DOCSLIB.ORG

(2013 Olin Palladium Award Address) Mathematical Modeling of Lithium Ion Cells and Batteries R

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
(2013 Olin Palladium Award Address) Mathematical Modeling of Lithium Ion Cells and Batteries R 224th ECS Meeting Abstracts 2013 Meeting Abstracts 2013-02 San Francisco, California, USA 27 October - 1 November 2013 Volume 1 of 5 ISBN: 978-1-63266-492-1 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 Some format issues inherent in the e-media version may also appear in this print version. Copyright© (2013) by The Electrochemical Society All rights reserved. Printed by Curran Associates, Inc. (2014) For permission requests, please contact The Electrochemical Society at the address below. The Electrochemical Society 65 South Main Street Pennington, New Jersey 08534-2839 Phone: (609) 737-1902 Fax: (609) 737-2743 www.electrochem.org Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA Phone: 845-758-0400 Fax: 845-758-2634 Email: [email protected] Web: www.proceedings.com Meeting Abstracts — MA 2013-02 224th ECS Meeting October 27 - November 1, 2013 — San Francisco, CA © 2013 The Electrochemical Society Table of Contents A0 - Special Lectures All Divisions 1 (2013 Olin Palladium Award Address) Mathematical Modeling of Lithium Ion Cells and Batteries R. E. White 2 (2013 Carl Wagner Memorial Award Lecture) Multiple Proton-coupled Electron Transfer in Electrocatalysis: Theory vs Experiment M. T. M. Koper A1 - General Student Poster Session All Divisions 3 Composition Dependence of Glucose Oxidation At Mediated Glucose Oxidase Bioanodes Y. Feliciano and S. Calabrese Barton 4 Electrochromism of O- and S-Esters X. Xu and R. D. Webster 5 Electrochemical Oxidation of Bisphenol A Y. Y. Chan and R. D. Webster 6 A Vertically Integrated Capacitorless DRAM Cell X. Tong, H. Wu, L. Zhao, M. Wang, H. Zhong, and C. Zhao 7 Pd Nanoparticals Dispersed on Low-Defect Carbon Nanotube: For Use as High-Performance Anode Catalyst of DFAFC C. Hu, Y. Fan, and X. Wang 8 Surface Decoration of Indium Tin Oxide with Amine-Terminated Dendrimers Encapsulating Nanoparticles via Electrooxidative Grafting Y. Kim, S. B. Lee, and J. Kim 9 Reduced Graphene Oxide Wrapped FeS Nanocomposite for Lithium-Ion Battery Anode with Improved Performance L. Fei and H. Luo 10 Covalent Decoration of Reduced Graphene Oxide with Dendrimer-Encapsulated Nanoparticles Y. Ju, J. M. Kim, and J. Kim 11 X-Ray Diffraction Studies of the Electrochemical Intercalation of Bis(trifluoromethanesulfonyl) Imide Anions into Graphite T. Placke, G. Schmuelling, R. Kloepsch, O. Fromm, S. Rothermel, P. Meister, H. W. Meyer, and M. Winter 12 Fabrication and Characterization of Polyaniline/TiO2/Graphene Nanocomposite and its Application as an Efficient Electrochemical Supercapacitor R. Srivastava and S. P. Satsangee 13 Enhanced Catalytic Oxygen Reduction Performance from Titania Supported PtPb Nanoparticles T. Gunji, G. Saravanan, S. Kaneko, G. Kobayashi, and F. Matsumoto 14 Synthesis of Intermetallic Nanoparticles as Co-Catalyst on Anatase TiO2 and Its Photocatalytic Activity T. Tsuda, G. Saravanan, A. J. Jeevagan, M. Hashimoto, S. Kaneko, G. Kobayashi, and F. Matsumoto 15 Electrochemical Study of the Bromide/Bromine Reaction in Nonaqueous Solvents B. Bennett, J. Chang, and A. J. Bard 16 Ordered Vanadium Oxide Inverted Opal Li-Ion Battery Electrodes and Optical Probing of Phase Changes