DOCSLIB.ORG

JOURNAL of the PROCEEDINGS of the CITY COUNCIL of the CITY of CHICAGO, ILLINOIS

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
JOURNAL of the PROCEEDINGS of the CITY COUNCIL of the CITY of CHICAGO, ILLINOIS (Published by the Authority of the City Council of the City of Chicago) COPY JOURNAL of the PROCEEDINGS of the CITY COUNCIL of the CITY of CHICAGO, ILLINOIS Regular Meeting-Friday, November 5, 1993 at 10:00 A. M. (Council Chamber-City Hall-Chicago, Illinois) OFFICIAL RECORD. RICHARD M. DALEY ERNEST R. WISH Mayor City Clerk 11/5/93 COMMUNICATIONS, ETC. 39839 Attendance At Meeting. Present - The Honorable Richard M. Daley, Mayor, and Aldermen Mazola, Haithcock, Tillman, Preckwinkle, Bloom, Steele, Beavers, Dixon, Shaw, Buchanan, Huels, Fary, Burke, Jones, Streeter, Murphy, Rugai, Troutman, Evans, Munoz, Laski, Miller, Medrano, Ocasio, Watson, E. Smith, Burrell, Bialczak, Suarez, Gabinski, Mell, Austin, Wojcik, Banks, Giles, Allen, Laurino, O'Connor, Doherty, Natarus, Eisendrath, Hansen, Levar, Shiller, Schulter, M. Smith, Moore, Stone. Absent — Aldermen Madrzyk, Coleman. Call To Order. On Friday, November 5, 1993 at 10:00 A.M., The Honorable Richard M. Daley, Mayor, called the City Council to order. The clerk called the roll of members and it was found that there were present at that time: Aldermen Mazola, Beavers, Dixon, Buchanan, Huels, Fary, Burke, Streeter, Rugai, Evans, Munoz, Laski, Medrano, Ocasio, Burrell, Bialczak, Suarez, Wojcik, Banks, Laurino, Doherty, Eisendrath, Hansen, Levar, Schulter, M. Smith, Stone - 27. Quorum present. Alderman Burke informed the City Council that Alderman Coleman was absent due to the death of her mother, Ms. Ophelia Turner. Invocation. Reverend Daniel O'Neill, Pastor of Saint Gelasius Catholic Church, opened the meeting with prayer. 39840 JOURNAL-CHY COUNCIL-CHICAGO 11/5/93 REPORTS AND COMMUNICATIONS FROM CITY OFFICERS. Referred-AMENDMENT OF THLE 2, CHAPTER 120 OF MUNICIPAL CODE OF CHICAGO TO ESTABLISH BOARD OF UNDERGROUND. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith. Referred to the Committee on Transportation and Public Way: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Transportation, I transmit herewith an ordinance amending Chapter 2-120 ofthe Municipal Code ofChicago to establish the Board of Underground and to define its duties. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. 11/5/93 COMMUNICATIONS, ETC. 39841 Be/erred - AMENDMENT OF TITLE 4, CHAPTERS 60 AND 157 OF MUNICIPAL CODE OF CHICAGO TO ENHANCE DISCLOSURE OF FINANCL/^L AND OWNERSHIP INTERESTS IN LICENSED PUBLIC PLACES OF AMUSEMENT AND BUSINESSES LICENSED TO SELL ALCOHOLIC LIQUOR. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith. Be/erred to the Committee on License and Consumer Protection: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - I transmit herewith an ordinance amending Chapters 4-60 and 4-157 of the Municipal Code of Chicago to require more complete disclosure of financial and ownership interests in licensed public places of amusement and businesses licensed to sell alcoholic liquor. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. 39842 JOURNAL-CHY COUNCIL-CHICAGO 11/5/93 Referred - AMENDMENT OF TITLE 10, CHAPTER 20 OF MUNICIPAL CODE OF CHICAGO TO REQUIRE CERTIFICATION OF COMPLETION OF PAVEMENT RESTORATION WORK. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith, Referred to the Committee on Transportation and Public Way: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Transportation, I transmit herewith an ordinance amending Chapter 10-20 ofthe Municipal Code ofChicago to require certification ofthe completion of pavement restoration work. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. Referred-ESTABLISHMENT AND FINANCING OF 72ND AND CICERO REDEVELOPMENT PROJECT AREA. