DOCSLIB.ORG

Public Auction

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Public Auction 1 OF 5 New as 1 OF 7 New as 2010 2012 TION (5) CATERPILLAR, KOMATSU & KUBOTA Excavators, New as 2010 (7) KUBOTA, TEREX, INTERNATIONAL, CATERPILLAR & Other Track & Wheel Loaders Family Retiring After 75 Successful Years 1 OF 5 MIKE DELUCIO & SON, INC. 3436 Chester Blvd. in Richmond, Indiana 47374 FRIDAY, DECEMBER 11TH STARTING AT 10AM Inspection: Day prior to auction from 9AM - 4PM PUBLIC AUC Low Hours, Low Miles, Always Under Roof (5) CASE, FORD & NEW HOLLAND Backhoes 3 OF 13 1 OF 2 (13) CATERPILLAR, CASE, INTERNATIONAL & JOHN DEERE Dozers (2) MACK CH613 & R688ST Truck Tractors 2004 1 OF 5 1 OF 9 2004 MACK Granite T/A Roll Off Truck (5) BOMAG, CATERPILLAR, RAYCO & Other Compactors 1 OF 10 1 OF 9 New as 2010 (10) LOAD KING, FELLING, TALBERT & Other Trailers (9) GMC, CHEVROLET & FORD Service (9) MACK, PETERBILT, CHEVROLET & Other Dump Trucks & Pickup Trucks, New as 2010 MIKE DELUCIO & SON, INC. / 3436 CHESTER BLVD. IN RICHMOND, INDIANA 47374 2008 3,337 2007 1,065 HOURS HOURS 2008 CATERPILLAR 320D LRR Acert C6.4 Excavator 2007 KOMATSU PC138USLC-E0 Excavator CATERPILLAR M312 Wheel Excavator 2005 CATERPILLAR D8N Dozer 2005 CATERPILLAR D7R Series II Dozer 2003 CATERPILLAR D6N LGP DOZER 2004 2,580 3,361 HOURS HOURS 2004 CATERPILLAR D6RXL Series II Dozer 2002 CATERPILLAR D6MXL Dozer CATERPILLAR D6MXL Dozer 2011 832 2012 997 HOURS HOURS 2011 KUBOTA SVL75 Compact Track Loader 2012 TEREX PT-80 Compact Track Loader INTERNATIONAL DRESSER 540 Wheel Loader Low as 3,225 EXCAVATORS 4,175 HOURS 2008 CAT 320D LRR Acert C6.4, 9’-6” Stick, Hyd. Thumb, 31-1/2” Triple Grouser Track, CAT Quick Release, 3,337 HOURS Hours 2007 KOMATSU PC138USLC-E0, 8’-6” Stick, 23.5” Triple Grouser Track, HELAC Hyd. Bucket Swivel, 48” Sand/Gravel Bucket, 1,065 Hours CAT M312 Wheel Excavator, 77” Stick, 66” Bucket, 98” Float Blade, Heat 2010 KUBOTA KX161-3SS Mini, 16” Rubber Tracks, 70” Stick, 30” Bucket, Hyd. Thumb, Swing Boom, 77” Float Angle Blade, ROPS Canopy, 904 Hours 1986 KUBOTA KH 25 Mini, 9” Rubber Tracks, 24” Stick, 11” Bucket, Swing Boom, 36” Float Blade, ROPS Canopy (2) FORD/NEW HOLLAND 555E 4x4 Backhoes FORD 555D 4x4 Backhoe 2 FRIDAY, DECEMBER 11TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM 1,505 2,546 HOURS HOURS BOMAG BW172PD 66” Single Sheep’s Foot Drum Compactor CATERPILLAR CS-433C 66” Single Smooth RAYGO 66” Single Smooth Drum Compactor Drum Compactor 1 OF 3 (3) INTERNATIONAL 412B Motor Scrapers DRESSER 870 Motor Grader 2001 MACK CH613 T/A Truck Tractor 2000 CHEVROLET C6500 S/A Dump Truck MACK RD690S Tri-Axle Dump Truck MACK R688ST Truck Tractor MACK RD688S Tri-Axle Dump Truck KENWORTH T800 Slinger Truck PETERBILT 357 Dump Truck Heat, Laser Alignment, 6,492 Hours 1996 SAMSUNG SL180-2 Wheel Loader, DOZERS 1999 CAT D5M LGP, 30” Tracks, 130” LOADERS 120” Bucket, Enclosed, 5,157 Hours 1989 CAT D8N, S/N 91C03361, 28” Tracks, 6-Way Blade, Differential Steering, En- 2011 KUBOTA SVL75 Compact Track MELROE 643 Bobcat Skid Steer, Rubber 154” Blade, Differential Steering, Enclosed, closed, Air/Heat, Spectra Precision Laser, Loader, 15” Rubber Tracks, Differential Tires, 