Kennedy Valve A Division of McWane, Inc.

AWWA PRODUCTS

1021 East Water Street Elmira, NY 14902 Phone: (607)734-2211 Fax: (607)734-3288 Fax: (800)952-4771 E-Mail: [email protected] www.kennedyvalve.com

PRICE LIST: WW 021012 EFFECTIVE DATE: February 10, 2012 TERMS AND CONDITIONS

These prices supersede and cancel all previous prices for these products. Prices and designs are subject to change without notice.

All material will be invoiced at prices in effect on the date of shipment unless a prior written agreement is in effect.

All contracts, orders or agreements are subject to approval by the Kennedy Valve office in Elmira, New York.

All orders once entered; are subject to a 25% cancellation charge, and are subject to increased charges depending on the status and type of material ordered.

Payment terms are as follows: freight allowed in the USA, except Alaska or Hawaii, on orders of 20,000 pounds or more, on orders of 5,000 – 19,999, freight allowed with next truck into the area. Orders of less than 5,000 will be prepay and add. NO FREIGHT ALLOWANCE ON ORDERS FOR PARTS. Kennedy reserves the right to determine routing.

Invoice Dates Terms

1st thru 15th 2%, 30th of that month; net 15th of the following month 16th thru 31st 2%, 15th of the following month; net 30th of the following month

Further, a 1 ½% penalty will be applied to all invoices over 30 days past due.

The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be added to the purchase price, and shall be paid by Buyer unless Buyer provides Kennedy with the exemption certificate acceptance to the taxing authorities.

TERMS AND CONDITIONS CONT.

All shipments are carefully examined, counted, and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages or errors in shipment will be allowed unless made in writing within five (5) days of receipt of shipment. For other than truckload shipments, claims for products damaged or lost in transit should be on the carrier, as Kennedy’s responsibility ceases, and title passes, on delivery to the carrier.

Shipments to customers shall be at all times subject to the approval of the Kennedy Valve Credit Department.

Schedules of deliveries are estimates only, and do not constitute a guarantee that shipment will be made with the time given. Product offered from stock is subject to prior sale. Kennedy will make every effort to complete delivery of products as ordered, but Kennedy assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accidents, delay of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Kennedy. Kennedy may terminate any contract of sale of its products without liability of any nature, by written notice to the Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Kennedy be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

A MATERIAL RETURN AUTHORIZATION (MRA Number) must be obtained from Kennedy Valve, Elmira, New York BEFORE any product is returned for credit. Material returned must be in a saleable condition. Outbound and inbound freight, reconditioning charges, and a 25% handling charge will be deducted from all credits. Material returned for credit must have been purchased within the preceding 12 month period and must be accompanied by our invoice number and date. Return material must exceed $1,000 minimum value. LIMITED WARRANTY

Kennedy Valve warrants that the goods furnished hereunder, will be free from defects in material and workmanship, and will operate freely without failure or leakage under the service conditions they were installed under.

If within one (1) year from date of initial operation, but not more than eighteen (18) months from date of shipment by Kennedy Valve of any item of product(s), the purchaser discovers that such item(s) was not as warranted above, notifies Kennedy Valve in writing within 30 days from date purchaser discovered; or should have discovered, then Kennedy Valve shall remedy such nonconformance by, at Kennedy Valve’s option, adjustment or repair or replacement of the item and any affected part of the product(s) within 30 days of such notice. Purchaser shall assume all responsibility and expense for removal, reinstallation and freight in connection with the foregoing remedies.

Kennedy Valve shall not be liable for incidental or consequential losses, damages, or expenses, directly or indirectly arising from the sale, handling or use of the goods, of from any other cause relating thereto, and Kennedy Valve’s liability hereunder in any case is expressly limited to replacement (in the form originally shipped) of goods not complying with this agreement, or, at Kennedy Valve’s election, to the replacement of, or crediting Purchaser with, an amount equal to the purchase price of such goods whether such claims are for breech of warranty or negligence.

Kennedy Valve reserves the right to change material composition without prior notice as long as it meets applicable standards.

TEN YEAR LIMITED WARRANTY ON KENNEDY K81A & D GUARDIAN FIRE HYDRANT

Kennedy Valve Company warrants that its Kennedy Guardian Fire Hydrant will be free from defects in material and workmanship under normal and customary use and maintenance for a period of ten (10) years from the date of purchase, provided the hydrant is installed and maintained according to Kennedy Valve instructions, and applicable codes. The foregoing warranty does not cover failure of any part or parts from external forces, including but not limited to earthquakes, vandalism, vehicular or other impact, application of excessive torque to the operating mechanism or frost heave.

Should any Kennedy Valve Company part or parts fail to conform to the foregoing warranty, Kennedy Valve shall, upon prompt written notice thereof, repair or replace, F.O.B. point of manufacture, such defective part or parts. Purchaser shall, if requested, return the part or parts to Kennedy Valve, transportation prepaid. Purchaser shall bear all responsibility and expense incurred for removal, reinstallation and shipping in connection with any part supplied under the foregoing warranty.

THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR FITNESS. IN NO EVENT SHALL KENNEDY VALVE COMPANY BE RESPONSIBLE OR LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSSES, DAMAGES, OR EXPENSES.

TEN YEAR LIMITED WARRANTY ON KENNEDY VALVE RESILIENT WEDGE VALVES

Kennedy Valve Company warrants that its Resilient Wedge valves will be free from defects in material and workmanship under normal and customary use and maintenance for a period of ten (10) years from the date of purchase, provided the valve is installed and maintained according to Kennedy Valve instructions, and applicable codes. The foregoing warranty does not cover failure of any part or parts from external forces, including but not limited to earthquakes, vandalism, vehicular or other impact, application of excessive torque to the operating mechanism or frost heave.

Should any Kennedy Valve Company part or parts fail to conform to the foregoing warranty, Kennedy Valve shall, upon prompt written notice thereof, repair or replace, F.O.B. point of manufacture, such defective part or parts. Purchaser shall, if requested, return the part or parts to Kennedy Valve, transportation prepaid. Purchaser shall bear all responsibility and expense incurred for removal, reinstallation and shipping in connection with any part supplied under the foregoing warranty.

THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR FITNESS. IN NO EVENT SHALL KENNEDY VALVE COMPANY BE RESPONSIBLE OR LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSSES, DAMAGES, OR EXPENSES. Table of Contents HYDRANTS 5 1/4" Valve Opening with 6" & 8" Inlet Connection (2 Hose - 1 Pumper) Page 1 4 1/2" Valve Opening with 4" and 6" Inlet Connection (2 Hose - 1 Pumper) Page 1 5 1/4" Valve Opening with 6" & 8" Inlet Connection 2 Hose Page 2 K81 Pumper only hydrants 5 1/4" and 4 1/2" Page 3 K81 Guardian Insert Hydrants for Matthews (4 & 4 1/2" MVO) Page 4 K81 Hydrant List Adders Page 5

GATE VALVES (AWWA) C-509 Resilient Gate Valves (FLG, MJ, & Others) Page 6 C-509 Resilient Gate Valves (Tyton and Push-on Tap) Page 7 C-515 Ductile Iron Resilient Gate Valves Page 8 -10

GATE VALVES (DOUBLE DISC) C-500 Double Disk Gate Valves Page 11 - 12

BUTTERFLY VALVES (AWWA) Butterfly Valves Page 15

CHECK VALVES Check Valves Swing & Special Lay Length Page 19 Check Valves - Cushion, Increasing, and Kenflex Page 20

PLANT VALVES Eccentric Plug Valves Page 17 Eccentric Plug Valve Gearing Page 18 Mud Valves/ Flap Valves/ Pressure Relief Valves Page 21 Shear Gate Valves Page 22

TAPPING SLEEVES Tyler Tapping Sleeves Page 16 Mueller Tapping Sleeves Page 16

ACCESSORIES Extension Stems/ Floor Stands Page 23 Chain Wheel Sprockets and Chain Figure 197 Page 13 Double Disc Gate Vale Optional Equipment/ List Adders Page 13 Worm Gear Actuators Page 18

PARTS K81 Extensions/ Parts Page 24 K81 Hydrant Parts Page 25 - 26 Discontinued Hydrant Parts (K10, K10B, K11) Page 27 - 33 C-509 Gate Valve Parts Page 34 - 35 C-515 Gate Valve Parts Page 36 AWWA Swing Check Valve Parts Page 37 - 39 REQUIRED ORDERING INFORMATION WHEN PURCHASING KENNEDY VALVE FIRE HYDRANTS When Ordering Kennedy Fire Hydrants, be sure to furnish the following information:

REQUIREMENTS EXAMPLES

1. Size and Type of hydrant. AWWA – 5 ¼” K81D

2. Direction to open. Left – Counter Clockwise Right – Clockwise

3. Size and Shape of operating and cap nuts. Pentagon 1 ½” Point to Flat

4. Exact threading information for 2 ½” hose nozzle. 3 1/16” O.D. x 7 ½” TPI (NST)

5. Exact threading information for 4”- 4 ½” steamer nozzle. 5 ¾” O.D. x 4 TPI (NST)

6. Depth of trench (distance from ground line to bottom of connecting pipe). 5 Foot - 6 Inches

7. Size and type of connection to main. 6” Mechanical Joint

8. Color of hydrant. Yellow

REQUIRED ORDERING INFORMATION WHEN PURCHASING KENNEDY VALVE GATE VALVES When Ordering Kennedy Valve gate valves, be sure to furnish the following information:

REQUIREMENTS EXAMPLES

1. Size and type of valve. 6” Figure 7571 Mechanical Joint* (*Please specify “with or without valve accessories” when ordering)

2. Direction to open. Open Left – Counter Clockwise Open Right – Clockwise

3. Type of operator for the stem. 2" Square operating nut Hand wheel

REQUIRED ORDERING INFORMATION WHEN PURCHASING KENNEDY VALVE CHECK VALVES When ordering Kennedy Valve swing check valves please specify the following:

REQUIREMENTS EXAMPLES

1. Specify type of facing on Disc. 1106 – Bronze facing. 1106A – Rubber facing.

2. Specify any additional configuration requirements Lever and Weight Lever and Spring KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

KENNEDY K81 GUARDIAN FIRE HYDRANTS 5 1/4 & 4 1/2" MVO K-81D - AWWA & UL/FM Guardian 5 1/4" Main Valve Opening with 6" & 8" Inlet Connection 2 - Hose Nozzles and 1 - Pumper Nozzle Back to table of contents. Depth of 6" Flange 6" MJ Shoe 6" MJ Shoe Trench Shoe L/ ACC W/ ACC 1' 6" $3,881.00 $3,881.00 $3,955.00 2' 0" $3,983.00 $3,983.00 $4,057.00 2' 6" $4,085.00 $4,085.00 $4,159.00 3' 0" $4,187.00 $4,187.00 $4,261.00 3' 6" $4,289.00 $4,289.00 $4,363.00 4' 0" $4,391.00 $4,391.00 $4,466.00 4' 6" $4,493.00 $4,493.00 $4,567.00 5' 0" $4,595.00 $4,595.00 $4,669.00 5' 6" $4,697.00 $4,697.00 $4,771.00 6' 0" $4,799.00 $4,799.00 $4,873.00 6' 6" $4,901.00 $4,901.00 $4,975.00 7' 0" $5,003.00 $5,003.00 $5,077.00 7' 6" $5,106.00 $5,106.00 $5,179.00 8' 0" $5,208.00 $5,208.00 $5,281.00 8' 6" $5,310.00 $5,310.00 $5,383.00 9' 0" $5,412.00 $5,412.00 $5,485.00 9' 6" $5,513.00 $5,513.00 $5,587.00 10' 0" $5,615.00 $5,615.00 $5,689.00 10' 6" $5,719.00 $5,719.00 $5,791.00 11' 0" $5,820.00 $5,820.00 $5,894.00 11' 6" $5,921.00 $5,921.00 $5,996.00 For Straight Shoe……………………………… Add $331.00 to 6" MJ with Accessories For Tyton with Accessories…………………… Decuct $27.00 from 6" MJ with Accessories For Tyton without Accessories……………….. Decuct $72.00 from 6" MJ with Accessories For 8" with Accessories………………………. Add $129.00 to 6" MJ witih Accessories For 8" without Accessories………………….. Add $42.00 to 6" MJ witih Accessories

Guardian 4 1/2" Main Valve Opening with 4" and 6" Inlet Connection 2 - Hose Nozzles and 1 - Pumper Nozzle

Depth of 6" FLG 6" MJ Shoe 6" MJ Shoe 4" MJ Shoe 4" MJ Shoe Trench Shoe L/ ACC W/ ACC L/ ACC W/ ACC 1' 6" $3,809.00 $3,809.00 $3,884.00 $3,796.00 $3,872.00 2' 0" $3,889.00 $3,889.00 $3,962.00 $3,875.00 $3,951.00 2' 6" $3,966.00 $3,966.00 $4,041.00 $3,954.00 $4,030.00 3' 0" $4,046.00 $4,046.00 $4,120.00 $4,032.00 $4,108.00 3' 6" $4,124.00 $4,124.00 $4,198.00 $4,111.00 $4,187.00 4' 0" $4,204.00 $4,204.00 $4,277.00 $4,190.00 $4,266.00 4' 6" $4,281.00 $4,281.00 $4,356.00 $4,269.00 $4,345.00 5' 0" $4,361.00 $4,361.00 $4,435.00 $4,348.00 $4,424.00 5' 6" $4,438.00 $4,438.00 $4,514.00 $4,427.00 $4,503.00 6' 0" $4,518.00 $4,518.00 $4,592.00 $4,505.00 $4,581.00 6' 6" $4,598.00 $4,598.00 $4,671.00 $4,584.00 $4,660.00 7' 0" $4,676.00 $4,676.00 $4,750.00 $4,663.00 $4,739.00 7' 6" $4,756.00 $4,756.00 $4,829.00 $4,741.00 $4,817.00 8' 0" $4,833.00 $4,833.00 $4,907.00 $4,819.00 $4,895.00 8' 6" $4,910.00 $4,910.00 $4,986.00 $4,897.00 $4,973.00 9' 0" $4,988.00 $4,988.00 $5,065.00 $4,975.00 $5,051.00 9' 6" $5,068.00 $5,068.00 $5,144.00 $5,053.00 $5,129.00 10' 0" $5,145.00 $5,145.00 $5,223.00 $5,131.00 $5,207.00 10' 6" $5,222.00 $5,222.00 $5,301.00 $5,209.00 $5,285.00 11' 0" $5,300.00 $5,300.00 $5,380.00 $5,287.00 $5,363.00 11' 6" $5,380.00 $5,380.00 $5,459.00 $5,365.00 $5,441.00 Note: 4" inlet connetions are AWWA rated only.

