Vmebus Modules

VMEbus Modules

Data Sheets of TEWS’ VMEbus Modules

TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

About TEWS TECHNOLOGIES Software support

Software support is a critical and defining TEWS TECHNOLOGIES is a leading component of the TEWS’ I/O product solutions provider of embedded I/O and offering. Our modular hardware designs CPU products based on open are coupled with extensive software architecture standards such as PMC, drivers and support for most major real- XMC, IndustryPack® (IP), CompactPCI, time and server operating systems such standard PCI, PCIe, VME, AMC, and as VxWorks, Windows, Integrity, Linux, FMC. LynxOS, and QNX. Supported CPU architectures are Intel, PowerPC and 68k TEWS has more than 40 years of (for IndustryPack only). experience designing and building turn- key embedded interface solutions using For IndustryPack carriers and modules, the philosophy to listen and respond to TEWS has developed a layered driver our customers’ needs. concept that includes both a carrier driver layer and an IP module driver layer. Using this ‘customer first’ approach, TEWS has developed a large number of All TEWS’ IndustryPack carriers are standard and custom products for supported directly by the carrier driver, applications in industrial control, and a generic driver is included for telecommunication infrastructure, medical integration of third party products. equipment, traffic control and COTS. A key element of our software is our support staff. All TEWS’ support TEWS’ line of embedded I/O solutions is engineers are professionally trained to available worldwide through a global ensure in-depth support for software network of distributors. drivers and integration.

Quality Assurance / Warranty RoHS / WEEE Compliance

TEWS operates three subsidiaries to TEWS TECHNOLOGIES believes in meet global demand for pre and post conducting business in a manner that sales support, reduced development respects the environment and time, long term product availability, and consequently has embraced the RoHS complete product lifecycle management. regulations of the European Community.

Non-compliant products will continue to TEWS is committed to continuously be available for all applications which are improving the quality of our products and exempt from the RoHS directives and services. As a reflection of our have a continuing requirement for leaded commitment to quality, TEWS has solder. implemented and received ISO9001:2008 certification.

All TEWS’ products feature a five-year limited warranty.

VMEbus Modules

VMEbus technology is well-established for solutions, we offer VME IndustryPack industrial applications and automation carriers, VME PowerPC CPU designs, and technology with high-security standards, general VME-based industrial I/O solutions. infinite processor performance requirements, TEWS is committed to long-term support of and real-time capability. A wide range of the VMEbus, and will continue to announce technical and commercial aspects have VME products in the near future. contributed to the unique success of the If you wish to inquire about custom VME VMEbus concept. Among these aspects is designs, please contact TEWS directly at our the international open standard nature of offices in Germany or the United States. VME, a mechanical structure based on TEWS works closely with OEM and classic 19-inch rackmount concepts, a choice government customers to deliver accelerated of 3U and 6U Eurocard sizing, a wide range time to market, long-term product availability of COTS (commercial off-the-shelf) products, and comprehensive product lifecycle a wide vendor base, and continued management -- from the design stage improvement to the VME standard. through manufacturing, testing and beyond to After more than two decades on the market, post-sales support. VMEbus has become a proven and reliable In addition to our well known IP modules, we industry standard for many industrial and offer a complete line of PCI, PCIe, Compact communications applications. PCI, XMC, AMC, FMC, and numerous PMC Since 1985, TEWS TECHNOLOGIES has modules off-the-shelf. offered VME products. At that time, TEWS All TEWS modules feature a five-year limited recognized the need for a standard I/O warranty, and many are offered standard in product offering, and with Motorola's backing extended temperature (-40°C to +85°C). of the bus architecture, VME was the natural Software drivers for VxWorks, LynxOS, Linux, choice. Our experience in the modular I/O QNX, Integrity and Windows are available. market grew from our work with VME. In For more information go to www.tews.com. addition to our well known modular I/O

