CH680-MP-60 CH680R-MP-60 CH580-MP-60 CH580R-MP-60 72 CH680-MP-72 CH680R-MP-72 CH580-MP-72 CH580R-MP-72
NARROW CHISEL 9 CH680-NC-9 CH680R-NC-9 CH580-NC-9 CH580R-NC-9 12 CH680-NC-12 CH680R-NC-12 CH580-NC-12 CH580R-NC-12 18 CH680-NC-18 CH680R-NC-18 CH580-NC-18 CH580R-NC-18 24 CH680-NC-24 CH680R-NC-24 CH580-NC-24 CH580R-NC-24 36 CH680-NC-36 CH680R-NC-36 CH580-NC-36 CH580R-NC-36 48 CH680-NC-48 CH680R-NC-48 CH580-NC-48 CH580R-NC-48 60 CH680-NC-60 CH680R-NC-60 CH580-NC-60 CH580R-NC-60 72 CH680-NC-72 CH680R-NC-72 CH580-NC-72 CH580R-NC-72 1½” CHISEL 9 CH680-C38-9 CH680R-C38-9 CH580-C38-9 CH580R-C38-9 12 CH680-C38-12 CH680R-C38-12 CH580-C38-12 CH580R-C38-12 18 CH680-C38-18 CH680R-C38-18 CH580-C38-18 CH580R-C38-18 2” CHISEL 9 CH680-C51-9 CH680R-C51-9 CH580-C51-9 CH580R-C51-9 12 CH680-C51-12 CH680R-C51-12 CH580-C51-12 CH580R-C51-12 18 CH680-C51-18 CH680R-C51-18 CH580-C51-18 CH580R-C51-18 2½” CHISEL 9 CH680-C64-9 CH680R-C64-9 CH580-C64-9 CH580R-C64-9 12 CH680-C64-12 CH680R-C64-12 CH580-C64-12 CH580R-C64-12 18 CH680-C64-18 CH680R-C64-18 CH580-C64-18 CH580R-C64-18 3” CHISEL 9 CH680-C76-9 CH680R-C76-9 CH580-C76-9 CH580R-C76-9 12 CH680-C76-12 CH680R-C76-12 CH580-C76-12 CH580R-C76-12 18 CH680-C76-18 CH680R-C76-18 CH580-C76-18 CH580R-C76-18 BUSHING TOOL 1 PC CH680-BH-1PC CH680R-BH-1PC CH580-BH-1PC CH580R-BH-1PC
CARBIDE INSERT CH680-BH-CARBIDE CH680R-BH-CARBIDE CH580-BH-CARBIDE CH580R-BH-CARBIDE 4½” CLAY SPADE 10 CH680-C5115 CH680R-C5115 CH580-C5115 CH580R-C5115 CP-9 CHISEL 10” CP9-NC-10 CP-9 POINT 10” CP9-MP-10
40 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 41 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK DRILLS Hydraulic For efficient drilling without a large compressor, count on these drills. They are perfect for construction and utility work, as well as other applications. Choose these handy tools for drilling blast, anchor, and rock splitting holes and experience less hassle and more productivi- ty. Light to work with and using hydraulic power for impact and rotation, they will drill diame- ters of up to 2” and depths down to approximately 19.7’ with standard integral steel. A small additional compressor is needed for flushing.
Torque limiter prevents operator kick-back Anti-clockwise (left) rotation as an option A drifter version for separate operation of impact and two-way rotation is available COUNTER CLOCKWISE ROTATION STANDARD
RDR 48R is a rig version of the RDR 48M. There are no handles and the on/off connection block is replaced with a connection block for both the impact mechanism and the rotation function. It is often seen mounted on small, custom -made drill rigs for dowel drilling, dimensional stone and bridge repair applications. Used in construction, utility, quarry and other applications requiring heavy-duty drilling for blast and anchor holes.
*** FREE ground shipping within Continental United States Impact Revolu- Weight Length Oil Flow Working Press Rate tions Manufacture Description Part No Chuck Size (lbs) (in) (gpm) (psi) (bpm) (rpm)
Chicago RDR 48M 1801380005 ⅞ x 4¼” 57 24 5-7 1450-2030 2550 320-400 Pneumatic RDR 48R 1801036001 ⅞ x 4¼” 53 21.1 5-7 1450-3020 2550 320-400
Atlas Copco LHD 23M 1801380002 ⅞ x 4¼” 57 5-7 1450-2030 2550 320-400 ROCK DRILLS Pneumatic—9 lb Class
These versatile tools are both a drill and a chipping hammer. With the CP 0009A and F, and APT 109, a push of the rotation release button easily and quickly converts the tool to a chipping ham- mer.
These rotary hammers are designed for a wide variety of construction and maintenance applica- tions such as driving or setting masonry anchors and drilling holes in concrete, bricks, or rock. As a hammer, these tools can be used for chipping, scarifying, scaling and cleaning welds.
Whip Hose is not included—sold separately Visit our website for addi- tional information on each ***FREE ground shipping within Continental United States model, Parts Breakdowns, Safety & Operating Instruc- tions and accessories
Air Impact Weight Length Consum Air Inlet Rate Manufacture Description Part No Chuck Size (lbs) (in) (cfm) (in) (bpm) Retainer
Chicago CP 0009 AC Z0027413 C9 Chuck 8.8 14.75 20 ⅜” NPTF 3400 Quick Change Pneumatic CP 0009 A T022083 C9 Chuck 8 14.75 20 ⅜” NPTF 3400 Quick Change
CP 0009 F T022511 Spline 9 14.75 20 ⅜” NPTF 3420 Quick Change
CP 0009 CS T022322 C9 Chuck 9.9 14.75 20 ⅜” NPTF 3420 Quick Change
Atlas Copco DKR36R 8463010350 C9 Chuck 10 14.75 21.3 ⅜” NPTF 2820 Quick Change
APT 109 17643 C9 Chuck 9 15 21 ⅜” NPTF 3400 Quick Change
Sullair MRD9 68252232 C9 Chuck 9 15⅛ 21 ⅜” NPTF 2800 Quick Change
MRD9 68252239 9/16 x 1¾ 9 15⅛ 21 ⅜” NPTF 2800 Quick Change
Tamco/Toku CP9-A RD-9CP C9 Chuck 8 14¾ 20 ½” NPTF 3400 Quick Change
888-883-5144 CROWDERSUPPLY.COM 41 888-883-5144 42 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK DRILLS Pneumatic—15 lb Class These 15 lb Class drills are light weight that is able to get into smaller spaces. They are designed for drilling in soft to medi- um hard rock, as well a variety of construction and maintenance applications such as driving or setting masonry anchors and drilling holes in concrete, brick or rock. The CP 0014 RR, and APT 115 have a rotation release button that easily and quickly converts the tool to a chipping hammer. As a hammer, it can be used for chipping, scarifying, scaling and cleaning welds. Texas Pneumatic TX 18HD and 30# rock drills are manufactured and assembled in the United States. It is made from the highest quality material to provide industrial quality performance.
The 30 lb class drills provide drilling capability for holes up to 1¾” diameter, 8 feet deep. This is the ideal choice where a light weight and powerful tool is needed in public works, utility and drilling from scaffolding. They are also great for road building, shaft sinking, quarrying, as well as general demolition or construction work.
BBD 12D and 12T—Light and easy to handle, BBD rock drills are ideal for those quick jobs and for working in difficult to get to areas. The ratchet wheel action provides faster rotation and higher impact frequency for drilling in soft to medium hard rock. Equipped with a “D” type handle, it is used for horizontal drilling, plug hole drilling, and drilling in concrete with a maximum depth of 1 meter. Equipped with “T” handles, the BBD 12T is designed for vertical drilling of up to 3 meters. BBD 15E has a combined “T/D Handle” for easy carrying and is equipped with spring-dampened handles and a highly effective silencer.