Add for 4" STORZ Connection $566.00 ~ Add for 5" STORZ Connection $665.00 Add for each 6" increase in Depth of Trench beyond 11'6" (5-1/4 $102.00 or 4-1/2 $79.00)

PAGE 1 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

KENNEDY K81 GUARDIAN FIRE HYDRANTS 5 1/4 & 4 1/2" MVO K-81D - AWWA & UL/FM Guardian 5 1/4" Main Valve Opening with 6" & 8" Inlet Connection 2 - Hose Nozzles Back to table of contents. Depth of 6" Flange 6" MJ Shoe 6" MJ Shoe Trench Shoe L/ ACC W/ ACC 1' 6" $3,488.00 $3,488.00 $3,562.00 2' 0" $3,590.00 $3,590.00 $3,664.00 2' 6" $3,692.00 $3,692.00 $3,766.00 3' 0" $3,794.00 $3,794.00 $3,868.00 3' 6" $3,896.00 $3,896.00 $3,970.00 4' 0" $3,998.00 $3,998.00 $4,072.00 4' 6" $4,100.00 $4,100.00 $4,174.00 5' 0" $4,202.00 $4,202.00 $4,276.00 5' 6" $4,304.00 $4,304.00 $4,378.00 6' 0" $4,406.00 $4,406.00 $4,480.00 6' 6" $4,507.00 $4,507.00 $4,581.00 7' 0" $4,610.00 $4,610.00 $4,684.00 7' 6" $4,712.00 $4,712.00 $4,786.00 8' 0" $4,814.00 $4,814.00 $4,888.00 8' 6" $4,916.00 $4,916.00 $4,990.00 9' 0" $5,018.00 $5,018.00 $5,092.00 9' 6" $5,120.00 $5,120.00 $5,194.00 10' 0" $5,222.00 $5,222.00 $5,296.00 10' 6" $5,324.00 $5,324.00 $5,398.00 11' 0" $5,426.00 $5,426.00 $5,500.00 11' 6" $5,528.00 $5,528.00 $5,602.00 For Straight Shoe……………………………… Add $331.00 to 6" MJ with Accessories For Tyton with Accessories…………………… Decuct $27.00 from 6" MJ with Accessories For Tyton without Accessories……………….. Decuct $72.00 from 6" MJ with Accessories For 8" with Accessories………………………. Add $129.00 to 6" MJ witih Accessories For 8" without Accessories………………….. Add $42.00 to 6" MJ witih Accessories

Guardian 4 1/2" Main Valve Opening with 6" and 4" Inlet Connection 2 - Hose Nozzles Back to table of contents. Depth of 4" Flange 6" Flange 6" MJ Shoe 6" MJ Shoe 4" MJ Shoe 4" MJ Shoe Trench Shoe Shoe L/ ACC W/ ACC L/ ACC W/ ACC 1' 6" $3,363.00 $3,377.00 $3,377.00 $3,451.00 $3,363.00 $3,440.00 2' 0" $3,442.00 $3,455.00 $3,455.00 $3,530.00 $3,442.00 $3,519.00 2' 6" $3,521.00 $3,534.00 $3,534.00 $3,609.00 $3,521.00 $3,597.00 3' 0" $3,600.00 $3,613.00 $3,613.00 $3,687.00 $3,600.00 $3,676.00 3' 6" $3,678.00 $3,692.00 $3,692.00 $3,766.00 $3,678.00 $3,755.00 4' 0" $3,757.00 $3,770.00 $3,770.00 $3,845.00 $3,757.00 $3,834.00 4' 6" $3,836.00 $3,849.00 $3,849.00 $3,924.00 $3,836.00 $3,912.00 5' 0" $3,915.00 $3,928.00 $3,928.00 $4,003.00 $3,915.00 $3,992.00 5' 6" $3,993.00 $4,007.00 $4,007.00 $4,081.00 $3,993.00 $4,070.00 6' 0" $4,072.00 $4,086.00 $4,086.00 $4,160.00 $4,072.00 $4,149.00 6' 6" $4,151.00 $4,164.00 $4,164.00 $4,239.00 $4,151.00 $4,227.00 7' 0" $4,230.00 $4,243.00 $4,243.00 $4,317.00 $4,230.00 $4,306.00 7' 6" $4,309.00 $4,322.00 $4,322.00 $4,396.00 $4,309.00 $4,384.00 8' 0" $4,388.00 $4,401.00 $4,401.00 $4,475.00 $4,388.00 $4,462.00 8' 6" $4,467.00 $4,480.00 $4,480.00 $4,554.00 $4,467.00 $4,540.00 9' 0" $4,546.00 $4,559.00 $4,559.00 $4,633.00 $4,546.00 $4,618.00 9' 6" $4,625.00 $4,638.00 $4,638.00 $4,711.00 $4,625.00 $4,696.00 10' 0" $4,704.00 $4,717.00 $4,717.00 $4,790.00 $4,704.00 $4,774.00 10' 6" $4,783.00 $4,796.00 $4,796.00 $4,869.00 $4,783.00 $4,852.00 11' 0" $4,862.00 $4,875.00 $4,875.00 $4,948.00 $4,862.00 $4,930.00 11' 6" $4,941.00 $4,954.00 $4,954.00 $5,027.00 $4,941.00 $5,008.00

Add for 4" STORZ Connection $566.00 ~ Add for 5" STORZ Connection $665.00 Add for each 6" increase in Depth of Trench beyond 11'6" (5-1/4 $102.00 or 4-1/2 $79.00)

Page 2 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

KENNEDY GUARDIAN FIRE HYDRANTS K-81D - AWWA & UL/FM

K-81D Guardian 5 1/4" Main Valve Opening with 2 Pumpers (4" inlet connections are not available.) Back to table of contents. Depth of 6" FLANGE 6" MJ 6" MJ 6" TYTON 6" TYTON 6" STRAIGHT 8" MJ 8" MJ Trench SHOE L/ACC W/ACC L/GASKET W/GASKET SHOE L/ACC W/ACC 1' 6" $3,709.00 $3,709.00 $3,783.00 $3,711.00 $3,755.00 $4,114.00 $3,870.00 $3,912.00 2' 0" $3,811.00 $3,811.00 $3,885.00 $3,813.00 $3,857.00 $4,216.00 $3,972.00 $4,014.00 2' 6" $3,913.00 $3,913.00 $3,987.00 $3,915.00 $3,959.00 $4,318.00 $4,074.00 $4,116.00 3' 0" $4,015.00 $4,015.00 $4,089.00 $4,017.00 $4,061.00 $4,420.00 $4,176.00 $4,218.00 3' 6" $4,117.00 $4,117.00 $4,191.00 $4,120.00 $4,164.00 $4,522.00 $4,278.00 $4,320.00 4' 0" $4,219.00 $4,219.00 $4,293.00 $4,222.00 $4,266.00 $4,624.00 $4,380.00 $4,422.00 4' 6" $4,321.00 $4,321.00 $4,395.00 $4,324.00 $4,368.00 $4,727.00 $4,482.00 $4,524.00 5' 0" $4,423.00 $4,423.00 $4,497.00 $4,426.00 $4,470.00 $4,827.00 $4,584.00 $4,626.00 5' 6" $4,525.00 $4,525.00 $4,599.00 $4,528.00 $4,572.00 $4,931.00 $4,686.00 $4,728.00 6' 0" $4,627.00 $4,627.00 $4,701.00 $4,630.00 $4,674.00 $5,033.00 $4,788.00 $4,830.00 6' 6" $4,730.00 $4,730.00 $4,804.00 $4,732.00 $4,776.00 $5,135.00 $4,891.00 $4,933.00 7' 0" $4,832.00 $4,832.00 $4,906.00 $4,834.00 $4,878.00 $5,237.00 $4,993.00 $5,035.00 7' 6" $4,934.00 $4,934.00 $5,008.00 $4,936.00 $4,980.00 $5,339.00 $5,095.00 $5,137.00 8' 0" $5,036.00 $5,036.00 $5,110.00 $5,038.00 $5,082.00 $5,441.00 $5,197.00 $5,239.00 8' 6" $5,138.00 $5,138.00 $5,212.00 $5,140.00 $5,184.00 $5,543.00 $5,299.00 $5,341.00 9' 0" $5,240.00 $5,240.00 $5,314.00 $5,242.00 $5,286.00 $5,645.00 $5,401.00 $5,443.00 9' 6" $5,342.00 $5,342.00 $5,416.00 $5,344.00 $5,388.00 $5,747.00 $5,503.00 $5,545.00 10' 0" $5,444.00 $5,444.00 $5,518.00 $5,446.00 $5,490.00 $5,849.00 $5,605.00 $5,647.00 10' 6" $5,546.00 $5,546.00 $5,620.00 $5,548.00 $5,592.00 $5,951.00 $5,707.00 $5,749.00 11' 0" $5,648.00 $5,648.00 $5,722.00 $5,650.00 $5,694.00 $6,053.00 $5,809.00 $5,851.00 11' 6" $5,750.00 $5,750.00 $5,824.00 $5,752.00 $5,796.00 $6,155.00 $5,911.00 $5,953.00

K-81D Guardian 4 1/2" Main Valve Opening with One Pumper (8" inlet connections are not available.) Back to table of contents. Depth of 4" OR 6" 6" MJ 6" MJ 6" TYTON 6" TYTON 6" STRAIGHT 4" MJ 4" MJ Trench FLANGE L/ACC W/ACC L/GASKET W/GASKET SHOE L/ACC W/ACC 1'6" $3,218.00 $3,232.00 $3,306.00 $3,234.00 $3,278.00 $3,636.00 $3,218.00 $3,294.00 2'0" $3,898.00 $3,312.00 $3,385.00 $3,312.00 $3,356.00 $3,716.00 $3,296.00 $3,372.00 2'6" $3,376.00 $3,390.00 $3,464.00 $3,390.00 $3,434.00 $3,794.00 $3,376.00 $3,452.00 3' 0" $3,468.00 $3,468.00 $3,543.00 $3,470.00 $3,514.00 $3,874.00 $3,468.00 $3,530.00 3' 6" $3,546.00 $3,546.00 $3,622.00 $3,550.00 $3,594.00 $3,952.00 $3,546.00 $3,610.00 4' 0" $3,626.00 $3,626.00 $3,700.00 $3,628.00 $3,672.00 $4,032.00 $3,626.00 $3,688.00 4' 6" $3,704.00 $3,704.00 $3,779.00 $3,708.00 $3,752.00 $4,110.00 $3,704.00 $3,768.00 5' 0" $3,782.00 $3,782.00 $3,859.00 $3,786.00 $3,830.00 $4,188.00 $3,782.00 $3,846.00 5' 6" $3,862.00 $3,862.00 $3,937.00 $3,864.00 $3,908.00 $4,268.00 $3,862.00 $3,926.00 6' 0" $3,940.00 $3,940.00 $4,016.00 $3,944.00 $3,988.00 $4,346.00 $3,940.00 $4,004.00 6' 6" $4,020.00 $4,020.00 $4,095.00 $4,022.00 $4,066.00 $4,426.00 $4,020.00 $4,082.00 7' 0" $4,098.00 $4,098.00 $4,174.00 $4,100.00 $4,146.00 $4,504.00 $4,098.00 $4,162.00 7' 6" $4,176.00 $4,176.00 $4,251.00 $4,178.00 $4,224.00 $4,582.00 $4,176.00 $4,238.00 8' 0" $4,254.00 $4,254.00 $4,330.00 $4,256.00 $4,302.00 $4,660.00 $4,254.00 $4,316.00 8' 6" $4,332.00 $4,332.00 $4,409.00 $4,334.00 $4,380.00 $4,738.00 $4,332.00 $4,394.00 9' 0" $4,410.00 $4,410.00 $2,242.00 $4,412.00 $4,458.00 $4,816.00 $4,410.00 $4,472.00 9' 6" $4,488.00 $4,488.00 $2,281.00 $4,490.00 $5,336.00 $4,894.00 $4,488.00 $4,550.00 10' 0" $4,566.00 $4,566.00 $2,320.00 $4,568.00 $4,614.00 $4,972.00 $4,566.00 $4,628.00 10' 6" $4,644.00 $4,644.00 $2,359.00 $4,646.00 $4,692.00 $5,050.00 $4,644.00 $4,706.00 11' 0" $4,722.00 $4,722.00 $2,398.00 $4,724.00 $4,770.00 $5,128.00 $4,722.00 $4,784.00 11' 6" $4,800.00 $4,800.00 $2,437.00 $4,802.00 $4,848.00 $5,206.00 $4,800.00 $4,862.00

PAGE 3 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

GUARDIAN INSERTS TRAFFIC MODEL REPLACEMENT HYDRANT FOR MATHEWS MODERNIZED HYDRANT K - 81AW GUARDIAN INSERTS

4" * REGULAR MODEL-4 1/2" *REGULAR OR BRONZE LINED - K81AW Guardian Insert Complete with 2 to 2 1/2" hose nozzles and 1 steamer nozzle, with adaptor to fit existing Mathews elbows. All prices are for hydrant LESS elbow, case, and case cap. Back to table of contents. Depth of Trench 2 Hose Nozzles 2 Hose - 1 Pumper Nozzle 2' 0" $4,424.00 $4,638.00 2' 6" $4,424.00 $4,638.00 3' 0" $4,424.00 $4,525.00 3' 6" $4,424.00 $4,641.00 4' 0" $4,543.00 $4,741.00 4' 6" $4,646.00 $4,867.00 5' 0" $4,775.00 $4,993.00 5' 6" $4,904.00 $5,119.00 6' 0" $5,033.00 $5,245.00 6' 6" $5,162.00 $5,534.00 * = 4" and 4 1/2" REGULAR type will require a 4 1/2" Bronze-lined case cap if case cap is desired. NOTE: Trench depth is the dimension from the ground line to the bottom of the connecting pipe, even though AW are normally furnished less elbow.

