Pankaj U. Zine
Total Page:16
File Type:pdf, Size:1020Kb
PANKAJ UTTAMRAO ZINE Mobile: +91 8447429650 E-mail: [email protected] Academic Credentials Class/ Specialization Institute University Year % Remark Degree Ph.D. Industrial IIT Delhi IIT Delhi 2011-12 -- Pursuing Engineering M.E. Manufacturing COEP, Pune Pune University 2003 63.78 Automation B.E. Production MIT, Aurangabad Dr. B.A.M.U., 2001 67.67 Aurangabad HSSC Science S. B. Sci. College, Aurangabad 1996 72.67 Aurangabad Divisional Board SSC -- ZPHS, Bhokardan Aurangabad 1994 83.85 Divisional Board Career Highlights Joined as a Research Associate in Mechanical Engineering Department, IIT Delhi since July 2011. Supervisor: Dr. M. S. Kulkarni Key Research Areas: • Reliability Engineering • Product Service System Design • Maintenance Management Working on a research project at IIT Delhi (Dept. of Mech. Engg.) funded by Council for Scientific and Industrial Research (CSIR), Govt. of India. Recognized by Dr. Babasaheb Ambedkar Marathwada University, Aurangabad (MH State) as a Post Graduate (PG) Teacher in Production / Manufacturing engineering, under the faculty of Engineering & Technology. Worked as Associate Professor in Mechanical Engineering at Marathwada Institute of Technology, Aurangabad (MH State) till July, 2011. Worked as Lecturer in Mechanical Engineering at Govt. College of Engineering, Aurangabad (MH State) during January 2005 to August 2007. Overall Teaching Experience Taught the following subjects at UG level • Machine Tool Design • Metrology and Mechanical measurements • Flexible Manufacturing Systems • Costing and Financial management • Engineering graphics • Mechatronics –I • Industrial Management • Production management • Elements of Mechanical Engineering Taught the following subjects at PG level • Advanced Machine Tool Design • Reliability Engineering • Advanced Manufacturing Techniques • Collaborative Engineering Research Project Presently working on a research project titled as ‘Development of an integrated approach for reliability based optimal system design for minimizing life cycle cost with special focus on Indian machine tool industry’ funded by Council for Scientific and Industrial Research (CSIR), Govt. of India. PG Dissertation title: ‘Analysis and optimization of cycle time for diesel engine driven welding set.’ Work done at Advani Oerlikon Limited, Pimpri, Pune. Projects Guided PG Project: On some investigations into Machining of Inconel 718 using Design of Experiments and Adaptive Neuro-Fuzzy Inference System. UG Level: Reliability improvement of Press Tools. Guided various projects at UG level in the area of manufacturing engineering. Overall Administrative Experience Worked as Joint Director, Central Assessment System (CAS) Engineering Examination, appointed by Controller of Examinations, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, for Semester –I, 2008. Worked as Faculty Adviser for Students Council, Marathwada Institute of Technology, Aurangabad for the academic year 2010-11. Worked as a Convener for organizing ‘Mech Fest – 07’, A National Level Technical Symposium held on 4th & 5th April 2007 at Government College of Engineering, Aurangabad. Worked as a Coordinator, for a five day training program on ‘Elements of Structural, Thermal and Coupled Field Analysis in ANSYS’, conducted at Mechanical Engineering Department, Marathwada Institute of Technology, Aurangabad, during 1st – 5th February, 2009. Worked as a Joint Organizing Secretary for ISTE Students Convention & National Seminar (MH & GOA Section) organized at Marathwada Institute of Technology, Aurangabad in 2008. Worked as Lab Incharge for Metrology and Mechanical Measurement Laboratory. Worked as Lab Incharge for CAD-CAM Laboratory. STTP/Industrial Training/Seminar/Workshop Attended Undergone Eight weeks Summer Faculty Research Programme (SFRF) at Department of Mechanical Engineering, Indian Institute of Technology (IIT), Delhi under the supervision of Dr. M.S. Kulkarni during 13th May to 9th July, 2010. Attended a Two-week STTP on ‘Mechatronics’ at VNIT Nagpur, during 2nd – 14th January 2005. Attended a One week STTP on ‘Modeling and Simulation of Mechanical Systems in Multi Energy Domains: a Bond Graph Approach’ at Government College of Engineering Aurangabad, during 9th – 15th January 2006. Attended a Two day workshop on ‘Research Methodologies and Report Writing (RMRW)’ organized at Government College of Engineering Aurangabad, during 15th – 17th January 2006. Attended an Industrial Training on ‘Six Sigma & TPM’ at Merico Industries Ltd. Jalgaon during 23rd – 25th February 2006. Attended a Three day workshop on ‘Product Lifecycle Management’ at SGGS Institute of Engineering & Technology, Nanded during 10th – 12th March 2006. Attended One-day seminar on ‘CAD / CAM / CAE Applications’ at Indo German Tool Room (IGTR) Aurangabad, on 24th February, 2009. Attended XIIth ISTE Staff Convention & National Seminar (MH & GOA Section) organized at JSPM Group of Institutes, Wagholi, Pune during 12th – 13th January 2008. Attended Two Weeks Training course in ‘Reliability Engineering’, at Government College of Engineering, Pune. Attended Two Weeks Training course in ‘I-DEAS’, at Government College of Engineering, Pune. Attended Six Weeks Training course in ‘Pro – Engineer (Wild Fire 2)’, at Government College of Engineering, Aurangabad. Computer/Software Proficiency AutoCAD (R14) I-DEAS Pro Engineer (Wild Fire 2) All Basic Operating Systems Membership of Professional Bodies ISTE Life Member (LM41083) IIIE Life Member (M9693) IIPE Annual Member (Reg.No.W/M/1329) List of Research Publications Papers in Conference Proceedings Presented a paper on ‘Hybrid Serial/Parallel Engineering’ in a national level conference Advances in Manufacturing Technology in the Era of Globalization (AMTEG) 2005, at Government College of Engineering Pune, held during 21st – 22nd January 2005. Presented a paper on ‘Mechatronics: An Application in Automotives’ in a national level conference TsyGeca 2006, at Government College of Engineering Aurangabad held during 23rd – 24th January 2006. A paper on ‘Role of PLC in Mechatronics’, presented in a national level conference ETME – 06 held at PET College of Engineering Vallioor, Tamilnadu, during 6th – 7th April 2006. A paper on ‘Experimental Study and Analysis of Performance of Mineral And Synthetic Lubricants on Wear Characteristics of Bearing Steel AISI 52100’ presented in a national level conference TAME – 06, held at YCMA, Faridabad, Haryana, during 9th – 10th December, 2006. Presented a paper on ‘Six Sigma: a Tool for Quality Improvement’ in a national level conference Enriching the Work Life – A Quality Engineering Perspective, held at Dr. D.Y. Patil College of Engineering Akurdi, Pune, held during 4th – 6th October, 2007. Presented a paper on ‘On Some Aspects of Agile Manufacturing: A Review’ in a national level conference Advances & Futuristic Trends in Mechanical Engineering (AFTME) 08, held at Atmiya Institute of Technology & Science, Rajkot, Gujrat on 09th December, 2008. Personal Details Date of Birth: 17th December 1978 Corresponding Address: C/O Dr. M. S. Kulkarni, (+91 11 2659 1137) 58, New Vaishali Apartment, IIT Delhi, Hauz Khas, New Delhi-16 Permanent Address: Flat A-4, Sanskar Shil Apartment, 52, Devanagari, Darga Road, Aurangabad – 431005 (MH State) E-mail: [email protected] Mobile: +91 8447429650. .