QUICK USER GUIDE OVERVIEW in Idle Mode: Press and Hold to Record a Memo
Total Page:16
File Type:pdf, Size:1020Kb
Wall Mounting Charging the batteries Press to playback OGM. Charge the batteries for at least 12 hours when charging for In TAM message playback mode: Press to go back to the first time. previous message. MEMO/SKIP FORWARD ( ) QUICK USER GUIDE OVERVIEW In Idle mode: Press and hold to record a memo. Base In TAM message playback mode: Press to skip to next Base message. 1- LCD DISPLAY DOWN/REDIAL LIST (▼) In idle mode: Press to access the redial list. 2- IN USE ( ) : On during a call. In menu mode: Press to scroll down the menu items. 3- RING light ( ) In Phonebook list / Redial list / Call list view mode: Press Flashes when there is an incoming call. to scroll down the list. Steadily on when the answering machine is turned on. Flashes In editing mode: Press to move the cursor one character to when there are new memos or messages in the answering the right. machine. During a call or TAM message playback: Press to decrease 4- MENU/OK ( ) the volume. Insert Photos for speed dial keys In idle mode: Press to access the main menu. 13-ANS ON/OFF ( ) In sub-menu mode: Press to confirm the selection. In Idle: Press to switch the answering machine ON or OFF. In Redial list/Call list: Press to store the number into 14. PLAY/STOP ( / ) Phonebook. In idle mode: Press to playback messages. 5- PHONEBOOK ( ) During TAM message playback: Press to stop playing In Idle: Press to access the phonebook. messages. 6- CALLS (CALL LIST) ( ) 15. DELETE ( ) In Idle mode: Press to access the call list. In TAM message playback mode: Press to delete the current TAM message playback. 7- INT/MUTE/CLEAR ( ) In idle mode: Press and hold to delete all old messages. In main menu mode: Press to go back to idle screen. In sub-menu mode: Press to go back to previous level. 16. RECALL ( ) Handset During a call: Press to activate Recall for use with Telephone In sub-menu mode: Press and hold to go back to idle screen. Network Services such as Call Waiting during a call. In editing / predialing mode: Press to clear a character / digit. !!! Please refer to our website: www.geemarc.com for an During message playback: Press to call back the caller if up to date user guide, as there may be important updates In editing / predialing mode: Press and hold to delete all the the caller’s number is available and changes you need to be aware of !!! character / digits Congratulations on purchasing your Geemarc AMPLIDECT During a call: Press to mute / unmute the microphone. Handset COMBI-PHOTO 295 telephone. This telephone offers all the In ringing: Press to silence the base ringer. advantages of cordless technology (compliant with Digitally In idle mode: Press to intercom another system handset. 17. Incoming Call light Enhanced Cordless Telecommunications-DECT standard) Flashes red slowly when receiving an incoming call. together with an easy to see big button keypad, ideal for 8- MEMORY KEYS those who suffer with poor sight. This telephone is also (3 PHOTO SPEED DIAL KEYS; 1 MEMORY KEY - M4) 18. Earpiece hearing aid compatible. In predial mode: Press and hold to store the number entered 19. Charger/Booster LED ( ) from idle mode. It is important that you read the instructions below in order to - Steady red when the handset battery is charging. use your Geemarc telephone to its full potential. In idle mode: Press to dial out to the number stored in the - Long flashes in red when the handset battery is low. memory key. - Flashes red quickly when handset registration is in progress. PACKAGE CONTENTS 9- VOLUME BOOST ( ) - Flashes red slowly when the handset is not registered or not 1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 During a call: Press to activate/deactivate the VOLUME in charger. power adapter, 1 Charger, 1 Telephone line cord, 1 NiMh BOOST function. - Steady blue when the booster function is activated. battery pack, 1 Quick user guide. 10- SPEAKER ( ) 20. Photo speed dial keys INSTALLATION In Idle mode or Phonebook/ Call list/ Redial list view mode: Your handset has four photo speed dial keys. It retrieves the Press to make a call with speakerphone. same set of photo or Direct Memory speed dial entries stored Connecting the telephone in the AMPLIDECT295 or AMPLIDECT COMBI 295. 11- ALPHANUMERIC KEYPAD, STAR ( ), HASH ( ) Connect the telephone cable to the telephone line socket (A) In predial or editing mode: Press to insert a digit. Press to dial a preset number. Connection and to the telephone wall socket (B). 0 key in predial or editing mode: Press and hold to insert a 21. Talk ON / Flash ( ) Connect the handset curly cord to the base. pause. Connect the power adapter jack to base and charger (C) then - Make or answer a call. connect the power adapter plug in mains power (D). 