5 1/4" - 6" * REGULAR OR BRONZE LINED MODEL - K81AW Guardian Insert 5 1/4" or 6" Main Valve Opening, complete with 2 to 2 1/2" hose nozzles and 1 steamer nozzle, adapter to fit with existing Mathews elbows. All prices are for hydrant LESS elbow, case, and case cap. Back to table of contents. Depth of Trench 2 Hose Nozzles 2 Hose - 1 Pumper Nozzle 2' 0" $4,482.00 $4,742.00 2' 6" $4,482.00 $4,742.00 3' 0" $4,482.00 $4,742.00 3' 6" $4,482.00 $4,742.00 4' 0" $4,615.00 $4,867.00 4' 6" $4,746.00 $5,009.00 5' 0" $4,879.00 $5,143.00 5' 6" $5,011.00 $5,273.00 6' 0" $5,144.00 $5,404.00 6' 6" $5,279.00 $5,534.00 7' 0" $5,412.00 $5,673.00 7' 6" $5,671.00 $5,931.00 8' 0" $5,904.00 $6,165.00 8' 6" $6,140.00 $6,401.00

PAGE 4 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

LIST ADDERS APPLICABLE TO GUARDIAN K81D FIRE HYDRANTS Back to table of contents.

PRICE

ADD for Patriot check valve PT# 1610600906 $1,294.00 Split Swivel Gland PT# 1060600SGMJACC needed and included with Patriot Check Valve.

ADD for each 6" increase in Depth of Trench (beyond 11' 6") 4 1/2" MVO $78.00 5 1/4" MVO $102.00

ADD for 250 LB flange elbow with raised face (5 1/4" MVO only) (Straight or 90° only) $146.00

ADD for 316 stainless steel elbow bolts and nuts $112.00

ADD for Monitor Hydrant - 3" or 4" outlet $1,866.00 ► Note: (3" is UL and FM approved) (4" is FM approved only) ► Note: Monitor elbows available for 5 1/4" main valve hydrants only. ADD for tap hole in upper $54.00

ADD for Mountain Hydrant (additional spool for deep snow areas) (5 1/4" MVO only) POA

2 1/2" Jones Coupling Nozzle - each (2 required - PC# 3198442) $260.00 2 1/2" Jones Coupling Cap $360.00

Bliss Steamer Nozzle $500.00 Bliss Steamer Cap $400.00 Spanner Wrench (Fig 111P) PC# 446098P (1 1/2" pent.) $80.00 Centering Spider (441986P) $250.00

ADD Auxiliary Valve end flange accessory kit $44.00 ● (Kit includes extra end flanged bolts, nuts, and gaskets.) Tamper proof shield nut w/ set screw (PC# 3212114 nut & 444449P set-screw) $210.00 Tamper proof wrench - 1 1/2" pent (PC# 446097P) $440.00 Hand wheel (PC# 3195302) - 1 1/2" Pentagon Loose $514.00 Fixed $600.00

Add for STORZ Connection 4" = PC# 2186692 $566.00 5" = PC# 2194772 $665.00

Special nozzle arrangements not listed POA

2 1/2" FIG. 109XNS hydrant gate valve WITH cap, chain, gasket BOLT ON SEE CURRENT 2 1/2" FIG. 109XMN hydrant gate valve LESS cap, chain, gasket THREADED UL/FM 2 1/2" FIG. 109XMNC hydrant gate valve WITH cap, chain, gasket THREADED PRICE SHEET ► Note: 109's will be shipped & invoice separately

PAGE 5 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C-509 KS-FW RESILIENT SEATED GATE VALVES Back to table of contents. FIG 8057 FIG 8068A FIG 8561A FIG 8597 SCREWED ENDS FLG X FLG OS&Y FLANGED ENDS PVC ENDS WITH GASKETS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 2" $714.00 20# See UL/FM $732.00 42# $761.00 35# 2 1/2" $884.00 34# price book for $874.00 49# $1,043.00 44# 3" $1,053.00 47# and discount for $1,038.00 62# $1,112.00 54# 4" 2 1/2" - 12" $1,160.00 99# $1,273.00 84# 6" gate valves. $1,550.00 142# $1,648.00 138# 8" $2,423.00 239# $2,598.00 224# 10" $3,850.00 409# 12" $4,649.00 554#

FIG 8571 MJ X MJ FIG 8571 MJ X MJ FIG 8572 FLG X MJ FIG 8572 FLG X MJ WITH ACCESS LESS ACCESS WITH ACCESS LESS ACCESS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 2" $835.00 46# $740.00 36# 3" $1,094.00 69# $1,048.00 59# $1,017.00 65# $994.00 60# 4" $1,251.00 102# $1,170.00 86# $1,191.00 88# $1,117.00 90# 6" $1,620.00 158# $1,493.00 134# $1,563.00 146# $1,493.00 134# 8" $2,520.00 237# $2,378.00 207# $2,435.00 229# $2,333.00 214# 10" $3,917.00 387# $3,708.00 351# $3,831.00 382# $3,708.00 365# 12" $4,951.00 523# $4,692.00 473# $4,738.00 522# $4,477.00 497#

FIG 8576 CUTTING-IN FIG 8576 CUTTING-IN FIG 8950 MJ X FLG FIG 8950 MJ X FLG WITH ACCESS LESS ACCESS TAP - WITH ACCESS TAP - LESS ACCESS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 4" $1,649.00 103# $1,614.00 87# $1,563.00 101# $1,476.00 93# 6" $2,243.00 158# $2,204.00 134# $2,166.00 155# $2,085.00 145# 8" $3,478.00 237# $3,430.00 207# $3,213.00 240# $3,095.00 225# 10" $5,148.00 387# $4,920.00 351# $4,810.00 411# $4,667.00 393# 12" $6,496.00 523# $6,210.00 473# $7,352.00 553# $7,050.00 528#

FIG 8067 SCREWED END OS&Y SIZE PRICE WEIGHT 2" $912.00 30# 2 1/2" $1,144.00 50# 3" $1,332.00 70#

Figure 8057 Furnished with operating nut unless wheel is specified.

Figure 8561A Furnished with wheel unless operating nut is specified

and does not include bolts, nuts & gaskets for flange side.

All other NRS figure numbers furnished with operating nuts.

Page 6 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C-509 KS-FW RESILIENT SEATED GATE VALVES Back to table of contents. FIG 8901 SLIP JT X SLIP JT FIG 8901 SLIP JT X SLIP JT (TYTON) LESS GASKETS (TYTON) WITH GASKETS SIZE PRICE WEIGHT SIZE PRICE WEIGHT 4" $1,201.00 82# 4" $1,275.00 83# 6" $1,581.00 139# 6" $1,648.00 141# 8" $2,402.00 217# 8" $2,627.00 221# 10" $3,880.00 359# 10" $4,017.00 363# 12" $4,863.00 501# 12" $5,028.00 505#

FIG 8902 SLIP JT X FLG FIG 8902 SLIP JT X FLG (TYTON) LESS GASKETS (TYTON) WITH GASKETS SIZE PRICE WEIGHT SIZE PRICE WEIGHT 4" $1,180.00 85# 4" $1,210.00 86# 6" $1,555.00 139# 6" $1,599.00 140# 8" $2,458.00 220# 8" $2,515.00 222# 10" $3,865.00 372# 10" $3,934.00 376# 12" $4,756.00 514# 12" $4,840.00 518#

FIG 8954 PUSH ON - TAP FIG 8954 PUSH ON - TAP LESS GASKETS WITH GASKETS SIZE PRICE WEIGHT SIZE PRICE WEIGHT 4" $1,554.00 86# 4" $1,628.00 86# 6" $2,114.00 150# 6" $2,182.00 150# 8" $3,204.00 210# 8" $3,318.00 210# 10" $4,796.00 10" $4,934.00 12" $5,874.00 12" $6,038.00

TYTON GASKET PART CODES 4" 441875P 6" 441879P 8" 441881P 10" 441883P 12" 441885P

PALLET QUANTITIES SIZE NRS WITH WHEEL NRS WITH NUT OS&Y CHECK VALVES 2" 36 84 N/A 36 2 1/2" 36 56 36 30 3" 30 36 30 20 4" 30 30 24 12 6" 16 16 10 9 8" 8 8 8 4 10" 6 6 6 4 12" 4 6 4 4

►NOTE: Valves 18" and above require gearing for proper operation.

Page 7 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C515--DUCTILE IRON--RESILIENT SEATED GATE VALVES MODEL NUMBER -- "KS-RW" Back to table of contents. Next C515 Page FIG 7571 MJ X MJ FIG 7571 MJ X MJ FIG 7572 FLG X MJ FIG 7572 FLG X MJ WITH ACCESS LESS ACCESS WITH ACCESS LESS ACCESS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 2" $835.00 47# $740.00 37# N/A N/A 3" $1,094.00 68# $1,048.00 58# $1,017.00 60# $955.00 55# 4" $1,251.00 86# $1,170.00 70# $1,191.00 83# $1,117.00 75# 6" $1,620.00 134# $1,493.00 110# $1,563.00 123# $1,493.00 111# 8" $2,520.00 203# $2,378.00 173# $2,435.00 195# $2,333.00 180# 10" $3,917.00 323# $3,708.00 287# $3,831.00 334# $3,708.00 316# 12" $4,951.00 412# $4,692.00 362# $4,738.00 423# $4,477.00 398# 14" $15,321.00 $14,499.00 $14,910.00 $14,499.00 16" $16,624.00 $15,728.00 $16,176.00 $15,728.00 18" $27,342.00 $25,744.00 $26,543.00 $25,744.00 20" $32,647.00 $30,918.00 $31,784.00 $30,918.00 24" $46,602.00 $43,962.00 $45,279.00 $43,962.00 30" POA POA POA POA 36" POA POA POA POA 42" POA POA POA POA 48" POA POA POA POA

►NOTE: Valves 18" and above require gearing for proper operation.

FIG 7576 CUTTING-IN FIG 7576 CUTTING-IN FIG 7950 MJ X FLG FIG 7950 MJ X FLG WITH ACCESS LESS ACCESS TAP - WITH ACCESS TAP - LESS ACCESS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 4" $1,649.00 86# $1,614.00 70# $1,561.00 94# $1,475.00 86# 6" $2,243.00 134# $2,204.00 110# $2,165.00 186# $2,084.00 112# 8" $3,478.00 203# $3,430.00 173# $3,213.00 192# $3,095.00 177# 10" $5,148.00 $4,920.00 $4,810.00 320# $4,667.00 302# 12" $6,496.00 $6,210.00 $7,351.00 411# $7,050.00 386# 14" $16,597.00 $16,187.00 16" $18,849.00 $18,356.00 18" $31,277.00 $30,478.00 20" $37,666.00 $36,800.00 24" $51,259.00 $49,941.00

►NOTE: Valves 18" and above require gearing for proper operation.

RESILIENT SEAT GATE VALVE GEARING ONLY for NON-RISING STEM GATE VALVES ENCLOSED BEVELED ENCLOSED SPUR 14" - 16" $4,933.00 14" - 16" $4,734.00 18" $5,866.00 18" $5,445.00 20" $5,866.00 20" $5,445.00 24" $6,583.00 24" $6,355.00

Page 8 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C515--DUCTILE IRON--RESILIENT SEATED GATE VALVES MODEL NUMBER -- "KS-RW" Previous C515 Page Back to table of contents. Next C515 Page FIG 7057 FIG 7566 SCREWED ENDS FLG X FLG OS&Y SIZE PRICE WEIGHT PRICE 2" $714.00 20# ▼ 2 1/2" $884.00 40# See UL/FM price book 3" $1,053.00 46# and discounts for 4" 2 1/2 - 12" gate valves 6" 8" 10" 12" 14" $20,660.00 16" $25,599.00 18" $28,821.00 20" $36,179.00 24" $49,993.00

*FIG 7561A FIG 7592ABF FIG 7593ABF FIG 7597 FLANGED ENDS FLG X GRV NRS GRV X GRV NRS PVC W/GASKETS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 2" $732.00 42# $761.00 35# 2 1/2" $874.00 52# $874.00 44# $874.00 44# $1,043.00 44# 3" $1,038.00 68# $1,038.00 55# $1,038.00 54# $1,112.00 54# 4" $1,160.00 82# $1,160.00 77# $1,160.00 74# $1,273.00 70# 6" $1,550.00 126# $1,549.00 119# $1,549.00 107# $1,648.00 112# 8" $2,423.00 201# $2,423.00 176# $2,423.00 145# $2,598.00 178# 10" $3,850.00 358# 12" $4,649.00 449# 14" $14,499.00 16" $15,728.00 18" $25,744.00 20" $30,918.00 24" $43,962.00 30" POA 36" POA 42" POA 48" POA 54" POA ►NOTE: Valves 18" and above require gearing for proper operation. ►NOTE: Figure number 7561 in sizes 14" - 48" get no tap in the body.