1,848 Hours Heat, 16,394 Hours 4,863 Hours Steering, Enclosed, 84” Grapple Bucket, 72” 2005 CAT D7R Series II, 26” Tracks, 145” 1998 JOHN DEERE 650G Series IV Long Bucket, 832 Hours BACKHOES Blade, Differential Steering, Enclosed, Air/ Track, 18” Tracks, 105” 6-Way Blade, 2012 TEREX PT-80 Compact Track 1997 CASE 580 Super L 4x4, Extend-A- Heat, 10,685 Hours ROPS Canopy, 3,453 Hours Loader, 18” Rubber Tracks, Posi-Track, Dif- 2003 CAT D6N LGP, 34” Tracks, 159” 2002 CASE 550H Long Track, 16” Tracks, ferential Steering, Enclosed, 260 Hours Hoe, 4-Speed Automatic, 82”/36” Buckets, 6-Way Blade, Differential Steering, ROPS 96” 6-Way Blade, ROPS Canopy, 2,860 INTERNATIONAL DRESSER 540 Wheel Enclosed, Heat, 4,925 Hours Enclosure, Air/Heat, 10,492 Hours Hours Loader, 110” Bucket, Enclosed, 997 Hours (2) FORD/NEW HOLLAND 555E 4x4, 2004 CAT D6RXL Series II, 22” Tracks, 1990 INTERNATIONAL DRESSER TD20G, 1987 CATERPILLAR 963 Track Loader, 88”/24” Buckets, Enclosed, Heat, 4,328 124” Blade, Differential Steering, ROPS 26” Tracks, 137” Blade, ROPS Canopy, 728 22” Tracks, 98” Bucket, ROPS Enclosure, Hours & 4,175 Hours Enclosure, Air/Heat, 2,580 Hours Hours 6,732 Hours FORD 555D 4x4, 88”/36” Buckets, En- 2002 CAT D6MXL, 24” Tracks, 128” 6-Way (2) INTERNATIONAL DRESSER TD15E, 1983 CATERPILLAR 953 Track Loader, closed, Heat, 3,225 Hours Blade, Differential Steering, ROPS Canopy, 132” Blade, 1990-24” Tracks, 5,344 Hours • 20” Tracks, 96” Bucket, Rear 3-Finger Rip- NEW HOLLAND LV80 4x4 Tractor/Loader, 3,361 Hours 1989-20” Tracks, 1,756 Hours per, ROPS Canopy, 856 Hours Forks, LAND PRIDE 84” Box Scraper, 1997 CAT D6MXL, 24” Tracks, 128” 6-Way MASSEY FERGUSON 200, 14” Tracks, 80” ROPS Canopy, 2,641 Hours Blade, Differential Steering, Enclosed, Air/ 6-Way Blade 3 MIKE DELUCIO & SON, INC. / 3436 CHESTER BLVD. IN RICHMOND, INDIANA 47374 INTERNATIONAL 4700 S/A Crane Truck GMC 6500 S/A Crane/Bucket Truck LORAINE 325 15-Ton Moto Crane INTERNATIONAL S1954 Hammer Truck 2004 FORD F550 Roll Off Truck 2004 MACK Granite T/A Roll Off Truck 2004 MACK Granite T/A Roll Off, Diesel, PVMX-1230, WALTCO Lift Gate COMPACTORS DUMP TRUCKS Automatic, 202,823 Miles 4-Axle Flatbed Trailer, 48” x 12’ Diesel BOMAG 66” Single Sheep’s Foot Drum, 2000 CHEVROLET C6500 S/A, Gas, 1995 MACK RD688S Tri-Axle Roll Off, Storage Tank & Pump Model BW172PDB, 72” Float Blade, 5-Speed, Ox Body 10’/8-10 Yard Dump MACK E7-350 Diesel, 140,074 Miles 1991 KENTUCKY T/A Moving Van Trailer, Articulated, ROPS Canopy Body, Cab Shield, 133,932 Miles (2) 1994 INTERNATIONAL 4700 Roll Off, Side Doors 1999 CAT 66” Single Smooth Drum, 1998 MACK RD690S Tri-Axle, MACK E6- 4X2, Diesel, Automatic (1-Repair/Parts) Model CS-433C, ROPS Canopy, Vibratory, 300 Diesel, 5-Speed, 16’/18-Yard Dump VACUUM Articulated, 1,505 Hours Body, Cab Shield, 88,452 Miles SERVICE & RAYGO 66” Single Smooth Drum, 1997 PETERBILT 357, CAT 3306 300-HP MACHINE Model Rascal, ROPS Canopy, Articulated, Engine, Rockwell RT40145, 9-Speed, PICKUP TRUCKS GREEN MACHINE VT/800 HD VaXcava- 2,546 Hours Quad Axle w/(2) Lift Axles, 402, 243 Miles 2005 GMC C4500 S/A Service, Gas, tor Vacuum System, Trailer Mounted, TAMPO 60” Single Sheep’s Foot Drum, Showing Automatic, 