DOCSLIB.ORG

Shoulder Arthroscopy Suture Anchors and Guide System

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shoulder Arthroscopy Suture Anchors and Guide System BIORAPTOR™ CURVED OSTEORAPTOR™ CURVED Shoulder Arthroscopy Suture Anchors and Guide System • Curved Drill Guides with a 25° bend improve the trajectory of drilling and optimize anchor placement in the glenoid1 • Internal structures are better protected, as the Curved Drill Guides angle the Flexible Twist Drill and anchor into bone and away from the surface1 1 Data on file at Smith & Nephew, ITR-15001065, 2011 SPIDER2 Limb Positioner • Advanced Sterile Drape features integrated patient positioning switch • Distal activation switch eliminates the need for a foot pedal • Rechargeable Battery eliminates the inconvenience of a power cord Shoulder Arthroscopy B-1 Rotator Cuff Soft Tissue Fixation HEALICOIL™ PK Suture Anchors (non-absorbable) HEALICOIL PK Suture Anchors The unique open-architecture design of the HEALICOIL PK Suture Anchor utilizes significantly less material than standard solid-core anchors, dramatically minimizing the volume of material implanted in the shoulder. The HEALICOIL PK anchor inserts easily into all densities of humeral bone. Torque is distributed along the length of the anchor during insertion and improved anchor thread engagement in the bone delivers superior pullout strength. The HEALICOIL PK Suture Anchors can be used for primary or double row repairs and in the medial row of a suture bridging technique. Non-absorbable Our non-absorbable PK suture anchors incorporate PEEK-OPTIMA® polymer from Invibio®. PEEK-OPTIMA material provides an ideal combination of strength, biocompatibility, revisability and inherent radiolucent characteristics. Reference # Description 72203378 4.5 mm HEALICOIL PK Suture Anchor with two ULTRABRAID™ (#2) Sutures (blue, blue-COBRAID), sterile 72203379 5.5 mm HEALICOIL PK Suture Anchor with Two ULTRABRAID (#2) Sutures (blue, blue-COBRAID), sterile 72203380 5.5 mm HEALICOIL PK Suture Anchor with Three ULTRABRAID (#2) Sutures (blue, blue-COBRAID, COBRAID-black), sterile Instruments 72202621 3.8 mm Tapered Awl, disposable (general hole preparation for normal bone quality) 72201915 3.8 mm Tapered Awl, reusable (general hole preparation for normal bone quality) 72203335 4.5 mm HEALICOIL Awl Dilator, reusable (hole preparation for normal and hard bone quality) 72203336 5.5 mm HEALICOIL Awl Dilator, reusable (hole preparation for normal and hard bone quality) 72203482 3.5 mm HEALICOIL Spade Tip Drill for use with 4.5 mm HEALICOIL Suture Anchor 72203483 4.5 mm HEALICOIL Spade Tip Drill for use with 5.5 mm HEALICOIL Suture Anchor Call +1 800 343 5717 (U.S.) or contact your local representative. B-2 Shoulder Arthroscopy Rotator Cuff Soft Tissue Fixation TWINFIX™ Ultra HA Suture Anchors TWINFIX Ultra HA Suture Anchors Available in a variety of size options with a choice of suture configurations, TWINFIX Ultra Suture Anchors can be used for primary or double row repairs and for the medial row of a suture bridging technique. Absorbable Our absorbable HA suture anchor combines poly-l-lactic acid (PLLA) with hydroxyapatite (HA), a calcium phosphate similar to the mineral compound of bone. Once absorbed, it has the fracture resistance of human cortical bone.* HA is a natural bone mineral shown to promote bone replacement.† Reference # Description 72202597 4.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202624 4.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202602 5.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202626 5.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202603 5.5 mm TWINFIX Ultra HA Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black) 72202608 6.