Manufacturer Description Part No Weight Length Chuck Air Air Inlet Impact Rotation (lbs) (in) Size Consum (in) Rate Speed (in) (cfm) (bpm) (rpm)
Chicago CP 0014 RR T022173 11 18.5 ⅞ x 3¼” 46.6 ⅝” NPTF 2520 165 Pneumatic
APT 115 5197 19 18⅜ ⅞ x 3¼” 36 ⅝” NPTF 2900
Texas TX 18HD TX18HD 17.75 18.375 ⅞ x 3¼” 36 ⅝” NPTF 29000 Pneumatic
Tamco THD-1100N RD15-7/8N 11.4 16-17/32 ⅞ x 3¼” 28.3 ½” NPT 3200 350
Continental CRD 15 CRD16-300 16 29 ⅞ x 3¼” 36 ⅜” NPTM 2900 270
CRD 15 CRED16-200 16 29 ⅞ x 4¼” 36 ⅝” NPTM 2900 270 ROCK DRILLS Pneumatic—30 lb Class
Manufacturer Description Part No Weight Length Chuck Air Air Inlet Impact Rotation (lbs) (in) Size Consum (in) Rate Speed (in) (cfm) (bpm) (rpm)
Chicago CP 0022 8900002001 33 18.7 ⅞ x 3¼” 46.6 ½” Swivel 2220 232 Pneumatic CP 0022 8900002002 33 19.7 ⅞ x 4¼” 46.6 ½” Swivel 2220 232
Atlas Copco BBD 12D 8311010247 22 22.25 ¾ x 4¼” 51.1 ⅝” NPTF 2580 220
BBD 12DS (Silenced) 8311010280 24 22.25 ¾ x 4¼” 46.9 ⅝” NPTF 2520 220
BBD 12T-01 8311010295 24 20 ⅞ x 4¼” 51.1 ⅝” NPTF 2580 220
BBD 12TS-01 (Silenced) 8311010298 27 20 ⅞ x 4¼” 46.9 ⅝” NPTF 2520 220
BBD 15E 8311010402 34 22.75 ¾ x 4¼” 47 ⅝” NPT 2520 220
BBD 15E 8311010409 34 22.75 ⅞ x 3¼” 47 ⅝” NPT 2520 220
BBD 15E 8311010410 34 22.75 ⅞ x 4¼” 47 ⅝” NPT 2520 220
BBD 15ET 8311010413 34 22.75 ⅞ x 4¼” 47 ⅝” NPT 2520 220
Texas 30# Rock Drill TX29RD-3-1/4 30 18.5 ⅞ x 3¼” 56 ½” NPTM 2450 250 Pneumatic 30# Rock Drill TX29RD-4-1/4 30 18.5 ⅞ x 4¼” 56 ½” NPTM 2450 250
Sullair MRD 30 68252230 34 21 ⅞ x 3¼” 53 ¾” NPT 2300
MRD 30 68252231 34 21 ⅞ x 4¼” 53 ¾” NPT 2300
Tamco TJ-15 RD30-7/8 30.8 18.5 ⅞ x 3¼” 56 ¾” NPT 2450 250
TJ-15 RD30-7/8x4 30.8 18.5 ⅞ x 4¼” 56 ¾” NPT 2450 250
Continental CRD 30 - Dry CRD30-300 29 19.5 ⅞ x 3¼” 81 ¾” NPTM 3300 270
CRD 30—Dry CRD30-200 29 19.5 ⅞ x 4¼” 81 ¾” NPTM 3300 270
42 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 43 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK DRILLS Pneumatic—40-50 lb Class
The 40 lb Class Rock drill is used in general construction, utility work, and plant maintenance. It is designed for drilling through granite, hard faced rock, quarry drilling and drilling secondary holes for blasting. It is also used with dowel hole drilling machines.
The 50 lb Class Rock Drill - Sinker Drill—are used in quarry, mine and general excavation work.
Atlas Copco’s RH Drills are designed for heavier jobs such as bench and secondary drilling, plus drilling for smooth blasting. RH drills have a robust rifle-bar rotation mechanism and high impact energy for drilling hard rock. All models are equipped with “T” handles for solid and comfortable grip.
*** FREE ground shipping within Continental United States Air Impact Weight Length Consum Air Inlet Rate Manufacture Description Part No Chuck Size (lbs) (in) (cfm) (in) (bpm) Retainer
CP CP 0032 T022319 1 x 4¼” 57.30 23 102 ¾” Swivel 2100 Latch
CP 0032 T022318 ⅞ x 3¼” 54 22 102 ¾” Swivel 2100 Latch
CP 0032 T022117 ⅞ x 4¼” 57.3 22.6 102 ¾” Swivel 2100 Latch
CP 0032 EZ T025299 ⅞ x 3¼” 56.2 103 2200 Beavertail
CP 0032 S T025431 ⅞ x 4¼” 61.7 22.6 102 ¾” Swivel 2100 Latch
Atlas Copco RH 658L 8311030289 1 x 4¼” 53 22.25 123.5 ¾” NPT 2040
RH 568L 8311030286 ⅞ x 4¼” 53 22.25 123.5 ¾” NPT 2040
RH 571-5L 8311030129 ⅞ x 4¼” 39 20 83 ¾” NPT 2100
RH 571-5LS 8311030137 ⅞ x 4¼” 42 20 83 ¾” NPT 1980
RH 572E 8311030178 ⅞ x 4¼” 50 23 79 ¾” NPT 2040
APT 137 5225 ⅞ x 4¼” 38 19.75 90 ½” NPTM 2300 Latch
137 5227 1 x 4¼” 38 19.75 90 ½” NPTM 2300 Latch
137 5223 ⅞ x 3¼” 38 19.75 90 ½” NPTM 2300 Latch
137 Wet 5226 ⅞ x 4¼” 38 19.75 90 ½” NPTM 2300 Latch
137 Wet 5228 1 x 4¼” 38 19.75 90 ½” NPTM 2300 Latch
137 Wet 5224 ⅞ x 3¼” 38 19.75 90 ½” NPTM 2300 Latch
Sullair MRD 40 68252228 ⅞ x 4¼” 45.5 23 80 ¾” NPT 1800 Latch
MRD 40 68252229 1 x 4¼” 45.5 23 80 ¾” NPT 1800 Latch
MRD 40 68252227 ⅞ x 3¼” 45.5 23 80 ¾” NPT 1800 Latch
MRD 50 68252224 ⅞ x 3¼” 48.5 23.25 99 ¾” NPT 1800 Latch
MRD 50 68252225 ⅞ x 4¼” 48.5 23.25 99 ¾” NPT 1800 Latch
MRD 50 68252226 1 x 4¼” 48.5 23.25 99 ¾” NPT 1800 Latch
Tamco TJ-20 RD40-7/8 ⅞ x 3¼” 40.7 24 87.5 ¾” NPT 2400
TJ-20 RD30-7/8x4 ⅞ x 4¼” 40.7 24 87.5 ¾” NPT 2400
Continental CRD 55—Dry CRD55-100 1 x 4¼” 53 24 113 ¾” NPTM 1590 Beavertail
CRD 55—Dry CRD55-300 ⅞ x 3¼” 53 24 113 ¾” NPTM 1590 Beavertail
Visit our website for addi- tional information on each model, Parts Breakdowns, Safety & Operating Instruc- tions and accessories
888-883-5144 CROWDERSUPPLY.COM 43 888-883-5144 44 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK DRILLS Pneumatic—60 lb Class
The 60 lb Class Rock Drills are used in general construction, utility work, and plant maintenance. They are designed for drilling through granite, hard faced rock, quarry drilling and drilling secondary holes for blasting. They are also used with dowel hole drilling machines. They are suited for drilling 2½” diameter holes 20 feet deep.
*** FREE ground shipping within Continental United Stated.
Chuck Air Impact Weight Length Size Consum Air Inlet Rate Manufacturer Description Part No (lbs) (in) (in) (cfm) (in) (bpm) Retainer
Chicago CP 0069 T006661 60.6 24 ⅞ x 4¼” 129 ¾” Swivel 1920 Latch Pneumatic CP 0069 T022259 60 24 1 x 4¼” 129 ¾” Swivel 1920 Latch
CP 0069—Wet T025423 60.6 24 ⅞ x 4¼” 129 ¾” Swivel 1920 Latch
Atlas Copco RH 658 LS 8311030287 55 22.25 ⅞ x 4¼” 12.5 ¾” NPT 2040 Latch
APT 155 5231 61 22.5 ⅞ x 4¼” 120 ¾” NPTM 2100 Latch
155 5233 61 22.5 1 x 4¼” 120 ¾” NPTM 2100 Latch
155 5229 61 22.5 ⅞ x 3¼” 120 ¾” NPTM 2100 Latch
155—Wet 5232 61 22.5 ⅞ x 4¼” 120 ¾” NPTM 2100 Latch
155—Wet 5234 61 22.5 1 x 4¼” 120 ¾” NPTM 2100 Latch
155—Wet 5230 61 22.5 ⅞ x 3¼” 120 ¾” NPTM 2100 Latch
Texas 60# Rock Drill TX60RD-4-1/4 61 23.75 ⅞ x 4¼” 98 ¾” NPT 2250 Latch Pneumatic 60# Rock Drill TX60RD-1 61 23.75 1 x 4¼” 98 ¾” NPT 2250 Latch
60# Rock Drill TX60RD-3-1/4 61 23.75 ⅞ x 3¼” 98 ¾” NPT 2250 Latch
Sullair MRD 55 02250094-892 56 23.75 ⅞ x 4¼” 95 ¾” NPT 1650 Latch
MRD 55 02250094-891 56 23.75 1 x 4¼” 95 ¾” NPT 1650 Latch
MRD 60 02550162-655 60 22 ⅞ x 4¼” 91 ¾” NPT 1800 Latch
MRD 60 02250162-654 60 22 1 x 4¼” 91 ¾” NPT 1800 Latch
Tamco TS-55 RD60-7/8x4 59.4 22.5 ⅞ x 4¼” 91.81 ¾” NPT 1800 Latch
TS-55 RD60-1 59.4 22.5 1 x 4¼” 91.81 ¾” NPT 1800 Latch
TS-55 RD60-7/8x3 59.4 22.5 ⅞ x 3¼” 91.81 ¾” NPT 1800 Latch
Continental CRD 55—Dry CRD55-200 53 24 ⅞ x 4¼” 113 ¾” NPTM 1950 Beavertail
CRD 75—Dry CRD75-300 61 23.75 ⅞ x 3¼” 120 ¾” NPTM 1950 Yoke
CRD 75—Dry CRD75-200 61 23.75 ⅞ x 4¼” 120 ¾” NPTM 2400 Yoke
CRD 75—Dry CRD75-100 61 23.75 1 x 4¼” 120 ¾” NPTM 2400 Yoke
Visit our website for addi- tional information on each model, Parts Breakdowns, Safety & Operating Instruc- tions and accessories
44 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 45 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES H—D—E Steel & Bits
THREAD THREAD DIMENSIONS THREAD PITCH A B C PER INCH
H 0.998 1⅜” 0.711 6
D 1.180 0.868 1¾” 5
E 0.623 ⅞” 0.711 6 H thread steel is the most common steel and bits for contractors using hand-held percussive rock drills in the US. The bit threads up to the shoulder of the steel and percussive shock wave is transferred through the shoulder to the face of the bit. It is available in all 3 standard rock drill shank sizes—⅞” x 4¼”, ⅞” x 3¼”, and 1 x 4¼” and is intended for general duty use. Bits are available from 1⅜” to 3” diameter and come in the following configurations: Full carbide cross bits—Most common H thread bit as it has a deep carbide insert which will last longer and holds the gauge of the hole better Shallow carbide cross bits—Good for hard rock and the short tungsten carbide inserts will deliver a moderate service life Carbide button bits—Available in 1⅜” to 2¼” diameter and prove to be more effective in very hard rock, espe- cially when using the heavier classes of rock drills All steel—Good for concrete and very soft rock applications or occasional to rare usage. You can e x pect a much shorter service life than a carbide bit, but there are instances when they may prove to be more economi- cal.
