G. Reza Vakili-Nezhaad
Total Page:16
File Type:pdf, Size:1020Kb
G. Reza Vakili-Nezhaad Current address: Petroleum and Chemical Engineering Department College of Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khod 123, Musca, Sultanate of Oman. Telephone: +968 2414 2587 (Office) +968 2414 1354 (Fax) Email: [email protected] Present Position: Professor, Petroleum and Chemical Engineering Department Area of Specialization: Applied Thermodynamics, Nanotechnology Educational and Employment Information a) Education 1. Ph.D. in Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran (1999). 2. M.Sc. in Chemical Engineering, University of Tehran, Tehran, Iran (1993). 3. B.Sc. in Chemical Engineering, Sharif University of Technology, Tehran, Iran (1989). b) Employment History . November 2018–Present: Professor- Department of Petroleum and Chemical Engineering, Sultan Qaboos University, Oman. September 2008–October 2018: Associate Professor- Department of Petroleum and Chemical Engineering, Sultan Qaboos University, Oman. June 2008–September 2008: Associate Professor-Chemical Engineering Department, University of Kashan, Kashan, Iran. February 2008-June 2008: Visiting Consultant (Associate Professor), Department of Petroleum and Chemical Engineering, College of Engineering, Sultan Qaboos University, Muscat, Oman. May 2007-February 2008: Associate Professor, Chemical Engineering Department, University of Kashan, Kashan, Iran. April 2005-May 2007: Director & Associate Professor, Institute for Nano-Science & Nanotechnology, University of Kashan, Kashan, Iran. December 2004-April 2005: Associate Professor, Chemical Engineering Department, University of Kashan, Kashan, Iran. Page | 1 . April 2004-December 2004: Visiting Scholar & Assistant Professor, Department of Chemical Engineering, University of Saskatchewan, Saskatoon, Canada. February 2003-April 2004: Deputy Dean & Assistant Professor, Faculty of Engineering, University of Kashan, Kashan, Iran. March 2001-April 2003: Head of Department & Assistant Professor, Chemical Engineering Department, University of Kashan, Kashan, Iran. September 2000-March 2001: Assistant Professor, Chemical Engineering Department, University of Kashan, Kashan, Iran. September 1999-September 2000: Acting Head of Department & Assistant Professor, Department of Chemical Engineering, Faculty of Engineering (Pardis 3), University of Tehran, Guilan, Iran. September 1995-September 1999: Lecturer, Department of Chemical Engineering, Faculty of Engineering (Pardis #3), University of Tehran, Guilan, Iran. December 1993-September 1995: Senior Researcher, Research Institute of Petroleum Industry, Tehran, Iran. Honors, Awards and Recognition . Distinguished Teacher Nominee, Petroleum and Chemical Engineering Department, Sultan Qaboos University, 2015. Supervision of Undergraduate Students Winning Gold Prize, Seoul International Invention Fair, Korean Invention Promotion Association, South Korea, December 2014. Research Project: Gases Separation Using Omani Natural Material. ABET Recognition, Recognized by the Vice Chancellor of SQU for the efforts and contribution in the success of engineering programs accreditation by ABET, 2010. PCED Best Researcher Nominee, Petroleum and Chemical Engineering Department, Sultan Qaboos University, 2010 & 2011. Distinguished Researcher, University of Kashan, Kashan, Iran, 2003. Best Researcher, Faculty of Engineering, University of Kashan, Kashan, Iran, 2002. Teaching I. Postgraduate Courses Taught: 1. Advanced Mass Transfer 2. Advanced Chemical Engineering Thermodynamics 3. Advanced Transport Phenomena 4. Thermo-physical Properties of Oils and Gases 5. Advanced Engineering Statistics 6. Advanced Engineering Mathematics 7. Thermodynamics of Small Systems 8. Statistical Thermodynamics 9. Advanced Numerical Methods 10. Instrumentation & Control in Chemical Industries Page | 2 II. Undergraduate Courses Taught 1. Special Topics II 2. Process Heat Transfer 3. Unit Operations II 4. Chemical Engineering Thermodynamics 5. Chemical Reaction Engineering 6. Heat Transfer 7. Natural Gas Processing 8. Applied Physical Chemistry 9. Chemical Process Industries 10. Numerical Methods 11. Desalination 12. Probability and Statistics 13. Final Year Project I 14. Final Year Project II 15. Chemical Engineering Thermodynamics I 16. Unit Operations of Chemical Engineering I 17. Ordinary Differential Equations 18. Applied Mathematics in Chemical Engineering III. Curriculum Development I have developed/improved and taught the following postgraduate courses: 1. Advanced Mass Transfer (Developed) 2. Thermo-physical Properties of Oils and Gases (Developed) 3. Advanced Chemical Engineering Thermodynamics (Developed) 4. Advanced Transport Phenomena (Developed) 5. Advanced Engineering Statistics (Improved) 6. Advanced