11’ Service Truck Body, Titan Pintle Hook, 585 Hours Model RP16D, ROPS Canopy, Articulated, 1995 MACK RD688S Tri-Axle, MACK E7- Gas Compressor, 22,223 Miles 1,692 Hours 350 Diesel, 8-Speed, 16’/18-Yard Dump 2005 CHEVROLET C3500 Service, SIMESA Series 72” Smooth Drum, Pull Body, Cab Shield, 162,136 Miles Gas, Automatic, 9’ Service Truck Body, BOOM LIFTS Type, Model RVT-200 1995 MACK RD688S Tri-Axle, MACK Headache Rack, Off-Road Diesel Tank, 2004 JLG 860SJ SkyPower Telescopic, 60” & 48” Double Sheep’s Foot Drum, E7-350 Diesel, 8-Speed, Air, 16’/18-Yard 29,360 Miles 86’ Platform Height, 75’ Horiz. Reach Pull Type Dump Body, Cab Shield, 222,192 Miles 2004 CHEVROLET C4500 S/A Service 2008 JLG 660SJ SkyPower Telescopic, 1993 KENWORTH T800B, Cummins N14 2000 GMC K2500 S/A Service, Gas, 66’ Platform Height, 56.75’ Horiz.Reach MOTOR 330-HP Engine, Eaton Fuller 8LL, Quad Automatic, 8’ Service Truck Body, 49,731 2004 JLG 600S SkyPower Telescopic, Axle w/(2) Lift Axles, R/S Aluminum Dump Miles 60’ Platform Height, 49.47’ Horiz. Reach SCRAPERS & Bed w/Tarp, 485,903 Miles Showing 1989 CHEVROLET Cheyenne Service, 1988 KENWORTH T800 Slinger Truck, Diesel, Automatic, 9’ Service Truck Body, MISCELLANEOUS GRADER Cummins NTC 350 Engine, Eaton 8LL, 61,885 Miles, MILLER Bobcat 250 Gas DATSUN 8,000-lb. (Est) Forklift, Gas, (3) INTERNATIONAL 412B Motor Scrap- Quad Axle w/(2) Lift Axles Welder/Generator, (Only 60 Hours), Dual Front, Cushion Tires, ROPS ers, 13.1-Ton/11-Yard Scraper 1987 CHEVROLET 700 S/A, Gas, HONDA 11.0 Gas Compressor GARDNER DENVER 600 Rotary Screw INTERNATIONAL E200 Pay Scraper Mo- 5-Speed, HEIL 10’/5-Yard Dump Body, 2011 GMC SIERRA 1500 Extended Cab Air Compressor, Detroit Diesel, Trailer tor Scraper, 11.1-Ton/9.5-Yard Scraper 44,234 Miles Pickup, 4X4, Gas, Automatic, Toolbox, Mounted DRESSER 870 Motor Grader, Diesel, 12’ 1984 INTERNATIONAL 1950 S/A, Diesel, 22,638 Miles GARDNER DENVER W26416 Air Com- Blade, 6-Speed Automatic, Enclosed 5-Speed, 10’/5-Yard Dump Body, 56,367 2010 CHEVROLET 2500HD Utility Bed pressor, Deere Diesel, Trailer Mounted Miles Pickup INGERSOLL RAND P185WJD Air Com- ATTACHMENTS 2003 CHEVROLET K2500 HD Pickup, pressor, Deere Diesel CRANE TRUCKS TITAN INDUSTRIAL Gas Generators Concrete/Rebar Shear, CAT 330 Excava- 4X4, Gas, Automatic, CURTIS Snow Plow 1998 INTERNATIONAL 4700 S/A Crane & Controls (6) GORMAN RUPP 6” Gas Pumps tor Attachment MILLER AEAD-200LE 225-AMP Stick (4) Hyd. Hammers for Excavator • (38) Truck, T444E Diesel, 5-Speed, 18’ Wood 2003 FORD F350 S/A Pickup Deck, 28,592 Miles, TEREX/R-O Dino Welder 9”-50” Excavator/Backhoe Buckets • 96” ASSOCIATED Starting Cart, Model GS2 & 75” Skid Steer Buckets • (2) 7’ Skid 1500 Crane, Model TC2863, 3-Sections TRAILERS 63’ Crane w/24’ Jib, 30,000-lb. Capacity Kar Start Steer Grapple Buckets • Backhoe Buckets 1986 LOAD KING 50-Ton Tri-Axle RGN, 20’ & 12’ Shipping Containers & Forks • (2) Truck-Attaching Asphalt & GMC 6500 S/A Crane/Bucket Truck, Gas Pony Motor, 24’ x 9’ Well, 13’ Rear Gas, 5-Speed, 45,039 Miles, R-O 12,500- (13) Swing Door & Bed Type Trash Gravel Spreaders • BOBCAT 72” Sweeper Shelf, Outriggers, Air Suspension Containers • BOBCAT Drill • McMILLEN X1975 Skid lb.
