DOCSLIB.ORG

Rexroth SYNAX 200 Motionlogic Version 13 Type of Documentation Application Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rexroth SYNAX 200 Motionlogic Version 13 Type of Documentation Application Manual Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service R911313736 Rexroth SYNAX 200 Edition 02 MotionLogic Version 13 Application Manual About this Documentation Rexroth SYNAX 200 - MotionLogic Title Rexroth SYNAX 200 MotionLogic Version 13 Type of Documentation Application Manual Document Typecode DOK-SYNAX*-IL*-13VRS**-AW02-EN-P Internal File Reference • SYNAX200-MotionLogic 13VRS (PPC-R).doc • Document number 120-2200-B367-02/EN Purpose of Documentation This documentation describes • the expansion of the system solution SYNAX 200 MotionControl by the integrated PLC LogicControl to the system solution SYNAX 200 MotionLogic. Record of Revisions Description Release Notes Date DOK-SYNAX*-IL*-13VRS**-AW01-EN-P 03.06 Version 13VRS DOK-SYNAX*-IL*-13VRS**-AW02-EN-P 02.07 First edition Copyright 2007 Bosch Rexroth AG Copying this document, giving it to others and the use or communication of the contents thereof without express authority, are forbidden. Offenders are liable for the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design (DIN 34-1). Validity The specified data is for product description purposes only and may not be deemed to be guaranteed unless expressly confirmed in the contract. All rights are reserved with respect to the content of this documentation and the availability of the product. Published by Bosch Rexroth AG Bgm.-Dr.-Nebel-Str. 2 • D-97816 Lohr a. Main Telephone +49 (0)93 52/40-0 • Tx 68 94 21 • Fax +49 (0)93 52/40-48 85 http://www.boschrexroth.com/ Dept. BRC/ESY3 (JR/KG/TD) Note This document has been printed on chlorine-free bleached paper. DOK-SYNAX*-IL*-13VRS**-AW02-EN-P Rexroth SYNAX 200 - MotionLogic Contents I Contents 1 Introduction 1-1 1.1 Overview SYNAX 200 MotionLogic .............................................................................................. 1-1 Programming environment IndraLogic .................................................................................... 1-1 Supported programming languages ........................................................................................ 1-1 Communication with the programming interface..................................................................... 1-2 Target and libraries.................................................................................................................. 1-2 I/O configuration ...................................................................................................................... 1-3 Multitasking.............................................................................................................................. 1-5 Diagnosis ................................................................................................................................. 1-5 Storage of the PLC program.................................................................................................... 1-5 Technical data ......................................................................................................................... 1-6 2 Communication 2-1 2.1 IndraLogic via SCP/SIS ................................................................................................................ 2-1 Overview.................................................................................................................................. 2-1 Communication setting MotionLogic ....................................................................................... 2-2 Communication setting SCP.................................................................................................... 2-4 Communication setting IndraLogic .......................................................................................... 2-6 2.2 Serial IndraLogic protocol............................................................................................................. 2-8 Communication setting MotionLogic ....................................................................................... 2-9 Communication setting IndraLogic ........................................................................................ 2-10 2.3 IndraLogic protocol Ethernet....................................................................................................... 2-12 Communication setting MotionLogic ..................................................................................... 2-13 Communication setting IndraLogic ........................................................................................ 2-13 3 Extension of programming environment IndraLogic 3-1 3.1 Overview about the system specific extensions of the programming environment IndraLogic ..................................................................................................................................... 3-1 3.2 Tool "Install / Deinstall GSD-File" ................................................................................................. 3-2 Installation of a Profibus-DP slave........................................................................................... 3-2 Deinstallation of a Profibus-DP slave ...................................................................................... 3-4 3.3 Tool "IndraLogic Archive Extractor".............................................................................................. 3-5 Open IndraLogic project from the archive file.......................................................................... 3-5 3.4 Tool "SYNAX 200 Information"..................................................................................................... 3-8 3.5 Tool "SYNAX 200 Target Converter"............................................................................................ 3-8 General procedure of a versions change ................................................................................ 3-9 Export of a PLC project ........................................................................................................... 3-9 Conversion of an export file................................................................................................... 3-10 Import of a PLC project.......................................................................................................... 