Real and Virtual Images Image Formation Lateral Magnification

4/8/2016 Images Review & Summary Real and Virtual Images An image is a reproduction of an object via light. If the image can form on a surface, it is a real image and can exist even if no observer is present. If the image requires the visual system of an observer, it is a virtual image. Image Formation Spherical mirrors, spherical refracting surfaces, and thin lenses can form images of a source of light—the object—by redirecting rays emerging from the source. The image occurs where the redirected rays cross (forming a real image) or where backward extensions of those rays cross (forming a virtual image). If the rays are sufficiently close to the central axis through the spherical mirror, refracting surface, or thin lens, we have the following relations between the object distance p (which is positive) and the image distance i (which is positive for real images and negative for virtual images): 1. Spherical Mirror: (34-4, 34-3) where f is the mirror's focal length and r is its radius of curvature. A plane mirror is a special case for which , so that . Real images form on the side of a mirror where the object is located, and virtual images form on the opposite side. 2. Spherical Refracting Surface: (34-8) where n1 is the index of refraction of the material where the object is located, n2 is the index of refraction of the material on the other side of the refracting surface, and r is the radius of curvature of the surface. When the object faces a convex refracting surface, the radius r is positive. When it faces a concave surface, r is negative. Real images form on the side of a refracting surface that is opposite the object, and virtual images form on the same side as the object. 3. Thin Lens: (34-9, 34-10) where f is the lens's focal length, n is the index of refraction of the lens material, and r1 and r2 are the radii of curvature of the two sides of the lens, which are spherical surfaces. A convex lens surface that faces the object has a positive radius of curvature; a concave lens surface that faces the object has a negative radius of curvature. Real images form on the side of a lens that is opposite the object, and virtual images form on the same side as the object. Lateral Magnification The lateral magnification m produced by a spherical mirror or a thin lens is (34-6) The magnitude of m is given by http://edugen.wileyplus.com/edugen/courses/crs7165/halliday9781118230725/c34/aGFsbGlkYXk5NzgxMTE4MjMwNzI1YzM0LXNlYy0wMDQwLnhmb3Jt.enc?co… 1/2 4/8/2016 Images (34-5) where h and are the heights (measured perpendicular to the central axis) of the object and image, respectively. Optical Instruments Three optical instruments that extend human vision are: 1. The simple magnifying lens, which produces an angular magnification mθ given by (34-12) where f is the focal length of the magnifying lens. The distance of is a traditionally chosen value that is a bit more than the typical near point for someone 20 years old. 2. The compound microscope, which produces an overall magnification M given by (34-14) where m is the lateral magnification produced by the objective, mθ is the angular magnification produced by the eyepiece, s is the tube length, and fob and fey are the focal lengths of the objective and eyepiece, respectively. 3. The refracting telescope, which produces an angular magnification mθ given by (34-15) Copyright © 2014 John Wiley & Sons, Inc. All rights reserved. http://edugen.wileyplus.com/edugen/courses/crs7165/halliday9781118230725/c34/aGFsbGlkYXk5NzgxMTE4MjMwNzI1YzM0LXNlYy0wMDQwLnhmb3Jt.enc?co… 2/2.

Copy Link

Recommended publications

Object-Image Real Image Virtual Image
Object-Image • A physical object is usually observed by reflected light that diverges from the object. • An optical system (mirrors or lenses) can 3.1 Images formed by Mirrors and Lenses produce an image of the object by redirecting the light. • Images – Real Image • Image formation by mirrors – Virtual Image • Images formed by lenses Real Image Virtual Image Optical System ing diverging erg converging diverging diverging div Object Object real Image Optical System virtual Image Light appears to come from the virtual image but does not Light passes through the real image pass through the virtual image Film at the position of the real image is exposed. Film at the position of the virtual image is not exposed. Each point on the image can be determined Image formed by a plane mirror. by tracing 2 rays from the object. B p q B’ Object Image The virtual image is formed directly behind the object image mirror. Light does not A pass through A’ the image mirror A virtual image is formed by a plane mirror at a distance q behind the mirror. q = -p 1 Parabolic Mirrors Parabolic Reflector Optic Axis Parallel rays reflected by a parabolic mirror are focused at a point, called the Parabolic mirrors can be used to focus incoming parallel rays to a small area Focal Point located on the optic axis. or to direct rays diverging from a small area into parallel rays. Spherical mirrors Parallel beams focus at the focal point of a Concave Mirror. •Spherical mirrors are much easier to fabricate than parabolic mirrors • A spherical mirror is an approximation of a parabolic Focal point mirror for small curvatures.