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinances transmitted therewith. Be/erred to the Committee on Finance: 11/5/93 COMMUNICATIONS, ETC. 39843 OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Planning and Development, I transmit herewith three ordinances relating to the establishment and financing of the 72nd and Cicero Redevelopment Project Area. Your favorable consideration of these ordinances will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. Be/erred-ESTABLISHMENT AND FINANCING OF 73RD AND KEDZIE REDEVELOPMENT PROJECT AREA. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinances transmitted therewith. Be/erred to the Committee on Finance: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Planning and Development, I transmit herewith three ordinances relating to the establishment and financing of the 73rd and Kedzie Redevelopment Project Area. 39844 JOURNAL-CHY COUNCIL-CHICAGO 11/5/93 Your favorable consideration of these ordinances will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. Referred-DECLARATION OF OFFICIAL INTENT BY CITY OF CHICAGO TO OBTAIN REIMBURSEMENT FROM PROCEEDS OF TAX EXEMPT BONDS FOR CAPHAL EXPENDITURES FOR IMPROVEMENTS AT MIDWAY AIRPORT. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith, Be/isrred to the Committee on Finance: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the City Comptroller, I transmit herewith an ordinance declaring the official intent of the City of Chicago to obtain reimbursement from proceeds of tax exempt bonds for capital expenditures for improvements at Midway Airport. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. 11/5/93 COMMUNICATIONS, ETC. 39845 Referred - AUTHORIZATION FOR EXECUTION OF INTERGOVERNMENTAL AGREEMENT WHH ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES ALLOWING USE OF STATE PROPERTY FOR STORAGE AND REMOVAL OF SALT. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith. Be/erred to the Committee on Finance: OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Conimissioner of Streets and Sanitation, I transmit herewith an ordinance authorizing the Commissioner to execute an intergovernmental agreement on behalf of the City with the Illinois Department of Central Management Services (D.C.M.S.) allowing the City to use D.C.M.S. property for the purpose of storing and removing salt. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. Referred - AMENDMENT OF INTERGOVERNMENTAL AGREEMENT WITH UNIVERSITY OF ILLINOIS RELATING TO OPERATION OF MILE SQUARE HEALTH CENTER. The Honorable Richard M. Daley, Mayor, submitted the following 39846 JOURNAL-CHY COUNCIL-CHICAGO 11/5/93 communication which was, together with the proposed ordinance transmitted therewith. Be/erred to the Committee on Finance: OFFICE OF THE MAYOR CITY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Health, I transmit herewith an ordinance amending an intergovernmental agreement between the City of Chicago and the University of Illinois relating to the operation ofthe Mile Square Health Center. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed) RICHARD M. DALEY, Mayor. Referred - AUTHORIZATION FOR EXECUTION OF COMMUNITY DEVELOPMENT FLOAT LOAN AND SECURHY AGREEMENT WITH MORAND BROTHERS BEVERAGE COMPANY (DOING BUSINESS AS ROMANO BROTHERS BEVERAGE COMPANY) FOR IMPROVEMENT OF PROPERTY AT 2555 - 2641 SOUTH LEAVITT STREET. The Honorable Richard M. Daley, Mayor, submitted the following communication which was, together with the proposed ordinance transmitted therewith. Be/erred to the Committee on Finance: 11/5/93 COMMUNICATIONS, ETC. 39847 OFFICE OF THE MAYOR CHY OF CHICAGO November 5,1993. To the Honorable, The City Council of the City of Chicago: LADIES AND GENTLEMEN - At the request of the Commissioner of Planning and Development, I transmit herewith an ordinance authorizing execution of a Community Development Float Loan and Security Agreement with Morand Brothers Beverage Company, doing business as Romano Brothers Beverage Company, for improvement of property located at 2555 -.- 2641 South Leavitt Street. Your favorable consideration ofthis ordinance will be appreciated. Very truly yours, (Signed)