3-13 DOK-SYNAX*-IL*-13VRS**-AW02-EN-P II Contents Rexroth SYNAX 200 - MotionLogic 4 PLC configuration 4-1 4.1 Introduction ................................................................................................................................... 4-1 4.2 IndraLogic targets ......................................................................................................................... 4-5 Target "SYNAX 200 - MotionLogic 13VRS (PPC-P)".............................................................. 4-5 Target "SYNAX 200 - MotionLogic 13VRS (PPC-R)".............................................................. 4-6 4.3 Import of the PLC configuration.................................................................................................... 4-7 4.4 Data exchange between MotionControl and LogicControl on the SYNAX 200 - MotionLogic (MotionLogic Data Exchange)................................................................................ 4-10 Binary control and status signals (Cyclic Motion Data) ......................................................... 4-11 Process data - parameter (Cyclic Motion Data) .................................................................... 4-17 Fieldbus data (Cyclic Fieldbus Data)..................................................................................... 4-28 4.5 PPC onboard I/O ........................................................................................................................ 4-34 4.6 Remote Connections .................................................................................................................. 4-35 4.7 Local RECO02 I/Os .................................................................................................................... 4-36 4.8 Fieldbus master interface ........................................................................................................... 4-39 Profibus-DP master DPM01-PC104...................................................................................... 4-40 DeviceNet-Master DNM01-PC104 ........................................................................................ 4-43 4.9 Fieldbus slave interface.............................................................................................................. 4-45 Profibus-DP slave DPS01-PC104 ......................................................................................... 4-46 5 Parameter of the LogicControl on the MotionLogic 5-1 5.1 General information ...................................................................................................................... 5-1 5.2 Configuration and motion control parameter ................................................................................ 5-1 Y-0-0011: Integrated PLC timeslot in MC cycle time .............................................................. 5-1 Y-0-0016: Integrated PLC configuration.................................................................................. 5-1 Y-0-0020 Integrated PLC - Control word................................................................................. 5-3 Y-0-0034 Target cycle time ....................................................................................................
Load more

Recommended publications
  • Annual Home Brew Night
    W6OTX W6ARA PAARA NEWSLETTER K6OTA K6YQT VOLUME 63, NUMBER 1, January 2013 PAARAgraphs The Official Newsletter of the Palo Alto Amateur Radio Association, Inc. President’s Corner Annual Home Seasons Greetings from Ja- pan. The board did not meet Brew Night this month but we are plan- ning the FARS / PAARA Win- Show Off Your hardware or ter Banquet on Jan 18, 2013 when Steve Kushman of the Sofware Project California Historical Radio So- ciety will speak. Among other on Jan 4, 2013 prizes the first prize will be an Elecraft KX3, a well- at respected, full-featured, all- mode HF Transceiver covering 160-6 m. Check Cubberley Community Center the FARS website for more details. Below is a picture of snow in Japan. (ed) 2 PAARAgraphs—January 2013 Celebrating 75 years as an active ham radio club—Since 1937 TWO CLANDESTINE RADIOS OF WWII Replicating the prison camp radio and the Paraset spy transceiver Hiroki “Hiro” Kato, AH6CY [email protected] Continued from (This article first appeared in the Nov, 2012, issue of Electric Radio.) Dec 2012 II. The Paraset spy transceiver in Europe In the European war theatre, the Nazi's successful invasion and occupation of many countries spawned the resistance movement and the Allied clandestine field operatives were sent into these countries via sea route or dropped from planes to obtain information on Nazi troop and ship move- ment as well as to report on weather, the important real time information needed as there was no weather satellite then. The Royal Signals Communications Unit developed several kinds of radios and they were constructed by the Secret Intelligence Service (MI6, i,e., Military Intelligence, Section 6) in the workshops at first at Barnes in London, then from 1940 at Whaddon Hall and from 1942 onwards at Little Horwood, both in the north Buckinghamshire.
    [Show full text]
  • March 8, 2018 Board Meeting March 8
    Volume XXV, Issue 4 April 2018 Editor: Thomas Price; KC2PSC March 8, 2018 Board Meeting The meeting was called to order at 147.210 repeater in the next several 7:05 PM. months. Present were Peter AA2VG, Rich There was an offer from Eric, W2TMA, Neil KC2TAF, Neil KE2EJ of LIMARC, to sell LARC a W2NDG repeater. A board vote to hold off on The recent progress on the 147.210 any purchase was passed. We are repeater was discussed. grateful for the offer but will hold We have a new repeater and off for now. controller donated by Bill Scheibel The board voted to thank Bill N2NFI. N2NFI for his vital help and his Bill has the first right of refusal if donation. We will also offer Bill a we decide to discard, sell or trade free membership to LARC. the equipment. We discussed a final cleanout of the There are still adjustments to be LARC trailer and obtaining a large made but the signal improvement is cabinet for storage, tents and radios, dramatic. to be placed in the repeater The board voted and passed a building. proposal to obtain an estimate of We also discussed meeting with our what it would cost to replace the town Supervisor, Chad Lupinacci, hardline and top antenna for the regarding cooperation between LARC and the town. March 8, 2018 General Meeting minutes The meeting was called to order at Peter AA2VG presented membership. We 7:30PM now have 61 paid and honored members. Progress on the repeater was discussed as Rich W2TMA discussed our VE session above.