[Show full text]
Curriculum Overview Physics/Pre-AP 2018-2019 1St Nine Weeks
Curriculum Overview Physics/Pre-AP 2018-2019 1st Nine Weeks RESOURCES: Essential Physics (Ergopedia – online book) Physics Classroom http://www.physicsclassroom.com/ PHET Simulations https://phet.colorado.edu/ ONGOING TEKS: 1A, 1B, 2A, 2B, 2C, 2D, 2F, 2G, 2H, 2I, 2J,3E 1) SAFETY TEKS 1A, 1B Vocabulary Fume hood, fire blanket, fire extinguisher, goggle sanitizer, eye wash, safety shower, impact goggles, chemical safety goggles, fire exit, electrical safety cut off, apron, broken glass container, disposal alert, biological hazard, open flame alert, thermal safety, sharp object safety, fume safety, electrical safety, plant safety, animal safety, radioactive safety, clothing protection safety, fire safety, explosion safety, eye safety, poison safety, chemical safety Key Concepts The student will be able to determine if a situation in the physics lab is a safe practice and what appropriate safety equipment and safety warning signs may be needed in a physics lab. The student will be able to determine the proper disposal or recycling of materials in the physics lab. Essential Questions 1. How are safe practices in school, home or job applied? 2. What are the consequences for not using safety equipment or following safe practices? 2) SCIENCE OF PHYSICS: Glossary, Pages 35, 39 TEKS 2B, 2C Vocabulary Matter, energy, hypothesis, theory, objectivity, reproducibility, experiment, qualitative, quantitative, engineering, technology, science, pseudo-science, non-science Key Concepts The student will know that scientific hypotheses are tentative and testable statements that must be capable of being supported or not supported by observational evidence. The student will know that scientific theories are based on natural and physical phenomena and are capable of being tested by multiple independent researchers.
[Show full text]
Lab 11: the Compound Microscope
OPTI 202L - Geometrical and Instrumental Optics Lab 9-1 LAB 9: THE COMPOUND MICROSCOPE The microscope is a widely used optical instrument. In its simplest form, it consists of two lenses Fig. 9.1. An objective forms a real inverted image of an object, which is a finite distance in front of the lens. This image in turn becomes the object for the ocular, or eyepiece. The eyepiece forms the final image which is virtual, and magnified. The overall magnification is the product of the individual magnifications of the objective and the eyepiece. Figure 9.1. Images in a compound microscope. To illustrate the concept, use a 38 mm focal length lens (KPX079) as the objective, and a 50 mm focal length lens (KBX052) as the eyepiece. Set them up on the optical rail and adjust them until you see an inverted and magnified image of an illuminated object. Note the intermediate real image by inserting a piece of paper between the lenses. Q1 ● Can you demonstrate the final image by holding a piece of paper behind the eyepiece? Why or why not? The eyepiece functions as a magnifying glass, or simple magnifier. In effect, your eye looks into the eyepiece, and in turn the eyepiece looks into the optical system--be it a compound microscope, a spotting scope, telescope, or binocular. In all cases, the eyepiece doesn't view an actual object, but rather some intermediate image formed by the "front" part of the optical system. With telescopes, this intermediate image may be real or virtual. With the compound microscope, this intermediate image is real, formed by the objective lens.
[Show full text]
How Do the Lenses in a Microscope Work?
