Road Kit General Trailer 1. Jack,Or Ramp Style Lift. 2. Lug Wrench, to Fit Trailer 3. Good Spare Tire to Fit Trailer 4. Broom

Total Page：16

File Type：pdf, Size：1020Kb

Road Kit General Trailer 1. Jack,or ramp style lift. 2. lug wrench, to fit trailer 3. good spare tire to fit trailer 4. broom and shovel 5. “channel lock” pliers (10 or 12 “) 6. multipoint screwdriver 7. wire cutters/pruning shears 8. roll 3/4” electrical tape/duct tape 9. ball nylon string and 6’ #14 insulated wire 10. spray lube( Tri- Flo ) 11. Box heavy duty 10 gal. trash bags 12. 30 to 50 ‘ 1/2 nylon rope 13. spare halter ,lead 14. hoof pick,grooming supplies 15. 5 gal. bucket with lid . Optional Items In trailer 1. special tools as necessary. 2. hoof rasp . nippers,knife 3. shoeing hammer 4. shoe nails (in small plastic jar) 5. or a set of pre fitted Easy Boot First Aid 1. General first aid kit in closed container plus; 2. Tweezers,scissors,needles. 3. sealed bottle Hydrogen Peroxide 4. 1 lb. baking soda (in sealed container) 5. Corona ,or similar ointment 6. hand towels (in zip lock bags) 7. bar,liquid soap or handy wipes 8. 4 rolls “ vet wrap” 9. Any special medications YOU need. on your person 1. Disposable lighter 2. Leather-man tool ,1 trash bag( 30 gal) 3. Medical ID card 4. Money/credit card,paper pencil 5. riding helmet 6. Cell phone/radio Road Kit in truck 1. 10BC fire extinguisher (store on side) 2. Set warning triangles 3. Package of 3 15 minute flares The above is required on commercial vehicles 4. Jack,lug wrench and spare to fit truck 5. leather/cotton gloves 6. good work light with batteries,or plug in to truck power outlet 7. Spare bulbs,fuses for truck and trailer 8. Tire pressure gage 9. handy wipes or hand cleaner and rag 10. Wheel chocks or 4x4 wood blocks 11. 20 ft. tow strap These are just a starting point add or change to fit conditions .

Copy Link

Recommended publications

Catalog KT0117 Supersedes Catalog No
Catalog KT0117 Supersedes Catalog No. KT0915 About Ken-Tool Ken-Tool is the leading manufacturer of tire service tools in the world. Headquartered in Akron, Ohio, Ken-Tool has been providing the tire industry and automotive aftermarket with quality products for over 97 years. A lot of change has occurred within Ken-Tool over the years. But its long-time tag-line, "Wherever Tires Are Changed", has held true. Ken-Tool's brand name and reputation remain the best in the tire- service industry, and it is the passion of the company's leaders to make sure that continues to be true in the years ahead. Housed in a 70,000 square foot facility, Ken-Tool is a primary manufacturer of hand-tool products, with its manufacturing expertise centered on drop hammer, up-setter and press forgings. The company goes to market through the traditional aftermarket distribution network. It is Ken-Tool’s policy to deliver defect-free products to our customers on time, every time. Ken-Tool is committed to meeting these objectives, and satisfying applicable requirements, by continually improving our business operating system and processes. We expect to be identified by our customers as #1 in terms of quality and delivery performance. Ken-Tool is proud to announce that they were re-certified on December 15, 2016 with the current ISO 9001:2015 standards for quality management systems. ISO is the world’s most widely used quality assurance procedural guidelines, and lays the groundwork for an organization’s development of a uniform set of procedures to establish, monitor and ultimately control product or service quality.