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202631 6.5 mm TWINFIX Ultra HA Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202610 6.5 mm TWINFIX Ultra HA Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black), sterile Instruments 72202633 4.5 Awl Dilator for use with 4.5 mm anchor hole preparation 72202634 5.5/6.5 Awl Dilator for use with 6.5 mm anchor hole preparation 72202116 3.5 mm Spade Tip Drill for use with 4.5 mm anchor hole preparation device for hard bone 72201707 4.5 mm Spade Tip Drill for use with 5.5 mm anchor hole preparation device for hard bone 72201708 5.5 mm Spade Tip Drill for use with 6.5 mm anchor hole preparation device for hard bone * Akao, M., Aoki, H. and Kato, K., Mechanical properties of sintered hydroxyapatite for prosthetic applications. Journal of Material Science: 16, 809–812, (1981). † S.D. Cook, D.A. Funk, T.P. Schmalzried. Orthopedic Biomaterials and Implant Fixation, instructional course lecture, AAOS 63rd meeting. Shoulder Arthroscopy B-3 Rotator Cuff Soft Tissue Fixation TWINFIX™ Ultra PK Suture Anchors TWINFIX Ultra PK Suture Anchors Available in a variety of size options with a choice of suture configurations, TWINFIX Ultra Suture Anchors can be used for primary or double row repairs and for the medial row of a suture bridging technique. Non-absorbable Our non-absorbable PK suture anchor incorporates PEEK-OPTIMA® polymer from Invibio®. With a modulus similar to cortical bone, PEEK-OPTIMA exhibits an ideal combination of strength, biocompatibility, revisability and inherent radiolucent characteristics. Reference # Description 72202595 4.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202623 4.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72203103 4.5 mm TWINFIX Ultra Anchor with two #2 sutures (blue, blue-COBRAID), sterile 72202599 4.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202625 5.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202600 5.5 mm TWINFIX Ultra PK Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black), sterile 72203104 5.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (blue, blue-COBRAID), sterile 72202605 6.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202630 6.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202606 6.5 mm TWINFIX Ultra PK Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black), sterile 72203105 6.5 mm TWINFIX Ultra PK Anchor with two #2 sutures (blue, blue-COBRAID), sterile Instruments 72202621 3.8 Tapered Awl – Disposable for use with general hole preparation for normal bone quality 72201915 3.8 Tapered Awl – Reusable for use with general hole preparation for normal bone quality 72202633 4.5 Awl – Dilator for use with 4.5 mm anchor hole preparation for hard bone 72202634 5.5/6.5 Awl – Dilator for use with 5.5/6.5 mm anchor hole preparation for hard bone 72202116 3.5 mm Spade Tip Drill for use with 4.5 mm anchor hole preparation for hard bone 72201707 4.5 mm Spade Tip Drill for use with 5.5 mm anchor hole preparation for hard bone 72201708 5.5 mm Spade Tip Drill for use with 6.5 mm anchor hole preparation for hard bone CallCall +1-800-343-5717 +1 800 343 5717 (U.S.) or contact your local representative. B-4 Shoulder Arthroscopy Rotator Cuff Soft Tissue Fixation TWINFIX™ Ultra Ti Suture Anchors TWINFIX Ultra Ti Suture Anchors Available in a variety of size options with a choice of suture configurations, TWINFIX Ultra Suture Anchors can be used for primary or double row repairs and for the medial row of a suture bridging technique. Non-absorbable Titanium (Ti) suture anchors exhibit ideal fixation strength and anchor stability. Elongated distal trocar tips allow anchors to be self-tapping; without the need to predrill in most bone qualities. Reference # Description 72202893 4.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202894 4.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202895 5.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202896 5.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202897 5.5 mm TWINFIX Ultra Ti Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black), sterile 72202898 6.