Student Name: _____________________________ Date: _________________ How do the lenses in a microscope work? Compound Light Microscope: A compound light microscope uses light to transmit an image to your eye. Compound deals with the microscope having more than one lens. Microscope is the combination of two words; "micro" meaning small and "scope" meaning view. Early microscopes, like Leeuwenhoek's, were called simple because they only had one lens. Simple scopes work like magnifying glasses that you have seen and/or used. These early microscopes had limitations to the amount of magnification no matter how they were constructed. The creation of the compound microscope by the Janssens helped to advance the field of microbiology light years ahead of where it had been only just a few years earlier. The Janssens added a second lens to magnify the image of the primary (or first) lens. Simple light microscopes of the past could magnify an object to 266X as in the case of Leeuwenhoek's microscope. Modern compound light microscopes, under optimal conditions, can magnify an object from 1000X to 2000X (times) the specimens original diameter. "The Compound Light Microscope." The Compound Light Microscope. Web. 16 Feb. 2017. http://www.cas.miamioh.edu/mbi-ws/microscopes/compoundscope.html Text is available under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license. - 1 – Student Name: _____________________________ Date: _________________ Now we will describe how a microscope works in somewhat more detail. The first lens of a microscope is the one closest to the object being examined and, for this reason, is called the objective.
[Show full text]
Laboratory 7: Properties of Lenses and Mirrors
Laboratory 7: Properties of Lenses and Mirrors Converging and Diverging Lens Focal Lengths: A converging lens is thicker at the center than at the periphery and light from an object at infinity passes through the lens and converges to a real image at the focal point on the other side of the lens. A diverging lens is thinner at the center than at the periphery and light from an object at infinity appears to diverge from a virtual focus point on the same side of the lens as the object. The principal axis of a lens is a line drawn through the center of the lens perpendicular to the face of the lens. The principal focus is a point on the principal axis through which incident rays parallel to the principal axis pass, or appear to pass, after refraction by the lens. There are principle focus points on either side of the lens equidistant from the center (See Figure 1a). Figure 1a: Converging Lens, f>0 Figure 1b: Diverging Lens, f<0 In Fig. 1 the object and image are represented by arrows. Two rays are drawn from the top of the object. One ray is parallel to the principal axis which bends at the lens to pass through the principle focus. The second ray passes through the center of the lens and undeflected. The intersection of these two rays determines the image position. The focal length, f, of a lens is the distance from the optical center of the lens to the principal focus. It is positive for a converging lens, negative for a diverging lens.
[Show full text]
Lecture 37: Lenses and Mirrors
Lecture 37: Lenses and mirrors • Spherical lenses: converging, diverging • Plane mirrors • Spherical mirrors: concave, convex The animated ray diagrams were created by Dr. Alan Pringle. Terms and sign conventions for lenses and mirrors • object distance s, positive • image distance s’ , • positive if image is on side of outgoing light, i.e. same side of mirror, opposite side of lens: real image • s’ negative if image is on same side of lens/behind mirror: virtual image • focal length f positive for concave mirror and converging lens negative for convex mirror and diverging lens • object height h, positive • image height h’ positive if the image is upright negative if image is inverted • magnification m= h’/h , positive if upright, negative if inverted Lens equation 1 1 1 푠′ ℎ′ + = 푚 = − = magnification 푠 푠′ 푓 푠 ℎ 푓푠 푠′ = 푠 − 푓 Converging and diverging lenses f f F F Rays refract towards optical axis Rays refract away from optical axis thicker in the thinner in the center center • there are focal points on both sides of each lens • focal length f on both sides is the same Ray diagram for converging lens Ray 1 is parallel to the axis and refracts through F. Ray 2 passes through F’ before refracting parallel to the axis. Ray 3 passes straight through the center of the lens. F I O F’ object between f and 2f: image is real, inverted, enlarged object outside of 2f: image is real, inverted, reduced object inside of f: image is virtual, upright, enlarged Ray diagram for diverging lens Ray 1 is parallel to the axis and refracts as if from F.
