DOCSLIB.ORG

VEE Advanced Techniques Notice

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
VEE Advanced Techniques Notice VEE Advanced Techniques Notice The information contained in this document is subject to change without notice. Agilent Technologies shall not be liable for any errors contained in this document. Agilent Technologies makes no warranties of any kind with regard to this document, whether express or implied. Agilent Technologies specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any other legal theory, in connection with the furnishing of this document or the use of the information in this document. Warranty Information A copy of the specific warranty terms applicable to your Agilent Technologies product and replacement parts can be obtained from your local Sales and Service Office. U.S. Government Restricted Rights The Software and Documentation have been developed entirely at private expense. They are delivered and licensed as commercial computer software as defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or DFARS 252.227-7014 (Jun 1995), as a “commercial item” as defined in FAR 52.101(a), or as Restricted computer software as defined in FAR 52.227-19 (Jun 1987) (or any equivalent agency regulation or contract clause), whichever is applicable. You have only those rights provided for such Software and Documentation by the applicable FAR or DFARS clause or the HP standard software agreement for the product involved. Copyright 2004 Agilent Technologies. All rights reserved. This document contains information which is protected by copyright. All rights are reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. ii Microsoft®, MS-DOS®, Windows®, MS Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation. UNIX® is a registered trademark of The Open Group. VEE and VEE Pro are trademarks of Agilent Technologies. Printing History Edition 2...............................March 2004 Part Number E2120-90002 iii Conventions Used in This Manual This manual uses the following typographical conventions: Advanced Italicized text is used for book titles and for Techniques emphasis. Dialog Box Bold text is used for the first instance of a word that is defined in the glossary. File Computer font represents text that you will see on the screen, including menu names, features, buttons, or text that you have to enter. dir filename In this context, the text in computer font represents an argument that you type exactly as shown, and the italicized text represents an argument that you must replace with an actual value. File ⇒ Open The “⇒” is used in a shorthand notation to show the location of VEE Pro features in the menu. For example, “File ⇒ Open” means to select the File menu and then select Open. Sml | Med | Lrg Choices in computer font, separated with bars (|), indicate that you should choose one of the options. Press Enter In this context, bold represents a key to press on the keyboard. Press Ctrl + O Represents a combination of keys on the keyboard that you should press at the same time. iv Contents 1. Introduction About This Manual ...................................................................................3 Configuring VEE ......................................................................................5 Configuring VEE for Windows...........................................................5 Color and Font Settings..................................................................5 Customizing Icon Bitmaps.............................................................6 Selecting a Bitmap for a Panel View .............................................6 Configuring VEE for UNIX ................................................................7 Color and Font Settings..................................................................7 Changing X11 Attributes (UNIX)..................................................7 Screen Colors Change (UNIX) ................................................8 Attempt to Use Too Many Colors (UNIX) ....................................8 Applications that Use a Local Color Map (UNIX) ........................9 Using Non-USASCII Keyboards (UNIX).........................................11 Using HP-GL Plotters (UNIX)..........................................................11 Using VEE Example Programs ..............................................................14 The Example Directories...................................................................14 Running the Examples.......................................................................14 Using Library Objects.............................................................................15 Formula Objects ...........................................................................15 Supported I/O Interfaces.........................................................................16 Using VEE Execution Modes.................................................................17 Setting Execution Modes...................................................................17 What is an Execution Mode? .......................................................17 Why should I want to change Execution Modes?........................18 How do I know when to change Execution Modes?....................18 Guidelines to Switching Execution Modes ..................................19 About the Compiler......................................................................19 Execution Mode Changes: VEE 3 to VEE 4 ....................................21 Line Colors in Compiler Mode ....................................................21 Potential Compatibility Problems ................................................21 Contents-1 Execution Mode Changes: VEE 4 to VEE 5..................................... 29 About the VEE 5 Execution Mode .............................................. 29 Converting Programs to VEE 5 Execution Mode........................ 29 VEE 5 Execution Mode Changes................................................. 