PROCEEDINGS of the ICA CONGRESS (Onl the ICA PROCEEDINGS OF

Total Page:16

File Type:pdf, Size:1020Kb

PROCEEDINGS of the ICA CONGRESS (Onl the ICA PROCEEDINGS OF ine) - ISSN 2415-1599 ISSN ine) - PROCEEDINGS OF THE ICA CONGRESS (onl THE ICA PROCEEDINGS OF Page intentionaly left blank 22nd International Congress on Acoustics ICA 2016 PROCEEDINGS Editors: Federico Miyara Ernesto Accolti Vivian Pasch Nilda Vechiatti X Congreso Iberoamericano de Acústica XIV Congreso Argentino de Acústica XXVI Encontro da Sociedade Brasileira de Acústica 22nd International Congress on Acoustics ICA 2016 : Proceedings / Federico Miyara ... [et al.] ; compilado por Federico Miyara ; Ernesto Accolti. - 1a ed . - Gonnet : Asociación de Acústicos Argentinos, 2016. Libro digital, PDF Archivo Digital: descarga y online ISBN 978-987-24713-6-1 1. Acústica. 2. Acústica Arquitectónica. 3. Electroacústica. I. Miyara, Federico II. Miyara, Federico, comp. III. Accolti, Ernesto, comp. CDD 690.22 ISSN 2415-1599 ISBN 978-987-24713-6-1 © Asociación de Acústicos Argentinos Hecho el depósito que marca la ley 11.723 Disclaimer: The material, information, results, opinions, and/or views in this publication, as well as the claim for authorship and originality, are the sole responsibility of the respective author(s) of each paper, not the International Commission for Acoustics, the Federación Iberoamaricana de Acústica, the Asociación de Acústicos Argentinos or any of their employees, members, authorities, or editors. Except for the cases in which it is expressly stated, the papers have not been subject to peer review. The editors have attempted to accomplish a uniform presentation for all papers and the authors have been given the opportunity to correct detected formatting non-compliances. Hecho en Argentina Made in Argentina Asociación de Acústicos Argentinos, AdAA Camino Centenario y 5006, Gonnet, Buenos Aires, Argentina http://www.adaa.org.ar Proceedings of the 22th International Congress on Acoustics ICA 2016 5-9 September 2016 Catholic University of Argentina, Buenos Aires, Argentina ICA 2016 has been organised by the Ibero-american Federation of Acoustics (FIA) and the Argentinian Acousticians Association (AdAA) on behalf of the International Commission for Acoustics. The program incorporates the X Ibero-american Federation of Acoustics Congress, the XIV Argentine Congress of Acoustics, and the XXVI Meeting of the Brazilian Acoustical Society The purpose of the ICA is to promote international development and collaboration in all fields of acoustics including research, development, education, and standardisation. It fulfils this mission by maintaining contacts with national and regional acoustical societies and associations; convening the International Congresses on Acoustics; sponsoring special international meetings. The Commission is affiliated to the International Union for Pure and Applied Physics; the International Union of Applied and Theoretical Mechanics and the International Council of Scientific Unions. The Ibero-American Federation of Acoustics (Federación Iberoamericana de Acústica – FIA) is a non-profit scientific association, created in October 1995, in Valdivia –Chile, being its members the Acoustical Societies of the Spanish and Portuguese speaking countries. It seeks to to establish links between acoustics associations, private and public companies, scientific institutes and universities, syndicates, etc. To this end it organizes congresses, workshops, courses and meetings and promotes cooperation agreements The Argentinian Acousticians Association (AdAA) is a non-profit academic organization that aims to raise awareness of the worth and utility of Acoustics in its many areas and applications by bringing together scientists, professionals, interested people and organizations. To this end it encourages research and exchange of knowledge in all fields of acoustics, organizes meetings and congresses as well as activities for the general public such as the Week of Sound. The Society was founded in 1976, so this year it celebrates its 40th anniversary. 