[Show full text]
Mirror Set for the Optics Expansion
Mirror Holders The mirror holders have the mirrors permanently mounted. Do not remove the Mirror Set mirrors. The convex mirror is fixed in position. The concave mirror can be rotated about a vertical axis in order to offset the image slightly to the half for the Optics screen. Screen Holder Assembly Expansion Kit A half screen is used so that light from a luminous source can pass (Order Code M-OEK) through the open area, reflect from the convex mirror, and then fall on the screen region. The Mirror Set consists of a concave mirror, a convex mirror, and a half screen. When used with components from the Optics Expansion Kit (order code OEK) and a Light Source Assembly (not included with Mirror Set) Vernier Dynamics Track (order code TRACK), basic experiments on mirror optics The light source is part of the Optics Expansion Kit, and is not part of the Mirror Set. can be performed. However, most experiments require the light source, so it is described here for The Mirror Set allows students to investigate image formation from concave and convenience. convex lenses. The light source uses a single white LED. A rotating plate lets you choose various types of light for experiments. The open hole exposes the LED to act as a point Parts included with the Mirror Set source. The other openings are covered by white plastic to Fixed Convex Mirror (–200 mm focal length, shown above at left) create luminous sources. The figure “4” is for studying image Half Screen (shown above, at middle) formation, and is chosen since it is not symmetric left-right or up-down.
[Show full text]
Shedding Light on Lenses
Shedding Light on Lenses Teachers’ Notes Shedding Light on Lenses (56 minutes) is the fifth video in the phenomenal Shedding Light series of videos. Conveniently broken up into nine sections, Science teacher Spiro Liacos uses fantastic visuals and animations to explain how convex and concave lenses produce images in a wide variety of situations. After a quick recap on refraction, Spiro illustrates how magnifying glasses work and how projectors produce giant images on giant cinema screens. He then looks into, quite literally, a tuna fish’s eye to show how our eyes work. After explaining how concave lenses produce images, he discusses how spectacles help people who have vision defects. The first bonus feature takes a fun look at slow motion, fast motion and stop motion, and the second bonus feature, aimed at more advanced students, covers the mathematics of lenses and image formation. The program comes with fantastic activity sheets which will help students to learn the content and to develop new skills in drawing ray diagrams. Part A: An Introduction to Lenses A brief recap of refraction and an introduction to convex and concave lenses. Part B: Convex Lenses Convex lenses focus light rays inwards. They can be used to start a fire and are used in so-called projector headlights. Part C: Images Produced by Convex Lenses (when the object is close to the lens) Magnifying glasses, ray diagrams and reference rays… Part D: Images Produced by Convex Lenses (when the object is further than the focal length of the lens) Slide projectors, film projectors and electronic DLP projectors are the contexts in which the concept of a “real image” is demonstrated to students.
[Show full text]
Chapter 23 the Refraction of Light: Lenses and Optical Instruments
Chapter 23 The Refraction of Light: Lenses and Optical Instruments Lenses Converging and diverging lenses. Lenses refract light in such a way that an image of the light source is formed. With a converging lens, paraxial rays that are parallel to the principal axis converge to the focal point, F. The focal length, f, is the distance between F and the lens. Two prisms can bend light toward the principal axis acting like a crude converging lens but cannot create a sharp focus. Lenses With a diverging lens, paraxial rays that are parallel to the principal axis appear to originate from the focal point, F. The focal length, f, is the distance between F and the lens. Two prisms can bend light away from the principal axis acting like a crude diverging lens, but the apparent focus is not sharp. Lenses Converging and diverging lens come in a variety of shapes depending on their application. We will assume that the thickness of a lens is small compared with its focal length è Thin Lens Approximation The Formation of Images by Lenses RAY DIAGRAMS. Here are some useful rays in determining the nature of the images formed by converging and diverging lens. Since lenses pass light through them (unlike mirrors) it is useful to draw a focal point on each side of the lens for ray tracing. The Formation of Images by Lenses IMAGE FORMATION BY A CONVERGING LENS do > 2f When the object is placed further than twice the focal length from the lens, the real image is inverted and smaller than the object.