[Show full text]
1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
[Show full text]
Joint Discovery of Object States and Manipulation Actions: Additional Example of SVM Results
Joint Discovery of Object States and Manipulation Actions: Additional example of SVM results Jean-Baptiste Alayrac∗ Josef Sivic∗ Ivan Laptev∗ Simon Lacoste-Julieny This file contains additional examples of visualization of our text based clip retrieval. For each action we give the visu- alization for the top 5 scoring clips. Recall that these figures should be “read” as follows. We display the narration of the video that is obtained from Automatic Speech Recognition (ASR). The text is highlighted with different colors. These colors correspond to the score of the SVM that has been trained to detect sentences which refer to the action of interest. More precisely, for each word, we compute the average score over all the windows that contain it. Red indicates high score, blue indicates low score. Note also that the coloring range is normalized for the range of scores within each video. The shown frames correspond to the top scoring part of the narration. Contents A.Action: “put wheel on the car” 2 B. Action: “remove the wheel from the car”6 C.Action: “pour coffee inside a cup” 11 D.Action: “open an oyster” 15 E. Action: “place a plant inside a pot” 16 ∗WILLOW-SIERRA project-teams, Departement´ d’Informatique de l’Ecole Normale Superieure,´ ENS/INRIA/CNRS UMR 8548, Paris, France. yDepartment of CS & OR (DIRO), Universite´ de Montreal,´ Montreal.´ 1 A. Action: “put wheel on the car” 2013 toyota corolla the first thing you want to do is to make sure the cars in part to make sure the emergency brake is applied we do n’t want the car rolling away
[Show full text]
MAKING an IMPACT Impact Drivers May Look Like Small Drills, but the Similarity Ends There
{ PRODUCT REVIEW } MAKING AN IMPACT Impact drivers may look like small drills, but the similarity ends there. For decades, auto mechanics have enjoyed their high torque and unchallenged superiority in installing – and removing – fasteners with ease. As the same technology spreads to woodworkers, we’ll show you why you’ll want one in your shop. BY TIM RINEHART Panasonic Makita DeWalt Ridgid Hitachi Bosch Black & Decker EVERY NOW AND THEN A NEW TOOL COMES ALONG THAT CHANGES THE WAY WE PERFORM SOME TASK. A tool that, after you first try it, any true tool junkie absolutely has to own one. The cordless impact driver is one of those tools. When I opened the case of the first sample to arrive I thought it looked like a wimpy little drill/driver wannabe. The compact little motor couldn’t have enough power and torque to do real work, so what could I do with this thing that any of my collection of drill/drivers won’t do? The answer turned out to be drive screws and lag bolts – lots of them – into everything I could find just for the fun of it. Impact drivers use completely different mechanics than a standard drill/driver to deliver driving force. (See sidebar “How it works” on page 83) Under load, a spring is compressed which drives a hammer into an anvil to multiply torque. The extra torque is great, but there’s great side effect too: The millisecond space between impacts also lets screwdriver bits reseat themselves to full engagement with the screw head, virtually eliminating cam-out and stripped screws.
[Show full text]
Dexter D44 Axle May Be Missing Race
Dexter D44 axle may be missing Race Recall: Jayco 18V-618 2018-514 Publication Date: October 2018 Highland 18V-616 2018-515 Job Code: Jayco 9901410 Inspection ONLY - each axle hub Make: Jayco assembly (2 per axle) – Photo of each axle serial number Highland Ridge tag is required ( 2 per unit) 9901411 Inspection of each axle hub assembly (2 per axle) – Photo of each axle serial number tag is required ( 2 per unit) and a photo of incorrect gap is required with authorization prior to replacing an axle. Highland 9904410 Inspection ONLY (limit 2)- Photo of each axle serial number tag is required ( 2 per unit). 9904411 Inspection of each axle hub assembly (2 per axle) – Photo of each axle serial number tag is required ( 2 per unit) and a photo of incorrect gap is required with authorization prior to replacing an axle. Inspection ONLY: .5 hr per axle ( 2 hub assemblies per Model: Whitehawk Flat Rate: axle ) Jayflight Inspection and Replace Axle: 1 hr per axle (limit 2 axles Open Range UL per unit) Open Range Light Mesa Ridge Model Year: 2019 Dexter D44 axle may be missing Inner/Outer Bearing Cup (Race) INCIDENT 2019 White Hawk K14A0141-0200 K14D0081-086 K14E0081-0086 K14H0050 K14K0051-0080 K14L0141-170 K14Y0081-0098 K14Z0087-0098 2019 Jay Flight SLX K17M0081-0116 AFFECTED UNITS 2019 Jay Flight K1TC0141-0260 K1TD0141-0230 K1TN0111-0128 K1TZ0113-0170 2019 Open Range UL K3UJ3114-3128 2019 Mesa Ridge K3MV3069-3073 2019 Open Range Light K3TJ3069-3073 1/4" Allen wrench MISC. TOOLS & Floor jack, jack stands, impact driver and 3/4" impact socket, torque wrench (ft/lbs.) SUPPLIES Preparation for Inspection of D44 Hub –Drum assemblies 1.
