DOCSLIB.ORG

CENTRAL MACHINE, INC. INSPECTION: Wednesday, May 26, 1819 Brooks Avenue 9:00 A.M

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
CENTRAL MACHINE, INC. INSPECTION: Wednesday, May 26, 1819 Brooks Avenue 9:00 A.M AUCTION CNC & MANUAL HOLLOW SPINDLE THREADING & VERTICAL MACHINING FACILITY Featuring: Hollow Spindle & Gap Bed Engine Lathes; 4-Axis CNC Vert. Machining Center, CNC & Manual Mills, Radial Arm Drill, Hyd. Surface Grinder, Horiz. Shaper, Vertical Slotter, Misc. Machinery, Tooling, Hardened & Ground Lead & Taper Gauges, Precision Instruments, Air Compressor, Welding Equip., Large Assortment of Pipe Handling Equip., Pedestal Jib Cranes, Forklifts, More! < MAZAK 12-1/2" HOLLOW SPINDLE LATHE 2008 SULLAIR 30 HP ROTARY SCREW AIR COMPRESSOR THURSDAY, MAY 27 At the Premises of 10:00 A.M. CENTRAL MACHINE, INC. INSPECTION: Wednesday, May 26, 1819 Brooks Avenue 9:00 A.M. to 4:00 P.M. & Morning of Sale ROSENBERG (Houston Area), TEXAS 77471 BUYER’S PREMIUM: 12% ONSITE (See Directions on Back Page) 15% VIA WEBCAST CNC HANKOOK 7-1/4" HOLLOW SPINDLE LATHE SUPERMAX MAX-8 VERTICAL MACHINING CENTER – 4-AXIS Read Terms & Conditions on Back Page On-Site Bidding in Rosenburg, Texas or Bid Via Webcast at of Brochure Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 BOB BRAMAN TX LIC #6362 • RON MOORE TX LIC #7314 E-MAIL: [email protected] HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com HOLLOW SPINDLE LATHES MAZAK 30" X 120", 31" actual sw. over bed, approx. 23" sw. over crosslide, 12-1/2" spndl. hole, spndl. spds.: 5–300 RPM, front and rear 24" dia. hollow spndl. chucks, inch/metric thdng., taper attach., pwr. rapid traverse, remote spndl. opera- tion, Newall 2-axis D.R.O., (2) roller jaw steadyrests, S/N 49983W. HANKOOK PROTEC 28" X 120", new 1994, 28" sw. over bed, approx. 20" sw. over crosslide, 7-1/4" spndl. hole, spds.: 20– 900 RPM, front and rear mtd. 21" dia. 4-jaw chucks, inch/ metric thdng., taper attach., pwr. rapid traverse, (2) roller jaw steadyrests, S/N R94-03- 0. MAZAK 12-1/2" HOLLOW SPINDLE LATHE GAP BED ENGINE LATHES HANKOOK PROTEC 28" X 157", new 1989, 27.95" sw. over bed, approx. 22" sw. over crosslide, 4-7/8" spndl. bore, 15" length of gap, 38" approx. in gap, spds.: 28–1,250 RPM, inch/metric thdng., pwr. rapid traverse w/joystick control, roller jaw steadyrest, taper at- tachs., 19-1/2" 4-jaw chuck, S/N R89-05-06. KINGSTON 22" X 120", new 1994, Mdl. HD22120, 22-1/2" sw. over bed, approx. 17" sw. over crosslide, 15" length of gap, approx. 30" swing in gap, spndl. spds.: 13–1,200 RPM, 4-1/4" spndl. hole, 6-jaw adjust through chuck, inch/metric thdg., taper attach., roller jaw steadyrest, longitudinal Trav-A- Dial, S/N N.A. HANKOOK 7-1/4" HOLLOW SPINDLE LATHE HANKOOK 28"/38" X 157" GAP BED ENGINE LATHE KINGSTON 22"/30" X 120" GAP BED ENGINE LATHE At the Premises of AUCTION CENTRAL MACHINE, INC. 1819 Brooks Ave., ROSENBERG (Houston Area), TX 77471 THURSDAY, MAY 27 • 10:00 A.M. (See Directions on Back Page) CNC CNC SUPERMAX MAX-8 VERTICAL MACHINING CENTER – 4-AXIS SUPERMAX 2-AXIS CNC MILLING MACHINE KINGSTON 4' X 9" RADIAL ARM DRILL 4-AXIS CNC VERTICAL MACHINING CENTER RADIAL ARM DRILL SUPERMAX MDL. MAX 8, new 1995, Fanuc OM CNC 