Waterborne Lacquer

Total Page：16

File Type：pdf, Size：1020Kb

Waterborne Lacquer The pinnacle of wood protection. Waterborne Lacquer Zenith™ Waterborne Lacquer is a third-generation waterborne coating designed for finishing fine woodwork. It has exceptional film clarity that retains the natural warmth and character desired by professional wood finishers. It has been formulated with proprietary resin technology to yield a finish that is superior in durability to conventional nitrocellulose finishes. Zenith Waterborne Lacquer is a low VOC, HAPS-free formulation that contains no isocyanate or formaldehyde. It is a coating that is not only beautiful and durable, but also reduces hazards to workers, consumers and the environment. ADVantagES USES Regulatory Zenith Waterborne Lacquer is ideal for • HAPS-free/Low VOC • Low Odor • Non-Flammable a broad range of products including: • Water Clean-up • Formaldehyde-free/Isocyanate-free fine residential furniture, millwork, Application moldings, interior doors, and picture • Improved Coverage – Requires less volume of product frames. The environmentally friendly per piece than traditional solvent-based coatings formula also yields a finish that is perfect • Very Limited Grain Raise for children’s furniture and consumers • Ready-to-Spray and Self-Sealing that are sensitive to harsh chemicals. • Fast Dry-to-Sand and Recoat (30 minutes) This product can be applied with the • Excellent Flow and Leveling following spray equipment: conventional, • Hybrid Solvent/Water Systems available HVLP, airless or air-assisted airless. It is Durability packaged ready-to-spray and requires no • 30% Weight Solids reduction before use. • Excellent UV Resistance • Non-yellowing • Superior Performance Compared to Conventional Nitrocellulose Finishes PERFORMANCE AND TESTING DATA Household Chemical Testing Hot/Cold Check Cycles Zenith Waterborne Lacquer has been laboratory tested with the following reagents to assure the The hot/cold check cycle determines highest performance standards: a coating’s tolerance to hot and cold temperature extremes. Hot Coffee . No effect Grape Juice . No effect Tequila . N o e f f e c t Tea . No effect Catsup . No effect Vodka . No effect Passes: 20 cycles Cola . No effect Vinegar . No effect Stamp Pad Ink . No effect Furniture Polish . N o e f f e c t Ammonia . No effect Standing Water . N o e f f e c t Lemon Juice . N o e f f e c t Ice Water (2 hours) . No effect Mustard (1 hour) . No effect Orange Juice . No ef fect Whiskey . No effect Test procedure: Reagents were tested for 24 hours, unless otherwise stated. For additional information, visit our web site valsparwood.com PWG541-09 ValZN0100.

Copy Link

Recommended publications

Burning in Naval Stores Forest
Proceedings: 3rd Tall Timbers Fire Ecology Conference 1964 Burning in Naval Stores Forest NORMAN R. HAWLEY Naval Stores Conservation Program U. S. Forest Service Valdosta, Georgia BEFORE discussing woods burning in naval stores, what is naval stores? First, be it understood that there are three fields within the activity, namely (1) wood distillation, or the process of obtaining the desired product from pine stumps; (2) the capture of tall oil in the sulfate pulping process, and (3) gum naval stores, or the harvesting of oleoresin or gum from standing, living pine trees, ob tained throughout a long working season of some seven months annually. Today, I shall discuss fire in its relation to the gum naval stores business. But first, how did the activity derive its odd name? There is cause for puzzlement. The story is told-with tongue in cheek-that a Secretary of the Navy, somewhat confused, but firm in his resolve to be prepared, declared: "I don't know what it is, but let's get some of it!" The term is a carry-over from the days of sail. Then the product was in prime demand. It caulked the hulls of wooden ships, and treated rigging against the erosive action of sun, rain, wind, ice, and salt water. How old is the business? We know that flammable gum featured heavily in the combustibles tossed around in ancient Mediterranean sea fights. Some writers speak with authority that it dates from the year 315 B. C. Others point to the Bible and quote from chapter and verse how Noah treated the hull of the Ark with derivatives from the 81 NORMAN R.
