DOCSLIB.ORG

Customer Total Amount

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Customer Total Amount 1 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 Insured: Mullen,Kevin Property: 1991 Fairwood ln State College, PA Contractor: Cellular: (814) 470-5742 Company: Mammoth Inc. E-mail: scott@mammothrestoration. com Business: 320 West College Ave. Pleasant Gap, PA 16823 Claim Number: Policy Number: Type of Loss: Date of Loss: Date Received: Date Inspected: Date Entered: 9/12/2013 8:58 PM Price List: PAAL7X_AUG13 Restoration/Service/Remodel Estimate: 2013-09-12-2058 This is an initial estimate to repair/remove the cat urin from the property. 2 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 2013-09-12-2058 Main Level closet 1 Height: 8' DESCRIPTION QNTY 8. R&R Oak flooring - #1 common - no finish 19.50 SF 9. Sand, stain, and finish wood floor 19.50 SF 10. R&R Baseboard - 2 1/4" 21.83 LF 11. Paint baseboard - two coats 21.83 LF 12. R&R Sheathing - plywood - 3/4" - tongue and groove 19.50 SF 13. R&R 2" x 4" lumber (.667 BF per LF) 20.00 LF 14. Carpenter - General Framer - per hour 2.00 HR Framing labor is to install nailers to install the new subfloor Bathroom Height: 8' DESCRIPTION QNTY 15. R&R Oak flooring - #1 common - no finish 67.57 SF 16. Sand, stain, and finish wood floor 67.57 SF 17. R&R Baseboard - 2 1/4" 37.00 LF 18. Paint baseboard - two coats 37.00 LF 19. R&R Sheathing - plywood - 3/4" - tongue and groove 67.57 SF 20. R&R 2" x 4" lumber (.667 BF per LF) 30.00 LF 21. Carpenter - General Framer - per hour 3.00 HR Framing labor is to install nailers to install the new subfloor closet 2 Height: 8' DESCRIPTION QNTY 22. R&R Oak flooring - #1 common - no finish 11.15 SF 23. Sand, stain, and finish wood floor 11.15 SF 24. R&R Baseboard - 2 1/4" 15.83 LF 25. Paint baseboard - two coats 15.83 LF 26. R&R Sheathing - plywood - 3/4" - tongue and groove 11.15 SF 27. R&R 2" x 4" lumber (.667 BF per LF) 20.00 LF 28. Carpenter - General Framer - per hour 2.00 HR Framing labor is to install nailers to install the new subfloor 2013-09-12-2058 9/19/2013 Page: 2 3 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 Living Room Height: 8' DESCRIPTION QNTY 1. R&R Oak flooring - #1 common - no finish 205.00 SF 2. Sand, stain, and finish wood floor 205.00 SF 3. R&R Baseboard - 2 1/4" 72.67 LF 4. Paint baseboard - two coats 72.67 LF 5. R&R Sheathing - plywood - 3/4" - tongue and groove 205.00 SF 6. R&R 2" x 4" lumber (.667 BF per LF) 60.00 LF 7. Carpenter - General Framer - per hour 6.00 HR Framing labor is to install nailers to install the new subfloor Bedroom 1 Height: 8' DESCRIPTION QNTY 29. R&R Oak flooring - #1 common - no finish 189.00 SF 30. Sand, stain, and finish wood floor 189.00 SF 31. R&R Baseboard - 2 1/4" 59.50 LF 32. Paint baseboard - two coats 59.50 LF 33. R&R Sheathing - plywood - 3/4" - tongue and groove 189.00 SF 34. R&R 2" x 4" lumber (.667 BF per LF) 60.00 LF 35. Carpenter - General Framer - per hour 6.00 HR Framing labor is to install nailers to install the new subfloor Bedroom 2 Height: 8' DESCRIPTION QNTY 36. R&R Oak flooring - #1 common - no finish 104.00 SF 37. Sand, stain, and finish wood floor 104.00 SF 38. R&R Baseboard - 2 1/4" 41.33 LF 39. Paint baseboard - two coats 41.33 LF 40. R&R Sheathing - plywood - 3/4" - tongue and groove 104.00 SF 41. R&R 2" x 