RF + HF Connector
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Ultrasonic Transducers WEDGES, CABLES, TEST BLOCKS
PANAMETRICS Ultrasonic Transducers WEDGES, CABLES, TEST BLOCKS • Contact • Dual Element • Angle Beam • Shear Wave • Delay Line • Protected Face • Immersion • TOFD • High FrequencyHigh Frequency • Atlas European Standard Atlas European Standard 920-041E-EN The Company Olympus Corporation is an international company operating in industrial, medical and consumer markets, specializing in optics, electronics and precision engineering. Olympus instruments contribute to the quality of products and add to the safety of infrastructure and facilities. Olympus is a world-leading manufacturer of innovative nondestructive testing and measurement instruments that are used in industrial and research applications ranging from aerospace, power generation, petrochemical, civil infrastructure and automotive to consumer products. Leading edge testing technologies include ultrasound, ultrasound phased array, eddy current, eddy current array, microscopy, optical metrology, and X-ray fluorescence. Its products include flaw detectors, thickness gages, industrial NDT systems and scanners, videoscopes, borescopes, high-speed video cameras, microscopes, portable x-ray analyzers, probes, and various accessories. Olympus NDT is based in Waltham, Massachusetts, USA, and has sales and service centers in all principal industrial locations worldwide. Visit www.olympus-ims.com for applications and sales assistance. Panametrics Ultrasonic Transducers Panametrics ultrasonic transducers are available in more than 5000 variations in frequency, element diameter, and connector styles. With more than forty years of transducer experience, Olympus NDT has developed a wide range of custom transducers for special applications in flaw detection, Visit www.olympus-ims.com to receive your free weld inspection, thickness gaging, and materials analysis. Ultrasonic Transducer poster. Table of Contents Transducer Selection . 2 Immersion Transducers .........................20 Part Number Configurations ......................4 Standard................................ -
DCH6200 Specification Sheet
MODEL DCH6200DCH6200 ANALOG/DIGITAL, HDTV, M-CARD™ HOST SET-TOP DCH6200 , M op T - t - t log , HD A l t na Se / ts a dV i ™ Ho g C r i D a The Motorola DCH6200 analog/digital HD Host set-top provides a full set of SDTV, HDTV, and data features and interfaces. In addition to high-definition digital video, the DCH6200 provides superior analog picture quality with dual-channel 3-D comb filters and motion- compensating noise reduction. The DCH6200 supports a wide range of current and future interactive applications running on Motorola’s existing DCT legacy APIs. Features M-Card (Multi-stream CableCARD) Host support for Single-channel MPEG-2 encoder for analog content conditional access Dolby™ Digital 5.1 and PCM audio Compatible with Motorola DCT legacy APIs 32 MB Flash (standard) Standard-definition (SD), enhanced-definition (ED), and high-definition (HD) MPEG-2 video support with output 128 MB DRAM total (standard) scaled to 480i, 480p, 720p, or 1080i DOCSIS® 2.0 cable modem with support for DSG Single 54 to 864 MHz video tuner RF out-of-band (OOB) data transmitter/receiver Digital video (64 QAM/256 QAM) On-screen diagnostics Video scaling (Picture-in-Graphics) Macrovision™, HDCP, 5C DTCP, and CGMS-A content Accelerated graphics protection schemes on the respective interfaces Motion-compensating temporal filter video noise Full-featured front panel display and controls reduction Motion-adaptive de-interlacing Integrated 3-D comb filter for state-of-the-art color and resolution www.amt.com SPECIFICATION SHEET DCH6200 Set-top Box STANDARD -
Procom-Marine Antennas
MARINE ANTENNAS Amphenol Private Networks PROCOM - Making the world smaller www.procom.dk Marine Antennas Table Of Content Home 1 S.M2 4 S.8Y series 7 S.6Y series 10 S.4Y series 13 S.3Y series 16 S.2Y series 20 S.1H series 23 S.1 series 26 RX 5000 29 TWA 1 31 SF 160/... 33 NTA 3E-SHT 36 Marifix 1 / Marifix 2 / ADT / MBS 38 MARCELL 3+ 42 MARCELL 47 MA DAB SC 51 MA 70/GPS 4/... 54 MA 2-1 SC-SHT 59 MA 2-1 SC 62 MA 2-1 MR 65 GPS 2000 68 GPS 100 KT-FME 73 GP 80 B/... 76 GP 80/160 78 GP 80 80 GP 450-3/... 82 HF 7500-3 84 GP 450/... 86 HF 5000 88 GP 40 90 GP 160 B 92 GP 160 5/8 94 GP 160 96 CXL 2400-6LW/... 99 CXL 2400-3/... 102 CXL 2/70C 105 CXL 2-5HD/... 108 CXL 2-3LW/... 111 CXL 2-3C/... 114 CXL 2-3 117 CXL 1800-6/DECT 120 CXL 2-2C 123 CXL 2-1LW/... 126 CXL 2-1/... 129 CXL 108-185C 132 BCL 1-KA 135 Page 2/254 Marine Antennas AAC 1/... 139 CXL VHF/GSM 142 CXL 800-1/... 145 CXL 900-3/... 147 CXL 900/1800/1900/UMTS 150 CXL 450-3LW-SS 153 CXL 450-6HD/T-X/... 156 CXL 70-3C/... 159 G-CXL 2-2C 162 G-CXL 2-1LW/... 165 CXL 5700-6 168 CXL 5700-3 171 CXL 5200-6LW 174 CXL 5700-1/.. -
Transducer Catalog
