DOCSLIB.ORG

Future-Proof & Proven Reliable Everywhere Sle-GSM-3/4G

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Future-Proof & Proven Reliable Everywhere Sle-GSM-3/4G Napco StarLink3™ Universal 3/4G GSM Radio – Future-Proof & Proven Reliable Everywhere • Phone App for Remote Arm/ ORDERING INFORMATION 3G/4G Universal back-up Disarm any panel brand w/ SLE-GSM-3/4G: 3G/4G Network keyswitch input. Also email/text or primary Compatible GSM Universal Wire- message (option) less Alarm Communicator, SIM card. GSM alarm • Future-Proof Plug-In, Upgrad- Service plan(s) sold separately. No able Communicators - Napco Activation Fee. communicator SLe-Series Radios will continue to SLE-DLCBL: For use with Gemini Pan- conform to_progressions in carrier SLE-GSM-3/4G Features: els only, Napco Up/download cable, networks for your peace of mind, sold separately. • Full event reporting from any and your accounts’ 5G....10G panel, anywhere*, field-proven to SLE-UPGRD-3/4G: 3G/4G Network • Takeover Feature - Easily work virtually anywhere in US, on Field Upgrade Kit, For Use With captures any panel’s existing CS Panels using Contact ID or 4/2. SLe-GSM Universal Wireless Alarm phone number and allows you to • Incredibly affordable enough Communicator THE IDEAL reroute it to another central_sta- to standardize on for primary or tion without going to the panel SLE-REMOTE: Remote App for arm- 2G SUNSET backup reporting on every ing, disarming panel via wireless radio. • Primary or Backup Alarm Com- SOLUTION account (Requires service upgrade). munications –Backup Mode • Cost-Saver Upgrade Program - supervises telco and only sends SLE-DLEXT: Optional, for up/down- Upgrade to StarLink3 from GSM reports when it’s not loading, extends distance from radio Competitive 2G Radios at functioning to panel, from 10’, up to 100 ft. www.napcosecurity.com/contact/ • Includes AT&T SIM card and dual A606: Free Trifold Enduser Brochure StarLink4GUpgrade band high-efficiency antenna for new and existing accounts. State- • Easiest 4-Wire Installation & ment Stuffer or Self-Mailer • Optional Smart Charger Module Activation - Just Enter a Radio ID for use when panel aux power is SLE-SMTCHG: Optional, Smart we do the rest - with Dialer at a premium and/or for optimized Charge Module. Allows for optimal Capture ( no entering phones nos., radio mounting locations up to radio position regardless of available formats, account nos.) 100’ from the panel (Module AC outlets. Also ideal where auxiliary • Reports to any Central Station. maybe used with or without its (fire) standby power is too low - with- NO special equipment. own 4AH/12V battery). out requiring a separate power supply. NO activation fee. Uses standard 4AH/12V rechargeable iRemote • Bonus: Full High-Speed Napco battery. Panel remote uploading/ down- SLE-CDMA-FIRE: Sole Path Fire loading (Requires sep. cable.) Alarm Cellular Communicator (Red), model similar to above. SLE-GSM-3/4G Original 3G/4G Don’t let your Don’t let your security get security get GSM Model StarLink Radio on GSM hung up on hung up on Like a smart, advanced technology some old some old phone. Network cellphone, StarLinkThere’s nothingtransmits more your important than phone. security system’s high priority signals raditional telephone the safety & security of home and wirelessly, digitally and dependably. land lines are quickly family. That’s why security systems And, it can work on any alarm system are an important investment in becoming a thing of and virtually anywhere too. Any Brand Alarm Panel withThere’s Starlink nothing more important than SLE-GSM-FIRE StarLink Sole Path Fire peace of mind, especially in turbu- My Home My Home T the safety & security of home and Notifications the past. They’re prone to lent economic times. But, a security Don’t get hung up on telephone family. That’s why security systems storm outages. They can system is as good as its weakest link, lines & technicalities. Protect your are an important investment in Communicator (Red) on 3G/4G GSM cut by would-be thieves. which is often the telephone line it family with the ultimatesecurity in … advanced insist on peace of mind, especially in turbu- communicates vital alarm reports Often they’re just an affordable StarLink lent economic times. But, a security TIMES HAVE CHANGED: out on, to get you help. TIMES HAVE