30 Using VEE 5 Mode in HP-UX..................................................... 34 Execution Mode Changes: VEE 5 to VEE 6..................................... 35 About the VEE 5 Execution Mode .............................................. 35 New Data Types........................................................................... 35 Variant to VEE Data Type Conversion - Improved Array Handling 35 Updated Functions ....................................................................... 37 Related Reading...................................................................................... 38 2. Instrument Control Fundamentals Introduction to Direct I/O.................................................................. 44 An Example of Direct I/O............................................................ 44 MultiInstrument Direct I/O ................................................................................ 44 Introduction to VXIplug&play ........................................................... 46 Getting Started ............................................................................. 46 What You Need............................................................................ 47 Installing the VXIplug&play Driver Software............................. 47 Location of Files (WIN95 and WINNT Frameworks)................. 47 Location of Files (HP-UX Framework)....................................... 48 Summary of Terminology............................................................ 48 A VXIplug&play Example Program............................................ 48 Further Information...................................................................... 49 Introduction to Panel Drivers and Component Drivers..................... 49 Panel Drivers................................................................................ 49 Component Drivers...................................................................... 50 Further Information...................................................................... 52 Support For Register-Based VXI Devices ........................................ 52 3. Configuring Instruments Using the Instrument Manager ............................................................... 58 Overview ........................................................................................... 58 Contents-2 Auto Discovery..................................................................................60 The Instrument List ...........................................................................61 Instrument Configuration ..................................................................63 Renaming an Instrument....................................................................65 Adding an Instrument Configuration ...........................................67 Adding a Panel Driver or Component Driver....................................72 Editing an Instrument Configuration............................................73 Editing an Interface Configuration...............................................75 Configuring for a Direct I/O Object ..................................................76 Configuring for a VXIplug&play Driver ..........................................79 Configuring for a PC PlugIn Card.....................................................83 Details of the Properties Dialog Boxes...................................................85
Load more

Recommended publications
  • Programmer's Guide Agilent Technologies E4406A VSA Series Transmitter Tester
    Programmer’s Guide Agilent Technologies E4406A VSA Series Transmitter Tester Manufacturing Part Number: E4406-90303 Supersedes E4406-90176 Printed in USA May 2007 © Copyright 1999 - 2001, 2007 Agilent Technologies, Inc. Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Technology Licenses The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license. Restricted Rights Legend If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is delivered and licensed as “Commercial computer software” as defined in DFAR 252.227-7014 (June 1995), or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is subject to Agilent Technologies’ standard commercial license terms, and non-DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
    [Show full text]
  • Htbasic Development Version
    HTBasic Development Version Written by Administrator Wednesday, 18 February 2009 02:45 - TransEra HTBasic, compatible with Hewlett-Packard's 9000 Series 200/300 Rocky Mountain BASIC, runs on PCs in DOS or Windows. HTBasic is a powerful scientific /engineering language that combines the ease-of-use of BASIC, the math capabilities of FORTRAN and the structured-programming of Pascal and C. When combined with IEEE-488 or data acquisition plug-in cards, HTBasic turns your PC into a full-featured instrument controller. HTBasic provides the Rocky Mountain BASIC integrated program development environment including a syntax-sensitive, full screen editor and interactive execution and debugging statements. HTBasic's LIF transfer utilities allow you to effortlessly port your current HP BASIC data and program files between HP Series 200/300 workstations and PCs (not supported under Windows NT, Windows 2000, or Windows XP). LIF utilities copy programs and data files stored in BDAT, ASCII and HP-UX format between LIF format floppy diskettes and DOS disks. For considerations and instructions on how to port your HP BASIC/9000 programs to HTBasic for Windows, click here: HTBasic Porting Guide.pdf . Once transferred, programs can be run with little or no change avoiding time consuming and costly program rewrites. And the CONFIGURE statement customizes HTBasic to match an HP workstation environment. You get all of the capabilities needed for complex applications without sacrificing inter-platform compatibility. HTBasic can simultaneously share data files over the network with HP BASIC workstations (using SRM/UX), HP BASIC/UX and HP BASIC DOS (measurement coprocessor II cards using NFS).