4" lumber (.667 BF per LF) 60.00 LF 42. Carpenter - General Framer - per hour 6.00 HR Framing labor is to install nailers to install the new subfloor 51. Drywall Repair - Minimum Charge - Labor and Material 1.00 EA 52. Paint the walls - two coats 330.67 SF Dining Room Height: 8' DESCRIPTION QNTY 2013-09-12-2058 9/19/2013 Page: 3 4 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 CONTINUED - Dining Room DESCRIPTION QNTY 50. R&R Laminate - simulated wood flooring 124.00 SF 45. R&R Baseboard - 2 1/4" 44.67 LF 46. Paint baseboard - two coats 44.67 LF 47. R&R Sheathing - plywood - 3/4" - tongue and groove 124.00 SF 48. R&R 2" x 4" lumber (.667 BF per LF) 30.00 LF 49. Carpenter - General Framer - per hour 2.00 HR Framing labor is to install nailers to install the new subfloor Basement Family Room Height: 8' DESCRIPTION QNTY 53. R&R Suspended ceiling tile - 2' x 2' 337.25 SF 54. R&R Suspended ceiling grid - 2' x 2' 337.25 SF 55. Acid wash stone floor 337.25 SF 56. Epoxy finish - two coats over concrete floor 337.25 SF 74. Deodorize building - Hot thermal fog 2,698.00 CF Hallway Height: 8' DESCRIPTION QNTY 57. R&R Suspended ceiling tile - 2' x 2' 38.25 SF 58. R&R Suspended ceiling grid - 2' x 2' 38.25 SF 59. Acid wash stone floor 38.25 SF 60. Epoxy finish - two coats over concrete floor 38.25 SF 75. Deodorize building - Hot thermal fog 306.00 CF Room3 Height: 8' DESCRIPTION QNTY 76. Deodorize building - Hot thermal fog 286.67 CF 2013-09-12-2058 9/19/2013 Page: 4 5 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 Room4 Height: 8' DESCRIPTION QNTY 77. Deodorize building - Hot thermal fog 144.00 CF Laundry Room Height: 8' DESCRIPTION QNTY 65. R&R Suspended ceiling tile - 2' x 2' 55.00 SF 66. R&R Suspended ceiling grid - 2' x 2' 55.00 SF 67. Acid wash stone floor 55.00 SF 68. Epoxy finish - two coats over concrete floor 55.00 SF 78. Deodorize building - Hot thermal fog 440.00 CF Room6 Height: 8' DESCRIPTION QNTY 79. Deodorize building - Hot thermal fog 16.11 CF Game Room Height: 8' DESCRIPTION QNTY 61. R&R Suspended ceiling tile - 2' x 2' 230.63 SF 62. R&R Suspended ceiling grid - 2' x 2' 230.63 SF 63. Acid wash stone floor 230.63 SF 64. Epoxy finish - two coats over concrete floor 230.63 SF 80. Deodorize building - Hot thermal fog 1,845.00 CF sewing room Height: 8' DESCRIPTION QNTY 69. R&R Suspended ceiling tile - 2' x 2' 85.94 SF 70. R&R Suspended ceiling grid - 2' x 2' 85.94 SF 71. Acid wash stone floor 85.94 SF 72. Epoxy finish - two coats over concrete floor 85.94 SF 73. Deodorize building - Hot thermal fog 687.56 CF 2013-09-12-2058 9/19/2013 Page: 5 6 Mammoth Inc. 320 West College Ave. Pleasant Gap PA 16823 EIN-26-3403651 PA Contractor Licsense - PA025955 PH-(814)470-5742 Fax- (814)690-1677 Grand Total 24,893.65 Grand Total Areas: 4,469.78 SF Walls 1,523.14 SF Ceiling 5,992.92 SF Walls and Ceiling 1,523.14 SF Floor 169.24 SY Flooring 551.67 LF Floor Perimeter 0.00 SF Long Wall 0.00 SF Short Wall 594.00 LF Ceil. Perimeter 1,523.14 Floor Area 1,672.92 Total Area 4,469.78 Interior Wall Area 2,664.00 Exterior Wall Area 296.00 Exterior Perimeter of Walls 0.00 Surface Area 0.00 Number of Squares 0.00 Total Perimeter Length 0.00 Total Ridge Length 0.00 Total Hip Length 2013-09-12-2058 9/19/2013 Page: 6 7 Basement 2013-09-12-2058 9/19/2013 Page: 7 8 Main Level 2013-09-12-2058 9/19/2013 Page: 8.
