N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

List of Items

Table of contents:

02. AGA20008A - Bid Instructions 03. AGA20008A - Draft Contract List of Items

AGA20008A /LB-UE-6000836009 Page 1 of 1 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN() TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

List of Items

Line Number Unit of Quantity Required item Description Issue Delivery Date

10 1005005152412 each 2 PLATE

REFERENCES: CAGE Code Name Part Number U4574 MANROY ENGINEERING LTD A10136 10001 NAVAL ORDNANCE SYSTEMS COMMAND 296971 19204 ROCK ISLAND ARSENAL 5152412 10001 NAVAL ORDNANCE SYSTEMS COMMAND 296971 B0897 FN SA

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

20 1005011303379 each 3 LEG ,TRIPOD MOUNT

ITEM NAME...... LEG SECTION,TRIPOD MOUNT GENERAL CHARACTERISTICS ITEM DESCRIPTION...... STEEL,SHEET,CARBON,COLD ROLLED; 229.0 MM.LG FROM CENTER OF BOLT HOLE TO BOTTOM;14.2 MM.H;HEAT TREATMENT:A. AUSTENITIZE AT 850 DEGREES C.IN CARBONITRIDING ATMOSPHERE.OIL QUENCH;B. TEMPER FOR ONE HOUR TO HARDNESS SPECIFIED;WELD IAW MIL-STD-1261,CLASS 1;SURFACE TREATMENT:MANGANESE PHOSPHATE, MIL-P-16232,TYPE M,CLASS 1

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3618810016 19200 US ARMY ARMAMENT RESEARCH & 9348339 AD091 SELENIA 2000 SRL 3618810016 29697 SCHRY-WAY CASES 22843 B0897 FN HERSTAL SA

AGA20008A /LB-UE-6000836009 Page 1 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

30 1005131128955 each 17 ,SMALL ARMS

ITEM NAME...... SLING,SMALL ARMS MATERIAL...... FIBER OVERALL LENGTH...... 1070.0 MILLIMETERS MINIMUM AND 1600.0 MILLIMETERS MAXIMUM OVERALL WIDTH...... 38.0 MILLIMETERS NOMINAL COLOR...... GREEN, OLIVE SPECIAL FEATURES...... 1 SLIDING HAND WARMER OF 391.0 MILLIMETERS; 2 NYLON BLACK LOOP TYPE SC/40; 2 BLACK SNAP HOOK STEEL TYPE 2118; 2 (POLYAMIDE) RUBBER BAND.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3909203511 B0897 FN HERSTAL SA 3909203511

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

40 1005131140004 each 6 JACKET,HANDLE

ITEM NAME...... JACKET,HANDLE GENERAL CHARACTERISTICS ITEM DESCRIPTION...... PLASTIC, POLYAMIDE; BLACK 103.0

AGA20008A /LB-UE-6000836009 Page 2 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

MILLIMETERS OVERALL LENGTH; 31.0 MILLIMETERS DIAMETER; 18.1 MILLIMETERS INSIDE BORE DIAMETER; 85.0 MILLIMETERS INSIDE BORE DEPTH; 11 NERVURES AQUALLY SPACED; 4.0 MILLIMETERS THICKNESS OF NERVURE

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB 10074124 B0897 FN HERSTAL SA 05415230000556 B0897 FN HERSTAL SA 3662008120 A486G NIMIKKEISTOKESKUS NCB FINLAND B0897 FN HERSTAL SA 10074124

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

50 1005131141735 each 2 DISC,LOCKING,ELEVAT

ITEM NAME...... DISC,LOCKING,ELEVAT GENERAL CHARACTERISTICS ITEM DESCRIPTION...... ITEM USED ON TREPIEDS MAG 360 DEGREES; 74.75 MILLIMETERS MINIMUM AND 75.25 MILLIMETERS MAXIMUM DIAMETER; 1 X 18.0 MILLIMETERS NOMINAL HOLE; 17.9 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM WIDTH

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3041911411 B1662 DELTA LOGISTICS SPRL D316 722 B0897 FN HERSTAL SA 3041911411

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 3 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

60 1005131141753 each 2 SHOE,BLOCKING ELEVA

ITEM NAME...... SHOE,BLOCKING ELEVA GENERAL CHARACTERISTICS ITEM DESCRIPTION...... ITEM USED ON TREPIEDS MAG 360 DEGREES;28.1 MILLIMETERS NOMINAL WIDTH; ITEM IS PROVIDED WITH 1 X 10.0 MILLIMETERS NOMINAL THREADED COUNTERSUNK HOLE

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3041991418 B0897 FN HERSTAL SA 3041991418 B1662 DELTA LOGISTICS SPRL D316 724 B0897 FN HERSTAL SA 3041991418 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

70 1005131144551 each 2 GAGE,BREECHBLOCK,MA

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3070300003 B0897 FN HERSTAL SA 3070300003

AGA20008A /LB-UE-6000836009 Page 4 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

80 1005131162863 each 4 STOP,COCKING HANDLE

ITEM NAME ...... STOP,COCKING HANDLE OVERALL LENGTH ...... 19.0 MILLIMETERS NOMINAL OVERALL HEIGHT ...... 5.4 MILLIMETERS NOMINAL SPECIAL FEATURES ...... INJECTION POINT DEPTH 0.5 MILLIMETERS MAXIMUMREF DATA: 3612880101 FROM B0897 SPECIAL MARKINGS ...... EJECTOR MARKS DEPTH 0.15 MILLIMETERS MAXIMUM SURFACE TREATMENT ...... PHOSPHATE GENERAL CHARACTERISTICS ITEM DESCRIPTION ...... AUSTENITIZE IN NEUTRAL ATMOSPHERE, OIL QUENCH, TEMPER, HARDNESS 32-47 HRC

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3612880101 AD091 SELENIA 2000 SRL 3612880101 AD091 SELENIA 2000 SRL B0897 FN HERSTAL SA 3612880101

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 5 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

90 1005131165915 Bag 2 SPRING,HOOKED

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602020496 B0897 FN HERSTAL SA 3602020496

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

100 1005131174799 each 14 ELEVATING MECHANISM

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3041101210 B0897 FN HERSTAL SA 3041101210

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

110 1005131177595 each 85 COVER,FEED MECHANIS

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428099 B0897 FN HERSTAL SA 3602022640 A486G NIMIKKEISTOKESKUS NCB FINLAND B0897 FN HERSTAL SA 10428099

AGA20008A /LB-UE-6000836009 Page 6 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

120 1005131182079 each 13 HANDLE,GUN CHARGER

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602021996 B0897 FN HERSTAL SA 3602021996

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

130 1005131198271 each 7 BODY, LOWER PICATIN

ITEM NAME ...... BODY, LOWER PICATIN SPECIAL FEATURES ...... COMPOSED OF: 1 X 3613810010 AND 2 X 3005009870 AND 2 X 3005216122.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3613800010 B0897 FN HERSTAL SA 3613800010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 7 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

140 1005131209423 each 7 CRADLE,

ITEM NAME...... CRADLE,MACHINE GUN FUNCTIONAL DESCRIPTION...... USED FOR FN MAG OR FN MINIMI 5.56 MILLIMETERS OR FN MINIMI 7.62 MILLIMETERS. COLLOQUIAL NAME...... ELASTIC CRADLE ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042402410 B0897 FN HERSTAL SA 3042402410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

