Gleaming Ocean Student Rotation
Crew Responsibilities 1. Listen for Skippers Command to Tack or Jibe and New Point of Sail. SAILING POSITIONS 2. Respond “Ready” once prepared to change to New Point of Sail. # 6 Starboard Jib Sheet 3. Tack or Jibe - Set Sails to New Course Furl and Unfurl Jib Tack, Jibe and Trim Jib
# 3 Cabin Top # 1 Skipper # 4 Mast Tack/Jibe Mainsail Steer Boat # 5 Fore Deck Responsible for: Prepare and Raise Mainsail Direct team Lookout for Hazards Topping Lift Reef members Assist Jib in Tacking Boom Vang Practice Sailing Knots Avoid Haz- Watch Instruments ards Start / Stop Motor
# 2 Port Jib Sheet Furl and Unfurl Jib Tack, Jibe and Trim Jib
Position Descriptions # 1 Skipper # 2 Port Jib Sheet # 3 Cabin Top # 4 Mast # 5 Fore Deck 1. Give Command # 6 Starboard Jib S. Tack, Jibe and Trim Raise Mainsail Lookout for and An- Standby to Tack or Tack, Jibe and Trim Mainsail Assist Fore Deck nounce boats and Jibe, and New Point Jib to New Point of Responsible for: Reef/Un-reef Main hazards of Sail Sail Mainsheet, toping Sailing Knots: Help Jib (headsail) 2. Listen for all crew to Or lift, boom vang, start Cleat Hitch, Figure around Staysail dur- respond “ready” Release Jib Sheet to and stop motor for Eight, Bowline, Round ing Tack and Jibes 3. Yell Tack or Jibe Tack or Jibe when skipper, monitor Turn + Two Half Watch the Wind for 4. Tack or Jibe on Lazy Sheet instruments Hitches, Clove Hitch Gusts and Change in 5. Hold new course Direction