[Show full text]
TIRE REPAIR Compressors Tire • Portable • Fast 5 Minute Fill-Time COMPRESSORS • 12 Volt with 10 Ft
TIRE REPAIR Tire Compressors • Portable • Fast 5 minute Fill-time COMPRESSORS • 12 Volt with 10 ft. Power Cord • 14 in. Air Hose w/Twist-on nozzle & Bleeder Valve • Dial Pressure Gauge • Rapidly Inflates Tires with Professional Power Bell Automotive BellAire 2000 • Portable Tire Inflator VIC 22-1-32000-8 • Fast 3 min. Fill-time • 12 Volt with 15 ft. Power Cord • Dial Pressure Gauge Victor QuikAire 6500 Rapid Pro Tire Inflator VIC 22-5-76500-8 • Portable • Fast 5 Minute Fill-time • 12 Volt with 8 ft. Power Cord • 4 in. Air Hose w/Twist-on nozzle • Dial Pressure Gauge • Portable Bell Automotive BellAire 1000 • Fast 2-3 Minute Fill-time Tire Inflator VIC 22-1-31000-8 • 12 Volt with 10 ft. Power Cord • 2 ft. Air Hose w/Twist-on nozzle & Bleeder Valve • Dial Pressure Gauge Bell Automotive BellAire 6000 Tire Inflator VIC 22-1-36000-8 • Portable • 10 Minute Fill-time • 12 Volt with 10 ft. Power Cord • 4 in. Air Hose w/Twist-on nozzle • Dial Pressure Gauge Bell Automotive BellAire 500 • Rapidly Inflates Tires with Professional Power Tire Inflator VIC 22-1-30500-8 • Portable • Fast 4 min. Fill-time • 12 Volt with 10 ft. Power Cord • Dial Pressure Gauge Victor QuikAire 4500 Rapid Pro Tire Inflator VIC 22-5-74500-8 • Use on Victor QuickAire tire inflators ONLY • 10' 12 volt cord • 18 Gauge Victor 12 Volt Tire Inflator Power Cord Extension VIC 22-5-70150-8 • Portable • Fast 5 Minute Fill-time • 12 Volt with 10 ft. Power Cord • 2 ft. Air Hose w/Twist-on nozzle & Bleeder Valve • Digital Pressure Gauge with Auto Shut-off TIRE REPAIR Bell Automotive BellAire 5000 Tire Inflator VIC 22-1-35000-8 TIRE PUMPS • Tire pump, hand pump, inflation • Portable • 70 PSI capacity • Fast 5 Minute Fill-time • 18" Long hose • 12 Volt with 10 ft.
[Show full text]
Loose Lug Nuts Result in One Near Miss and One Dual Wheel Set Bouncing Through Traffic on Two Ford 550 Type 6 Engines Within Two Days
Event Type: Engine Lug Nut Loosening Date: June 18 and 20, 2019 Location: Rocky Mountain Region – Grand Mesa, Uncompahgre and Gunnison National Forests; Medicine Bow-Routt National Forests; and This has happened before! Thunder Basin National Grassland See page 4 for more lessons from similar incidents. Loose lug nuts result in one near miss and one dual wheel set bouncing through traffic on two Ford 550 Type 6 Engines within two days. Wheels Bouncing Past the Engine While on assignment in southern Colorado to assist with prescribed burning, the Type 6 Engine (Engine #1) departed for the burn unit on Tuesday morning, June 18, The crew members in the Chase Truck traveling down the highway about 60 mph. were surprised to see the rear wheels start to wobble. They tried both the radio and Following behind, the crew members in the Chase Truck the cell phone, but were not able to were surprised to see the rear wheels start to wobble. contact the Engine before the dual wheels came off. They tried both the radio and the cell phone, but were not able to contact the Engine before the dual wheels came off. Rotor Mark The driver felt the Engine drop, as if the rear end had hit a hole. The driver’s side, rear outside dual wheel shot across the oncoming traffic lane and off the road. The inside dual wheel bounced into the other lane, into the ditch, back onto the highway in front of an oncoming car, Rotor mark (see blue arrows) on left side of highway where the and back into the ditch—narrowly missing the car.