    [Show full text]
  • Introducing the HP Vectra Qsl20 PC -Top-Of-The-Line Desktop 80386 Power
    Information For Hewlett-Packard's Value-Added Businesses April 1989 ,' -1 'r. 9 4 Introducing the HP Vectra QSl20 PC -top-of-the-line desktop 80386 power HEWLETT PACKARD Table of Contents Volume 8, No. 6 8 Portable Editor Discontinuance announcement for Tracy Wester HP Portable Vectra CS PC I The HP NewWave environment - your HP Channels is published monthly for winning strategy for 1989 9 Desktop Introducing a desktop star: Hewlett-Packard's value-added busi- the HP Vectra QS120 PC nesses to provide you with information Peripherals about HP's products and services to - - help you be more successful. 10 Mass Storage Business Computers HP 7907A disk drive discontinuance plans For further information on any of the 2 General HP 9123D discontinuance products and services discussed in Special discounts on HP ALLBASEIQUERY. 11 Networks HP Channels, please contact your HP HP ALLBASEAGL, and HP ALLBASE ADCC Main to be removed from sales rep. ProcmonIV and TransformIV obsolescence HP Price List HP Officeshare family now supports 11 Printers See back cover for subscription Compaq PCs New HP Paintlet printer transparency film information. Technical Computers Does the ProCollection font cartridge replace other font cartridges'? Note: Not all HP computer products 3 General are sold and supported in all countries. HP BASIC-UX system shipping Supplies Please check with your local HP sales BASIC 5.13 now shipping 13 Supplies ofice. HP Pascal Language Processor products to HP DIRECT order phone numbers become obsolete Hewlett-Packard does not warrant the 4 HP1000 accuracy of the information provided in Announcing 5.1 release for HP 1000 HP Channels and shall not be liable Personal Computers for any use made of the information 6 General contained herein.
    [Show full text]
  • USB 100Khz GPIB (IEEE-488.2)
    ® GPIB Controllers GPIB USB USB 100kHz GPIB (IEEE-488.2) Controller Card, with GPIB Library Software USER’S MANUAL VER. 2.0C • SEP 2008 No part of this manual may be reproduced without permission ® CyberResearch , Inc. www.cyberresearch.com 25 Business Park Dr., Branford, CT 06405 USA 203-483-8815 (9am to 5pm EST) FAX: 203-483-9024 ©Copyright 2008 All Rights Reserved. September 3rd 2008 The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of CyberResearch, Inc. In no event will CyberResearch, Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of CyberResearch, Inc. Trademarks “CyberResearch,” and “GPIB USB,” are trademarks of CyberResearch, Inc. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. • NOTICE • CyberResearch, Inc. does not authorize any CyberResearch product for use in life support systems, medical equipment, and/or medical devices without the written approval of the President of CyberResearch, Inc. Life support devices and systems are devices or systems which are intended for surgical implantation into the body, or to support or sustain life and whose failure to perform can be reasonably expected to result in injury.