CHANGED: system is as good as its weakest link, avoidable expense, by Napco, a leader You don’t need a land line phone to have Network You don’t need a land line phone to have a security system. New! since most in innovative security Cellular Networkwhich is often the telephone line it a security system. Doesn’t matter if your telephone lines are system technology for communicates vital alarm reports Doesn’t matter if your telephone lines are cut, interrupted by storm or discontinued households are cut, interrupted by storm or discontinued over three decades. out on, to get you help. You just need to reliably communicate You just need to reliably communicate already using Ask your security alarms to get you help in an emergency alarms to get you help in an emergency cell phones and professional today. internet-based VOIP/cable STATUS: DISARMED™ STATUS: ARMED phone services. Central Station StarLink StarLink™ That’s why Text or Email It’s the most It’s the most PRESS TO PRESS TO today there’s affordable, affordable, reliable, the StarLink Alarm reliable, ARMwireless alarm DISARM Communicator, because wireless alarm communications your security is too communications service your service your important to risk. security dealer security dealer can offer. Emergency Services can offer. StarLink simply takes the place of, or just backs-up, failed phone lines, to communicate your alarm system sig- nals to the alarm monitoring station, ”StarLink” is a trademark of NAPCO Security Technologies,Inc. A606 so authorities are dispatched to your emergency quickly and effectively. ” Free Sales Trifold Mailers for New & Existing Accounts (Part No. A606) Now Extended StarLink Series with CDMA and Fire Radio Models App "My Home StarLink" App available for Android and iPhone/iPad. SLe-GSM-3/4G SLe-GSM Series Future-Proof Universal Cellular Communicator - 3G/4G RADIO COMMUNICATIONS • NOC automatically enrolls radio into system on first alarm transmis- • Full event alarm reporting over the sion – No website setup required GPRS radio network (GSM Packet Radio • NOC website access allows complete management and modifica- Service) for both new and retrofit instal- tion of alarm routing and reporting, if desired. lations • NOC provides: GSM radio supervision; Alarm reports to • Universal use - Not just for NAPCO con- the central station; Text Message/SMS/Email alerts trol panels, but reports full-data alarms • Real time status monitoring of all radio accounts (e.g., online, offline, for any brand competitive control panel check-in, signal strength level, trouble conditions, low battery/volt- to any Central Station age input). • Full high-speed control panel upload/ download supported on Gemini™ SPECIFICATIONS P816/1632/1664 and P9600/3200/X255 • Dimensions: 5-3/8”x 7-7/8”x 1-7/8” (HxWxD) series panels. (Note: Requires cable; • Weight: 13.5 oz. #SLE-DLCBL). • Electrical Ratings for +12V (all models powered by the control • Future-Proof, Field-Upgradable Commu- panel) nication Technology - SLE-GSM Series are the only alarm communi- cators in the category field upgradable, allowing them to adapt to • Input Voltage: 11-15VDC progressions in network technology. As cell carrier networks change • Input Current: 65mA with peak RF transmission current of to 4G to 6G……and so forth, a dealer can simply update a StarLink™ 400mA; (80mA with peak RF transmission current of 400mA for Future-Proof Radio to the prevailing xG-Network by replacing the model SLe-GSM-8D-3/4G) plug-in radio module. There will never be a need to replace the • Electrical Ratings for the IN 1 Burg/Fire Input: entire radio to move to the latest technology! • Provides Primary and Backup Mode reporting - jumper selectable • Input Voltage: 9-15VDC Maximum Input Current: Up to 2mA from FACP NAC circuit – Primary mode - radio provides Tip and Ring line feed voltage to the control panel and reports all panel alarms via GPRS radio. • Electrical Ratings for IN 2 and IN 3: – Backup mode - radio detects when the premise’s Telco line is • Maximum Loop Voltage: 15VDC Maximum Loop Current: cut or panel can’t get thru to Central Station & only reports via 1.2mA GPRS radio in those instances • End of Line Resistor (EOLR) Value: 10K • Full event reporting in Contact ID and 4/2 format • Electrical Ratings for 3 PGM Outputs: SECURITY/EASE OF INSTALLATION • Open