E. Armstrong, W. Khunsin, M. Osiak, C. M. Sotomayor Torres, and C. O'Dwyer 17 Synthesis of Nanostructured Bi2Te3 by Controlling Metal Species in Aqueous Solution S. Yokoyama, K. Sato, H. Takahashi, and K. Tohji 18 Application of Stratified ZnS Photocatalysts against to the Water Clarification Materials Y. Suito, S. Yokoyama, H. Takahashi, K. Suto, C. Inoue, and K. Tohji 19 Redox Site Separation Effects for Photocatalytic Activity Using ZnS Stratified Photocatalysts A. Kobayashi, S. Yokoyama, H. Takahashi, and K. Tohji 20 Separation of Redox Site by Utilizing the Nanostructure of ZnS Stratified Photocatalysts A. Kobayashi, S. Yokoyama, H. Takahashi, and K. Tohji 21 Bactericidal Mechanisms of Stratified ZnS Photocatalysts and ZnO Nanoparticles Y. Suito, S. Yokoyama, H. Takahashi, K. Suto, C. Inoue, and K. Tohji 22 Relationship between Detailed Condition of Pt Nano Co-Catalyst on the Surface of Photocatalysts and Its Activity K. Ito, S. Yokoyama, H. Takahashi, and K. Tohji 23 Relationship between the Copper Complexes Condition in Aqueous Solution and Its Reduction Potentials to Synthesize CIGS Alloy Nano Materials H. Fujiki, S. Yokoyama, H. Takahashi, and K. Tohji 24 The Effect of Bimetallic Surface Composition On the Activity Towards Ethanol Oxidation T. Garrick, W. Diao, J. Tengco, J. Monnier, and J. W. Weidner 25 Quantum Analysis of the Oxygen Reduction Reaction Mechanism At the Mitochondria Y. C. Ting 26 Capacity and Energy Densities of Rechargeable MH/Air Battery Using A2B7 Type Hydrogen Storage Alloy H. Matsuda and M. Morimitsu 27 Effects of Crystallographic Structure of IrO2-Ta2O5 Catalyst On Oxygen Evolution in Alkaline Solutions S. Unoki, T. Zhang, and M. Morimitsu 28 Voltammetric Behavior Of The Cubic Silsesquioxane Modified With PURPALD® FOR Determination Of Sulfite D. R. Silvestrini and D. R. Do Carmo 29 Selective Detection of Hydrogen Concentration in Mixture Gas With Methane Using An Electrolyte Made of Manganese Dioxide R. Araki, H. Koyanaka, and K. Yoshikawa 30 Formation Process of Self-Assembled Monolayer of Porphyrin Molecule With 4 Thiol Groups On Au(111) N. Aoki, B. Zhang, T. Arisaka, and T. Kondo 31 Improvement of Photo-Carrier Transport Efficiency From the Semiconductor Particles to Electrode By Using Organic Carrier Transport Materials T. Mabuchi, S. Yokoyama, N. Shimoi, H. Takahashi, and K. Tohji 32 Basic Study for the Construction of Wet Solar Cell Using CdS Photocatalysts, Na2S4 Electrolyte, and Inorganic Photo-Carrier Transport Materials T. Mabuchi, S. Yokoyama, N. Shimoi, H. Takahashi, and K. Tohji 33 Stable Charge/Discharge Cycle Performance of LiFePO4 Cathode Prepared With Carboxymethly Cellulose Binder T. Wakao, Y. Mochizuki, G. Saravanan, A. J. Jeevagan, K. Baba, M. Watanabe, Y. Kanda, K. Murakami, M. Omura, G. Kobayashi, and F. Matsumoto 34 Negative Electrodes Based on the FexZn1-X Alloy System L. MacEachern, R. Dunlap, and M. Obrovac 35 Enhanced Efficiency of Dye-Sensitized Solar Cells Using TiO2-Tourmaline Composites Photoanode H. S. Ko, G. H. Jeong, S. J. Kim, E. M. Han, J. J. Yun, and K. H. Park 36 Electrochemical Decoration of Glassy Carbon Electrodes With Amine-Terminated Dendrimers Encapsulating Nanoparticles for Construction of Bifunctional Nanostructures S. B. Lee and J. Kim 37 Charge and Molecular Transport At Large Area, Single Layer Graphene Electrodes N. L. Ritzert, J. Rodríguez-López, C. Tan, J. A. Mann, W. R. Dichtel, and