4-axis control, 26" x 67" tbl., 4,400 max. tbl. KINGSTON 4' X 9", new 1995, Mdl. KR1000S, #4 MT spndl., load cap., 65" X-axis, 27.55" Y-axis, 27.55" Z-axis travels, 7.87" to 35.4" dist. spndl. nose to tbl. spds.: 44–1,500 RPM, 3 HP main drive motor, pwr. eleva- surface, BT-50 taper, spndl. spds.: 45–4,000 RPM, 15 KW main spndl. motor, 30 pos. ATC, tion, plain box tbl., S/N 951053. Kitagawa Mdl. TA400 20" vert. mtd. 4th axis tbl., 19-1/2" dia. 4-jaw chuck, 6-3/8" spndl. through hole, tailstock, 110" steel 4th axis base mount for extended length parts, S/N 512081. HYDRAULIC SURFACE GRINDER SELECTION OF APPROX. (100) CAT-50 HEAVY DUTY MACHINING CENTER TOOLHOLDERS, BROWN & SHARP NO. 5, 6" x 18", belt driven spndl., exter- including std. and extended length collet style, endmill, taper shank, facemill, and others. nal coolant pump, S/N N.A. CNC MILLING MACHINE PLAIN HORIZONTAL HYD. SHAPER SUPERMAX MDL. YCM40, new 1995, Supermax CNC20 2-axis programmable control system, 9" ROCKFORD 28", 15" x 19" tilting tbl., hyd. tool lift, 10 HP x 49" tbl., R8 spndl. taper, variable spds.: 60–4,200 RPM, 2 HP spndl. drive motor, S/N 504692. hyd. drive system, S/N N.A. MILLING MACHINES VERTICAL SLOTTING MACHINES CINCINNATI NO. 3 PLAIN HORIZONTAL, 15-1/4" x 62-1/2" tbl., NS50 NST spndl. taper, spds.: ROCKFORD HYDRAULIC 12", 24" dia. rotary tbl. w/dividing 18–1,300 RPM, rear controls, Newall 2-axis D.R.O., S/N 4A3P5A-10. attach., 7-1/8" bore hole, internal hyd. system w/7-1/2 HP BRIDGEPORT MDL. J VERTICAL TURRET, 9" x 42" tbl., spds.: 80–2,720 RPM, longitudinal pwr. pump, S/N 52-S0-23. feed, Bridgeport Mdl. M milling head on rear ram, (2) Bridgeport right angle milling attachs., 7" PRATT & WHITNEY 6", Mdl. B, 19-3/4" built-in rotary tbl., riser block, S/N 31076. spds.: 33–116 SPM, S/N 199. CINCINNATI HORIZONTAL MILLING MACHINE ROCKFORD PLAIN HYD. SHAPER PRATT & WHITNEY VERTICAL SLOTTER INSPECTION: Wednesday, May 26, 9:00 A.M. to 4:00 P.M. & Morning of Sale < ROCKFORD VERTICAL SLOTTER > PEERLESS HORIZONTAL BANDSAW ASSORTED PRECISION INSTRUMENTS MISCELLANEOUS MACHINERY HARDENED & GROUND LEAD & TAPER GAUGES PEERLESS MDL. HB-1118U HORIZONTAL BANDSAW, 11" rd. WIDE ARRAY OF PIN AND BOX GAUGES FOR OILFIELD THREADS–from 3/4" up to cap., 11" x 18" rect. cap., 1" dia. blade, 2 HP drive motor, coolant 8-5/8", manufactured by Hemco & Lone Star Gauges; ROTARY SHOULDER CONNEC- base, infeed/outfeed H.D. roller conveyors, S/N N.A. TION GAUGES; TUBING GAUGES; DIAL TYPE BORE GAUGES; MICROMETER STYLE BORE GAUGES; SEVERAL GAGEMAKER DIAL TYPE BORE GAUGES. BROWN & SHARP NO. 5 HYDRAULIC SURFACE GRINDER, 6" x 18", belt driven spndl., external coolant pump, S/N N.A. PRECISION INSTRUMENTS CUSTOM APPROX. 75 T. CAP. H-FRAME HYDRAULIC PRESS, 43-1/4" VERNIER CALIPERS up to 36"; MICROMETER SETS from 1" to 12"; INDIVIDUAL MI- dist. btn. uprights, adj. height bed, 1 HP elec. drive hyd. system. CROMETERS up to 24"; ROCKWELL MDL. 3JR HARDNESS TESTER; END LENGTH MEASURING GAUGES. (2) BALDOR 1 HP PEDESTAL GRINDERS on fabricated stand. MACHINE SHOP ACCESSORIES PERISHABLE TOOLING 12" HORIZONTAL/VERTICAL ROTARY TABLE w/12" dia. 3-jaw surface mount chuck; LARGE SELECTION OF MORSE TAPER AND STRAIGHT SHANK L&W 8" SUPER SPACER