150 1005131211689 each 163 SIGHT,REAR

ITEM NAME...... SIGHT,REAR STYLE DESIGNATOR...... SIGHT, REAR, MACHINE GUN COLLOQUIAL NAME...... LEAF, REAR SIGHT 100M ASSEMBLY.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602025230 B0897 FN HERSTAL SA 3602025230

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 8 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

160 1005131211690 each 33 SIGHT,REAR

ITEM NAME...... SIGHT,REAR STYLE DESIGNATOR...... SIGHT, REAR, MACHINE GUN LENGTH...... 69.4 MILLIMETERS NOMINAL COLLOQUIAL NAME...... LEAF, REAR SIGHT 100M.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602025220 B0897 FN HERSTAL SA 3602025220

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

170 1005131211691 each 13 APERTURE,SIGHT

ITEM NAME...... APERTURE,SIGHT COLLOQUIAL NAME...... SLIDE, REAR SIGHT 100M ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602025210 B0897 FN HERSTAL SA 3602025210

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 9 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

180 1005131211704 each 29 STOCK,GUN,SHOULDER

ITEM NAME...... STOCK,GUN,SHOULDER STYLE DESIGNATOR...... STOCK, MACHINE GUN

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428752 B0897 FN HERSTAL SA 3602024510 B0897 FN HERSTAL SA 10428752 A486G NIMIKKEISTOKESKUS NCB FINLAND

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

190 1005131211715 each 26 BARREL,MACHINE GUN

ITEM NAME...... BARREL,MACHINE GUN SPECIAL FEATURES...... SET OF 1005-13-108-3104 AND 1005-13-118-9654

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602025300 B0897 FN HERSTAL SA 3602025300

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 10 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

200 1005131211719 each 1 MOUNT,MACHINE GUN

ITEM NAME...... MOUNT,MACHINE GUN SPECIAL FEATURES...... TRIPOD HEAD ASSEMBLY.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3040351410 B0897 FN HERSTAL SA 3040351410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

210 1005131211799 each 52 CLEANING KIT,GUN

ITEM NAME...... CLEANING KIT,GUN ACCESSORY COMPONENT QUANTITY....14

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3608997150 B0897 FN HERSTAL SA 3608997150

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 11 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

220 1005131212968 each 20 ADAPTER,AMMUNITION

ITEM NAME...... ADAPTER,AMMUNITION CHUTE MATERIAL...... PLASTIC NYLON COLOR...... BLACK COLLOQUIAL NAME...... BOX 100 X 7.62MM PULLER,BELT,FEED

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3689160020 B0897 FN HERSTAL SA 3689160020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

230 1005131213030 each 20 SPRING,HELICAL,COMP

ITEM NAME...... SPRING,HELICAL,COMPRESSION MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... CYLINDRICAL COIL HELIX DIRECTION...... LEFT-HAND OR RIGHT-HAND COIL QUANTITY...... 16 COLLOQUIAL NAME...... SPRING, BOLT, AMMUNITION BOX TRAY.

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3043221410 B0897 FN HERSTAL SA 3043221410 B0897 FN HERSTAL SA 3043221410 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP

AGA20008A /LB-UE-6000836009 Page 12 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

240 1005131213031 each 5 KNOB

ITEM NAME...... KNOB STYLE DESIGNATOR...... ROUND MATERIAL...... STEEL COLLOQUIAL NAME...... PLUNGER, BOLT ASSEMBLY

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3040801419 B0897 FN HERSTAL SA 3040801419 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP B0897 FN HERSTAL SA 3040801419

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

250 1005131213032 each 36 ARMAMENT SUBSYSTEM

ITEM NAME...... ARMAMENT SUBSYSTEM,GROUND VEHICLE,7.62 MILLIMETER MACHINE GUN ATTACHED WEAPON TYPE AND QUANTITY...... 1 MACHINE GUN FEED METHOD...... DISINTEGRATING METALLIC LINK BELT OPERATION METHOD...... MANUAL WEAPON SIZE DESIGNATION...... 7.62 MILLIMETER

AGA20008A /LB-UE-6000836009 Page 13 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

COLLOQUIAL NAME...... ADAPTATION KIT MAG ON VBL AND VB2L.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3608998120 B0897 FN HERSTAL SA 3608998120

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

260 1005131213033 each 10 YOKE,CRADLE,MACHINE

ITEM NAME...... YOKE,CRADLE,MACHINE GUN COLLOQUIAL NAME...... GROUP,COMPONENTS,CRADDLE VLB

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069400020 B0897 FN HERSTAL SA 3069400020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

270 1005131213034 each 33 DEFLECTOR,LINK-CART

ITEM NAME...... DEFLECTOR,LINK- CASE MATERIAL...... STEEL SURFACE TREATMENT...... PHOSPHATE COLLOQUIAL NAME...... DEFLECTOR CASES AND LINKS VBL

AGA20008A /LB-UE-6000836009 Page 14 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069370010 B0897 FN HERSTAL SA 3069370010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

280 1005131213035 each 9 CRADLE,MACHINE GUN

ITEM NAME...... CRADLE,MACHINE GUN COLLOQUIAL NAME...... CRADDLE V.B.L.,ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069410020 B0897 FN HERSTAL SA 3069410020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

290 1005131213046 each 3 YOKE,CRADLE,MACHINE

ITEM NAME...... YOKE,CRADLE,MACHINE GUN COLLOQUIAL NAME...... GROUP,COMPONENTS,CRADDLE VAB

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069400010

AGA20008A /LB-UE-6000836009 Page 15 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

B0897 FN HERSTAL SA 3069400010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

300 1005131213047 each 7 CRADLE,MACHINE GUN

ITEM NAME...... CRADLE,MACHINE GUN COLLOQUIAL NAME...... CRADDLE V.A.B. ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069410010 B0897 FN HERSTAL SA 3069410010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

310 1005131213052 each 26 DEFLECTOR,LINK-CART

ITEM NAME...... DEFLECTOR,LINK-CARTRIDGE CASE MATERIAL...... RUBBER SYNTHETIC COLLOQUIAL NAME...... DELECTOR VAB

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069490010 B0897 FN HERSTAL SA 3069490010

AGA20008A /LB-UE-6000836009 Page 16 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

320 1005131213351 each 59 SPRING,HELICAL,TORS

ITEM NAME...... SPRING,HELICAL,TORSION MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... SINGLE TORSION LEFT HAND INSIDE DIAMETER...... 8.0 MILLIMETERS NOMINAL END STYLE BOTH ENDS...... PARALLEL END COIL HELIX DIRECTION...... RIGHT-HAND COIL QUANTITY...... 5 COLLOQUIAL NAME...... SPRING,DEFLECTOR

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069640010 B0897 FN HERSTAL SA 3069640010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

330 1005131213380 each 104 ADAPTER,GUN MOUNTIN

ITEM NAME...... ADAPTER,GUN MOUNTING MATERIAL...... STEEL COLLOQUIAL NAME...... MAG MOUNTING KIT FOR PVP

AGA20008A /LB-UE-6000836009 Page 17 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3608998170 B0897 FN HERSTAL SA 3608998170