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (white, COBRAID-blue), sterile 72202899 6.5 mm TWINFIX Ultra Ti Anchor with two #2 sutures (COBRAID-blue, COBRAID-black), sterile 72202900 6.5 mm TWINFIX Ultra Ti Anchor with three #2 sutures (white, COBRAID-blue, COBRAID-black), sterile Instruments: 72202116 3.5 mm Spade Tip Drill for use with 4.5 mm anchor hole preparation device for hard bone 72201707 4.5 mm Spade Tip Drill for use with 5.5 mm anchor hole preparation device for hard bone 72201708 5.5 mm Spade Tip Drill for use with 6.5 mm anchor hole preparation device for hard bone 72202621 3.8 mm Tapered Awl-Disposable 72201915 3.8 mm Tapered Awl-Reusable * Item shown Shoulder Arthroscopy B-5 Rotator Cuff Soft Tissue Fixation TWINFIX™ Ultra Suture Anchors with Needles Easy-to-use handles for speed and efficiency. TWINFIX Ultra Preloaded Suture Anchors with Needles combine best-in-class anchor pullout strength* with controlled suture and needle management for your mini-open rotator cuff repairs. Ergonomically designed handles with twist-and-release needle delivery system. Preloaded and ready-to-use Trusted anchor material choices include needles in handle. After placing anchor in the bone, absorbable (HA), non-absorbable (PK) and please follow the steps below: metallic (Ti) materials. Increased visiblity; preloaded blue suture
Load more

Recommended publications
  • Metalwork & Woodwork Saws
    HAMMERS - ANVILS - METALWORK & WOODWORK SAWS C HAMMERS BENCH PIN & ANVIL 77 CABLE TACKER GUN 76 DAVID USE PHOTO COPING SAWS 79 SD0010 FRETSAW BLADES 79 FRETSAW FRAMES 79 O HAMMER S & MALLETS 72 - 74 HACKSAWS 76 - 77 MINITURE ANVILS 74 MINITURE PINS 75 MALLET MITRE BOXES 82 PIERCING SAW BLADES 78 PIERCING SAW FRAMES 78 N DAVID USE PHOTO PIN PUSHERS 75 SD0010 RAZOR SAWS 81 SAW BLADE LUBRICANT 78 SAW KNIFE BLADES 81 STAPLE GUNS 75 - 76 V-BLOCK & CLAMPS 77 WEB STRETCHER 82 T ANVILS WOOD SAWS 80 - 81 X-ACTO RAZOR SAWS 81 DAVID USE PHOTO ZONA RAZOR SAWS 79 SD0010 E SAWS N DAVID USE PHOTO SD0010 T V BLOCK & CLAMP DAVID USE PHOTO SD0010 S Last Revised 04/07/2011 71 SQUIRES MODEL & CRAFT TOOLS HAMMERS & MALLETS MAGNETIC TACK HAMMER 6oz a specially designed hammer having one striking face magnetised for use when fitting small nails JEWELLERS MALLET a lightweight stainless steel mallet similar and upholstery tacks. The head features a claw for removing to those used by watchmakers and jewellers, with a solid head and tacks, the striking surface is a magnetic split pattern. The head is knurled shaft. hardened and pol- Length 145mm. ished. Fitted on a Weight 2½oz. hickory handle. Weight 6oz, length overall CODE TYPE PRICE 265mm. HA0025 Jewellers Mallet.................................................... £3.99 WATCHMAKERS MALLET a lightweight jewellers and watch- CODE TYPE PRICE makers mallet with a solid brass head. The handle is 260mm long 051-006 Magnetic Tack Hammer 6oz................................. £14.99 and has an increased diameter and is knurled for extra grip.
    [Show full text]
  • For Vibraphone and Electronics Written for SPLICE Institute and Shaun Cayabyab
    Nathaniel Haering for vibraphone and electronics written for SPLICE Institute and Shaun Cayabyab Resplendent Shards Performance Notes -Accidentals do not carry through un-metered measures -If a specific duration is not shown in a free time section, the rubato pacing is completely at the discretion of the performer. -Assume feather pedaling when specific instructions are not given -Requires 4 average cord vibraphone mallets with rattan handle, a Bass Bow, and a hard mallet for pitch bending. Malletech Bob Becker BB34 suggested for pitch bending. ​ -Piece begins with 4 mallet stevens grip, transitions to holding bow in right hand and a cord medium hard rubber mallet in the 1st and 2nd positions respectively. The piece ends with a return to normal 4 mallet grip. -Arrows suggests a smooth and incredibly slow transition from one technique to another. This is used to show movement from dampened to open pedaling over the approximate space shown and to move on to and off of nodes on pitches marked with a dot inside a hollow note. When traditional pedaling is implied the notation “Ped” will be used. -Downward arrows require the performer to use the hard mallet to add density to the bar and move from the center node outward to lower the pitch -Up bow symbol alongside a staccato and accent asks that the bow be pulled quickly and viciously across the bar. At peak volume, stop with the hairs of the bow remaining in contact with the bar to instantly halt the sound. This creates a loud staccato burst with no residual resonance -Down bows suggest traditional bowing, allowing the note to resonate naturally -Notes with Plus Signs accompanying them suggest dead strokes; notes dampened upon hit with the mallet.