Load more

Recommended publications
  • Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass
    Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass skilled framer needs to be prepared to han- dle just about any form of artwork a cus- Atomer presents. Artwork that is seen less often can test a framer’s nerves since the particular needs and framing methods of that type of art might not come readily to mind. This is precisely why framers need to be prepared beforehand. After all, the design counter is not the place to learn about framing new type of artwork if the customer is to have confidence that the job will be done right. One such type of art is stained glass. Despite the fact that stained glass as an art has existed for 1,000 years, it’s not every day that someone brings a piece in to be framed. Displaying stained glass Traditional stained glass work, such as may seem intimidating, that found in but it can be framed churches and important build- and handled routinely ings, is worked in Stained glass worked in the Tiffany method midway through the lead came the soldering process. Once the soldering is complete, a small by following a few metal frame is applied, the solder has a patina applied, and the method. Relatively entire piece is cleaned and polished. basic design principles large pieces of glass, cut to shape, are held within H-shaped channels of lead known as foil strip, usually about ¼” wide, to the edge of the “came.” The ends of the came are soldered to adja- individual pieces of glass, burnishing and folding it cent pieces, and the glass is held tight with mastic to either side of the glass.
    [Show full text]
  • Framer Modular.Indd
    Assemblyy table for panelsp This Framer Modular is a component-based framing & assembly table for off -site panel construction. This system is a perfect solution for those who like to “do it yourselves”. Engineered components are fl at-packed and bolt- assembled to minimize transportation and installation costs while delivering a fl exible, fully customized wall panel assembly station. The Framer Modular is designed to deliver the best framing table solution for shops looking for effi ciency, accuracy, and fl exibility at an aff ordable budget. This system is customizable and expandable, with kits of components and accessories allowing shops to build the worktable to suit their specifi c production needs. This DIY delivery & assembly system optimizes an upfront investment through fl exible options while off ering the same robust, engineered panel assembling technology for which Soukup strives without compromise The Framer Modular is supplied as a kit with optional accessories can be assembled in various confi gurations to support the production of: Panel lengths at 6, 9.4, and 12.8 meters Panel widths from 400 to 3000 mm Optional extensions, up to 3800 mm at a working height of 700mm. The Framer Modular System comprises: Expandable Supporting Frame Structure Customizable Tabletop Elements Framing and Assembly Accessories Expandable Supporting Frame Structure 6-meter Table Confi guration: Consists of 2 End Modules 9.4-meter Table Confi guration: Consists of 2 End Modules + 1 Center Module 12.8-meter Table Confi guration: Consists of 2 End Modules + 2 Center Modules DIY: Build your own supporting frame structure with KVH structural timber according to our instruction manual.