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

340 1005218956168 each 39 EJECTOR,CARTRIDGE

ITEM NAME...... EJECTOR,CARTRIDGE OVERALL LENGTH...... 128.0 MILLIMETERS NOMINAL WEAPON FOR WHICH DESIGNED...... MACHINE GUN SIZE DESIGNATION...... 5.56 MILLIMETER MODEL NUMBER...... C9 CARTRIDGE REMOVAL DIRECTION.....RIGHT-HAND

SPARE PARTS FOR MINIMI 5,56

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 361-256-002ISS5 B0897 FN HERSTAL SA 3612560021 B0897 FN HERSTAL SA C612560021 A486G NIMIKKEISTOKESKUS NCB FINLAND 10421339 B0897 FN HERSTAL SA 10421339 A486G NIMIKKEISTOKESKUS NCB FINLAND

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 18 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

350 1005219005801 each 33 FRAME,

REFERENCES: CAGE Code Name Part Number Z0003 THALES - LITHGOW 22511 B0897 FN HERSTAL SA 3615110033 G0822 HELLENIC DEFENCE SYSTEMS SA 3615110033 B0897 FN HERSTAL SA C615110033 A486G NIMIKKEISTOKESKUS NCB FINLAND 10421368 A486G NIMIKKEISTOKESKUS NCB FINLAND 10421368

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

360 1010005574621 each 13 ELEVATION MECHANISM

ITEM NAME...... ELEVATION MECHANISM END ITEM IDENTIFICATION...... MACHINE GUN,CAL. .50 (M2),NSN 1005-00-322-9715 GENERAL CHARACTERISTICS ITEM DESCRIPTION...... CONSISTS OF NUT-1,P/N 11010207; KEY-1, P/N 11010407; DIAL-1,P/N 5171492;RING-1,P/N 5174123; YOKE-1,P/N 6166497; WASHER-1,P/N 5174192; NUT-1, P/N 11010206; HANDWHEEL,TRAVERSING-1, P/N 6158375; NUT-1,P/N 5171491; POINTER-1,P/N 5139982; HANDWHEEL, ELEVATING-1,P/N 6108211; SETSCREW-1, P/N 5140612; SPRING-1,P/N 11010547; PIN-1,P/N 5171495; PIN ASSY-1,P/N 5174113; PLATE-1,P/N 5140669; PIN-1, P/N 11010522; SPRING-1,P/N 11010523; CHAIN ASSY-1,P/N 5141460; PIN-1,P/N 5139995; SCREW ASSY-1,P/N 5591828; LEVER ASSY-1,P/N 5194313; SCREW-1,P/N 5139989; WASHER-1,P/N 11010413; SPRING-1,P/N 8412295; SCREW-1,P/N 5140383;STOP-1,P/N 8408768; RING-1,P/N 5140137; RING-1,P/N 5140485; PIN-1,P/N MS16562-120; STOP-1,P/N 5189756

AGA20008A /LB-UE-6000836009 Page 19 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number U4574 MANROY ENGINEERING LTD A10721 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 1005005574621 19200 US ARMY ARMAMENT RESEARCH & 5574621 A486G NIMIKKEISTOKESKUS NCB FINLAND 5574621 B0897 FN HERSTAL SA

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

370 1398131211721 each 52 HOLDER ASSEMBLY,AMM

ITEM NAME...... HOLDER ASSEMBLY,AMMUNITION COLLOQUIAL NAME...... AMMUNITION BOX, TRAY ASSEMBLY.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042903500 B0897 FN HERSTAL SA 3042903500

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

380 3040131141734 each 39 BRACKET,EYE,ROTATIN

ITEM NAME...... BRACKET,EYE,ROTATING SHAFT MATERIAL...... STEEL BORE INSIDE DIAMETER...... 9.4 MILLIMETERS MINIMUM AND 9.6

AGA20008A /LB-UE-6000836009 Page 20 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

MILLIMETERS MAXIMUM WIDTH...... 39.95 MILLIMETERS MINIMUM AND 40.0 MILLIMETERS MAXIMUM SPECIAL FEATURES...... ITEM IS INTERNALLY 6.0 MILLIMETERS THREADED. 9.0 MILLIMETERS MINIMUM AND 11.0 MILLIMETERS MAXIMUM THREAD LENGTH.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3041812418 B0897 FN HERSTAL SA 3041812418

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

390 4933010473394 each 20 REAMERS,CLEANING

ITEM NAME...... REAMERS,CLEANING END ITEM IDENTIFICATION...... M240 AND M240C MACHINE GUN. MATERIAL...... STEEL GENERAL CHARACTERISTICS ITEM DESCRIPTION...... ONE NUMBER 1 CLEANING REAMER 11826281, ONE NUMBER 14 CLEANING REAMER 11826282, AND ONE CLEANING REAMER RING 11826283

REFERENCES: CAGE Code Name Part Number 19200 US ARMY ARMAMENT RESEARCH & 11826036 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 4933010473394 B0897 FN HERSTAL SA 11826036 19200 US ARMY ARMAMENT RESEARCH &

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 21 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

400 4933131111493 each 46 CLEANING TOOL,OBTUR

ITEM NAME...... CLEANING TOOL,OBTURATOR VENT GENERAL CHARACTERISTICS ITEM DESCRIPTION...... SCRAPER FOR REGULATOR SLEEVE END ITEM IDENTIFICATION...... MACHINE GUN MAG

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428352 B0897 FN HERSTAL SA 3050710008 B0897 FN HERSTAL SA 3052001824 A486G NIMIKKEISTOKESKUS NCB FINLAND B0897 FN HERSTAL SA 10428352

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

410 4933131211625 each 163 ELEVATION MECHANISM

ITEM NAME...... CLEANING TOOL,BARREL BEARING COLLOQUIAL NAME...... COMBINED SCRAPER AND TOOL OREA 78/1

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3050785010 B0897 FN HERSTAL SA 3050785010

AGA20008A /LB-UE-6000836009 Page 22 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

420 5120131034828 each 78 WRENCH,SPANNER

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428326 B0897 FN HERSTAL SA 0REA3040-00 B0897 FN HERSTAL SA 3052000830 B0897 FN HERSTAL SA 3050372001 A486G NIMIKKEISTOKESKUS NCB FINLAND B0897 FN HERSTAL SA 10428326

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

430 5120131128954 each 29 PLIERS ASSEMBLY,FRO

ITEM NAME...... PLIERS ASSEMBLY,FRO GENERAL CHARACTERISTICS ITEM DESCRIPTION...... COPOSED OF 4 ITEMS.1 EA BODY,TOOL, FRONT SIGHT : P/N 3052005823 2 EA SCREW BODY ADJUSTING: P/N 3052005851.2 EA SPRING, PIN, SLOTTED: P/N 3000009278.1 EA HEXAGON SOCKET HEAD CAP SCREW: P/N 3000403117.

