14,30 Beam (M) 4,70 Draft
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Oil Companies International Marine Forum SIRE Programme Harmonised Vessel Particulars Questionnaire V5
Oil Companies International Marine Forum SIRE Programme Harmonised Vessel Particulars Questionnaire v5 GEORGIA M IMO/LR Number 9321196 OCIMF Id: A-100-003-940 13 December 2020 DISCLAIMER OCIMF DOES NOT WARRANT OPERATOR IDENTITY AND IS NOT RESPONSIBLE FOR THE CHOICE OF SHIPS INSPECTED, THE INSPECTORS CHOSEN, THE PERFORMANCE OF THE INSPECTIONS OR THE CONTENT OF THE REPORTS, OPERATOR COMMENTS AND/OR VESSEL PARTICULAR QUESTIONNAIRE RESPONSES DISTRIBUTED UNDER THE REVISED PROGRAMME. OCIMF IS INVOLVED ONLY IN THE RECEIPT, ORGANISATION AND DISTRIBUTION OF THE FOREGOING PROGRAMME OUTPUT. OCIMF DOES NOT REVIEW OR EVALUATE SUCH OUTPUT AND EXPRESSES NO OPINION CONCERNING ITS ACCURACY. WHILE OCIMF MAKES EVERY EFFORT TO ENSURE THAT PROGRAMME OUTPUTS ARE RECEIVED, ORGANISED AND DISTRIBUTED IN ACCORDANCE WITH THE SIRE COMPOSITE GUIDELINES, OCIMF ACCEPTS NO LIABILITY FOR FAILURE TO DO SO. Vessel Particulars Questionnaire for GEORGIA M IMO: 9321196 1 General Information 1 General Information 1.1.1 Date this HVPQ document completed 13 December 2020 1.1.2 Vessel identification 1 Name of ship GEORGIA M 2 LR/IMO number 9321196 3 Company IMO number 5519347 1.1.3 Previous names Name Date of change Last previous FORTUNE VICTORIA 14 June 2017 Second last previous Not Applicable Third last previous Not Applicable Fourth last previous Not Applicable 1.1.4 Flag 1 Flag PANAMA 2 Has the flag been changed? No 3 What was the previous flag? 1.1.5 Port of Registry Panama 1.1.6 Call sign 3EKQ9 1.1.7 Ship contacts 1 INMARSAT number +870773910105 / +302112340534 2 Ship's -
Recommendation for the Application of SOLAS Regulation V/15 No.95
No.95 Recommendation for the Application of SOLAS (Oct 2007) (Corr.1 Regulation V/15 Mar 2009) (Corr.2 Bridge Design, Equipment Arrangement and July 2011) Procedures (BDEAP) Foreword This Recommendation sets forth a set of guidelines for determining compliance with the principles and aims of SOLAS regulation V/15 relating to bridge design, design and arrangement of navigational systems and equipment and bridge procedures when applying the requirements of SOLAS regulations V/19, 22, 24, 25, 27 and 28 at the time of delivery of the newbuilding. The development of this Recommendation has been based on the international regulatory regime and IMO instruments and standards already accepted and referred to by IMO. The platform for the Recommendation is: • the aims specified in SOLAS regulation V/15 for application of SOLAS regulations V/19, 22, 24, 25, 27 and 28 • the content of SOLAS regulations V/19, 22, 24, 25, 27, 28 • applicable parts of MSC/Circ.982, “Guidelines on ergonomic criteria for bridge equipment and layout” • applicable parts of IMO resolutions and performance standards referred to in SOLAS • applicable parts of ISO and IEC standards referred to for information in MSC/Circ.982 • STCW Code • ISM Code This Recommendation is developed to serve as a self-contained document for the understanding and application of the requirements, supported by: • Annex A giving guidance and examples on how the requirements set forth may be met by acceptable technical solutions. The guidance is not regarded mandatory in relation to the requirements and does not in any way exclude alternative solutions that may fulfil the purpose of the requirements. -
1970 40' Tollycraft Tri-Cabin My
1970 40’ TOLLYCRAFT TRI-CABIN MY | PHOENIX $239,000 YEAR 1970 | LENGTH 40’ | ENGINE/FUEL TYPE TWIN/DIESEL LOCATED IN BELLINGHAM WA HULL MATERIAL FIBERGLASS | YW# 80009-3180330 PHOENIX is a Custom Resto-Mod 40’ Tollycraft tri-cabin that the owners have completely morphed into a modern-classic with today’s technology and an updated tasteful twist on the original Tollycraft interior. The vessel has been meticulously maintained and is a true show quality motor yacht. New John Deere power allows this stable vessel to cruise at 20 MPH and burn 20.5 gallons an hour or be a super econom- ical trawler. The best of both worlds, being able to cruise economically and the capability to have a fast cruise to make a passage or beat a storm front. Few vessels have this fuel burn capability, especially for a 28,000 pound vessel. SPECS This is an opportunity to own a truly unique and BUILDER Tollycraft beautiful Tollycraft. You will have to view the DESIGNER Ed Monk PHOENIX to see what a true value it represents. HULL SHAPE Modified Vee DIMENSIONS NOTABLE FEATURES LOA 40 FT 2 IN • Two staterooms, 2 heads, and an open BEAM 13 FT 4 IN bright main salon, all newly updated. MINIMUM DRAFT 3 FT 2 IN • Beautiful handcrafted teak cabinetry BRIDGE CLEARANCE 13 FT 4 IN • Newly redesigned galley FREEBOARD 7 FT 9 IN • New headliner DRY WEIGHT 28000 LBS • Custom $85,000 paint job from gunnels up ENGINES three years ago. ENGINE BRAND JOHN DEERE • March 2018 - Annual haul out, bottom inspection, ENGINE MODEL 6068 new zincs, and hull buff & wax. -