Load more

Recommended publications
  • Caterpillar (CAT) Excavators, Dozers, & Motor Graders Machine.Market
    D6R ® Series II Track-Type Tractor Cat® Engine C9 Operating Weights Standard Standard 18 300 kg Gross Power 141 kW/189 hp XL 18 700 kg Flywheel Power 123 kW/165 hp XW 19 900 kg XL/XW/LGP LGP 20 500 kg Gross Power 157 kW/210 hp Blade Capacity Range 3.18 m3 - 5.62 m3 Flywheel Power 138 kW/185 hp Courtesy of Machine.Market D6R Series II Track-Type Tractor The D6R Series II power, response and control deliver more production at lower cost-per-yard. Engine Advanced Modular Cooling System Drive Train ✔ The rugged, easy-to-service C9 engine (AMOCS) ✔ Matched with the electronic engine features an electronically controlled, AMOCS utilizes an exclusive two pass control, the Caterpillar® electronic direct injection fuel system for cooling system and increased cooling transmission control allows the power improved fuel efficiency and reduced surface area to provide significantly train to work more efficiently. pg. 6 emissions. The C9 meets EPA, EU more cooling efficiency than and JMOC emissions regulations. pg. 4 conventional cooling systems. ✔ Air-to-air aftercooler improves engine performance and reduces emissions. pg. 5 Structure Undercarriage Mainframe is heavy, strong and durable. With the elevated sprocket design, the Strong case, steel castings and final drives are located above the work reinforced frame rails provide durable area, isolating them from ground support to the undercarriage, elevated induced impacts. The different final drives and other integral frame undercarriage configurations allow you components. pg. 7 to match the machine to the application. pg. 12 Engineered for demanding work, the D6R Series II is designed to be productive in a variety of applications.
    [Show full text]
  • Specifications
    Specifications Model Unit T80 (Narrow) T80 (Standard) T80COMFORT CAB EDITION Engine Net Hp @2600 RPM* HP (kw) 78 (58) Horsepower PTO HP @2600 RPM* HP (kw) 66 (50) Type 4 - Cylinder Turbocharged Diesel Engine Engine Model 4TNV98T Displacement cu.in. (L) 203 (3.3) Fuel Capacity US gal. (L) 38 (146) Type Collar Shift with Hydraulic Shuttle Transmission Speed 12F /12R Max. Travel Speed mph (km/h) 10 (16) Brakes Wet Multi-Disk Steering System FDS (Forced Differential Steering) Type Fully Independent Power Takeoff Speed RPM 540 Type Open-Center Hydraulic System Hydraulic Implement Pump GPM (Lpm) 12.6 (48) Category 2/1 Rear 3-Point Hitch Lift Capacity @ OECD Frame lb. (kg) 4400 (2000) Type Rubber (with embedded metal core and wires) Tracks Track Width 11 (280) 18 (450) Overall Length in. (mm) 146 (3715) Overall Width in. (mm) 52 (1310) 65 (1650) Dimensions Overall Height in. (mm) 97 (2460) 96.5 (2445) Tractor Weight lb. (kg) 7055 (3200) 7407 (3360) Ground Pressure* psi (MPa) 4.9 (0.034) 3.2 (0.022) * Manufacturer’s Estimate Attachments in. 97 Weight Set - 66lbs x 8pcs 145 in. 65 in. 52 in. YANMAR AGRICULTURAL EQUIPMENT CO., LTD. HEAD OFFICE 1-32, Chayamachi, Kita-ku, Osaka 530-8321 JAPAN YANMAR AMERICA CORPORATION 101 INTERNATIONAL PKWY, ADAIRSVILLE, GA 30103 TEL: 770.877.9894 WWW.YANMARTRACTOR.COM The information in this brochure is accurate as of the date of printing and subject to change. All rights reserved by and belong to YANMAR®. Copyright 2014. Get on Track All Weather, Day or Night Driver’s Cab Inside the T80-CCE’s heated and air-conditioned Through its low compaction, outstanding mobility, easy operation, simple maintenance and lots of field-oriented driver’s station a floating deck system of anti-vibration rubber body mounts has been features, Yanmar’s T80 Comfort Cab Edition (CCE) rubber-track crawler brings new and innovative benefits incorporated to reduce both vibration and noise factors for the operator.