Collector Outputs: Maximum Voltage 3V when active; • Encrypted alarm and upload/download packets 15V maximum when not active • 3 Status LED Indicators (visible with the wiring cover installed): • Maximum PGM Sink Current: 50mA (1) Green - Signal strength; (2) Amber- Radio busy/activation; iRemote (3) Red- Trouble • Operating Temperature: 0 to 49˚ C • Tamper • Dual band antenna, for North America, 2dBi+ gain MY HOME STARLINK APP: • Radio can also be placed up to 100 feet from the control panel for best antenna location (Also, new optional high-performance remote • Easy single-button security antenna, see ordering info.) system arm/disarm control for My Home accounts • Built in power supply uses Alarm Panel Aux power as power source • Provides status update so • Optional Smart Charge Module also available- Ideal where aux. (fire) accounts see alarm status standby power is too low -- without requiring a separate power sup- before and after arming or ply. Uses 4AH/12V battery. STATUS: DISARMED My Home disarming command PRESS TO ARM COMPLIANCES: UL 864, 9TH ED., UL1610, UL985, UL1023, UL1635 • App is downloadable from iTunes or Google Market for NAPCO’S UL-COMPLIANT NETWORK OPERATIONS CENTER (NOC) iPhone/iPad/Droids. • Field-Proven, Signal-Boost™ Technology, throughout the commu- • Makes a great demo on your STATUS: ARMED nication transmission & reception, i.e., at both the radio and the PRESS TO smartphone to sell prospec- DISARM Network Operations Center, super-amplifies alarm signals and wave tive customers StarLink remote shapes for unprecedented reliability even in remote/fringe areas, for control capability the ultimate in alarm industry emergency communications.
Load more

Recommended publications
  • 3G/UMTS an Evolutionary Path to Next Generation Networks
    3G/UMTS An evolutionary path to Next Generation Networks ITU/BDT Regional Seminar on Fixed Mobile Convergence and Guidelines on the smooth transition of existing mobile networks to IMT-2000 for Developing Countries for Africa Jean-Pierre Bienaimé …………………………………………………………………………… Chairman, UMTS Forum www.umts-forum.org ITU/BDT Regional Seminar Nairobi 9-12 May 2005 Summary • What is the UMTS Forum? • What is the global status of 3G/UMTS launches? • What terminals, services and tariffs are available? • 3G/UMTS evolution from launch through to Release 6 • A look to the future • Viewpoint on spectrum • Lessons learned in Europe ITU/BDT Regional Seminar Nairobi 9-12 May 2005 1 About The UMTS Forum Who are we? An international, cross-sector industry body comprising operators, manufacturers, regulators, application developers, research organisations and IT industry players. Our mission… To promote a common vision of the development of 3G/UMTS and of its evolutions, and to ensure its worldwide commercial success. Our publications Since 1997, more than 40 reports on Spectrum & Regulation, 3G/UMTS vision, Customer behaviour, Market evolution & Forecasts, Technical studies & Implementation. Recent issues: Strategic Considerations for IMS – the 3G Evolution, Coverage Extension Bands for UMTS/IMT-2000 in the bands between 470-600 MHz, Magic Mobile Future 2010-2020… ITU/BDT Regional Seminar Nairobi 9-12 May 2005 UMTS Forum Key Areas of Activity in 2005 Spectrum & Regulation Studies and contributions on harmonisation of global spectrum and additional
    [Show full text]
  • Difference Between GSM, GPRS, EDGE, 3G, WCDMA, HSDPA and 4G
    Difference between GSM, GPRS, EDGE, 3G, WCDMA, HSDPA and 4G It's a very basic and non-technical comparison. GSM GSM, stands for Global Systems for Mobile Communications, is basic standard bearer of 2G technologies. It is mainly used in mobile communication. Short Messaging System (SMS) was introduced into GSM networks along with capability to download content from various service providers. The content could ring tone, logos and picture messages. It can support Voice telephony and data however the data rate is only 9.6Kb/s, that is very low bit rate for date communication. GPRS GPRS, stands for General Packet Radio Service, is used to give higher data speed over GSM. It is not the replacement of GSM. It is just an extension to the older GSM technology to gain faster speed. Multimedia Messaging System or MMS is the feature of GPRS. It allowed subscribers to send videos, pictures, or sound clips to each