The Embedded I/O Company TVME200 VMEbus Carrier for 4 IndustryPacks®

Application Information Technical Information The TVME200 is 6U VMEbus Carrier for up to 4 single-  Form Factor: VMEbus Board, 6U size or 2 double-size IndustryPack (IP) modules used to  VMEbus Slave Interface: build modular, flexible and cost effective I/O solutions for  Short I/O: A16, D08/16, size: 1 Kbyte applications in process control, medical systems,  Standard memory: A24, D08/16 telecommunication and traffic control.  Size: programmable, 32 Kbytes to 2 Mbytes A set of 16-position rotary switches allows easy per IP configuration of VME Short I/O and Memory addresses.  Extended memory: A32, D08/16 Interrupt routing from the IP slots to the VME IRQ’s can be  Size: fixed, 8 Mbytes per IP done in two ways: programmable by software or selection  Interrupts: IRQ1-7 of predefined sets by a rotary switch.  ANSI/VITA 4-1995 compliant interface to Four 50 pin 0.1 inch flat ribbon cable connectors mounted IndustryPack modules in the front panel of the TVME200 provide access to all IP  IndustryPack slots: Four single-size or two I/O lines. Additional, on the TVME200-20R all I/O lines of double-size with front panel I/O ‘IP D’ are routed to VME P2 and 14 user selectable I/O  8 MHz interface, no DMA lines of ‘IP C’ can be routed to VME P2 via a jumper field.  Routing of IP interrupt levels to VME IRQ1-7: Status indicators for IP access, +5V and +/-12V are programmable by software or selection of provided. predefined sets by a rotary switch The IP power lines are fuse protected by self healing fuses  I/O access: 50 pin 0.1 inch flat ribbon cable and RF filtered. The operating temperature ranges connector per IP mounted in front panel between -40°C and +85°C.  Rear I/O of ‘IP C’ and ‘IP D’ (TVME200-20R only)  Status LED’s  ACK LED for each IP module  +5V Power LED for each IP slot  +12V and –12V Power LED  Self healing fuses and RF-filtering on all IP power lines  Operating temperature –40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.1.0 All trademarks mentioned are property of their respective owners. 2013-11-18 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company

Order Information RoHS Compliant TVME200-10R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version) TVME200-20R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version), P2-I/O for IP-C/D

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME200-DOC User Manual

Software CARRIER-SW-25 Integrity Software Support CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-72 LynxOS IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support

For other operating systems please contact TEWS.

Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector

The Embedded I/O Company TVME201 VMEbus Carrier for 4 IndustryPacks®

Application Information Technical Information The TVME201 is 6U VMEbus Carrier for up to four single-  Form Factor: VMEbus board, 6U size or two double-size IndustryPack (IP) modules  VMEbus slave interface: allowing to build up modular, flexible and cost effective I/O  Short I/O: A16, D08/16, size: 1 Kbytes solutions for all kinds of applications like process control,  Standard Memory: A24, D08/16, medical systems, telecommunication and traffic control. Size: programmable, 32 Kbytes to 2 Mbytes per For improved EMI protection, four HD50 SCSI-2 type IP connectors are mounted in the EMI front panel of the  Extended Memory: A32, D08/16, TVME201 and provide access to all IP I/O lines. Status Size: fixed, 8 Mbytes per IP indicators for IP access, +5V and +/-12V are provided in  Interrupts: IRQ1-7 the front panel.  ANSI/VITA 4-1995 compliant interface to A set of 16-position rotary switches allows easy IndustryPack modules configuration of VME Short I/O and Memory addresses.  IndustryPack slots: Four single-size or two Interrupt routing from the IP slots to the VME IRQ’s can be double-size with front panel I/O done in two ways: programmable by software or selection  8 MHz interface, no DMA of predefined sets by a rotary switch.  Routing of IP Interrupt Levels to VME IRQ1-7: The IP power lines are fuse protected by self healing fuses programmable by software or selection of and RF filtered. The operating temperature ranges predefined sets by a rotary switch between -40°C and +85°C.  I/O access by HD50 SCSI-2 type connector per IP mounted in EMI front panel  EMI front panel  Status LED’s  ACK LED for each IP module  +5V Power LED for each IP slot  +12V and –12V Power LED  Self Healing fuses and RF-filtering on all IP power lines  Operating Temperature –40°C to +85°C TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.1.0 All trademarks mentioned are property of their respective owners. 2013-11-18 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company

Order Information RoHS Compliant TVME201-10R 6U 4 Slot IndustryPack Carrier, HD50 connectors

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME201-DOC User Manual

For other operating systems please contact TEWS.