H. D. Abruña 38 Improvement of Dye-Sensitized Solar Cells Performance Using TiO2 nanoparticle/Nanorod Composite Photoanode H. S. Ko, E. M. Han, C. K. Hong, and K. H. Park 39 Photoelectrochemistry of Silver Clusters Supported On TiO2 Under Visible Light Irradiation A. Kogo, N. Sakai, and T. Tatsuma 40 Reflective Color Display Using Fluidic Photonic Crystal W. Lee and K. KO 41 Synthesis of Organic/Inorganic Hybrid Microspheres By Emulsion Polymerization in the Presence of Titania Nanoparticles in Water W. Lee and D. Ahn 42 Insight Into the Electrode Mechanism in Lithium-Sulfur Batteries With Ordered Microporous Carbon Confined Sulfur As Cathode Z. Li, L. Yuan, Z. Yi, Y. Liu, Y. Xin, Z. Zhang, and Y. Huang 43 Activities of Pseudomorphic Pt Layers Electrochemically Prepared On Au(111) for Various Electrocatalytic Reactions M. Ishizaki, M. Kawabuchi, I. Yagi, and T. Kondo 44 Structural Studies of Binding Group Terminated Self-Assembled Monolayers On Au(111) for Construction of Flatly Adsorbed Porphyrin Layers T. Arisaka, B. Zhang, N. Aoki, and T. Kondo 45 Electrochemical Construction of Ni and Co Core - Pt Shell Nanoparticles As Catalysts for Oxygen Reduction Reaction H. Nagai, M. Kawabuchi, and T. Kondo 46 Rrde Studies On Oxygen Reduction and Hydrogen Oxidation Reactions of Pd Single Crystal Electrodes M. Kawabuchi, M. Ishizaki, and T. Kondo 47 Synthesis of LiFePO 4 via a Novel Carbon-Free Precipitation Method H. Feng 2-X 48 Cobalt Electrodeposition From Electrolyte Containing [CoClx(H2O)6-X] (x = 0, 1, 2) Complexes K. Mech, P. Żabiński, R. Kowalik, and K. Fitzner 49 Electrochromic and Electrochemical Properties of Copper Prussian Blue Analog Nanoparticles Prepared By Micro Flow Mixing Method K. M. Lee, H. Tanaka, A. Takahashi, K. H. Kim, M. Kawamura, Y. Abe, and T. Kawamoto 50 Efficient Material Screening By Combining DFT Method and Multivariate Analysis R. Jalem, M. Nakayama, and T. Kasuga 51 Structural and Optical Characterization of GaN Porous Structures Formed By Photo-Assisted Electrochemical Process Y. Kumazaki, A. Watanabe, Z. Yatabe, and T. Sato 52 Calculation of Oxygen Defect Structure in Layered GdBaCo2O5+δ By First-Principles DFT With Monte Carlo Simulations H. Shiiba, M. Nakayama, T. Kasuga, R. W. Grimes, and J. A. Kilner 53 Knitted Electrochemical Capacitors for Applications in Smart Garments K. Jost, L. M. Haverhals, D. P. Durkin, J. McDonough, C. R. Perez, H. C. De Long, P. C. Trulove, G. Dion, and Y. Gogotsi 54 Influence of Synthesis Route On Electrical Conduction Property, Crystal and Electronic Structures of Apatite-Type Lanthanum Silicate K. Kaneko, N. Kitamura, N. Ishida, and Y. Idemoto 55 Analysis of Crystal and Electronic Structuresduring Charge and Discharge Process of LiNi0.8Co0.2O2 As a Cathode Material Forlithium Ion Battery A. Horie, N. Kitamura, N. Ishida, and Y. Idemoto 56 Synthesis and Characterization of Solid Polysiloxane Electrolyte for Energy Storage Devices Y. Lin, H. Yao, Y. Cheng, and J. Liu 57 Effect of Polarization and Synthesis Process On Crystal Structure and Ferroelectric and Piezoelectric Properties of BaTiO3 R. Ifuku, N. Kitamura, N. Ishida, and Y. Idemoto 58 Orientation of Copper(I) Oxide Electrodeposited From Aqueous Solutions Y. Seki, A. Kitada, and K. Murase 59 Formation of a Bilayer of Low-Temperature CVD-SiO2 and Sputtered Al2O3 Films On Polyethylene Terephthalate Substrates for OLED Encapsulation Layer H. J. Kim, S. H.