AGA20008A /LB-UE-6000836009 Page 23 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3052530000 B0897 FN HERSTAL SA 3052531008 B0897 FN HERSTAL SA 3052530000

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

440 5120131140740 each 7 BUSH FOR OREA 801

ITEM NAME...... BUSH FOR OREA 801 MATERIAL...... C60 OVERALL LENGTH...... 32.0 MILLIMETERS NOMINAL OVERALL DIAMETER...... 40.0 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10094288 B0897 FN HERSTAL SA 3058000008 B0897 FN HERSTAL SA OREA800 B0897 FN HERSTAL SA 10094288 A486G NIMIKKEISTOKESKUS NCB FINLAND

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

450 5120131140742 each 7 TIP AND BLADE ASSEM

AGA20008A /LB-UE-6000836009 Page 24 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10094310 B0897 FN HERSTAL SA 3058060009 B0897 FN HERSTAL SA OREA806 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10094310

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

460 5210131128892 each 3 GAGE,BREECHBORE,MACHINE GUN

ITEM NAME...... GAGE,BREECHBORE,MACHINE GUN GENERAL CHARACTERISTICS ITEM DESCRIPTION...... USED TO CHECK WEAR OF BARREL-WARNING AND REJECTS (); STEEL ROLIKE ITEM; THREE PARTS:ONE AND TWO ARE BRAZED WITH OVERALL LENGHT: 125.0 MILLIMETERS PART THREE: EXTENSION WITH EYE IS SCREWED INTO PART TWO. GAGE ( PART ONE) DIAMETER: 5.65 MILLIMETERS NOMINAL AND GAGE LENGHT: 25.0 MILLIMETERS NOMINAL.

END ITEM: GAUGES MINIMI 5,56

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3070180007 B0897 FN HERSTAL SA CB259 A486G NIMIKKEISTOKESKUS NCB FINLAND 10421535 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10421535

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 25 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

470 5220131140756 each 13 GAUGE, HOL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3662006895 B0897 FN HERSTAL SA 3662006895

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

480 5220131148194 each 13 GAGE,BREECHBLOCK

ITEM NAME...... GAGE,BREECHBLOCK MATERIAL...... STEEL OVERALL LENGTH...... 47.63 MILLIMETERS NOMINAL OVERALL WIDTH...... 20.42 MILLIMETERS MINIMUM AND 20.52 MILLIMETERS MAXIMUM OVERALL HEIGHT...... 25.4 MILLIMETERS NOMINAL THREAD SIZE AND SERIES/TYPE DESIGNATOR...... C-6.32-2B UN SPECIAL MARKINGS...... NR 1671; GO-084; NO GO .088-2.24

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 1671 B0897 FN HERSTAL SA 3662006880 B0897 FN HERSTAL SA 1671

AGA20008A /LB-UE-6000836009 Page 26 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

490 5305130100532 each 13 SCREW,SHOULDER

ITEM NAME...... SCREW,SHOULDER THREAD SERIES DESIGNATOR...... UNF NOMINAL THREAD DIAMETER...... 0.25 INCHES THREAD QUANTITY PER INCH...... 28 THREAD CLASS...... 3A THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 6.8 MILLIMETERS NOMINAL FASTENER LENGTH...... 31.98 MILLIMETERS MINIMUM AND 32.22 MILLIMETERS MAXIMUM MATERIAL OVERALL...... ALUMINUM ALLOY SURFACE TREATMENT OVERALL...... ANODIZE HARDNESS RATING OVERALL...... 140.0 BRINELL STANDARD MINIMUM AND 160.0 BRINELL STANDARD MAXIMUM MINIMUM YIELD STRENGTH...... 420.0 NEWTONS PER SQUARE MILLIMETER HEAD STYLE...... FLAT CHAMFER HEAD DIAMETER...... 17.36 MILLIMETERS MINIMUM AND 17.52 MILLIMETERS MAXIMUM HEAD HEIGHT...... 1.88 MILLIMETERS MINIMUM AND 2.12 MILLIMETERS MAXIMUM INTERNAL DRIVE STYLE...... HIGH-TORQUE SHOULDER SHAPE OVERALL...... ROUND SHOULDER DIAMETER OVERALL...... 7.94 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM SHOULDER LENGTH OVERALL...... 23.53 MILLIMETERS MINIMUM AND 23.67 MILLIMETERS MAXIMUM

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428255 B0897 FN HERSTAL SA 3602003651 B0897 FN HERSTAL SA MA160H B0897 FN HERSTAL SA 10428255 A486G NIMIKKEISTOKESKUS NCB FINLAND

AGA20008A /LB-UE-6000836009 Page 27 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

500 5305131140785 each 20 SCREW,MACHINE

ITEM NAME ...... SCREW,MACHINE THREAD DIRECTION ...... RIGHT-HAND THREAD LENGTH ...... 11.15 MILLIMETERS MINIMUM AND 11.55 MILLIMETERS MAXIMUM HOLE DIAMETER ...... 2.32 MILLIMETERS MINIMUM AND 2.38 MILLIMETERS MAXIMUM NOMINAL THREAD DIAMETER ...... 6.0 MILLIMETERS SPECIAL FEATURES ...... 63 ROCKWELL A MINIMUM AND 69 ROCKWELL MAXIMUM HARDNESS RATING;USED ON MACHINE GUN MINIMI FOR GAS CONTROL THREAD SERIES DESIGNATOR ...... M

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3611331128 A486G NIMIKKEISTOKESKUS NCB FINLAND 10420720 AD091 SELENIA 2000 SRL 3611331128 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10420720

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 28 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

510 5305131140790 each 85 SCREW,MACHINE

ITEM NAME ...... SCREW,MACHINE THREAD DIRECTION ...... RIGHT-HAND THREAD LENGTH ...... 11.15 MILLIMETERS MINIMUM AND 11.55 MILLIMETERS MAXIMUM HOLE DIAMETER ...... 2.77 MILLIMETERS MINIMUM AND 2.83 MILLIMETERS MAXIMUM NOMINAL THREAD DIAMETER ...... 6.0 MILLIMETERS SPECIAL FEATURES ...... 63 ROCKWELL A MINIMUM AND 69 ROCKWELL A MAXIMUM HARDNESS RATING:USED ON MACHINE GUN MINIMI FOR GAS CONTROL THREAD SERIES DESIGNATOR ...... M

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3611331625 A486G NIMIKKEISTOKESKUS NCB FINLAND 10421248 AD091 SELENIA 2000 SRL 3611331625 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10421248

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

520 5305131140791 each 137 SCREW,MACHINE

ITEM NAME...... SCREW,MACHINE THREAD SERIES DESIGNATOR...... M THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 11.15 MILLIMETERS MINIMUM AND 11.55 MILLIMETERS MAXIMUM HOLE DIAMETER...... 2.87 MILLIMETERS MINIMUM AND 2.93 MILLIMETERS MAXIMUM SPECIAL FEATURES...... 63 ROCKWELL A MINIMUM AND 69 ROCKWELL A MAXIMUM HARDNESS RATING;USED ON MACHINE GUN MINIMI FOR GAS CONTROL

AGA20008A /LB-UE-6000836009 Page 29 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10421249 B0897 FN HERSTAL SA 3611331720 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10421249

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

530 5305131162117 each 104 SCREW,EXTERNALLY RE

ITEM NAME...... SCREW,EXTERNALLY RELIEVED BODY

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10093008 B0897 FN HERSTAL SA 3662004656 B0897 FN HERSTAL SA 05415230002208 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10093008