Related Products TA301 Cable Kit for Modules with HD50 Connector

The Embedded I/O Company TVME202 VMEbus Carrier for 4 IndustryPacks®

Application Information Technical Information The TVME202 is 6U VMEbus Carrier for up to 4 single-  Form Factor: VMEbus Board, 6U size or 2 double-size IndustryPack (IP) modules provides  VMEbus Slave Interface: modular, flexible and cost effective I/O solutions for  Short I/O: A16, D08/16, size: 1 Kbyte applications in process control, medical systems,  Standard memory: A24, D08/16 telecommunication and traffic control.  Size: programmable, 32 Kbytes to 2 Mbytes A set of 16-position rotary switches allows easy per IP configuration of VME Short I/O and Memory addresses.  Extended memory: A32, D08/16 Interrupt routing from the IP slots to the VME IRQ’s is  Size: fixed, 8 Mbytes per IP programmable by software or can be selected from  Interrupts: IRQ1-7 predefined sets by a rotary switch.  ANSI/VITA 4-1995 compliant interface to Four 50 pin 0.1 inch flat ribbon cable connectors mounted IndustryPack modules on the TVME202 provide front I/O access to all IP I/O  IndustryPack slots: Four single-size or two lines. double-size with front panel I/O Status indicators for IP access, +5V and +/-12V are  8 MHz interface, no DMA provided.  Routing of IP interrupt levels to VME IRQ1-7: The IP power lines are fuse protected by self healing fuses programmable by software or selection of and RF filtered. The operating temperature ranges predefined sets by a rotary switch between -40°C and +85°C.  I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP  Status LED’s  ACK LED for each IP module  +5V Power LED for each IP slot  +12V and –12V Power LED  Self healing fuses and RF-filtering on all IP power lines  Operating temperature –40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-18 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company

Order Information RoHS Compliant TVME202-10R 6U 4 Slot IndustryPack Carrier, 50pin 180° ribbon cable connectors

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME202-DOC User Manual

For other operating systems please contact TEWS.

Related Products TA305 Cable Kit for Modules with 50 pin Ribbon Cable Connector

The Embedded I/O Company TVME210 VMEbus Carrier for 2 IndustryPacks®

TVME210-10R

TVME210-11R

Application Information Technical Information The TVME210 is a 3U VMEbus Carrier for up to two  Form Factor: VMEbus board, 3U single-size or one double-size IndustryPack (IP) modules  VMEbus Slave Interface: allowing to build up modular, flexible and cost effective I/O  Short I/O: A16, D08/16, size: 512 bytes solutions for all kinds of applications like process control,  Standard Memory: A24, D08/16 medical systems, telecommunication and traffic control.  Size: programmable, 32 Kbytes to 4 Mbytes per Two 50 pin 0.1 inch flat ribbon cable connectors mounted IP or 2 Mbytes to 8 Mbytes for one IP in the front panel of the TVME210 provide access to all IP  Interrupts: IRQ1-7 I/O lines. Status indicators for IP access, +5V and +/-12V  ANSI/VITA 4-1995 compliant interface to are provided. IndustryPack modules A set of 16-position rotary switches allows easy  IndustryPack slots: Two single-size or one configuration of VME Short I/O and Memory addresses. double-size with front panel I/O Interrupt routing from the IP slots to the VME IRQ’s can be  8 MHz interface, no DMA done in two ways: programmable by software or selection  Routing of IP Interrupt Levels to VME IRQ1-7: of predefined sets by a rotary switch. programmable by software or selection of The IP power lines are fuse protected by self healing fuses predefined sets by a rotary switch and RF filtered. The operating temperature range is -40°C  I/O access: 50 pin 0.1 inch flat ribbon cable and +85°C. connector (1x90°, 1x180°) per IP mounted in front panel  Status LED’s  ACK LED for each IP module  +5V Power LED for each IP slot  +12V and –12V Power LED  Self Healing fuses and RF-filtering on all IP power lines  Operating Temperature –40°C to +85°C

The Embedded I/O Company

Order Information RoHS Compliant TVME210-10R 3U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors TVME210-11R 6U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME210-DOC User Manual

For other operating systems please contact TEWS.

Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector

The Embedded I/O Company TVME211 VMEbus Carrier for 2 IndustryPacks®

Application Information Technical Information The TVME211 is a 3U VMEbus Carrier for up to two  Form Factor: VMEbus board, 3U single- size or one double-size IndustryPack (IP) modules  VMEbus Slave Interface: allowing to build up modular, flexible and cost effective I/O  Short I/O: A16, D08/16, size: 512 bytes solutions for all kinds of applications like process control,  Standard Memory: A24, D08/16, medical systems, telecommunication and traffic control. Size: programmable, 32 Kbytes to 4 Mbytes per Two 50 pin 0.1 inch flat ribbon cable connectors mounted IP or 2 Mbytes to 8 Mbytes for one IP in the front panel of the TVME211 provide access to all IP  Interrupts: IRQ1-7 I/O lines.  ANSI/VITA 4-1995 compliant interface to A set of 16-position rotary switches allows easy IndustryPack modules configuration of VME Short I/O and Memory addresses.  IndustryPack slots: Two single-size or one Interrupt routing from the IP slots to the VME IRQ’s can be double-size with front panel I/O done in two ways: programmable by software or selection  8 MHz interface, no DMA of predefined sets by a rotary switch.  Routing of IP Interrupt Levels to VME IRQ1-7: The IP power lines are fuse protected by self healing fuses programmable by software or selection of and RF filtered. The operating temperature range is -40°C predefined sets by a rotary switch and +85°C.  I/O access: 50 pin 0.1 inch flat ribbon cable connector (stacked version) per IP mounted in front panel  Self Healing fuses and RF-filtering on all IP power lines  Operating temperature –40°C to +85°C

The Embedded I/O Company

Order Information RoHS Compliant TVME211-10R 3U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors (stacked version) TVME211-11R 6U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors (stacked version)

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME211-DOC User Manual

For other operating systems please contact TEWS.

Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector

The Embedded I/O Company TVME220 VME64x Carrier for 4 IndustryPacks®

Application Information Technical Information The TVME220 is a 6U VMEbus carrier for up to 4 single-  Form Factor: VME64x-Board, 6U size or two double-size IndustryPack (IP) modules used to  VME64 (ANSI/VITA 1-1994) and VME64x (ANSI/VITA build modular, flexible and cost effective I/O solutions for 1.1-1997) compliant Slave Interface applications in process control, medical systems,  Short I/O: A16, D08/16, size: 1 Kbytes telecommunication and traffic control.  Standard Memory: A24, D08/16 The TVME220 uses VME64x-compliant connectors to  Size: 32 Kbytes to 2 Mbytes per IP increase the quantity of rear I/O connectivity beyond that  Extended Memory: A32, D08/16 of standard VME. All of the 200 I/O lines from the 4 IP  Size: fixed, 8 Mbytes per IP slots are available at the VME64x connectors P0 and P2.  Interrupts: IRQ1-7 The I/O mapping is compliant to the ANSI/VITA 4.1-1996  ANSI/VITA 4-1995 compliant interface to standard. IndustryPack modules Although the rear connectors are VME64x, the electrical  IndustryPack slots: Four single-size or two interface is standard VME, so that nearly all CPU products double-size with back I/O via P0 and P2 still have full access to the IP modules mounted on the  8 MHz interface, no DMA TVME220.  Routing of IP Interrupt Levels to VME IRQ1-7: Status indicators for IP access, +5V and +/-12V are pro- programmable by software or selection of vided in the EMI shielded front panel. predefined sets by a rotary switch A set of 16-position rotary switches allows easy configura-  ANSI/VITA 4.1-1996 compliant mapping of IP I/O tion of VME Short I/O and memory addresses. Interrupt lines to VME64x connectors P0 and P2 routing from the IP slots to the VME IRQ’s can be done in  Status LED’s: two ways: programmable by software or selection of  ACK LED for each IP module predefined sets by a rotary switch.  +5V Power LED for each IP slot The IP power lines are fuse protected by self healing fuses  +12V and –12V Power LED and RF filtered. The operating temperature ranges  Self Healing fuses and RF-filtering on all IP power between -40°C and +85°C. lines TEWS two Transition Modules, TVME001-TM and  Operating temperature –40°C to +85°C TVME002-TM are available for easy access to all IP I/O lines.