Load more

Recommended publications
  • Defect Chemistry and Transport Properties of Solid State Materials for Energy Storage Applications
    University of Kentucky UKnowledge Theses and Dissertations--Chemical and Materials Engineering Chemical and Materials Engineering 2018 DEFECT CHEMISTRY AND TRANSPORT PROPERTIES OF SOLID STATE MATERIALS FOR ENERGY STORAGE APPLICATIONS Xiaowen Zhan University of Kentucky, [email protected] Author ORCID Identifier: https://orcid.org/0000-0002-1422-6233 Digital Object Identifier: https://doi.org/10.13023/etd.2018.418 Right click to open a feedback form in a new tab to let us know how this document benefits ou.y Recommended Citation Zhan, Xiaowen, "DEFECT CHEMISTRY AND TRANSPORT PROPERTIES OF SOLID STATE MATERIALS FOR ENERGY STORAGE APPLICATIONS" (2018). Theses and Dissertations--Chemical and Materials Engineering. 88. https://uknowledge.uky.edu/cme_etds/88 This Doctoral Dissertation is brought to you for free and open access by the Chemical and Materials Engineering at UKnowledge. It has been accepted for inclusion in Theses and Dissertations--Chemical and Materials Engineering by an authorized administrator of UKnowledge. For more information, please contact [email protected]. STUDENT AGREEMENT: I represent that my thesis or dissertation and abstract are my original work. Proper attribution has been given to all outside sources. I understand that I am solely responsible for obtaining any needed copyright permissions. I have obtained needed written permission statement(s) from the owner(s) of each third-party copyrighted matter to be included in my work, allowing electronic distribution (if such use is not permitted by the fair use doctrine) which will be submitted to UKnowledge as Additional File. I hereby grant to The University of Kentucky and its agents the irrevocable, non-exclusive, and royalty-free license to archive and make accessible my work in whole or in part in all forms of media, now or hereafter known.
    [Show full text]
  • Multi-Ionic Lithium Salts for Use in Solid Polymer
    A Dissertation Submitted to the Temple University Graduate Board In Partial Fulfillment of the Requirements for the Degree by Examining Committee Members: ABSTRACT Commercial lithium ion batteries use liquid electrolytes because of their high ionic conductivity (>10-3 S/cm) over a broad range of temperatures, high dielectric constant, and good electrochemical stability with the electrodes (mainly the cathode). The disadvantages of their use in lithium ion batteries are that they react violently with lithium metal, have special packing needs, and have low lithium ion transference + numbers (tLi = 0.2-0.3). These limitations prevent them from being used in high energy and power applications such as in hybrid electric vehicles (HEVs), plug in electric vehicles (EVs) and energy storage on the grid. Solid polymer electrolytes (SPEs) will be good choice for replacing liquid electrolytes in lithium/lithium ion batteries because of their increased safety and ease of processability. However, SPEs suffer from RT low ionic conductivity and transference numbers. There have been many approaches to increase the ionic conductivity in solid polymer electrolytes. These have focused on decreasing the crystallinity in the most studied polymer electrolyte, polyethylene oxide (PEO), on finding methods to promote directed ion transport, and on the development of single ion conductors, where the anions are + + immobile and only the Li ions migrate (i.e. tLi = 1). But these attempts have not yet achieved the goal of replacing liquid electrolytes with solid polymer electrolytes in lithium ion batteries. In order to increase ionic conductivity and lithium ion transference numbers in solid polymer electrolytes, I have focused on the development of multi-ionic lithium salts.
    [Show full text]
  • Hydrogen Absorption and Lithium Ion Conductivity in Li6nbr3 Howard, Matthew; Clemens, Oliver; Slater, Peter; Anderson, Paul
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by University of Birmingham Research Portal Hydrogen absorption and lithium ion conductivity in Li6NBr3 Howard, Matthew; Clemens, Oliver; Slater, Peter; Anderson, Paul DOI: 10.1016/j.jallcom.2015.01.082 License: Other (please specify with Rights Statement) Document Version Peer reviewed version Citation for published version (Harvard): Howard, M, Clemens, O, Slater, P & Anderson, P 2015, 'Hydrogen absorption and lithium ion conductivity in Li6NBr3', Journal of Alloys and Compounds, vol. 645, pp. S174-S175. https://doi.org/10.1016/j.jallcom.2015.01.082 Link to publication on Research at Birmingham portal Publisher Rights Statement: NOTICE: this is the author’s version of a work that was accepted for publication in Jounal of Alloys and Compounds. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Alloys and Compounds, DOI: 10.1016/j.jallcom.2015.01.082. Eligibility for repository checked March 2015 General rights Unless a licence is specified above, all rights (including copyright and moral rights) in this document are retained by the authors and/or the copyright holders. The express permission of the copyright holder must be obtained for any use of this material other than for purposes permitted by law. •Users may freely distribute the URL that is used to identify this publication.