INDEXER; ASSORTED BORING HEADS; R8 COLLETS; YUASA DRILLS up to 2-1/2" dia.; SPADE DRILLS; H.D. BORING BARS; 4TH AXIS 10-3/8" FACEPLATE w/15-1/2" swing, tailstock, CPNC-500 readout box and INDEXABLE BORING BARS; CARTRIDGE STYLE BORING BARS; amplifier; HEAVY DUTY MILLING VISES; YUASA 8" H.D. MILLING VISES; YUASA 6" LATHE CHUCKS; LIVE CENTERS; INDEXABLE CARBIDE TURN- H.D. MILLING VISE; 4" SINE VISE; DRILL DOCTOR DRILL BIT SHARPENER; PNEU- ING TOOLS; H.D. ALORIS TOOLPOSTS w/large qty. of inter- MATIC IMPACT WRENCHES; PNEUMATIC DRILL AND PNEUMATIC RIGHT ANGLE changeable holders; PLUG AND BOTTOMING TAPS; MILLING GRINDER; ELECTRIC STRAIGHT AND RIGHT ANGLE HAND GRINDERS; BLACK & CUTTERS; CORNER ROUNDING CUTTERS; SUCKER ROD TAPS. DECKER PORTABLE BANDSAW; ENERPAC HYDRAULIC JACK SYSTEM w/hand pump. HARDENED & GROUND CAT-50 TOOLHOLDERS LEAD & TAPER GAUGES CUSTOM H-FRAME 75 T. HYD. PRESS 2008 SULLAIR 30 HP ROTARY SCREW AIR COMPRESSOR FREE STANDING PEDESTAL JIB CRANE ROTARY SCREW AIR COMPRESSOR FREE STANDING PEDESTAL JIB CRANES SULLAIR MDL. 2209/A, new 2008, 30 HP drive motor, noise enclosure, air CUSTOM 2 T. X APPROX. 16' REACH, approx. 12' under hook, trolley, manu- cooled, skid mtd., S/N 200610 210030. al chain fall. CRANE CO. 1 T. X APPROX. 12' REACH, approx. 10' under hook, Dayton 1 T. WELDING EQUIPMENT cap. elec. chain w/pendant control. MILLER MDL. XMT300 DC INVERTER MIG WELDER, 300 amp @ 32 v., 60% RELIABLE 1/2 T. X APPROX. 18' REACH, approx. 8' under hook, P&H 1/2 T. duty cycle, Mdl. S22A constant spd. wire feeder, accessories, S/N KF767078. cap. wire rope hoist w/pendant control. ZIP LIFT P&H 1 T. CAP. ELECTRIC CHAIN HOIST. LARGE ASSORTMENT PIPE HANDLING EQUIPMENT FORKLIFTS CUSTOM POWERED PIPE HANDLING STANDS, motorized height adjust- TOYOTA 8,000 LB. CAP., Mdl. 7FGCU35, new 2006, LPG, 87" wide view ment, V rest rollers, powered pipe rotation, heavy fabricated construction. mast, 132" lift height, cushion tires, 42" forks, 3550 hours on digital meter, S/N 64139. ASSORTED PIPE RACKS AND STANDS, fabricated tubular/RR rail construction. HYSTER 5,000 LB. CAP., Mdl. S50XM, new 2003, LPG, 83" wide view mast, CUSTOM APPROX. 8" HYDRAULIC COUPLING BUCKING VISE. 130" lift height, cushion tires, side shift, 42" forks, S/N D187V28357A. 2006 AUCTION 2003 THURSDAY, MAY 27 10:00 A.M. INSPECTION: Wednesday, May 26 9:00 A.M. to 4:00 P.M. & Morning of Sale TOYOTA 8,000 LB. CAP. FORKLIFT HYSTER 5,000 LB. CAP. FORKLIFT MACHINE SHOP ACCESSORIES SAMPLE VIEW OF MOTORIZED PIPE STANDS AND RACKS Presorted PUBLIC INVITED First Class Mail P.O. Box 19100 U.S. Postage PAID Houston, TX 77224-9100 THURSDAY, MAY 27 • 10:00 A.M. Eugene, Oregon Permit No. 17 DATED MATERIAL – PLEASE DELIVER CNC & MANUAL HOLLOW SPINDLE THREADING ATTENTION: PLANT MANAGER & VERTICAL MACHINING OR EQUIPMENT BUYER FACILITY Featuring: Hollow Spindle & Gap Bed Engine Lathes; 4-Axis CNC Vert.
Load more

Recommended publications
  • Gear Cutting and Grinding Machines and Precision Cutting Tools Developed for Gear Manufacturing for Automobile Transmissions
