DOCSLIB.ORG

Design Consequences of High Humidity Basement

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Design Consequences of High Humidity Basement 4033600 Studies have shown that as much as 50% of the air in your home comes up from your basement or crawl space. This air is often higher in moisture content and carries with it various allergens and musty odors. When conditions linger above 60% relative humidity for extended periods of time, mold, mildew, and bacteria growth is stimulated. The American Lung Association, American Medical Association, and the EPA recommend maintaining relative humidity levels in the 30% - 50% range. Ventilation and air conditioning alone cannot provide the protection offered by a high capacity dehumidifier like the Santa Fe Compact.™ Protecting your family and your biggest investment is worth the best. "Application-Specific" Design Consequences of High Humidity The Santa Fe Compact was specifically designed for crawl • The ground in a crawl space or under the basement slab spaces. At 12" tall and 12" wide, the Santa Fe Compact can remains at a near constant temperature of 50-60ºF year round. fit where no other dehumidifier can. Innovative features These cool surface temperatures create micro-environments such as integrated vertical or horizontal exhaust outlets offer where the relative humidity of the air approaches its saturation flexibility even in exceptionally tight spaces, while the optional point (100%RH) and condensation (or sweating) can occur. The condensate pump, hang kit, and duct kits facilitate installation in conditions that result support mold/microbial growth and cause the most challenging applications. No conventional dehumidifier musty odors. can perform as efficiently and effectively in crawl spaces as the • Crawl spaces and basements are a major source of air infiltration Santa Fe Compact. that permeates up into the living area, transmitting odors, n High Efficiency – Exceeds ENERGY STAR® efficiency requirements. carrying moisture, and creating an environment conducive to n Large Capacity – The high capacity Santa Fe Compact molds, pests, and dust mite infestation. provides 70 pints per day of water removal at standard rating • Wet crawl spaces and basements contribute to the cupping conditions*. Medium-sized crawl spaces (up to 1800 sq. ft.) are of wood floors and the deterioration of floor joists, beams, no problem for the Santa Fe Compact. sub-flooring, insulation, and electrical-mechanical systems. n Low Temperature Operation – Engineered for crawl spaces, • Excess moisture encourages mold growth on wood and on any and the temperature and air flow issues that they present. other organic material in a crawl space. When many conventional dehumidifiers have stopped removing water from the air, the Santa Fe Compact keeps on Basement/Crawl Space Dehumidification protecting you and your home. The cooler temperatures in crawl spaces and basements create n Superior Air Filtration – MERV-8 filtration is standard on the unique humidity control challenges for homeowners. Santa Fe Compact. This superior level of air filtration also Capacities for residential dehumidifiers are measured in pints of keeps the Santa Fe Compact working at peak efficiency for water removed per day at standard conditions (80°F and 60% longer than other devices with cheaper designs. RH) determined by the American Home Appliance Manufacturers n Auto Restart – Santa Fe dehumidifiers will automatically (AHAM). At these conditions, the capacity of the Santa Fe restart at the original setting after a power outage. Compact is 70 pints per day, while most standard residential units range from 20 to 65 pints of water removal per day. n Optional Equipment – The engineers at Therma-Stor However, most basements and crawl spaces are cooler than designed remote ducting kits, hang kits, caster kits and 80°F and therefore the water removal capacity of the standard condensate pumps for use with the Santa Fe Compact. residential unit will be diminished significantly. These optional kits provide the ultimate in flexibility for your specific installation requirements. The Santa Fe Compact is necessary to ensure that enough moisture is removed at the real-world temperature of your *American Home Appliance Manufacturers (AHAM) standard testing conditions are crawl space or basement to prevent mold, mildew and bacterial 80°F and 60% RH. growth. The Santa Fe Compact is a dehumidifier designed for these cooler applications. Questions? Contact your dealer or call 1-800-533-7533 | www.santa-fe-products.com Performance and Technical Specs Part Number: 4033600 " This is the first time in ten years that our Blower: 150 CFM @ 0.0" WG basement is usable and comfortable. Being a woodworker, I don't have to worry about Power: 580 watts @ 80°F and 60% RH rust on my tools and equipment anymore. Supply Voltage: 115 volt – 1phase – 60 Hz I recommend your product to anyone with Current Draw: 5.1 amps a dampness problem." Operating Temp.: 49°F Min., 95°F Max. — Tim Sized for: 1,800 Sq. Ft. - Typical Miniumum Performance at 80°F and 60% RH Optional Accessories Water Removal: 70 Pints/Day 4027168 Pre-Filter Efficiency: 5.0 Pints/kWh 4028524 Pre-Filter 12-Pack Energy Factor: 2.4 L/kWh 4029748 MERV 8 Filter (9"x11"x1") Air Filter: MERV-8, Standard Pleat 4030421 MERV 8 Filters 4-Pack + 1 Pre-Filter Size: 9" x 11" x 1" 4030422 MERV 8 Filters 12-Pack Power Cord: 9', 115 VAC, Ground 4030671 MERV 11 Filter (9"x11"x1") 4027418 MERV 11 Filters 4-Pack + 1 Pre-Filter Drain Connection: 3/4" Threaded Female NPT 4030733 MERV 11 Filters 12-Pack Drain Hose: 8' Direct Gravity Drain Hose (5/8" ID x 7/8" OD) 4030113 Pump Kit Refrigerant Type: R410A (Refer to manufacturers label for more 4028616 Caster Kit information) 4029908 Hang Kit Refrigerant Amount: 15 oz. 4030426 Duct Kit, Supply and Return Dimensions: Unit Shipping 4030203 Duct Kit, Supply Only Width: 12" 18" 4030204 Duct Kit, Return Only Height: 12" 18" 4027415 8" Flex Duct 25' Length: 21" 27" 4020177 8" Flex Insulated Duct 25' Weight: 55 lbs 64 lbs 4020175 Remote Dehumidistat Remote Hygrometer Crawl space ALERT™ " If you are thinking of buying this unit Displays indoor Works remotely but not sure, I placed the compact and outdoor with your Santa Fe in our crawl space and it did the job. temperature, Dehumidifier to provide I tried other dehumidifiers from big relative humidity, a warning light when box stores and they helped but did moon phases, humidity levels are too time and date. high in the crawl space not solve the problem. I recommend and will automatically Wireless this machine. Great unit." turn off the dehumidifier sensor with low if the overflow safety — George temperature switch is tripped on the adaptor included. condensate pump. 4029577 4030280 One of the best Limited Warranties in the industry today – 2 YEARS – All Parts and Labor WARRANTY 5 YEARS – Sealed Refrigeration System Rev 6/9/15 Questions? Contact your dealer or call 1-800-533-7533 | www.santa-fe-products.com.
Load more

Recommended publications
  • Positive Condensate Drainage from Heat Transfer Equipment Under Modulating Steam Conditions
    Understand how a good heating system design on paper can become a big problem once installed. Positive Condensate Drainage from Heat Transfer Equipment under Modulating Steam Conditions November 13, 2017 CNY Expo - Looked Good on Paper… Types of Heat Transfer Direct The heating medium is directly mixed (convection) with the substance being heated i.e. “Direct injection”. Indirect (Heat Exchange Equipment) Heat energy from the heating medium is passed to the substance being heated through a physical barrier (conduction). Steam Heat Transfer 101 1. Steam Supply 2. Heat Transfer 3. Condensate Removal Heat Exchanger Flow Heat Exchanger Sizing Q = U x A x ∆T, where U = K /(dx * Fouling Factors) Type & Thickness of Materials of Construction. Standard HX sizes: 16.3-, 25.8-, 35.2-, 44.6-, 54.0-, 63.4-, 72.9-, 82.3-, 91.7-SQFT Copper Example: 887,760 = 324 x 27.4 x 100 Copper Application requires 27.4 SQFT but the Stainless Steel closest suitable size is 35.2 SQFT. dX A Double Wall Therefore, the HX starts over-sized by 28.5%. Normal Operation Product Temperature Input P1 Heat Exchanger P1 > P2 = Heat Exchanger Dry P2 Vacuum = Negative Differential Pressure Steam occupies 1,675 times the amount of space than water. 3 ft. When steam condenses in a “Closed-System”, a vacuum is created. 3 ft. 3 ft. Conventional Condensate Removal System Pressure: Modulating vs. Constant Pressure Time Pressure Time Modulating Steam Traps Valve Head & Seat Air Vent Float Mechanism Inverted Bucket Float & Thermostatic • Continuous Steam – Good • Continuous Steam –
    [Show full text]
  • Cd60 Dehumidifier Specifications