    [Show full text]
  • Luscombe, Philip (2017) What's a Mallet For: a Woodworker's Critique of the Workmanship of Risk
    Northumbria Research Link Citation: Luscombe, Philip (2017) What's A Mallet For: A Woodworker's Critique of The Workmanship of Risk. In: RTD2017 - Research Through Design Conference 2017, 22nd - 24th March 2017, Scotland, UK. URL: https://figshare.com/articles/What_s_A_Mallet_For_... <https://figshare.com/articles/What_s_A_Mallet_For_A_Woodworker_s_Critique_of_The_Wo rkmanship_of_Risk/4746922> This version was downloaded from Northumbria Research Link: http://nrl.northumbria.ac.uk/id/eprint/35344/ Northumbria University has developed Northumbria Research Link (NRL) to enable users to access the University’s research output. Copyright © and moral rights for items on NRL are retained by the individual author(s) and/or other copyright owners. Single copies of full items can be reproduced, displayed or performed, and given to third parties in any format or medium for personal research or study, educational, or not-for-profit purposes without prior permission or charge, provided the authors, title and full bibliographic details are given, as well as a hyperlink and/or URL to the original metadata page. The content must not be changed in any way. Full items must not be sold commercially in any format or medium without formal permission of the copyright holder. The full policy is available online: http://nrl.northumbria.ac.uk/policies.html This document may differ from the final, published version of the research and has been made available online in accordance with publisher policies. To read and/or cite from the published version of the research, please visit the publisher’s website (a subscription may be required.) Proceedings of the 3rd Biennial Research Through Design Conference What’s A Mallet For: A Woodworker’s Critique of The Workmanship of Risk Philip Luscombe Luscombe, P.
    [Show full text]
  • SIMPLEX Splitting Axe• Thin Shape, with Cast Iron Housing and Hickory
    Forestry Tools SIMPLEX splitting axe SIMPLEX splitting axe • thin shape, with cast iron housing and hickory handle 3007.750 Product Description Combining two tools into one, a splitting axe and a soft-face mallet of the highest professional quality, Halder's SIMPLEX splitting axes offer a significant savings in cost compared to the individual purchases of the tools. The top-tier quality of the product has been confirmed by the committee for forestry work and forestry technology (KWF). The drop-forged and hardened axe blade is ground and polished. Its slender shape makes it ideal for splitting coniferous wood. The leather cutting protection prevents injury during transport. The superplastic insert with D50mm is a medium hard plastic insert made of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, it is therefore considerably more wear-resistant and durable. Using the soft side when wedging the wood open entirely eliminates the risk of injury from metal splinters. What is more, the service life of plastic and aluminium wedges is extended substantially. Made of cast iron, the housing comes with an integrated handle protection sleeve that provides for a high level of break resistance. The long-fibre and ultra durable hickory handle is varnished and shaped ergonomically. The total weight is 2,700g. In line with the smart SIMPLEX principle, all components are replaceable and can be retrofitted. This translates to savings in both money and resources. Product features: • 2 tools in 1: Splitting axe plus soft-face mallet, considerably less costly than buying the tools individually. • The drop-forged axe blade with its thin shape is ideal for splitting coniferous wood.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Big400/Big800 Workbench Assembly Instructions