Load more

Recommended publications
  • Graphic Arts: Book Three
    DOCUMENT RESUME. ED 219 652 CE 033 509 AUTHOR Farajollahi, Karim; And Others 'TITLEN, Graphic Arts: Book Three. The Press and Related Processes. INSTITUTION Mid-America Vocational Cureiculum Consortium, Stillwater Okla. 4 PUB DATE 82 NOTE 294p.; _For related documents see CE 033 507-508. AVAILABLE FROMMid-America Vocational Curriculum Consortium, 1515 West Sixth Avenue, Stillwater, OK 74074. EpRS PRICE MF01 Plus Postage. PC Not Available from EDRS. IIESCRIPTORS Competency Based Education; Criterion Referenced Tests; *Equipment Maintenance; *Graphic Arts; Instructional Materials; Learningittivities; laper (Material); Postsecondary Education; *Printing;* *Production Techniques; *Reprography; Supplies; *Technical Education IDENTIFIERS *Printing Presses ABSTRACT The third of a three-iolume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related erocesselA Covered in the unitS are basic press fundamentals, offset presir 'syitems, offset press operating procedures, offset inks and dampening chemistry, preventive Maintenance and trouble shooting, 'other printing processes,.cost awareness, binding and finishing, and calculating paper cutting. Each unit contains some or all of the following: performanCe objecti4es, suggested activities for.teachers, information sheetS, assignment sheets, job sheets; visual aids, tests, and test,answers. Instructional materials in thepublication are written in terms of student performanceusing measurable objectives. (MN) *********i')i************************************************************
    [Show full text]
  • Final Paper Products Recovered Materials Advisory Notice Response to Public Comments
    FINAL PAPER PRODUCTS RECOVERED MATERIALS ADVISORY NOTICE Response to Public Comments Office of Solid Waste U.S. Environmental Protection Agency April 1996 CONTENTS I. Introduction . 1 A. The Draft Paper Products Recovered Materials Advisory Notice . 1 B. Overview of the RCRA Requirements . 1 C. Overview of the Executive Order Provisions for Paper . 3 II. Applicability . 5 A. Background. 5 B. Comments and Agency Response. 5 III. EPA's Objectives . 7 A. Background. 7 B. Comments and Agency Response. 7 IV. EPA's Approach to Recommendations. 11 A. Background . 11 B. Comments and Agency Response . 11 V. EPA's Methodology . 14 A. Background . 14 B. Comments and Agency Response . 14 VI. Recommendations for Printing and Writing Papers. 15 A. Background . 15 B. Comments and Agency Response . 19 VII. Recommendations for Newsprint . 27 A. Background . 27 B. Comments and Agency Response . 27 VIII. Recommendations for Tissue Products. 31 A. Background . 31 B. Comments and Agency Response . 32 IX. Recommendations for Paperboard and Packaging Products . 36 A. Background . 36 B. Comments and Agency Response . 38 X. Recommendations for Miscellaneous Paper Products. 45 A. Background . 45 B. Comments and Agency Response . 45 XI. Recommendations for Measurement. 46 A. Background . 46 B. Comments and Agency Response . 46 XII. Recommendations for Specifications. 48 A. Background . 48 B. Comments and Agency Response . 48 XIII. Recommendations for Recyclability. 49 A. Background . 49 B. Comments and Agency Response . 49 XIV. Definitions . 51 A. Background . 51 B. Comments and Agency Response . 51 XV. Certification and Verification . 54 A. Background . 55 B. Comments and Agency Response . 55 XVI. Sawdust as Recovered Fiber.
