Network Protocols Configuration Guide Part
Total Page:16
File Type:pdf, Size:1020Kb
NETWORK PROTOCOLS CONFIGURATION GUIDE PART Cisco lOS Release 12.0 APPLETALK NOVELL IPX Documentation also available on CD-ROM and the World Wide Web Cisce SYSTEMS Network Protocos Configuration Guide Part Cisco lOS Release 12.0 AppleTalk Novell IPX Corporate Headquarters Cisco Systems Inc 170 West Tasman Drive San Jose CA 95134-1706 USA http//www.cjsco.com Tel 408 526-4000 800 553-NETS 6387 Fax 408 526-4100 Customer Order Number DOC-785832 Text Part Number 78-5832-01 SUBJECT TO CHANGE WITHOUT THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE TO BE ACCURATE BUT ARE NOTICE ALL STATEMENTS INFORMATION AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED RESPONSIBILITY FOR THEIR PRESENTED WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED USERS MUST TAKE FULL APPLICATION OF ANY PRODUCTS FORTH IN THE INFORMATION THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET ARE UNABLE TO PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE IF YOU LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY CONTACT YOUR CISCO REPRESENTATIVE FOR COPY has been tested and found to with Ihe limits for Class The following information is for FCC compliance of Class devices This equipment comply when the to 15 of the FCC rules These limits are to reasonable protection against harmful interference digital device pursuant part designed provide and used is in commercial environment This uses and can radiate radio-frequency energy and if not installed equipment operated equipment generates communications of this in residential area is in accordance with the instruction manual may cause harmful interference 10 radio Operation equipment harmful in which case users will be to correct the interference at their own expense likely to cause interference required described in this and radiate is for FCC of Class devices The manual generates may radio-frequency The following information compliance equipment installed in accordance with Ciscos installation instructions it cause interference wilts radio and television reception This equipment energy If it is nol may with the in 15 of the FCC rules These has been tested and found to comply with the limits for Class digital device in accordance specifications part reasonable such interference in residential installation However there is no guarantee that specifications are designed to provide prolection against installation interference will not occur in particular without Ciscos written authorization result in the no longer complying svith FCC requirements for Class or Modifying the equipmelsl may equipment be limited and maybe rcquired to correct any interference Class digital devices In that event your right louse the equipment may by FcC regulations yosi communications to radio or television at your own expense it off If the interference it was probably caused by the Cisco equipnsent You can determine whether your equipment is causing interference by turning stops interference to radio or television to correct the interference by using one or more of or one of its peripheral devices If the equipment causes reception try the following measures Tons the television or radio antenna until the interference stops radio Move the equipment to one side or the ottser of tlse television or radio Move the equipment farltser asvay from the television or television or radio is make certain the equipment and tIme television or radio Plug the equipment into an outlet that is on different circuit from the That are on circuits controlled by different circuit breakers or fuses could void the FCC and authority to the product Modifications to this product not authorized by Cisco Systems Inc approval negate your operate of the University of California Berkeley as part of The Cisco implementation of TCP header compression is an adaptation program developed by UCB of of California reserved Copyright 1981 the University UCB public domain version of the UNIX operating system All riglsts Regents NOTWITHSTANDING ANY OTHER WARRANTY HEREIN ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES EXPRESSED FOR PARTICULAR PURPOSE AND OR IMPLIED INCLUDING WITHOUT LIMITATION THOSE OF MERCHANTABILITY FITNESS NONINFRINGEMENT OR ARISING FROM COURSE OF DEALING USAGE OR TRADE PRACTICE IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT SPECIAL CONSEQUENTIAL OR INCIDENTAL OUT OF THE USE OR DAMAGES INCLUDING WITHOUT LIMITATION LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING SUPPLIERS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES INABILITY TO USE THIS MANUAL EVEN IF CISCO OR ITS HAVE Cisco CiscoLink the Cisco Net Works logo the Cisco Powered AccessPalh Any to Any AlmDirector the CCIE logo CD-PAC