    To Buy: Visit www.sylvane.com or call (800) 934-9194 For Product Support: Contact Ebac USA at (757) 873 6800 CD60 DEHUMIDIFIER SPECIFICATIONS Specifications CD60 Features CD60 Model No. 10264FR-US Model No. 10264FR-US Height 17” (432mm) On/Off Control Width 20” (514mm) Electronic Defrost Control Depth 14” (356mm) Compressor Type Rotary Weight 80 lbs (36kg) Fitted Mains Plug Voltage 110 V Free Standing Adjustable Feet Phase 1 Remote Humidistat Frequency 60 Hz Adjustable Control Humidistat Current 7 A Hot Gas Defrost System Power 880W Hours Run Meter Airflow 360cfm (608m3/hr) High Capacity Condensate Pump Noise Level 57 dba Quick Disconnect Hose Coupling Refrigerant R407c 25’ Length of PVC Drain Hose Effective Volume 8,369 cu.ft (237m3) Epoxy Powder Coating Typical Extraction 56 ppd Minimum Operating Temperature 33°F (1°C) Maximum Operating Temperature 95°F (35°C) APPLICATION The EIPL CD60 commercial / industrial dehumidifier was designed to provide energy efficient humidity control in a wide range of applications including offices, laboratories, apartments, storage areas, restaurants, bars, museums, locker rooms, computer, telecommunication rooms and basements. It is a quiet, high efficiency, high capacity unit designed to suit your HVAC needs. KEY DESIGN FEATURES • Adjustable control humidistat to maintain the level of dryness • A convenient drain point for condensate collection of hose attachment • EIP’s unique “Hot Gas” defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures • Rugged, epoxy powder-coated steel chassis and housing. • Hours run meter • Simplicity of installation and operation with a standard 115V plug • Extra long power cord.
    [Show full text]
  • How to Perform Mold Inspections
    ~ 1 ~ HOW TO PERFORM MOLD INSPECTIONS Mold inspection is a specialized type of inspection that goes beyond the scope of a general home inspection. The purpose of this publication is to provide accurate and useful information for performing mold inspections of residential buildings. This book covers the science, properties and causes of mold, as well as the potential hazards it presents to structures and to occupants’ health. Inspectors will learn how to inspect and test for mold both before and after remediation. This text is designed to augment the student’s knowledge in preparation for InterNACHI’s online Mold Inspection Course and Exam (www.nachi.org). This manual also provides a practical reference guide for use on-site at inspections. Authors: Benjamin Gromicko, Director of InterNACHI Online Education, and Executive Producer, NACHI.TV Nick Gromicko, Founder, International Association of Certified Home Inspectors, and Founder, International Association of Certified Indoor Air Consultants Edited by: Kate Tarasenko / Crimea River To order online, visit: www.nachi.org www.IAC2.org www.InspectorOutlet.com Copyright © 2009-2010 International Association of Certified Indoor Air Consultants, Inc. (IAC2) www.IAC2.org All rights reserved. ~ 2 ~ Mold Inspection: Table of Contents Overview…....................................................................................... 3 Section 1: Types of Mold Inspections.............................................. 5 Section 2: IAC2 Mold Inspection Standards…………………………… 9 Section 3: What is Mold? …………………………………………………
    [Show full text]
  • Condensate Pump
    Condensate Pump Installation and Safety Instructions CP-NL20 CP-NL20-230 CP-NL20 CP-NL20-230 Rated 120 Volts / 60 Hz 220 Volts / 60 Hz Voltage (208-230) Rated 1.9 Amps 1.0 Amps Current Draw Input USA 3-prong plug NEMA 6-15 plug Type Head 20 . maximum 20 . maximum Height Flow Rate 1.6 GPM 1.6 GPM at Zero Head Temperature • Continuous duty 140F° • Continuous duty 140F° Rating • Max inlet temperature 160F° • Max inlet temperature 160F° • Not suitable for contact with • Not suitable for contact with steam or gasses that steam or gasses that exceed 160F° exceed 160F° Product Dimensions 11.8” x 5.9“ x 6.7” 11.8” x 5.9“ x 6.7” (LxWxH) Product 5 lbs. 5 lbs. Weight Inlet Height 4.4” (1.75” low prole) 4.4” (1.75” low prole) from Base Included • Instruction Sheet • Instruction Sheet Accessories • Stainless Steel Hang Tabs • Stainless Steel Hang Tabs • Plug Protector • Plug Protector • 4’ Remote Shuto Leads • 4’ Remote Shuto Leads with Insulated Terminals with Insulated Terminals • Polyethelene Inlet Covers (3) • Polyethelene Inlet Covers (3) Wiring Color Black - Live/Hot Brown - Live/Hot References White - Neutral Blue - Live/Hot Green - Ground Green/Yellow - Ground All installations must conform All installations must conform to NEC requirements to NEC requirements SAFETY WARNING FOLLOW ALL SAFETY INFORMATION TO REDUCE POTENTIAL ELECTRICAL SHOCK. DISCONNECT POWER BEFORE SERVICING UNIT. PUMP MUST BE PROPERLY GROUNDED. NEVER USE THE PUMP TO MOVE FLAMMABLE LIQUIDS. NEVER USE THE PUMP IN AN EXPLOSIVE GAS ENVIRONMENT, OR WHERE GAS FUMES OR VAPOR MAY BE PRESENT.