    [Show full text]
  • Framer Series Lumber Specifier's Guide
    #LB-4020 SPECIFIER’S GUIDE WEYERHAEUSER FRAMER SERIES® LUMBER WITH WARPSTABLETM TECHNOLOGY Structural Framing Lumber with Predictable Performance • Computerized grading virtually eliminates warp • Comes with crown edge clearly marked • Eliminates field culling • Treated with a mold inhibitor • More stable and consistent than ordinary lumber • Limited product warranty STRAIGHT TALK ABOUT FRAMER SERIESTM LUMBER Framer Series lumber is mechanically graded to virtually eliminate warping, and each board comes with the crown clearly marked to speed up installation. With lumber like this, framing goes up fast, crews won’t spend valuable time culling, and there’s less material waste when the job is done. Each piece of Framer Series lumber with WarpStableTM technology predicts with 95% confidence which boards will remain stable after being dried below 7% MC. It maintains a stability that is defined by the American Lumber Standards to within the #1 grade limit for bow, twist or crook. Each board is mechanically graded and WHY MAKE THE SWITCH TO FRAMER SERIES LUMBER? the crown is marked. Framer Series lumber is performance tested to meet specific strength and density requirements. Because it's more stable than commodity boards, Framer Series lumber is ideal for any non-exposed application—even those where vertical-use-only products aren’t allowed. That gives crews more flexibility at the job Here’s why— site and helps reduce the potential for red tags. • Limited product warranty Only Weyerhaeuser Framer Series lumber offers so many benefits: • Crown edge clearly marked for fast installation • Limited warranty against warping • Performs more consistently • Floors, walls, and ceilings stay flat and even than ordinary lumber • Fewer callbacks to repair drywall cracks • Helps ensure smooth, flat • Crown edge clearly marked on each board to aid typical field practice of aligning finished surfaces crowns in the framing (a double arrow indicates an undetectable crown edge).
    [Show full text]
  • Trus Joist Framer's Pocket Guide
    Framer’s Pocket Guide to the ® CONTAINS La Sécurité Avant Tout FrameWorks Building System FRAMING AVERTISSEMENT DETAILS Veuillez Lire Attentivement WARNING FOR FLOOR Les solives sont instables AND ROOF si elles ne sont pas JOISTS ARE UNSTABLE UNTIL BRACED LATERALLY contreventées et en position verticale. Voir le BRACING INCLUDES: guide d’installation avant • Blocking FEATURING la pose des solives TJI®. • Hangers TJI® 110 Ne pas circuler sur les • Strut Lines solives TJI® avant qu’elles TJI® 210 ne soient adéquatement • Sheathing DO NOT allow DO NOT stack • Rim Board ® contreventées. workers to walk on building materials TJI 230 Il est dangereux de joists until braced. • Rim Joist on unsheathed joists. déposer des matériaux de Injury may result. Stack only over TJI® 360 construction sur les beams or walls. ® solives TJI® si le sous- This guide is intended for the products shown, TJI 560 plancher n’est pas installé. in dry-use, untreated conditions. Joists IMPORTANT: Please read carefully! La Seguridad Ante Todo JOISTS ARE UNSTABLE UNTIL ADVERTENCIA BRACED LATERALLY Jobsite Storage Por Favor Lea Cuidadosamente Lack of proper bracing during construction Las viguetas son can result in serious accidents. inestables hasta que se Under normal conditions if the following guidelines refuercen lateralmente. Vea are observed, accidents will be avoided. la guía de instalaciones Store and handle joists in vertical orientation. antes de instalar las 1.Install all blocking, hangers, rim boards, and rim ® viguetas TJI®. joists at TJI joist end supports. Protect products from sun and water. No permita que los 2.Establish a permanent deck (sheathing), nailed to the first 4 feet of joists at the end of the bay or braced Wrap is slippery trabajadores caminen when wet or icy.