    Guide to Assembly & Usage If in doubt please Caution! Warning BiG400/BiG800Caution! Warning Workbench If in doubt please Ifcontact in doubt your please Caution!During assembly Warning contact your Caution!During assembly Warning contactIfsupplier in doubt your please Caution!During assembly Warning supplierIf in doubt please During assembly suppliercontact your During assembly Informationsuppliercontact your Ifsupplier in doubt, contact the supplier Please read Take care when Never climb on the structure Please read Takehandling care heavywhen objects Never climb on the structure Pleasethese instructions read Take care when Never climb on the structure these instructions Takehandling care heavywhen objects Never climb on the structure PleasethesePlease instructions read read these instructions thoroughlyTakehandling care heavywhen objects Never climb on the structure thesePlease instructions read handling heavy objects beforethese instructions commencing assembly & retainhandling heavy objects a Inspectcopy all for packages your reference Inspect all packages Wear appropriate Do no lean ladders, Inspectfor damage all packages and check Wear appropriate Do no lean ladders, Inspectfor damage all packages and check Wearclothing, appropriate protective Dosteps no or lean other ladders, InspectInspectforthat damage all theall packages componentsall and packagescheck ordered for damage Wearclothing, andgloves appropriate and protective footwear Dosteps no or lean other ladders, forthat damage all the components and check ordered Wearclothing,
    [Show full text]
  • Assembly Instructions 4' Workbench
    FIGURE 9 L ASSEMBLY INSTRUCTIONS 4’ WORKBENCH Model: 01048 STEP 16 Align the drawer glides on the drawer assembly to the drawer mount glides and carefully slide in. Pull the drawer in and out making sure the glides are locked together. STEP 17 Place 5/8” shelf (L) into place. Congratulations! The assembly is complete. For assembly assistance call 800-495-9278 2805 Fairview Ave. North Weekdays: 8:00 a.m. - 5:00 p.m. Central Time Roseville, MN 55113 4’ Workbench Manual Revised 12-08 Thank You for purchasing a high quality workbench from Decko Products. If you require any FIGURE 8 assistance with assembly, please contact us toll free at 1-800-495-9278. FIGURE 7 Monday through Friday 8:00 a.m. to 5:00 p.m. Central Time. B Tools Needed J • Rubber Mallet or hammer. E Assembly Tips K P • Fully read and understand these instructions before starting assembly. G • Group similar parts together. • If the use of a mallet or hammer is required, use a block or cloth to protect the finish. F • Assemble the workbench on a sturdy surface. D • Make sure the rivets seat fully in the bottom of the keyhole slots. B Do’s and Don’ts E • Do not overload the shelves and/or drawer. • Store smaller, lighter items on the top shelf and larger, heavier items on the bottom shelf. • Do not store the workbench outdoors. • It’s highly recommended to seal or paint the wood shelves when they are exposed to humid environments or when they will be subject to grease, oil or moisture contact.
    [Show full text]
  • T30069 CP Hand Tool Instruction Manual
    Instruction T30069 Manual CP Hand Tool Introduction: The T30069 Center Punch Tool installs BAND-IT 3/8" and 5/8", 201 Stainless Steel and Galvanized Carbon Steel clamps. Table of Contents: 1. Introduction & Safety Practices 2. Operating Instructions 3. Tool Assembly 4. Repair Parts List 5. 3/8" Adapter & Warranty Safety Practices: 1. Read this manual and become familiar with the tool before use. 2. Protective eyewear should be worn during use. 3. Wear appropriate gloves for handling steel. 4. When applying clamps, care should be taken to insure fingers are not in contact with the clamp during installation. 5. Never attempt to clamp objects which have the potential to burst, shatter or otherwise cause bodily harm. 6. Do not use tool on live electrical sources. BAND-IT IDEX, Inc. Document # P15087 rev. J A Unit of IDEX Corporation © Copyright 4799 Dahlia Street www.BAND-IT-IDEX.com BAND-IT IDEX, Inc. 2013 Denver, CO 80216-0307 USA All rights reserved P: 1-800-525-0758 Page 1 of 5 F: 1-800-624-3925 Operating T30069 Instructions CP Hand Tool 1 FORWARD POSITION OR “OPEN” 2 SLIDE TIGHTEN CLAMP Tighten the clamp with short downward strokes. Tension LOAD CLAMP handle should be in down position at completion of Push tension handle all the way forward. Insert tightening clamp. BAND-IT Center Punch clamp tail and push all the Note: Do not lift tension handle too high as it may open up way into tool. buckle pusher, resulting in improper clamp application. Tool Tip: To apply 3/8” wide clamps, use S03289 If clamp tension needs to be released before locking, move adapter kit.