[Show full text]
Tar and Turpentine
ECONOMICHISTORY Tar and Turpentine BY BETTY JOYCE NASH Tarheels extract the South’s first industry turdy, towering, and fire-resistant longleaf pine trees covered 90 million coastal acres in colonial times, Sstretching some 150,000 square miles from Norfolk, Va., to Florida, and west along the Gulf Coast to Texas. Four hundred years later, a scant 3 percent of what was known as “the great piney woods” remains. The trees’ abundance grew the Southeast’s first major industry, one that served the world’s biggest fleet, the British Navy, with the naval stores essential to shipbuilding and maintenance. The pines yielded gum resin, rosin, pitch, tar, and turpentine. On oceangoing ships, pitch and tar Wilmington, N.C., was a hub for the naval stores industry. caulked seams, plugged leaks, and preserved ropes and This photograph depicts barrels at the Worth and Worth rosin yard and landing in 1873. rigging so they wouldn’t rot in the salty air. Nations depended on these goods. “Without them, and barrels in 1698. To stimulate naval stores production, in 1704 without access to the forests from which they came, a Britain offered the colonies an incentive, known as a bounty. nation’s military and commercial fleets were useless and its Parliament’s “Act for Encouraging the Importation of Naval ambitions fruitless,” author Lawrence Earley notes in his Stores from America” helped defray the eight-pounds- book Looking for Longleaf: The Rise and Fall of an American per-ton shipping cost at a rate of four pounds a ton on tar Forest. and pitch and three pounds on rosin and turpentine.
[Show full text]
Watco® Lacquer Clear Wood Finish Is a Durable Lacquer Finish APPLICATION Designed for Spray Or Brush Application on Wood
TECHNICAL DATA WAT-01 WATCO® LACQUER CLEAR WOOD FINISH DESCRIPTION AND USES PRODUCT APPLICATION (cont.) Watco® Lacquer Clear Wood Finish is a durable lacquer finish APPLICATION designed for spray or brush application on wood. It fills in the pores of most woods, eliminating the need for wood filler. It is Use adequate ventilation at all times. Do not apply in direct ideal for furniture, doors, cabinets and paneling. It is not sunlight. Apply only when the air and surface temperatures recommended for floors or exterior surfaces. are between 55-90°F (13-32°C) and the relative humidity is PRODUCTS below 85%. If applying over white or pastel paints or stains, test in an inconspicuous area before beginning. Testing is SKU SIZE DESCRIPTION important when applying over paints or stains as an undesired 63081 / 302656 Spray Gloss Clear appearance may occur when these products are topcoated 63041 / 303238 Quart Gloss Clear with a lacquer finish. 63031 Gallon Gloss Clear 33181 / 302657 Spray Semi-Gloss Clear BRUSH - Stir thoroughly before and during use. To prevent bubbles in the finish, DO NOT SHAKE, over brush, or apply 63141 Quart Semi-Gloss Clear with a roller. Apply using a good quality bristle brush or 63131 Gallon Semi-Gloss Clear applicator. Allow the finish to dry 2 hours and then recoat. 63281 / 302658 Spray Satin Clear Recoat only when the previous coat has dried clear and feels 62341 Quart Satin Clear hard. If any coat has dried more than 6 hours, lightly sand 6331 Gallon Satin Clear with 220 grit sandpaper before recoating to avoid brush 321534 Spray Matte Clear marks.