    [Show full text]
  • Innovative Framing Technologies Save Time and Money
    INNOVATIVE FRAMING TECHNOLOGIES SAVE TIME AND MONEY CONSTRUCT A BETTER PERFORMING HOME BY USING ENGINEERED WOOD PRODUCTS IN CRITICAL AREAS Framing is the hidden backbone of residential construction: defining the space, supporting the load, and providing the structural stability every house depends on. Tradi- tionally, this has meant heavy beams made from sawn lumber: strong but variable, subject to warping and shrinking. But an exciting revolution has been taking place, where engineered wood products combine wood’s natural strength, beauty, and versatility with precision engineering for stronger, more consistent, and more stable residential framing. Today’s wood-product technologies deliver strong, straight, and reliable framing components for builders. Products that exhibit consistent moisture content, fit precisely, and stay stable and true for a very long time. Armed with a powerful array of these framing components, savvy designers and builders are delivering high-performance homes that live up to the demands of modern residential customers, because they’re anchored by efficient framing technologies from top to bottom. INSIDE THE Wood is by nature a variable material, with knotholes, twisting, and ENGINEERED wane that varies from board to board. That variability makes for WOOD beautiful coffee tables...but in floor joists, inconsistency is the enemy. PRODUCT Framers want strength they can rely on, and beams that stay straight REVOLUTION and true every single time. To achieve that ideal, engineered wood products (EWP) are manufac- tured for specific performance characteristics important to homebuilders, including strength, stiffness, and consistency. EWP manufacturers begin by breaking logs down into smaller, more controllable components—strands and veneers that can be reassembled in innovative ways, delivering strength and stability.
    [Show full text]
  • Framing Techniques for Builders: Lessons Learned and Best Practices
    Framing Techniques for Builders: Lessons Learned and Best Practices Gary Schweizer, PE Weyerhaeuser August 29, 2017 Disclaimer: This presentation was developed by Weyerhaeuser and is not funded by WoodWorks or the Softwood Lumber Board. “The Wood Products Council” is This course is registered with AIA CES a Registered Provider with The for continuing professional education. American Institute of Architects Continuing Education Systems As such, it does not include content (AIA/CES), Provider #G516. that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of Credit(s) earned on completion handling, using, distributing, or of this course will be reported dealing in any material or product. to AIA CES for AIA members. Certificates of Completion for _______________________________________ both AIA members and non-AIA ____ members are available upon request. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. Course Description This interactive session builds on the idea that builders can improve framing techniques through the lens of others’ challenges and solutions. Recent commercial and multi-family construction hurdles related to issues with building framing schemes will be reviewed through case studies and lessons learned. Best practices that builders can employ to avoid similar issues on their own projects will be discussed, and the audience will be asked to participate and apply practices reviewed during the session. Attendees will leave prepared with design strategies to produce high-performing structures and methodologies that can be considered and applied in construction immediately.
    [Show full text]
  • Specifier Guide Includes Ajs® 140 / 20 / 25
    LIMIT STATES DESIGN CANADA SPECIFIER GUIDE INCLUDES AJS® 140 / 20 / 25 CCMC Report Number 12787-R ALLJOIST® High Performance Floor & Roof Systems ASG CANADA June 2014 2 The SIMPLE FRAMING SYSTEM® Makes Designing Homes Easier Architects, engineers, and designers trust Boise Cascade's engineered wood products to provide a better system for framing floors and roofs. It's the SIMPLE FRAMING SYSTEM®, reduced labor and materials waste are Ceilings Framed with AJS® Joists considered. There's less sorting and featuring beams, joists and rim boards The consistent size of AJS® Joists cost associ ated with disposing of waste that work together as a system, so you helps keep gypsum board flat and because you order only what you need. spend less time cutting and fitting. In free of unsightly nail pops and ugly ® Although our longer lengths help your fact, the SIMPLE FRAMING SYSTEM shadows, while keeping finish work clients get the job done faster, they cost uses fewer pieces and longer lengths to a minimum. no more. than conventional framing, so you'll ® complete jobs in less time. VERSA-LAM Beams for Floor Environmentally Sound and Roof Framing You'll Build Better Homes As an added bonus, floor and roof VERSA-STUD® and VERSA- with the systems built with AJS® Joists require ® SIMPLE FRAMING SYSTEM® LAM Columns for wall Framing about half the number of trees as those These highly-stable beams are free Now it's easier than ever to design built with dimension lumber. This helps of the large-scale defects that plague and build better floor systems.