    [Show full text]
  • Metal Nitride Ammonia Decomposition Catalysts†‡ Cite This: DOI: 10.1039/C8cp02824a Joshua W
    PCCP View Article Online PAPER View Journal Bulk phase behavior of lithium imide–metal nitride ammonia decomposition catalysts†‡ Cite this: DOI: 10.1039/c8cp02824a Joshua W. Makepeace, *ab Thomas J. Wood, b Phillip L. Marks,ab Ronald I. Smith,b Claire A. Murray c and William I. F. David*ab Lithium imide is a promising new catalyst for the production of hydrogen from ammonia. Its catalytic activity has been reported to be significantly enhanced through its use as a composite with various transition metal nitrides. In this work, two of these composite catalysts (with manganese nitride and iron nitride) were examined using in situ neutron and X-ray powder diffraction experiments in order to explore the bulk phases present during ammonia decomposition. Under such conditions, the iron Received 3rd May 2018, composite was found to be a mixture of lithium imide and iron metal, while the manganese composite Accepted 31st July 2018 contained lithium imide and manganese nitride at low temperatures, and a mixture of lithium imide DOI: 10.1039/c8cp02824a and two ternary lithium–manganese nitrides (LixMn2ÀxN and a small proportion of Li7MnN4) at higher Creative Commons Attribution 3.0 Unported Licence. temperatures. The results indicate that the bulk formation of a ternary nitride is not necessary for rsc.li/pccp ammonia decomposition in lithium imide–transition metal catalyst systems. Introduction catalysts4 (although iron and nickel catalysts are still of relevance as their low cost allows for higher metal loadings to compensate In addition to being the feedstock for fertilisers that produce for their lower intrinsic activity5). roughly half the global food supply,1 ammonia has significant Since initial reports on the promising performance of potential for use as a sustainable fuel.
    [Show full text]
  • Metal Borohydrides and Derivatives
    Metal borohydrides and derivatives - synthesis, structure and properties - Mark Paskevicius,a Lars H. Jepsen,a Pascal Schouwink,b Radovan Černý,b Dorthe B. Ravnsbæk,c Yaroslav Filinchuk,d Martin Dornheim,e Flemming Besenbacher,f Torben R. Jensena * a Center for Materials Crystallography, Interdisciplinary Nanoscience Center (iNANO), and Department of Chemistry, Aarhus University, Langelandsgade 140, DK-8000 Aarhus C, Denmark b Laboratory of Crystallography, DQMP, University of Geneva, 1211 Geneva, Switzerland c Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, Campusvej 55, 5230 Odense M, Denmark d Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Place L. Pasteur 1, B-1348 Louvain-la-Neuve, Belgium e Helmholtz-Zentrum Geesthacht, Department of Nanotechnology, Max-Planck-Straße 1, 21502 Geesthacht, Germany f Interdisciplinary Nanoscience Center (iNANO) and Department of Physics and Astronomy, DK- 8000 Aarhus C, Denmark * Corresponding author: [email protected] Contents Abstract 1. Introduction 2. Synthesis of metal borohydrides and derivatives 2.1 Solvent-based synthesis of monometallic borohydrides 2.2 Trends in the mechanochemical synthesis of metal borohydrides 2.3 Trends in the mechanochemical synthesis of metal borohydride-halides 2.4 Mechanochemical reactions, general considerations 2.5 Mechanical synthesis in different gas atmosphere 2.6 Single crystal growth of metal borohydrides 2.7 Synthesis of metal borohydrides with neutral molecules 3. Trends in structural chemistry of metal borohydrides 3.1 Monometallic borohydrides, the s-block – pronounced ionic bonding 3.2 Monometallic borohydrides with the d- and f-block 3.3 Strongly covalent molecular monometallic borohydrides 3.4 Bimetallic s-block borohydrides 3.5 Bimetallic d- and f-block borohydrides 3.6 Bimetallic p-block borohydrides 3.7 Tri-metallic borohydrides 3.8 General trends in the structural chemistry of metal borohydrides 3.9 Comparisons between metal borohydrides and metal oxides 4.