    [Show full text]
  • The Project Design of the Tracked Vehicle Hydraulic Mechanical Differential Steering Zhaozhong Yang
    2nd International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII 2016) The Project Design of the Tracked Vehicle Hydraulic Mechanical Differential Steering Zhaozhong Yang1, a, Liwei Wang2, b, Caoyang Shi3, c 1,2troops 63981, Wuhan, 430311, China 3A Agent's Room, Zhangjiakou, 075041, China aemail: [email protected],bemail: [email protected], cemail:[email protected] Keywords: Tracked vehicle; The hydraulic mechanical differential steering; Design Abstract. Based on the principle of hydraulic mechanical stepless transmission is tracked vehicle hydraulic mechanical differential steering system can effectively improve the vehicle's steering can win, is has good prospects for development of a tracked vehicle steering model. Papers on tracked vehicle and its present situation and trend of development of the steering system, analysis of the hydraulic mechanical differential steering system structure, working principle, the vehicle steering lung can and on the basis of the research and application status at home and abroad, puts forward the main content of the steering system research and to solve the problem. In the output shunt transmission and input shunt two basic hydraulic mechanical transmission based on the analysis of the features, according to the requirements of the tracked vehicle steering, identified a new type of hydraulic mechanical differential steering system transmission scheme, this scheme has the advantages of simple structure and increasing the torsional speed down, caterpillar vehicle is suitable for agricultural use. Introduction Tracked vehicles, as a kind of "spread" the road vehicles, its unique travel system to make it a wheeled vehicle has many outstanding advantages: big traction, suitable for heavy duty operation, such as, rake and earthmoving operations; Grounding than the small, the farmland on the compaction, the extent of damage light; Across the ditch the bunds ability, etc.
    [Show full text]
  • Power Steering
    Module-3 POWER STEERING Introduction: The steering system of a vehicle is one of its key components. In a hydraulic power steering system, the effort required to turn the wheel of a vehicle by the rotation of the steering wheel is reduced with the help of hydraulic assistance. Power steering is an advanced form of steering system in which the overall effort required by the driver is reduced through an increase in the force applied on the steering wheel with the help of either electric or hydraulic assistance. In a normal steering mechanism, in comparison to the power steering mechanism, there is no hydraulic or electrical assistance to reduce the effort of turning the steering wheel. The rest of the mechanical components and their working remain the same between the two steering systems, minus the parts which are exclusive to a power steering system. Three main types of power steering: • Hydraulic Power Steering: In a hydraulic power steering system, the effort required to turn the wheel of a vehicle by the rotation of the steering wheel is reduced with the help of hydraulic assistance. When the steering wheel is turned, a hydraulic pump, which draws power from the vehicle’s engine, starts to pump hydraulic fluid through the system’s lines. This high-pressure hydraulic fluid then enters a cylinder and exerts force on the cylinder piston. This piston then pushes the hydraulic fluid ahead of it through the system’s lines, which in turn exerts pressure on the rack and pinion, coupling arrangement, multiplying the input force several times and resulting in the rotation of the vehicle’s front wheels.