    [Show full text]
  • Government Paper Specification Standards
    Government March 2011 No. 12 Government March 2011 No. 12 Printed on recycled paper For sale by the Superintendent of Documents, U.S. Government Printing Office Internet: bookstore.gpo.gov Phone: toll free (866) 512-1800; DC area (202) 512-1800 F1ax: (202) 512-2104 Mail: Stop IDCC, Washington, DC 20402-000 ISBN 978-0-16-088382-8 U.S. GOVERNMENT PRINTING OFFICE WILLIAM J. BOARMAN Keeping America Informed I www.gpo.gov Public Printer of the United States March 16, 2011 The Honorable Joseph R. Biden The President of the Senate The Honorable John A. Boehner The Speaker of the House of Representatives Sirs: I have the honor to transmit herewith the Annual Report of the U.S. Government Printing Office (GPO) for the fiscal year ending September 30, 2010. The report contains the results of an audit of GPO’s financial statements conducted by an independent accounting firm. Respectfully submitted, WILLIAM J. BOARMAN Public Printer 732 North Capitol Street, NW, Washington, DC 20401-0001 I [email protected] TABLE OF CONTENTS Advisory Council on Paper Specifications ………………………………………… v Introduction …………………………………………………………………………. vii Recycled Fiber Content and Permanent Paper Standards ………...……….…………. ix Part 1. Specifications ………………...……………………………………………... 1 Runnability Requirements for Paper Used in a Federal Printing Plant ………………. 3 Printing Papers ………………………………………………………………………. 5 JCP A10: Newsprint JCP A25: Heat-Set Web Offset Machine-Finish Book JCP A50: Machine-Finish Book End JCP A55: Heat-Set Web Offset Book JCP A60: Offset Book JCP A61: No. 1 Offset
    [Show full text]
  • Pastel Framing Tips Here Are Some Tips on Framing Pastels That Will Help You Frame Your Pastel Paintings Properly and Easily
    tips & ideas Pastel Framing Tips Here are some tips on framing pastels that will help you frame your pastel paintings properly and easily. by Greg Fremstad Backing Backing Backing Backing Framing with mats or Pastel Pastel Pastel without (matless) Pastel Let’s Start with with the Second Mat Second Mat Second Mat Second Mat matted version first. Front Mat Front Mat Front Mat Front Mat Mats provide airspace Foam Board Foam Board between the glass and Glass Lifter Lifter the face of the art. They Glass Glass promote air circulation Glass that prevents mold growth and moisture that buckles the art. Mats with a standard bevel as shown in the cross sections in Fig 1 Fig 2 Fig 3 Fig 4 Figure 1 creates problems. Standard Bevel Standard Bevel Reverse Bevel Reverse Bevel Pastel dust that falls off Double Mat Double Mat Double Mat Double Mat the painting settles on With Lifter With Lifter the bevel of the mat(s). You can lessen this situation by lifting the mat(s) up off the painting by inserting strips of mat board or foam board behind the mats to make a generous space for the dust to fall into. Make sure the lifters go all the way to the outside edge of the mats to support the backing. (See Figure 2) The dust will settle on the mat bevels and every time the frame is jostled the dust will filter down between the mat and the glass. Another good remedy uses “reverse bevel” mat(s) as shown in Figures 3 and 4.