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

540 5305131164365 each 150 SCREW,CAP,SOCKET HE

ITEM NAME...... SCREW,CAP,SOCKET HEAD THREAD SERIES DESIGNATOR...... UNF

AGA20008A /LB-UE-6000836009 Page 30 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

NOMINAL THREAD DIAMETER...... 4.826 MILLIMETERS THREAD PITCH IN MILLIMETERS.....0.7937 THREAD CLASS...... 2B HEAD STYLE...... KNURLED NO. 1 HEAD DIAMETER...... 11.35 MILLIMETERS NOMINAL HEAD HEIGHT...... 4.7 MILLIMETERS NOMINAL SPECIAL FEATURES...... STYL: 47-COUNTERBORE UNTHREATEDAAWY: MILLIMETERS; NOMINAL;ABQJ: 22-POINTLESS

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428778 B0897 FN HERSTAL SA 3602011445 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10428778

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

550 5305131166514 each 104 SCREW,MACHINE

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10093009 B0897 FN HERSTAL SA 3662004669 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10093009

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 31 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

560 5305131211697 each 117 SCREW,CAP,SOCKET HE

ITEM NAME...... SCREW,CAP,SOCKET HEAD THREAD SERIES DESIGNATOR...... ISO M THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 2.9 MILLIMETERS NOMINAL FASTENER LENGTH...... 5.0 MILLIMETERS NOMINAL MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE HEAD STYLE...... PAN NO. 2 HEAD DIAMETER...... 7.0 MILLIMETERS NOMINAL HEAD HEIGHT...... 2.8 MILLIMETERS NOMINAL INTERNAL DRIVE STYLE...... HEXAGON WIDTH ACROSS FLATS...... 2.5 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602025510 B0897 FN HERSTAL SA 3602025510

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

570 5305131211698 Bag 124 SET SCREW

ITEM NAME...... SETSCREW THREAD SERIES DESIGNATOR...... ISO M THREAD DIRECTION...... RIGHT-HAND FASTENER LENGTH...... 5.0 MILLIMETERS NOMINAL MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE HEAD STYLE...... HEADLESS (SETSCREW) INTERNAL DRIVE STYLE...... HEXAGON WIDTH ACROSS FLATS...... 2.0 MILLIMETERS NOMINAL POINT STYLE...... FLAT POINT DIAMETER...... 2.5 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3000404034 B0897 FN HERSTAL SA 3000404034

AGA20008A /LB-UE-6000836009 Page 32 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

580 5305131211700 Bag 13 SCREW,CAP,SOCKET HE

ITEM NAME...... SCREW,CAP,SOCKET HEAD THREAD SERIES DESIGNATOR...... ISO M THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 20.5 MILLIMETERS NOMINAL FASTENER LENGTH...... 25.0 MILLIMETERS NOMINAL MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE HEAD STYLE...... PAN NO. 2 HEAD DIAMETER...... 16.0 MILLIMETERS NOMINAL HEAD HEIGHT...... 10.0 MILLIMETERS NOMINAL INTERNAL DRIVE STYLE...... HEXAGON WIDTH ACROSS FLATS...... 8.0 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428761 B0897 FN HERSTAL SA 3000403830 I9008 I.S.O. ISO4762-M10X25-8.8-PHOSPHATED B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10428761

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 33 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

590 5305131213049 each 20 SCREW,CAP,SOCKET HE

ITEM NAME...... SCREW,CAP,SOCKET HEAD THREAD SERIES DESIGNATOR...... ISO M THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 51.0 MILLIMETERS NOMINAL FASTENER LENGTH...... 2.8 MILLIMETERS NOMINAL MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE HEAD STYLE...... FLAT FILLISTER HEAD DIAMETER...... 22.0 MILLIMETERS NOMINAL HEAD HEIGHT...... 2.8 MILLIMETERS NOMINAL INTERNAL DRIVE STYLE...... HEXAGON WIDTH ACROSS FLATS...... 10.0 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069420010 B0897 FN HERSTAL SA 3069420010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

600 5305131213053 each 13 SCREW,MACHINE

ITEM NAME...... SCREW,MACHINE THREAD SERIES DESIGNATOR...... ISO M NOMINAL THREAD DIAMETER...... 10.0 MILLIMETERS THREAD DIRECTION...... RIGHT-HAND THREAD LENGTH...... 18.0 MILLIMETERS NOMINAL FASTENER LENGTH...... 20.0 MILLIMETERS NOMINAL SCREW MATERIAL...... STEEL HEAD STYLE...... DEE HEAD DIAMETER...... 30.0 MILLIMETERS NOMINAL HEAD HEIGHT...... 15.0 MILLIMETERS NOMINAL DISTANCE FROM CENTERLINE TO FLAT12.5 MILLIMETERS NOMINAL INTERNAL DRIVE STYLE...... W/O INTERNAL DRIVE

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069440020

AGA20008A /LB-UE-6000836009 Page 34 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

B0897 FN HERSTAL SA 3069440020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

610 5306131152048 Bag 46 BOLT,MACHINE

ITEM NAME...... BOLT,MACHINE THREAD DIRECTION...... RIGHT-HAND FASTENER LENGTH...... 27.7 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM MATERIAL OVERALL...... STEEL COMP XC38 THREAD LENGTH...... 14.5 MILLIMETERS MINIMUM AND 15.5 MILLIMETERS MAXIMUM THREAD SERIES DESIGNATOR...... M NOMINAL THREAD DIAMETER...... 6.0 MILLIMETERS THREAD PITCH IN MILLIMETERS.....1.0 EXTERNAL THREAD TOLERANCE CLASS.6G. SURFACE TREATMENT OVERALL...... PHOSPHATE

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3042751412 B0897 FN HERSTAL SA 3042751412 B0897 FN HERSTAL SA A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3042751412

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 35 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

620 5310131182473 Bag 59 WASHER,SPRING TENSI

ITEM NAME...... WASHER,SPRING TENSION SPECIAL FEATURES...... WL10 NF E 25-517; HARDNESS 44-50 HRC

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428762 B0897 FN HERSTAL SA 3000304026 A486G NIMIKKEISTOKESKUS NCB FINLAND 10428762 B0897 FN HERSTAL SA

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

630 5310131211795 Bag 241 WASHER,LOCK

ITEM NAME...... WASHER,LOCK MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE STYLE DESIGNATOR...... FLAT INTERNAL TEETH HOLE DIAMETER...... 4.3 MILLIMETERS NOMINAL OUTSIDE DIAMETER...... 8.0 MILLIMETERS NOMINAL MATERIAL THICKNESS...... 0.5 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3000323090 B0897 FN HERSTAL SA 3000323090

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 36 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

640 5310131213069 each 26 WASHER,FLAT

ITEM NAME...... WASHER,FLAT MATERIAL OVERALL...... STEEL HOLE DIAMETER...... 20.5 MILLIMETERS NOMINAL PERIPHERAL SHAPE STYLE...... ROUND OVERALL DIAMETER...... 30.0 MILLIMETERS NOMINAL CENTER HOLE SHAPE STYLE...... ROUND CROSS-SECTIONAL SHAPE STYLE.....RECTANGULAR THICKNESS...... 1.0 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602026360 B0897 FN HERSTAL SA 3602026360