    [Show full text]
  • Capacitance-Voltage Measurements: an Expert System Approach
    Capacitance-Voltage Measurements: an Expert System Approach Thesis submitted by James Austin Walls for the degree of Doctor of Philosophy Edinburgh Microfabrication Facility Department of Electrical Engineering University of Edinburgh United Kingdom Abstract The problems for automating capacitance-voltage (C-V) based process monitoring tests are many and varied. The challenges are: interpreting numerical and graphical data, and secondly, performing tests in a correct sequence whilst applying the appropriate simplifying assumptions in the data analysis. A progressive series of experiments using connectionism, pattern-recognition and knowledge-based techniques were researched, culminating with the development of a fully automatic hybrid system for the control of the Hewlett-Packard HP4061 semiconductor test system. This thesis also includes a substantial review of, and guide to, the theory and practice of the high-frequency, low-frequency and pulsed C-V measurements, conductance-voltage and capacitance-time measurements. Several novel software packages have been written (CV-ASSIST, CV- EXPLORE), including a rule-based expert system (CV-EXPERT) for the control and opportunistic sequencing of measurements and analyses. The research concludes that the new approaches offer the full power and sensitivity of C-V measurements to the operator without the burden of careful procedure, interpretation of the data, and validation of the algorithms used. Acknowledgements This thesis is the result of a Cooperative Award in Science and Engineering (CASE) with Hewlett Packard (UK) Ltd.. The support from the U.K. Science and Engineering Research Council (grant No. GR/F 30499) is also gratefully acknowledged. I would like to express my thanks to my supervisor, Dr. A.J.
    [Show full text]
  • 4895 Serial Gpib Bus Controller
    IEEE 488/GPIB CONTROL 4895 SERIAL GPIB BUS CONTROLLER ■ Adds full GPIB Bus controller capability to any DESCRIPTION computer with a serial port. Easiest way to add GPIB bus The 4895 adds a complete IEEE control capability to a serial 488.2 Bus Controller capability to port. any PC or computer with a RS-232/ RS-422 or RS-485 serial interface. ■ Automatic DMA provides By connecting the 4895 to your high speed GPIB data transfer computer's serial COM port, the 4895 >600 K bytes/sec. enables any computer to control IEEE Fast GPIB-to-Serial buffer. 488/GPIB or HP-IB bus instruments ■ at distances from a few feet up to Uses HP BASIC style com- 1,200 feet from the computer. The 4895 Serial to GPIB Controller mands to control instruments. normal use of the 4895 is in the S-Mode The worlds most familiar where the 4895 accepts high level commands GPIB/HP-IB control lan- over the serial link to control and operate GPIB guage. GPIB to Serial Interface Mode devices. Response data from the GPIB devices is ■ Includes IEEE 488.2 quickly inputted into the 4895's 192 Kbyte buffer While the 4895 is primarily a Serial to GPIB Command Protocols. and then returned over the serial link to the host Controller, it does have a reverse G-Mode. When Simplifies GPIB programs. computer. Applications include controlling local used as a GPIB to Serial Interface (G-Mode), the or remote GPIB instruments without the need for 4895 becomes a 488.2 compatible GPIB interface ■ Includes National Instruments GPIB bus extenders.
    [Show full text]
  • A Comparison of Leading Switch Measure Solution.Pdf
    A Comparison of Leading Switch/Measure Solutions Application Note This application note compares the features, execu- • Dedicated instruments with proprietary backplanes tion speed and ease of software development for containing a DMM and a variety of switch cards, switch/measure solutions used in functional test such as the Agilent 34980A, Agilent 34970A, and and data acquisition environments. It examines Keithley 2701 Switch/Measure Units. the Keithley 27xx, Racal 1256, Agilent 34970A and Each type of solution has pluses and minuses, Agilent 34980A Switch/Measure Units, as well which will be discussed in depth here. However, as an Agilent 3499A/34401A combination, Agilent the use model of this equipment generally falls into E1411B/ E1476A VXI combination, and a National two categories: Data Acquisition and Electronic Instruments PXI-4070/SCXI-1128 PXI combination Functional Test. Which solution you choose will in the Visual Studio.NET application development depend greatly on your intended use. environment. The difference between data acquisition and Switch/measure system characteristics Electronic functional test While a number of complex measurement functions The same voltmeter and switch can be used in two can be present in a test system, two components are types of test systems: almost always present – a digital multimeter (DMM) and a bank of relays (switches). A fundamental • Data acquisition (DAQ), in which numerous read- core, then, is a switch/measure function. This can ings are taken to characterize performance of a be implemented in three different ways: mechanical, electrical or electronic device, such as measuring the temperature at thousands of points • Discrete instruments with cable interconnects, such on a spacecraft as it re-enters the atmosphere as an Agilent 34401A standalone DMM or E1411B VXI DMM connected to an Agilent 3499A/B/C • Electronic functional test (EFT), in which stimuli switchbox or Racal 1256 switchbox.
