ELP™ 340 Thermal Transfer

Stand Alone Identco’s ELP™ 340 thermal transfer printer allows users to load, Highlights print, and change materials faster and more efficiently. The ability to Touch screen - LCD display operate with a computer or network or in a stand alone mode offers flexible printer operation. Light weight design Prints 300 dpi at 125 mm/s Stand Alone Printing: Fits 8 inch OD media rolls The stand alone mode allows users to print without the use of a computer. formats are first created on labeling software, such as 1 inch OD ribbon core Nice Label. A USB flash drive tranfers the data into the printer through Center aligned media guides, the USB port. After saving the formats using the easy to follow menus, perfect for continuous heat shrink the ELP is ready to print without a PC. Stand alone mode promotes Readily accepts ribbons cost savings by ease of use, freeing up valuable floor space and allowing diverse printer placement. Coated-side in / side out

Features

Optional cutter (shown*) Multiple connections (USB 2.0, Ethernet, 3 x USB host, optional wireless) Service plans available

*

www.identco.com ELP™ 340 Thermal Transfer Printer

n Standard r Option LABEL PRINTER ELP 340

Print method Thermal transfer / Thermal direct Print resolution dpi 300 Print head Print width up to mm 105.7 (4.0”) Print speed mm/s 30, 40, 50, 75, 100, 125 , cardboard, textile, such as PET, PE, PP, PVC, PU, Polyolefin Labels – continuous material on rolls ¢ n heat shrink mm/in 2.4 - 38.1 (0.94” - 1.5”) Thickness mm / Weight g/m2 0.055 – 0.7 / 60 – 240 Labels mm single lane: 10 –116, multi lane: 5 –116 Liner mm 25 –120 Material1) Width continuous material mm 5 –120 flat pressed tubes mm 5 - 1000 Label height without back-feed mm 5 - 1000 Media roll Outside diameter up to mm/in 203 (8.0”) Core diameter mm/in 38–76 (1 . 5” - 3.0”) Winding Outside or inside, when cutting preferably outside Ink Outside or inside Roll diameter up to mm/in 72 (2.8”) Ribbon Core diameter mm/in 25.4 (1.0”) Ribbon length up to m/ft 360 (1,182’) Width mm/in 50–114 (1. 96” - 4.33”) Dimensions Height x Depth x Width mm 245 x 412 x 264 printer Weight kg 5 Gap sensor For leading edge or punching marks and end of material Label sensor Reflective sensor from the ottom For print marks Distance from the center to the left mm 0 - 58 Processor High Speed 32 Bit clock rate MHz 400 RAM MB 64 Electronics Memory IFFS MB Flash 16 Battery buffer for real time clock , printout of time and date, data storage on shut-down n Warning signal: acoustic signal in case of error n USB 2.0 full speed device for PC connection n Ethernet 10/100 Base T, LPD, RawIP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, n TIME, Zeroconf, mDNS, SOAP Periphery connection n Interfaces 2 x USB Host on operation panel, connection up to 100 mA for memory stick, service key, n WLAN or bluetooth 1 x USB Host on the back, connection up to 500 mA for keyboard, scanner, WLAN or n bluetooth Operation Display Touchscreen 160 x 255 pixel with back light pane Screen diagonals mm 96 Power supply 100–240 VAC, 50/60 Hz Power consumption Energy saving mode 1,8 W/typical 45 W/max. 100 W Operating Operation: + 5 - 40°C / 10 - 85% not condensing data Temperature/humidity Stock: + 0 - 60°C / 20 - 80% not condensing Transport: – 25 - 60°C / 20 - 80% not condensing Approvals CE, FCC class A, CB, CCC, UL 1) All materials are approximate values. Small labels, very thin, narrow, thick or stiff materials as well as labels with strong adhesives need to be tested first.

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by IDENTCO customers for designs and specifications, or be relied on as meeting specific performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact IDENTCO for further information. Revised 11/1/2016

UNITED STATES MEXICO GERMANY PRC MALAYSIA HEADQUARTERS MONTERREY FRANKFURT HONG KONG PENANG 28164 W. Concrete Drive Carr. a Laredo Km. 16.5 Interior Güterbahnhofstrasse 3-7 Unit 1708, 17/F, 9 Wing Hong St. Suite 163E, Level 16, Room 1602 Ingleside, IL 60041 14B, Col. Moisés Sáenz, 66613 63450 Hanau Cheung Sha Wan, Kowloon Hunza Tower Gurney Paragon Phone: +1 (815) 385 - 0011 Apodaca, Nuevo Leon Phone: +49 (6181) 440 830 - 0 Phone: +852 2959 2156 Jalan Kelawei, Georgetown +1 (815) 385 - 0359 Phone: +52 (81) 8008 - 0438 Fax: +49 (6181) 440 830 - 99 Fax: +852 2959 2019 10250 Penang Phone: +6012 466 - 0866