other just like text messages. GPRS also provided mobile handset the ability to surf the Internet at dial-up speeds through WAP enabled sites. GPRS offers higher bit rate (Up to 171kb/s) by usage of A packet-linked technology over GSM. EDGE EDGE stands for Enhanced Data Rates for GSM Evolution. This technology, also termed as Enhanced GPRS. This is a technology that uses the same equipment as GSM with only a few minor modifications to provide faster data speeds and is often regarded as a stepping stone towards 3G thus it is called 2.5G. EDGE gives the users the inimitable chance to increase the throughput capacity and the data speed at least 3 to 4 times higher to what GPRS offers.
    [Show full text]
  • 4G to 5G Networks and Standard Releases
    4G to 5G networks and standard releases CoE Training on Traffic engineering and advanced wireless network planning Sami TABBANE 30 September -03 October 2019 Bangkok, Thailand 1 Objectives Provide an overview of various technologies and standards of 4G and future 5G 2 Agenda I. 4G and LTE networks II. LTE Release 10 to 14 III. 5G 3 Agenda I. 4G and LTE networks 4 LTE/SAE 1. 4G motivations 5 Introduction . Geneva, 18 January 2012 – Specifications for next-generation mobile technologies – IMT-Advanced – agreed at the ITU Radiocommunications Assembly in Geneva. ITU determined that "LTELTELTE----AdvancedAdvancedAdvanced" and "WirelessMANWirelessMANWirelessMAN----AdvancedAdvancedAdvanced" should be accorded the official designation of IMTIMT----AdvancedAdvanced : . Wireless MANMAN- ---AdvancedAdvancedAdvanced:::: Mobile WiMax 2, or IEEE 802. 16m; . 3GPPLTE AdvancedAdvanced: LTE Release 10, supporting both paired Frequency Division Duplex (FDD) and unpaired Time Division Duplex (TDD) spectrum. 6 Needs for IMT-Advanced systems Need for higher data rates and greater spectral efficiency Need for a Packet Switched only optimized system Use of licensed frequencies to guarantee quality of services Always-on experience (reduce control plane latency significantly and reduce round trip delay) Need for cheaper infrastructure Simplify architecture of all network elements 7 Impact and requirements on LTE characteristics Architecture (flat) Frequencies (flexibility) Bitrates (higher) Latencies (lower) Cooperation with other technologies (all 3GPP and
    [Show full text]
  • A Survey on Mobile Wireless Networks Nirmal Lourdh Rayan, Chaitanya Krishna
    International Journal of Scientific & Engineering Research, Volume 5, Issue 1, January-2014 685 ISSN 2229-5518 A Survey on Mobile Wireless Networks Nirmal Lourdh Rayan, Chaitanya Krishna Abstract— Wireless communication is a transfer of data without using wired environment. The distance may be short (Television) or long (radio transmission). The term wireless will be used by cellular telephones, PDA’s etc. In this paper we will concentrate on the evolution of various generations of wireless network. Index Terms— Wireless, Radio Transmission, Mobile Network, Generations, Communication. —————————— —————————— 1 INTRODUCTION (TECHNOLOGY) er frequency of about 160MHz and up as it is transmitted be- tween radio antennas. The technique used for this is FDMA. In IRELESS telephone started with what you might call W terms of overall connection quality, 1G has low capacity, poor 0G if you can remember back that far. Just after the World War voice links, unreliable handoff, and no security since voice 2 mobile telephone service became available. In those days, calls were played back in radio antennas, making these calls you had a mobile operator to set up the calls and there were persuadable to unwanted monitoring by 3rd parties. First Gen- only a Few channels were available. 0G refers to radio tele- eration did maintain a few benefits over second generation. In phones that some had in cars before the advent of mobiles. comparison to 1G's AS (analog signals), 2G’s DS (digital sig- Mobile radio telephone systems preceded modern cellular nals) are very Similar on proximity and location. If a second mobile telephone technology. So they were the foregoer of the generation handset made a call far away from a cell tower, the first generation of cellular telephones, these systems are called DS (digital signal) may not be strong enough to reach the tow- 0G (zero generation) itself, and other basic ancillary data such er.