    [Show full text]
  • Hydrophobic Ionic Liquids Hydrophobe Ionische Flüssigkeiten Liquides Ioniques Hydrophobes
    (19) & (11) EP 0 839 139 B2 (12) NEW EUROPEAN PATENT SPECIFICATION After opposition procedure (45) Date of publication and mention (51) Int Cl.: of the opposition decision: C07D 233/54 (2006.01) H01M 10/40 (2006.01) 18.11.2009 Bulletin 2009/47 H01M 6/16 (2006.01) (45) Mention of the grant of the patent: (86) International application number: 03.09.2003 Bulletin 2003/36 PCT/US1996/011097 (21) Application number: 96923544.9 (87) International publication number: WO 1997/002252 (23.01.1997 Gazette 1997/05) (22) Date of filing: 28.06.1996 (54) HYDROPHOBIC IONIC LIQUIDS HYDROPHOBE IONISCHE FLÜSSIGKEITEN LIQUIDES IONIQUES HYDROPHOBES (84) Designated Contracting States: (56) References cited: DE FR GB • J. ELECTROCHEM. SOC., vol. 141, no. 7, 1994, pages L73-L76, XP000605410 R.T. CARLIN ET (30) Priority: 30.06.1995 US 497310 AL.: "Dual intercalating molten electrolyte batteries" (43) Date of publication of application: • CHEMICAL ABSTRACTS REGISTRY HANDBOOK 06.05.1998 Bulletin 1998/19 - NUMBER SECTION., 1993, COLUMBUS US, pages 4899rv-4906rv, XP002016355 & CHEMICAL (73) Proprietor: COVALENT ASSOCIATES ABSTRACTS, vol. 120, no. 16, 1994 Columbus, INCORPORATED Ohio, US; abstract no. 206757g, YUKIHIRO ET Woburn, MA 01801 (US) AL.: "Molten salt electrolytes for electrolytic capacitors" page 1135; (72) Inventors: • J. ELECTROCHEM. SOC. , vol. 142, no. 7, July • KOCH, Victor, R. 1995, pages L116-L118, XP000605411 V.R. KOCH Lincoln, MA 01773 (US) ET AL.: "The interfacial stability of Li with two • NANJUNDIAH, Chenniah new solvent-free ionic liquids" San Diego, CA 92129 (US) • INORG. CHEM., vol. 35, January 1996, pages • CARLIN, Richard, T. 1168-1178, XP000605807 P.
    [Show full text]
  • Effect of Halide Additives on the Hydrogen Desorption of Lithium Amide. Rosalind Davies
    Photo courtesy of James Courtney Effect of halide additives on the hydrogen desorption of lithium amide. Rosalind Davies Hydrogen and Fuel Cells Doctoral Training Centre University of Birmingham, UK H2FC SUPERGEN Researcher Conference, 16th December 2014 [email protected] Outline □ Introduction and Background □ Amide Iodides □ Amide Bromides □ Amide Chlorides □ Amide Fluorides □ Conclusions Introduction to the LiNH2 system This stage requires high temperatures for reversibility Li3N + 2H2 Li2NH + LiH + H2 LiNH2 + 2LiH This stage alone has a gravimetric storage 1 capacity of 6.5 wt.% H2 1Chen, P., et.al., Nature, 2002, 420, 6193 Reaction of lithium halides with LiNH2 forms amide halides LiNH2 + LiCl + LiI + LiBr 3 3 5 Li4(NH2)3Cl Li7(NH2)6Br Li3(NH2)2I 4 Li2NH2Br 3Anderson, P., A., A., et. al., Faraday Discussions, 2011, 151 4Barlage, H., and Jacobs, H., Z. Anorg. Allg. Chem., 1994, 620, 479. 5Matsuo, M., et al., Chem. Mater., 2010, 22, 2702. Adding halides lowers the desorption temperature Lithium amide halide + LiH Temperature programmed desorption Suppression of ammonia release Formation of lithium imide halides, and systems can be rehydrogenated Anderson, P., A., et. al., Faraday Discussions, 2011, 151 Gravimetric effects Adding halides is gravimetrically unfavourable: Li (NH ) Cl 4 2 3 Li7(NH2)6Br Li (NH ) I 3 2 2 this work investigates the lower halide doping limits. Reaction of LiI with 3 LiNH2 12 hours at 150°C 5 Li3(NH2)2I Double-layered hexagonal structure a = 7.09109(5) Å, c= 11.50958(10) Å 5Matsuo, M., et al., Chem. Mater.,
    [Show full text]
  • Spodumene: the Lithium Market, Resources and Processes