1 Welcome Message from Marion Burgess President, International Commission of Acoustics, 2013-2016 It is with great pleasure that on behalf of the International Commission for Acoustics I welcome you to the ICA 2016 in Buenos Aires. The selection of the hosts for the congress of the ICA is undertaken 6 years before the actual event and since that time there have been three Presidents of the ICA. However the organising committee has worked throughout this time to bring to fruition this congress. That committee comprised the Ibero- american Federation of Acoustics (FIA) and the Argentinian Acousticians Association (AdAA), in cooperation with the Chilean Acoustics Society (SOCHA). We thank the efforts of the committee for working on this congress over so many years and in particular thank the Congress President, Jorge Patricio and the Congress Secretary General Nilda Vechiatti. The International Congress on Acoustics provides the opportunity only once every three years for all those around the world who are working in all areas of acoustics to meet, discuss and exchange ideas. We hope that during the congress you will benefit from the opportunity for cross disciplinary discussion. The five plenary lectures provide insights into five very different areas of acoustics. This highlights the breadth of the coverage of the presentations at the congress. The main program involves the presentations in a range of special topic areas and structured sessions. The technical exhibition provides the opportunity to see the latest advances in instrumentation and products related to acoustics. The ICA provides grants to support the participation of some Young Scientists at the congress. We are delighted that additional funding from the International Union for Pure and Applied Physics (IUPAP) has been used to extend the Young Scientists support scheme. This is the first time that the ICA has been held in South America so it is a wonderful opportunity for those from other parts of the world to learn more about the work being undertaken in these countries. It also provides the opportunity to learn more about the cultural and social life of Argentina and, perhaps for some, the opportunity to also travel to the nearby countries. Thank you to all those who have worked and continue to work on the arrangements for this congress and, equally importantly, thank you to those who are participating and presenting their work to colleagues. 2 Welcome Message from Jorge Patricio President, Iberomaerican Federation of Acoustics, President, International Congress on Acoustics It is with great pleasure that I welcome you all to the 22nd International Congress on Acoustics, ICA 2016, that is being held in Buenos Aires, Argentina, between 5th and 9th, September, 2016. This congress is one of the most important forums for those around the world working in all areas of Acoustics. It makes an outstanding opportunity to meet, discuss, exchange ideas, and establish partnerships, thus promoting the research and development of this scientific branch of Knowledge, in order to duly serve the needs of the Human being. Jointly, with the ICA2016, it will also be held the X Ibero- american Federation of Acoustics Congress (FIA 2016), incorporating the XIV Argentinean Congress of Acoustics and the XXVI Meeting of the Brazilian Acoustical Society. The ICA 2016 Congress is organized by the Ibero-american Federation of Acoustics (FIA) and the Argentinian Acousticians Association (AdAA), in cooperation with the Chilean Acoustics Society (SOCHA), under the endorsement of the International Commission for Acoustics (ICA). It is officially sponsored by the Acoustical Society of America (ASA), the International Union of Pure and Applied Physics (IUPAP), and the National Council of Acoustical Consultants (NCAC), Institutions to whom I express my deepest gratitude. Although we are currently suffering strange and unexpected turbulences worldwide, Acoustics still remains as an area of scientific and technical knowledge with strong dynamism. That is evident in the almost 600 papers to be presented in the frame of the Congress, among which 5 plenary lectures deserve the utmost attention since they deal with the latest developments in emergent scientific fields. A technical exhibition of materials, products, equipment and services of innovative character, presented by several companies to whom I thank for their