    [Show full text]
  • HD Voice Annex C Minimum Requirements with GSM/UMTS/LTE
    GSM Association Non-Confidential Minimum Technical Requirements for use of the HD Voice Logo with GSM/UMTS/LTE issued by GSMA Minimum Technical Requirements for use of the HD Voice Logo with GSM/UMTS/LTE issued by GSMA Version 1.1 22nd March 2013 Security Classification – NON CONFIDENTIAL GSMA MATERIAL Copyright Notice Copyright © 2013 GSM Association. Antitrust Notice The information contain herein is in full compliance with the GSM Association’s antitrust compliance policy. Version 1.1 Page 1 of 18 GSM Association Non-Confidential Minimum Technical Requirements for use of the HD Voice Logo with GSM/UMTS/LTE issued by GSMA Table of Contents INTRODUCTION ..................................................................................................................... 3 ANNEX C: MINIMUM REQUIREMENTS FOR MOBILE NETWORKS AND TERMINALS FOR THE USAGE OF THE ‘HD VOICE’ LOGO WITH GSM/UMTS/LTE............................................................................................................... 3 DOCUMENT MANAGEMENT ............................................................................................... 18 Document History .................................................................................................................. 18 Other Information ................................................................................................................... 18 Version 1.1 Page 2 of 18 GSM Association Non-Confidential Minimum Technical Requirements for use of the HD Voice Logo with GSM/UMTS/LTE issued by GSMA INTRODUCTION
    [Show full text]
  • AT&T 3G Sunset
    Product Change Notification AT&T 3G Sunset - Impacts on 4G Devices LTE Category 1, Category 3 and Select Category 4 Models Date: March 9, 2021 I. Product Change Notification Number (PCN) PCN 03092021-02 II. Overview The purpose of this PCN is to avoid service interruption for certain MultiTech 4G products impacted by the impending AT&T 3G network sunset. 4G/LTE Category 1, 3 and 4 devices in the U.S. may no longer attach to the AT&T network after their 3G network sunset, scheduled for late February 2022. Voice-capable cellular modules integrated into several MultiTech products are configured for voice-centric signaling by default. These devices are likely to arrive at a No Service condition after 3G sunset -- even for data-only applications. This is a result of the module requiring a voice signal to connect to networks configured to leverage a combined attach (3G and LTE) for LTE device registration. The MultiTech products detailed in this PCN will be impacted by the 3G sunset. A software configuration change in the cellular module in these products is required in order to avoid a No Service condition. The only exception is for products with cellular modules supporting the IMS service Voice over LTE (VoLTE) and an accompanying VoLTE subscription from your service provider. MultiTech will immediately implement a software configuration change in our manufacturing process to include the required AT command to set a new permanent module default for its User Equipment (“UE”) settings. Note: future module firmware updates may impact this setting. Current default: CEMODE=1 (Voice centric) New default: CEMODE=2 (Data centric) For devices already deployed in the field, you must implement the above mentioned software- configuration change in each device to ensure continued service following the 3G sunset.