    minerals Review Spodumene: The Lithium Market, Resources and Processes Colin Dessemond 1, Francis Lajoie-Leroux 1, Gervais Soucy 1,* , Nicolas Laroche 2 and Jean-François Magnan 2 1 Département de génie chimique et de génie biotechnologique, Université de Sherbrooke, Sherbrooke, QC J1K 2R1, Canada; [email protected] (C.D.); [email protected] (F.L.-L.) 2 Nemaska Lithium Inc., Quebec, QC G1K 3X2, Canada; [email protected] (N.L.); [email protected] (J.-F.M.) * Correspondence: [email protected]; Tel.: +1-819-821-8000 (ext: 62167) Received: 17 April 2019; Accepted: 24 May 2019; Published: 29 May 2019 Abstract: This literature review gives an overview of the lithium industry, including the lithium market, global resources, and processes of lithium compounds production. It focuses on the production of lithium compounds from spodumene minerals. Spodumene is one of the most critical minerals nowadays, due to its high lithium content and high rate of extraction. Lithium is one of the most sought-after metals, due to the ever-growing demand for lithium-ion batteries (LiBs). The data on lithium extraction from minerals is scattered through years of patents, journal articles, and proceedings; hence, requiring an in-depth review, including the comprehension of the spodumene phase system, the phase conversion processes, and the lithium extraction processes. Keywords: lithium review; spodumene processes; thermodynamic of spodumene; lithium extraction 1. Introduction Lithium is the third element of the periodic table. It is the lightest of all solid elements (d = 0.53 g cm 3 at 20 C), has the highest specific heat capacity, the smallest ionic radius of all · − ◦ the alkali metals, and a high electrochemical potential [1].
    [Show full text]
  • Étude Du Polymère Élastomère À Base D'acrylonitrile, HNBR, Pour Son Application Dans Les Batteries Li-Ion
    Université de Montréal Étude du polymère élastomère à base d’acrylonitrile, HNBR, pour son application dans les batteries Li-ion par Nina Verdier Département de Chimie Faculté des arts et des sciences Thèse présentée à la Faculté des études supérieures et postdoctorales en vue de l’obtention du grade de Philosophiae doctor (Ph.D) en Chimie Novembre 2019 © Nina Verdier, 2019 Cette thèse intitulée : Étude du polymère élastomère à base d’acrylonitrile, HNBR, pour son application dans les batteries Li-ion Présentée par : Nina Verdier A été évaluée par un jury composé des personnes suivantes Karen Waldron Présidente du jury Dominic Rochefort Directeur de recherche Mickaël Dollé Co-directeur de recherche Richard Martel Membre du jury Joël Gaubicher Examinateur externe, Institut des Matériaux Jean Rouxel (Nantes) Ahmad Hamdan Représentant du doyen de la FAS Résumé Les travaux présentés portent sur l’étude du HNBR (Hydrogenated Nitrile Butadiene Rubber), un polymère à base d’acrylonitrile, pour son application en tant que liant d’électrodes dans les batteries lithium ions. Cette thèse repose sur un partenariat avec l’entreprise Hutchinson (spécialisée dans le domaine des polymères) qui a cherché à développer un nouveau procédé pour la fabrication des électrodes. Ce procédé par voie fondue a soulevé la problématique du polymère liant utilisé dans les électrodes puisque ce dernier doit être compatible avec le procédé tout en étant utilisable dans des batteries. C’est dans l’optique de trouver et valider un tel polymère que s’inscrit cette thèse sur le polymère HNBR. En premier lieu, nous nous sommes concentrés sur les répercussions du traitement thermique, étape importante du procédé par voie fondue, sur le HNBR.