*All 2 1/2" through 12" 7561A Valves are Tapped & Plugged at the 'A' Position (2 1/2" - 4" are 1/2" Taps) (6" - 12" are 3/4" Taps) Figure 7561 Furnished with wheel unless operating nut is specified and does not include bolts, nuts & gaskets for flange side. All other NRS figure numbers furnished with operating nuts.

RESILIENT SEAT GATE VALVE GEARING ONLY for NON-RISING STEM GATE VALVES ENCLOSED BEVELED ENCLOSED SPUR 14" - 16" $4,933.00 14" - 16" $4,734.00 18" $5,866.00 18" $5,446.00 20" $5,866.00 20" $5,446.00 24" $6,584.00 24" $6,356.00

Page 9 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C515--DUCTILE IRON--RESILIENT SEATED GATE VALVES MODEL NUMBER -- "KS-RW" Previous C515 Page Back to table of contents. FIG 7901 SLIP JT X FIG 7901 SLIP JT X FIG 7902 SLIP JT X FIG 7902 SLIP JT X FLG SLIP JT (TYTON) SLIP JT (TYTON) FLG (TYTON) (TYTON) LESS GASKETS WITH GASKETS LESS GASKETS WITH GASKETS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 4" $1,202.00 77# $1,275.00 78# $1,180.00 83# $1,210.00 84# 6" $1,581.00 124# $1,648.00 126# $1,555.00 124# $1,599.00 125# 8" $2,401.00 188# $2,628.00 192# $2,458.00 188# $2,515.00 190# 10" $3,880.00 311# $4,017.00 315# $3,865.00 313# $3,934.00 317# 12" $4,863.00 424# $5,028.00 428# $4,756.00 440# $4,840.00 444# 14" $15,997.00 $16,302.00 16" $16,302.00 $16,451.00 ►NOTE: Valves 18" and above require gearing for proper operation.

AWWA C515--250 LB FLANGE DUCTILE IRON--RESILIENT SEATED GATE VALVES MODEL NUMBER -- "KS-RW" FIG 7058 FLANGED END NRS SIZE PRICE WEIGHT ▼ See UL/FM price book 2 1/2" $2,200.00 79# for 250# OS&Y gate valves 3" $2,200.00 79# 4" $2,710.00 99# 6" $3,982.00 167# 8" $5,426.00 253# 10" $7,492.00 415# 12" $10,824.00 533#

RESILIENT SEAT GATE VALVE GEARING ONLY for NON-RISING STEM GATE VALVES ENCLOSED BEVELED ENCLOSED SPUR 14" - 16" $4,933.00 14" - 16" $4,734.00 18" $5,866.00 18" $5,446.00 20" $5,866.00 20" $5,446.00 24" $6,584.00 24" $6,356.00

Page 10 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C500 DOUBLE DISC GATE VALVES Back to table of contents. Next DD Page * FIG C561/F5070 FIG C571/F5065 FIG C571/F5065 FLANGED MJ WITH ACCESS MJ LESS ACCESS SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 3" $1,238.00 50# $1,306.00 64# $1,250.00 52# 4" $1,384.00 90# $1,494.00 106# $1,398.00 90# 6" $1,850.00 150# $1,934.00 176# $1,782.00 154# 8" $2,890.00 243# $3,006.00 266# $2,838.00 238# 10" $4,594.00 405# $4,672.00 415# $4,424.00 375# 12" $5,546.00 535# $5,906.00 522# $5,596.00 480# 14" $11,769.00 876# $12,642.00 863# $11,769.00 765# 16" $15,727.00 1130# $16,622.00 1237# $15,727.00 1119# 18" $25,743.00 1460# $27,341.00 1494# $25,743.00 1360# 20" $30,918.00 1980# $32,647.00 1988# $39,018.00 1830# 24" $43,961.00 2730# $46,600.00 2646# $43,961.00 2430# 30" $90,384.00 4784# $95,301.00 5023# $93,084.00 4725# 36" $114,941.00 7560# $121,918.00 8246# $114,941.00 7800#

* FIG C572/F5066 * FIG C572/F5066 FIG C566/F5072 FLG X MJ WITH ACCESS FLG X MJ LESS ACCESS OS&Y RISING STEM SIZE PRICE WEIGHT PRICE WEIGHT PRICE WEIGHT 4" $1,422.00 92# $1,334.00 84# N/A 6" $1,866.00 145# $1,782.00 134# N/A 8" $2,906.00 244# $2,784.00 230# N/A 10" $4,570.00 393# $4,424.00 373# N/A 12" $5,652.00 546# $5,340.00 525# N/A 14" $14,908.00 802# $11,768.00 753# $19,005.00 1075# 16" $16,172.00 1158# $15,726.00 1099# $20,674.00 1380# 18" $26,538.00 1410# $25,740.00 1343# $29,956.00 1560# 20" $31,764.00 1980# $30,912.00 1901# $37,604.00 2180# 24" $45,272.00 2880# $43,952.00 2772# $51,962.00 2835# 30" $93,704.00 4754# $89,597.00 4605# $119,796.00 5000# 36" $115,943.00 7440# $110,716.00 7217# $153,864.00 9000#

►Notes: 42" & 48" - POA and are available in MJ, FLG, & FLG X MJ * C561/C572 does not include bolts, nuts & gaskets for flange C561 gate valves are furnished with a hand wheel, unless otherwise specified. Bypass recommended on 14" & larger but mandatory on 30" & larger. Gearing recommended on 18" and larger but mandatory on 30" and larger. Horizontal valves 14" and larger require rollers, tracks and scrapers. SEE ADDERS FOR ABOVE NOTES ON PAGE 13

Sizes 3" - 12", 200# WWP, 400# TEST Sizes 14" - 48", 150# WWP, 300# TEST

Special coating other than standard - $36.00 per coat per inch for inside or outside

Indicator Posts Plates 4" - 12" $268.00 14" - 16" $694.00

Mitre Boxes POA

Page 11 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C500 DOUBLE DISC GATE VALVES Previous DD Page Back to table of contents. See Page 13 for DD Adders FIG C950/F5093 MJ X FLG FIG C950/F5093 MJ X FLG TAPPING VALVE WITH ACCESS TAPPING VALVE LESS ACCESS SIZE PRICE WEIGHT SIZE PRICE WEIGHT 3" $1,736.00 59# 3" $1,594.00 53# 4" $1,866.00 101# 4" $1,762.00 93# 6" $2,584.00 175# 6" $2,488.00 164# 8" $3,832.00 270# 8" $3,692.00 256# 10" $5,738.00 426# 10" $5,568.00 406# 12" $8,770.00 563# 12" $8,410.00 542# 14" $14,717.00 904# 14" $13,382.00 855# 16" $18,849.00 1217# 16" $18,354.00 1158# 18" $31,278.00 1437# 18" $30,394.00 1370# 20" $37,349.00 2063# 20" $36,392.00 1984# 24" $51,259.00 2838# 24" $49,798.00 2730#

FIG C571/F5067 MJ CUT-IN FIG C571/F5067 MJ CUT-IN WITH ACCESS LESS ACCESS SIZE PRICE WEIGHT SIZE PRICE WEIGHT 4" $1,658.00 106# 4" $1,552.00 90# 6" $2,256.00 176# 6" $2,088.00 167# 8" $3,498.00 266# 8" $3,310.00 250# 10" $5,458.00 415# 10" $5,184.00 375# 12" $6,886.00 522# 12" $6,546.00 514# NOTE: Figure C561 is furnished with a hand wheel, unless otherwise specified.

Page 12 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

DOUBLE DISC GATE VALVE OPTIONAL EQUIPMENT LIST ADDERS FOR DOUBLE DISC GATE VALVES

Back to Double Disc Gate Valves Back to table of contents. ENCLOSED BEVEL GEARS ** ENCLOSED SPUR GEARS HORIZONTAL GEAR CASE VERTICAL GEAR CASE SIZE PRICE SIZE PRICE 14" $8,480.00 14" $6,628.00 16" $8,480.00 16" $6,628.00 18" * $10,058.00 18" $7,623.00 20" * $10,441.00 20" $7,623.00 24" * $12,319.00 24" $8,897.00 30" $16,704.00 30" $11,646.00 36" $23,762.00 36" $17,580.00 42/48" POA 42/48" POA

** BEVEL GEAR ADDER INCLUDES ROLLERS, TRACKS, AND SCRAPERS Position Indicators and Stainless Steel Bolts and Nuts Priced on Availability

* If valves are 16" or larger, and are to be used in a horizontal position, rollers, tracks, and scrapers are recommended. Gears are not available on 30" and 36" Figure C566 (OS&Y).

NRS BY-PASS VALVES

VALVE SIZE PRICE BY-PASS SIZE 14" $4,970.00 2" 16" $4,970.00 3" 18" $5,715.00 3" 20" $5,715.00 3" 24" $7,617.00 4" 30" $8,463.00 4" 36" $11,492.00 6" 42" POA 8" 48" POA 8"

** Chain wheel Sprockets & Chain - FIGURE 197 Valve Chain Price of Wheel Price of Chain Size Wheel # PART # Per Wheel Per Foot PART # 2" # 2 445858P $362.00 $12.00 450693F 2 1/2" # 2 445858P $362.00 $12.00 450693F 3",4", 6" # 2 1/2 445860P $554.00 $12.00 450694F 8" # 3 445862P $658.00 $12.00 450694F 10", 12" #3 1/2 445864P $926.00 $12.00 450694F 14", 16" # 4 N/A $1,234.00 $12.00 18, 20" # 4 1/2 N/A $1,708.00 $12.00 24"- 30" # 5 N/A $2,106.00 $12.00 36"- 48" POA N/A POA POA

** When ordering, indicate either Wheel Diameter or size and figure number of valve

Page 13 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

RESILIENT WEDGE GATE VALVE OPTIONAL EQUIPMENT Back to table of contents.

NOTE: The following items are special and will be priced on application: Tagging, documentation, epoxy coating, limit switches, flanged protectors, end flange accessories, power operators (electric or cylinder), palletizing, export crating, and hand wheels on NRS valves other than flanged or screw end.

Add to list price of valve for each tapped hole in PERMANENT BOSS

2" through 4" $37.00 Prices for valves 6" and 8" $37.00 NOT furnished with 10" and 12" $37.00 permanent Boss are 14" and larger $37.00 priced on application.

Refer to catalog for maximum size taps and locations

LIST PRICE ADDERS:

STAINLESS STEEL BOLTS & NUTS SIZE 316SS 2" - 4" $99.00 6" $99.00 8" $189.00 10" $231.00 12" $322.00 14" $492.00 16" $492.00 18" $821.00 20" $880.00 24" $1,922.00 30" POA 36" POA

Page 14 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA BUTTERFLY VALVES WITH UNDERGROUND ACTUATORS W/OP-NUT Back to table of contents. Style 4500: 4" - 24" Style 1450: 30" - 48" (Sized for AWWA Class 150B ~ Table 1 ~ Torques)

4500-02 4500-01 Mechanical 4500-05 4500-13 FLG X MJ Size Flanged Weight* Joint with Access. Weight* Wafer Weight* W/Access Weight* 4" $1,105.00 75# $1,351.00 100# $1,314.00 55# 6" $1,138.00 95# $1,440.00 135# $1,347.00 65# $1,345.00 120# 8" $1,458.00 140# $1,796.00 185# $1,667.00 80# $1,699.00 160# 10" $2,010.00 232# $2,442.00 285# $2,219.00 145# 12" $2,408.00 300# $3,150.00 335# $2,617.00 180# $2,900.00 315# 14" $3,940.00 485# $5,432.00 580# $4,149.00 380# 16" $4,688.00 570# $6,260.00 670# $4,897.00 440# $5,708.00 645# 18" $5,265.00 735# $8,409.00 920# $5,474.00 570# 20" $7,085.00 860# $10,379.00 1065# $7,294.00 650# 24" $9,835.00 1165# $13,303.00 1475# $10,044.00 *Weights are approximate unit weights in lbs. ►Note: MJ Valves less accessories, use Flanged Price. 30" through 48" (Style 1450) - POA

AWWA BUTTERFLY VALVES WITH ABOVE GROUND ACTUATORS

Style 4500: 4" - 24" Style 1450: 30" - 48" (Hand Wheel Actuators sized for AWWA Class 150B ~ Table 1 ~ Torques)

HAND WHEEL **HAND LEVER 4500-02 4500-05 4500-02 4500-05 Size Flanged Weight* Wafer Weight* Flanged Weight* Wafer Weight* 4" $1,314.00 80# $1,314.00 60# $1,314.00 60# $1,314.00 40# 6" $1,347.00 100# $1,347.00 70# $1,347.00 85# $1,347.00 55# 8" $1,667.00 150# $1,667.00 100# $1,667.00 115# $1,667.00 65# 10" $2,219.00 242# $2,219.00 155# ** 1/4 Turn for Hand Lever Butterfly Valves 12" $2,617.00 310# $2,617.00 190# *Maximum Pressure Limitations for 14" $4,149.00 510# $4,149.00 405# Hand Lever Actuated 4500 BFV: 16" $4,897.00 595# $4,897.00 465# Water/Liquid Air/Gas 18" $5,474.00 760# $5,474.00 595# 8ft/sec. Max Flow 10,000ft/min Max Flow 20" $7,294.00 885# $7,294.00 675# 4" - 6" 200 PSI 4" - 6" 150 PSI 24" $10,044.00 1190# 8" -150 PSI 8" - 150PSI