    [Show full text]
  • Installation Instructions, Model 519: 60 Hz FM3081 155408
    NOTICE TO INSTALLER: Instructions must remain with installation. FM3081 0318 Supersedes New Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 Visit our web site: TEL: (502) 778-2731 • 1 (800) 928-PUMP • FAX: (502) 774-3624 zoellerpumps.com Register your Zoeller Pump Company Product on our website: INSTALLATION INSTRUCTIONS http://reg.zoellerpumps.com/ MODEL 519 Condensate Pump 1. Inspect all materials. Occasionally, products are damaged during shipment. If the unit is damaged, contact your dealer before using. 2. Carefully read all the literature provided to familiarize yourself with specific details regarding installation and use before attempting the installation. These materials should be retained for future reference. SEE BELOW FOR LIST OF WARNINGS 1. To help reduce the risk of electrical shock, a properly grounded 4. TESTING FOR GROUND. As a safety measure, each electrical receptacle or control box of grounding type must be installed and outlet should be checked for ground using an Underwriters P/N 155408 protected by a ground fault circuit interrupter (GFCI) in accordance Laboratory Listed circuit analyzer which will indicate if the power, with the National Electrical Code and applicable local codes. If neutral and ground wires are correctly connected to your outlet. pump is wired direct, a GFCI must be installed in the control box. If they are not, call a qualified licensed electrician. (SEE WARNING BELOW) 5. Installation and checking of electrical circuits and hardware should 2.
    [Show full text]
  • IW-25 Dehumidifier Installation & Operations Manual
    IW-25 Dehumidifier Installation and Operation Manual Installation & Operations InstallationIW and-25 Operation-1 Dehumidifier Manual Manual IW-25-1 Dehumidifier Please Read and Save These Instructions Please ReadPlease Readand and Save Save These These Instructions Instructions InnovativeInnov Dehumidifierative Dehumidifier Systems, LLC Systems, LLC Innovative6260 Dehumidifier Ocean6260 Highway Ocean 17 HighwaySystems, West 17 West LLC Ocean Isle Beach, NC 28469 6260 OceanOcean Highway Isle Beach, 17 West NC 28469 910-579-DEHU910-579-DEHU Ocean Isle910 Beach,-579-3348910 NC-579 28469-3348 www.innovativedehu.comwww.innovativedehu.com 910-579-DEHU 1 910-579-33481 www.innovativedehumidifer.com Table of Contents Safety Notes 2 Identification 3 Electrical Supply 3 Principle of Operation 3 Installation 4 Operating Instructions 4 Diagram 5 Maintenance 6 Troubleshooting 8 Warranty Information 9 1 Safety Notes • The IW-25 Dehumidifier must always be connected using a grounded electrical connec- tion (as required for all electrical appliances). If non-grounded wiring is used, all liability re- verts to owner and the warranty is voided. • The IW-25 Dehumidifier should only be installed and serviced by a qualified technician. • If there is a chance that water flooded the dehumidifier, it should be opened and allowed to dry thoroughly before reconnecting to electrical power and restarting. • To ensure proper operation, no obstruction should be located within 36” of the discharge of the unit. • Do not insert any objects or fingers into the inlet or discharge. If service is required, call a qualified technician. • All work on the dehumidifier should be done with the unit “off” and unplugged or the breaker turned off.
