Specialty Handgun Tools 474-484
Total Page:16
File Type:pdf, Size:1020Kb
MANSON PRECISION SPIRAL FLUTE CLYMER SHOTGUN RIM CUTTER & APEX TACTICAL POLYMER LONG FORCING CONE REAMER HEADSPACE RING FORCING CONE FLEX HONE® ARMORER’S BLOCK & TRAY Restore Headspace To Shotgun Chambers Tapered Design Polishes Quickly & Efficiently 8 Flutes Give Smooth, Efficient Cutting Cutter removes metal Gives the forcing cone a gentle taper that reduces recoil and from damaged rim-recess The finishing touch for forcing improves shot patterns. Spiral flutes give a chatter-free cut on all areas. Solder ring in place, recut rim. ab cones cut with Long Forcing Cone 1 Reamers. Taper matches perfectly types of barrel steel. The long shank lets you alter most barrels using SPECS: 55° Cutter - M-7 H/Speed Steel. 5 /4" (13.3cm) long. Bronze pilot 1 so the maximum amount of abra- only a large tap handle to turn the reamer. ab bushing. Rings - 1031 steel. Approx. /4" (6.3mm) long. Block (Gun Not Included) SPECS: M-7 High Speed Steel. 8-flute, right-hand cut with left-hand spiral. #184-115-012AU 12 Ga. Rim Cutter, 4H115E27 � � � � � � � � $ 115.27 sive media contacts the barrel’s 1 7 surface for faster, more effective polishing action, with less elbow 9" (22.9) long, 3 /2" (8.9cm) shank, /16" square. #184-115-020AU 20 Ga. Rim Cutter, 4H115B14� � � � � � � � 115.14 grease and work. Must be used with Flex Hone Oil; use of other oils Supports Polymer-Framed Pistols For #513-010-012AU 12 Ga. Forcing Cone Reamer, #184-116-012AU 12 Ga. Headspace Ring, 4H12C00 � � � 12.00 will destroy the abrasive balls and void the guarantee. ab Armory Work & Disassembly 3A106Q99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 111.99 SPECS: Medium or Fine grit. 10" (25cm) overall length. Abrasive head, 1.625" (4.1cm) long. 12 ga. tapers from .710" to .798" in diameter. 16 ga. High-density polymer block supports S&W M&P and Glock SPECIALTY SHOTGUN TOOLS SHOTGUN SPECIALTY tapers from .665" to .745" diameter. 20 ga. tapers from .615" to .699" polymer-framed pistols without marring and helps with armory diameter. work and disassembly. Special design relieves pressure from critical Item function surfaces and gives easy access to all pins. Moveable bosses SHOTGUN BARREL #080-606-512AU 12 Ga. Medium Grit Flex Hone, 1B38Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99 quickly adjust to hold different size frames. Holes and slots accom- 12, 16, 20 GAUGE ® modate thumb safety and magazine disconnect. Fixed bosses — one POLISHING FLEX HONE #080-607-512AU 12 Ga. Fine Grit Flex Hone, for .45 and the other for 9mm/.40/.357 — hold striker to ease striker 1B55H99 � � � � � � � � � � � � � � � � � � � � � � � � � � 65.99 BARREL HONE EXTENSION SHAFT Puts Finish Polish On spring removal and installation. Special trigger bar block makes it #080-607-516AU 16 Ga. Fine Grit Flex Hone, easy to swap triggers. Armorer’s Tray attaches to the underside of Shotgun Bores That Is 1B55E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 65.99 the block, elevating the work surface nearly an inch, while the in- Truly Outstanding #080-606-520AU 20 Ga. Medium Grit Flex Hone, terior and embedded magnet keep pins and small steel parts from 1B36Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � 43.99 rolling away. Raised edges in the center support the muzzle when Hundreds of abrasive 1 Polish Or Clean The Entire Bore From #080-607-520AU 20 Ga. Fine Grit Flex Hone, taking off slide back plates. Comes with a /16" Allen wrench for the “balls” mounted on a flex- 1 Muzzle To Cone For A Mirror Finish ible shaft - the fastest, easiest way we’ve come across to clean and 1B55E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 65.99 rear sight screw and a /8" roll pin punch that seats into coil roll pins 1 in M&P frames and drives the pins far enough to be out of the way polish older barrels or put a mirror polish in new ones. For used #080-609-008AU /2 Pint Flex Hone Oil, The extra reach you need for full-length bore polishing with but not ejected. Storage slots in the tray for punch and wrench. ab Brownells Barrel Hones and your electric hand drill. Piloted to keep barrels, the Medium-Coarse hone, followed by the Fine, removes 1B11L99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99 rough and tight spots and brings the bore to a bright finish that you SPECS: Polymer, red. Block - 7" (17.7cm) long, 4" (10cm) wide, 1½" (3.8cm) the hone centered for faster, better results. Abrasive paper holder #080-609-000AU Quart Flex Hone Oil, high. Tray - 7" long, 4" wide, .9" (2.3cm) high. 5 can see and feel . just run a patch through it before and after; the helps remove tight spots before honing; /16"-27 tpi shotgun bore 1B18J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 21.99 #100-011-660AU Polymer Armorer’s Block, 7F25C34 � � �$ 28.45 brush adapter lets you do heavy duty cleaning. ab difference is amazing! We