The Embedded I/O Company

Order Information RoHS Compliant TVME220-10R 6U 4 Slot IndustryPack Carrier, VME64x I/O on P0 and P2

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME220-DOC User Manual

For other operating systems please contact TEWS.

Related Products TVME001-TM 6U Transition Module for VME64x IndustryPack Carrier, 50pin 180° ribbon cable connectors TVME002-TM 6U Transition Module for VME64x IndustryPack Carrier, HD50 connectors

The Embedded I/O Company TVME230 PCI Expansion Card for 4 IndustryPack®

Application Information Technical Information The TVME230 is a 6U Expansion Card for VMEbus CPU’s  Form Factor: VMEbus board, 6U with a PCI Expansion Connector like the TVME8240A,  Board size: 160 mm x 233.35 mm TVME8300, TVME8400, MVME5500, MVME5100,  PCI 2.2 compliant interface MVME3100, MVME2300 or MVME2400. It provides  PCI Interface : 33 MHz; 32 bit access to four single-size or two double-size IndustryPack  5V and 3.3V PCI I/O signaling voltage (IP) modules via the PCI Expansion Connector. This adds  ANSI/VITA 4-1995 compliant interface to 200 additional I/O lines to the CPU, used to build modular, IndustryPack modules flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and  IndustryPack slots: 4 single-size or 2 double-size traffic control.  IP Power: +5V, +12V and -12V are taken from the VMEbus backplane For improved EMI protection, four HD50 SCSI-2 type  8/32 MHz interface, no DMA connectors are mounted in the EMI front panel of the TVME230 and provide access to all IP I/O lines. Status  8 MByte memory space per IP indicators for IP access, +5V and +/-12V are provided in  Routing of all IP interrupts to PCI INTA, local the front panel. interrupt status register  I/O access: HD50 SCSI-2 type connector per IP, As an order option, the TVME230 is available with front panel I/O standard VME handles or IEEE1101 handles.  Status LED’s The TVME230 can operate with 3.3V and 5.0V PCI I/O  ACK LED for each IP module signaling voltage.  +5V Power LED for each IP slot All IP interrupt request lines are mapped to PCI INTA. For  +12V and –12V Power LED fast interrupt source detection, the TVME230 provides a  Self Healing fuses and RF-filtering on all IP power special IP interrupt status register. lines The IP power lines are fuse protected by self healing fuses  Operating temperature -40°C to +85°C and RF filtered. The operating temperature range is -40°C to +85°C.

The Embedded I/O Company

Order Information RoHS Compliant TVME230-10R 6U 4 Slot IndustryPack Expansion Card for VMEbus CPU's, IEEE1101 Handles TVME230-11R 6U 4 Slot IndustryPack Expansion Card for VMEbus CPU's, standard handles

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME230-DOC User Manual

For other operating systems please contact TEWS.

Related Products TA301 Cable Kit for Modules with HD50 Connector

The Embedded I/O Company

TVME001-TM Transition Module for VME64x Back I/O

Application Information Technical Information The TVME001-TM is a Transition Module for use with  Form Factor: VME64x Rear Transition Module VME64x backplanes, providing easy and concise access  I/O Routing: to the I/O lines of back I/O IP carriers.  ANSI/VITA 4.1-1996 compliant I/O mapping (P0 It brings all 200 IP I/O lines from the VME64x P0 and P2 and P2) connectors out to four 50 pin ribbon cable connectors. The  I/O lines are accessible via four 50 pin ribbon routing between the VME64x P0 and P2 connectors and cable connectors the 4 ribbon cable connectors is ANSI/VITA 4.1-1996  No front panel compliant.  Operating temperature: -40°C to +85°C The operating temperature ranges is -40°C and +85°C.

Order Information

RoHS Compliant TVME001-TM-10R 6U Transition Module for VME64x IndustryPack Carrier, 50pin 180° ribbon cable connectors

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME001-TM-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-27 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TVME002-TM Transition Module for VME64x Back I/O

Application Information The TVME002-TM is an 80mm, 6U Transition Module for use with VME64x backplanes, providing easy access to the I/O lines of back I/O IP carriers.

It brings all 200 IP I/O lines from the VME64x P0 and P2 connectors out to four 50 pin SCSI-2 type connectors located in the EMI front panel. The routing between the VME64x P0 and P2 connectors and the 4 HD50 SCSI-2 type connectors in the EMI front panel is ANSI/VITA 4.1-1996 compliant.