12- NAVIGATION KEYS - Light Green when the handset is on earpiece mode. Note: Use only the power adapters supplied with the phone. UP ( ▲ ) - During a call, Press to access Recall feature (R). In menu mode: Press to scroll up the menu items. Connecting the battery In Phonebook list / Redial list / Call list: Press to scroll up 22. TALK OFF ( ) Plug the battery connector the list. - Hang up a call. securely into the socket inside the In editing mode: Press to move the cursor one character to - Silence the ringer temporarily while the phone is ringing. handset battery compartment. the left. - Mute the paging tone. Insert the supplied battery as During a call or TAM message playback: Press to increase the indicated. volume. 23. SPEAKER ( ) - Make or answer a call using the speakerphone. Align the cover flat against the REPEAT/OGM ( ) battery compartment, and then slide it upwards until it clicks - Switch between the speakerphone and the earpiece. In Idle mode: Press and hold to record OGM. into place. - Light Orange when on speakerphone mode. 1 2 3 4 24. Microphone Using a picture memory ANSWERING MACHINE IMPORTANT : YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED AND PRODUCED 25. Charging pole Press and hold the memory button, the handset dials the Your telephone base includes a telephone answering machine memory number and the handset is in speakerphone mode. IN THE EVENT OF A WARRANTY CLAIM. 26. Speakerphone that records unanswered calls when it is on. The answering machine can store up to 59 messages within the maximum Please note: The guarantee applies to the United 27. Battery compartment cover REGISTRATION & DE-REGISTRATION recording time of approximately 15 minutes. As well as Kingdom only. 28. VOL+ ( ) Note: Handset and base station are pre-registered. recording incoming messages, you can record memos for other - Increase the listening volume up to 30dB amplification, (Or Up to five handsets can be registered to a single base station. users of your phone. DECLARATIONS: the ringer Volume when in quiescent mode). In the case of re-registration, the PIN code is 0000. Press ANS ON/OFF to switch the answering machine - Switch On/Off the receiver Booster function (LED blue). CE Directives ON or OFF Geemarc Telecom SA hereby declares that this product is in 29. VOL- ( ) Registration a photo handset compliance with the essential requirements and other relevant Remote operations Decrease the listening volume. (Or the ringer volume when in Base: First place the base of the AMPLIDECT295 or AMPLIDECT provisions of the Radio and Telecommunications Terminal quiescent mode (until ringer turn OFF)). COMBI 295 in Registration mode. If you are away from your home, you can call your answering Equipment Directive 2014/53/UE. machine to switch on or off the answering machine and listen Replace photo handset back on the charging pod, the red LED to your messages remotely using another tone-dialing phone. The CE declaration of conformity may be consulted at MENU SETTING flashes quickly to indicate registration in process. www.geemarc.com 1. Place a call from a tone-dialing phone. The phone settings are always set in the same manner: You will hear a confirmation beep when the registration process completes. It takes up to 60 seconds to complete the registration. 2. When the answering machine answers the call and starts Electrical connection: Base: Press Menu/OK button to open the main menu. playing OGM, press . The apparatus is designed to operate from a 230V 50Hz Then use the ▼▲buttons to select an entry and confirm it by Note: if the handset doesn’t arrive un registered, please supply only. (Classified as hazardous voltage according to 3. Enter the 4-digit Remote Access PIN (default PIN is 0000). pressing the Menu/OK button. follow this procedure: EN60950 standard). The apparatus does not incorporate an 4. Press the following keys to carry out your desired function. Handset: Quickly press [VOL+] [SPK] [VOL-] [SPK] [VOL+] integral power on/off switch. To switch off the apparatus, The factory preset PIN code is 0000 [VOL-] [SPK] in idle mode, then HS will have a "Bi,Bi" tone. A Functions disconnect the power adaptor. Example: While message is not While message is playing When installing the apparatus, ensure that the mains power Registration a standard handset playing socket is readily accessible. Set the language on the base On Handset: Press MENU/OK select ▼▲ REGISTRATION, Delete the current message Press MENU / OK, then use ▼▲to select LANGUAGE, 2 Telephone connection: Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK playback press MENU / OK , then use ▼▲ to select the desired Voltages present on the telecommunication network are enter PIN. Repeat playing the current language and then press MENU / OK to confirm.