    [Show full text]
  • Transformation Begins Here
    1 EXTENDED LEARNING Transformation begins here. Schedule of Remote Classes WINTER 2021 | LBCC EXTENDED LEARNING Click here to register or call 541-917-4840 M = Monday; T = Tuesday; W = Wednesday; R = Thursday; F = Friday; S = Saturday; U = Sunday 2 t Table of Contents Get to know us! How to Attend a Zoom Class........................................03 Meet Tatiana and Tina, multi-talented Instructors Tell Us About Themselves........................04 gurus who provide essential support to our LBCC Extended Learning programs. Community Education Arts & Crafts......................................................................05 Computer Skills & Technology......................................07 My role provides opera- Consumer Education......................................................08 tional support across the team to align short and Fitness & Dance...............................................................10 long-term goals – a dream Food & Drink.....................................................................12 job for me! Grounding my life are two amazing men Garden, Nature & Outdoor.............................................13 (my husband and son), as Health & Wellness............................................................13 well as living in the coun- History, Culture, Religion & Ethics................................15 try and gardening. I like a strong cup of black tea Home & DIY.......................................................................16 Tatiana Wicke and I make the best grilled Language...........................................................................16
    [Show full text]
  • STP60-B-EB/Jul. 1963
    STP60-B-EB/Jul. 1963 INDEX A Blotting paper, 1, 11 Absorbency, 51, 52 Boards, 28 Acidity (see also pH Value) types, 29 determination of, 59 uses, 29 of bond papers, 20 Bogus bristol, 22 Adhesives in paper, 70 Bond inks, 47 Aging, accelerated test for, 82 Bond papers, 18, 41 Air permeability, 61 Bonding strength, surface, I10 Alkalinity (see also pH Value), 59 Book inks, 47 Alpha-cellulose, 62, 76 Book papers, 40, 121 Aniline sulfate stain for groundwood, 78 Boxboards, 34 Antique finish, 41 Bright fiber stain, 77 Apparent density, 121, 122 Brightness, 4, 73, 101 Asbestos paper, 39 Bristol board, 35 Ash content Bristols, 21, 42 determination of, 63 Brush surface analyzer, 113 examination of, 63 Buffer action, 60 of bond papers, 20 Building boards, 36 related to other properties, 64 Building papers, 23, 36 significance of, 63 Bursting strength, 68 Asphalt impregnated papers, 24, 90 determination of, 69 ASTM methods, vii of bond papers, 19 Automotive panel boards, 37 of envelope papers, 28 significance of, 69 B C Bag papers, 17 "C" stain for fibers, 77 Basis weight Calender cuts, 86 paper, 65 Caliper (see also Thickness) paperboard, 67 bond paper, 19 wedding bristols, 22 paperboard, 33 Beach puncture test, 103 Capacitor paper, thickness of, 121 Beating of fibers, 1, 76 Cardboard, 35 Bekk smoothness tester, 113 Cards, thickness of, 121 Bending board, 34 Casein, 71, 97 Bending chip, 80 Castor oil test, 88 Ben&sen smoothness tester, 113 Cellulose, 2, 62, 92, 100 Beta-cellulose, 62 Chapman smoothness tester, 113 Binders board, 36 Chipboard, 33
    [Show full text]
  • Government Paper Specification Standards | September 2019 | No.13
    GOVERNMENT SEPTEMBER 2019 | NO. 13 September 2019 TO: HEADS OF DEPARTMENTS AND AGENCIES The U.S. Government Publishing Office (GPO) provides Federal agencies with highly valuable advice and assistance in obtaining their printing needs. One of the ways in which we provide this assistance is in the development and issuance of Government paper standards. The purpose of these standards is to (1) achieve compliance with relevant statutes regarding printing papers; (2) address environmental, workplace safety, and paper longevity issues; and (3) maximize savings in the Government’s paper purchases and ultimately your print projects. These standards are available for use by all departments of the Government and their field offices. Some standards are specialty grades with limited availability and have been designated within the standard. Generally these stocks are procured as mill run quantities. There is maximum flexibility in specifying color, texture, and recycled content. The use of these standards will achieve the greatest possible savings in paper stocks for your agency’s printing needs. If you have any questions about unique substrates such as paper manufactured with security features, please contact your National Accounts Manager. Please do not hesitate to contact your GPO customer service representative with any suggestions you may have to improve this publication. Sincerely, Government Publishing Office Government Paper Specification Standards | September 2019 | No.13 TABLE OF CONTENTS Part 1. Specifications 1 Runnability Requirements for Paper Used in a Federal Printing Plant 3 Text Papers 5 JCP A15: Newsprint JCP A25: Uncoated Heat-Set Machine-Finish Web Text JCP A50: Uncoated Machine-Finish Book End JCP A55: Heat-Set Web Text JCP A60: Uncoated Text JCP A61: No.