Technical Information Form Factor: VME64x 6U Rear Transition Module I/O Routing: ANSI/VITA 4.1-1996 compliant I/O mapping (P0 and P2) I/O lines are accessible via four HD50 SCSI-2 type connectors EMI front panel Operating temperature: -40°C to +85°C

The operating temperature ranges between -40°C Order Information and +85°C. TVME002-TM-10R 80mm, 6U Transition Module, I/0 lines accessible via four HD50 SCSI-2 type connectors mounted in EMI front panel TVME002-TM-10 None RoHS compliant version of TVME002-TM-10R

TVME002-TM-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. 09/2009 IAll trademarks mentioned are property of their respective owners. TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company

TVME020-TM VME64x Rear I/O PIM Carrier

Application Information Technical Information The TVME020-TM is a VME64x Rear I/O 2 Slot PIM  Form Factor: 6U VME64x Rear I/O Transition Module Carrier Transition Module to be used with 6U VME64x (233 mm x 80 mm) PMC carrier boards.  2 PIM Slots The TVME020-TM conforms to the ANSI/VITA 35-2000  ANSI/VITA 35-2000 PMC to VME-P2/VME64x-P2 I/O PMC to VME-P2/VME64x-P2 I/O mapping. mapping supported According to the ANSI/VITA 35-2000 PMC to VME-  PIM slots: P2/VME64x-P2 I/O mapping, there are 64 I/O signals for • 64 PMC1 I/O lines on PIM slot 1 PMC1 available at VME-P2/VME64x-P2 connector rows a • 46 PMC2 I/O lines on PIM slot 2 + c, and 46 I/O signals for PMC2 available at VME64x-P2 • +5V and +3.3V power supply at the PIM slots connector rows z + d.  EMI front panel With the TVME020-TM all the 64 PMC1 I/O lines are  Operating temperature: -40°C to +85°C available at PIM slot 1, and all the 46 PMC2 I/O lines are available at PIM slot 2. The operating temperature range is -40°C to +85°C.

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-27 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company

Order Information

RoHS Compliant TVME020-TM-10R 6U Transition Module for VME64x PMC Carrier, 2 PIM Slots

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TVME020-TM-DOC User Manual

Related Product TPIM001 PIM I/O Module with HD50 SCSI-2 type connector TPIM002 PIM I/O Module with HD68 SCSI-3 type connector TPIM003 PIM I/O Module with HD68 SCSI-3 type connector, special pin assignment TPIM005 PIM I/O Module with HD68 SCSI-3 type connector for TPMC863/TPMC363

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-27 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TPIM001 PIM I/O Module with 50 pin Connector

Application Information Technical Information The TPIM001 is a standard single-width PIM I/O  Standard single-width PIM I/O Module module to be used with any PIM carrier. It offers  Board size: 69 mm x 74 mm easy access to the PMC back I/O lines of PMC  I/O lines 1 to 50 are routed to a HD50 SCSI-2 carrier with back I/O. type connector in the front panel The TPIM001 distributes the lower 50 I/O lines of the  EMI Front Panel PMC to a standard 50 pin SCSI-2 type connector  Operating Temperature: -40°C to +85°C located in the EMI front panel. The operating temperature range is -40°C to +85°C.

Order Information

RoHS Compliant TPIM001-10R PIM I/O Module, HD50 connector

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TPIM001-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-28 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TPIM002 PIM I/O Module with 68 pin Connector

Application Information Technical Information The TPIM002 is a standard single-width PIM I/O  Standard single-width PIM I/O Module module to be used with any PIM carrier. It offers  Board size: 69 mm x 74 mm easy access to the PMC back I/O lines of PMC  I/O lines are routed to a HD68 SCSI-3 type carrier with back I/O. connector in the front panel The TPIM002 distributes all PMC back I/O lines to a  EMI Front Panel 68 pin SCSI-3 type connector located in the EMI  Operating Temperature: -40°C to +85°C front panel. The operating temperature range is -40°C to +85°C.