participation and interest, will also be a key mark of the Congress. Within the ICA umbrella, two short courses are planned to occur. Also, as satellite event, a Symposium on Room and Musical Acoustics will be held immediately after ICA 2016, in the Argentinian city of La Plata. The accompanying persons programme, scheduled for these days, and the various social activities, turn this attendance into an excellent and unique opportunity to enjoy the Congress, and a chance to visit the magnificent and astonishing city of Buenos Aires, the Paris of South America with its culture and history, being proud to host their visitors with hospitality and a smile of hope in the future. Finally, and on behalf of the organizing team of ICA 2016, I want to stress my deepest thanks for your participation, as well as for the involvement of all supporting institutions and persons with a special mention to Prof. Nilda Vechiatti (Secretary General of ICA 2016) for her dedication, commitment and work. So, on behalf of ICA 2016 organization and the Ibero-american Federation of Acoustics, I wish you all an excellent stay in Buenos Aires, in Argentina and in South America. 3 Welcome Message from Nilda Vechiatti President, Argentinian Acousticians
Recommended publications
  • Best LIFE Environment Projects 2015
    RONM VI EN N T E P E R O F I J L E C T T S S E B Best LIFE Environment projects 2015 LIFE Environment Environment LIFE ENVIRONMENT | BEST LIFE ENVIRONMENT PROJECTS 2015 EUROPEAN COMMISSION ENVIRONMENT DIRECTORATE-GENERAL LIFE (“The Financial Instrument for the Environment”) is a programme launched by the European Commission and coordinated by the Environment and Climate Action Directorates-General. The Commission has delegated the im- plementation of many components of the LIFE programme to the Executive Agency for Small and Medium-sized Enterprises (EASME). The contents of the publication “Best LIFE Environment Projects 2015” do not necessarily reflect the opinions of the institutions of the European Union. Authors: Gabriella Camarsa (Environment expert), Justin Toland, Jon Eldridge, Wendy Jones, Joanne Potter, Stephen Jones, Stephen Nottingham, Marianne Geater, Isabelle Rogerson, Derek McGlynn, Carlos de la Paz (NEEMO EEIG), Eva Martínez (NEEMO EEIG, Communications Team Coordinator). Managing Editor: Hervé Martin (European Commission, Environment DG, LIFE D.4). LIFE Focus series coordination: Simon Goss (LIFE Communications Coordinator), Valerie O’Brien (Environment DG, Publications Coordinator). Technical assistance: Chris People, Luule Sinnisov, Cristóbal Gines (NEEMO EEIG). The following people also worked on this issue: Davide Messina, François Delceuillerie (Environment DG, LIFE Unit), Giulia Carboni (EASME, LIFE Unit). Production: Monique Braem (NEEMO EEIG). Graphic design: Daniel Renders, Anita Cortés (NEEMO EEIG). Photos database: Sophie Brynart (NEEMO EEIG). Acknowledgements: Thanks to all LIFE project beneficiaries who contributed comments, photos and other useful material for this report. Photos: Unless otherwise specified; photos are from the respective pro- jects. For reproduction or use of these photos, permission must be sought directly from the copyright holders.
    [Show full text]
  • Town of South Hadley, Ma 2019 Street Listing V No
    TOWN OF SOUTH HADLEY, MA 2019 STREET LISTING V NO. APT. NAME BORN OCCUPATION PCT V NO. APT. NAME BORN OCCUPATION PCT ABBEY LN ABBEY ST Con't U 125 CLEGG COLIN H 12/22/1992 CONCRETE FINISH E D 1 ROSARIO NORMA 04/08/1971 HOME MAKER E D 125 CLEGG SHEILA 08/13/1954 UNDERWRITER E D 1 SANTIAGO JUAN R 11/27/1995 STUDENT E U 130 CRAWFORD WALTER H 11/17/1950 HUMAN SERV E 1 SANTIAGO THALIAN 03/17/1998 STUDENT E U 130 ROBINSON PATRICIA E 09/20/1946 HUMAN RES DIR E U 3 KALVINEK JENNIFER P 07/26/1971 SEAMSTRESS E U 132 NAPIORKOWSKI LISA A 05/15/1967 COA ASST DIR E 3 SPINNEY PAYTON 12/09/1994 UNKNOWN E U 132 NAPIORKOWSKI THOMAS A 01/28/1965 SHIPPING/RECEIV E D 5 GARCIA SARAH P 11/26/1980 AT HOME E U 134 STJACQUES BARBARA J 08/11/1957 ADMIN ASST E D 5 GONZALEZ ONIX O 09/14/1980 UNKNOWN E U 134 STJACQUES PAUL L 05/12/1954 MECHANIC E U 7 RIVERA LIZ J 04/24/1988 UNKNOWN E U 137 TAYLOR MAUREEN A 12/02/1955 HOMEMAKER E U 9 ALVES ROBERT A 04/08/1953 UNKNOWN E U 137 TAYLOR THOMAS B 10/08/1953 SHEET METAL E 9 BOISVERT WILLIAM 07/01/1955 UNKNOWN E U 139 KUROWSKI LINDA R 04/01/1947 LIBRARIAN E 9 LEWIS ROBERT 11/27/1954 UNKNOWN E U 140 VANKRUININGEN SHARON A 04/23/1960 CUSTOMER SERVIC E 9 PETE ROBERT 05/12/1937 UNKNOWN E R 143 BRUSO LINDSAY M 06/02/1986 OPTICAL TECH E 9 SCANLON SHAUN 09/18/1957 UNKNOWN E R 143 BRUSO JEREMY H 04/27/1984 SALES E 11 ALEXANDER KAREN 07/27/1953 DISABLED E R 147 LAMONTAGNE SEAN L 05/02/1968 MECHANICAL ENG E 11 GEMME LILLIAN 08/24/1928 DISABLED E R 147 LAMONTAGNE ROXANNE M 01/28/1966 DISABLED E R 11 LAROCHE DEBRA L 12/30/1956 DISABLED