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

650 5310131213323 each 26 NUT,PLAIN,ROUND

ITEM NAME...... NUT,PLAIN,ROUND THREAD SERIES...... ISO M NOMINAL THREAD SIZE...... 16.0 MILLIMETERS THREAD DIRECTION...... RIGHT-HAND MATERIAL OVERALL...... STEEL NUT STYLE...... ROUND NUT DIAMETER...... 30.0 MILLIMETERS NOMINAL NUT THICKNESS...... 15.0 MILLIMETERS NOMINAL COLLOQUIAL NAME...... NUT RIGHT SHAFT

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069510010 B0897 FN HERSTAL SA 3069510010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 37 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

660 5315130100570 Bag 65 5315130100570 PIN,LOCK MAG 58 0.79 armem

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10428133 B0897 FN HERSTAL SA 3012002864 B0897 FN HERSTAL SA STA0251-00 B0897 FN HERSTAL SA 3602022720 B0897 FN HERSTAL SA MA62 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10428133

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

670 5315131138440 Bag 137 PIN,LOCK

ITEM NAME...... PIN,SPRING MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... OIL AND PHOSPHATE HARDNESS RATING OVERALL...... 72.0 ROCKWELL A MINIMUM AND 76.0 ROCKWELL A MAXIMUM STYLE DESIGNATOR...... SLOTTED OVERALL LENGTH...... 10.0 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM DIAMETER...... 3.3 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM MATERIAL THICKNESS...... 0.6 MILLIMETERS NOMINAL SPECIAL FEATURES...... OVERALL; SPRING STEEL 55 S 7 OR OVERALL STEEL 1070 TO 1095

AGA20008A /LB-UE-6000836009 Page 38 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3000009682 B0897 FN HERSTAL SA 3000009682

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

680 5315131141742 each 2 KEY,MACHINE

ITEM NAME...... KEY,MACHINE MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... STEPPED OVERALL HEIGHT...... 19.85 MILLIMETERS MINIMUM AND 20.15 MILLIMETERS MAXIMUM FLAT HEIGHT...... 9.75 MILLIMETERS MINIMUM AND 10.25 MILLIMETERS MAXIMUM MOUNTING HOLE TYPE AND QUANTITY.2 PLAIN MOUNTING HOLE DIAMETER...... 15.0 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM AND 9.0 MILLIMETERS NOMINAL MOUNTING HOLE DEPTH...... 19.82 MILLIMETERS MINIMUM AND 20.15 MILLIMETERS MAXIMUM STARTING EDGE SHAPE...... ROUND STARTING EDGE RADIUS...... 14.5 MILLIMETERS MINIMUM AND 15.5 MILLIMETERS MAXIMUM SPECIAL FEATURES...... ITEM IS PROVIDED WITH 2 ROUNDED STEPS THE OTHER STEP IS 36.8 MILLIMETERS MINIMUM AND 37.2 MILLIMETERS MAXIMUM HEIGHT.

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3041941417 B0897 FN HERSTAL SA 3041941417 B0897 FN HERSTAL SA A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3041941417

AGA20008A /LB-UE-6000836009 Page 39 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

690 5315131152051 Bag 4 PIN,STRAIGHT,HEADLE

ITEM NAME...... PIN,STRAIGHT,HEADLESS MATERIAL OVERALL...... STEEL MATERIAL DOCUMENT AND CLASSIFICATION OVERALL...... DWG 3041442411 NATIONAL SPEC SINGLE MATERIAL RESPONSE SURFACE TREATMENT OVERALL...... PHOSPHATE SURFACE TREATMENT DOCUMENT AND CLASSIFICATION OVERALL...... DWG 3041442411 NATIONAL SPEC SINGLE TREATMENT RESPONSE FIRST END STYLE...... COUNTERSUNK FIRST END COUNTERSINK DIAMETER..6.2 MILLIMETERS MINIMUM AND 6.4 MILLIMETERS MAXIMUM FIRST END COUNTERSINK ANGLE.....140.0 DEGREES NOMINAL SECOND END RELATIONSHIP WITH FIRST END...... IDENTICAL PIN OVERALL LENGTH...... 17.9 MILLIMETERS MINIMUM AND 18.1 MILLIMETERS MAXIMUM PIN OVERALL DIAMETER...... 6.978 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3041442411 B0897 FN HERSTAL SA 3041442411

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 40 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

700 5315131154923 Bag 3 PIN,STRAIGHT,HEADLE

ITEM NAME...... PIN,STRAIGHT,HEADLESS MATERIAL OVERALL...... STEEL MATERIAL DOCUMENT AND CLASSIFICATION OVERALL...... DIN9 SMNPB36 ETIRE NATIONAL SPEC SINGLE MATERIAL RESPONSE SURFACE TREATMENT OVERALL...... PHOSPHATE FIRST END STYLE...... CHAMFERED FIRST END TAPER LENGTH...... 0.5 MILLIMETERS NOMINAL FIRST END TAPER ANGLE...... 45.0 DEGREES NOMINAL SECOND END RELATIONSHIP WITH FIRST END...... NOT IDENTICAL SECOND END STYLE...... OVAL SECOND END OUTER RADIUS...... 5.5 MILLIMETERS MINIMUM AND 6.5 MILLIMETERS MAXIMUM HOLE ARRANGEMENT STYLE...... ONE END DRILLED FIRST HOLE DIAMETER...... 3.95 MILLIMETERS MINIMUM AND 4.05 MILLIMETERS MAXIMUM DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN...... 8.8 MILLIMETERS MINIMUM AND 9.2 MILLIMETERS MAXIMUM PIN OVERALL LENGTH...... 45.5 MILLIMETERS MINIMUM AND 46.5 MILLIMETERS MAXIMUM PIN OVERALL DIAMETER...... 7.442 MILLIMETERS NOMINAL AND 7.558 MILLIMETERS MAXIMUM

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3043212415 B0897 FN HERSTAL SA 3043212415 B0897 FN HERSTAL SA A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3043212415

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 41 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

710 5315131201011 each 2 PIN,STRAIGHT,HEADED

ITEM NAME...... PIN,STRAIGHT,HEADED MATERIAL OVERALL...... 34CR NI MO 6 SURFACE TREATMENT OVERALL...... PHOSPHATE COATING, OIL TREATMENT ACCORDING TO QST 87612 HARDNESS RATING OVERALL...... 72-76 HRA

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3686850010 A486G NIMIKKEISTOKESKUS NCB FINLAND 10420837 AD091 SELENIA 2000 SRL 3686850010 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10420837

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

720 5315131201037 each 2 PIN,RETAINING

ITEM NAME...... PIN,RETAINING MATERIAL OVERALL...... OTEVA 70 SURFACE TREATMENT OVERALL...... PHOSPHATE COATING OIL TREATMENT ACCORDING TO QST 87612, HYDROGEN EMBRITTLEMENT RELIEF ACCORDING TO QST 88130; SPECIAL FEATURES...... DIAMETER: 3 MILLIMETERS;