[Show full text]
You Ever Wanted to Know About Varnish by Mary Kingslan Gibilisco
All You Ever Wanted to Know About Varnish by Mary Kingslan Gibilisco This article originally appeared in the Decorative Painter. Shellac Shellac is a very widely used resin varnish that is alcohol The painting is finished and now it is time to varnish. This soluble. The source of shellac resin is a brittle or flaky secre- strikes terror in the heart of many painters as varnish is a tion of the female lac insect, Kerria lacca, found in the for- chemical process that can be difficult to control. Follow the ests of Assam and Thailand and harvested from the bark of guidelines outlined in the article and eliminate the fear of the trees where she deposits it to provide a sticky hold on the varnish! trunk. Shellac is the basis of French polish, which for centu- ries has been the preferred finish for fine furniture. What is varnish? Varnish is a transparent, hard, protective finish. After being applied, the ingredients in varnishes either harden either through evaporation or through chemical change. Resin var- nishes “dry” by evaporation of the solvent and harden al- Lacquer most immediately upon drying. Acrylic and waterborne var- nishes “dry” upon evaporation of the water but experience The word lacquer refers to quick-drying, solvent-based var- an extended curing period. Oil, polyurethane, and epoxy var- nishes or paints. Although their names may be similarly de- nishes remain liquid even after evaporation of the solvent rived, lacquer is not the same as shellac and is not dissolved but quickly begin to cure, undergoing successive stages from in alcohol.
[Show full text]
EC Duro-Bond Rubber Sheet Linings Description
EC Duro-Bond Rubber Sheet Linings Description Both Soft Natural Rubber and Hard Natural Rubber Linings are offered by Electro Chemical. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available. Soft Natural Rubber DURO-BOND S-123 is an uncured, soft three ply rubber sheet lining. The lining consists of a soft ply bonded to the substrate, a semi-hard center ply, and a soft natural outer ply. Hard Natural Rubber DURO-BOND SH-160 is an uncured, flexible, hard rubber sheet lining. It is a high grade, duplex rubber sheet lining consisting of a flexible ebonite semi-hard rubber layer backed with a thin layer of soft gum rubber. DURO-BOND SH-160CL is the same lining except that it is specifically formulated for chlorine service. Uses DURO-BOND S-123 Soft Natural Rubber is used as a general purpose lining material for resistance to chemical agents and abrasion. It is generally resistant to alkalis, numerous acidic and organic chemicals and inorganic salts, and is used for lining equipment such as steel tanks, agitated vessels, agitators and related process equipment. When resistance to a combination of high temperature conditions and abrasive situations is required, DURO-BOND S-123 proves to be quite useful. DURO-BOND SH-160 and SH-160CL Hard Natural Rubbers are used as a lining material when resistance to a wide variety of corrosive materials at continuous elevated temperatures is required. DURO-BOND SH-160 and DUROBOND SH-160CL resists the low concentration, high temperature conditions generally found in water treatment facilities and other chemical environments including pickling solutions and strong acids at high temperatures.
[Show full text]
Finishing Techniques.Pdf
Finishing Techniques Al Miotke Sept 8, 2020 Share your ideas Agenda 1. Preparing the surface 2. Types of Finishes 3. Goals of the final finish 4. Pro’s/Con’s of each finish option 5. Filling the grain 6. Finish the finish 7. Applying a Gloss finish Good Reference materials Three stages of finishing 1. Surface preparation 2. Selecting and applying the finish 3. Finishing the finish Select the best finish for each piece Surface Preparation 1. Cut as clean as possible. 2. Go thru the grits to at least 320 or 400. • Depends on type of wood and finish you plan to apply and sheen you want. 3. Sand with the grain with last grit. 4. Don’t overheat the wood. Keep speed low. 5. Don’t over sand especially on soft or open grain woods. What are the common Finishes? 1) Oil • Natural product extracted from walnut, linseed, Tung, soy bean, etc. • Polymerized oil is heated to about 500 degrees in absence of oxygen, dryers sometimes added. Goal is to dry faster • Provided a natural looking finish but limited protection 2) Shellac • Shellac is a resin secreted by the female lac bug on trees in the forests of India and Thailand. • Friction Polish – Shellac, Alcohol, Boiled Linseed Oil, Beeswax optional 3) Varnish • Synthetic product made by cooking a drying oil and add resin like urethane or Alkalyd. • Wiping Varnish – Varnish/thinner blend 4) Lacquer • Nitrocellulose lacquer is mostly solvent-based and comprised of plant-based substances like cotton, mixed nitric and sulfuric acids. 5) Wax • Beeswax, carnuba • Provides little protection but adds sheen and maintains natural color • Used as both a finish and a polish.