30" & LARGER - POA CLASS 250 VALVE MJ & FLANGED - POA

BUTTERFLY VALVE ACCESSORIES CHAIN WHEELS Add to price of BFV with Hand wheel: Add for chain/foot Cylinder & Electronic 4" - 12" with14" Hand wheel $628.00 $7.00 Actuators are available on 14" - 24" with 18" Hand wheel $824.00 $9.00 all sizes - provide specs. Pricing on Availability

Page 15 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

TAPPING SLEEVES Back to table of contents. TAPPING SLEEVES TAPPING SLEEVES SQUARE SEAL - For Cast Iron Pipe MECHANICAL JOINT - WITH ACCESS. Compression type and single rectangular seal FIG. 957 for Asbestos Cement (CD) Pipe Complete Sleeve - FIG. 920 or 921 FIG. 960DIC for Cast Iron & Ductile Iron (AB) Pipe

SIZE PRICE SIZE PRICE 4 X 3" $1,422.00 4 X 4" $1,422.00 4 X 4 " $1,422.00 6 X 4" $1,691.00 6 X 3" $1,691.00 6 X 6" $1,691.00 6 X 4" $1,691.00 8 X 4" $2,077.00 6 X 6" $1,691.00 8 X 6" $2,077.00 8 X 3" $2,077.00 8 X 8" $2,249.00 8 X 4" $2,077.00 10 X 4" $4,109.00 *** 8 X 6" $2,077.00 10 X 6" $4,109.00 8 X 8" $2,249.00 10 X 8" $4,366.00 10 X 3" $4,109.00 10 X 10" $4,452.00 *** 10 X 4" $4,109.00 12 X 4" $4,109.00 *** 10 X 6" $4,109.00 12 X 6" $4,109.00 10 X 8" $4,366.00 12 X 8" $4,366.00 10 X 10" $4,452.00 12 X 10" $5,051.00 *** 12 X 3" $4,109.00 12 X 12" $5,192.00 12 X 4" $4,109.00 12 X 6" $4,109.00 *** Available for Figure 960DIC ONLY. 12 X 8" $4,366.00 12 X 10" $5,051.00 12 X 12" $5,192.00 FULL BODY MJ - POA

NOTE: ALL MJ TAPPING SLEEVES ARE PURCHASED FROM OTHER MANUFACTURERS

Page 16 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

ECCENTRIC PLUG VALVES Back to table of contents. Size F5412 Flanged F5413 MJ w/acc F5414 Grooved No Operator * No Operator * No Operator * 3" $686.00 $753.00 $686.00 4" $727.00 $794.00 $727.00 6" $1,246.00 $1,341.00 $1,246.00 8" $1,737.00 $1,872.00 $1,737.00 10" $2,570.00 $2,772.00 $2,570.00 12" $3,373.00 $3,649.00 $3,373.00 14" $4,947.00 $5,292.00 16" $6,923.00 $7,407.00 18" $10,333.00 $10,891.00 20" $14,956.00 $15,651.00 24" $26,648.00 $29,711.00 *3" Flanged and Grooved valves come standard with levers. Operating nuts are available. Worm gearing recommended on 6" with 75 PSI or more and 8" with 60 PSI or more. (See Pg. 18) 10" - 24" must add price of worm gear actuator. Actuator is recommended on 6" above

Notes: All non-geared valves are furnished with op-nuts. ► Lever wrench heads are available for 4" - 8" non-geared valves with op-nuts. ► Lever actuators can only be used for pressure ratings of 100 PSI maximum and 25 PSI in reverse flow condition. ► It is recommended that valves be configured with geared actuators if installed in pipelines with high velocity flows or where water hammer conditions exist. Lever actuators can only be used for pressure ratings of 100 PSI maximum and 25 PSI in the reverse flow condition. ► Worm gears recommended on all buried service valves. ► For MJ valves less accessories ~ use flanged list price

Adders: Lever Wrench Head $43.00 Part Number M1300490 Special coating $18.00 Per inch per coat

CHAIN LEVER OPERATOR (For 4" - 8" valves without actuators) SIZE PSI Price Part # Size of Handles on each side 4" 0 - 75 $265.00 A1300653 9" 6" 0 - 75 $272.00 A1300656 17" 8" 0 - 60 $272.00 A1300656 17" ►Note: Chain for above PC# T0800062 - $6.00. per foot

CHAIN WHEEL (Add to price of actuator and hand wheel) Hand wheel Size Price 304 Stainless Steel Bolts & Nuts for Plug Valve 10" $331.00 4" - 6" $40.00 18" $553.00 8" $56.00 24" $1,017.00 10" - 12" $78.00 30" $1,255.00 14" - 24" $254.00 ►Note: Chain for above PC# T0800062 - $6.00. per foot ►Note: 316 Stainless Steel bolts & nuts are POA.

Page 17 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

WORM GEAR ACTUATORS Add to price of plug valve. (See page 17) Back to table of contents. Worm Gear Actuator Section Chart For In-Plant Valves (above ground w/hand wheel) Back to table of contents. Differential Pressure Across Valve (PSI) Worm Gear Size 0-25 26-50 51-75 76-100 101-125 126-150 151-175 Pricing 4" A110 A110 A110 A110 A110 A110 A110 A110 $817.00 6" A110 A110 A110 A110 A110 A110 A110 A118 $948.00 8" A110 A110 A110 A110 A110 A110 A110 A924 $2,637.00 10" A118 A118 A118 A118 A118 A118 A118 A930 $2,730.00 12" A118 A118 A118 A118 A118 A118 A118 A1024 $3,313.00 14" A924 A924 A924 A924 A924 A930 A1030 $4,347.00 16" A1024 A1024 A1024 A1024 A1024 A1624 A1624 $5,035.00 18" A1024 A1024 A1024 A1024 A1030 A1624 A1630 $9,608.00 20" A1024 A1024 A1024 A1030 A1624 A1624 24" A1024 A1024 A1030 A1624 A1630 A1630

A110 1KE/10" Hand wheel A1024 10KE2.5/24" Hand wheel A118 1KE/18" Hand wheel A1030 10KE2.5/30" Hand wheel A924 9KE/24" Hand wheel A1624 10KE6/24" Hand wheel A930 9KE/30" Hand wheel A1630 16KE/30" Hand wheel

Worm Gear Actuator Section Chart for Underground Valves (buried w/op-nut)

Differential Pressure Across Valve (PSI) Worm Gear Size 0-25 26-50 51-75 76-100 101-125 126-150 151-175 Pricing 4" U10N U10N U10N U10N U10N U10N U10N U10N $872.00 6" U10N U10N U10N U10N U10N U10N U10N U90N $2,676.00 8" U10N U10N U10N U10N U10N U10N U10N U100N $4,027.00 10" U10N U10N U10N U10N U10N U10N U10N U160N $9,747.00 12" U10N U10N U10N U10N U10N U10N U10N 14" U90N U90N U90N U90N U90N U90N 16" U90N U90N U90N U100N U100N U100N 18" U100N U100N U100N U100N U100N U100N 20" U100N U100N U100N U100N U100N U100N 24" U100N U100N U100N U160N U160N U160N

U10N 1KE/Op nut Buried Service U90N 9KE/Op nut Buried Service U100N 10KE2.5/Op nut Buried Service U160N 16KE/Op nut Buried Service

Notes: ► It is important to use ACTUAL PRESSURE when possible. Under sizing is not recommended and over sizing is expensive. ► IN-PLANT prices include indicator and hand wheel. ► Underground Prices include operating nut and buried service cover. ► ALL IN-PLANT actuators are sized for no more than 80lbs pull on hand wheel. ► ALL UNDERGROUND actuators are sized for input torque of no more than 150 ft-lbs on the Op. Nut. ► Price on application for valves requiring submerged service, special paint or 316 stainless steel hardware. ► Epoxy adder - $18.00 list per inch/coat

Page 18 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA SWING CHECK VALVES - IRON BODY & BRONZE MOUNTED Back to table of contents. FIG. 1106 - Flanged with Bronze Faced or FIG.1106LS - FLG - Lever & Spring Bronze Faced or FIG. 1106A - Flanged with Rubber Faced Disc FIG.1106LW - FLG - Lever & Weight Bronzed Faced or FIG.1106AS or FIG. 1106AW - Spring or Weight with Rubber Disc

VALVE PRICE WEIGHT VALVE PRICE LS & AS LW & AW SIZE SIZE WEIGHT WEIGHT 2" $1,090.00 35# 2" $1,916.00 39# 39# 2 1/2" $1,376.00 50# 2 1/2" $2,024.00 54# 54# 3" $1,376.00 61# 3" $2,199.00 65# 65# 4" $1,700.00 119# 4" $2,590.00 128# 128# 6" $2,553.00 190# 6" $3,484.00 201# 201# 8" $3,737.00 347# 8" $5,280.00 370# 370# 10" $6,706.00 566# 10" $8,473.00 600# 600# 12" $10,497.00 774# 12" $12,184.00 812# 812# 14" $14,845.00 1080# 14" $16,863.00 1150# 1150# 16" $20,120.00 1590# 16" $22,015.00 1630# 1630# 18" $29,799.00 1890# 18" $31,092.00 1835# 1835# 20" $34,768.00 2450# 20" $36,657.00 2470# 2470# 24" $49,595.00 3310# 24" $50,889.00 3415# 3415# 30" N/A 30" POA

CHECK VALVES ARE AVAILABLE WITH LIMIT SWITCHES NET ADDER FOR LIMIT SWITCH (ALLEN BRADLEY) - $577.50 (3"-12"); $1,386.00 (14"-24")

SPECIAL LAY LENGTH CHECK VALVE

FIG. 1107LS or Fig. 1107LW - Flanged - Lever & Spring or Lever & Weight Bronze Faced FIG. 1107AS or Fig. 1107AW - Flanged - Lever & Spring or Lever & Weight Rubber Faced

VALVE PRICE LS & AS LW & AW SPECIAL SIZE WEIGHT WEIGHT LAY LENGTH 2 1/2" $2,025.00 54# 54# 10" 3" $2,199.00 65# 65# 10 1/4" 4" $2,591.00 128# 128# 13" 6" $3,485.00 201# 201# 16" 8" $5,282.00 370# 370# 19" 10" $8,473.00 600# 600# 22" 12" $12,185.00 812# 812# 26"

Page 19 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

Page 19 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA SWING CHECK VALVES - IRON BODY & BRONZE MOUNTED * Epoxy Coating I.D. and O.D. Now Standard on All Check Valves Back to table of contents. AWWA CUSHIONED CHECK VALVES - IRON BODY & BRONZE MOUNTED

1206A Flanged, rubber faced disc with Lever and Weight Only 1206 Flanged, with bronze faced disc with Lever and Weight Only

SIZE PRICE WEIGHT 1206 WEIGHT 1206A

3" $5,065.00 90# 92# 4" $5,841.00 150# 157# 6" $6,551.00 226# 226# 8" $8,441.00 402# 412# 10" $12,291.00 613# 625# 12" $17,795.00 862# 876# ►Note: Must denote horizontal or vertical application at time of order.

INCREASING TYPE CHECK VALVES - FLANGED & RUBBER FACED ONLY

SIZE Style 1306A Style 1306AW Style 1306AS Lever & Weight Lever & Spring 4" x 6" $2,659.00 $3,712.00 $3,712.00 4" x 8" $2,714.00 $3,737.00 $3,737.00 6" x 8" $3,460.00 $4,881.00 $4,881.00 6" x 10" $3,551.00 $4,975.00 $4,975.00 8" x 10" $7,413.00 $9,451.00 $9,451.00 8" x 12" $7,861.00 $9,891.00 $9,891.00 10" x 12" $10,180.00 $12,880.00 $12,880.00

KENFLEX RESILIENT HINGED CHECK VALVE FIGURE 506 AND 506J

SIZE PRICE 316 STAINLESS STEEL Jackscrew for 506J back flush - POA. BOLTS & NUTS ADDER Position Indicator - POA. 4" $595.00 $41.00 Jackscrew Part Numbers: 6" $942.00 $85.00 8" $1,504.00 $100.00 4" 448004P 10" $2,696.00 $116.00 6" & 8" 448006P 12" $4,096.00 $140.00 10" & 12" 448010P

ADDERS FOR IPT TAPS VALVE MAXIMUM PRICE SIZE TAP 2 1/2" 3/4" $90.00 3 3/4" $90.00 4 1" $90.00 6 1 1/4" $98.00 8 2" $108.00 10 2" $108.00 12 2" $108.00

Page 20 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

MUD VALVES (IRON BODY BRONZE MOUNTED) Back to table of contents.