    [Show full text]
  • KISHWAUKEE AMATEUR RADIO CLUB Club Call: WA9CJN /Repeater 146.730, -O/S, 100PL JULY 2017 NEWSLETTER Editor: Kent, KC9LIF
    KISHWAUKEE AMATEUR RADIO CLUB Club Call: WA9CJN /Repeater 146.730, -O/S, 100PL JULY 2017 NEWSLETTER Editor: Kent, KC9LIF Club Officers: Next Club Meeting: President – Tom, K9GPC July 12th, 2017 Vice President– Brian KD9BKS Location: Treasurer – Bob W9ICU Christ Community Church Secretary – Ed, KC9PMM 1200 South Malta Rd., DeKalb, IL st Club Dues due on Nov 1 *************************************** On the web: www.kish-club.org or KARC at P.O. Box 371, DeKalb, IL 60115 Monday evening 2 meter net: 8:30 PM on WA9CJN repeater, featuring ARRL audio news AREAS/RACES net: Thursday evenings 7PM on WA9CJN repeater ARC Monday Night 2M Net: New the Tuesday or Wednesday evenings held Start Time. At the Feb. Meeting it was previously. decided to start the net 1/2hr earlier each week. The Net now starts at So, please note the VE Testing days – 8:30pm local time. the third Saturday of every odd-numbered month, from 9:00 AM to 12 Noon. 80/40 METER RAG CHEW NET: Mike Important: a new Element 2 (Technician) WD9GNX reports that the net is question pool came into effect on July 1, 2014, currently on 3.780 +/-5 kHz at 8PM effective thru June 30, 2018, new Element on Thursdays and Fridays, with Mike 3 (General) question pool became effective and Paul KD0GIX and occasionally, John on July 1, 2015, effective thru June 30, K9VIS. Formerly on 160M, at 8:00pm 2019, and a new Element 4, and (Extra) every evening. Then we did have to Pool became effective on July 1, 2012, move to 7.213 +/- 5 kc, and then effective thru June 30, 2016.
    [Show full text]
  • WA4MNT Paraset Project Oluf Reed Olsen's Original Paraset at the Imperial War Museum in London
    WA4MNT Paraset Project Oluf Reed Olsen’s original Paraset at the Imperial War Museum in London The “Paraset” is a small (for 1940’s standards”), low power, vacuum tube, CW, clandesitne transceiver. It was parachuted behind enemy lines, to Allied resistance groups in northern Europe, and Scandinavia during WW II. It was designed for Britain’s Special Operations Executive. It was known as the Whaddon Mark VII, developed at the Royal Signals Communications Unit at Little Horwood and the workshops of Whaddon Hall. Buchinghamshire in the early stages of the war. The regenerative receiver covered 3.0 MHz – 7.6M MHz, in one band, while the crystal controlled transmitter coverage was slightly larger, in two bands, selectable by a toggle switch. The output power was approximately 4-5 watts. Original remaining Parasets show that they were housed in knapsacks, small boxes and metal cases. There were different power supplies that would operate from 6 volts DC, to 220 VAC. There was even a steam powered 6 VDC generator. Most of the original units were sent back to Britain after the war and destroyed. A few are in private hands and museums. There has been a lot of activity in the last few years to reproduce the radio. A very accurate reproduction can be fabricated due to the research of various groups. There is a Yahoo group dedicated to this topic, search for “parasetbuilders” , and a group in Britain www.paraset.co.uk. Lee Hutchins (KA1IRL) showing his Parasets to Doug Hendricks (KI6DS) In 2007 I attended the Pacificon QRP forum sponsored by the Norcal QRP group.