    [Show full text]
  • Johnson Noise and Shot Noise: the Determination of the Boltzmann Constant, Absolute Zero Temperature and the Charge of the Electron
    Johnson Noise and Shot Noise: The Determination of the Boltzmann Constant, Absolute Zero Temperature and the Charge of the Electron MIT Department of Physics (Dated: September 3, 2013) In electronic measurements, one observes \signals," which must be distinctly above the \noise." Noise induced from outside sources may be reduced by shielding and proper \grounding." Less noise means greater sensitivity with signal/noise as the figure of merit. However, there exist fundamental sources of noise which no clever circuit can avoid. The intrinsic noise is a result of the thermal jitter of the charge carriers and the quantization of charge. The purpose of this experiment is to measure these two limiting electrical noises. From the measurements, values of the Boltzmann constant and the charge of the electron will be derived. PREPARATORY QUESTIONS By the end of the 19th century, the accumulated ev- idence from chemistry, crystallography, and the kinetic Please visit the Johnson and Shot Noise chapter on the theory of gases left little doubt about the validity of the 8.13x website at mitx.mit.edu to review the background atomic theory of matter. Nevertheless, there were still material for this experiment. Answer all questions found arguments against the atomic theory, stemming from a in the chapter. Work out the solutions in your laboratory lack of "direct" evidence for the reality of atoms. In fact, notebook; submit your answers on the web site. there was no precise measurement yet available of the quantitative relation between atoms and the objects of direct scientific experience such as weights, meter sticks, EXPERIMENT GOALS clocks, and ammeters.
    [Show full text]
  • Tm Synchronization and Channel Coding—Summary of Concept and Rationale
    Report Concerning Space Data System Standards TM SYNCHRONIZATION AND CHANNEL CODING— SUMMARY OF CONCEPT AND RATIONALE INFORMATIONAL REPORT CCSDS 130.1-G-3 GREEN BOOK June 2020 Report Concerning Space Data System Standards TM SYNCHRONIZATION AND CHANNEL CODING— SUMMARY OF CONCEPT AND RATIONALE INFORMATIONAL REPORT CCSDS 130.1-G-3 GREEN BOOK June 2020 TM SYNCHRONIZATION AND CHANNEL CODING—SUMMARY OF CONCEPT AND RATIONALE AUTHORITY Issue: Informational Report, Issue 3 Date: June 2020 Location: Washington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and reflects the consensus of technical panel experts from CCSDS Member Agencies. The procedure for review and authorization of CCSDS Reports is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-4). This document is published and maintained by: CCSDS Secretariat National Aeronautics and Space Administration Washington, DC, USA Email: [email protected] CCSDS 130.1-G-3 Page i June 2020 TM SYNCHRONIZATION AND CHANNEL CODING—SUMMARY OF CONCEPT AND RATIONALE FOREWORD This document is a CCSDS Report that contains background and explanatory material to support the CCSDS Recommended Standard, TM Synchronization and Channel Coding (reference [3]). Through the process of normal evolution, it is expected that expansion, deletion, or modification of this document may occur. This Report is therefore subject to CCSDS document management and change control procedures, which are defined in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-4). Current versions of CCSDS documents are maintained at the CCSDS Web site: http://www.ccsds.org/ Questions relating to the contents or status of this document should be sent to the CCSDS Secretariat at the email address indicated on page i.