    [Show full text]
  • Skywire​®​ Development Kit SMS Example
    ® Skywire ​ Development Kit SMS ​ Example NimbeLink Corp Updated: August 2019 PN 30049 rev 14 NimbeLink Corp. All Rights Reserved. 1 Table of Contents Table of Contents 2 1. Introduction 3 1.1 Orderable Part Numbers 3 1.2 Prerequisites 4 2. SMS Message 5 2.1 Send SMS Message 5 2.2 Receive SMS Messages 5 2.3 Delete Received SMS Messages 6 3. Troubleshooting 7 PN 30049 rev 14 NimbeLink Corp. All Rights Reserved. 2 1. Introduction 1.1 Orderable Part Numbers Orderable Device Description Carrier Network Type NL-SWDK Skywire Development Kit Any Any NL-SW-1xRTT-A 2G 1xRTT Aeris CDMA NL-SW-1xRTT-S 2G 1xRTT Sprint CDMA NL-SW-1xRTT-V 2G 1xRTT Verizon CDMA Any GSM (AT&T, NL-SW-GPRS 2G GPRS GSM T-Mobile, etc.) NL-SW-EVDO-A 3G EVDO, GPS, GLONASS Aeris CDMA NL-SW-EVDO-V 3G EVDO, GPS, GLONASS Verizon CDMA Any GSM (AT&T, NL-SW-HSPA 3G HSPA+, GPS, GLONASS GSM T-Mobile, etc.) Any GSM (AT&T, NL-SW-HSPA-B 3G HSPA+, GPS, GLONASS GSM T-Mobile, etc.) NL-SW-LTE-TSVG LTE CAT 3 without Fallback, GPS, GLONASS Verizon LTE NL-SW-LTE-TSVG-B LTE CAT 3 without Fallback, GPS, GLONASS Verizon LTE Any GSM (AT&T, NL-SW-LTE-TNAG LTE CAT 3 with HSPA+ Fallback, GPS, GLONASS LTE, GSM T-Mobile, etc.) Any GSM (AT&T, NL-SW-LTE-TNAG-B LTE CAT 3 with HSPA+ Fallback, GPS, GLONASS LTE, GSM T-Mobile, etc.) LTE CAT 3 with HSPA+ Fallback, GPS, GLONASS, NL-SW-LTE-TEUG Any EU GSM LTE, GSM EU NL-SW-LTE-S7618RD LTE CAT1 Verizon LTE NL-SW-LTE-S7648 LTE CAT1 AT&T/T-Mobile LTE NL-SW-LTE-S7588-V LTE CAT4 with HSPA+ Fallback Verizon LTE NL-SW-LTE-S7588-V-B LTE CAT4 with HSPA+ Fallback Verizon LTE NL-SW-UAV-S7588 LTE CAT4 with HSPA+ Fallback Verizon LTE NL-SW-LTE-S7588-T LTE CAT4 with HSPA+ Fallback AT&T LTE, GSM NL-SW-LTE-S7588-T-C LTE CAT4 with HSPA+ Fallback AT&T LTE, GSM Any GSM (AT&T, NL-SW-LTE-WM14 CAT1 LTE, GSM GSM T-Mobile, etc.) NL-SW-LTE-SVZM20 LTE CAT M1 Verizon LTE NL-SW-LTE-TC4NAG LTE CAT4 Verizon/AT&T LTE NL-SW-LTE-TC4EU LTE CAT 4 EU European Carriers LTE PN 30049 rev 14 NimbeLink Corp.