    [Show full text]
  • Advertising Brochure: Oliver Cletrac A
    University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Tractor Test and Power Museum, The Lester F. Nebraska Tractor Tests Larsen January 1949 Advertising Brochure: Oliver Cletrac A Nebraska Tractor Test Lab University of Nebraska-Lincoln, [email protected] Follow this and additional works at: https://digitalcommons.unl.edu/tractormuseumlit Part of the Energy Systems Commons, History of Science, Technology, and Medicine Commons, Other Mechanical Engineering Commons, Physical Sciences and Mathematics Commons, Science and Mathematics Education Commons, and the United States History Commons Nebraska Tractor Test Lab, "Advertising Brochure: Oliver Cletrac A" (1949). Nebraska Tractor Tests. 451. https://digitalcommons.unl.edu/tractormuseumlit/451 This Article is brought to you for free and open access by the Tractor Test and Power Museum, The Lester F. Larsen at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Nebraska Tractor Tests by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. OLIVER "Cletracll GASOLINE OR DIESEL POWER CUT COSTS. The Model A SAVE TIME. Developing Oliver "Cletrac" incorporates a better than 80 per cent of its balanced design that eliminates weight in drawbar pull, the Model A Oliver "Cletrac" does dead weight and increases more work in less time. It keeps OLIVER actual capacity. This saves work up to schedule, eliminates fuel, decreases wear and tear overtime and extra crews, saves and so cuts maintenance costs. labor costs and gives you a Yet, the large track area and larger profit. With ground many grousers provide positive pressure of approximately 5 "Cletrac" traction in mud, sand, rock, pounds to the square inch— clay—uphill and down! With less than that of a man walking higher protected clearance and the Model A is always ready Tru-Traction you get your work to go ..
    [Show full text]
  • Modern Battle Tanks
    MODERN! BATTLE k r * m^&-:fl 'tWBH^s £%5»-^ a $ Oft > . — n*- ^*M. S»S Ll^MfiB bjfitai 'Si^. ~i • ^-^HflH Lf. O Q MODERN BATTLE TANKS Edited by Duncan Crow Published by ARCO PUBLISHING COMPANY, INC. New York Published 1978 by Arco Publishing Company, Inc. 219 Park Avenue South, New York, N.Y. 10003 Copyright © 1978 PROFILE PUBLICATIONS LIMITED. Library of Congress Cataloging in Publication Data MODERN BATTLE TANKS 1. Tanks (Military science) I. Crow, Duncan. UG446.5.M55 358'. 18 78-4192 ISBN 0-668-04650-3 pbk All rights reserved Printed in Spain by Heraclio Fournier, S.A. Vitoria Spain Contents PAGE Introduction by Duncan Crow Centurion VI Swiss Pz61 and Pz68 VII Vickers Battle Tank VII Japanese Type 61 and STB VIII Soviet Mediums T44, T54, T55 and T62 by Lt-Col Michael Norman, Royal Tank Regiment T44 2 T54 3 Water Crossing 9 Fighting at Night 10 T55 and T62 ... 12 Variants 12 Tactical Doctrine 15 The M48-M60 Series of Main Battle Tanks by Col Robert J. Icks, AUS (Retired) In Battle 19 M48 Development 22 M48 Description 24 Hybrids 26 The M60 32 The Shillelagh 32 The M60 Series 38 Chieftain and Leopard Main Battle Tanks by Lt-Col Michael Norman, Royal Tank Regiment Development Histories 41 Chieftain (FV4201) 41 Leopard Standard Panzer 52 Chieftain and Leopard Described 60 Later Developments by Duncan Crow ... 78 . S-Tank by R. M. Ogorkiewicz Origins of the Design 79 Preliminary Investigations 80 Component Development 81 Suspension and Steering 83 Armament System 87 Engine Installation 88 Probability of Survival 90 Pre-Production Vehicles 90 Production Model 96 Tactical performance .