    [Show full text]
  • TAPPI Standards: Regulations and Style Guidelines
    TAPPI Standards: Regulations and Style Guidelines REVISED January 2018 1 Preface This manual contains the TAPPI regulations and style guidelines for TAPPI Standards. The regulations and guidelines are developed and approved by the Quality and Standards Management Committee with the advice and consent of the TAPPI Board of Directors. NOTE: Throughout this manual, “Standards” used alone as a noun refers to ALL categories of Standards. For specific types, the word “Standard” is used as an adjective, e.g., “Standard Test Method,” “Standard Specification,” “Standard Glossary,” or “Standard Guideline.” If you are a Working Group Chairman preparing a Standard or reviewing an existing Standard, you will find the following important information in this manual: • How to write a Standard Test Method using proper terminology and format (Section 7) • How to write TAPPI Standard Specifications, Glossaries, and Guidelines using proper terminology and format (Section 8) • What requirements exist for precision statements in Official and Provisional Test Methods (Sections 4.1.1.1, 4.1.1.2, 6.4.5, 7.4.17). • Use of a checklist to make sure that all required sections have been included in a Standard draft (Appendix 4). • How Working Group Chairman, Working Groups, and Standard-Specific Interest Groups fit into the process of preparing a Standard (Section 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.4, 6.4.6, 6.4.7). • How the balloting process works (Sections 6.4.6, 6.4.7, 6.4.8, 6.4.9) • How to resolve comments and negative votes (Sections 9.5, 9.6, 9.7) NOTE: This document covers only the regulations for TAPPI Standards, which may include Test Methods or other types of Standards as defined in these regulations.
    [Show full text]
  • Publications on Paper and Paper Research by the Staff of The
    Letter vii-3 Circular LC 447 DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS WASHINGTON (August 21, 1935) PUBLICATIONS ON PAPER AND PAPER RESEARCH BY THE STAFF OF THE NATIONAL BUREAU OF STANDARDS EEPAHTMEFT CE COMMERCE HATI017AL BUREAU OF STANDARDS FASEIHGTOH Letter VI 1-3 Circular (August 21, 1935) LC 447 PUBLICATIONS OiT PAPES AID FARES .RESEARCH SI THE STAFF OF THE 1. FAT I ORAL EUSEAU OF STANDARDS GEHEKAL IFFOSI AT I OF Character of Researches The paper research of the Fa.tional Bureau of Standards consists of studies re- lated to the standardization2. of paper and the materials and processes used in its manufacture. The work on the standardization of paper leads to formulation of standards of quality, and includes, necessarily, the development of means of measuring quality. Eor research related to the manufacture of paper, the paper section is equipped with complete lahoratory and semi- commercial papermaking facilities. This is used to o’: tain information which will assist the paper maker in obtaining the desired qualities in paper at a minimum of cost, in developing new or improved paper products, and in utilizing new fibrous raw materials, parti- cularly waste materials. General3. Scope of Bureau Work The Bureau of Standards is charged with the development, construction, custody, and maintenance of reference and working standards, and their intercomparison, im- provement, and application in science, engineering, industry, and commerce. The bureau is organized in three principal groups - research and testing; commercial standardization; administrative4. work, operation of plant, and construction of lab- oratory instruments and apparatus . The following divisions comprise the research and testing group; electricity, weights and measures, heat and power, optics, chemistry, mechanics ana sound, organic and fibrous materials, metallurgy, clay and silicate products.