AGA20008A /LB-UE-6000836009 Page 42 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3686670010 A486G NIMIKKEISTOKESKUS NCB FINLAND 10420816 AD091 SELENIA 2000 SRL 3686670010 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10420816

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

730 5315131207841 each 12 PIN,LOCK

ITEM NAME...... PIN,LOCK MATERIAL OVERALL...... STEEL COMP 302 STYLE DESIGNATOR...... LOCK WIRE STOCK DIAMETER...... 2.8 MILLIMETERS NOMINAL OPENING WIDTH...... 20.00 MILLIMETERS NOMINAL PRONG LENGTH...... 48.00 MILLIMETERS NOMINAL SPECIAL FEATURES...... ONE LOOP LEFT

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3632211440 B0897 FN HERSTAL SA 05415230000686 B0897 FN HERSTAL SA 05415230000686

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 43 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

740 5315131209676 each 15 PIN,GROOVED,HEADLES

ITEM NAME...... PIN,GROOVED,HEADLESS MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE STYLE DESIGNATOR...... GROOVE

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042702410 B0897 FN HERSTAL SA 3042702410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

750 5315131211712 each 20 PIN,GROOVED,HEADED

ITEM NAME...... PIN,GROOVED,HEADED MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... GROOVE DIAMETER...... 4.03 MILLIMETERS NOMINAL EFFECTIVE LENGTH...... 18.07 MILLIMETERS NOMINAL UNDERCUT DIAMETER...... 3.7 MILLIMETERS NOMINAL UNDER HEAD LENGTH...... 19.8 MILLIMETERS NOMINAL UNDERCUT WIDTH...... 0.7 MILLIMETERS NOMINAL FIRST END STYLE...... CHAMFERED FIRST END TAPER LENGTH...... 0.5 MILLIMETERS NOMINAL FIRST END TAPER ANGLE...... 45.0 DEGREES NOMINAL HEAD STYLE...... FLAT CHAMFER PIN HEAD DIAMETER...... 6.0 MILLIMETERS NOMINAL HEIGHT...... 20.8 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3141460020 B0897 FN HERSTAL SA 3141460020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 44 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

760 5315131211797 Bag 3 PIN,SPRING

ITEM NAME...... PIN,SPRING MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE STYLE DESIGNATOR...... SLOTTED OVERALL LENGTH...... 20.0 MILLIMETERS NOMINAL DIAMETER...... 4.35 MILLIMETERS NOMINAL MATERIAL THICKNESS...... 0.8 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3000009600 B0897 FN HERSTAL SA 3000009600

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

770 5315131213038 each 19 PIN,STRAIGHT,HEADLE

ITEM NAME...... PIN,STRAIGHT,HEADLESS MATERIAL OVERALL...... STEEL FIRST END STYLE...... ROUND SECOND END RELATIONSHIP WITH FIRST END...... IDENTICAL COLLOQUIAL NAME...... FRONT PIN ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069470010 B0897 FN HERSTAL SA 3069470010

AGA20008A /LB-UE-6000836009 Page 45 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

780 5315131213043 each 4 PIN,STRAIGHT,HEADLE

ITEM NAME...... PIN,STRAIGHT,HEADLESS MATERIAL OVERALL...... STEEL FIRST END STYLE...... ROUND SECOND END RELATIONSHIP WITH FIRST END...... IDENTICAL COLLOQUIAL NAME...... PIN ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069050020 B0897 FN HERSTAL SA 3069050020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

790 5315131213061 each 6 PIN,STRAIGHT,HEADED

ITEM NAME...... PIN,STRAIGHT,HEADED HEAD STYLE...... EYE STYLE DESIGNATOR...... STRAIGHT MATERIAL OVERALL...... STEEL COLLOQUIAL NAME...... PIN ASSEMBLY,WEAPON,FOR P4

AGA20008A /LB-UE-6000836009 Page 46 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602026380 B0897 FN HERSTAL SA 3602026380

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

800 5315131213064 each 8 PIN,GROOVED,HEADLES

ITEM NAME...... PIN,GROOVED,HEADLESS MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... GROOVE FIRST END STYLE...... CHAMFERED COLLOQUIAL NAME...... FRONT PIN ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602026470 B0897 FN HERSTAL SA 3602026470

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

810 5315131213066 each 13 PIN,GROOVED,HEADLES

ITEM NAME...... PIN,GROOVED,HEADLESS MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... GROOVE

AGA20008A /LB-UE-6000836009 Page 47 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

FIRST END STYLE...... CHAMFERED COLLOQUIAL NAME...... REAR PIN ASSEMBLY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602026460 B0897 FN HERSTAL SA 3602026460

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

820 5315131213068 each 21 PIN,STRAIGHT,HEADED

ITEM NAME...... PIN,STRAIGHT,HEADED HEAD STYLE...... EYE STYLE DESIGNATOR...... STRAIGHT MATERIAL OVERALL...... STEEL COLLOQUIAL NAME...... PIN ASSEMBLY,WEAPON,FOR PVP

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602026350 B0897 FN HERSTAL SA 3602026350

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

830 5315131213349 each 5 PIN,STRAIGHT,HEADED

ITEM NAME...... PIN,STRAIGHT,HEADED

AGA20008A /LB-UE-6000836009 Page 48 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

UNDER HEAD LENGTH...... 130.5 MILLIMETERS NOMINAL DIAMETER...... 7.5 MILLIMETERS NOMINAL HEAD STYLE...... FLAT STYLE DESIGNATOR...... STRAIGHT MATERIAL OVERALL...... STEEL CHAMFER LENGTH...... 0.5 MILLIMETERS NOMINAL PIN CHAMFER ANGLE...... 45.0 DEGREES NOMINAL PIN HEAD DIAMETER...... 10.0 MILLIMETERS NOMINAL HEIGHT...... 3.0 MILLIMETERS NOMINAL COLLOQUIAL NAME...... SHAFT, DEFLECTOR

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3069560010 B0897 FN HERSTAL SA 3069560010

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

840 5315218777838 each 26 PIN,SPRING

ITEM NAME ...... PIN,SPRING OVERALL LENGTH ...... 20.0 MILLIMETERS NOMINAL DIAMETER ...... 2.0 MILLIMETERS NOMINAL MATERIAL THICKNESS ...... 0.4 MILLIMETERS NOMINAL MATERIAL OVERALL ...... STEEL SURFACE TREATMENT OVERALL ...... PHOSPHATE

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602011798 B0897 FN HERSTAL SA 3602011798

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 49 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

850 5325131152369 each 13 RING,RETAINING

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3618330025 AD091 SELENIA 2000 SRL 3618330025 B0897 FN HERSTAL SA 3618330025 AD091 SELENIA 2000 SRL

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

860 5325131211796 each 319 RING,RETAINING

ITEM NAME...... RING,RETAINING RING STYLE...... EXTERNAL CROSS-SECTIONAL SHAPE STYLE.....RECTANGULAR USAGE DESIGN...... EXTERNAL CASEHARDENING INDICATOR...... NOT CASEHARDENED INSIDE DIAMETER...... 3.7 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3000309150 B0897 FN HERSTAL SA 3000309150

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 50 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