    [Show full text]
  • Extended Performance Techniques and Compositional Style in the Solo
    EXTENDED PERFORMANCE TECHNIQUES AND COMPOSITIONAL STYLE IN THE SOLO CONCERT VIBRAPHONE MUSIC OF CHRISTOPHER DEANE Joshua D. Smith, B.M., M.M. Dissertation Prepared for the Degree of DOCTOR OF MUSICAL ARTS UNIVERSITY OF NORTH TEXAS August 2008 APPROVED: Mark Ford, Major Professor Eugene Migliaro Corporon, Minor Professor Christopher Deane, Committee Member Terri Sundberg, Chair of the Division of Instrumental Studies Graham Phipps, Director of Graduate Studies in the College of Music James C. Scott, Dean of College of Music Sandra L. Terrell, Dean of the Robert B. Toulouse School of Graduate Studies Smith, Joshua D., Extended performance techniques and compositional style in the solo concert vibraphone music of Christopher Deane. Doctor of Musical Arts (Performance), August 2008, 66 pp., 1 table, 8 figures, 20 musical examples, references, 29 titles. Vibraphone performance continues to be an expanding field of music. Earliest accounts of the presence of the vibraphone and vibraphone players can be found in American Vaudeville from the early 1900s; then found shortly thereafter in jazz bands as early as the 1930s, and on the classical concert stage beginning in 1949. Three Pieces for Vibraphone, Opus 27, composed by James Beale in 1959, is the first solo concert piece written exclusively for the instrument. Since 1959, there have been over 690 pieces written for solo concert vibraphone, which stands as evidence of the popularity of both the instrument and the genre of solo concert literature. Christopher Deane has contributed to solo vibraphone repertoire with works that are regarded as staples in the genre. Deane’s compositions for vibraphone consistently expand the technical and musical potential of the instrument.
    [Show full text]
  • Tools and Their Uses NAVEDTRA 14256
    NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
    [Show full text]
  • PLYWOOD MALLET.Pdf
    PLYWOOD MALLET Slick method of making a mallet - never need to worry about the handle loosening. See my earlier post re ergonomic parameters, apparently you should determine the bevel angle on the striking face based on mallet handle length and the length of your arm from elbow to wrist. Who knew. With three layers of 3/4" plywood, it's 2-1/4" wide, maybe just add a 1/2" layer on each side if you need something a little beefier - or maybe build in a cavity and fill it with lead shot?. The handle winds up only 3/4" thick, thinking that maybe an additional 1/4" layer on either side would let you get a little more rounded profile to the grip area - easy enough to do though (maybe make patterns to use on the router table) and Baltic Birch plywood would be the way to go. Mallet Head Angle By swirt on March 30, 2011 at 6:30 am in techniques, tools I’ve seen this issue come up and get discussed on several forums. A joiners mallet is pretty simple to make, so it is a quick and satisfying shop project to get one constructed, but then the question arises, “what angle should be put on the head?” This is an important question with advice ranging from “we don’t need no stinking angle” to use the angle that allows it to sit flat on a bench. I discovered the answer to this question in a few old Timber Framing books. It makes sense that a Timber Framer would have the answer, as they do more chiseling than most woodworkers, and certainly heavier chiseling than all.
    [Show full text]
  • CLASSIC WORKBENCH Design, Construction Notes & Techniques
    BENCHCRAFTED CLASSIC WORKBENCH Design, Construction Notes & Techniques Copyright, Benchcrafted December 2016 www.benchcrafted.com 1 DESIGN When we set out to design a new workbench for our customers, from the very beginning we decided it should, above all, be simple. Not only in function, but also to build. We make no bones about it, our vises are designed and made to work sweetly, but not to a price point. However, not everyone is ready for their ultimate Split Top Roubo bench build, either monetarily, or technically. For those looking to get their feet wet in traditional woodworking, using time-proven techniques and tools, this bench will provide all the workholding required to test the waters. For many, this will be all the bench you need, and for others it will be an excellent springboard to our Split Top Roubo, while keeping the Classic as a second bench. The Classic Workbench is based largely on the famous Plate 11 workbench from Roubo’s “The Art of the Joiner”. We’ve built dozens of these “Roubo” benches over the past decade, helped others build hundreds more and examined extant French benches from the period. We’ve haven’t changed our opinion on this fundamental design. The Classic is a simpler, easier to build version of Roubo’s Plate 11 bench that captures all the functionality of Roubo’s design. French technical schools of the late 19th and early 20th centuries were outfitted with benches just like this. Paring down the bench to its essentials, we’ve incorporated our Classic Leg Vise, Planing Stop and Holdfast as workholding devices.
    [Show full text]