    [Show full text]
  • (Section VIII), the Workshops Were Still Making the Mkv - an Excellent but Very Heavy Transceiver
    3, Arundel House, Courtlands, Sheen Road, Richmond, Surrey TW10 5AS. Telephone: 020 8940 3223 email: [email protected] www.geoffreypidgeon.com SCU-NEWSLETTER No. 1-17 Wednesday, May 24, 2017 1. One arm longer than the other? When I joined MI6 (Section VIII), the workshops were still making the MkV - an excellent but very heavy transceiver. Indeed, it was so heavy that the joke going the rounds was that the Gestapo could easily spot our agents - as he would have one arm longer than the other! You might think we could not make jokes like that but we did and Ken Green - one of our draughtsmen produced this for ‘Stable Gossip’ the Whaddon Hall - House Magazine. One of our agents is up at the Pearly Gates - still clutching his MkV - all part of our somewhat grim wartime humour! Although it could be interpreted as successful wireless with the caption ‘Penetration’ - it was meant to be a ‘dig’ at the sheer weight of his set - leading to his being revealed as an agent and very soon despatched to the Pearly Gates. One of the reasons for the early ‘spat’ between MI6 and SOE - is that some time after SOE was formed in July 1940 - MI6 (Section VIII) at Whaddon Hall were instructed to supply them with their first wireless sets. Apparently, a party from the infant SOE came to our workshops, where Lt. Cdr. Percy Cooper RNVR - in charge under Lt. Col. Hornby - gave them twenty of our then precious MkVs. They soon afterwards complained that they were too heavy for an agent to carry about.
    [Show full text]
  • Paraset Replica
    The Whaddon Mk VII - Paraset Clandestine Radio ...from 2010 01 16 A transceiver developed during the WWII 1941 - 1945 in England for resistance groups in Europe Belgian ham named Mr. Joseph "Joe" Le Suisse, ON5LJ (SK), was one of the first who build a copy of a Paraset. He made a big job to make the first schematic and mechanical drawing from a real Paraset. This was about 1990. All of his drawing are handmade from a museum Paraset wich he measured and made the schematic from. Jo Scholtes - ON9CFJ made more drawings from ON5LJ.:s work. The Italian IK0MOZ followed in 2001 to make more Paraset's And now we building Paraset's around the world. History of Paraset by Bob Kellog QRP QUARTELY From David White Well many thanks for the photographs of the Paraset they have come out excellently. I must say that they are very realistic to the real thing. I have 3 of the original real ones. (1) is the wooden box version. (2) is the metal cash box version that came later (3) the third one i have canabalised to use the parts for same people who originally wanted to construct them many years ago and could not get hold of the real ones. I was one of 4 people sent to the old Poundon (SOE) radio station 36 years ago to close it down, and in one of the rooms there was dozens of Bl 82 and MK7 {paraset) radios. When we returned we were given sledgehammers and told to destroy them all.
    [Show full text]
  • 1. an Apology. in SCU-Newsletter 3-16, I Referred to the 'Special
    3, Arundel House, Courtlands, Sheen Road, Richmond, Surrey, TW10 5AS. Telephone: 020 8940 3223 email: [email protected] www.geoffreypidgeon.com SCU-NEWSLETTER No. 4-16 Friday, May 27, 2016 - my 90th birthday! 1. An apology. In SCU-Newsletter 3-16, I referred to the ‘Special Wireless Group’ the SWG - whereas I know darned well that was not their title! Geoffrey - read your own books! In ‘The Secret Wireless War’ on page 78 Chapter 12 - it makes it quite plain the title is ‘Special Operations Group’ the SOG. I know that is correct, as my late friend Maurice Richardson and Ted Cooper were amongst those in the Group. Also, I often met SOG members in the Naffi Canteen behind Whaddon’s only pub - ‘The Lowndes Arms.’ 2. And Now! It is high time that Bletchley Park finally recognised - that without MI6 (Section VIII) - the code breakers work was pointless. The latest indicator is the Blue Plaque I recently presented to Whaddon Village to acknowledge the work of the Special Operations Group’ (SOG) of MI6 (Section VIII). It was the SOG who sent the ULTRA traffic out to Allied military commanders in the Field - where it could be put to use. Otherwise, the code breakers work was a waste of time! This plaque is on the Whaddon’s Jubilee Hall. As you know, Whaddon was the home of Richard Gambier- Parry’s MI6 (Section VIII). He was the Controller of SIS Communications and was engaged as such in 1938 - by Admiral Sir Hugh Sinclair who was ‘C’ at that time.