    [Show full text]
  • Sound Masking Done Right: Simple Solutions for Complex Problems
    SOUND MASKING DONE RIGHT: SIMPLE SOLUTIONS FOR COMPLEX PROBLEMS Robert Chanaud, Ph.D. Magnum Publishing L.L.C. i Copyright 2008, Robert Chanaud, All Rights Reserved Published with permission by Magnum Publishing, LLC No part of this book may be reproduced, stored in a retrieval system, or transmitted in any other form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of the publishers. While every effort has been made to ensure that the contents of this document are accurate and reliable, Magnum Publishing LLC, Robert Chanaud, or Atlas Sound L.P. cannot assume liability for any damages caused by inaccuracies in the data or documentation, or as a result of the failure of the data, documentation, software, or products described herein to function in a particular manner. The authors and publishers make no warranty, expressed or implied, nor does the fact of distribution constitute a warranty. International Standard Book Number: 978-0-9818166-0-9 Printed in the United States of America ii - Sound Masking Done Right: Simple Solutions for Complex Problems - About Bob Chanaud Dr. Robert C. Chanaud received his BS from the US Coast Guard Academy, his MS from the University of California and his PhD from Purdue University. Active in the field of acoustics since 1958, he taught at Purdue University and the University of Colorado and, in 1975, founded Dynasound, Inc. He has developed software programs to facilitate the design and equalization of masking systems. Acknowledgements The following companies have graciously supplied products for evaluation: Atlas Sound Cambridge Sound Management Dynasound Soft dB Sound Advance Notation Square brackets [ ] are references contained at the end of the manual.
    [Show full text]
  • Understanding Jitter and Wander Measurements and Standards Second Edition Contents
    Understanding Jitter and Wander Measurements and Standards Second Edition Contents Page Preface 1. Introduction to Jitter and Wander 1-1 2. Jitter Standards and Applications 2-1 3. Jitter Testing in the Optical Transport Network 3-1 (OTN) 4. Jitter Tolerance Measurements 4-1 5. Jitter Transfer Measurement 5-1 6. Accurate Measurement of Jitter Generation 6-1 7. How Tester Intrinsics and Transients 7-1 affect your Jitter Measurement 8. What 0.172 Doesn’t Tell You 8-1 9. Measuring 100 mUIp-p Jitter Generation with an 0.172 Tester? 9-1 10. Faster Jitter Testing with Simultaneous Filters 10-1 11. Verifying Jitter Generator Performance 11-1 12. An Overview of Wander Measurements 12-1 Acronyms Welcome to the second edition of Agilent Technologies Understanding Jitter and Wander Measurements and Standards booklet, the distillation of over 20 years’ experience and know-how in the field of telecommunications jitter testing. The Telecommunications Networks Test Division of Agilent Technologies (formerly Hewlett-Packard) in Scotland introduced the first jitter measurement instrument in 1982 for PDH rates up to E3 and DS3, followed by one of the first 140 Mb/s jitter testers in 1984. SONET/SDH jitter test capability followed in the 1990s, and recently Agilent introduced one of the first 10 Gb/s Optical Channel jitter test sets for measurements on the new ITU-T G.709 frame structure. Over the years, Agilent has been a significant participant in the development of jitter industry standards, with many contributions to ITU-T O.172/O.173, the standards for jitter test equipment, and Telcordia GR-253/ ITU-T G.783, the standards for operational SONET/SDH network equipment.
    [Show full text]
  • NTGAN: Learning Blind Image Denoising Without Clean Reference
    RUI ZHAO, DANIEL P.K. LUN, KIN-MAN LAM: NTGAN 1 NTGAN: Learning Blind Image Denoising without Clean Reference Rui Zhao Department of Electronic and [email protected] Information Engineering, Daniel P.K. Lun The Hong Kong Polytechnic University, [email protected] Hong Kong, China Kin-Man Lam [email protected] Abstract Recent studies on learning-based image denoising have achieved promising perfor- mance on various noise reduction tasks. Most of these deep denoisers are trained ei- ther under the supervision of clean references, or unsupervised on synthetic noise. The assumption with the synthetic noise leads to poor generalization when facing real pho- tographs. To address this issue, we propose a novel deep unsupervised image-denoising method by regarding the noise reduction task as a special case of the noise transference task. Learning noise transference enables the network to acquire the denoising ability by only observing the corrupted samples. The results on real-world denoising benchmarks demonstrate that our proposed method achieves state-of-the-art performance on remov- ing realistic noises, making it a potential solution to practical noise reduction problems. 1 Introduction Convolutional neural networks (CNNs) have been widely studied over the past decade in various computer vision applications, including image classification [13], object detection [29], and image restoration [35]. In spite of high effectiveness, CNN models always require a large-scale dataset with reliable reference for training. However, in terms of low-level vision tasks, such as image denoising and image super-resolution, the reliable reference data is generally hard to access, which makes these tasks more challenging and difficult.
