01 Category 5E/6 UTP Solid Cables

Category 5e/6 UTP Solid Cables

Applications D-Link Category 5e and Category 6 solid cables Applications 10BASE-T, 100BASE-TX Fast Ethernet, are the best twisted-pair cables in the market for As streaming video and multimedia over LAN 1000BASE-T (IEEE 802.3) transmitting data over local area networks (LANs). are gaining popularity, users demand faster data These CAT5e/CAT6 cables exceed performance transmission and reduced waiting time. D-Link 100VG-AnyLAN (IEEE 802.12) requirements specified by the TIA/EIA-568B.2 and Category 5e/6 cables are ideal for simple, cost- 550 MHz Broadband Video IEC 60603-7-4 standards (Category 5e Class D). The effective and high-speed transmission performance. Voice, T1, ISDN Cat 5e/6 cables are made using 4 Unshielded Twisted They support a higher signal-to-noise ratio, providing 155/ 622 Mbps ATM Pairs (UTP) of 100 ohm impedance and are protected better reliability for current applications and higher Power over Ethernet (POE) by a plastic outer jacket. data rates for future applications. Category 5e Cable CAT5e and CAT6 cables are suitable for applications The Category 5e cable, an enhanced version of such as basic voice services, token ring, PoE and Category 5, adheres to more stringent standards ATM (at up to 155 Mbit/s, over short distances). The specified by TIA/EIA-568B.2 and IEC 60603-7-4. These CAT6 cables meet several key criteria for efficient and cables are made using 24 gauge (AWG) copper wires effective high-speed networks for 1 Gigabit Ethernet. with about three twists per inch enabling them to With 1 Gigabit backbones installed, companies can transmit data at 1000 Mbps (~1 Gigabit per second) provide 1 Gigabit Ethernet service to workstations with a frequency of 100 MHz. The CAT5e cables are in order to support applications such as streaming suitable for 10BASE-T, 100BASE-TX Fast Ethernet and video, medical imaging and centralized applications. 1000BASE-T Gigabit Ethernet. Category 6 Cable The Category 6 cable is backward compatible with Category 5/5e and Category 3 specifications. Compared to its predecessors, CAT6 cables reduce crosstalk and system noise. The superior insulation around the 23 gauge (AWG) copper wires attribute to the increased performance. The CAT6 cables can transmit data at 1000 Mbps (~1 Gigabit per second) with a frequency of 250 MHz. The CAT6 cables are suitable for 10BASE-T, 100BASE-TX Fast Ethernet and 1000BASE-T / 1000BASE-TX (Gigabit Ethernet).

CAT5e/6 Solid Cables

01 Ethernet Cables

CAT5e

CAT5e Cable CAT5e Modular Connector CAT5e Patch Cord

CAT6

CAT6 Cable CAT6 Modular Connector CAT6 Patch Cord

02 Ethernet Cables

Specifications CAT5e (Patch Cord) CAT5e ( Solid Cable) CAT6 (Patch Cord) CAT6 ( Solid Cable)

Cable Conductor 24 AWG, Stranded 24 AWG, Multi-cores (Solid) 24 AWG, Stranded 23 AWG, Multi-cores (Solid) NCB-5EUBLUR1-1, NCB- NCB-C6UGRYR1-1, NCB- SKU Description NCB-5EUBLUR-305 NCB-C6UGRYR-305 5EUBLUR1-2, NCB-5EUBLUR1-3 C6UGRYR1-2, NCB-C6UGRYR1-3

Conductor Metal Bare Copper Color Code Blue/285C Blue/288C Cool Gray/5C Cool Gray/10C Jacket Hardness 55P (84A ± 3A, Shore) Length Type 1 m / 2 m / 3 m 305 m +2 m 1 m / 2 m / 3 m 305 m + 2 m Heat Resistance 60 oC min (temperature limited) Flame Property VW-1 (UL); FT-1 (CSA)

Modular Connector RJ-45 8P Connector/ Plug Contacts Gold plated: 30U” Contact Blade Phosphor Bronze Temperature Range -10 ~ 80 oC Dielectric Withstanding 500 V AC Voltage Insulation Resistance 35M ohm (max.) Durability 750 matching cycles Cable-to-Plug Tensile 20 lbs (89N) (min.) Strength UL Applications 250 V AC, 2A (max.)

UL Listed, ETL Verified, RoHS Certifications √ Compliant

D-Link Corporation No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2010 D-Link Corporation. All rights reserved. Release 01 (May 2010)