[Show full text]
Color Chart.Pdf
® Finishing Products Division of RPM Wood Finishes Group Inc. Color Chart The Original Touch Up Company™ Made in the USA Color Chart ® Finishing Products Division of RPM Wood Finishes Group, Inc. Index Aerosols 1-5 Ultra® Classic Toner & Tone Finish Toner 1-3 Colored Lacquer Enamel 3-5 Shadow Toner 5 Touch-Up Markers/Pencils 5-15 Ultra® Mark Markers 5-9 3 in 1 Repair Stick 9 Pro-Mark® Markers 9-10 Quik-Tip™ Markers 10-11 Background Marker Touch-Up & Background Marker Glaze Hang-Up 11-13 Artisan Glaze Markers 13 Vinyl Marker Glaze Hang-Up 14 Brush Tip Graining Markers 14 Accent Pencils 15 Blend-Its 15 Fillers 15-29 Quick Fill® Burn-In Sticks 15-16 Edging/Low Heat Sticks 16 E-Z Flow™ Burn-In Sticks 16-17 PlaneStick® Burn-In Sticks 17-18 Fil-Stik® Putty Sticks 18-25 Hard Fill & Hard Fill Plus 25-27 PermaFill™ 27 Epoxy Putty Sticks 27-28 Patchal® Puttys 28-29 Knot Filler 29 Fil-O-Wood™ Wood Putty Tubes 29 Color Replacement 30-31 Blendal® Sticks 30 Sand Thru Sticks 30-31 Blendal® Powder Stains 31 Bronzing Powders 31 Dye Stains 32 Ultra® Penetrating & Architectural Ultra® Penetrating Stain 32 Dye Concentrate 32 Pigmented Stains 32-34 Wiping Wood™, Architectural Wiping Stain & Wiping Wood™ Stain Aerosols 32-33 Designer Series Stain, Designer Series Radiant Stain 33-34 Glazes 34 Finisher’s Glaze™ Glazing Stain & Aerosols 34 Break-A-Way™ Glaze & Aerosols 34 Leather Repair 35-37 E-Z Flow™ Leather Markers 35 Leather/Vinyl Markers 35 Leather/Vinyl Fil Sticks 35-36 Leather Repair Basecoat Aerosols 36 Leather Repair Toner Aerosols 36 Leather Repair Color Adjuster Aerosols 37 Touch Up Pigment 37 Leather Refinishing 37 Base Coat 37 NOTE: COLORS ARE APPROXIMATE REPRESENTATIONS OF ACTUAL COLORS USING MODERN PROCESS TECHNIQUES.
[Show full text]
Gum Naval Stores: Turpentine and Rosin from Pine Resin
- z NON-WOOD FORESTFOREST PRODUCTSPRODUCTS ~-> 2 Gum naval stores:stores: turpentine and rosinrosin from pinepine resinresin Food and Agriculture Organization of the Unaed Nations N\O\ON- -WOODWOOD FOREST FOREST PRODUCTSPRODUCTS 22 Gum navalnaval stores:stores: turpentine• and rosinrosin from pinepine resinresin J.J.W.J.J.W. Coppen andand G.A.G.A. HoneHone Mi(Mf' NANATURALTURAL RESRESOURCESOURCES INSTITUTEIN STITUTE FFOODOOD ANDAN D AGRICULTUREAGRIC ULTURE ORGANIZATIONORGANIZATION OFOF THETH E UNITEDUNITED NATIONSNATIONS Rome,Rome, 19951995 The designationsdesignations employedemployed andand thethe presentationpresentation of of materialmaterial inin thisthis publication do not imply the expression of any opinionopinion whatsoever onon thethe partpart ofof thethe FoodFood andand AgricultureAgriculture OrganizationOrganization ofof thethe UnitedUnited Nations concernconcerninging thethe legal status of any countrycountry,, territory, city or areaareaorofits or of its auauthorities,thorities, orconcerningor concerning the delimitationdelirnitation of itsits frontiers or boundaries.boundaries. M-37M-37 IISBNSBN 92-5-103684-5 AAllll rights reserved.reserved. No part of this publication may be reproduced, stored in a retrretrievalieval systemsystem,, oror transmitted inin any form or byby anyany means,means, electronic,electronic, mechanimechanicai,cal, photocphotocopyingopying oror otherwise, withoutwithout thethe prior permission ofof the copyright owner. AppApplicationslications forfor such permission,permission, with a statementstatement
[Show full text]
SURROUNDED by PERFECTION Rich Architectural Details, Sculptural Furnishings and Vibrant Contemporary Artwork Define This Luxurious Oceanfront Penthouse in Palm Beach