For challenging drilling conditions, production drilling and/or when larger holes are necessary we recommend a stronger steel with a more durable thread profile, see: 1” Rope-R25-100 Rope or 1¼” Rope-R32-125 Rope
For drilling small holes, see: Whirly Bits
H THREAD STEEL
LENGTH ¾” X 4¼” ⅞” X 3¼” ⅞” X 4¼” 1 X 4¼”
1’ DS68H-12 DS77H-12 DS78H-12 DS88H-12 1½’ DS68H-18 DS77H-18 DS78H-18 DS88H-18 2’ DS68H-24 DS77H-24 DS78H-24 DS88H-24 2½’ DS77H-30 DS78H-30 DS88H-30 3’ DS77H-36 DS78H-36 DS88H-36 4’ DS77H-48 DS78H-48 DS88H-48 5’ DS77H-60 DS78H-60 DS88H-60 6’ DS77H-72 DS78H-72 DS88H-72 8’ DS77H-96 DS78H-96 DS88H-96 10’ DS77H-120 DS78H-120 DS88H-120 12’ DS77H-144 DS78H-144 DS88H-144 14’ DS77H-168 DS78H-168 DS88H-168
888-883-5144 CROWDERSUPPLY.COM 45 888-883-5144 46 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES H—D– E Steel and Bits D THREAD STEEL E THREAD STEEL
LENGTH ¾” X 4¼” ⅞” X 3¼” ⅞” X 4¼” 1 X 4¼” LENGTH ¾” X 3¼” 1’ DS68D-12 DS77HD12 DS78D-12 DS88D-12 1’ DS77E-12 1½’ DS68D-18 DS77D-18 DS78D-18 DS88D-18 1½’ DS77E-18 2’ DS68D-24 DS77D-24 DS78D-24 DS88D-24 2’ DS77E-24 2½’ DS88D-30 2½’ DS77E-30 3’ DS88D-36 3’ DS77E-36 4’ DS88D-48 4’ DS77E-48 5’ DS88D-60 5’ DS77E-60 6’ DS88D-72 6’ DS77E-72
H THREAD BITS
BIT DIA. CARBIDE SHALLOW (IN) CARBIDE CROSS BITS INSERT BUTTON BITS ALL STEEL BITS 1⅜ BCH35 BCH35S BBH35 BSH35 1½ BCH38 BCH38S BBH38 BSH38 1⅝ BCH41 BCH41S BBH41 BSH41 1¾ BCH45 BCH45S BBH45 BSH45 1⅞ BCH48 BBH48 BSH48 2 BCH51 BCH51S BBH51 BSH51 2⅛ BCH54 2¼ BCH57 BBH57 BSH57 2⅜ BCH60 2½ BCH64 BBH64 BSH64 2⅝ BCH67 BSH67 2¾ BCH70 3 BCH76 D THREAD BITS E THREAD BITS BIT DIA. (IN) CARBIDE CROSS BITS ALL STEEL BITS BIT DIA. (IN) ALL STEEL BITS
1¾ BCD45 BSD45 15/16 BSE23 1⅞ BCD48 BSD48 1 BSE26 2 BCD51 BSD51 1⅛ BSE28 2¼ BCD57 BSD57 1¼ BSE32 2⅜ BCD60 2½ BCD64 BSD64 2⅝ BCD70 BSD70 3 BCD76 BSD76 Carbide Cross Bit 3½ BCD89 BSD89 All Steel Bit Carbide Shallow Insert 4 BSD102 Button Bit
46 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 47 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Carbide Tipped Whirly Bits STANDARD HE X SHANK
DRILL BIT SIZE DEPTH ⅞” X 3¼” ⅞” X 4¼” 1” X 4¼”
6 WB77-625-6 WB78-625-6
9 WB77-625-9 WB78-625-9 5/8” 14 WB77-625-14 WB78-625-14
20 WB77-625-20 WB78-625-20
6 WB77-750-6 WB78-750-6
9 WB77-750-9 WB78-750-9 WB88-750-9
14 WB77-750-14 WB78-750-14 WB88-750-14
3/4” 20 WB77-750-20 WB78-750-20 WB88-750-20
26 WB77-750-26 WB78-750-26 WB88-750-26
33 WB77-750-33 WB78-750-33
45 WB77-750-45 WB78-750-45
6 WB77-875-6 WB78-875-6 WB88-875-6
9 WB77-875-9 WB78-875-9 WB88-875-9
14 WB77-875-14 WB78-875-14 WB88-875-14 ⅞” 20 WB77-875-20 WB78-875-20 WB88-875-20
26 WB77-875-26 WB78-875-26 WB88-875-26
33 WB77-875-33 WB78-875-33 WB88-875-33
45 WB77-875-45 WB78-875-45
9 WB77-100-9 WB78-100-9 WB88-100-9
14 WB77-100-14 WB78-100-14 WB88-100-14
20 WB77-100-20 WB78-100-20 WB88-100-20 1” 26 WB77-100-26 WB78-100-26 WB88-100-26
33 WB77-100-33 WB78-100-33 WB88-100-33
45 WB77-100-45 WB78-100-45
9 WB77-1125-9 WB78-1125-9 WB88-1125-9
14 WB77-1125-14 WB78-1125-14 WB88-1125-14
20 WB77-1125-20 WB78-1125-20 WB88-1125-20 1⅛” 26 WB77-1125-26 WB78-1125-26 WB88-1125-26
33 WB77-1125-33 WB78-1125-33 WB88-1125-33
45 WB77-1125-45 WB78-1125-45
888-883-5144 CROWDERSUPPLY.COM 47 888-883-5144 48 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CONSTRUCTION SUPPLIES Carbide Tipped Whirly Bits STANDARD HE X SHANK DRILL BIT SIZE DEPTH ⅞” X 3¼” ⅞” X 4¼” 1” X 4¼” 9 WB77-1250-9 WB78-1250-9 WB88-1250-9 14 WB77-1250-14 WB78-1250-14 WB88-1250-14 20 WB77-1250-20 WB78-1250-20 WB88-1250-20 1¼” 26 WB77-1250-26 WB78-1250-26 WB88-1250-26 33 WB77-1250-33 WB78-1250-33 WB88-1250-33 45 WB77-1250-45 WB78-1250-45 WB88-1250-45 15 WB77-1875-15 WB78-1875-15 1-3/16” 21 WB77-1875-21 WB78-1875-21 9 WB77-1375-9 WB78-1375-9 WB88-1375-9 14 WB77-1375-14 WB78-1375-14 WB88-1375-14 1⅜” 20 WB77-1375-20 WB78-1375-20 WB88-1375-20 26 WB77-1375-26 WB78-1375-26 WB88-1375-26 9 WB77-1500-9 WB78-1500-9 WB88-1500-9 14 WB77-1500-14 WB78-1500-14 WB88-1500-14 1½” 20 WB77-1500-20 WB78-1500-20 WB88-1500-20 26 WB77-1500-26 WB78-1500-26 WB88-1500-
C-9 WHIRLY BITS ACCESSORIES DRILL DEPTH BIT SIZE CP-9A CP9A Taper Adaptor 8” 5/16” WB44-0-3154 CP-9B CP9B Taper Adaptor 8” 3/8” WBCP9-375-8 DK-1 Drift Key 8” 7/16” WB44-0-3156 8” 15/32” WB44-0-3157 8” 1/2” WBCP9-500-8 10” 1/2” WBCP9-500-10 8” 5/8” WBCP9-625-8 12” 5/8” WBCP9-625-12 18” 5/8” WBCP9-625-18 PROBLEM SOLVED? 8” 3/4” WBCP9-750-8 We specialize in the hard to 12” 3/4” WBCP9-750-12 find. Don’t see what you 18” 3/4” WBCP9-750-18 need? We will find it!