    [Show full text]
  • CDMA2000 – a New Challenge for 3G Mobile Radio Testers
    MOBILE RADIO Radiocommunication testers Universal Radio Communication Tester R&S CMU200 CDMA2000 – a new challenge for 3G mobile radio testers The CDMA world is facing its next The CDMA2000 market 120 100 decisive step: the introduction of Since the launch of the first commercial 80 cdmaOne network in Hong Kong in 60 CDMA2000 1X, handling packet data September 1995, CDMA has established 40 itself worldwide as a mobile radio Subscribers (millions) 20 rates of up to 307.2 kbit/s. The standard. It has advanced triumphantly 0 far beyond the USA, its country of origin, Jun. 98 Jun. 99 Jun. 00 Jun. 01 future-oriented measurement platform Korea and Japan. With rocketing growth Dec. 97 Dec. 98 Dec. 99 Dec. 00 Dec. 01 rates, CDMA ranks besides GSM as a Universal Radio Communication Tester major digital standard of the second FIG 1 Development of cdmaOne/CDMA2000 subscriber figures generation. Now the CDMA world is R&S CMU200 also supports this third- entering a new and decisive phase, the introduction of CDMA2000 1X, which is generation mobile radio standard. capable of working with packet data rates of up to 307.2 kbit/s. in Korea and Japan is almost saturated, the highest growth rates have lately In recent years, cdmaOne has expanded come from North and South America, tremendously fast. In April 1998, there and a large market is emerging in were around ten million subscribers China. The network operator China worldwide, but now more than Unicom is presently setting up a 100 million customers make their calls cdmaOne/CDMA2000 network, with through CDMA networks (FIG 1).
    [Show full text]
  • Performance of International Roaming Location Update in 3G and 4G Networks
    Performance of International roaming Location Update in 3G and 4G networks Contact Information: Sanaz Moshirian Author(s): Sanaz Moshirian E-mail: [email protected] E-mail: [email protected] External advisor(s): Anders Högsell Hi3G Access AB Address: Lindhagensgatan 98, 112 51 Stockholm, Sweden Phone: +46735333333 University advisor(s): Dr.Patrik Arlos Department of Communication systems Internet : www.bth.se School of Computing Faculty of Computing Phone : +46 455 38 50 00 Blekinge Institute of Technology Blekinge Institute of Technology Fax : +46 455 38 50 57 371 79 Karlskrona Sweden Faculty ABSTRACT Since Mobile network operator (MNO) relies on many Business Support Systems (BSS) and Operation Support Systems (OSS) it should be assured that operator’s systems supports the requirements of the future. This thesis shall focus on the “start-to-end” aspects that must be considered to ensure that International Roaming continues to operate flawless. The thesis experience Long Term Evolution (LTE) in case of international roaming by measuring the end to end location update delay. In order to evaluate the LTE performance of international roaming, the delay time has been measured by the means of tracing tools for several different international roamers and the results has been compared with the results achieved for local user. The outcome has been compared with the respecting results in 3G network the statistical results has been provided and the graphs has been plotted to study the performance. Based on the results obtain on this thesis, it has been concluded that local user acts more stable to get attach to the network, i.e.
    [Show full text]
  • Guide to Improving Mobile Signal
    IMPROVING MOBILE SIGNAL Introduction The purpose of this guide is to educate consumers on ways to improve their mobile signal and also find the causes of their poor signal. One of the biggest complaints mobile users make is having poor signal. Not being able to make a call, missing calls and having slow internet speeds is often very frustrating. For businesses not being able to receive calls can mean revenue loss and upset customers. Never fear there is a solution to improving your signal and within this guide I will explain the many ways you can improve your signal and stay connected. Page 1 ‐ www.mobilenetworkguide.com.au Contents Introduction 1 Contents 2 Mobile Phone Networks How Do They Work 3 Base Station Types 3 Cell Coverage 4 Mobile Black Spots 4 How Signal Effects Calls, SMS and Data 4 Lower Mobile Frequencies Offer the Best Range 5 Causes of Poor Mobile Reception Distance from the Tower 6 Physical Obstructions 6 Building Structures 6 Interference 7 Network Issues 7 Network Congestion 7 Coverage Checkers 7 How to Locate a Mobile Base Station 8 How to Measure Mobile Signal Signal Bars 9 Exact Readings 10 Field Test, Service & Engineering Modes 11 Apps That Measure Signal Strength 12 Solutions to Improve Mobile Signal Antennas 13 Passive Repeater 14 Smart Repeater 15 Femtocell 15 Changing Mobile Providers 16 Purchase a New Mobile Device 16 Contact Your Mobile Provider 16 Carrier Solutions 17 Further Information 17 Page 2 ‐ www.mobilenetworkguide.com.au Mobile Phone Networks How Do They Work? A mobile phone network or cellular phone network as it is also known, is made up of a large number of signal areas called cells.