870 5340131141390 each 20 CLAMP,BRIDGE

ITEM NAME...... CLAMP,BRIDGE MATERIAL OVERALL...... STEEL SURFACE TREATMENT OVERALL...... PHOSPHATE STYLE DESIGNATOR...... FLAT HOLE DEPTH...... 6.0 MILLIMETERS MINIMUM AND 6.2 MILLIMETERS MAXIMUM OVERALL LENGTH...... 42.0 MILLIMETERS MINIMUM AND 42.4 MILLIMETERS MAXIMUM OVERALL WIDTH...... 19.8 MILLIMETERS MINIMUM AND 20.2 MILLIMETERS MAXIMUM MATERIAL THICKNESS...... 6.0 MILLIMETERS NOMINAL INSIDE LENGTH...... 30.05 MILLIMETERS MINIMUM AND 30.45 MILLIMETERS MAXIMUM SPECIAL FEATURES...... ITEM IS PROVIDED WITH A RECTANGULAR HOLE 14.1 MILLIMETERS MINIMUM AND 14.3 MILLIMETERS MAXIMUM LENGTH. 8.05 MILLIMETERS MINIMUM AND 8.25 MILLIMETERS MAXIMUM WIDTH.

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3041371414 B0897 FN HERSTAL SA 3041371414

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

880 5340131209424 each 65 BRACKET,MOUNTING

AGA20008A /LB-UE-6000836009 Page 51 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042423410 B0897 FN HERSTAL SA 3042423410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

890 5340131209677 Bag 104 LEG SECTION,TRIPOD MOUNT

ITEM NAME...... CLIP,RETAINING STYLE DESIGNATOR...... PIN

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042632410 B0897 FN HERSTAL SA 3042632410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

900 5340131211713 each 280 PLUNGER,DETENT

ITEM NAME...... PLUNGER,DETENT LENGTH...... 20.55 MILLIMETERS NOMINAL DIAMETER...... 3.0 MILLIMETERS NOMINAL COLLOQUIAL NAME...... LATCH, FRONT SIGHT

AGA20008A /LB-UE-6000836009 Page 52 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3141470020 B0897 FN HERSTAL SA 3141470020

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

910 5355130100592 each 20 KNOB

ITEM NAME...... KNOB STYLE DESIGNATOR...... BEEHIVE OUTSIDE DIAMETER...... 14.86 MILLIMETERS MINIMUM AND 15.02 MILLIMETERS MAXIMUM OVERALL THICKNESS...... 11.98 MILLIMETERS MINIMUM AND 12.2 MILLIMETERS MAXIMUM ATTACHMENT METHOD...... HOLE PIN ACCOMMODATION TYPE...... STRAIGHT PIN TYPE W/PIN GRIPPING SURFACE CONDITION...... SMOOTH MATERIAL...... PLASTIC POLYAMIDE

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3602001471 B0897 FN HERSTAL SA MA28B B0897 FN HERSTAL SA 3602001471

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 53 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

920 5360131211714 each 143 SPRING,HELICAL,COMP

ITEM NAME...... SPRING,HELICAL,COMPRESSION MATERIAL OVERALL...... STEEL STYLE DESIGNATOR...... CYLINDRICAL END STYLE BOTH ENDS...... SPRING END,PLAIN COIL HELIX DIRECTION...... LEFT-HAND OR RIGHT-HAND COIL QUANTITY...... 8 COLLOQUIAL NAME...... SPRING, INDEX WINDAGE

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10379009 B0897 FN HERSTAL SA 3141480020 B0897 FN HERSTAL SA 10379009 A486G NIMIKKEISTOKESKUS NCB FINLAND

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

930 5365131141871 Bag 85 SPACER,PLATE

ITEM NAME...... SPACER,PLATE MATERIAL...... STEEL OVERALL THICKNESS...... 0.45 MILLIMETERS MINIMUM AND 0.55 MILLIMETERS MAXIMUM APERTURE WIDTH...... 8.05 MILLIMETERS MINIMUM AND 8.2 MILLIMETERS MAXIMUM APERTURE LENGTH...... 14.1 MILLIMETERS MINIMUM AND 14.3 MILLIMETERS MAXIMUM OUTSIDE DIAMETER...... 19.75 MILLIMETERS MINIMUM AND 20.25 MILLIMETERS MAXIMUM INSIDE CORNER RADIUS...... 1.5 MILLIMETERS NOMINAL

REFERENCES: CAGE Code Name Part Number A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3041394411 B0897 FN HERSTAL SA 3041394411 A00AM E.C.A ETABLISSEMENT CENTRAL DES APP 3041394411 B0897 FN HERSTAL SA

AGA20008A /LB-UE-6000836009 Page 54 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

940 5365131211720 each 78 RING,CONNECTING,ROU

ITEM NAME...... RING,CONNECTING,ROUND COLLOQUIAL NAME...... RING, LOCKING PIN

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3042721410 B0897 FN HERSTAL SA 3042721410

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

950 8105131172834 each 39 BAG,ORDNANCE WEAPON

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3662007243 B0897 FN HERSTAL SA 3662007243

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

AGA20008A /LB-UE-6000836009 Page 55 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

Line Stock Number Unit of Quantity Required item Description Issue Delivery Date

960 8465130100489 Bag 26 CASE,MAINTENANCE EQ

REFERENCES: CAGE Code Name Part Number A486G NIMIKKEISTOKESKUS NCB FINLAND 10397092 B0897 FN HERSTAL SA 3050980007 B0897 FN HERSTAL SA OREA98 B0897 FN HERSTAL SA 3052001703 B0897 FN HERSTAL SA MA1558 B0897 FN HERSTAL SA A486G NIMIKKEISTOKESKUS NCB FINLAND 10397092

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

970 8465131162885 each 150 ,COLLAPSIBL

ITEM NAME ...... BAG,AMMUNITION ACCESSORY COMPONENTS AND QUANTITY ...... POUCH - 1COVER STRIP, END - 2COVER STRIP, SIDE R.H. - 1COVER STRIP, SIDE L.H. - 1PIN, PIVOT - 1CLIP, SPRING - 1MOULDING, PLASTIC - 1

Sacoche souple 200 cartouches pour MINIMI

REFERENCES: CAGE Code Name Part Number B0897 FN HERSTAL SA 3619052107 B0897 FN HERSTAL SA 3619052107

AGA20008A /LB-UE-6000836009 Page 56 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300 N S P A AGENCE OTAN DE SOUTIEN ET D'ACQUISITION NATO SUPPORT AND PROCUREMENT AGENCY

Quality assurance requirements: This contract shall meet the AQAP 2131 requirements (NATO Quality Assurance Requirements for Final Inspection). These requirements also apply to all sub-contractors involved in this contract.

GQA HEADER: Government Quality Assurance is not required for this contract. The Contractor must provide a Certificate of Conformity (CoC). Template to be used is to be found in AQAP2070. In case the contractor is not the manufacturer, the contractor shall provide a copy of the COC received from the manufacturer.

AGA20008A /LB-UE-6000836009 Page 57 of 57 NATO UNCLASSIFIED NSPA L-8302 CAPELLEN(Luxembourg) TEL:(+352)3063(+ext.) FAX:(+352)3063 4300