FLANGED END A25600 NRS A25612 Rising Stem Size 2721-20 Weight 2721-20 Weight 3" $645.75 40# N/A 4" $650.55 45# $908.94 35# 6" $722.10 55# $983.91 50# 8" $944.79 95# $1,255.25 85# 10" $1,488.06 130# $2,032.65 115# 12" $1,734.39 195# $2,677.83 180# 14" $3,502.50 240# N/A 16" $4,200.99 280# $4,405.01 245# 18" $4,734.54 350# $5,238.98 330# 20" $5,222.01 450# N/A 24" $6,652.74 635# N/A

FLAP VALVES (IRON BODY BRONZE MOUNTED) Size A2540-6 Flanged 2711-20 Weight 4" $388.59 26# 6" $473.39 35# 8" $754.97 48# 10" $1,024.56 88# 12" $1,151.21 140# 14" $2,539.95 156# 16" $2,940.95 183# 18" $3,697.04 274# 20" $4,600.70 320# 24" $6,003.33 480# 30" $12,822.77 750#

PRESSURE RELIEF VALVES A2550RS A2580 4" 191001 Floor PRV C. I. Hydrostatic Pressure Wall PRV with Flanged Ends 6" 192001 Relief Valve with Rubber Seats Wall Pipe with Grate Size Price SIZE PRICE SIZE PRICE 4"X8" $139.26 4" $225.54 4" Dia X 12" Length $186.80 4"X12" 150.18 6" $336.36 4" Dia X 16" Length $197.67 4"X16" 160.06 4" Dia X 20" Length $211.31 4"X24" 182.91 6 Dia X 12" Length $209.16 6"X8" $300.32 6 Dia X 16" Length $268.17 6"X12" 313.97 6 Dia X 20" Length $305.85 6"X16" 324.87 6"X24" 349.2

Special coatings other than standard - $17.47/coat/inch for inside or outside All cast iron components coated with NSF approved two part epoxy. All valves on this page are also available in stainless steel and are priced on availability.

Page 21 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

SHEAR GATES (IRON BODY BRONZE MOUNTED) Back to table of contents.

A25206 Flanged End Size 2701-20 Weight 4" $569.37 24# 6" $654.86 32# 8" $866.06 51# 10" $1,125.14 82# 12" $1,435.55 117# 14" $3,815.84 187# 16" $4,005.71 306# 18" $4,482.09 372# 20" $6,241.34 425# 24" $7,994.88 610# 30" $10,523.36 1175#

Above Price include pull rods up to 2' 0" long

Custom length pull rods are priced as follows: Base price for 2' 0" pull rod (net) $35.70 Each additional foot (net per each) $5.75

All cast iron components coated with NSF approved two part epoxy.

A130 - Minimum length lifting handle required 4" - 6" 2' 0" 12" - 14" 4' 0" 8" - 10" 3' 0" 16"- 20" 5" 0" 24" - 30" 6' 0"

Special coatings other than standard - $18.00 per coat per inch for inside or outside

Page 22 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

EXTENSION STEMS Back to table of contents. MUD VALVES EXTENSION STEM DIAMETER GATE VALVE EXTENSION STEM DIAMETER VALVE DIAMETER VALVE DIAMETER SIZE EXT. STEM SIZE EXT. STEM 2" 1" 2 1/2" 1" 3" 1" 4" 1 1/8" 4" 1" 6" 1 1/8" 6" 1 1/8" 8" 1 1/4" 8" 1 1/4" 10" 1 1/4" 10" 1 3/8" 12" 1 1/4" 12" 1 1/2" 14" 1 1/4" 14" 1 3/4" 16" 1 3/8" 16" 1 3/4" 18" 1 3/8" 18" 1 3/4" 20" 1 1/2" 20" 1 7/8" 24" 1 1/2" 24" 2" 30" 1 3/4" 30" 2 1/4" 36" 2" 36" 2 1/4" ►Note: For valves with Gearing - Contact Plant

VALVE EXTENSION STEMS - 2" SOCKET INDIVIDUAL PARTS Stem First 5' Extra per 12" Diameter w/OP nut or HW or Fraction of ITEM PART # PRICE STEEL STEEL 1" $195.02 $11.75 2" COUPLING FOR OP-NUT M128102 $62.67 1 1/8" $212.87 $13.42 2" WRENCH NUT (EXT. STEM) M179289 $47.70 1 1/4" $231.50 $16.50 HAND WHEEL 13" M176795 $69.58 1 3/8" $255.53 $19.83 SLEEVE CPLG (EXT STEM) M178020 $71.45 1 1/2" $271.07 $23.67 SLEEVE CLPG 304 SS M178020SS $137.10 1 3/4" $361.53 $32.25 YOKE CPLG (4-14 MUD VLV) M176782 $57.50 1 7/8" $383.60 $37.67 2" $443.20 $50.58 Plug Valves and Butterfly Valves require 2 1/4" $461.40 $52.58 1 1/4" Extension stems ►Note: Price includes extension operator - 2" op-nut or 13" hand wheel, or stem coupling with valve coupling for attachment to floor stand. Stainless steel extension stems are available in 304 or 316 stainless steel and priced on availability.

FLOOR STANDS A25650 Standard pattern, non-indicating, non-rising stem, with hand wheel $695.52 A25655 Standard pattern, indicating, non-rising stem, indicating with hand wheel up to 72 turns $900.90 A25655/144 Standard pattern, non-rising stem, indicating with hand wheel up to 144 turns $1,138.47 A25655/288 Standard pattern, non-rising stem, indicating with hand wheel up to 288 turns $1,369.67 Geared floor stand POA ►Note: Pricing on indicating floor stands includes coupling and steel stem extending 17" below base of floor stand. All floor stands are also available in stainless steel and are priced on availability.

SIZE WEIGHT PRICE FLOOR BOXES A25700B 8" - 12" 35# $141.75

STEM GUIDES SIZE: # 1 # 2 # 3 T Handle Wrench 5' POA Minimum: 2 1/2" 15" 24" Each Additional Foot POA Maximum: 17" 24" 35" Price: $156.86 $156.86 $235.29 Maximum stem Diameter: 2 1/4" 2 3/4" 2 3/4" Part Number: A25680S A25680L A25680XL Recommend use of Stem Guide every 10 feet.

Page 23 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

K81 HYDRANT EXTENSIONS/ PARTS Back to table of contents. EXTENSION KITS Item # Size 5 1/4" Part Number K-8150 6" $787.00 1585006R2X81DDI 12" $919.00 1585012R2X81DDI 18" $1,043.00 1585018R2X81DDI 24" $1,133.00 1585024R2X81DDI 30" $1,665.00 1585030R2X81DDI 36" $1,786.00 1585036R2X81DDI 42" $1,860.00 1585042R2X81DDI 48" $2,213.00 1585048R2X81DDI 54" $2,383.00 1585054R2X81DDI 60" $2,426.00 1585060R2X81DDI Size 4 1/2" Part Number 6" $705.00 1583006R2X81DDI 12" $828.00 1583012R2X81DDI 18" $888.00 1583018R2X81DDI 24" $976.00 1583024R2X81DDI 30" $1,620.00 1583030R2X81DDI 36" $1,740.00 1583036R2X81DDI 42" $1,755.00 1583042R2X81DDI 48" $1,848.00 1583048R2X81DDI 54" $2,000.00 1583054R2X81DDI 60" $20,043.00 1583060R2X81DDI

EXTENSION PARTS

INCLUDED IN ALL EXTENSIONS PART# COST ALL INTERNAL PARTS QTY. COST: $183.00 1 EXTENSION COUPLING 440776P $108.60 2 COUPLING PIN 443022P $20.33 PART# 158412581EKITLSS 1 O-RING 441664P $21.87 2 GASKET 441803P $21.17 (Does not include Spool or Stem) 8 NUT (each) 442482P $4.14 8 BOLT (each) 444331P $8.25 1 SPOOL POA 1 STEM POA

6" EXTENSION 12" EXTENSION 18" EXTENSION SPOOL 41/2 2315602 SPOOL 41/2 2315612 SPOOL 41/2 2315622 SPOOL 51/4 2315702 SPOOL 51/4 2315712 SPOOL 51/4 2315722 STEM 3199792 STEM 3199802 STEM 3199812

24" EXTENSION 30" EXTENSION 36" EXTENSION SPOOL 41/2 2315632 SPOOL 41/2 2315642 SPOOL 41/2 2315652 SPOOL 51/4 2315732 SPOOL 51/4 2315742 SPOOL 51/4 2315752 STEM 3199832 STEM 3199842 STEM 3199872

42" EXTENSION SPOOL 41/2 2315662 SPOOL 51/4 2315762 STEM 3199873

Page 24 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

GUARDIAN FIRE HYDRANT PARTS K81D & K81A Back to table of contents. Page 2 of Hydrant Parts Item # Description 4 1/2" Part # 5 1/4" Part # K-8101 Alemite Fitting $ 7.00 441670P $ 7.00 441670P K-8102 Operating Stem Nut O/L Pent. 1 1/2" $ 243.00 3199502 $ 243.00 3199502 K-8103 Dirt Shield - O/L (Specify Color) $ 38.00 3212132 $ 38.00 3212132 Dirt Shield - O/R (Specify Color) $ 38.00 321213R $ 38.00 321213R K-8104 Stem Lock Nut $ 75.00 3185944 $ 75.00 3185944 **K-8105 O-Ring (Stem Nut) $ 11.00 442704P $ 11.00 442704P K-8106 Thrust Washer $ 4.00 445843P $ 4.00 445843P K-8107 Hydrant Cap (specify color when ordering) $ 370.00 3313922 $ 386.00 3185962 K-8108 Cap Bolts (8 req. ea. 4 1/2") price per each $ 7.00 444352P Cap Nuts (8 req. ea. 4 1/2") price per each $ 3.00 477495P Cap Bolts (6 req. ea. 5 1/4") price per each $ 7.00 444358P Cap Nuts (6 req. ea. 5 1/4") price per each $ 3.00 477497P *K-8109 Cap Gasket $ 22.00 441799P $ 22.00 441803P *K-8109-O Cap O-Ring (2009 models and above) $ 22.00 442772P $ 22.00 442794P K-8110 Stem Ferrule is an integral part of the upper stem - not available as a separate part *K-8111 O-Ring (Cap) (2 req.) $9.00 442644P $9.00 442644P K-8112 O-Ring (Stem Ferrule) is an integral part of the upper stem - not available as a separate part **K-8114 Upper Stem O/L $ 223.00 2310192 $ 223.00 2310192 Upper Stem O/R $ 223.00 2310193 $ 223.00 2310193 K-8115 Upper Barrel K81D (3 way) specify color $ 892.00 3187732 $ 1,089.00 3188022 Upper Barrel K81D (2 way) specify color $ 892.00 3187742 $ 1,089.00 3188052 Upper Barrel K81A (3 way) specify color $ 892.00 3313932 $ 1,089.00 3187522 Upper Barrel K81A (2 way) specify color $ 892.00 3187552 $ 1,089.00 3187432 K-8116 Stem Breaking Coupling $ 108.00 318563P $ 108.00 318563P K-8118 Breaking FLG. Bolts (8 req.) price each $ 9.00 444331P $ 9.00 444331P Breaking FLG. Nuts (8 req.) price each $ 5.00 442482P $ 5.00 442482P K-8119 Breaking Ring (2 req.) price each $ 58.00 340413B $ 58.00 340415B K-8120 O-Ring (Standpipe) $ 22.00 441666P $ 22.00 441664P K-8122R Coupling Pins (2 req.) price each $ 18.00 443022P $ 18.00 443022P K-8123 Lower Stem 5' 0" Trench or less $ 223.00 *** $ 223.00 *** ADD for each additional 6" increase of depth $ 21.00 *** $ 21.00 *** K-8124 Lower Barrel 5' 0" Trench or less $ 1,089.00 *** $ 1,089.00 *** ADD for each additional 6" increase of depth $ 129.00 *** $ 129.00 *** *K-8125 Elbow Flat Gasket $ 22.00 441801P $ 22.00 441805P *K-8125-O Elbow O-Ring (2009 models and above) $ 22.00 442793P $ 22.00 442767P *K-8126A O-Ring (Upper Seat) $ 12.00 442660P $ 12.00 442658P K-8126B O-Ring for 4 1/2" MVO only $ 10.00 442789P N/A N/A K-8127 Seat Ring Insert for 4 1/2" MVO only $ 141.00 3313962 N/A N/A *K-8128 Seat Ring $ 251.00 3313962 $ 317.00 3196772 K-8129 Drain Tube (2 req.) price per each $ 7.00 440557P $ 7.00 440557P K-8130 O-Ring (Lower Seat) $ 12.00 442785P $ 12.00 442740P K-8131 Main Valve $ 148.00 445906P $ 179.00 445904P K-8132 Bottom Plate $ 80.00 3185805 $ 103.00 3316399 K-8133 Drain Valve Pin $ 18.00 442950P $ 18.00 442949P K-8134 4" MJ Elbow for 4 1/2" MVO only $ 708.00 2316423 N/A N/A 4" FL Elbow for 4 1/2" MVO only $ 708.00 3316432 N/A N/A K-8134 6" MJ Elbow $ 862.00 2313916 $ 1,251.00 2215632 6" Flanged Elbow $ 862.00 2310192 $ 1,251.00 2200025 6" Tyton Elbow $ 862.00 2310235 $ 1,251.00 2310235 K-8135 Elbow SS Bolts (8 req. Ea.) price per each $ 10.00 460032P $ 10.00 460241P Elbow SS Nuts (8 req. Ea.) price per each $ 3.00 460218P $ 3.00 460212P * Recommend Spare Parts ** Need Direction of Open *** Part Number Changes Based on Specs. (Nut size, trench depth, end conj., thread spec. etc.