Engineering Mathematics (Improved) 7. Thermodynamics of Small Systems (Developed) 8. Statistical Thermodynamics 9. Advanced Numerical Methods IV. Student Advising . Academic advisor at SQU for chemical engineering students (2008 and 2013 Cohorts with the average number of 40 students). I have been Academic advisor of many Chemical Engineering students at the University of Kashan, Iran during the years 2000-2008 (with the average number of 40 students). Page | 3 . Academic advisor for chemical engineering students (cohort 1996) from 1999- 2000, Department of Chemical Engineering, Faculty of Engineering (Pardis 3), University of Tehran, Guilan, Iran (Average number of 30 students). V. Postdoctoral Fellows Supervision 1. Dr. Khalid Al-Hinai, Development of a Computer Program for Calculation of the CO2–Oil Minimum Miscibility Pressure, Engineering Research Lab, Sultan Qaboos University, November 2014-September 2015. 2. Dr. Amir Hossein Haji, Investigating the Effectiveness of Implementing a New Design for Crude Oil Degasser Project, Engineering Research Lab, Sultan Qaboos University, June 2012-September 2013. VI. PhD Theses Supervision 1. Khalid Al-Hinai, CO2–Oil Minimum Miscibility Pressure Estimation for the Omani Oils, Status: Graduated in October 2014. Supervisors: G. R. Vakili- Nezhaad, Ali Al-Bemani. 2. Zeinab Al-Ani, Optimization of Selected Chemical Processes using Evolutionary Approach, 2016-Now. Supervisors: Ashish Gujarathi, G. Reza Vakili-Nezhaad, Dr. Talal Al-Wahaibi. 3. Amal Al-Saadi, Diffusion of Ions and Solutes in Nanofiltration Systems, 2017-Now. Hasan Abdullatif, G. Reza Vakili-Nezhaad, Ashish Gujarathi. VII. Master Theses Supervision/Co-Supervision 1. Ohoud Al Ghafri, Experimental and Theoretical Studies on viscosity of nanofluids. Completed February 2019. Supervisors: Majid Al-Wadhahi, G. Reza Vakili-Nezhaad. 2. Mohammed Thafseer, Evolutionary Optimization of Chemical Processes using Advanced Engineering Software. Completed January 2019. Supervisors: G. Reza Vakili-Nezhaad, Ashish Gujarathi. 3. Buthaina Al Rajhi, Simulation, Retrofitting and Optimization Aspects in Chemical Processes. Completed January 2019. Supervisors: Ashish Gujarathi, G. Reza Vakili-Nezhaad. 4. Saud Al-Balushi, Optimization of Centrifugal Compression System. Completed January 2019. Supervisors: Hasan Abdullatif, G. Reza Vakili- Nezhaad, Ashish Gujarathi. Page | 4 5. Ahmed Suleiman, An experimental and modelling approach to estimate MMP. Completed September 2018. Supervisors: Ali Al-Bemani, G. Reza Vakili-Nezhaad. 6. Mahmood Fani, Optimization of Smart Water Shock Flooding. Completed June 2018. Supervisors: Hamoud Al-Hadrami, Nader Mosavat, G. Reza Vakili-Nezhaad. 7. Monther Al-Manthari, Application of theoretical based combing rules to cubic equations of state for the study of PVT behavior of hydrocarbon mixtures. Completed May 2018. Supervisors: Majid Al-Wadhahi, G. Reza Vakili- Nezhaad. 8. Asma Al-Harthi, Modeling, simulation and optimization of lactic acid production processes. Completed February 2018. Supervisors: Ashish Gujarathi, G. Reza Vakili-Nezhaad. 9. Shamsa Al-Haddabi, Experimental and theoretical investigation of surface tension of organic liquids and their binary and ternary mixtures. Completed January 2018. Supervisors: G. Reza Vakili-Nezhaad, Majid Al-Wadhahi. 10. Ali Vakilinejad, Modeling of Rheological Behavior and Transport Properties of Thermal Nanofluids. Completed September 2017. Supervisors: M. A. Aroon, M. Al Abri, H. Bahmanyar, G. Reza Vakili-Nezhaad. 11. Nasr, Waqar Ahmad, Modeling & Experimental Determination of CO2– Crude Oil Minimum Miscibility Pressure. Completed September 2016. 12. Masoud Ghasemi, Investigation of Computational Methods for Determination of Gas-Oil Minimum Miscibility Pressure. Completed September 2016. Supervisors: C. Ghotbi, G. Reza Vakili-Nezhaad, T. Jafari. 13. Al-Abri, A. A., Modified Equation of State for Improved Oil Density Prediction, completed June 2015. Supervisors: R. Al-Maamari, G. Reza Vakili-Nezhaad, M. Al-Wadhahi. 14. Vatani, M., A Study on properties and application of ionic liquids in extraction of aromatics and genetic algorithm-aided modeling, completed 2012. Supervisors: G. Reza Vakili-Nezhaad, M. Asghari. 15. Al-Khousaibi, A. M., Characterization of Omani Light Oil Using Multiple Wells Fluid PVT Analysis, completed 2011. Supervisors: G. Reza Vakili- Nezhaad, A. A. Al-Hashmi. Page | 5 16. Naderi-Dehkordi, M., Vapor-Liquid Equilibrium Calculations in Nanometric System, completed 2010. Supervisors: G. Reza Vakili-Nezhaad, I. Nemati- Lay. 17. Akbari, Z., Mathematical Modeling and Simulation of Nanofiltration Process, completed 2009. Supervisor: G. Reza Vakili-Nezhaad. 18. Nasrollahi, F., Phase Equilibrium Calculations of the System Ethyl Alcohol and Gasoline Using Continuous