    [Show full text]
  • Model LL200 PC-Based Custom Computation Building Tool User's Reference for UP750
    User’s Manual Model LL200 PC-based Custom Computation Building Tool User’s Reference for UP750 IM 05G01B22-03E IM 05G01B22-03E 6th Edition <Toc> <Ind> <Rev> <Introduction> i Introduction This user’s manual provides descriptions of the computation modules, registers and other devices that are necessary when customizing the built-in computations and/or display functions using the LL200 PC-based Custom Computation Building Tool (hereinafter simply referred to as the LL200). Refer to this manual to familiarize yourself with the functions available in this tool or when you are not sure about the function of a particular module. For details on the startup and operation of the LL200, see the Model LL200 PC-based Custom Computation Building Tool user’s manual (IM 05G01B22-01E). ■ Intended Readers This manual is intended for people familiar with the functions of the UP750 Digital Indicat- ing Controller and capable of working with Windows, such as instrumentation and control engineers and personnel in charge of maintaining instrumentation and control equipment. ■ Related Documents The following user’s manuals all relate to the LL200. Read them as necessary. The codes enclosed in parentheses are the document numbers. ● Model UP750 User’s Manual for Single-loop Control (IM 05E01B02-01E to -07E) Explains the basic operation of the UP750 controller. Supplied with the UP750. ● GREEN Series User’s Manual (Reference) (IM 05D01A02-01E) Explains the functions of the GREEN Series controllers in detail. Supplied with each GREEN Series model. ● GREEN Series Communication Functions (IM 05G01B02-01E) Explains the communication functions and communication protocols of the GREEN Series in detail.
    [Show full text]
  • MEPC.2/Circ.24 1 December 2018 PROVISIONAL CATEGORIZATION
    E 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: +44 (0)20 7735 7611 Fax: +44 (0)20 7587 3210 MEPC.2/Circ.24 1 December 2018 PROVISIONAL CATEGORIZATION OF LIQUID SUBSTANCES IN ACCORDANCE WITH MARPOL ANNEX II AND THE IBC CODE 1 Introduction This circular is issued in accordance with regulation 6.3 of MARPOL Annex II, replacing all previously issued circulars under this title. 2 Lists of annexes 2.1 The circular includes the following annexes: Annex 1: List 1: Pure or technically pure products and mixtures assessed as a whole Annex 2: List 2: Pollutant-only mixtures containing at least 99% by weight of components already assessed by IMO Annex 3: List 3: (Trade-named) mixtures containing at least 99% by weight of components already assessed by IMO, presenting safety hazards Annex 4: List 4: Pollutant-only mixtures containing one or more components, forming more than 1% by weight of the mixture, which have not yet been assessed by IMO Annex 5: List 5: Substances not shipped in pure form but as components in mixtures Annex 6: Synonyms for vegetable oils Annex 7: Country abbreviations Annex 8: Tripartite agreement contact addresses Annex 9: Manufacturers authorized to conduct pollutant-only assessments by calculation Annex 10: Cargo tank cleaning additives Annex 11: Biofuels recognized under the 2011 Guidelines for the carriage of blends of petroleum oil and biofuels Annex 12: Energy-rich fuels subject to Annex I of MARPOL I:\CIRC\MEPC\02\MEPC.2-CIRC.24.docx MEPC.2/Circ.24 Page 2 2.2 Annexes 1 to 5 set out lists of Noxious Liquid Substances (NLS) (or products, as they are referred to hereinafter), by category, with associated carriage requirements, as assessed and confirmed by the ESPH Working Group of the PPR Sub-Committee, or as established under tripartite agreements and communicated to the Organization, in accordance with regulation 6.3 of MARPOL Annex II.
    [Show full text]
  • The Potato Industry of the State of Maine
    The University of Maine DigitalCommons@UMaine Maine History Documents Special Collections 6-1907 The Potato Industry of the State of Maine William F. Schoppe Follow this and additional works at: https://digitalcommons.library.umaine.edu/mainehistory Part of the History Commons Repository Citation Schoppe, William F., "The Potato Industry of the State of Maine" (1907). Maine History Documents. 345. https://digitalcommons.library.umaine.edu/mainehistory/345 This Thesis is brought to you for free and open access by DigitalCommons@UMaine. It has been accepted for inclusion in Maine History Documents by an authorized administrator of DigitalCommons@UMaine. For more information, please contact [email protected]. THE POTATO INDUSTRY Of the STATE OF MAINE. A Thesis Presented to the FACULTY and TRUSTEES of the UNIVERSITY OF MAINE For the Attainment of the Degree of Bachelor of Science z in AGRICULTURE, By William F. Schoppe Orono, Maine June 1907 1 The potato ( Solanum Tuberosum) la one of the six tuber bearing plants out of a family Of 1600 species. The tomato, tobacco, egg-plant and belladonna are also included in this family* It is more generally known by the name of "Irish potato*, "White potato*, and sonetines as "English potato." It is a native of America, coming originally from the plateaus of Chilli, Peru, and Mexico, One specie of it being found as far north as South Colorado, The potato was introduced into Virginia and Worth Carolina during the last half of the sixteenth century. It is olaimed that colonists returning to England took the potato with them ia 1686, It had already been carried to Europe by the Spanish, and is described in Cerard'o Herbal, which was published in 1597, and the edition published in 1626 eon tains a wooden cut representing the potato as it appeared at this time, being a small gnarlly enlargment of the underground stem.