[Show full text]
Instructional Objective Defined, Examples, Practice Writing
The Competent Instructor Instructional Objective Defined, Examples, Practice Writing Definition An instructional objective is a definition of a working task that a worker must be competent to do after completing a course of instruction. The definition includes these critical parts: • who performs the task, • task output resulting from worker’s expected behaviors, • observable behaviors while worker is performing the task, and • task input that the worker requires to perform the task, including – – incentive to perform the task, – standards for customer acceptance of task output, – data and information beyond procedural actions, – material resources besides data and information, – equipment, machines, and tools, – timeframe, and – work site. Enabling vs. Instructional designers distinguish between enabling objectives and terminal terminal objectives. This table defines and lists examples for both enabling objectives objectives and terminal objectives. Definition Examples An enabling objective defines • To pass the driver’s exam, a task that the learner must the learner must correctly tag six of eight master during training. basic road signs within five minutes. Note: The task is usually one of a set • Given tags for 10 hazardous materials, of tasks which, when the the learner must match them correctly learner puts them all together, to the products listed in the lab manual, enables the learner to perform within five minutes. a working task. A terminal objective defines All the examples on the next page are what the learner must be terminal objectives, not enabling objectives. competent to do back at work Note: A terminal objective may require after training terminates. the learner to master several enabling objectives. FileName:objective_defined.doc © 1995 – 2007 Thomas D.
[Show full text]
Catalog of Wrenches for the Antique Wrench & Tool
CATALOG OF WRENCHES FOR THE ANTIQUE WRENCH & TOOL AUCTION SATURDAY, SEPT. 26 AT THE CLARION HOTEL & CONFERENCE CENTER 5202 North Brady Street - DAVENPORT, IOWA AUCTION STARTS AT 11: AM Saturday (approximately one half hour after Wrench Club Meet ends) Auction is open to the public CONTACT INFORMATION Auction Manager: Absentee Bids: Don 'Bus' Haury Stan Schulz 7913 SW 24th - Halstead, KS, 67056 659 E 9th - York, NE 68467-3109 316-284-7345 or 316-283-5876 402-362-7686 [email protected] [email protected] This auction originated as a consignment auction and we have received consignments from several people including Dough Busch who will be selling his collection over the next couple years, Dan Gaier, Don Ervin and Robert Matz. The bulk of the auction consists of the collection of Wilbur Hall of Wagner, South Dakota, His collection consists of several hundred wrenches and hammers and is especially strong in combination type tools. The hammers will be sold by The Great Planes Trading Company at auction in October in St. Louis. There will be a catalog on the Great Planes Trading Company Website at www.greatplanestrading.com by mid August. Terms of the sale: All bids & settlement in U.S. Currency. Cash or check with proper id. No items to be removed until settled for. Auction Co. & owners shall not be responsible for any accident or loss. Sold as is where is. No guarantees or warranties expressed or implied. Statements made sale day will take precedence over any printed ad. We are not able to accept credit cards at this auction.