    [Show full text]
  • TURKEY One of the 10 Countries That Has the Capability to Construct Warship in the World
    CONTENTS ABOUT US 4 1st MAIN MAINTENANCE FACTORY DIRECTORATE 5 2ND MAIN MAINTENANCE FACTORY DIRECTORATE 23 4TH MAIN MAINTENANCE FACTORY DIRECTORATE 44 5TH MAIN MAINTENANCE FACTORY DIRECTORATE 55 6TH MAIN MAINTENANCE FACTORY DIRECTORATE 70 7TH MAIN MAINTENANCE FACTORY DIRECTORATE 83 8TH MAIN MAINTENANCE FACTORY DIRECTORATE 93 ELECTRO-OPTICAL SYSTEMS MAIN MAINTENANCE FACTORY DIRECTORATE 102 MINISTRY OF NATIONAL DEFENCE GENERAL DIRECTORATE OF NAVAL SHIPYARDS 112 1st AIR MAINTENANCE FACTORY DIRECTORATE 130 2ND AIR MAINTENANCE FACTORY DIRECTORATE 147 3RD AIR MAINTENANCE FACTORY DIRECTORATE 174 Army Sewing & Tailoring WORKShops Directorate 191 NAVY Sewing & Tailoring WORKShops Directorate 196 AIR Sewing & Tailoring WORKShops Directorate 201 MOD PHARMACEUTICAL PRODUCTION PLANT 203 ABOUT US ASFAT Inc., a fully government owned entity, was established on 12 January 2018 under the Ministry of National Defence in accordance with the supplementary article #12 enacted for Act#1325. ASFAT Inc. utilizes over 30 years of experience in manufacturing, modernization, repair, maintenance and sustainment of 27 military factories and 3 naval shipyards with the qualified and expert labour force. While performing its functions, ASFAT Inc. aims to improve operational excellence by developing facilities, capabilities and capacities of military factories and shipyards. Being entitled to sign “Government-to-Government Agreements”, ASFAT Inc. plays an effective role to ease export processes of defence industry products. It offers and provides innovative solutions to friendly and allied nations in design, manufacture, maintenance, sustainment and training areas with a solution partner approach, via aiming the launching of lifecycle management fundamentals with the synergy created by public-private partnership. Thanks to the dynamism brought by its efficient organization and competent staff with international experience, ASFAT Inc.
    [Show full text]
  • A Hybrid Vehicle for Aerial and Terrestrial Locomotion
    A HYBRID VEHICLE FOR AERIAL AND TERRESTRIAL LOCOMOTION by Richard J. Bachmann Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy Dissertation Advisor: Dr. Roger D. Quinn Department of Mechanical Engineering Case Western Reserve University May, 2008 CASE WESTERN RESERVE UNIVERSITY SCHOOL OF GRADUATE STUDIES We hereby approve the thesis/dissertation of _____________________________________________________ candidate for the ______________________degree *. (signed)_______________________________________________ (chair of the committee) ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ (date) _______________________ *We also certify that written approval has been obtained for any proprietary material contained therein. Table of Contents Section Page Chapter 1 Introduction..................................................................................................1 1.1 Motivation.............................................................................................................2 1.1.1 Chemical or Biological Weapon Source Localization....................................2 1.1.2 Ad hoc Sensor Network Deployment .............................................................2 1.1.3 Search and Rescue..........................................................................................3 1.1.4 Hazardous
    [Show full text]
  • The Centurion Tank (Images of War)
    A Centurion armoured recovery vehicle (ARV, FV4006) photographed during the liberation of Kuwait in 1990/91. The registration number (00ZR48) indicates that this vehicle was converted from a Mk 1 or Mk 2 Centurion gun tank dating from the immediate post-war years. Note the additional composite armour applied to the sides of the vehicle in the form of panels. (Tank Museum) First published in Great Britain in 2012 by PEN & SWORD MILITARY an imprint of Pen & Sword Books ltd, 47 Church Street, Barnsley, South yorkshire S70 2AS Copyright © Pat ware, 2012 ISBN 978 1 78159 011 9 eISBN 978 1 78337 828 9 A CIP record for this book is available from the British library. All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system, without permission from the Publisher in writing. Typeset by CHIC GRAPHICS Printed and bound by CPI Group (UK) ltd, Croydon, CR0 4YY Pen & Sword Books Ltd incorporates the Imprints of Pen & Sword Aviation, Pen & Sword Family History, Pen & Sword Maritime, Pen & Sword Military, Pen & Sword discovery, wharncliffe local History, wharncliffe True Crime, wharncliffe Transport, Pen & Sword Select, Pen & Sword Military Classics, leo Cooper, The Praetorian Press, Remember when, Seaforth Publishing and Frontline Publishing. For a complete list of Pen & Sword titles please contact Pen & Sword Books limited 47 Church Street, Barnsley, South yorkshire, S70 2AS, england E-mail: [email protected]
    [Show full text]
  • Performance on Steering Power Ratio of Tracked Vehicles Influenced by Soil Parameters
    MATEC Web of Conferences 31, 00220 (2015) DOI: 10.1051/matecconf/20153100220 C Owned by the authors, published by EDP Sciences, 2015 Performance on steering power ratio of tracked vehicles influenced by soil parameters Yuan Chi a, Rongrong Zhang, Hongtao Wang and Dandan Shi Northeast Agricultural University Engineering School in Harbin, China Abstract. In order to study tracked vehicle adopting different steering mechanism, we use steering power ratio to evaluate its performance. The influencing factors of steering power ratio have been theoretically studied. And we designed the experimental prototype to test. We find that steering power ratio is related to vehicle parameters, resistance coefficient, turning radius, skid ratio, slip ratio and steering coefficient not only, but also it is related to soil parameters (including soil cohesion, internal friction angle of soil and shear modulus of soil). On the condition that vehicle parameters and resistance coefficient are determined, the soil shear tests were carried out, which acquired that the average moisture content of soil is 16.85%ˈsoil cohesion is 14.071 Kpa, internal friction angle of soil is 17.93 , and shear modulus of soil is 0.00027 m. Through being researched, steering power ratio is related to turning radius, skid ratio and slip ratio, which has the important significance on the study of steering power ratio. 1 Introduction and slip impact on steering power ratio is very few. According to the theory of soil mechanics, the paper Tracked vehicle can be steered in small plot by makes a theoretical analysis on the influencing factors of differential steering, further more, the turning radius can steering power ratio, and on the basis of differential be zero.