7180 Rudder Angle Indicator Manual
7180 Rudder Angle Indicator Owner’s Operation, Installation & Maintenance Manual February 2019 Kobelt Manufacturing Co. Ltd. 7180 Rudder Angle Indicator Kobelt Manufacturing Co. Ltd. NOTES: RECORD DATA BEFORE INSTALLATION FOR FUTURE REFERENCE Model #: Serial #: Date of Purchase: Date of Installation: Rev B MNL_7180 2 of 24 7180 Rudder Angle Indicator Kobelt Manufacturing Co. Ltd. TABLE OF CONTENTS 1 Introduction ............................................................................................................ 4 1.1 Contact .................................................................................................................... 4 1.2 Safety ....................................................................................................................... 4 2 Product Description ................................................................................................. 6 2.1 Technical Data ......................................................................................................... 7 3 Operation ................................................................................................................ 8 4 Installation .............................................................................................................. 9 4.1 Mechanical .............................................................................................................. 9 4.2 Electrical ................................................................................................................ 10 5 Commissioning -
DANA R. TEICHEIRA Fire and Collision Yachts & Small Craft ASA ARM/MTS ; NAMS CMS Passenger / Crew Injury Cargo TEICHEIRA MARITIME SURVEYORS, INC
NAMS Certified Marine Surveyor Casualty Investigations Hull & Machinery DANA R. TEICHEIRA Fire and Collision Yachts & Small Craft ASA ARM/MTS ; NAMS CMS Passenger / Crew Injury Cargo TEICHEIRA MARITIME SURVEYORS, INC. USCG Licensed ASA Accredited Senior Appraiser P.O. Box 2222, PETALUMA, CA 94953 1600 ton Master Oceans ARM / MTS Telephone: 707-769-9171 Master of ToWing Vessels Commercial Marine Surveying email: [email protected] 3rd Mate Oceans any tons October 1, 2020 CONDITION AND VALUATION SURVEY / APPRAISAL REPORT VESSEL: “Golden Gate” File No. 20052 This report is issued in accordance with the terms and conditions attached as enclosure #2 The undersigned Certified Marine Surveyor / Accredited Senior Appraiser was retained by Mr. Jason Covell of the San Francisco Bar Pilots to survey the condition and appraise the value of the subject vessel. The purpose of the appraisal was to establish the Fair Market Value (FMV) of the vessel, as well as the vessel’s Replacement Cost New (RCN), as of the date of the inspection (9/21/2020), which was conducted dockside at Pier 9, San Francisco, CA. The client is the San Francisco Bar Pilots. The intended user of the survey is the San Francisco Bar Pilots, the California Pilots Commission, and Interested Underwriters. SCOPE OF WORK FOR APPRAISAL As part of the appraisal process I inspected the vessel at the Pilot Station at Pier 9 San Francisco, while the vessel was afloat. I investigated the value of the vessel based upon the definition of values listed above. Sales Comparison (Market) Approach, Cost Approach, and Income Approach were considered. No information regarding the vessel’s income was provided so this approach was not used. -
Have the Holiday You Have Always Dreamed Of…
Bavaria Cruiser 55/56 - Sailing Yacht Charter Have the holiday you have always dreamed of… Bavaria Cruiser 55/56 - Sailing Yacht Charter Introduction Welcome on our sailing boat "Eternity". We are the Demirel family: Angela “Angie”, Abdullah “Apo” and our 3 children. Apo is our captain on board and also in the family. As a captain, with 25 years’ experience, he mainly worked in Turkey, but also in Greece, Italy, Corsica, Monte Negro and Croatia. Angie, who is German, supports her husband and takes care of their 3 children. We love to live in Kemer, because we enjoy the sea as well as the mountains and it has the best climate in all Turkey. We invite you to enjoy with us Kemer's natural beauty, historical treasuries and the nice weather. Why sailing with Eternity? Eternity is suitable for individual trips. You can plan your sailing destinations and duration yourself. You can choose historical places and combine sailing with hiking. For instance you can hike on the famous 500 km (311 miles) Lycian Way from Antalya to Fethiye. We can follow you with the boat and pick you up, wherever you want to. Depending on your choice, you can cook yourself, we can cook for you, or we can take you to nice restaurants, where you can try the Turkish cuisine. We are flexible, open for special wishes and we help you with your preparations for your holiday (information, shopping and transfer). Bavaria Cruiser 55/56 - Sailing Yacht Charter Technical Details and Equipment Boat name: Eternity Boat kind: Sailing yacht / Sailboat Model: Bavaria Cruiser 55/56 Manufacturer: -