    [Show full text]
  • Front Page Index for the Vmars Signal Journal
    FRONT PAGE INDEX FOR THE VMARS SIGNAL JOURNAL . Search this index by selecting the “Control F” keys and typing in a keyword. (Capitals and spelling are important, so try various options.) The index is for information on where to find articles in the hard copy sent to VMARS members every three months and does not link directly to the articles. For information on how VMARS members can obtain hard copy back issues, see the end of this index. ---------------------------------------------------------------------------------------------------------------- ISSUE 1 October 2006 A Modern Rebuild of an HRO GEE – A Radio Navigation Aid Notes on the WS38 Little Dora and her Offspring Building a Replica Paraset A note on R210 Vibrators New For Old – A Restorer’s Dilemma The Explanation A Newcomer’s Arrival into Valve & Vintage The Admiralty Pattern AP1803A Transmitter ----------------------------------------------------------- ISSUE 2 January 2007 Garden Party Surprise – Another B2 Spyset “AM” – Ancient and Modern? AVO 8 Batteries Build a QRO Transmitter Part I: The RF Deck “Tricks of the Trade” Calculating Meter Shunts WS24 Reconstruction Project An Introduction to Clansman The T1509 Transmitter Silica Transmitting Valves How far can we push that crystal? On Him May Depend the Aircraft’s Safety Letters: HRO 15m bandspread coil pack ________________________________________ ISSUE 3 April 2007 An Irresistible Urge The Development of the ER-95* Military Transmitter Build a QRO Transmitter Part II: The Modulator and Power Supply Rejuvenating a Type 43
    [Show full text]
  • MEPC.2/Circ.26 1 December 2020 PROVISIONAL CATEGORIZATION of LIQUID SUBSTANCES in ACCORDANCE with MARPOL ANNEX II and the IBC CO
    E 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: +44 (0)20 7735 7611 Fax: +44 (0)20 7587 3210 MEPC.2/Circ.26 1 December 2020 PROVISIONAL CATEGORIZATION OF LIQUID SUBSTANCES IN ACCORDANCE WITH MARPOL ANNEX II AND THE IBC CODE 1 Introduction This circular is issued in accordance with regulation 6.3 of MARPOL Annex II, replacing all previously issued circulars under this title. 2 Lists of annexes 2.1 The circular includes the following annexes: Annex 1: List 1: Pure or technically pure products and mixtures assessed as a whole Annex 2: List 2: Pollutant only mixtures containing at least 99% by weight of components already assessed by IMO Annex 3: List 3: (Trade-named) mixtures containing at least 99% by weight of components already assessed by IMO, presenting safety hazards Annex 4: List 4: Pollutant only mixtures containing one or more components, forming more than 1% by weight of the mixture, which have not yet been assessed by IMO Annex 5: List 5: Substances not shipped in pure form but as components in mixtures Annex 6: Synonyms for vegetable oils Annex 7: List of country abbreviations Annex 8: Tripartite agreement contact addresses Annex 9: Manufacturers authorized to conduct pollutant only assessments by calculation Annex 10: Cargo tank cleaning additives I:\CIRC\MEPC\02\MEPC.2-Circ.26.docx MEPC.2/Circ.26 Page 2 Annex 11: Biofuels recognized under the 2019 Guidelines for the carriage of blends of biofuels and MARPOL Annex I cargoes Annex 12: Energy-rich fuels subject to Annex I of MARPOL 2.2 Annexes 1 to 5 set out lists of Noxious Liquid Substances (NLS) (or products, as they are referred to hereinafter), by category, with associated carriage requirements, as assessed and confirmed by the ESPH Working Group of the PPR Sub-Committee, or as established under tripartite agreements and communicated to the Organization, in accordance with regulation 6.3 of MARPOL Annex II.
    [Show full text]