    [Show full text]
  • A Power Coupling System for Electric Tracked Vehicles During High-Speed Steering with Optimization-Based Torque Distribution Control
    energies Article A Power Coupling System for Electric Tracked Vehicles during High-Speed Steering with Optimization-Based Torque Distribution Control Hong Huang 1,2, Li Zhai 1,2,* ID and Zeda Wang 1,2 1 National Engineering Laboratory for Electric Vehicles, Beijing Institute of Technology, Beijing 100081, China; [email protected] (H.H.); [email protected] (Z.W.) 2 Co-Innovation Center of Electric Vehicles in Beijing, Beijing Institute of Technology, Beijing 100081, China * Correspondence: [email protected]; Tel.: +86-010-6891-5202 Received: 19 April 2018; Accepted: 11 June 2018; Published: 13 June 2018 Abstract: It is significant to improve the steering maneuverability of dual-motor drive tracked vehicles (2MDTVs), which have wide applications in the tracked vehicle industry. In this paper, we focus on the problem of insufficient propulsion motor power during high-speed steering. Some correction formulas are introduced to improve the accuracy of the mathematical model. A steering coupling system and an optimization-based torque distribution control strategy is adopted to improve the lateral stability of the vehicle. The 2MDTV model and the proposed control strategy are built in the multi-body software RecurDyn and the control software Matlab/Simulink, respectively. According to the real-time steering simulation by the hardware-in-the-loop (HIL) method, the 2MDTV with the coupling device outputs more power during high-speed steering. The results show the speed during steering is quite high though, the stability of the vehicle can be achieved due to using the torque distribution strategy, and the steering maneuverability of the vehicle is also improved.
    [Show full text]
  • Caterpillar (CAT) Excavators, Dozers, & Motor Graders Machine.Market
    D8R ® Series II Track-Type Tractor Engine 3406E Gross Power 252 kW/338 hp Flywheel Power 231 kW 310 hp Weights Operating Weight 37 875 kg Shipping Weight 29 575 kg Courtesy of Machine.Market D8R Series II Track-Type Tractor The D8R Series II combines power and efficiency with advanced technology for outstanding production at lower cost-per-yard. Engine Torque Divider Operator Station ✔✔The rugged, easy-to-service 3406E The single-stage torque converter with ✔ The D8R II operator station is designed engine features the electronically output torque divider provides greater for comfort and ease of operation. controlled, direct injection fuel system driveline efficiency and higher torque pg. 6 for lower combustion sound and multiplication. pg. 5 reduced emissions. The 3406E meets current EPA, EU, and JMOC emissions regulations. pg. 4 Advanced Modular Cooling System Work Tools/Attachments (AMOCS) ✔ A variety of bulldozer blades, rippers AMOCS utilizes an exclusive two pass and other options allows you to cooling system and increased cooling customize the D8R II to match your surface area to provide significantly specific application. The heavy box- more cooling capacity than section blade design also helps resist conventional systems. pg. 11 twisting and cracking. pg. 12 The D8R Series II durable construction is made for tough working conditions. It keeps material moving with the reliability and low operating costs you expect from Cat® tractors. 2 Courtesy of Machine.Market Undercarriage Structure Transmission ✔✔Elevated sprockets move the final Mainframe is heavy, strong and durable. Caterpillar ® designed and drives above the work area, isolating Full box sections, steel castings and manufactured differential steering them from ground impacts.
    [Show full text]