8” ⅞” WBCP9-875-8 Can’t fine it? We will built it! 12” ⅞” WBCP9-875-12 18” ⅞” WBCP9-875-18
48 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 49 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DARDA ROCK SPLITTER
DARDA ROCK SPLITTERS
Enormous splitting force up to 413 tons Dust-free and near silent operation Vibration free Light weight Precision work Always controllable For use in close quarters and hard to access places
Easy handling GAS POWERED ROCK SPLITTING TOOL ASSEMBLY Powered by 3.75 Hp Briggs & Stratton Engine (5 gal. pump) D01-12 Size 12 Darda Splitter—Complete Unit D01-9 Size 9 Darda Splitter—Complete Unit D01-2 Size 2 Darda Splitter—Complete Unit D01 Hydraulic Power Unit Only, 3.75 Hp Briggs & Stratton Gas Engine, 5 gal. Reservoir AIR POWERED ROCK SPLITTING TOOL ASSEMBLY Powered by 3 Hp air motor, large reservoir (5 gal. pump) D02-12 Size 12 Darda Splitter—Complete Unit D02-9 Size 9 Darda Splitter—Complete Unit D02-2 Size 2 Darda Splitter—Complete Unit D02 Hydraulic Power Unit Only, 3 Hp Air Motor, 50-80 CFM at 100 PSI, 5 gal. Reservoir ELECTRIC POWERED ROCK SPLITTING TOOL ASSEMBLY Powered by 1.5 Hp Electric Motor, Single Phase, 60 Cy, 3450 RPM, 110/220V (5 gal. pump) D03-12 Size 12 Darda Splitter—Complete Unit D03-9 Size 9 Darda Splitter—Complete Unit D03-2 Size 2 Darda Splitter—Complete Unit D03 Hydraulic Power Unit Only, 1.5 Hp Electric Motor Single Phase, 110/220 volts, 5 gal. Reservoir All Splitting Splitting Cylinder Assemblies Hydraulic Power Unit include: 1 Pr. High & Low Pressure 30’ hose with Quick-Connect couplings and covers
1/2 Pint Lubricant Operating Instruction Manual BLOCK MANIFOLDS Used to run multiple cylinders on one power pack. Units shipped dry Shipped complete D016-13 Flow Distribution Bar for 2 Cylinders—Includes 2 sets DARDA ROCK & CONCRETE SPLITTING of 10’ high and low pressure hoses, quick-connect cou- CYLINDERS—NO POWER PACK plings with covers and fittings Includes plug, feathers, whips, quick- connect couplings and covers D016-14 Flow Distribution Bar for 3 Cylinders—includes 3 sets of 10’ high and low pressure hoses, quick-connect cou- D00-12 Darda Splitting Cylinder—Size 12 plings with covers and fittings D00-9 Darda Splitting Cylinder—Size 9 D016-15 Flow Distribution Bar for 4 Cylinders—includes 4 sets of 10’ high and low pressure hoses, quick-connect cou- D00-2 Darda Splitting Cylinder—Size 2 plings with covers and fittings.
888-883-5144 CROWDERSUPPLY.COM 49 888-883-5144 50 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DARDA ROCK SPLITTERS Accessories PLUGS & FEATHERS LUBRICANTS
D010-2 Plug, Size 2 D00-HPT Plug & Feather Lubricant—1/2 pint can
D010-3 Plug, Size 3 D00-PT Plug & Feather Lubricant—1 pint can D014-3 Plug & Feather Lubricant—Case of 12-1/2 pint cans D010-7 Plug, Size 7 D014-4 Plug & Feather Lubricant—case of 12-1 pint cans D010-8 Plug, Size 8 DARDA-OIL Aero HFA Fluid—5 Gallons D010-9 Plug, Size 9 50’ E X TENSION HOSES D010-12 Plug, Size 12 1 set requires all items below
D011-2 Feather, Size2 D016-20 30’ High Pressure Hose (standard) - Couplings NOT included D011-3 Feather, Size 3 D016-21 30’ Low Pressure Hose (standard) - Couplings NOT D011-7 Feather, Size 7 included D016-50 50’ High Pressure Hose—Couplings NOT included D011-812 Feather, Size 8, 11 & 12 D016-51 50’ Low Pressure Hose—Couplings NOT included D011-9 Feather, Size 9 D016-26 Quick-Connect Coupler Set (includes male & female) D011-73 Enlarging Feather, Size 7 D016-27 Coupler Cover D011-8123 Enlarging Feather, Size 8 & 12 D437 ¼” Female x ⅜” Male Reducer D011-93 Enlarging Feather, Size 9 D438 Low Pressure Hose Connector DARDA CYLINDER SPECIFICATIONS Model #12 #9 #2 Weight (lbs) 68 50 45 Overall Length (in) 50¾ 40 30 Ma x imum E x pansion (in) 0.75-1.87 0.78 0.33 Hole Size Required (in) 1¾ 1¾ 1-3/16 Minimum Hole Depth (in) 26 18 12 Ma x imum Splitting Force (tons) 385 220 220 ELCO PUMP SPECIFICATIONS Model ELECTRIC 03 AIR 02 GASOLINE 01 Weight (lbs) 74 70 78 Height (in) 24 19¼ 21¼ Width (in) 18 18 18 Depth (in) 12½ 12½ 12½ Oil Capacity (gallons) 5 5 5 3450 RPM, 115 volts at 20 Air Motor requires 50-80 3.75 hp Briggs & Stratton gas Motor amps & 220 volts at 10 amps cfm at 100 PSI engine
50 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 51 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
AIR COMPRESSORS
KAESER AIR COMPRESSORS
Kaeser Compressors’ superior line of Mobilair portable air compressors are available from 50 cfm to 590 cfm. Engi- neered and manufactured in Germany, Kaeser Mobilair compressors are reliable, rugged and durable, with heavy- duty chassis and great protection from corrosion and the elements.
Mobilair compressor feature larger, slower turning airends for longer life and better efficiency, and produce 15-20% more air per gallon of fuel than our competition. We drive these airends with powerful, yet efficient engines from name brands you can trust: Honda, Kubota, Deutz, and Mercedes Benz.
And if that wasn’t enough, Mobilair compressors are easy to operate and handle great on the road. Reliability, fule efficiency, ease of operation and low noise are what set Mobilair apart as the best portable compressor available!
Kaeser’s Mobilair line of portable compressors are designed and built for rugged use and dependable performance. These portable compressors provide a reliable source of compressed air for construction sites and other industry applications such as demolition, sand blasting, sprinkler irrigation and monument engraving. A wide range of tow behind air compressor models and accessories are available to suit virtually any need.
Please visit our website—www.crowdersupply.com—or call our offices for further information and specifications. KAESER COMPRESSORS
FUEL TANK CFM ENGINE MAKE BHP CAPACITY WEIGHT DIMENSONS
M15 50 Honda GX 630 14.8 5 gal 450 42½ x 31½ x 31
M17 60 Honda GX 630 17.4 5 gal 450 42½ x 31½ x 31
M27SKID 92 Kubota D1105-B 21.2 10.6 gal Diesel 1267 73 x 38¼ x 45¼
M270E 92 Kubota D1105-B 21.2 10.6 gal Diesel 1267 121¾ x 49½ x 51
M50PE 185 Kubota V1505-t IDI 41 21 gal Diesel 1470 136½ x 56¾ x 56
M57 210 Kubota V2403 42.9 28 gal Diesel 2500 140 x 68 x 61
M57 Utility 210 Kubota V2403 51 28 gal Diesel 2340 84½ x 33¼ x 55½
M64 225 Kubtoa V2403T 59 28 gal Diesel 2512 144 x 68 x 56
M100 375 Kubota V3800 90 40 gal Diesel 3009 159 x 70 x 60
M122 400 Deutz TCD2012 L4 103.3 45 gal Diesel 3790 186 x 73 x 63
Mercedes Benz M250 900 288 66 gal Diesel 6622 225 x 77 x 90 OM926LA
Mercedes Benz M350 1200 327 172 gal Diesel 12,853 246 x 82¼ x 96 OM501LA
888-883-5144 CROWDERSUPPLY.COM 51 888-883-5144 52 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
AIR COMPRESSORS
VANAIR AIR COMPRESSORS
Powerful and Reliable Lifetime Warranty Rotary Screw Air Compressor with Power Take-off Technology Sullair® Air Ends—Exclusive to VanAir Products The innovative in-tank air/oil separator APPLICATION RECOMMENDATIONS TOOLS & APPLICATONS PRO VIPER DIESEL VIPER GAS VIPER GAS W/ GEN. Air Impact Wrench* Up to ¾” Up to 1½” Up to 1½” Up to 1½” Blow Out Sprinkler Systems X X X Chipping Hammer* X X X X Cut-Off Tool X X X X Drill* X X X X Fluid Transfer Pumps* X X X Grinder* X X X X Jack Hammer* 60-90 lb 60-90 lb 60-90 lb Mole Tool* X X X Monument Engraving X X X Tire Inflation * X X X X
* Ratings are approximate and are based on new equipment specifications. Refer to tool manufacturer recommendations for tool consumption needs
Pro Series & Contractor Reliant RC40, Tiger, Viper Portable Gas Viper Portable Diesel Reliant RS85, and ADHD Series Gas Powered Air Powered Air Compressor Powered Air Compressor Hydraulic Above-Deck Compressors Compressor Above Deck Hydraulic—30- Pro Gas—18-35 CFM Viper Gas—40-80 CFM Viper Diesel—48-80 CFM 185 CMF Ultra portable, yet powerful, When you need a high perfor- Powerful, yet portable, this Providing the highest CFM of the gas powered Pro-Series mance air compressor that rugged engine-driven air com- any above-deck unit on today’s is an e x cellent option for delivers proven performance pressor is powerful enough to market, these compact, hy- individuals working in the on or off your truck, you need a run most 90lb jack hammers, draulic powered units offer the mechanic, service, agriculture Vanair Viper Series Engine- while being small enough to fit versatility and sheer power to and contractor markets. Due Driven Air Compressor. This behind the cab of your truck. match the task at hand. to it’s e x tremely compact gas-powered, compact unit can It’s compact build, portability size, this unit is ideal for work easily be loaded and unloaded and powerful performance performed on the go or where from your pickup for ma x make if the perfect choice for portability is a must. imum versatility. delivering the air power you need, where you need it.