Page 25 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

GUARDIAN FIRE HYDRANT PARTS K81D & K81A Page one of K81 Parts Back to table of contents. Item # Description 4 1/2" Part # 5 1/4" Part # K-8136 Drain Valve $ 200.00 2313992 $ 280.00 2316152 K-8137 Drain Valve Facing $ 25.00 443404P $ 25.00 443404P K-8138 S-Hook - Chain to Upper $ 10.00 442159P $ 10.00 442159P K-8139 Chain w/Bands - 3 Way $ 36.00 440711P $ 36.00 440711P K-8139 Chain w/Bands - 2 Way $ 32.00 440712P $ 32.00 440712P K-8140 Hose Nozzle (each) 2 1/2" NST - 3187382 $ 138.00 *** $ 138.00 *** *K-8141 Nozzle Retaining Set Screw (no charge item with nozzle) $ 7.00 443500P $ 7.00 443500P K-8142 Steamer Nozzle (Pumper) $ 303.00 *** $ 303.00 *** Part codes for NST pumper nozzles  4 1/2" NST - 3194772 4" NST - 3194782 K-8143 Nozzle Cap Gasket - 2 1/2" Hose $ 10.00 441790P $ 10.00 441790P Nozzle Cap Gasket - 4 1/2" Steamer $ 19.00 441796P $ 19.00 441796P Nozzle Cap Casket - 4" Steamer $ 19.00 441794P $ 19.00 441794P K-8144 Nozzle Cap 2 1/2" NST (specify color when ordering) $ 87.00 3200212 $ 87.00 3200212 Nozzle Cap 4" (specify color when ordering) NST $ 210.00 3200222 $ 210.00 3200222 Nozzle Cap 4 1/2" NST (specify color when ordering) $ 210.00 3200232 $ 210.00 3200232 K-8145 O-Ring (Hose 2 1/2") (no charge item with nozzle) $ 5.00 442788P $ 5.00 442788P O-Ring (Steamer 4" - 4 1/2") (no charge item with nozzle) $ 12.00 442790P $ 12.00 442790P K-8146 Allen Screw (Set Screw for Stem Lock Nut) $ 5.00 444438P $ 5.00 444438P K-8147 Seat Removing Wrench $ 451.00 446070P $ 451.00 446070P Wrench Nut O/L $ 85.00 3145254 $ 85.00 3145254 Wrench Nut O/R $ 85.00 3145255 $ 85.00 3145255 K-8148 Nozzle Wrench (Hose) 2 1/2" $ 149.00 3310372 $ 149.00 3310372 Nozzle Wrench (Hose) 2 1/4" $ 149.00 3310374 $ 149.00 3310374 Nozzle Wrench (Steamer) 4" $ 182.00 3310392 $ 182.00 3310392 Nozzle Wrench (Steamer) 4 1/2" $ 182.00 3310382 $ 182.00 3310382 K-8155 Stop Nut Wrench $ 300.00 446131P $300.00 Nevestane Grease 12 oz. Cartridge $ 30.00 441636T $30.00

* Recommended Spare Parts ** Need Direction of Open *** Part Number Changes Based on Specs. (Nut size, trench depth, end conj., thread spec. etc.)

K-8151 K81 Main Valve Kit - 4 1/2" $ 383.00 1583MVRKRNC K81 Main Valve Kit - 5 1/4" $ 510.00 1585MVRKRNC ►NOTE: Kit includes seat ring, main valve, upper and lower seat o-rings, and bottom plate.

K-8152 K81 Elbow Repair Kit - 4 1/2" $ 386.00 1583ERKRNC K81 Elbow Repair Kit - 5 1/4" $ 440.00 1585ERKRNC ►NOTE: Kit includes elbow gasket, main valve upper and lower seat o-rings, and bottom plate, drain valve facing, all bolts & nuts for the elbow and Nevastane grease.

K-8149 Collision Repair Kit - 4 1/2" $ 356.00 1583C00R1X81ZB Collision Repair Kit - 5 1/4" $ 356.00 1585C00R1X81ZB ►NOTE: Kit includes 2 breaking rings, 2 coupling pins, one coupling, and one gasket

K-1853 Bonnet Replacement Kit - 4 1/2" $ 975.00 1583BREPLKRNC Bonnet Replacement Kit - 5 1/4" $ 1,050.00 1585BREPLKRNC ►NOTE: Kit includes op-nut w/o-ring & thrust washer, dirt shield, upper stem, stem lock nut & set screw, hydrant dome w/o-rings, bolts & nuts, and one tube Nevestane grease. Important: Please specify color on all orders.

Upper Standpipe Complete - From ground line up: 4 1/2" 5 1/4" 2 hose only $1,447.00 $1,704.00 2 hose and 1 steamer only $1,787.00 $2,118.00 ►NOTE: (If dome assembly is not required, deduct 180.00 from list)

Page 26 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" FIGURE K10 STANDARD FIRE HYDRANT PARTS (DISCONTINUED HYDRANT) Back to table of contents. Parts Continued ► Item # Description Part # Price K 1001 Cap bolt with nut each (2 Per) (B)-444364P/(N)-442484P $ 15.00 K1002/3/4 Operating stem nut with "O " Rings & Alemite fitting 3186082/1 1/2"P or need specs $ 345.00 K 1003 Alemite Fitting 441670P $ 7.00 K 1004/10 "O" Ring weather pressure seal (set of 2) 442650P $ 21.00 K 1005 Cap (need direction to open & color) 3185952(Need Wet Top or DT) $ 413.00 K 1006 Lock nut set screw only (Allen head) 444438P $ 5.00 K 1006/7 Lock nut w/ set screw and thrust washer 3185943(LN)445843P(TW)444438P(SS) $ 81.00 K 1008 Cover Plate (Wet Top) 3185922 $ 206.00 K 1009 Cover Plate bolts and nuts (each) (4 per) (B)-444358P/(N)-442484P $ 15.00 K 1011 Cover Plate Gasket 441803P $ 22.00 K 1013 Hose nozzle cap gasket 441790P - 2 1/2" $ 10.00 K 1013 Steamer nozzle cap gasket 441794P - 4"/441796P - 4 1/2" $ 19.00 K 1014 Hose nozzle (2 1/2" NST 3186442) or Provide size & specs $ 137.00 K 1014 Steamer nozzle (4 1/2" NST 3196752) or Provide size & specs $ 278.00 K 1016 Nozzle screw 444284P $ 9.00 K 1017 Nozzle Cap Chain - For 2 Hose Nozzles 440712P $ 32.00 K 1017 Nozzle Cap Chain - 2 Hose & 1 Steamer 440711P $ 36.00 K 1018 Upper Standpipe section (Provide MVO) (3W) - 3187082/(2W) - 3187032 $ 1,222.00 K 1019 Standpipe bolt w/ nut (each) (8 per) (B)-444358P/(N)-442484P $ 16.00 K 1020 Standpipe gasket 441805P $ 22.00 K 1021 & Stem w/ wrench guide & set screw: Need DTO & Trench Depth $ - K 1022 & For 5' Trench of less (wet top) Need DTO & Trench Depth $ 350.00 K 1023 ADD for each 6" increase Need DTO & Trench Depth $ 23.00 K 1022 Wrench Guide Only 3185572 $ 20.00 K 1023 Wrench Guide Set Screw Only 444159P $ 5.00 K 1024 Lower Standpipe Section: Provide Trench Depth $ - For 5' Trench of less Provide Trench Depth $ 1,516.00 ADD for each 6" increase Provide Trench Depth $ 146.00 K 1025/26 Drain Valve w/facing & rivets only (5 1/4") - 2185972/(4 1/2") - 2185782 $ 268.00 K 1025 Drain Valve facing & rivets pair (5 1/4)442230P/(4 1/2)442232P/444528P(R) $ 32.00 K 1027 Elbow Bolt & Nut (each) (8 Per) (B)-444358P/(N)-442484P $ 16.00 K 1028 Elbow Gasket 441805P $ 22.00 K 1029 Seat Ring (5 1/4") - 3185982/(4 1/2") - 3185792 $ 352.00 K 1030 Seat Ring Gasket (5 1/4") - 441820P/(4 1/2") - 441832P $ 30.00 K 1031 Drain Valve Key only 442218P $ 7.00 K 1032 Top Plate (5 1/4"only) 3185992 $ 83.00 K 1033 Main Valve (Neoprene) (5 1/4") - 445904P/(4 1/2") - 445776P $ 179.00 K 1034 Bottom Plate (5 1/4") - 3316363/(4 1/2") - 3185805 $ 105.00 Thrust washer 445843P $ 10.00 Hose nozzle cap (2 1/2"NST- 3200212) or Provide specs $ 97.00 Steamer Nozzle Cap (4 1/2"NST- 3200232) or Provide specs $ 245.00 K 1015 Upper Standpipe section (Ground line up): Provide specs $ - With 2 hose nozzles inserted w/caps, chain, & gaskets $ 1,951.00 With 2 hose & 1 Steamer inserted w/caps, chain, & gaskets $ 2,364.00 K 1036 Elbow drain tubing only (each) 440577P $ 7.00 K 1035 Elbow with Drain tubing only: $ - 4" MJ or Flanged (4 1/2" only) Part # available on request $ 1,251.00 6" MJ or Flanged Part # available on request $ 1,251.00 K 1012 S Hook 442159P $ 8.00

Page 27 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" K10 DRY TOP FIRE HYDRANT PARTS (DISCONTINUED HYDRANT) ◄ Back One Page Back to table of contents. Parts Continued ►

Description Price Bronze to Bronze Seating Elbow with drain tubing & bronze insert: 4" & 6" Bell, & 6" Tyton N/A 4" MJ or Flanged (for 4 1/2" only) $ 1,251.00 6" MJ or Flanged $ 1,251.00 Elbow Bolt with nut 3" long (each) $ 19.00 $ - Dry Top Model $ - Cover Plate with "O" Ring (CP) 3198703/(O-ring) 442644P $ 228.00 Stem with Brass Ferrule, wrench guide & set screw Need DTO & Trench Depth $ - For 5' Trench Need DTO & Trench Depth $ 402.00 ADD for each 6" increase Need DTO & Trench Depth $ 23.00 Operating stem nut with "O" rings and alemite fitting Provide Size, shape, & DTO $ 356.00 "O" Rings only (set of 3) 442650P-(2 req)/442644P-(1 req) $ 34.00

Page 28 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" FIGURE K10B SAFE TOP FIRE HYDRANT WITH BREAKING NUT PARTS (DISCONTINUED HYDRANT) ◄ Back One Page Back to table of contents. Parts Continued ►

Item # Description Part # Price K 1001 Cap bolt with nut each (2 Per) (B)-444364P/(N)-442484P $ 15.00 K1002/3/4 Operating stem nut with "O " Rings & Alemite fitting 3186082/1 1/2"P or Provide specs $ 345.00 K 1003 Alemite Fitting 441670P $ 7.00 K 1004/10 "O" Ring weather seal (set of 2) 442650P $ 21.00 K 1005 Cap (need direction to open & color) 3185952 $ 413.00 K 1006 Lock nut set screw only 444438P $ 5.00 K 1007 Lock nut w/ set screw and thrust washer (LN)3185943(TW)445843P(SS)444438P $ 81.00 K 1008B Cover Plate (Wet Top) 3185922 $ 206.00 K 1009 Cover Plate bolts and nuts (each) (4 per) (B)-444358P/(N)-442484P $ 15.00 K 1011 Cover Plate Gasket 441803P $ 22.00 K 1013 Hose nozzle cap gasket (2 1/2") 441790P $ 10.00 K 1013 Steamer nozzle cap gasket (4") 441794P/(4 1/2") 441796P $ 19.00 K 1014 Hose nozzle (NST-3186442) or Provide size, & specs $ 137.00 K 1014 Steamer nozzle (4 1/2"NST -3196752) or Provide size, & specs $ 278.00 K 1016 Nozzle screw 444284P $ 9.00 K 1017 Nozzle Cap Chain - For 2 Hose Nozzles 440712P $ 32.00 K 1017 Nozzle Cap Chain - 2 Hose & 1 Steamer 440711P $ 36.00 K 1018 Upper Standpipe section (3W) 3187083/(2W) 3187033 $ 1,222.00 K 1023 Wrench Guide Only 3185572 $ 20.00 K 1024 Wrench Guide Set Screw Only 444159P $ 5.00 K 1025 Lower Standpipe Section: Need DTO & Trench Depth $ - For 5' Trench of less Need DTO & Trench Depth $ 1,516.00 ADD for each 6" increase Need DTO & Trench Depth $ 146.00 K 1027 Drain Valve w/facing & rivets only (4 1/2") 2185782/(5 1/4") 2185972 $ 268.00 K 1026A Drain Valve facing & rivets pair (4 1/2")442232P(5 1/4")442230P(R)444528P $ 32.00 K 1028 Elbow Bolt & Nut (each) (8 per) (B)-444358P/(N)-442484P $ 16.00 K 1029 Elbow Gasket 441805P $ 22.00 K 1030 Seat Ring (4 1/2") 3185792 (5 1/4") 3185982 $ 352.00 K 1031 Seat Ring Gasket (4 1/2") 441832P (5 1/4") 441820P $ 30.00 K 1032 Drain Valve Key only 442218P $ 7.00 K 1033 Top Plate (5 1/4"only) 3185992 $ 83.00 K 1034 Main Valve (Neoprene) (4 1/2") 445906P (5 1/4") 445904P $ 179.00 K 1035 Bottom Plate (4 1/2") 3185805 (5 1/4") 3316363 $ 105.00 K 1047 Thrust washer 445843P $ 10.00 1 Hose Cap 2 1/2" NST- 3200212 or Provide Specs $ 97.00 1 Steamer Nozzle Cap 4 1/2" NST - 2200232 or Provide specs $ 245.00 Upper Standpipe section (Ground line up): Provide specs $ - With 2 hose nozzles inserted w/caps, chain, & gaskets Provide specs $ 1,951.00 With 2 hose & 1 Steamer inserted w/caps, chain, & gaskets Provide specs $ 2,364.00 Elbow drain tubing only (each) 440557P $ 7.00 S hook 442159P $ 10.00

Page 29 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" FIG. K10B SAFE TOP FIRE HYDRANT WITH BREAKING NUT PARTS (DISCONTINUED HYDRANT) ◄ Back One Page Back to table of contents. Parts Continued ►