    Gear Cutting and Grinding Machines and Precision Cutting Tools Developed for Gear Manufacturing for Automobile Transmissions MASAKAZU NABEKURA*1 MICHIAKI HASHITANI*1 YUKIHISA NISHIMURA*1 MASAKATSU FUJITA*1 YOSHIKOTO YANASE*1 MASANOBU MISAKI*1 It is a never-ending theme for motorcycle and automobile manufacturers, for whom the Machine Tool Division of Mitsubishi Heavy Industries, Ltd. (MHI) manufactures and delivers gear cutting machines, gear grinding machines and precision cutting tools, to strive for high precision, low cost transmission gears. This paper reports the recent trends in the automobile industry while describing how MHI has been dealing with their needs as a manufacturer of the machines and cutting tools for gear production. process before heat treatment. A gear shaping machine, 1. Gear production process however, processes workpieces such as stepped gears and Figure 1 shows a cut-away example of an automobile internal gears that a gear hobbing machine is unable to transmission. Figure 2 is a schematic of the conven- process. Since they employ a generating process by a tional, general production processes for transmission specific number of cutting edges, several tens of microns gears. The diagram does not show processes such as of tool marks remain on the gear flanks, which in turn machining keyways and oil holes and press-fitting bushes causes vibration and noise. To cope with this issue, a that are not directly relevant to gear processing. Nor- gear shaving process improves the gear flank roughness mally, a gear hobbing machine is responsible for the and finishes the gear tooth profile to a precision of mi- crons while anticipating how the heat treatment will strain the tooth profile and tooth trace.
    [Show full text]
  • Army Technical Manual for 7" South Bend Shaper
    TM 9-3418-200-14&P TECHNICAL MANUAL OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR SHAPER, METAL CUTTING, HORIZONTAL MODEL CS100 (SOUTH BEND LATHE) (NSN 3418-00-223-0969) THIS PUBLICATION IS A COURTESY QUICK COPY FROM THE UNITED STATES ARMY PUBLICATIONS DISTRIBUTION CENTER, ST. LOUIS, MISSOURI, TO MEET YOUR NEEDS WHILE WE REPLENISH OUR REGULAR STOCK. HEADQUARTERS, DEPARTMENT OF THE ARMY FEBRUARY 1982 TM 9-3418-200-14&P TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY NO. 9-3418-200-14&P WASHINGTON, DC, 26 February 1982 Operator's, Organizational, Direct Support and General Support Maintenance Manual For SHAPER, METAL CUTTING, HORIZONTAL MODEL CS100 (NSN 3418-00-223-0960) REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual. If you find any mistakes or if you know of a way to improve the procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications and Blank Forms or DA Form 2028-2, located in the back of this manual direct to: Commander, US Army Armament Materiel Readiness Command, ATTN: DRSAR-MAS, Rock Island, IL 61299. A reply will be furnished directly to you. NOTE This manual is published for the purpose of identifying an authorized commercial manual for the use of the personnel to whom this equipment is issued. Manufactured by: South Bend Lathe 400 West Sample Street South Bend, IN 46621 Procured under Contract No. DAAA09-76-C-6387 This technical manual is an authentication of the manufacturers' commercial literature and does not conform with the format and content specified in AR 310-3, Military Publications.