52 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 53 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PRO-18 SERIES GAS POWERED AIR COMPRESSORS
ENGINE FUEL TANK PART NO MAKE PSI CAPACITY WEIGHT DIMENSIONS
050758 Kohler Remote Air Tank 150 1.75 gal Gas 215-400 34L x 17W x 20H
050759 Honda Remote Air Tank 150 1.75 gal Gas 215-400 34L x 17W x 20H
050761 Kohler Twin Air Tank 150 1.75 gal Gas 215-400 50L x 18W x 28H
050763 Honda Twin Air Tank 150 1.75 gal Gas 215-400 50L x 18W x 28H
050764 Kohler 30 gal Air Tank 150 1.75 gal Gas 215-400 41L x 19W x 37H
050765 Honda 30 gal Air Tank 150 1.75 gal Gas 215-400 41L x 19W x 37H PRO-35 SERIES GAS POWERED AIR COMPRESSORS
050780 Kohler Remote Air Tank 175 1.75 gal Gas 387-475 42L x 18W x 23H
050781 Honda Remote Air Tank 175 1.75 gal Gas 387-475 42L x 18W x 23H
050782 Kohler 30 gal Air Tank 175 1.75 gal Gas 387-475 44L x 19W x 38H
050783 Honda 30 gal Air Tank 175 1.75 gal Gas 387-475 44L x 19W x 38H VIPER PORTABLE GAS POWERED AIR COMPRESSOR
50267-001 Kohler 40CFM Capacity 100 5 gal Gas 685 42L x 33W x 34.5H
50136-001 Kohler 50CFM Capacity 100 5 gal Gas 685 42L x 33W x 34.5H
50216-001 Kohler 70CFM Capacity 100 5 gal Gas 685 42L x 33W x 34.5H
VIPER PORTABLE DIESEL POWERED AIR COMPRESSOR
050846 Kubota 80CFM Capacity 100 9 gal Diesel 800 48L x 21W x 33H ABOVE-DECK HYDRAULIC POWERED
50155 Viper 45-85CFM Capacity 100 370 42.2L x 20W x 21H
50324-001 Viking 40-65CFM Capacity 100 380 37.3L x 20.5W x 27H
50239-001 Tiger 30-45CFM Capacity 100 350 35.75L x 17.5W x 19.25H
41.5L x 39W x 30H—Side mounted receiver & fittings
50213-002 ADHD 125-185CFM Capacity 100 620 41.5L x 30.5W x 45.5H— Vertically stacked receiver with fittings
Visit our website—www.crowdersupply.com or call our offices for further specifications and details
888-883-5144 CROWDERSUPPLY.COM 53 888-883-5144 54 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
POWER PACKS Hydraulic
Why tow a large compressor to the site if you don’t need to? You can use hydraulic power packs virtually anywhere: fitted with wheels and handles, they are easy to maneuver around building sites. They are easy to start, the noise level is low, and when they are not in use, the power packs are small enough to be shored on shelves. They are also light weight enough that two people can lift one up and fit it in the back of a van.
Use with any hydraulic tool.
*** FREE ground shipping within Continental United States
Min Max Working Working Min Oil Max Oil Weight Pressure Pressure Flow Flow Hose Manufacturer Description Part No (lbs) (psi) (psi) (gpm) (gpm) Included Motor
Rhino HPP 13 801213 178 2200 2200 5 8 NO Honda GX 390-13Hp
HPP 18V 801214 232 2300 2300 5 10 NO B&S Vanguard—18Hp
Chicago PAC P9 1807008033 159 1810 1810 5 5 NO Honda Gas—9Hp Pneumatic PAC P13 1807011029 201 1810 1810 5 8 NO Honda Gas—13Hp
PAC P18 1807016028 260 1810 1810 5 11 NO B&S Vanguard Gas—18Hp
PAC P18Twin 1807016045 271 1810 1810 2 2 NO B&S Vanguard Gas—18Hp
Atlas Copco LP 18-2/20/1x40 PE 1807016032 245 2103 2103 2 2 NO B&S Vanguard Gas—18Hp
LP 13-30 P 1807011023 201 2175 2175 5 8 YES Honda Gas—13Hp
LP 13-20 DEL 1807011020 256 2175 2175 5 5 NO Lombardini Diesel—10Hp
LP 18-30 PE 1807016041 260 2466 2466 5 8 NO B&S Vanguard Gas—18Hp
LP 18-40 PE 1807016040 260 3103 3103 5 10 NO B&S Vanguard Gas—18Hp
LP 9-20P 1807008045 159 2175 2175 5 5 YES Honda Gas—9Hp
ACCESSORIES Hydraulic
Chicago Pneumatic & Rhino Atlas Copco Description Part No Part No
Oil Flow Divider 801005
Oil Flow Divider—16 gpm 1801163229
Oil Flow Divider—32 gpm 1801164232
20” Hydraulic Extension Hose 801226 3371801087
33’ Hydraulic Extension Hose 801227 3371801089
Hydraulic Bio Oil—4 L 3371807751
54 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 55 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
PUMPS Hydraulic
Light weight and compact submersible discharge pumps are used in a wide range of ap- plications. These include continuous pumping of clean or contaminated water on building sites, in flooded excavations and cellars. HWP2, LWP2 and WAP 2 pump handles small stones and debris up to ⅝” and is an ideal all-round pump for municipalities, water and waste utilities and rescue services. The HPW 3, LTP3 and WAP3 submersible trash pump can also handle muds and slurries containing stones and particles of up to 2⅜” in diame- ter. The HPW 4 submersible pump can handle stones and particles up to 3” in diameter.
*** FREE ground shipping within Continental United States
Min–Max Working Min-Max Pump Solid Min-Max Pump Weight Press Oil Flow Head Max Handling Performance Manufacturer Description Part No (lbs) (psi) (gpm) (ft) (in) (gal/min)
Rhino HWP 2 801510 16.9 1300-2000 5-8 92 1½ 202-202
HWP 3 801511 24.2 1750-2000 5-8 72 2½ 202-202
HWP 4 801512 58.8 1750-2175 5-8 46 3 902-902
Chicago WAP2 1806101441 24 1450-1450 5-6 82 0.4 222 Pneumatic WAP3 1806101442 29 2030-2030 7-10 105 2.4 507
Atlas Copco LWP 2 1806101434 24 2320-2320 5-6 82 ⅜ 3.7
LTP 3 1806101435 29 2495-2495 7-10 104 2½ 8.5 PUMPS Pneumatic
Centrifugal (DIP) pumps are specially designed for low-viscosity liquids such as water, cooling fluids, solvents, light oil or petrol. A specially designed rotating mechanical seal prevents leak- age. Submersible with a non-return valve (optional) mounted, or alternatively a hose connected so that the air oulet is above the surface. Compact design and a high-output air motor give the pumps a very high capacity in relation to petrol and electric motors of the same weight. ** NOT intended for pumping flammable fluids and must not be used for doing so.
Diaphragm (DOP) pumps are designed for the most polluted and viscous media, as well as high- ly abrasive and inflammable fluids.
Min-Max Air Overall Min Pump Weight Consum Dimensions Water Depth Performance Manufacturer Description Part No (lbs) (cfm) (in) Outlet (in) (gal/min)
Chicago CP 0010 T022224 33 100 8.25 x 9 2 ⅞ 125-250 Pneumatic CP 0020 T022185 58 110 9 x 11.75 2½ ⅞ 155-340
CP 0077 T024005 125 85 2½ 36-90
Atlas Copco DIP 25 8492010321 51 148 G2 ½ 28
DIP 35 8492010339 51 148 G2 ½ 22
DIP 65 8492010620 51 148 G2 ½ 11
DOP 15F 8492010163 68 72 G2 ½ 7
DOP 15N 8492010149 68 72 G2 ½ 7
Visit our website for addi- tional information on each model, Parts Breakdowns, Safety & Operating Instruc- tions and accessories
888-883-5144 CROWDERSUPPLY.COM 55 888-883-5144 56 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
CORE DRILLS Hydraulic These powerful drills are ideal for jobs where there is no space for drill stands. Due to the non -kick back operation, you can still drill holes of up to 8” in diameter free hand. Fully hydraulic, the tools can be used for wet diamond core drilling on the toughest jobs. These core drills offer spark free operation—there are no electrical components—for safe operation inside build- ings, in hazardous environments and even underwater. Safe hand held drilling in reinforced concrete and asphalt up to 200mm diameter in con- fined spaces, for ventilation, heating, cable, drainage, sewer, water or gas piping and other installations where large deep holes are needed. Works efficiently also in underwater applications.