    [Show full text]
  • Agilent Technologies 8920B RF Communications Test Set GPIB Programmer's Guide
    Agilent Technologies 8920B RF Communications Test Set GPIB Programmer’s Guide SCREEN CONTROL INSTRUMENT STATE MSSGHELP CONFI HOLD PRINT ADRS SAVE MEAS RX TX DUPLE PREV TESTS LOCAL RECAL PRESE USER DATA FUNCTIONS DATA k1’ REF METER AV G INCR INCR INCR k1 789ENTER k2’ LO HI dB k2 GHz k3’ 456 CURSOR CON- k3 % ASSIG 123MHz k4 s RELEA + _ kHz k5 PUSH TO 0 YES NO Ω ms ppm % Hz SHIFT CANCE ON/OFF MEMO MIC/ VOL- SQUELC AUDIO AUDIO IN RF IN/OUT DUPLEX OUT ANT IN HI LO POWE OF O MAX POWER MAX MAX ! ! MAX POWER 200 ! ! Firmware Versions: Agilent 8920B B.06.00 and above Agilent Part Number: 08920-90222 Printed in U. S. A. April 2000 Rev. D 1 © Copyright Agilent Technologies 1996-2000 Notice No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Agilent Technologies Inc. as governed by United States and international copyright laws. The material contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
    [Show full text]
  • 4895 Serial Gpib Bus Controller
    Product Datasheet - Technical Specifications More information in our Web-Shop at www.meilhaus.com and in our download section. Your contact Technical and commercial sales, price information, quotations, demo/test equipment, consulting: Tel.: +49 - 81 41 - 52 71-0 FAX: +49 - 81 41 - 52 71-129 E-Mail: [email protected] Downloads: www.meilhaus.com/en/infos/download.htm Meilhaus Electronic GmbH Tel. +49 - 81 41 - 52 71-0 Am Sonnenlicht 2 Fax +49 - 81 41 - 52 71-129 82239 Alling/Germany E-Mail [email protected] Mentioned company and product names may be registered trademarks of the respective companies. Prices in Euro plus VAT. Errors and omissions excepted. © Meilhaus Electronic. www.meilhaus.de IEEE 488/GPIB CONTROL 4895 SERIAL GPIB BUS CONTROLLER ■ Adds full GPIB Bus controller capability to any DESCRIPTION computer with a serial port. Easiest way to add GPIB bus The 4895 adds a complete IEEE control capability to a serial 488.2 Bus Controller capability to port. any PC or computer with a RS-232/ RS-422 or RS-485 serial interface. ■ Automatic DMA provides By connecting the 4895 to your high speed GPIB data transfer computer's serial COM port, the 4895 >600 K bytes/sec. enables any computer to control IEEE Fast GPIB-to-Serial buffer. 488/GPIB or HP-IB bus instruments ■ at distances from a few feet up to Uses HP BASIC style com- 1,200 feet from the computer. The 4895 Serial to GPIB Controller mands to control instruments. normal use of the 4895 is in the S-Mode The worlds most familiar where the 4895 accepts high level commands GPIB/HP-IB control lan- over the serial link to control and operate GPIB guage.