    [Show full text]
  • Wood Utilization Survey Report and the Co-Owner of WHALE Environmental Services LLC
    HawHawaiiaii WWoodood UtilizaUtilizationtion SurSurvveyey Aspen Wood Fibers - superior silt-catching ability Source: www.curlex.com prepared for: DOFAW - Division of Forestry and Wildlife October 2017 Albizzia Re-Use Demonstration Project Source: Joseph Valenti Prepared by: WHALE Environmental Services LLC www.whalees.com Martin and MacArthur Koa Watches Source: www.martinandmacarthur.com WOOD UTILIZATION STUDY Executive Summary The purpose of this report is to provide summary of the background of wood utilization in Hawai‘i, methods used to conduct a research survey of the key interest groups in the industry, and present the data collected in the survey. As well, opportunities and challenges to the expansion of more utilization of wood products in Hawai‘i, and the priority steps needed to overcome challenges or enhance opportunities is presented. This Hawai‘i Wood Utilization Study was conducted in October 2017, with this final report issued November 19, 2017. In conducting the research, it was clear that in other states, development of the use of wood products is not seen as a diverse effort. Every state researched appeared to focus increased marketing efforts for more wood utilization to a particular use or a particular species. California for example, focuses on plywood for general wood utilization, and redwood for species promotion. Similarly, Oregon focuses on Douglas Fir wood studs to compete against steel studs citing lower costs and comparable structural strength for the usage. Maine focuses on pulp from soft pines for pulp and
    [Show full text]
  • Frame That! to the Future
    #25 SHARED SUCCESS Kealey Farmer and her publisher take on the world FR AME THAT! A Cornish framer’s biggest ever challenge BATIK TO THE FUTURE brought to you by How to frame this traditional art form EARTHTONES 4WALLSmagazine 3 [NPD ADVICE GUIDE] GOOD DAY SUNSHINE! NEW Welcome to issue 25 of 4walls magazine in-store experience for your customers – your guide to the latest news, views and and we catch up with artist Edward Waite expert advice designed to give your framing following his hugely successful exhibition in RANGES business a boost. London’s west end. In this issue we sit down with award- 4walls favourite, Mal’s Masterclass returns winning artist Kealey Farmer and her for a special one-off guide to framing batiks At Arqadia, we are committed to a product development publisher at Wishbone Art to discuss how and Mark and Sandra Loftus of The Framing programme dedicated to providing our customers with their thriving relationship is delivering Gallery in Co. Galway offer some invaluable superb designs and a wide range of quality mouldings. As impressive results. We also hear from Jon advice on using your windows to entice part of this commitment we have launched three exciting and Price in Cornwall about how renowned customers into your shop. versatile new ranges in our summer collection. artist Ric Hyde gave him the biggest framing We hope you enjoy your read! As ever, we challenge of his career. love to hear your feedback so if you have Arqadia’s Steve Burke provides a any comments or a story for 4walls, do let [OUR PLACE] OUTBACK comprehensive guide to improving the us know.
    [Show full text]
  • FRAMER SERIES™ LUMBER Structural Framing Lumber with Predictable Performance
    #LB-4020 SPECIFIER’S GUIDE FRAMER SERIES™ LUMBER Structural Framing Lumber with Predictable Performance • Computerized Grading Virtually Eliminates Warp • Comes with Crown Edge Clearly Marked • Eliminates Field Culling • Protected with a Mold Inhibitor • More Stable and Consistent than Ordinary Lumber • Limited Product Warranty WOODBYWY.COM 1.888.453.8358 STRAIGHT TALK ABOUT FRAMER SERIES™ LUMBER Weyerhaeuser’s Framer Series™ lumber is mechanically graded to virtually eliminate warping, and each board comes with the crown clearly marked to speed up installation. With lumber like this, framing goes up fast, crews won’t spend valuable time culling, and there’s less material waste when the job is done. Each piece of Framer Series™ lumber is performance tested to meet specific strength and density requirements. Because it's more stable than commodity boards, Framer Series™ lumber is ideal for any application—even those where vertical-use-only products aren’t allowed. That gives crews more flexibility at the job site and helps reduce the potential for red tags. Only Framer Series™ Lumber offers so many benefits: • Limited warranty against warping • Floors, walls, and ceilings stay flat and even • Fewer callbacks to repair drywall cracks • Crown edge clearly marked on each board • Full lateral shear wall capacities—no species reduction needed • Meets or exceeds all building code requirements for framing lumber • Mold inhibitor helps material stay clean and bright, reducing product loss and callbacks WHY MAKE THE SWITCH TO FRAMER SERIES™ LUMBER?