General Equipment List (Provisional) - North America
General Equipment list (Provisional) - North America GENERAL SPECIFICATIONS **______________________ • Overall Length (L.O.A)*: 18,95 m 62’2’’ • Hull length: 16,47 m 54’½’’ • Overall width: 5,45 m 17’10½’’ • Hull Beam: 5,41 m 17’9’’ • Light displacement (EC): 28 500 kg 61,729 lbs • Air draft: - max 7,34 m 24’1’’ - without T-Top 5,12 m 16’9½’’ • Draft (max): 1,4 m 4’7¼’’ • Fuel tank capacity: 2 x 2 000 L 2 x 528 US Gal • Fresh water capacity: 840 L 222 US Gal • Maximum engine power: 2 x 544 kW - 2 x 730 HP 2x730HP • Max engine certification: 2 x 544 kW - 2 x 730 HP 2 x 730HP * (with aft swim platform) ARCHITECTS / DESIGNERS ________________________ • Naval Architect: MICAD • Design: Nauta EC CERTIFICATION ** _____________________________ • Category B 3 cabin layout (standard): 4 cabin layout: ** Provisional specifications, boat in process of certification. July 2, 2021 - (non-binding document) Code Bénéteau M12855 (B) US General Equipment list (Provisional) - North America STANDARD EQUIPMENT CONSTRUCTION ______________________________________________________________________________________ HULL • Gel coat: RAL 9010 • Composition: - Sandwich (polyester resin - fiberglass - balsa core) - Structural hull counter molding in monolithic laminate (polyester resin - fiberglass) - Molding by infusion • 15 Opening portholes (incl. 3 in crew/lazerette space) DECK • Gel coat: RAL 9010 • Composition: - Sandwich (polyester resin - fiberglass - balsa core) - Molding by infusion • Diamond tip type non-slip surface DECK EQUIPMENT_____________________________________________________________________________________ -
ST290 Instrument System Owner’S Handbook Document Number: 81183-2 Date: 15 May 2003 81183 2 Preface.Book Page I Tuesday, May 6, 2003 8:38 AM
81183_2 preface.book Page 1 Tuesday, May 6, 2003 8:38 AM ST290 Instrument System Owner’s Handbook Document number: 81183-2 Date: 15 May 2003 81183_2 preface.book Page i Tuesday, May 6, 2003 8:38 AM Preface i Important information Safety notices WARNING: Product installation This equipment must be installed and operated in accordance with the Raymarine instructions provided. Failure to do so could result in personal injury, damage to your boat and/or poor product performance. WARNING: Electrical safety Make sure you have switched off the power supply before you start installing this product. WARNING: Navigation aid Although this product is designed to be accurate and reliable, many factors can affect its performance. It should therefore only be used as an aid to navigation and should never replace common sense and navigationaljudgement.Alwaysmaintainapermanentwatch so you can respond to situations as they develop. EMC conformance All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. The design and manufacture of Raymarine equipment and accessories conform to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised. Handbook information To the best of our knowledge, the information in this handbook was correct when it went to press. However, Raymarine cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of continuous product improvement may change specifications without notice. As a result, Raymarine cannot accept liability for any differences between the product and the handbook. Raymarine, SeaTalk and SeaTALK2 are registered trademarks of Raymarine Limited. -
DNVGL-RU-SHIP Pt.4 Ch.10 Steering Gear
RULES FOR CLASSIFICATION Ships Edition January 2017 Part 4 Systems and components Chapter 10 Steering gear The content of this service document is the subject of intellectual property rights reserved by DNV GL AS ("DNV GL"). The user accepts that it is prohibited by anyone else but DNV GL and/or its licensees to offer and/or perform classification, certification and/or verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the basis of and/or pursuant to this document whether free of charge or chargeable, without DNV GL's prior written consent. DNV GL is not responsible for the consequences arising from any use of this document by others. The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. DNV GL AS FOREWORD DNV GL rules for classification contain procedural and technical requirements related to obtaining and retaining a class certificate. The rules represent all requirements adopted by the Society as basis for classification. © DNV GL AS January 2017 Any comments may be sent by e-mail to [email protected] If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of DNV GL, then DNV GL shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. -
May 14, 2002 PURPOSE: to Inform the Office of Apprenticeship Training, Employer