    [Show full text]
  • MARK Serv Grap GLOB 2013 EUROCOM Catalog EN V8 2013
    EUROCOM The New Standard for Installed Systems Summer 2013 EUROCOM The EUROCOM Story Innovative Tools Discover EUROCOM, the new for Modern standard for installed systems: Systems Integrators New ideas, breathtaking technologies, a unique design aesthetic, fl exibility – and tremendous value! I’m often asked why BEHRINGER customers love our made them tick. I quickly realized that companies were Over the past two decades we have with a diff erent sales and distribution Longtime BEHRINGER observers will products so much. The answer is simple… it’s because charging US$1000 or more for a piece of equipment, heard from many customers who model, terms of sale, marketing and recognize our EUROLIVE, EURODESK we are so passionate about everything we do. while the components inside were only worth US$100! have used our products in installed support requirements. We recognized and EUROPOWER product family Our customers tell us what they want, and we design sound systems. After all, system early on that the nature of project-driven names. The origin of these names So I immediately grabbed my soldering iron and went to and build products that sound great and provide integrators and contractors are always sales diff ers considerably from that of stems from our roots as a small work on my fi rst signal processor. Word spread quickly amazing feature sets—at extremely aff ordable prices! looking for products that deliver a retail sales and that our organization startup in Germany, hence the among friends that my products sounded really good. would need to adapt in name—EURO. So, of course when It all started 29 years ago when I was studying classical More importantly, I found out that my friends were very order to fully and properly it came time to name the family piano and sound engineering.
    [Show full text]
  • High-Quality Self-Supervised Deep Image Denoising
    High-Quality Self-Supervised Deep Image Denoising Samuli Laine Tero Karras Jaakko Lehtinen Timo Aila NVIDIA∗ NVIDIA NVIDIA, Aalto University NVIDIA Abstract We describe a novel method for training high-quality image denoising models based on unorganized collections of corrupted images. The training does not need access to clean reference images, or explicit pairs of corrupted images, and can thus be applied in situations where such data is unacceptably expensive or im- possible to acquire. We build on a recent technique that removes the need for reference data by employing networks with a “blind spot” in the receptive field, and significantly improve two key aspects: image quality and training efficiency. Our result quality is on par with state-of-the-art neural network denoisers in the case of i.i.d. additive Gaussian noise, and not far behind with Poisson and impulse noise. We also successfully handle cases where parameters of the noise model are variable and/or unknown in both training and evaluation data. 1 Introduction Denoising, the removal of noise from images, is a major application of deep learning. Several architectures have been proposed for general-purpose image restoration tasks, e.g., U-Nets [23], hierarchical residual networks [20], and residual dense networks [31]. Traditionally, the models are trained in a supervised fashion with corrupted images as inputs and clean images as targets, so that the network learns to remove the corruption. Lehtinen et al. [17] introduced NOISE2NOISE training, where pairs of corrupted images are used as training data. They observe that when certain statistical conditions are met, a network faced with the impossible task of mapping corrupted images to corrupted images learns, loosely speaking, to output the “average” image.