Transducer Catalog Version 3.1 www.ndtsystems.com Company Introduction For more than 48 years, NDT Systems Inc. has been a leader in designing, manufacturing, and selling high quality, advanced ultrasonic testing and bond testing equipment to the non-destructive testing marketplace. Our wide variety of non-destructive testing equipment includes: • Thickness Gauges • Bond Testers and Probes • Portable Ultrasonic Flaw Detectors • Precision Ultrasonic Transducers • Manual and Automated Scanners NDT Systems manufactures customized solutions, including fully automated inspection systems and specialized transducers. These transducers are available in all frequency domains and upon request. Based in Huntington Beach, California, NDT Systems offers a wide portfolio of products to support the inspection of almost all materials types from metals, ceramics, and plastics to advanced composite materials and laminated structures. NDT Systems products are used in nearly all industries such as Aerospace and Composite Inspection/ Manufacturing, Oil and Gas (pipeline inspection), Power Generation, Military and Transportation, and Metal Forming. Our high-quality equipment offers full functionality at a very competitive price. All products are 100% made in the USA 2 www.ndtsystems.com Ultrasonic Transducers NDT Systems takes pride in its vast transducer offerings. We manufacture and inventory a wide range of transducers, in addition to accessories that support the range. All transducers are certified prior to shipment. A recharacterization service is also available, based upon applicable standards. Our complete range of transducers and accessories includes: • Contact / Delay Line • Dual Element • Angle Beam • Immersion • Bond Testing • Gauge Specific • Scanner Specific • Cables • Test Blocks Custom Design Transducers NDT Systems has the ability to engineer custom design transducers, upon request, to meet your specific needs. -
Dch3416dch3416 All-Digital, Hdtv, Dual-Tuner Dvr M-Card™ Host Set-Top
MODEL DCH3416DCH3416 ALL-DIGITAL, HDTV, DUAL-TUNER DVR M-CARD™ HOST SET-TOP V R, M r D op e n - t - u t t Se s d ™ Ho C r a T DCH3416l ua , D - T l A , HD l l - ta V i g i D The Motorola DCH3416 all-digital HD DVR Host set-top provides a full set of SDTV, HDTV, and data features and interfaces. The DCH3416 supports a wide range of current and future interactive applications running on Motorola’s existing DCT legacy APIs. Features M-Card (Multi-stream CableCARD) Host support for Accelerated graphics conditional access Motion-adaptive de-interlacing Digital Video Recording (DVR) with support for dual recording and watch-and-record functionality Dolby™ Digital 5.1 and PCM audio 160 GB hard drive with shock mounting and fan 16 MB Flash (standard) Compatible with Motorola DCT legacy APIs 128 MB DRAM total (standard) Standard-definition (SD), enhanced-definition (ED), and DOCSIS® 2.0 cable modem with support for DSG high-definition (HD) MPEG-2 video support with output scaled to 480i, 480p, 720p, or 1080i RF out-of-band (OOB) data transmitter/receiver Dual 54 to 864 MHz video tuners On-screen diagnostics Digital video (64 QAM/256 QAM) Macrovision™, HDCP, 5C DTCP, and CGMS-A content protection schemes on the respective interfaces Video scaling (Picture-in-Graphics) Full-featured front panel display and controls www.amt.com SPECIFICATION SHEET DCH3416 Set-top Box STANDARD INTERFACES Front Panel On/Standby and Message indicators, output video format indicator, 4-character 7-segment display, 2 recording indicators, IR remote control sensor, USB -
Trompeter Electronics T21 Military Aerospace
1 Contents RF Interconnect Products Terminations & RFI Caps Introduction ...................................................................................... 2 Coax Terminations & RFI Caps .................................................. 45 Chain Options .............................................................................. 45 Trompeter Quality ISO 9001 Registration ..................................................................... 3 Stainless Steel Rope for "D" Ring Option .................................. 45 Warranty Information ...................................................................... 3 Twinax/Triax Terminations & RFI Caps .................................... 46 Space Qualified Connectors Adapters (Custom and Standard) Outgassing Specifications ................................................................ 4 Adapter Circuitry Schematics ...................................................... 47 Twinax/Triax Connector Series Coax to Coax Adapter Table ....................................................... 48 Mil-Std-1553B Data Bus General Specifications Guide ............. 5-6 Coax/Twinax/Triax Adapter Table......................................... 49-50 70/370 Series Patching Products MIL-C-49142 QPL'd Connectors .................................................... 8 TRB/TRT Miniature Plugs & Jacks ................................................ 9 TRB/TRT Miniature Bulkhead Jacks ............................................ 10 Panels Miniature Circuit Board Jacks ...................................................... -