    [Show full text]
  • BC Framer® Brochure for Dealers and Distributors
    BC FRAMER® JUST GOT A LOT MORE PRODUCTIVE: INTRODUCING NEXT-GENERATION BC FRAMER® FOR DEALERS AND DISTRIBUTORS. FOR THE BUSINESS OF ENGINEERED WOOD PRODUCTS™ SUPERCHARGE YOUR DESIGN DEPARTMENT WITH NEW BC FRAMER® New BC FRAMER® represents a huge technological productivity than even our old version of BC FRAMER®. leap to help you improve the efficiency and profitability This new software package will help your design of your engineered wood products business. Boise department work faster and accomplish more. You Cascade will provide you what we believe is now the don’t get paid to do drawings, but at least now you industry’s best design software, offering far greater can do them in less time, and better. TAKE ADVANTAGE OF NEW SOFTWARE DESIGN EFFICIENCIES: MiTek® SAPPHIRE™ software provides the technology Cascade’s highly successful BC FRAMER® integrated behind this outstanding new platform. Boise Cascade analysis software. Through file exchange, BC FRAMER® has teamed with MiTek to leverage the high performance users will be able to share 3-D model files with SAPPHIRE Structure platform, a true industry standard. MiTek SAPPHIRE users. Our software will be an all-new version of Boise SHRINK DESIGN TIME WITH BC FRAMER® MODEL SHARING: • Floor/EWP designers can now share files with wall and roof designers and others. • Design faster by integrating work input by other software users. SAVE TIME & PREVENT MISTAKES WITH BEST-IN-INDUSTRY FILE INTEGRATION: • Open architecture supports Boise Cascade’s ability to work with you, the customer. • Can import from or export to SAPPHIRE Structure. • Import files directly from Cadsoft®, SoftPlan® and Autodesk Revit®.
    [Show full text]
  • Spring 2013 the Newsletter for the Professional Builder
    www.delumber.com Spring 2013 The Newsletter for the Professional Builder BUILDING BUDGETS As current Lumber and Panel prices continue the rise to the top of their Historical Levels, it is extremely important to review your Budgeting Forecasts and current purchasing and operational activities, which ultimately will affect your present and future profitability. Our June PROLINES market forecast of 2012 accurately predicted the situation we face at this time; however now that it has arrived, what can we do about it? With every challenge, there comes opportunity. Many years ago when Oriented Strand Board was just being introduced, it sold at a significant discount to Plywood and in most cases it was extremely difficult to get our builder partners to convert over to Strand Board. Today, Strand Board is the accepted standard for floor, wall and roof sheathing; however at this point we could actually offer you Canadian Softwood Plywood (Spruce Sheathing) at a discounted level to OSB. Of course this would only be of interest to builders who would like to reduce the sheathing costs by several hundred dollars per house. Many volume house builders have expressed difficulty in switching products when constructing pre-sold houses, side by side or in the same neighborhood, as their clients believe that they are being short changed in some way or are receiving an inferior product. Perhaps these Builders should take this opportunity to review the “SPECIFICATIONS” for their houses and change the wall or roof sheathing specification from “Oriented Strand Board” to “Wood Based Structural Panel” as accepted by the Alberta Building Code.
    [Show full text]