A painting by acclaimed artist Jamali provides a pop of color on a wall between the dining and living area. Here, a pair of white sofas and an armchair from Holly Hunt by Joseph Jeup, form a social grouping around a custom cocktail table by Rogers Design Group. SURROUNDED BY PERFECTION Rich Architectural Details, Sculptural Furnishings And Vibrant Contemporary Artwork Define This Luxurious Oceanfront Penthouse In Palm Beach INTERIOR DESIGN Lorraine Rogers-Bolton with Amanda Wyant Binns, Rogers Design Group, Palm Beach Gardens, FL BUILDER Bryan Willoughby, Willoughby Construction, Jupiter, FL LANDSCAPE ARCHITECTURE Krent Wieland, Krent Wieland Design, Delray Beach, FL TEXT Charlotte Safavi PHOTOGRAPHY Argonaut Architectural, Jupiter, FL 000 FLORIDA DESIGN VOL. 27 NO. 1 THOUGH IT WAS ONE of the last units to be acquired, this luxurious 27th-floor penthouse in a prestigious building in Palm Beach County, Fla., is by far one of the most spectacular condominiums Bryan Willoughby has ever built. “It’s hard to imagine it was just a raw space when we came on board in 2015,” says Willoughby, who first introduced the owners to interior designer Lorraine Rogers-Bolton. She was very excited to become an integral part of the design team. “We’re not just about furnishings and fixtures,” she says. “But also about selecting materials for the entire condo including the kitchen, wet bar and baths.” With water surrounding the 6,400-square-foot penthouse on three sides — the Atlantic Ocean to the East, the Intracoastal to the West and the Palm Beach inlet to the South — the home’s dazzling backdrop was true blue.
[Show full text]
White Nitrocellulose Lacquer Topcoat
Product Data Sheet 275 VOC Compliant Wood Coating White Nitrocellulose Lacquer Topcoat General Description Available Products The Centurion™ White Nitrocellulose Lacquer is a high quality 275 VOC compliant topcoat formulated for • CS-3108 (Gloss) use in interior finishing. This fast drying and easy to apply topcoat providing excellent hiding, flow, and • CS-3107 (Semi-Gloss) build properties. • CS-3106 (Satin) • CS-3105 (Flat) Physical Properties Vehicle Type Coconut Oil Plasticized /Nitrocellulose Features / Advantages Solids by Volume 19.05 (+/-1%) • Excellent Hardness Solids by Weight 35.21 (+/-1%) • Fast Drying VOC Less than 275 g/l • Self-Sealing • Non-Yellowing Flash Point 0°F Specific Gravity 1.05 Recommended For Viscosity 38-40 sec. Zahn #2 • General Purpose Interior • Interior Doors Application • Kitchen Cabinets Application Method May be sprayed with conventional, airless, and air assisted-airless. • Interior Shutters & Moldings Mixing Instructions Ready to Spray. May be reduced as needed with acetone, retarder, or preferred lacquer thinner. Safety / Clean Up Please read the product Safety Data Substrate Preparation Substrate must be free of grease, oil, dirt, fingerprints, and other Sheet and product label before contamination to ensure optimum adhesion and coatings performance. using product. Clean tools with Remove any loose or peeling paint. Sand basecoat with 320-400 grit acetone. Dispose of any leftover sandpaper. May be applied over acrylic, nitrocellulose and UV Basecoats. materials in accordance with local, Test for adhesion and compatibility before full scale applications. state, or federal regulations. Application Instructions IMPORTANT: Mix well using a power agitator prior to application. Upon application, the temperature of the product, substrate, and coating should be above 50°F.