BULLETIN 2002 06 Date: May 14, 2002 U.S. Department of Labor Distribution: Subject: New Apprenticeable Employment and Training Occupation Able Seaman Administration National Office Office of Apprenticeship All Field Tech Code: 200 Training, Employer and Labor SD+RD+SAC+; Lab.Com Services (OATELS) Washington, D.C. 20210 Symbols: DSNIP/FG Action: Immediate PURPOSE: To inform the Office of Apprenticeship Training, Employer and Labor Services (OATELS), Bureau Apprenticeship and Training (BAT) Staff of a new apprenticeable occupation: Able Seaman RAIS Code: 1043 O*NET Code: 535011.01 Training Term: 2,760 hours Type of Training: Time based BACKGROUND: OATELS’ Division of Standards and National Industry Promotion initiated the apprenticeability request for this occupation. The Able Seaman stands watch at bow or on wing of bridge to look for obstructions in the path of the vessel. He/She turns wheel on bridge or uses emergency steering apparatus to steer vessel as directed by the Mate. The Able Seaman overhauls lifeboats, and lifeboat gear and lowers or raises lifeboats with winch or falls. Other task includes painting and chipping rust on the deck or superstructure of the ship. A Qualified Able Seaman must hold a certificate issued by U.S. Coast Guard. When working aboard vessels carrying liquid cargoes, the Able Seaman must hold a tanker operator’s certificate. An Able Seaman may stow or remove cargo from ship’s hold. Assessment Sheets for Navigational Watch, a suggested work process schedule and related instruction outline are attached for your review. Able Seaman will be added to the list of occupations recognized as apprenticeable by the Office of Apprenticeship Training, Employer and Labor Services when the list is reissued. -
H5000 Operation Manual
H5000 Operation Manual ENGLISH www.bandg.com Preface As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be refl ected in this version of the manual. Please contact your nearest distributor if you require any further assistance. It is the owner’s sole responsibility to install and use the instrument and transducers in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe boating practices. NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE THE LAW. Governing Language: This statement, any instruction manuals, user guides and other information relating to the product (Documentation) may be translated to, or has been translated from, another language (Translation). In the event of any confl ict between any Translation of the Documentation, the English language version of the Documentation will be the offi cial version of the Documentation. This manual represents the product as at the time of printing. Navico Holding AS and its subsidiaries, branches and affi liates reserve the right to make changes to specifi cations without notice. Copyright Copyright © 2014 Navico Holding AS. Warranty The warranty card is supplied as a separate document. In case of any queries, refer to the brand website of your display or system: www.bandg.com Declarations and conformance This equipment is intended for use in international waters as coastal sea area administered by countries of the E.U. -
ST60 Rudder Angle Indicator Instrument Ownerts Handbook
ST60 Rudder Angle Indicator Instrument Owner’s Handbook Document number: 81123-4 Date: 1 April 2004 Raymarine, ST60 and SeaTalk are trademarks of Raymarine Limited © Handbook contents copyright Raymarine Limited 2004 Preface i Preface Important information Safety notices WARNING: Product installation & operation This equipment must be installed and operated in accordance with the Raymarine instructions provided. Failure to do so could result in personal injury, damage to your boat and/or poor product performance. WARNING: Electrical safety Make sure you have switched off the power supply before you start installing this product. WARNING: Although we have designed this product to be accurate and reliable, many factors can affect its performance. Therefore, it should serve only as an aid to navigation and should never replace commonsense and navigational judgement. Always maintain a permanent watch so you can respond to situations as they develop. EMC conformance All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. The design and manufacture of Raymarine equipment and accessories conform to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised. Handbook information To the best of our knowledge, the information in this handbook was correct when it went to press. However, Raymarine cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of continuous product improvement may change specifications without notice. Therefore, Raymarine cannot accept liability for any differences between the product and the handbook. ii ST60 Rudder Angle Indicator Instrument Owner’s Handbook Preface iii Contents Preface ......................................................................................................................i Important information ....................................................................................