*** Free ground shipping within Continental United States
Min-Max Working Min-Max Rotation Min-Max Weight Length Pressure Oil Flow Speed Drill Dia. Manufacturer Description Part No (lbs) (in) (psi) (gpm) (rpm) (in)
Chicago COR 5 1806101454 21 16.3 870-1740 5-8 600-900 Pneumatic COR 15 1806101455 20 16 870-1740 5-8 1500-2250
Atlas Copco LCD 500 1806101438 21 16 1160-2500 5 600-900 3-8
LCD 1500 1806101439 20 16 1160-2500 5 1500-2250 1-3 CORE DRILLS Pneumatic It is a powerful, hand-held rotary drill with a threaded output shaft onto which a water swivel and core bit an be fitted.
Originally designed for hand cutting boles in reinforced concrete junction boxes for the installation of fiber optic cables, it is now being used in many other sectors of the construction industry where holes require cutting in concrete, brickwork, stone, etc., where the access or position restricts the use of rig-mounted units. It is ideal for use in hazardous environments where the use of electrical tools are forbidden
Rotation Weight Length Air Consum Speed Manufacturer Description Part No (lbs) (in) (cfm) (rpm)
Chicago CP 0315 T024733 14 13 44 750 Pneumatic CUT OFF SAWS Hydraulic These powerful, light and compact saws can be used to cut through concrete, asphalt, and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a light weight cart you can use the saws for floor, road and other light surface jobs.
*** FREE ground shipping within Continental United Stated
Min-Max Rotation Disk Cutting Weight Oil Flow Speed Size Arbor Size Depth Manufacturer Description Part No (lbs) (gpm) (rpm) (in) (in) (in)
Rhino HCS 14 801310 16 5-8 2400-3600 14 1 5⅜
HSC 16 801311 16 5-8 1800-3600 16 1 6⅜
HSC 18 801312 18 5-8 1800-3600 18 1 7⅜
Chicago SAW 14 1809014003 26.35 5-8 2500-4000 14 1 5¼ Pneumatic SAW 16 1809016613 26.5 5-8 2500-4000 16 1 5¼
Atlas Copco LS-14 1809014001 26.5 5-8 2500-4000 14 1 5¼
LS-16 1809016000 28.7 5-10 2000-4000 16 1 6¼
56 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 57 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SCABBLERS—NEEDLE/CHISEL SCALER—LONG REACH SCALER Pneumatic
Scabblers are ideal tools for cleaning and roughening concrete and construction joints. They can also be used to produce ornamental or contrasting finishes on road and building structures. With their different designs the CP 0006 and Texas Pneumatic Triple Piston is more suitable when work- ing on large surface areas whereas the CP 0066 and Texas Pneumatic Single Piston Scabbler is mainly used for hard-to-reach areas.
Air Con- Air Impact Weight Length sum Inlet Rate Manufacturer Description Part No (lbs) (in) (cfm) (in) (bpm) Pistons
Chicago CP 0006 T022137 11 18.5 28 ½” NPTF 3000 3-4 Point Carbide Tipped Pneumatic CP 0066 T024412 10 11 24 ½” BSP 3000 3-4 Point Carbide Tipped
CP 0006 SVR 89000004001 14.3 20 28 ½” NPTF 3000 3-4 Point Carbide Tipped
Texas Single Piston TP-S1 5 9 9 ⅜” NPTF 4000 Single Standard Pneumatic Single Piston TP-S1-AC 5 9 9 ⅜” NPTF 4000 Single Air Cock Valve
Single Piston TP-S1-BH 5 9 9 ⅜” NPTF 4000 Single Bent Handle
Single Piston TP-S1-BH-AC 5 9 9 ⅜” NPTF 4000 Single Bent Handle & Air Cock Valve
Triple Piston TP-T3 9 11 15 ⅜” NPTF 5200 Triple Standard
Triple Piston TP-T3-AC 9 11 15 ⅜” NPTF 5200 Triple Air Cock Valve
Triple Piston TP-T3-BH 9 11 15 ⅜” NPTF 5200 Triple Bent Handle
Triple Piston TP-T3-BH-AC 9 11 15 ⅜” NPTF 5200 Triple Bent Handle & Air Cock Valve
The needle scaler cleans irregular surfaces easily. These versatile scalers remove rust, paint and other coatings from metal; peens welded joints and removes slag; cleans castings; chips stone, con- crete and brick.
Air Air Impact Weight Length Consum Inlet Rate Stroke Manufacturer Description Part No (lbs) (in) (cfm) (in) (bpm) (in)
APT 307 18695 6.7 16.75 13 ¼” NPTF 4000 7” needles
317 18694 6.7 16.75 13 ¼” NPTF 4000 7” needles
Texas Chisel—Lever TX1BLTCS 5 15 12 ¼” NPTF 4600 1⅛ Pneumatic Chisel—Push TX1BPTCS 5 15 12 ¼” NPTF 4600 1⅛
Needle—Lever TX1BLTNS 7 17 12 ⅜” NPTF 4600 1⅛
Needle—Push TX1BPTNS 7 17 12 ¼” NPTF 4600 1⅛
Needle—Lever TX1BLTNS-2MM 7 17 12 ¼” NPTF 4600 1⅛
Needle—Lever TX1BLTNS-4MM 7 17 12 ¼” NPTF 4600 1⅛
Needle—Lever TX1BLTNSW7 7 19 12 ⅜” NPFT 4600 1⅛
Tamco Weld/Flux Needle A1L2 4.2 10 12 ¼” NPTF 4600 1⅛
Weld/Flux Needle JCOA1L1 6.25 17 12 ¼” NPTF 4600 1⅛
Continental Needle Scaler CNS6 6 17 5 ¼” NPFT 4500 1
Air Air Impact Weight Length Consum Inlet Rate Stroke Manufacturer Description Part No (lbs) (in) (cfm) (in) (bpm) (in)
Atlas Copco TEX 117 9245998732 17 70 7 2300
Texas Long Reach Scaler TX2LRCS 14 48-60 12 ½” NPTF 3400 2 Pneumatic
Continental Long Reach CLS12A-H 17 53 12 ½” NPTF 3850 1½
Long Reach CLS12A-R 17 53 12 ½” NPTF 3850 1½
888-883-5144 CROWDERSUPPLY.COM 57 888-883-5144 58 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
BACKFILL TAMPER Pneumatic Backfill Tampers are used for soil compaction, temporary filling of holes, asphalt packing, etc. Applications range from founda- tion and pavement repair to the installation of power or telephone poles.
*** FREE ground shipping within Continental United States
Air Air Impact Manufac- Weight Length Consum Inlet Rate Stroke turer Description Part No (lbs) (in) (cfm) (in) (bpm) (in)
Chicago CP 0003 T019307 30 52 18 ½” NPTF 800 6 Pneumatic CP 0035 9246020505 38.5 48.25 38.5 ½” NPTF 1450 5½
CP 0004 T022292 42 50 28 ½” NPTF 780 6
Atlas Copco TEX 640 w/ 6” Iron Butt 9245997600 40 48.25 38.5 800
TEX 640 w/ Pole Butt 9245997601 40 48.25 38.50 800
APT 131 5214 37 52 42 ½” NPTF 670 5½
Texas Backfill Tamper TX6TN 40 48.25 38.5 ½” NPTF 800 5½ Pneumatic
Sullair MBT-6 w/ 6” Steel Butt 02250053-832 40.50 48.75 32 ⅜” MPTF 500 5½
MBT-6 w/ 6” Pole Butt 02250053-833 40.5 48.75 32 ⅜” MPTF 500 5½
MBT-6 w/ 6” Iron Butt 02250053-834 40.5 48.75 32 ⅜” MPTF 500 5½
MBT-6 w/ 4” Alum Butt 02250053-835 40.5 48.75 32 ⅜” MPTF 500 5½
MBT-6 w/ 3” Alum Butt 02250053-836 40.5 48.75 32 ⅜” MPTF 500 5½
Tamco JET06 JET06 39.6 49 35.2 ½” NPFT 750 5½
Continental CBT-6 CBT6 40
CBT-6P CBT6P 40
SAND RAMMERS Pneumatic
We offer a variety of rammers for the job site, foundry, or mill. All tools feature heat treated alloy steel cylinders, innovative features and rugged construction. It is the ideal tool for any of your compaction needs.