    [Show full text]
  • Meeting Minutes Page 1 of 22
    DEPARTMENT OF HEALTH BOARD OF RESPIRATORY CARE GENERAL BUSINESS MEETING GENERAL RULES REVIEW July 13, 2012 Minutes Grand Hyatt Tampa Bay 2900 Bayport Drive Tampa, FL 33607 (813) 874-1234 Call the Meeting to Order and Roll Call: Bayyinah Sherrod, RRT, Chair, called the general business meeting to order at 8:30 a.m. Those present for the meeting, included the following: Members Present Staff Present Bayyinah Sherrod, RRT, Chair Allen Hall, Executive Director Bradley Killion, RRT Jessica Sapp, Program Operations Administrator Dick Fields, RRT Kevin Barrett, CRT Board Counsel Rachel Clark, Board Counsel Consumer Member Office of the Attorney General Shawnta Friday-Stroud, Ph.D., Vice Chair Douglas Dolan, Board Counsel Office of the Attorney General Excused Absent Member Peter Hendriksen, RRT Prosecuting Attorney Cecilie Sykes, DOH, Court Reporter: Assistant General Counsel Dempster & Berryhill Court Reporting Penny Appleton 501 E. Kennedy Blvd Tampa, FL 33602 (813) 229-8225 Dr. Rivenbark was present on behalf of the Professionals Resource Network, Inc. (PRN). To accommodate individuals wishing to address the Board, the Board Chair may adjust the sequence of the agenda items. The minutes reflect the actual sequence of events rather than the original agenda order. DISCIPLINARY PROCEEDINGS Due to participation in the Probable Cause Panel, Ms. Sherrod was recused from Tabs 10 and 11. Dr. Friday-Stroud was directed to chair said Tabs. Mr. Fields was recused from Tabs 1 through 9. MOTION FOR BOARD’S FINAL ORDER AFTER HEARING NOT INVOLVING DISPUTED ISSUES OF MATERIAL FACT TAB 1 Rainey Benton Brown, RRT, DOH Case No: 2011-19366 July 13, 2012 - General Business Meeting Minutes Page 1 of 22 Informal Hearing, (PCP Members – Fields, Nunez) Respondent was present and sworn in by the court reporter.
    [Show full text]
  • SAR Image Despeckling Based on Convolutional Denoising Autoencoder
    SAR Image Despeckling Based on Convolutional Denoising Autoencoder Zhang Qianqian1 Sun Ruizhi2,* PhD student, Professor, College of Information and Electrical Engineering, College of Information and Electrical Engineering, China Agricultural University China Agricultural University Beijing, P.R. China Beijing, P.R. China e-mail: [email protected] *Corresponding author: e-mail: [email protected] Abstract—In Synthetic Aperture Radar (SAR) imaging, availability of noise in the SAR images has obvious influence despeckling is very important for image analysis,whereas speckle that complicates the obtaining and analysis process timely[1], is known as a kind of multiplicative noise caused by the coherent as results depend strongly on the implementation of imaging system. During the past three decades, various subsequent tasks (object detection, classification, segmentation, algorithms have been proposed to denoise the SAR image. and so on). Also, the denoising process is disturbing the Generally, the BM3D is considered as the state of art technique quality of the original images which may lead to poor to despeckle the speckle noise with excellent performance. More decisions either by humans or machines. Therefore, the goal of recently, deep learning make a success in image denoising and noise removal or reduction in the SAR image should take achieved a improvement over conventional method where large accuracy into high consideration as much as possible. train dataset is required. Unlike most of the images SAR image despeckling approach, the proposed approach learns the speckle SAR image despeckling, conventional problem in the field from corrupted images directly. In this paper, the limited scale of computer vision, has been extensively studied by of dataset make a efficient exploration by using convolutioal researchers.
    [Show full text]
  • What Is Different? Between Impulse Noise and Electrical Fast Transient Burst】
    【What is different? Between Impulse Noise and Electrical Fast Transient Burst】 The Inquiry about "a distinction between an impulse noise simulator (following and our company model INS series) and a Fast transient Burst simulator (following and our company model FNS series)" is one of the major questions in a lot of quries from customers. Herewith the difference is focused and presented. The phenomenon which are reproduced and backgraound Both INS and FNS reproduce phenomenon of back electromotive energy noise which may be generated in ON/OFF of power supply switching (like a gas insulated braker and/or electromagnetism relay, etc.). INS was introduced by Mr. Manohar L.Tandor (at that time worked in I.B.M) as a simulator of the high frequency noise to data processing apparatus in the 1960s, and the computer maker of those days adopted it in the 1970s, and it spread widely. FNS is indicated as a basic standard of the immunity type test which reproduces the malfunction by the noise phenomenon of switching ON/OFF and adopted not only in Europe but also world-wide. The 1st edition of Standard for this test was issued as IEC801-4 in IEC TC65 (Industrial Process Controls) in 1988. Then, in order to adopt to all the electric devices, IEC1000-4-4 was issued in 1995. Moreover, in order to differenciate the numbering between ISO and IEC, “60000” has been added to the Stadanrd number. Consequently, it has been named as IEC61000-4-4. output waveform Rise time / the pulse width [INS] It is a rectangular wave whose pulse width is 50ns-1μs and rise time is less than 1ns.
    [Show full text]