[Show full text]
11.4 the Optics of Other Devices
11.4 The Optics of Other Devices projection head Activity 11.4.1 Optics of an Overhead Projector focus knob Overhead projectors (Figure 1), like many optical systems, consist of three sys- tems that work together: a mechanical system, an electronic system, and an optical system. Their function is to project an enlarged image from a transparent film onto a distant screen. In this activity, you will see how the different optical optical components of the projector work together. stage Materials overhead projector appropriate screwdrivers projector case Procedure Figure 1 1. Before turning on the overhead projector, open the optical stage to see An overhead projector inside the projector case. Sketch the arrangement of optical components by considering what a cross-section of the projector would look like. Note the arrangement of any bulbs, mirrors, or lenses that you find in the projector case. Add the optics of the projection head to your sketch. 2. Turn on the projector to project an image of a letter onto a screen nearby. Make adjustments to focus the image. 3. Use the focus knob to move the projection head upward. How does this affect the image? Refocus the image. 4. Use the focus knob to move the projection head downward. How does this affect the image? Refocus the image. 5. Move the projector farther from the screen. How does this affect the image? Analysis (a) Draw a ray diagram, with at least three different rays, showing how light travels from the bulb to the screen. (b) In table form, describe the structure and function of each optical compo- nent of the overhead projector.
[Show full text]
Department of Physics United States Naval Academy Lecture 36: Spherical Refracting Surfaces & Thin Lenses
Department of Physics United States Naval Academy Lecture 36: Spherical Refracting Surfaces & Thin Lenses Spherical Refracting Surfaces: A single spherical surface that refracts light can form an image. The object distance p, the image distance i, and the radius of curvature r of the surface are related by n n n − n 1 + 2 = 2 1 p i r where n1 is the index of refraction of the material where the object is located and n2 is the index of refraction on the other side of the surface. Sign Convention for refracting surfaces: When the object faces a convex refracting surface, the radius of curvature r is positive. When it faces a con- cave surface, r is negative. Be careful: This is just the reverse of the sign convention for mirrors. Thus, for refracting surfaces, real images form on the side of a refracting surface that is opposite the object [Fig (a) and (b)], and virtual images form on the same side as the object [Fig (c) - (f)]. Thin Lenses: A lens is a transparent object with two refracting surfaces whose central axes coincide. In this section, we will consider two types of lenses: a lens that causes light rays initially parallel to the central axis to converge is called a converging lens (or convex lens). If, instead, it causes such rays to diverge, the lens is a diverging lens (or concave lens). A converging or convex lens can form a real image (if the object is outside the focal point) or a virtual image (if the object is inside the focal point).
[Show full text]
Geometric Optics
GEOMETRIC OPTICS I. What is GEOMTERIC OPTICS In geometric optics, LIGHT is treated as imaginary rays. How these rays interact with at the interface of different media, including lenses and mirrors, is analyzed. LENSES refract light, so we need to know how light bends when entering and exiting a lens and how that interaction forms an image. MIRRORS reflect light, so we need to know how light bounces off of surfaces and how that interaction forms an image. II. Refraction We already learned that waves passing from one media to another cause light to do two things: Change path Change wavelength which means…Change velocity (speed of light) The velocity DECREASES and the wavelength SHORTENS when light passes from a “faster” to a “slower” media. The velocity INCREASES and the wavelength LENGTHENS when light passes from a “slower” to a “faster” media. In either case, the FREQUENCY remains the same. 1 refraction, continued When light hits the interface of two media at an angle, the lower part of the ray interacts first, thus slowing it down before the rest of the ray meets the interface. This rotates the ray toward the normal. The NORMAL LINE is an imaginary line PERPENDICULAR to the interface of two media. The REFRACTIVE INDEX of a substance tells you how much light will change speed (or bend) when it passes through the substance. It is the ratio of the speed of light in the medium to the speed of light in a vacuum. The medium will commonly n is the refractive index be air, water, glass, plastic c is the speed of light in a vacuum 2 refraction, continued substance refractive index, n vacuum 1 air 1.000277 water 1.333 glass 1.50 The table of refractive index values shows you that light slows down only a little in air, but its speed is reduced about 33% in glass.
[Show full text]