Air Air Impact Butt Manufac- Weight Length Consum Inlet Rate Stroke Size turer Description Part No (lbs) (in) (cfm) (in) (bpm) (in) (in)
Texas Sand Rammer TX00 4 12 12 1600 2 1⅝” Rubber Pneumatic Sand Rammer TX70B 6.5 16 15 ¼” NPTF 1500 2 1⅜” Alum
Sand Rammer TX70B-NR 6.5 16 15 ¼” NPTF 1500 2
Sand Rammer TX70B-NRLR 6.5 16 15 ¼” NPTF 1500 2
Bench Rammer TX8-2.5 7 16.5 13 ⅜” MPTF 1725 2½ 2⅜” Alum Rubber
Bench Rammer TX8-4 10 21.5 19 ⅜” MPTF 1240 4 3” Alum Rubber
Tamco Rammer 0BR 6.65 16.5 ¼” NPTF 2500 2 2½
Rammer 00BA 3.75 11.75 ⅜” MPTF 1600 2 1¾
Rammer 2BAR 7.13 15.25 ⅜” MPTF 1725 2½ 2½
Rammer 1BA 10 20.25 ⅜” MPTF 1240 4 2½
58 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 59 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
AIR MOVEMENT
JET FAN This four-bladed vane axial fan is called a jet fan because a high-velocity jet of compressed air is ejected from the trailing edge of the blade. This results in the forward rotation of the fan wheel just like a jet plane is pushed forward by the high -velocity jet ejected form the rear of the jet engine. Use for general ventilation in any location where compressed air is available. Use as a blower or exhauster Suited for ventilation of tanks, process vessels, or other confined areas for the removal of hazardous fumes or contaminated air from welding, sand blasting and other operations.
Compressed Compressed Flange Air Air Dia Weight Max Pressure Consum Air Flow Average Manufacturer Description Part No (in) (lbs) Inlet PSI (psi) (cfm) (Free Flow) RPM
Texas 12” Jet Fan TXJF12 12 41 ¾” FPT 120 40-120 55-141 1684-3120 3190-6305 Pneumatic 16” Jet Fan TXJF16 16 63 ¾” FPT 120 40-120 54-139 2541-4774 2173-4311
20” Jet Fan TXJF20 20 95 ¾” NPT 110 40-100 60-292 2080-3670
24” Jet Fan TXJF24 24 132 1” NPT 110 40-100 76-338 1565-3138
AIR MOVERS Air movers, or air horns, are used wherever there is a need to disperse fumes, move air into confined spaces, cool men working in elevated temperature conditions, or cool machinery or products with a blast of directed air. Common applications are found in refineries, chemical plants, utilities and cogeneration units, metal fabrication plants, paper and pulp plants, shipyards, the marine industry and steel industry.
Air movers have been tested at an independent laboratory. The listed free flow rat- ings are based on tests to AMCA standard 210. Under identical situations, the air movers exceeded all the air flow ratings of competitively manufactured air movers.
The new polymer horns offer reduced weight, longer life and they are crush and dent resistant. The polymer is electrically conductive to safely discharge any static buildup.
Dia. At Inside Outside Top Bolt Base Dia of Overall Dia of of Air Circle Slot Base Length Base Horn Inlet Dia Dia. Weight Manufacturer Description Part No (in) (in) (in) (in) (in) (in) (in) (lbs)
Metal Horn 3” Air Mover TX3AM 3 30.5 7.31 7.0 1/2 6.56 0.4 8.5
6” Air Mover TX6AM 6 44.25 11.25 12.5 1 10.5 0.4 22.3
8” Air Mover TX8AM 8 46.06 14.37 14.25 1 13.62 0.5 36
10” Air Mover TX10AM 10 48 17 15.75 1 15.5 1 42.1
Polymer Horn 3” Air Mover TX3AMP 3 30.5 7.31 7 1/2 6.56 0.4 8.5
6” Air Mover TX6AMP 6 44.25 11.25 12.5 1 10.5 0.4 22.3
8” Air Mover TX8AMP 8 46.06 14.37 14.25 1 13.62 0.5 36
10” Air Mover TX10AMP 10 48 17 15.75 1 15.5 1 42.1
Stainless Steel Horn 3” Air Mover TX3AMSH 3 30.5 7.31 6 1/2 6.56 0.4 8.5
6” Air Mover TX6AMSH 6 44.25 11.25 12.5 1 10.5 0.4 22.3
Short Horn 3” Air Mover TX3AMS 3 16.75 7.31 7 1/2 6.56 0.4 5.5
Short Polymer Horn 3” Air Mover TX3AMSP 3 16.75 7.31 7 1/2 6.56 04 5.5
Short Stainless Steel Horn 3” Air Mover TX3AMSSH 3 16.75 7.31 7 1/2 6.56 0.4 5.5
All Stainless Steel 6” Air Mover TX6AMSS 6 44.25 11.25 12.5 1 10.5 0.4 22.3
888-883-5144 CROWDERSUPPLY.COM 59 888-883-5144 60 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
AIR MOVEMENT
AIR MANIFOLDS Air manifolds can be used in any industry where there is a need to have multiple outlets of air to supply various pneumatic tools simultaneously. The manifold comes with 1½” air inlet and can be dispersed through up to six (6) separate ¾” Chicago couplings. Each outlet is regulated by a bronze safety lock on/ off self-relieving ball valve. For an adequate air supply to each tool use the formula:
Air Tool Consumption x Number of Tools = CFM Required
Air Manufac- Weight Height Diameter Inlet Number of turer Description Part No (lbs) (in) (in) (in) Outlets
Texas Air Manifold TX1AMF 102 15 36 1½ 6 Pneumatic Air Manifold with 1½” Water Filter & 50oz Collection Bowl TX1AMF-WF550 102 15 36 1½ 6
Air Manifold with 1½” Water Filter & 100oz Collection Bowl TX1AMF-WF910 102 15 36 1½ 6
ASME CERTIFIED AIR MANIFOLDS
The TX3AMF is a smaller version of this series and is much more accommodating to carry into con- fined spaces such as airliners for cabin and seat repair. It fits neatly into large toolboxes for stor- age. It can be equipped with universal (crowsfoot type) couplers or ¼”, ⅜” or ½” quick disconnect industrial couplers with hose barb plug included.
The larger air receivers/air manifolds provide a dual purpose for your air handling systems. They help maintain a constant stable pressure and store a greater volume of air. They also provide a greater range of outlet sizes to match the required application. Both have two 2” ball valves for use in high volume requirements such as sand blasting. For other requirements, they are equipped with four 1” ball valves and two ¾” ball valves.
Tank Inlet Work Manufac- Weight Height Length Dia. Width Size No. of Pressure Capacity turer Description Part No (lbs) (in) (in) (in) (in) (in) Outlets (psi) (gal)
Texas 15 Gal Air Manifold TX2AMF 63 18 39 12 22 2 8-¾” 200 15 Pneumatic 2.5 Gal Air Manifold TX3AMF 21 12 20 8 14 1 4 200 2.5
¼” Quick Release Air Manifold TX3AMF-QC250 21 12 20 8 14 1 4 200 2.5
⅜” Quick Release Air Manifold TX3AMF-QC375 21 12 20 8 14 1 4 200 2.5
30 Gal Air Manifold TX4AMF 115 27 46 16 36 2 8 200 30
60 Gal Air Manifold TX5AMF 193 32 60 20 39 2 8 200 60
10 Gal Air Manifold—CA Permit Exempt TX6AMF 51 16 36 10 20 2 8 150 10 AIR RECEIVER TANKS
Helps maintain a constant, stable pressure for your air system and stores a large volume of air. Provides an area to accumulate and drain moisture. Eliminates pulsation of air set up in compression process. For use with shop air supply. Helps prevent pressure drops in auto painting air supply. Helps maintain pressure in sand blasting. Horizontal and vertical air receiver tanks—200 psi working pressure. All tanks primer coated.
Inlet Manufac- Size Capacity Inlet Size Capacity turer Description Part No (in) (gal) Description Part No (in) (gal)
Texas ASME Vertical Air Receiver 60ARV200 2” NPT 60 ASME Horizontal Air Receiver 80ARH200 80 Pneumatic ASME Vertical Air Receiver 60ARV200 2” NPT 80 ASME Horizontal Air Receiver 120ARH200 120
ASME Vertical Air Receiver 120ARV200 2” NPT 125 ASME Horizontal Air Receiver 20ARH200 200
ASME Vertical Air Receiver 200ARV200 2” NPT 200 ASME Horizontal Air Receiver 240ARH200 240
ASME Vertical Air Receiver 240ARV200 2” NPT 240 ASME Horizontal Air Receiver 1040ARH150 1040
ASME Vertical Air Receiver 400ARV200 2” NPT 400
60 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 61 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
RIG-MOUNTED BREAKERS
Chicago Pneumatic makes a wide range of rugged, durable rig mounted breakers with the power to work any job you give them. From the light-duty breakers offering high performance in a lighter package to the large heavy-duty breakers for the largest demolition jobs, our breaker get the job done.
Choose the type of breaker that’s the right fit for your job. Every light-, medium-, and heavy-duty RX Breaker shares these features for high performance, excellent efficiency and outstanding value: Hybrid Technology—The combined gas/oil working principle behind all RX breakers ensures the optimum transmission of energy from the piston to the working tool to deliver the best possible efficiency and high-impact energy. Power Booster—Rather than waste recoil energy, Chicago Pneumatic technology in RX Breakers converts it to reusable energy that enhances percussive performance to deliver more power from the same hydraulic input. Breaker Box Guiding System—Minimizes recoil forces for less strain on the carrier, operator and breaker. All RX Breakers deliver sound power levels amongst the lowest in the market. Internal Control Valve—Protects sensitive parts to ensure maximum efficiency and reliability.