Copper Product Catalog BECAUSE PERFORMANCE MATTERS
Copper Product Catalog BECAUSE PERFORMANCE MATTERS ARIA TECHNOLOGIES, INC. 5 13 Category 6 & 6A Products Category 5E Products 23 29 Category 3 Products Patch Panels, Outlets & Jacks 37 Wire Management ARIA Technologies - 102 Wright Brothers Avenue, Livermore, CA 94551 Telephone: (925) 447-7500 E-mail: [email protected] ARIA TECHNOLOGIES, INC. 41 45 Modular Adapters & Products Peripheral Cables & Products 63 83 Performance Plus A/V Products Bulk Cable 88 Connectors & Hoods ARIA Technologies - 102 Wright Brothers Avenue, Livermore, CA 94551 Telephone: (925) 447-7500 E-mail: [email protected] ARIA TECHNOLOGIES, INC. Table of Contents A Category 6, 6A Products 5 H PERFORMANCE PLUS™ Audio/Video 63 Patch Cables........................................................ 6 HDMI™ & DVI Cables...................................... 64 Keystone & 110 Patch Cables.............................. 9 RCA Audio/Video Cables................................. 66 Patch Panels & Keystone Jacks............................... 10 S-Video Cables & Adapters............................... 71 Bulk Cable........................................................... 12 F & BNC Cables................................................ 72 B Category 5E Products 13 Custom Coaxial Cable Ordering Chart............... 73 Y Adapters...................................................... Patch Cables...................................................... 14 74 1/4” & 3.5mm Phone Cables.......................... Patch Panels & Harmonicas................................. 18 75 XLR & TOSLINK™ -
Uhf Catalogreduced.Pdf
Ant Freq Ant Enviro Freq PIM Elec Tune Misc. Spec Sinclair Config Pattern Conn ( Mount Gain Sturct Finish ) Proto Typ Range Series - Rating Split Rating Elev Freq - - Options - Assembly Environmental Rating PIM Rating Electrical Elevation X=Prototype S=Sinclair S=Standard duty L=Enhanced PIM rating Dnn=Electrical downtilt in Miscellaneuos Options H=Heavy duty S=Standard PIM rating degrees where nn = (00 - 10) BC= Bird cap Antenna Type U=Ultra duty Unn=Electrical uptilt in Cx= Where x = (0 - 99) designating cable length C=Collinear omni degrees where nn = (00 - 10) (in feet) if other than standard. This code must not D= Exposed dipole Configuration been used for ordering jumper cables. E=Enclosed dipole 2=Dual bay. Single input cable Connector Gain CG= Coast guard G=Ground plane 4=Four bay. Single input cable BF=BNC female G3 = 3 dB HP= High-power version (special assembly: should I=In-building D=Dual array. Two separate input cables BM=BNC female G5 = 5 dB be assigned an E-number instead?) M=Mobile L=Low profile DF=7/16 DIN female G6 = 6 dB IC= Integrated ice-guard version (special assembly: P=Single polarity panel M=Marine version (gen. 156-162.5 MHz) DM=7/16 DIN male G8 = 8 dB should be assigned an E-number instead?) R=Radome-encl, yagi/l.p./etc. Q=Quad array. Four separate input cables NF=N female LM= Less mast T=Transport, low profile (excal) R=Radome NM=N male LS= Integrated lightening spike version V=Corner or circular reflector T=Triple array. -
Kbox A-103 Users Guide
USER GUIDE KBox A-103 Doc. User Guide, Rev. 3.1 Doc. ID: 1057-0976 www.kontron.com KBox A-103 – User Guide, Rev. 3.1 This page has been intentionally left blank www.kontron.com // 2 KBox A-103 – User Guide, Rev. 3.1 KBOX A-103 - USER GUIDE Disclaimer Kontron would like to point out that the information contained in this user guide may be subject to alteration, particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee on the part of Kontron with respect to technical processes described in the user guide or any product characteristics set out in the user guide. Kontron assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright or mask work rights to these products and makes no representations or warranties that these products are free from patent, copyright or mask work right infringement unless otherwise specified. Applications that are described in this user guide are for illustration purposes only. Kontron makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Kontron expressly informs the user that this user guide only contains a general description of processes and instructions which may not be applicable in every individual case. In cases of doubt, please contact Kontron. This user guide is protected by copyright. All rights are reserved by Kontron. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the express written permission of Kontron. -
Owner's Manual