    [Show full text]
  • Quick Start Guide
    The Watchdog900 Quick Start Guide Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com WatchDog 900 Quick Start Guide • Prepare Crawl Space for Installation • Tips for Dehumidifier Installation • Operating Instructions • Benefits of a Dehumidifier • Common Terms • Parts Diagram • Trouble Shooting • Submit Warranty • Additional Resources While you’re waiting for your new dehumidifier to arrive, here are a few topics to keep in mind. How to Prepare Your Crawl Space for Installation If you decide to install your dehumidifier in a crawl space, there are a few steps you need to take prior to installation. 1. First, you will need clean out any debris that may be cluttering up the crawl space. This will make sure that there are no hidden problems such as cracks in the foundation. It will also ensure that the vapor barrier can be installed properly. In addition, cleaning out any unnecessary items will make it much easier to move around in the crawl space. Being able to move around more easily is useful for a hassle free installation, as well as for future maintenance that may need to be done. 2. After the crawl space is clear, you will need to inspect it for any potential issues so they can be fixed prior to installation. For instance, you may notice signs of pests or rodents in the crawl space. The crawl space could also show signs of structural issues, such as damaged floor joists or girders. Most importantly, you need to ensure that all signs of excess moisture are taken care of.
    [Show full text]
  • Condensate Pumps
    ® Condensate Pumps Condensate pumps are found in a number of applications and are used Safety Switch – to collect and then move excess condensate to a suitable drain location. A safety switch is optional on some pumps and is connected to the float The majority of condensate pumps are installed in residential and in the pump reservoir. Should the pump fail or clog the higher than commercial properties or used in restaurant applications. (With Mini-Split normal condensate level in the pump reservoir will actuate the safety applications starting to gain acceptance in the North American market, switch. The safety switch is typically wired into the low voltage control look for a future MARS Tech to learn about condensate pumps for those system of a HVAC unit and will turn the system off until the issue with specialized applications.) the pump is corrected. This reduces the possibility of water damage for Some of the more common applications for condensate the property owner. pumps; Float – • Central Air-conditioning • Whole House Humidifiers The most reliable floats are made of solid plastic. Some floats that have • Condensing Gas Furnace • Mini-Split Units been used are a porous foam material which can degrade and collect • Ice Machines • Refrigeration organic matter. Once this happens the float is no longer a float. • Beverage Machines • Condensing Gas Boilers The best design for a solid plastic float is to have a stand-off molded • Drinking Fountains into the bottom of the housing so the float will not stick to any debris in The most common condensate pumps fall into the following the bottom of the reservoir.
    [Show full text]
  • Boiler Pump Condensate Pump
    TECHNICAL DATA SHEET Boiler Pump Product BP-46 and BP-46-230 Condensate Pump Application High Temperature/High Performance Condensate Pump Purpose The DiversiTech Boiler Pump is designed to automatically remove the water produced by condensing furnace and boilers that produce high temperature condensate. Can also be used for air conditioning evaporation coils, especially when high li is required. These pumps can also be used for other types of fresh water removal from refrigeration equipment, dehumidiers, water dispensers, etc. where gravity drainage is impossible. Advantages With a 1 gallon tank, this pump is constructed from a heat resistant plastic and can handle water temperatures up to 212˚F. This pump incorporates thermal overload protection and a indepen- dent high level alarm switch / boiler interlock. The check valve to prevent condensate owing back into the pump and odours from drain pipes. Features • Suitable for condensate up to 212°F • Independent high-level safety switch • Maximum ow 204 gal/hr • Maximum head 46’ • Withstands acidic condensate down to 2.8ph Maximum Condensate • Suitable for condensate up to 212°F Temperature Rated Voltage • BP-46 : 115VAC 60Hz • BP-46-230 : 230VAC 60Hz Alarm Contact Ratings • 240VAC 3A Dry Contact Input Type • USA 3-Prong molded plug (120VAC) • NEMA 6-15 plug (230VAC) Maximum Li Height • 46’ Vertical Li Flow Rate @ Zero Head • BP-46 & BP-46-230 : 204 gal/hr Dimensions • BP-46: L:12.8” x W:6.3” x H:9.8” Discharge Line • 3/8” Tank Capacity • BP-46: 1 Gallon Included Accessories • Installed Independent High Level Safety Switch Warranty • 2 Years Height Inlet Height Inlet Size Length Width Weight Cable Length 9.8 in 4.5 in 1.2 in 12.8 in 6.3 in 6.8 lbs 5.9 Reserve Model Tank Drink On O Capacity Before Alarm Level Cycle Level Level Overow BP-46 1 gal 0.39 gal 2.24 in 0.75 in 0.18 gal 4.2 in BP-46 - 230 PRV Discharge should be routed through tundish before entering the pump.