    [Show full text]
  • Precision Tools
    Precision Tools Precision Tools Gear Cutting Tools & Broaches Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. ndex Gear Cutting Tools Gear Cutting Comparison and Types 25 Broaches Design of Broach ools Guidance NACHI Accuracy of Gear Shaper Cutters 26 Technical Introduction Basic Design and Cutting Method 61 Materials and Coating of Gear Cutting Tools 5 Cutting Condition and Regrinding 27 Hard Broaches 45 Calculation of Pulling Load 62 Gear Cutting T Disk Type Shaper Cutters Type1Standard Dimensions 28 Broach for MQL 46 Face Angle and Relief Angle 63 Technical Introduction Disk Type Shaper Cutters Type2Standard Dimensions 30 Off-normal Gullet Helical Broach 47 Finished Size of Broaches 64 Hard Hobbing 6 Disk Type Shaper Cutters Type2Standard Dimensions 31 Micro Module Broaching 48 Helical Gear Shaper Cutters High Speed Dry Hobbing 7 Essential Points and Notice 65 Disk
    [Show full text]
  • BK Gearshapersbrochure#2 (Page 1)
    O.E.M. PRODUCTS O.E.M. PRODUCTS continued O.E.M. REPLACEMENT PARTS Bourn & Koch Horizontal Gear Hobbers Acme Multi Spindle Machines Gear Manufacturing Machines SHAPERSHAPER DIVISIONDIVISION OFOF BOBOURNURN & KOCHKOCH INC.INC. 25H CNC 1" x 4" Capacity 7/16" RA-6 6 Spindle Barber Colman (815) 965-4082 100H CNC 5" x 20"-32" Capacity 1" RAN-6 6 Spindle Bourn & Koch (815) 965-4082 200H CNC 8" x 52"-72" Capacity 1-1/4" RB-8 8 Spindle Fellows (802) 674-6500 400H CNC 18" x 52"-72" Capacity 1-1/4" RA-6 6 Spindle Roto-Technology (937) 859-8503 600H CNC 25" x 100"-148" Capacity 1-1/4" HP-6 6 Spindle High Precision 1-5/8" RB-8 8 Spindle Turning Centers/VTL’s/Lathes Fellows Gear Shapers 1-5/8" RBN-8 8 Spindle American Tool Inc. (800) 248-8121 Mechanical Stroking: 1-5/8" HPN-8 8 Spindle High Precision Bullard (800) 248-8122 10-04 10" x 4" Capacity 2" RB-8 8 Spindle Jones & Lamson (802) 674-6500 20-04 20" x 4" Capacity 2-3/8" HSC-6 6 Spindle High Speed Chucker Motch (800) 728-8602 MS 300 300 mm x 125mm New Britain (800) 243-4542 MS450 450mm x 125mm Capacity Extrusion Milling Machines Sheldon Lathe (800) 553-2263 MS650 650mm x 125mm Capacity EMC-12 Extrusion Milling Machine Machining Centers/Boring Mills Rack Shaper: 10-04RS Up to 12 CNC axis including contouring capabilities. Bullard (800) 248-8122 Steering Sector Shaper: 4-3SS 4" x 3" Capacity Rotary Transfer & Rotary Trunion Machining Centers DeVlieg (800) 248-8120 Hydraulic Stoking: Designed around the customers specialized needs Futurmill (800) 248-8120 HS450 450mm x 200mm Capacity based on a modular design for easy change overs.