Centri the Capital logo Fast FireRunner IGX lOS JumpStart Kernel Network logo the Cisco Press logo the Cisco Technologies logo ClickStart ControlStream DAGAZ Step Proxy LoopRunner MGX Natural Network Viewer NetRanger NetSonar Packet PIX Point and Click Internetworking Policy Builder RouteStream TransPath VirtualStream VlanDirector Workgroup Director Secure Script SMARTnet SpeedRunner Stratm StreamView The Cell TrafficDirector The Internet and Workgroup Stack are trademarks Changing the Way We Work Live Play and Learn Empowering the Internet Generation Economy Cisco the Cisco lOS Cisco the Cisco Systems logo and The New Internet Economy are service marks and BPX Catalyst Cisco lOS logo Systems Phase/IP StrataViesv Plus and Enterprise/Solver EtherChannet FastHub ForeSight FragmenlFree IP/TV IPX LightStream MICA StrataSphere and certain other countries All other trademarks mentioned in this document are SwitchProbe are registered trademarks of Cisco Systems Inc in the U.S of their owners the property respective 9809R Netmmork Protocols Configuration Guide Part Copyright 1998 Cisco Systems Inc All rights reserved Printed in USA CONTENTS About the Cisco lOS Software Documentation xvii Documentation Objectives xvii Audience xvii Documentation Organization xvii Documentation Modules xvii Master Indexes xvii Documentation Set xviii Supporting Documents xix Document Conventions xix Command Syntax Conventions xx Cisco Connection Online xx Documentation CD-ROM xxi Using Cisco lOS Software xxiii Getting Help xxiii Example How to Find Command Options xxiv Understanding Conmiand Modes xxvi Summary of Main Command Modes xxvii Using the No and Default Forms of Commands xxviii Saving Configuration Changes xxviii AppleTalk and Novell IPX Overview P2C-1 AppleTalk P2C- Background on AppleTalk P2C-1 Ciscos Implementation of AppleTalk P2C-2 Supported Media P2C-2 Standard AppleTalk Services P2C-2 Enhancements to Standard AppleTalk Services P2C-3 Security P2C-4 Novell IPX P2C-4 Background on Novell IPX P2C-4 Cisco Implementation of Novells IPX P2C-4 IPX MIB Support P2C-4 IPX Enhanced IGRP Support P2C-5 LANE Support P2C-5 VLAN Support P2C-5 Configuring AppleTalk P2C-7 AppleTalk Phases P2C-7 AppleTalk Phase P2C-7 AppleTalk Phase P2C-7 Types of AppleTalk Networks P2C-7 Contents iii Networks P2C-8 Comparison of Nonextended and Extended and Network P2C-8 Relationship Between AppleTalk Phases Types Phases P2C-8 Comparison of AppleTalk Phases P2C-9 Cisco-Supported AppleTalk AppleTalk Addresses P2C-9 Network Numbers P2C9 AppleTalk Phase Network Numbers P2C-9 AppleTalk Phase Network Numbers P2C-9 Node Numbers P2C-l0 AppleTalk Phase Node Numbers P2C-10 AppleTalk Phase Node Numbers P2C-10 AppleTalk Address Example P2C- 10 AppleTalk Zones P2C-10 AppleTalk Phase Zones P2C-l0 AppleTalk Phase Zones P2C-10 and Rules P2C- 10 Configuration Guidelines Compatibility Combining AppleTalk Phasel and Phase Routers P2C-1 Combining Cisco Routers with Other Vendors P2C- 11 AppleTalk Configuration Task List P2C- 11 Enable AppleTalk Routing P2C-12 Enable AppleTalk Routing Task List P2C-12 Enable AppleTalk Routing P2C-12 P2C-12 Configure an Interface for AppleTalk 13 Manually Configure an Interface P2C Dynamically Configure an Interface P2C- 13 Select an AppleTalk Routing Protocol P2C-15 16 Configure Transition Mode P2C Enable Concurrent Routing and Bridging P2C- 16 P2C-16 Configure Integrated Routing and Bridging P2C- 17 Control Access to AppleTalk Networks Types of Access Lists P2C-17 P2C-17 AppleTalk-Style Access Lists IP-Style Access Lists P2C-18 Entries P2C- 18 Combining AppleTalk-Style and IP-Style Types of Filters P2C- 18 Implementation Considerations P2C- 19 Task List P2C-20 Control Access to AppleTalk Networks Create Access Lists P2C-20 Set Priority Queuing P2C-20 Automatic Fast Switching P2C-20 Create AppleTalk-Style Access Lists P2C-20 Create IP-Style Access Lists P2C-21 Create Filters P2C-22 Create NBP Packet Filters P2C-22 Create Data Packet Filters P2C-23 Create Routing Table Update Filters P2C-23 iv Network Protocols Configuration Guide Part Create GetZoneList GZL Filters P2C-24 Enable ZIP Reply Filters P2C-25 Enable Partial Zone Filters P2C-26 Configure the Name Display Facility P2C-26 Set Up Special Configurations P2C-26 Configure AURP P2C-27 Configure Free-Trade Zones P2C-28 Configure SNMP over DDP in AppleTalk Networks P2C-29 Configure AppleTalk Tunneling P2C-29 Configure AppleTalk MacIP P2C-30 Cisco Implementation of AppleTalk MacIP P2C-30 When to Use AppleTalk MacIP P2C-30 Advantages of Using MacIP P2C-3 Implementation Considerations P2C-3 Configure AppleTalk MacIP Task List P2C-32 Establish MacIP Server for Zone P2C-32 Allocate IP Addresses for Macintosh Users P2C-32 Configure IPTalk P2C-33 Configure IP Encapsulation of