found too, that we could feel tight spots 1 during honing and spend extra time on them until they were evened #100-014-075AU Polymer Armorer's Tray, 7F21I11 � � � � � � 23.70 SPECS: Kit includes: Shaft - steel, 28" (71cm) long, /4" (6.3mm) dia. Pilots - Nylon, .12 ga. .715" (18mm) dia., 16 ga. .652" (16.6mm) dia., 20 ga. .605" out. On new barrels, the Fine hone by itself will bring the factory 1 finish up to a beautiful, mirror-bright finish that’s a real customer (15.3mm) dia. Abrasive Holder - Steel, 2" (5cm) long, /2" (12.7mm) dia. 3 pleaser. Easy to use: chuck in a variable speed electric drill; wet the Brush Adapter - Steel, /4" (19mm) long. Shaft coupling will accept .250" ® (6.3) dia. accessories. hone with Flex Hone oil; start the drill and insert the hone into the barrel from the breech end (if possible). As it cuts, a slurry of abrasive #080-915-000AU Barrel Hone Extension Shaft, PROFESSIONAL SERIES and oil develops to help speed the cutting action. Flex Hone® avail- 8K67E99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 78.99 ® able in sets and individual hones for 10, 12, 16 and 20 gauge barrels BARREL HONING STONES MAGAZINE TOOL FOR GLOCK as well as .410 bore. Also, special-sized hones for 10, 12, 16, 20 gauge Removes Base Pads Fast, chambers and .410 bore. Instructions walk you through the steps Gives Shotgun Bore A ® Without Damage for a perfect job. (You MUST use Flex Hone oil - all other oils will Good-As-New Polish destroy the abrasive “balls” and void our guarantee!) 750 RPM MAX. Specialized pliers allow Glock Avoid excess pressure. ab LISLE owners to remove the base pad SPECS: Flex Hone® for Barrels; 10, 12, 16, 20 ga., .410 bore. 33" (83.8cm) Quickly brings your from factory magazines without gouging or cracking the plastic. long in Med.-Coarse grit (red tip) or Fine grit (light blue tip). Flex Hone® shotgun bore to a like SHOTGUN BARREL HONE Small crimping tips contact the magazine precisely above the lock- for Chambers; 10, 12, 16, 20 ga., .410 bore 12" (6.5cm) long, fine grit (light new or better polish. ing tabs. Hardened, steel handles feature the correct geometric cur- No. 2-S blue only). Set includes Med.-Coarse & Fine barrel hones, Chamber hone Five grits provide fast, vature to prevent over-compression of the magazine sidewalls. ab & 1 qt. Flex Hone® oil, for 1 ga. smooth polishing for chrome lined and carbon SPECS: Steel, black finish. 6" (15.2cm) long. Brings Bores & Chokes Back to FLEX-HONE FINE BORE MED. BORE CHAMBER ONE GA. SET steel barels; 500 grit, 400 #080-000-191AU Magazine Tool For Glock, 8K20C99 � �$ 22.99 grit, 150 grit, 150 grit for New-Or-Better Polish SIZE $63.99 $52.99 $52.99 $169.99 10 ga #080-607-210AU #080-606-110AU #080-608-510AU NA chrome bores and a 2-S Lisle stone. Steel carrier, Ample range for 28 ga. to 12 ga. Flex-drive eliminates chatter, 12 ga #080-607-212AU #080-606-112AU #080-608-512AU #080-605-012AU 1 gouging. For /4" or larger electric drill. Included in choke set. ab riveted to arm, fits Lisle No. 2 Barrel Hone. ab SPECIALTY HANDGUN TOOLS SPECIALTY #080-605-016AU 1 1 16 ga #080-607-216AU #080-606-116AU #080-608-516AU C.B. GIORNESTO BERETTA/SIG/TAURUS SPECS: /4" (6.3mm) shaft, 8 /2" (21.6cm) long. SPECS: Aluminum oxide stones, steel carrier. Pak of 2 stones and arms. #531-108-002AU No. 2 Barrel Hone, 1C17C99 � � � � � � � � �$ 18.99 20 ga #080-607-220AU #080-606-120AU #080-608-520AU #080-605-020AU Kit contains 2 stones of each grit. Plastic storage box. VISE BLOCK #531-107-602AU No. 2-S Stones, only, 1C5Q99 � � � � � � � � 6.99 .410 #080-607-241AU #080-606-141AU #080-608-541AU #080-605-041AU #080-000-011AU 500 Grit Profess. Stones, 8K11B99 � � � �$ 13.99 Secure, Hands-Free #076-200-156AU Flex Hone® Inst. please request, #080-000-012AU 400 Grit Professional Stones, BARREL HONE EXTENSION SHAFT - Piloted shaft attaches to 6G00MHP � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ .00 8K11D99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99 Support Of Pistol For your electric hand drill motor and accepts Brownells Barrel Hones. #080-000-013AU 150 Grit Professional Stones, Cleaning & Maintenance Keeps the hone in the center of the bore; prevents expensive dam- FLEX HONE OIL - Specially formulated for use with Flex Hones. 8K11F99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99 Contains both honing and lapping oils in a petroleum base that High-strength polymer age; lets the hone do all the work for faster, better looking results. #080-000-014AU 150 Grit Chrome Bore Stones, will not harm aluminum, brass or steel. (Use of other oils destroys magazine well insert fits double-stack Beretta, SIG, and Taurus pis- Includes abrasive paper holder and a threaded adapter that ac- 8K12M99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99 5 tols. Slides into the mag well and locks tight using the factory latch, cepts all /16"-27 tpi shotgun brushes and mops.