    [Show full text]
  • Shaper Machine: Definition, Working, Types, Operations, Specification, Advantages, Disadvantages, and Application (With PDF)
    Shaper Machine: Definition, Working, Types, Operations, Specification, Advantages, Disadvantages, and Application (With PDF) In Manufacturing Technologyby Amrit KumarFebruary 28, 2019Leave a Comment Table of Contents Shaper Machine Definition: Working Principle of Shaper Machine: Types of Shaper Machine: Operations Performed on Shaper Machine: Parts of a Shaper Machine with Function: Specification of Shaper Machine: Advantages of Shaper Machine: Disadvantages of Shaper Machine: Applications of Shaper Machine: Hydraulic Shaper Mechanism in Shaper Machine: Conclusion: Hello, readers in today’s article, we will learn how a shaper machine works also we learn about the parts, types, operations, specification, advantages disadvantages, and applications of a shaper machine. So let’s start with the definition of shaper machine. Shaper Machine Definition: The Shaper is a reciprocating type of machine tool basically used to produce Horizontal, Vertical or Inclined flat surfaces by means of straight-line reciprocating single-point cutting tools similar to those which is used in lathe operation. The flat surface produced may be horizontal, vertical or inclined at an angle Working Principle of Shaper Machine: A shaper machine is working on the following principle: A shaper machine holds the Single point cutting tool in ram and workpiece is fixed over the table. The ram holding the tool reciprocates over the workpiece and metal is cut during the forward stroke called a cutting stroke and No metal is cut during its return stroke is called an Idle stroke. The feed is given at the end of the cutting stroke. Generally, the cutting stroke is carried out at slow speed and the idle stroke is carried at high speed with the help of quick return mechanism.
    [Show full text]
  • New Technology of Gear Cutting That Contributes to Customer's
    Mitsubishi Heavy Industries Technical Review Vol. 49 No. 3 (September 2012) 29 Latest Gear Cutting Technology that Improves Customer Productivity (Increase in Speed of ST Series NC Guide Gear Shaping Machine) TOSHIMASA KIKUCHI*1 YOSHIHIRO NOSE*2 KATSUHIDE YABE*2 TAKAHIDE TOKAWA*3 Mitsubishi Heavy Industries, Ltd. (MHI) was the first company in the world to establish the dry cut system, which contributes to a clean work environment and high productivity by eliminating the use of cutting oil for the processing of gears. We have been actively offering new technologies, including the one mentioned above, that satisfy the needs of customers. There is a growing need for further improvement of productivity, including the reduction of processing time, from mass production lines of automobiles and other products, as well as from job shops that manufacture multiple types of gears in small quantity. In this paper, we will introduce the latest technologies for productivity improvement of gear cutting machines, taking the ST series NC guide gear shaping machine, one of the gear cutting machines developed by MHI, as an example. |1. Introduction A gear shaper is a gear cutting machine that is generally used to process internal gears and stepped gears. As shown in Figure 1, the cutter and the workpiece are rotated synchronously while the cutter is moved back and forth for processing gears. The gear shaper features a unique function, where a helical guide is used to move gears helically along the cutter lead for the processing of helical gears that are twisted along the helical path. The helical guide needs to be replaced responding to the change of the cutter lead, but helical guides are expensive and replacement requires a fair amount of time and a lot of skill.
    [Show full text]
  • Safeguarding Machinery and Equipment: General Requirements
    Safeguarding Machinery and Equipment General Requirements About WorkSafeBC WorkSafeBC (the Workers’ Compensation Board) is an independent provincial statutory agency governed by a Board of Directors. It is funded by insurance premiums paid by registered employers and by investment returns. In administering the Workers Compensation Act, WorkSafeBC remains separate and distinct from government; however, it is accountable to the public through government in its role of protecting and maintaining the overall well-being of the workers’ compensation system. WorkSafeBC was born out of a compromise between BC’s workers and employers in 1917 where workers gave up the right to sue their employers or fellow workers for injuries on the job in return for a no-fault insurance program fully paid for by employers. WorkSafeBC is committed to a safe and healthy workplace, and to providing return-to-work rehabilitation and legislated compensation benefits to workers injured as a result of their employment. WorkSafeBC Prevention Information Line The WorkSafeBC Prevention Information Line can answer your questions about workplace health and safety, worker and employer responsibilities, and reporting a workplace accident or incident. The Prevention Information Line accepts anonymous calls. Phone 604 276-3100 in the Lower Mainland, or call 1 888 621-7233 (621-SAFE) toll-free in British Columbia. To report after-hours and weekend accidents and emergencies, call 604 273-7711 in the Lower Mainland, or call 1 866 922-4357 (WCB-HELP) toll-free in British Columbia.