Of course, those features are just the beginning. You’ll find plenty more working benefits on every model, helping you get exactly what you need for your application. Then simply attach the RX Breaker to the carrier of your choice and know you have what it takes to get the job done smartly, efficiently and reliably.
*** PRICE INCLUDES MOUNTING BRACKET, MOIL POINT OR CHISEL AND HOSES
LIGHT DUTY RX BREAKERS MEDIUM-DUTY RX BREAKERS HEAVY-DUTY RX BREAKERS Applications: Used for light Options Applications demolition, landscaping, building Dust wiper Medium and heavy industrial renovation and road construction. CP-lube for optimum grease demolition distribution Building renovation Features and Benefits Road construction Hybrid technology for higher Applications: Used for demolition, Rock excavation and mining energy building renovation, road construction, Internal control valve for high rock excavation and quarrying Features and Benefits efficiency Hybrid technology for higher Features and Benefits Power booster for higher impact energy performance and lower Hybrid technology for higher Internal control valve for vibration energy higher efficiency Breaker box guiding system for Internal control valve for high Power booster for higher lower noise and vibration efficiency performance and lower Central lubrication port and field Power booster for higher vibration replaceable bushing for easier performance and lower vibration Central lubrication port for maintenance Breaker box guiding system for easier maintenance Innovative design with less lower noise and vibration Dual retainer bars for higher components for higher reliability Central lubrication port and field reliability Easy power for easy handling replaceable bushing for easier Dust wiper and ventilation port maintenance Field replaceable wear bushing for better dust protection Innovative design with less Rock claws for better wear components for higher reliability protection Dust wiper and ventilation port for Power Control Plus for better dust protection optimized performance and Power stop for better idle blow protection protection.
888-883-5144 CROWDERSUPPLY.COM 61 888-883-5144 62 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MINING SUPPLIES Air Accessories ROCK DRILL OIL THREAD LUBE
RD-N SYNTHETIC
JET LUBE—J75 JET LUBE—89 KOPR-KOTE ECO-SAFE ROCK DRILL OIL FOR 1 Gal J751G J891G JKOPR1G ECO1G ENVIRONMENTAL ROCK DRILL OIL DRILLLING 2 Gal J7525 J892G JKOPR2G ECO2G 1 Gal RDO1G RDN1G 2 Gal RDO2G RDN2G
5 Bal J755G J895G JIOPR5G ECO5G 5 Bal RDO5G RDN5G MSDS Safety Sheets are available on our website in PDF form or call our MSDS Safety Sheets are available on our offices website in PDF form or call our offices AIR KING UNIVERSAL COUPLINGS ¼” ⅜” ½” ¾” 1” Hose Ends AMH AM1 AM6 AM11
Male NPT Ends AMB1 AMB AM2 AM7 AM12 Female NPT End AMC1 AMC AM3 AM8 AM13 Triple Connect AM10 Male AM8SWIV Female AM7SWIV Washers— Bag of 50 AMWR4 Individual AWR Safety Clips—Bag of 25 AC1
GROUND JOINT AIR HAMMER COUPLING STYLE HOSE ID & NPT COURSE NUT COMPLETE STEM-PLATED STEEL WING NUT SIZE THREAD FEMALE
½” DI X -GDF6 DI X -GBA45 1-31/64” OD X COMPACT DI X -J47 8 TPI ¾” DI X -GDF8 DI X -GBA46
¾” DI X -GDF10 DI X -GBB18 1-47/64” OD X HEAVY DUTY DI X -DBL12 8 TPI 1” DI X -GDF12 DI X -GBB11
DOUBLE FEMALE SPUD MALE SPUD SPUD
½” DI X -GJ65 DI X -GJ60 1-31/46” OD X COMPACT DI X GJ-75 8 TPI ¾” DI X -GJ55 DI X -GJ50
¾” DI X -GDL8 DI X -GDL7 1-47/64” OD X HEAVY DUTY DI X -GDL25 8 TPI 1” DI X -GDL13 DI X -GLD10
62 888-883-5144 CROWDERSUPPLY.COM 888-883-5144 63 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MINING SUPPLIES Air Accessories
ALL STEEL—JOY FOOTBALL STYLE— ALUMINUM—PRESSURE FEED LINE OILER CONSTANT FEED
LO-5PF 1/6 PINT ½” NPT LO-JOY-FB 1 Pint 1¼” NPT
LO-10PF 1/3 PINT ¾” NPT
LO-15PF 1/2 PINT ¾” NPT
LO-30PF 1 PINT 1” NPT LINE OILERS—CONSTANT FEED
LO-60-CF 1 Quart 1¼” or 1½” NPT LO-690-CF 3 Gallon 2½” or 3” NPT
LO-120-CF 2 Quart 1¼” or 1½” NPT LO-690-6-CF 6 Gallon 2½” or 3” NPT
LO-180-CF 3 Quart 1¼” or 1½” NPT LO-690-9-CF 9 Gallon 2½” or 3” NPT
LO-230-CF 1 Gallon 2” or 2½” NPT LO-690-12-CF 12 Gallon 2½” or 3” NPT
LO-290-CF 1.5 Gallon 2” or 2½” NPT WHIP CHECK WCSML Whip Check—½” x 1¼” Hose WCLRG Whip Check—1½” x 3” Hose WHIP HOSE ASSEMBIES (6’ HOSE) WITH LUBRICATORS CHICAGO HOSE ID COUPLING LUBRICATOR (IN) CONNECTOR T X 1HW Crowsfoot 1.4oz—T X 0L ½” ¼” NPT T X 2HW Crowsfoot 1.4oz—T X 0L ½” ⅜” NPT T X 2HWS Crowsfoot 1.4oz—T X 0L ½” ⅜” NPT—Straight Swivel T X 3HW Crowsfoot 1.4oz—T X 0L ½” ½” NPT T X 4HW Crowsfoot 1.4oz—T X 0L ½” ⅞”-24 Thread T X 4HW1/2 Crowsfoot 1.4oz—T X 0L ½” ½” Swivel T X 5HW Crowsfoot 3.7oz—T X 1L ½” ⅜” MPT T X 6HW Crowsfoot 3.7oz—T X 1L ½” ½” MPT T X 7HW Crowsfoot 3.7oz—T X 1L ½” ¾” MPT T X 8HW Crowsfoot 3.7oz—T X 1L ½” ⅞”-24 Thread T X 8HW1/2 Crowsfoot 3.7oz—T X 1L ½” ½” Swivel T X 9HW Crowsfoot 3.7oz—T X 1L ½” Crowsfoot T X 10HW Crowsfoot 11oz—T X 2L ½” Crowsfoot T X 11HW Crowsfoot 11oz—T X 2L ½” ½” MPT T X 12HW Crowsfoot 11oz—T X 2L ½” ¾” MPT T X 12HW1/2 Crowsfoot 11oz—T X 2L ¾” ½” MPT T X 13HW Crowsfoot 11oz—T X 2L ¾” 1” MPT T X 14HW Crowsfoot 11oz—T X 2L ½” ⅞”-24 Thread T X 15HW Crowsfoot 11oz—T X 2L ¾” Crowsfoot
888-883-5144 CROWDERSUPPLY.COM 63 888-883-5144 64 MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MINING SUPPLIES Air Accessories HOSE WHIP ASSEMBLIES (6’ HOSE) WITHOUT LUBRICATORS CHICAGO HOSE ID COUPLING (IN) CONNECTOR 9246020363 Crowsfoot ½” ⅜” NPT—Bent Swivel 9246020364 Crowsfoot ½” ½” NPT—Bent Swivel 9246020362 Crowsfoot ½” ⅞” - 24 Thread—Bent Swivel HWA6-CF/1087 Crowsfoot—Chipping Hammer ½” ⅞” - 24 Thread HWA6-408/407 Crowsfoot—Rivet Buster ½” ½” MPT & ⅜” MPT HWA6-CF/988 Crowsfoot ½” ½” Swivel HWA6-CF/407S Crowsfoot ½” ⅜” MPT Straight Swivel
AIR HOSE AIR-H-19-50 Contractors Air Hose—¾” x 50’ with fittings AIR-H-25-50 Contractors Air Hose—1” x 50’ with fittings AIR-H-25-WB Contractors Air Hose—1” Wire Braid AIR-H-32-WB Contractors Air Hose—1¼” Wire Braid AIR-H-50-WB Contractors Air Hose—2” Wire Braid AIR-H-19C Custom Made Hose—Less than 25’ with fittings
SWIVELS 9246020370 ⅞” - 24 Thread x ½” Hose Barb 9246020372 ½” NPT x ½”” Hose Barb 9246020371 ⅜” NPT x ½”” Hose Barb
BETONAMIT NON-EXPLOSIVE CRACKING AGENT BETONAMIT, a highly expansive cracking again, is supplied in powdered form, sealed in handy 5kg plastic packs. It must be mixed with a specific quantity of clean cold water and poured into holes pre-drilled in the material to be cracked. After a few hours reaction time BETONMIT ex- erts a huge expansive pressure, which quickly increases to such a degree that any hard rock standard or reinforced concrete can be broken. BETONAMIT can be used both indoors and outdoors, in dry or humid conditions, even underwater. This information is provided as a service and should not be relied upon. Always make sure you read and follow all instructions provided with product. The users manual can be downloaded from our website in PDF form.
64 888-883-5144 CROWDERSUPPLY.COM