    [Show full text]
  • University of Birmingham Ammonia Decomposition Catalysis Using
    University of Birmingham Ammonia decomposition catalysis using lithium–calcium imide Makepeace, Joshua W.; Hunter, Hazel M. A.; Wood, Thomas J.; Smith, Ronald I.; Murray, Claire A.; David, William I. F. DOI: 10.1039/c5fd00179j Document Version Early version, also known as pre-print Citation for published version (Harvard): Makepeace, JW, Hunter, HMA, Wood, TJ, Smith, RI, Murray, CA & David, WIF 2016, 'Ammonia decomposition catalysis using lithium–calcium imide', Faraday Discussions. https://doi.org/10.1039/c5fd00179j Link to publication on Research at Birmingham portal General rights Unless a licence is specified above, all rights (including copyright and moral rights) in this document are retained by the authors and/or the copyright holders. The express permission of the copyright holder must be obtained for any use of this material other than for purposes permitted by law. •Users may freely distribute the URL that is used to identify this publication. •Users may download and/or print one copy of the publication from the University of Birmingham research portal for the purpose of private study or non-commercial research. •User may use extracts from the document in line with the concept of ‘fair dealing’ under the Copyright, Designs and Patents Act 1988 (?) •Users may not further distribute the material nor use it for the purposes of commercial gain. Where a licence is displayed above, please note the terms and conditions of the licence govern your use of this document. When citing, please reference the published version. Take down policy While the University of Birmingham exercises care and attention in making items available there are rare occasions when an item has been uploaded in error or has been deemed to be commercially or otherwise sensitive.
    [Show full text]
  • Crystal Structures and Phase Transformation of Deuterated Lithium Imide, Li2nd Michael P
    Journal of Alloys and Compounds 420 (2006) 326–336 Crystal structures and phase transformation of deuterated lithium imide, Li2ND Michael P. Balogh a,∗, Camille Y. Jones b, J.F. Herbst c, Louis G. Hector Jr. c, Matthew Kundrat d a Chemical and Environmental Sciences Laboratory, General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055, United States b NIST Center for Neutron Research, 100 Bureau Drive, Stop 8562, National Institute of Standards and Technology, Gaithersburg, MD 20899-8562, United States c Materials and Processes Laboratory, General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055, United States d Aerotek Corp., 26211 Central Park Blvd., Southfield, MI 48076, United States Received 17 October 2005; received in revised form 3 November 2005; accepted 4 November 2005 Available online 28 December 2005 Abstract We have investigated the crystal structure of deuterated lithium imide, Li2ND, by means of neutron and X-ray diffraction. An order–disorder transition occurs near 360 K. Below that temperature Li2ND can be described to the same level of accuracy as a disordered cubic (Fd3¯m) structure with partially occupied Li 32e sites or as a fully occupied orthorhombic (Ima2orImm2) structure. The high temperature phase is best characterized as disordered cubic (Fm3¯m) with D atoms randomized over the 192l sites. Density functional theory calculations complement and support the diffraction analyses. We compare our findings in detail with previous studies. © 2005 Elsevier B.V. All rights reserved. Keywords: Hydrogen absorbing materials; Crystal structure; Neutron diffraction; X-ray diffraction; Order–disorder effects 1. Introduction hydrogenation, in large part owing to the lack of an accurate crystal structure.
    [Show full text]
  • PROPERTIES and STRUCTURES of Li-N BASED HYDROGEN STORAGE MATERIALS
    Michigan Technological University Digital Commons @ Michigan Tech Dissertations, Master's Theses and Master's Dissertations, Master's Theses and Master's Reports - Open Reports 2013 PROPERTIES AND STRUCTURES OF Li-N BASED HYDROGEN STORAGE MATERIALS Junqing Zhang Michigan Technological University Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Materials Chemistry Commons, and the Physical Chemistry Commons Copyright 2013 Junqing Zhang Recommended Citation Zhang, Junqing, "PROPERTIES AND STRUCTURES OF Li-N BASED HYDROGEN STORAGE MATERIALS", Dissertation, Michigan Technological University, 2013. https://doi.org/10.37099/mtu.dc.etds/579 Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Materials Chemistry Commons, and the Physical Chemistry Commons PROPERTIES AND STRUCTURES OF Li-N BASED HYDROGEN STORAGE MATERIALS By Junqing Zhang A DISSERTATION Submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY In Materials Science and Engineering MICHIGAN TECHNOLOGICAL UNIVERSITY 2013 © 2013 Junqing Zhang This dissertation has been approved in partial fulfillment of the requirements for the Degree of DOCTOR OF PHILOSOPHY in Materials Science and Engineering. Department of Materials Science and Engineering Dissertation Advisor: Yun Hang Hu Committee Member: Jaroslaw W. Drelich Committee Member: Stephen A. Hackney Committee Member: Feng Zhao Department Chair: Stephen L. Kampe Table of Contents List of Figures ..........................................................................................................
    [Show full text]