    [Show full text]
  • Shaper, Milling & Gear Cutting M/C
    Shaper, Milling & Gear Cutting M/c SHAPER Mr. K. Gobivel Assistant Professor / Mechanical KCG College of Technology Types of Shaper Types of shaper: Shapers can classified into many types based on several criteria: Based on the type of driving mechanism used • – Crank and slotted lever driving mechanism type • – Whitworth quick return driving mechanism type • – Hydraulic driving mechanism type Based on the table design • – Plain Shaper • – Universal Shaper Based on the position of the reciprocating ram used • – Horizontal shaping machine (Most common type of shaper used) • – Vertical shaping machine • – Travelling head shaping machine Based on the type of cutting stroke of the tool • – Push out type • – Draw cut type Shaper Mechanism In shaper, rotary movement of the drive is converted into reciprocating movement by the mechanism contained within the column of the machine. The reciprocating movement of the ram and the quick return mechanism of the machine are usually obtained by any one of the following methods 1. Crank and slotted link mechanism 2. Whitworth quick return mechanism 3. Hydraulic shaper mechanism Whitworth quick return mechanism Hydraulic shaper mechanism Shaper, Planer and Slotter M/c Planer Slotter Difference b/w three types Shaper: Operations Types of operations • Machining horizontal surface • Machining vertical surface • Machining angular surface • Cutting slots, grooves and keyways • Machining irregular surface • Machining splines or cutting gears Horizontal & Vertical Surface Making Chuck key Making V Block Tool slide is tilted for V block angle Making an external key way Making of Dovetail Making of rack Making of an internal keyway Machining a contour surface.
    [Show full text]
  • A South Bend "Set up and Cut" Shaper Pamphlet
    330. The Metal Shaper. The metal working shaper is used principally for machining flat surfaces. These PHOTO COURTESY SOUTH BEND LATHE WORKS A. Clapper Box O. Feed Rod B. Down-feed Handle P. Table Elevating Crank C. Head Q. Cross-feed Crank D. Head Swivel Lock Screw R. Cross-rail E. Ram Clamping Handle S. Base F. Ram T. Work-table Support G. Switch Box U. Support Locking Handle H. Hand Wheel V. Work Table J. Drive-pulley Guard W. Vise K. Motor X. Lamp L. Motor Cradle Y. Tool Post M. Tension Release Lever Z. Tool Holder N. Eccentric surfaces may be any angle to one another. Irregular surfaces may also be machined on the shaper. The body or column of the shaper carries a ram which reciprocates back and forth over the work which is clamped in the vise. METAL WORK - BENCH AND MACHINE 177 The size of the shaper is determined by the maximum length of stroke or travel of the ram. The one shown is a 7" shaper which requires a 1/2 H.P. motor at 1725 R.P.M. 331. Table. The table is mounted on the face of the column. It can be raised or lowered by the table elevat- ing crank and moved transversely by the cross-feed crank. The table has three slots in the top and the left side The table support is always lowered against the base parallel with the ram. The right side has two square slots and locked in position. and one vee slot which are vertical to the ram.
    [Show full text]
  • National Guidelines for Apprenticeship Standards
    Revison NATIONAL GUIDELINES FOR APPRENTICESHIP STANDARDS Developed by the International Union of Electronic, Electrical, Salaried, Machine and Furniture Workers (IUE), the Industrial Division of the Communications Workers of America (CWA), AFL-CIO, CLC. for the occupations of Electrician Machine Repairer, Maintenance Maintenance Machinist Millwright Pipe Fitter Plumber Tool and Die Maker DEVELOPED IN COOPERATION WITH THE U.S. DEPARTMENT OF LABOR OFFICE OF APPRENTICESHIP APPROVED AND CERTIFIED BY THE U.S. DEPARTMENT OF LABOR OFFICE OF APPRENTICESHIP BY: _____________________________________ JOHN V. LADD, ADMINISTRATOR OFFICE OF APPRENTICESHIP CERTIFICATION DATE: __________________ CERTIFICATION NO: ______________________ FOREWORD IUE-CWA, the Industrial Division of the Communications Workers of America (CWA), AFL-CIO, CLC. has believed from the beginning of our existence that the ability of working men & women to perform in highly skilled, technical positions is unlimited when training and educational resources are made available. We recognize the need for structured training programs to maintain the high level of skill and competence demanded in the manufacturing industry. Our progress as a union and the strength of our nation will be measured in part by our ability to provide an avenue of opportunity for all 25 workers to achieve ultimate skills in their chosen craft. Registered apprenticeship programs are the most practical and sound training system available to develop individuals into skilled journeyworkers, and to ensure industry an adequate supply of skilled workers. Title 29, Code of Federal Regulations (CFR) part 29, outlines the requirements for registration of acceptable apprenticeship programs for Federal purposes, and sets forth labor standards that safeguard the welfare of apprentices. Such registration may be by the U.