[Show full text]
Trip Parts and Tools - Before Any Trip in a Corvair, the Following Steps Should Be Taken Credit to Bill Pierson for Presenting This List L
Trip Parts and Tools - Before any trip in a Corvair, the following steps should be taken Credit to Bill Pierson for presenting this list l. Tune-up, points, condenser, cap, rotor, plugs, plug wires ,fuel filters, carburetors cleaned. Tune to specs in shop manual, adjust carbs to specs. Check the hot wire to coil and wire to distributor, they are usually brittle. 2.Check all fluid levels, brake, steering, differential, pg. 3. Pull wheels and check brakes for wear, wheel cylinders for seeping fluid 4.Pack front wheel; bearings, rear axle bearings if possible. 5.Inspect universal joints by moving axles .Listen for any squeaking noise while driving. 6.Look for oil leaks at engine, transmission and differential. Repair all leaks. 7.Check tires for wear, check air pressure front and rear. Most like a 10 # difference front to rear. 8.Change oil and filter. 9.Inspect fan belt, replace if any wear. 10.Check battery and cables, remove cables and clean. 11. Check seat belts. 12.Check fire extinguisher. 13.Check all accessories that you want to use on the trip, radio, heater, ac, cb radio, cell phone jack 14.List the parts and tools you may need .Get a tool box sufficient to hold them. l5.Make sure the jack is in working order and the spare is inflated to rear tire pressure. You may deflate it some to use on the front. PARTS AND TOOLS l. CORSA Roster, the new roster will be available in the next month. 2.Fan belt, store flat in tool box, not coiled.
[Show full text]
PRODUCT CATALOG KT20210602 Supersedes Catalog No
2021 PRODUCT CATALOG KT20210602 Supersedes Catalog No. KT20201102 Ken-Tool’s 100,000 Square Foot Akron, Ohio Facility HERITAGE WHEREVER, WHENEVER TIRES ARE CHANGED... A lot of change has occurred within Ken-Tool over the years, from its beginning with the innovative Pacific Rim Tool, through a variety of other product lines, affiliations, and ownerships. Throughout that period, its long-time slogan, “Wherever Tires Are Changed,” has held true. Ken-Tool’s brand name and reputation has been the best in the tire-service industry, and its leaders strive to make sure that remains true for years to come. 1920 John A. 1926 Over 100,000 1938 Kennedy leaves 1943 Ken-Tool earns 3 Army 1956 Frank 1959 Lydle 1970 Ken-Tool becomes 1972 The Kennedy brand of 1994 All other 2019 Ken-Tool Kennedy now-famous the business in Navy “E” Awards for Kemmerline combines one of the original product is discontinued for Warren Tool Launches invents the Pacific Rim Tools pursuit of new development of special tool sells the Kennedy members of the Cooper good. The Ken-Tool line is operations are Ken-Tool Cares Pacific Rim are shipped from opportunities, joins to remove tires from rims of Cornwell Tool and Tool Group, along now 95% product of its own sold, leaving initiative Tool. the Ohio plant. John Lydle of The B-29 bombers, forged firing Company. Ken-Tool with Crescent hand manufacture, one brand, and Ken-Tool as Rittman Tool and pins for large guns and product tools, Weller soldering a springboard to sell other an entirely Forge Company to wheel tools for jeeps and lines.
[Show full text]
59 Trunk Mat
Thread: 59 Trunk mat Pat Heimrath (28537) 59 Trunk mat I just purchased a new trunk mat for my 59 from one of the major suppliers at Carlisle. It looked close to what an original looks like so I bought it. When I installed it the left side, lug wrench clip is covered by the mat and I don't want to cut it as I will probably return it. I've also check 2 other C-1's at 58 and an early 60 and they are not formed on the left side like the later 60 and give you enough space to screw down the clip for the wrench. Is there any making a proper mat? Has anyone else experienced this? 1. September 4th, 2014, 08:03 PM #2 Dan Bachrach (53579) Re: 59 Trunk mat The mats did change around mid 60, but I believe that was the front of the mat as it faces the trunk partition. I always thought the clip and handle were covered by the mat. I am sure someone will chime in if this is wrong. Dan 2. September 4th, 2014, 09:40 PM #3 Joe Maulsby (17166) Re: 59 Trunk mat The mat you purchased is not made correctly. The lug wrench clip should not be covered by the trunk mat. All of the mats currently being reproduced have their flaws, but I have not seen that one. 3. September 5th, 2014, 03:44 PM #4 Dan Bachrach (53579) Re: 59 Trunk mat Just looked at mine again, which is an older AK reproduction and the jack handle clip on the right side is not covered (but the handle is) and on the left side the lug wrench clip IS covered.
[Show full text]