    [Show full text]
  • Using the IBASIC Programming Environment on the HP 8920 Test Set Family
    This literature was published years prior to the establishment of Agilent Technologies as a company independent from Hewlett-Packard and describes products or services now available through Agilent. It may also refer to products/services no longer supported by Agilent. We regret any inconvenience caused by obsolete information. For the latest information on Agilent’s test and measurement products go to: www.agilent.com/find/products Or in the U.S., call Agilent Technologies at 1-800-452-4844 (8am–8pm EST) HP 8920, 8921 RF Communications Test Set Family Product Note Product Using the IBASIC Programming Environment on the HP 8920 Test Set Family Table of Contents Conventions used in this Product Note ........................................................... 5 Chapter 1 - Overview of the Test Set ............................................................... 6 Reference Documents ................................................................................................ 6 Table 1-1. Useful Programming Documents ......................................................... 6 The Test Set.................................................................................................................. 6 Available Software ..................................................................................................... 6 This Product Note........................................................................................................ 7 Test Set Operating Modes.........................................................................................
    [Show full text]
  • 1 Instrumentation and Control by Notebook PC
    Instrumentation and control by notebook PC - Invitation to HT(HP) – BASIC- Tominaga, Masaki Researcher Advanced Technology Research Group, National Research Institute for Earth Science and Disaster Prevention Abstract Instrumentation and control systems by use of computer are becoming popular. Most of them that we can use in daily experiments are offered in the form of pre-fixed systems. The pre-fixed systems are designed to remove complexity in the setup of the instrumentation and control systems. It is true that the hardware is well combined with the software in those systems, but it is difficult or impossible for us to modify them for our own. Use. On the other hand the published software that have flexibility in use are so well designed that researcher cannot see what is going on in the systems or the programs. In the present paper HT-BASIC is introduced for the use of instrumentation and control by use of notebook PC. The HP-BASIC was a well-acknowledged software to control measurement systems by PC. Researchers could manipulate them for their own use. Since discontinuance of the PC specified for the use of the HP-BASIC the software became unpopular. But new version of the HP-BASIC that name was changed to “HT-BASIC for WINDOWS” is designed to work well in WINDOWS environment. We can make personal systems for instrument and control by the “HP-BASIC for WINDOWS” without much difficulty. Keywords; Notebook PC, BASIC, Field instrumentation, User oriented instrumentation system 1. Foreword These days computers have been widespread and owned privately as multipurpose terminals for information retrieval through internet, e-mail exchange and creating documents.
    [Show full text]
  • Appendix a Menus, Buttons, the Mouse, and Data Flow
    Appendix A Menus, Buttons, the Mouse, and Data Flow Introduction This appendix explains instructions on how to use the mouse. The explanation is followed by a description of how data flows into, within, and out of an Object. This appendix concludes with the Object Order of Operation sequence. Menus and Buttons The menus for VEE Pro are the top line of words; this line is known as the Menu Bar. Pull down a Menu Bar that includes an arrow to the right of the listing. It indicates a submenu. Three dots … after a menu word indicate that one or more dialog boxes will follow. (File => Open … is an example.) The second line of icons (also known as buttons) is known as the Tool Bar. Their contents are given below: Menu Bar: Menus and Submenus File File (continued) New Ctrl + N Print Program… Open… Ctrl + O Print Objects… Merge… Print Setup… Merge Library… Programs (previously opened): Save Ctrl + S 1 Save As… Ctrl + W 2 Save Objects … 3 Create Secured RunTime Version… etc Save Documentation … Exit Ctrl + E Default Preferences Send Program by Email Edit Print Screen … Cut Ctrl + X Copy Ctrl + C A.2 Appendix A Menus, Buttons, the Mouse, and Data Flow File (continued) Debug (continued) Paste Ctrl + V Clear All Breakpoints Select All Ctrl + A Activate Breakpoints (toggle) Delete Lines Shift + Ctrl + LB Show Data Flow Clean Up Lines Show Execution Flow Find… Ctrl + F Line Probe Shift + LB Find Results Object Probe Shift + LB Add To Panel Align Flow Middles Start Tops If/Then/Else Bottoms Conditional Centers If A == B Lefts If A ~= B Rights If A !=
    [Show full text]