    [Show full text]
  • Gear Tool Product Range
    Gear Tools Gear Tool Product Range Liebherr offers a comprehensive range of gear tools, many years of experience in gear manufacturing and maximum product quality. We are a reliable partner offering innovative development and best tool performance. Our product range is in demand by customers all over the world. Liebherr offers not only tool calculations, design and manufacture for all customers but also outstanding after- sales services, including sharpening and coating of gear tools and also reconditioning of CBN grinding tools in our in-house electroplating shop. Tools • Skiving Tools • Shaping Cutters • Wafer Cutters • Solid Wafer Cutters • Rolling Racks • Shaving Cutters • Rolling Deburring Discs • Rolling Chamfering Discs • Rolling Dies • Master Gears • CBN Grinding Tools • Customised Grinding Tools Services • Sharpening and coating (also hobbing tools) • Reconditioning of CBN grinding tools • Profile modifications for shaper cutters • Component and contract manufacture 2 Liebherr-Gear Tools Liebherr-Gear Tools 3 New from Liebherr: Skiving Tools PM-HSS and carbide metal skiving tools Conical and cylindrical tools 1. Tools made from powder-metallurgical steels (PM-HSS) With conical and cylindrical tools, the axis arrangement is have a lower invest, but are subject to increased wear. different: A conical skiving tool maintains a constructive re- 2. Tools made from carbide metal have higher production lief angle and is usually centered, while a cylindrical skiving and material cost due to more expensive raw materials tool requires additional tilting or an off-centered position. The and manufacturing. It is worth while to use them with control system of the Liebherr machines controls both pro- high production output and higher-strength materials.
    [Show full text]
  • Advanced Nanodielectric Material Development and Scaling for Use in Compact Ultra-High Voltage Capacitor Prototypes
    Advanced NanoDielectric Material Development and Scaling for use in Compact Ultra-High Voltage Capacitor Prototypes A Thesis presented to the Faculty of the Graduate School at the University of Missouri - Columbia In Partial Fulfillment of the Requirements for the Degree Master of Science by Samuel A. Dickerson Dr. Randy Curry, Thesis Supervisor DECEMBER 2019 The undersigned, appointed by the Dean of the Graduate School, have examined the thesis entitled: ADVANCED NANODIELECTRIC MATERIAL DEVELOPMENT AND SCALING FOR USE IN COMPACT ULTRA-HIGH VOLTAGE CAPACITOR PROTOTYPES presented by Samuel A. Dickerson, a candidate for the degree of Masters of Science, and hereby certify that, in their opinion, it is worthy of acceptance. Dr. Randy Curry Dr. Mark Prelas Dr. Jacob McFarland Acknowledgements First and foremost, I would like to express my deep and sincere gratitude to my academic advisor, Dr. Randy Curry. He took a chance on a allowing a student with minimal prior research experience join his team, and for that I am extremely grateful. He has served as a great mentor, teaching me extensively about being an effective researcher and scientist. My understanding of and such deep involvement in the pulsed power industry would not have come to be without such guidance. Throughout my time at the University of Missouri, Dr. Curry provided insight, guidance, and encouragement while fostering an environment that supported independent thought and innovation. I also would like to thank the members of my thesis committee for their service. Your review and guidance of my work is much appreciated. In addition, I must also thank the Joint Non-Lethal Weapons Directorate for funding this research.
    [Show full text]