Order Information

RoHS Compliant TPIM002-10R PIM I/O Module, HD68 connector

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TPIM002-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-28 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TPIM003 PIM I/O Module with 68 pin Connector

Application Information Technical Information The TPIM003 is a standard single-width PIM I/O module to  Standard single-width PIM I/O Module be used with any PIM Carrier like TEWS’ TCP020-TM,  Board size: 69 mm x 74 mm TVME020-TM or others. It offers easy access to the PMC  I/O lines are routed to a HD68 SCSI-3 type back I/O lines of PMC carriers with back I/O like TEWS’ TCP260 or TVME8400. connector in the front panel  EMI Front Panel The TPIM003 distributes all 64 PMC back I/O lines to a 68 pin SCSI-3 type connector located in the EMI front panel.  Operating Temperature: -40°C to +85°C Additional GND pins are inserted by solder jumpers at pin 9, 26, 43 and 60 of the 68 pin SCSI-3 type connector. The routing and I/O signal mapping of the TPIM003 is optimized for differential pair routing. The TPIM003 recreates the PMC front I/O signal mapping in its 68 pin SCSI-3 type connector when used with e.g. the TPMC460, TPMC630 or TPMC868. Refer to the TPMC Data Sheets to find out if the TPIM003 recreates the PMC front I/O signal mapping in its 68 pin SCSI-3 type connector. The operating temperature is -40°C to +85°C.

Order Information

RoHS Compliant TPIM003-10R PIM I/O Module, HD68 connector, special pin assignment

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TPIM003-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-28 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TPIM005 PIM I/O Module with 68 pin Connector

Application Information Technical Information The TPIM005 is a standard single-width PIM I/O module to  Standard single-width PIM I/O Module be used with any PIM Carrier like TEWS’ TCP020-TM-  Board size: 69 mm x 74 mm 10R, TVME020-TM-10R or others. It offers easy access to  I/O lines are routed to a HD68 SCSI-3 type connector the PMC back I/O lines of PMC carriers with back I/O like in the front panel TEWS TCP260 or TVME8400.  EMI Front Panel The TPIM005 distributes all 64 PMC back I/O lines to a 68  Operating Temperature: -40°C to +85°C pin SCSI-3 type connector located in the EMI front panel. The routing and I/O signal mapping of the TPIM005 is optimized for differential pair routing. The TPIM005 recreates the PMC front I/O signal mapping in its 68 pin SCSI-3 type connector when used with the TPMC862/TPMC863 or TPMC362 /TPMC363. Refer to the TPMC Data Sheet to find out if the TPIM005 recreates the PMC front I/O signal mapping in its 68 pin SCSI-3 type connector. The operating temperature is -40°C to +85°C.

Order Information

RoHS Compliant TPIM005-10R PIM I/O Module, HD68 connector, for TPMC863/TPMC363

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TPIM005-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-28 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

The Embedded I/O Company TPIM006 PIM I/O Module for Gigabit Ethernet PMCs

Application Information Technical Information The TPIM006 is a standard single-width PIM I/O module to  Form Factor: Standard single-width PIM I/O module be used with any PIM carrier like TEWS’ TCP020, conforming to VITA 36 – 199X Draft 0.1 TVME020 or others. It offers easy access to the PMC  Board size: 69 mm x 74 mm back I/O lines of PMC carriers like TEWS' TCP260 or  I/O lines routed to RJ45 connectors in the front panel TVME8400.  EMI Front Panel The TPIM006 distributes the Ethernet signals of the  Operating temperature: -40°C to +85°C TEWS' Gigabit Ethernet modules with back I/O to RJ-45  MTBF (MIL-HDBK217F/FN2 GB 20°C) connectors located in the front panel of the PIM module. TPIM006-10R: 758081 h The TPIM006 reproduces the front I/O signal mapping of TEWS four channel 10/100/1000 Mbit/s Ethernet adapter PMCs in its RJ-45 connectors when used with the TPMC885-11R or TPMC385-10R for example. The operating temperature is -40°C to +85°C.

Order Information

RoHS Compliant TPIM006-10R PIM I/O Module for Quad 10/100/1000 Ethernet PMC

For the availability of non-RoHS compliant (leaded solder) products please contact TEWS.

Documentation TPIM006-DOC User Manual

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. Issue 1.0.0 All trademarks mentioned are property of their respective owners. 2013-11-28 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com