    [Show full text]
  • Heat Pump Water Heaters Selection and Quality Installation Guide
    Heat Pump Water Heaters Selection and Quality Installation Guide SPONSERED BY: Cape Light Compact PREPARED BY: June 7, 201 2 Contents 1 Background ........................................................................................................................................... 1 2 What Are Heat Pump Water Heaters? ................................................................................................ 2 3 HPWH Performance .............................................................................................................................. 3 3.1 Performance Metrics ...........................................................................................................3 3.2 Performance and Potential Savings .....................................................................................3 3.3 What Affects Performance? .................................................................................................5 3.3.1 Hot Water Usage ......................................................................................................5 3.3.2 Ambient Air Temperature ........................................................................................5 3.3.3 Inadequate Space .....................................................................................................6 3.3.4 Tank Set Point Temperature ....................................................................................6 3.4 Dehumidification .................................................................................................................6
    [Show full text]
  • Sentinel Slgr 1400X
    SENTINEL SLGR Commercial 1400X Dehumidifier SLGR Black Box Patent Pending 1.SLGRMicrochannelTechnologyforUltraEfficiency 2.EpoxyPowderCoatingforCorrosionProtection 3.QuickAccessforEasyMaintenance 4.HighCapacitywithLowPowerConsumption 5.DigitalControl 6.Built-InCondensatePump 7.QuickConnectorforDrainTube&Cable The Sentinel SLGR 1400X takes in humid air,then uses The Sentinel SLGR 1400X has a powerful, stainless steel, advanced SLGR Microchannel technology to remove the professional look… Large 8″ recessed wheels, hemmed metal moisture, and send dry air into another room via ducting. The edges, and chamfered corners. Its hinged lid swings open for easy 1400X is equipped with a built in condensate pump and drain filter change. If you are a restoration professional serious about tube so it drains automatically without the need to empty a water drying, you need an equally serious professional dehumidifier. tank. Pest Infestation & Allergen Damp environment attract spest salot.Pests like termites,ants,and cock roach can live at a house corner orin carpets undetected for a long time live do nrotting wood.Thosepest infestations bring you annoying health problems and struct ural damage. While the most serious allergen is from the fece sof the dust mite.It can survive by absorbing moistin the environment with more than 50% relative humidity level.After Sentinel SLGR 1400X installed,humidity level would be controlled under 50% undoubt edly to wipe outpestand allergen. MUSTY DAMP CRACKS Mold When the relative humidity level is 60% or higher, some placesbecome a breeding ground for mold, mildew, fungi, allergen, and dust mites.Mold and mildew are types of fungi that grow in damp environments. Oncemold appears, it grows into colonies and releases millions of spores to the air.
    [Show full text]
  • Santa Fe Rx • Free-Standing Dehumidification for Your Home
    Santa Fe Rx • Free-standing Dehumidification For Your Home Santa Fe Rx Performance and Technical Specifications STANDARD FEATURES n Automatic humidity control – 4023673 Part Number: Controlled by a dehumidistat with positive Blower: 230 CFM @ 0.0" WG “ON” and “OFF” settings and a variable Kilowatts: .68 @ 80°F, 60% RH setting range from 20% to 80% relative humidity. Supply Voltage: 115 volt – 1 phase – 60 Hz n – Prevents Amps: 6.3 Built-in defrost system freeze-up. Continues to remove down Energy Factor: 2.5 to 65°F. Operating Temp.: 65°F Min., 100°F Max. n Plugs into a standard grounded outlet Built-in defrost > 70°F – 115 VAC operation with factory installed recommended 10' power cord. Sized for: 2200 Sq. Ft. - Typical n Fan control – Blower switch permits continuous blower operation for Minimum Performance at Set Conditions filtration, independent of dehumidification. Intake Air: 80°F, 60% RH Water Removal: 86 Pints/Day @ 80°F, 60% RH n Internal condensate pump with 20' of drain hose and 15' of lift Pints/kWh: 5.2 No buckets to empty. Filter Efficiency: MERV-11 (16" x 20" x 2') n MERV-11 filtration– 65% efficient pleated filter; 100% synthetic fibers Standard 65% Efficient 1-3 microns (captures most mold spores). ASHRAE Dust Spot Test n Optional HEPA filtration – 99.97% efficient pleated filter; Micro glass Optional HEPA (MERV-16) paper mini-pleats capturing particles down to 0.3 microns in size. 99.97% A.D.S. n Optional carbon filtration– The special filter housing can hold two Power Cord: 10' – 115 volt grounded plug activated carbon and potassium permanganate blend filters and two Internal 3/16" ID x 20' of drain hose pleated filters instead of the HEPA filter.
    [Show full text]