    [Show full text]
  • Introduction to Bagasse Products
    Developments in pulp and paper manufacture from sugarcane bagasse Symposium and Workshop May 3 - 4, 2007 QUT, Gardens Point Campus, Brisbane Introduction to Bagasse Products Robert (Bob) W. Hurter, MBA, P. Eng. President HurterConsult Incorporated 4 – 5330 Canotek Road Ottawa, Ontario, Canada K1J 9C1 Email: [email protected] Web site: www.HurterConsult.com 1 Bagasse Pulps Short fiber pulp similar to hardwoods - generally considered a hardwood substitute. Typically, mixed with a portion of long fiber softwood pulp. Amount of bagasse pulp used depends on availability and cost of woodpulp, and paper or board properties desired. 2 Straw Pulps Bleached straw market pulp mills common in Europe up to the late 1960's. Used as a specialty pulp added in amounts of 10 - 20% to printing and writing papers, offset papers, banknote papers, drawing papers, waxing papers, bristol board and greaseproof papers. Used to improve formation, see-through and smoothness, and to impart stiffness and rattle. 3 Bagasse Pulps Also can be used as an additive to woodpulp papers to impart certain properties to the paper. But, virtually all bagasse pulp mills are integrated with paper mills and are located in regions where wood is either unavailable or woodpulp is expensive. 4 Bagasse Pulps Objective is not to improve certain paper properties but to use as little woodpulp as possible. Often sacrifice quality where necessary. Adjusting paper quality to suit regional requirements and the limitations of the raw materials available is a sound approach.
    [Show full text]
  • Agricultural Residues
    Agricultural Residues (Wastes) for Manufacture of Paper, Board, and Miscellaneous Products: Background Overview and Future Prospects Yehia Fahmy, Tamer y A Fahmy, Fardous Mobarak, Mohamed El-Sakhawy, Mh Fadl To cite this version: Yehia Fahmy, Tamer y A Fahmy, Fardous Mobarak, Mohamed El-Sakhawy, Mh Fadl. Agricul- tural Residues (Wastes) for Manufacture of Paper, Board, and Miscellaneous Products: Background Overview and Future Prospects. International Journal of ChemTech Research, Sphinx Knowledge House, 2017, 10 (2), pp.424-448. hal-01613635 HAL Id: hal-01613635 https://hal.archives-ouvertes.fr/hal-01613635 Submitted on 10 Oct 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Distributed under a Creative Commons Attribution| 4.0 International License International Journal of ChemTech Research CODEN(USA): IJCRGG, ISSN: 0974-4290, ISSN(Online):2455-9555 Vol.10 No.2, pp 424-448, 2017 Agricultural Residues (Wastes) for Manufacture of Paper, Board, and Miscellaneous Products: Background Overview and Future Prospects Yehia Fahmy; Tamer Y A Fahmy*; Fardous Mobarak; Mohamed El-Sakhawy; M H Fadl Cellulose and Paper Department, National Research Center, Sh. El-Tahrir, Dokki, Cairo, Egypt Abstract: An extensive background overview on the use of agricultural residues (wastes) for production of paper, board, binderless board, energy, different types of fuels by pyrolysis (solid, liquid and gaseous fuel), many petrochemicals substitutes, charcoal (active carbon), dissolving pulps and rayon.
    [Show full text]
  • From Trash to Treasure
    4-H MOTTO Learn to do by doing. 4-H PLEDGE I pledge My HEAD to clearer thinking, My HEART to greater loyalty, My HANDS to larger service, My HEALTH to better living, For my club, my community and my country. 4-H GRACE (Tune of Auld Lang Syne) We thank thee, Lord, for blessings great On this, our own fair land. Teach us to serve thee joyfully, With head, heart, health and hand. This project was developed through funds provided by the Canadian Agricultural Adaptation Program (CAAP). No portion of this manual may be reproduced without written permission from the Saskatchewan 4-H Council, phone 306-933-7727, email: [email protected]. Developed: September 2013. Writer: Kristal Kennett, BSc Hon, MRM Table of Contents Introduction Objectives .................................................................................................................... 1 Achievement Day Requirements of this Project ......................................................... 1 Getting the Most from this Project ............................................................................. 1 Resources for Learning ................................................................................................ 1 Before We Get Started ................................................................................................ 2 The Basics .................................................................................................................... 4 Materials and Supplies ...............................................................................................
    [Show full text]