    [Show full text]
  • XP5 Push-To-Talk General English
    Push–to–Talk – General What is Enhanced Push-to-talk (EPTT)? Enhanced Push-to-talk (EPTT) is a special feature on a mobile phone that combines the functionality of a walkie-talkie or 2-way radio with the normal handset features. It provides simple communication to a group of people with just a press of a button. It allows the customer to instantly reach other EPTT contacts by eliminating the dialing and ringing steps in a regular cellular call. EPTT calls can be made to one person or to a group of people. It is also referred to as Push to Talk over Cellular (PoC) How does EPTT work? EPTT is based on half-duplex communication (ability to speak over the same channel but not at the same time). It uses Voice over internet protocol (VoIP). The person, who talks, keeps the EPTT button pressed, while others can only listen. Thereafter the speaker releases the EPTT button, and the next speaker presses the button and starts talking. An EPTT call will end when the caller ends the call. However, other speakers of the group can end their call session, any time. Is EPTT number different from my mobile number? No, the EPTT phone number is the same as your 10 digit mobile number. But this number should be provisioned by the operator for EPTT to work. Can I make/receive an EPTT call without using the speaker phone? EPTT calls are generally started over the speaker phone but can be changed to the earpiece at any time. You can listen to EPTT calls through your phone’s speaker or earpiece.
    [Show full text]
  • Mobile TV Technologies Zahid Ghadialy March 2006
    Mobile TV Technologies Zahid Ghadialy March 2006 © 2006 Zahid Ghadialy What is Mobile TV Mobile TV Broadcasting allows the user to watch their favourite TV programs such as dramas, news, music, sports and documentaries on their mobile device. The service works by receiving a specialised digital TV broadcast signal from the air in much the same way as televisions at home will do in future. Channel guides will also be broadcast allowing users to keep abreast of the latest programs on air. It is not the same as a streaming video service over 3G or GPRS, but one which is optimised for longer period TV viewing by large numbers of simultaneous users with high picture quality and low battery power consumption. Mobile TV Technologies BCMCS: BroadCast MultiCast Services (3GPP2) DVB-H: Digital Video Braodcasting-Handheld (ETSI) ISDB-T: Integrated Service Digital Broadcasting – Terrestrial (ARIB) T-DMB: Terrestrial Digital Multimedia Broadcasting (Korean Standard) MediaFLO: Media Forward Link Only (Qualcomm proprietary) MBMS is not Mobile TV MBMS uses existing 3G Spectrum whereas Mobile TV needs new frequency spectrum Channel switching is faster using Mobile TV technologies compared to MBMS Very little number of channels using MBMS are possible as compared to Mobile TV technologies Battery life is much less if MBMS is used as compared to Mobile TV technologies Higher coverage possible with Mobile TV technologies Mobile TV Technologies In Depth Analysis Qualcomm has pulled together The FLO Forum, (Forward Link Only) which is pushing to standardize this Qualcomm’s technology for transmitting multimedia content to mobile devices. MediaFLO Qualcomm proprietary It uses unidirectional COFDM (Coded Orthogonal Frequency Division Multiplexing) Its under the process of standardisation Interested parties include LG, Sanyo, Sharp, Huawei In US, MediaFLO will deliver 29 channels on TV channel 55.
    [Show full text]