[Show full text]
TECHNICAL DATA SHEET Transtint® Liquid Dye Concentrate
TECHNICAL DATA SHEET TransTint® Liquid Dye Concentrate Homestead Finishing Products P O Box 360275 Strongsville, OH 44136-0005 Phone: 216-631-5309 www.homesteadfinishingproducts.com Product Description TransTint Dyes are a single component concentrated metallized acid dyestuff dissolved in a glycol ether carrier. The product is designed to be let down with a polar or mildly polar solvent such as water or alcohol and used as a dye stain on bare wood for interior surfaces. It is not suitable for exterior use. It can also be added directly to clear finishing materials to make toners. TransTint is not a finish and must be top coated with a clear finish. TransTint Dyes are suitable for furniture and architectural applications but are not recommended for toys or food preparation surfaces. Advantages TransTints are formulated from light stable metallized acid dyes. They are more lightfast when compared to conventional “aniline” powdered type dye stains. TransTint dyes concentrated formulation allows the user great latitude in using the dye because glycol ethers are compatible with a wide variety of finishing products. The dye can be mixed with either water or alcohol as a bare stain on wood - or added directly to finishing materials like shellac and lacquer to make toners or stains. NOTE: Use of TransTints in certain applications may be restricted in some California Counties. Refer to “VOC Restrictions” on page 5 for more information. Using TransTint Liquid Dyes TransTints represent an innovation in dye technology. This eliminates the waiting for dyes to dissolve, straining as well as solvent guesswork. As a Stain - To use TransTints as a stain for bare wood, stir in the concentrate to either water or alcohol.
[Show full text]
Bulls Eye Sealcoat
Technical Data Bulletin ZINSSER Co., Inc. 173 Belmont Drive, Somerset NJ 08875 ® ™ Bulls Eye SealCoat Universal Sanding Sealer ♦ Compatible with ALL clear finishes, including oil-base and water-base polyurethane, lacquer and shellac ♦ Great sealer for new wood or over existing finishes ♦ Penetrates wood pores deeply, seals wood completely ♦ Apply over new wood or over existing finishes ♦ Ensures uniform penetration of all stains on soft woods ♦ Dries in minutes – can be recoated in less than 1 hour ♦ Sands easily and quickly for smooth results ♦ Clean up with alcohol or ammonia and water Selection Data Application Data Generic Type – 100% dewaxed shellac-base sanding sealer. Surface Preparation – Surfaces must be clean, dry, and It is manufactured using a patented process that guarantees sound. Remove any wax from surface with mineral spirits. long-term stability and shelf-life. The absence of any wax in Sand bare wood as smoothly as possible and remove all SealCoat makes it compatible with all clear finish topcoats sanding dust. Previously applied wood stains must be including oil-base polyurethanes. completely dry. Previously applied finishes must be clean and tightly adhered. Recommended Uses • Doors, trim, baseboards, paneling, wainscoting Application Requirements – Do not thin product when • Cabinets, shelves, furniture, interior shutters using as a sealer or bond/barrier coat. Apply evenly and • Floors, stairs, banisters and spindles consistently and allow to dry 45 minutes before sanding with • May be used to seal wood turnings, figurines, carvings, 120 or finer grit sandpaper. Remove all dust and apply finish wicker, plaster, and other hobby/craft items coat. Note: A second coat of sealer will improve the film build and give added depth to the final finish on porous or open Sanding Sealer - May be used as an undercoat to prepare all grain woods such as oak, mahogany, etc.
[Show full text]