Owner’s Manual MEDIAMASTER 9400S MEDIAMASTER 9400S Contents FOR YOUR SAFETY 4 The Radio button 15 Rear panel 4 Volume level 15 Front panel 5 List of TV channels 15 INSTALLATION OF THE MEDIAMASTER 5 List of Radio channels 16 Connecting the Mediamaster to the Video recorder 16 satellite dish 6 Subtitling and Teletext. The TEXT Button 16 Connecting the Mediamaster to a TV set 6 SETTING FROM THE MAIN MENU 16 Connecting to a TV and a video recorder 7 TV channels and radio channels 17 If your VCR does not have a SCART- TV Guide and Radio Guide 17 Connector 7 Edit Channels 17 Connecting to an analogue satellite- Rearrange List 18 receiver and a video recorder 7 Rename List 18 Connecting to Hi Fi system 8 Add channels 18 Preparing the remote control 8 Lock channels 18 Before you continue 8 Rearrange channels 19 REMOTE CONTROL 9 Remove channels 19 BASIC SETTINGS 10 USER PREFERENCES 19 Tuning procedure when RF Parental control 19 Connections are used 10 Language settings 20 The Welcome Menu 11 System settings 20 Language settings 11 On/Off Timer setting 21 Antenna Satellite configuration 11 GAME 21 Automatic channel Search 12 INSTALLATION SUBMENUS 22 Manual channel Search 13 Antenna Satellite configuration 22 VIEWING TV 13 Automatic channel search 22 General information 13 Manual channel search 22 TV screen format 14 Advanced channel search 22 Start/stop watching TV 14 Reinstall 23 Select channel 14 System Information 23 Program Information, the “ i ” button 14 GLOSSARY OF TERMS 24 TV Guide 15 PROBLEM SOLVING 25 TECHNICAL SPECIFICATION 26 MENUS SCREEN STRUCTURE 27 Nokia Multimedia Terminals operates a policy of continuous development. -
Coaxial Cable
ANALOG ELECTRICAL and DIGITAL VIDEO FORMATS and CONNECTORS Analog Electrical Formats/Connectors Component Video Component video is a type of video information that is transmitted or stored as two or more separate signals (as opposed to composite video, such as NTSC or PAL, which is a single signal). Most component video systems are variations of the red, green and blue signals that make up a television image. The simplest type, RGB, consists of the three discrete red, green and blue signals sent down three wires. This type is commonly used in Europe through SCART connectors. Outside Europe, it is generally used for computer monitors, but rarely for TV-type applications. Another type consists of R-Y, B-Y and Y, delivered the same way. This is the signal type that is usually meant when people talk of component video today. Y is the luminance channel, B-Y (also called U or Cb) is the blue component minus the luminance information, and R-Y (also called V or Cr) is the red component minus the luminance information. Variants of this format include YUV, YCbCr, YPbPr and YIQ. In component systems, the synchronization pulses can either be transmitted in one or usually two separate wires, or embedded in the blanking period of one or all of the components. In computing, the common standard is for two extra wires to carry the horizontal and vertical components, whereas in video applications it is more usual to embed the sync signal in the green or Y component. The former is known as sync-on-green. -
COAXIAL CONNECTOR CHART Other Names Connector Maximum (Or Mates Male Female Type Frequency With)
COAXIAL CONNECTOR CHART Other names Connector Maximum (or mates Male Female Type Frequency with) PL-259 (male), 300 MHz or SO-239 less (female) The UHF type connector saw its conception in the early 1930's, a time when VHF/UHF technology was quite new. The forefathers of VHF were in many cases Amateur radio experimenters, most with Engineering and technical backgrounds. They began experimenting and working the VHF frontier around 1926. Soon thereafter research into FM radio and Television began and out of this era came the then named UHF connector. Manufacturers of UHF plugs and receptors all state that this type connector are of generally non-constant UHF (characteristic) impedance and are suitable for use up to 200 or 300 MHz only, depending on production quality. They also state that the UHF connector can be used up to 500 MHz with a cautionary note of reduced performance. The so named UHF connector from the past is not really suitable for use above 300 MHz at all. Perhaps the exception to this would be when a cheap and rugged system is required where loss and good signal to noise ratio is of little concern. However, even for frequencies as low as 144 MHz, if low loss and good signal to noise ratio are very desirable, the use of UHF type connectors is not recommended. The UHF connector still has a place in many applications where a robust but economical RF connector is required, but for serious applications its use should be limited to below 100 MHz. The N type is far superior in performance, and it should also be noted the BNC type connector is similar in performance to the N type, but has the disadvantage of being less rugged.