Item # Description Part # Price K 1021B Upper Stem Section (wet top) 3313613(O/R) 3313612 (O/L) $ 227.00 K 1038 Stem Coupling 3185522 $ 116.00 K 1039 Stem coupling pin, each (2 req) 442886P $ 18.00 K 1042 Standpipe "O" Ring seal 441664P $ 13.00 K 1040 Breaking nuts, each (8 per) 442404P $ 20.00 K 1044 Standpipe bolts (8 per) 444413P $ 7.00 K 1020 Compression washer (8 per) 445835P $ 7.00 K 1046 Breaking nut "O" ring (8 Per) 442731P $ 6.00 K 1041 Lower Stem section with wrench guide & set screw Need Depth of Trench $ - For 5' trench or less Need Depth of Trench $ 246.00 ADD for each 6" increase Need Depth of Trench $ 23.00 Elbow with drain tubing only: $ - 4" & 6" bell or 6" tyton Part # available upon request N/A 4" MJ or flanged (4 1/2" only) Part # available upon request 1,251.00$ 6" MJ or flanged Part # available upon request 1,251.00$ $ - BRONZE TO BRONZE SEATING $ - Elbow with drain tubing & bronze insert: $ - 4" & 6" bell or 6" tyton N/A 4" MJ or flanged (4 1/2" only) 1,251.00$ 6" MJ or flanged 1,251.00$ Elbow bolt with nut 3" long (each) $ 19.00 $ - DRY TOP MODEL $ - K 1008A Cover Plate with "O" Ring (CP) 3198703/(O Ring) 442644P $ 228.00 K 1021A Upper Stem with brass ferrule 2310192(O/L) 231093(O/R) $ 249.00 K 1002A Operating stem nut with "O" rings & Alemite fitting 3198682-1 1/2"P or Provide Specs $ 356.00 "O" rings only (set of 3) 442650P(2Req)/442644P(1Req) $ 34.00

Page 30 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" FIG K11 SAFE TOP FIRE HYDRANT WITH BREAKING RINGS PARTS (DISCONTINUED HYDRANT) ◄ Back One Page Back to table of contents. Parts Continued ►

Item # Description Part # Price K 1101 Cap bolt with nut each (2 Per) (B) 444364P/(N) 442484P $ 15.00 K 1102 Operating stem nut with "O " Rings & Alemite fitting 3186082/1 1/2"P or need specs $ 345.00 K 1103 Alemite Fitting 441670P $ 7.00 K 1104 "O" Ring weather pressure seal (set of 2) 442650P $ 21.00 K 1105 Cap (need direction to open & color) 3185952 (Specify Wet Top or Dry Top) $ 345.00 K 1106 Lock nut set screw only 444438P $ 5.00 K 1107 Lock nut w/ set screw and thrust washer (LN)3185943(TW)445843P(SS)444438P $ 81.00 K 1108 Cover Plate (Wet Top) 3185922 $ 206.00 K 1109 Cover Plate bolts and nuts (each) (4 per) (B)-444358P/(N)-442484P $ 15.00 K 1111 Cover Plate Gasket 441803P $ 22.00 K 1112 Nozzle screw 444284P $ 9.00 K 1114 Steamer Nozzle Cap 4 1/2"NST-3200232 or Provide specs $ 278.00 K 1114 Hose nozzle cap gasket (2 1/2") 441790P $ 10.00 K 1114 Steamer nozzle cap gasket (4") 441794P (4 1/2")441796P $ 19.00 K 1115 Hose nozzle (2 1/2" NST - 3186442) or Provide specs $ 137.00 K 1115 Steamer nozzle (4 1/2" NST - 3196752) or Provide specs $ 278.00 K 1116 Nozzle Cap Chain - For 2 Hose Nozzles 440712P $ 32.00 K 1117 Nozzle Cap Chain - 2 Hose & 1 Steamer 440711P $ 36.00 K 1118 Upper Stem Section, wet top 3194132 (O/L) 3194133 (O/R) $ 227.00 K 1119 Upper Standpipe section only (specify MVO) (3W) 3187472 (2W) 3187422 ######## K 1120 Stem Breaking coupling 3185522 $ 116.00 K 1121 Stem coupling pins, each 442886P $ 18.00 K 1122 Standpipe Breaking Ring 3185542 $ 253.00 K 1123 Standpipe gasket (breaking ring) 441812P $ 27.00 K 1125 Lower Standpipe Section: Provide Depth of Trench For 5' Trench of less Provide Depth of Trench ######## ADD for each 6" increase Provide Depth of Trench $ 146.00 K 1126 Seat removing wrench guide only 3185572 $ 20.00 K 1127 Wrench Guide Set Screw Only 444159P $ 5.00 K 1128 Elbow Bolt & Nut (each) (8 Per) (B) 444358P/(N) 442484P $ 16.00 K 1129 Drain Valve facing & rivets pair (5 1/4")442230P/(4 1/2")442232P(R)444528P $ 32.00 K 1130 Drain Valve w/facing & rivets only (5 1/4") 2185972/(4 1/2") 2185782 $ 268.00 K 1131 Elbow Gasket 441805P $ 22.00 K 1132 Seat Ring (5 1/4") 3185982/(4 1/2") 3185792 $ 352.00 K 1133 Seat Ring Gasket (5 1/4") 441820P/(4 1/2") 441832P $ 30.00 K 1134 Drain Valve Key only 442218P $ 7.00 K 1136 Main Valve (Neoprene) (5 1/4") 445904P/(4 1/2") 445776P $ 179.00 K 1135 Top Plate (5 1/4"only) 3185992 $ 83.00 K 1137 Bottom Plate (5 1/4") 3316363 (4 1/2") 3185805 $ 105.00 K 1138 Elbow with Drain tubing only: 4" & 6" bell or tyton N/A 4" MJ or Flanged (4 1/2" only) Part # available on request ######## 6" MJ, flanged Part # available on request ######## K 1139 Elbow Drain Tubing only - each 440557P $ 7.00 K 1141 Thrust washer 445843P $ 10.00 S Hook 442159P $ 8.00 Steamer nozzle cap 4 1/2" NST 3200232 $ 245.00 Hose nozzle cap 2 1/2" NST 3200212 $ 97.00

Page 31 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

4 1/2" & 5 1/4" FIG K11 SAFE TOP FIRE HYDRANT WITH BREAKING NUTS PARTS (DISCONTINUED HYDRANT) ◄ Back One Page Back to table of contents. Parts Continued ►

Item # Description Price K 1119 Upper Standpipe Section (Ground line up): With 2 Hose nozzles inserted w/caps, chains & gaskets ► Note: Please provide specs for part needed. 1,951.00$

With 2 Hose & 1 Steamer inserted w/caps, chains & gaskets ► Note: Please provide specs for part needed. 2,364.00$

K 1124 & Lower Stem section with wrench guide & set screw K 1126 & For 5' trench or less $ 246.00 K 1127 ADD for each 6" increase $ 23.00 ► Note: Please provide depth of trench when ordering lower stems.

BRONZE TO BRONZE SEATING Elbow with drain tubing & bronze insert: 4" & 6" bell or 6" tyton N/A 4" MJ or flanged (4 1/2" only) 1,251.00$ 6" MJ or flanged 1,251.00$ Elbow bolt with nut 3" long (each) $ 19.00

DRY TOP MODEL K 1112 Cover Plate with "O" Ring (CP) 3198703 (O-Ring) 442644P $ 228.00

K 1119A Upper Stem with brass ferrule 2310182 (O/L) 2310183 (O/R) $ 248.00

K1105/10/3 Operating nut with "O" rings & Alemite fitting 3198682/1-1/2"P $ 356.00 ► Note: Please provide specs for all other op-nuts.

K1105/10/12 "O" rings only (set of 3) 442650P (2 req) 442644P (1 req) $ 34.00

Page 32 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

◄ Back One Page Back to table of contents.

WRENCHES, COLLISION REPAIR KITS, LUBRICANT FOR HYDRANTS Fig. 114 seat removing wrench for fixed depth of 6' max. for K10/K11/K12 ######## Extension wing nut to make Fig. 114 adjustable 24" max. (e.g. 6' to 4') $ 275.00 Lubricant - Nevastane (12 oz. Cartridge) PC#441636T $ 30.00 Collision Repair kit for K10B 1580C00R1X10B $ 332.00 Collision Repair kit for K11 1580C00R1X11Z $ 332.00 Hose Nozzle removing wrench (specify model of hydrant) 3310372 - 2 /12" $ 149.00 Steamer Nozzle removing wrench (specify model of hydrant) 3310392 - 4" $ 182.00 3310382 - 4 1/2" $ 182.00

EXTENSION KITS FOR K10, K10B, K11 FIRE HYDRANTS Includes: Ext. spool, Stem section, coupling, pin, nuts, & gaskets

Size K10B K11 K10 Wet Top (O/L*) K10 Dry Top (O/L*) Price 6" 1580006R2X10B 1580006R2X11W 1580006R2L10W* 1580006R2L20D* $ 730.00 12" 1580012R2X10B 1580012R2X11W 1580012R2L10W* 1580012R2L20D* $ 889.00 18" 1580018R2X10B 1580018R2X11W 1580018R2L10W* 1580018R2L20D* $ 952.00 24" 1580024R2X10B 1580024R2X11W 1580024R2L10W* 1580024R2L20D* ######## 30" 1580030R2X10B 1580030R2X11W 1580030R2L10W* 1580030R2L20D* ######## 36" 1580036R2X10B 1580036R2X11W 1580036R2L10W* 1580036R2L20D* ######## 42" 1580042R2X10B 1580042R2X11W 1580042R2L10W* 1580042R2L20D* ######## 48" 1580048R2X10B 1580048R2X11W 1580048R2L10W* 1580048R2L20D* ######## ► NOTE: *For Open Right, Change "L" to "R"

**NOTE: 1280, 1180, 1080 & RD. WOOD HYDRANT PART NUMBERS, PRICING & AVAILABILITY ARE ** **AVAILABLE UPON REQUEST**

Page 33 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C-509 KS-FW NRS RESILIENT SEATED GATE VALVE PARTS Back to table of contents. Item # Description 2" Part # 2 1/2" Part# 3" Part # R-1 Hold down Hex Bolt $ 6.00 460237P $ 6.00 460237P $ 6.00 460237P R-2 Hold down Bolt Washer $ 2.00 445794P $ 2.00 445794P $ 2.00 445794P R-3 Operating Nut O/L $ 28.00 328080& $ 28.00 328080& $ 28.00 328081& Operating Nut O/R $ 28.00 328085& $ 28.00 328085& $ 28.00 328086& Hand wheel O/L $ 82.00 328762P $ 82.00 328762P $ 82.00 328763P Hand wheel O/R $ 82.00 3287625 $ 82.00 3287625 $ 82.00 3287625 R-4 Stuffing Box Bolts $ 3.00 460231P $ 3.00 460231P $ 3.00 460269P Stuffing Box Nuts $ 3.00 460218P $ 3.00 460218P $ 3.00 460218P R-5 Stuffing Box $ 29.00 3281802 $ 29.00 3281802 $ 50.00 3281822 R-6 Stem O Ring $ 3.00 442638P $ 3.00 442638P $ 3.00 442676P R-7 Stuffing Box O Ring $ 6.00 442652P $ 6.00 442652P $ 7.00 442732P R-8 Thrust Washer $ 2.00 445932P $ 2.00 445932P $ 2.00 445933P R-9 Stem O/L $ 129.00 3280302 $ 129.00 3280302 $ 267.00 3280312 Stem O/R $ 129.00 3280303 $ 129.00 3280303 $ 267.00 3280313 R-10 Cover Hex Bolts $ 3.00 460269P $ 3.00 460269P $ - 460269P Cover Nuts $ 3.00 460218P $ 3.00 460218P $ - 460218P R-11 Cover $ 239.00 3318044 $ 239.00 3318054 $ 324.00 3317064 R-12 Stem Nut O/L $ 65.00 3280602 $ 65.00 3280602 $ 69.00 3280612 Stem Nut O/R $ 65.00 3280603 $ 65.00 3280603 $ 69.00 3280613 R-13 Wedge $ 210.00 228098& $ 253.00 440941P $ 277.00 440943P R-14 Cover O Ring $ 8.00 442737P $ 11.00 442790P $ 16.00 442760P R-15 Body -**Part #'s avail. on request $ 587.00 ** $ 668.00 ** $ 706.00 ** R-16 Stuffing Box Plate (UL/FM) N/A N/A N/A N/A $ 224.00 3281872 R-17 Plug N/A N/A $ 8.00 443475P $ 8.00 443475P

Item # Description 4" Part # 6" Part # 8" Part # R-1 Hold down Hex Bolt $ 6.00 460237P $ 6.00 444385P $ 6.00 444385P R-2 Hold down Bolt Washer $ 2.00 445794P $ 2.00 445832P $ 2.00 445832P R-3 Operating Nut O/L $ 28.00 328081& $ 28.00 328082& $ 28.00 328083& Operating Nut O/R $ 28.00 328086& $ 28.00 328087& $ 28.00 328088& Hand wheel O/L $ 82.00 328763P $ 149.00 328766P $ 149.00 328768P Hand wheel O/R $ 82.00 3287635 $ 149.00 3287665 $ 149.00 3287685 R-4 Stuffing Box Bolts $ 3.00 460301P $ 3.00 460241P $ 3.00 460242P Stuffing Box Nuts $ 3.00 460212P $ 3.00 460212P $ 3.00 460212P R-5 Stuffing Box $ 55.00 3281832 $ 56.00 3281842 $ 70.00 3281852 R-6 Stem O Ring $ 3.00 442676P $ 7.00 477531P $ 7.00 442642P R-7 Stuffing Box O Ring $ 7.00 442732P $ 7.00 442649P $ 7.00 442649P R-8 Thrust Washer $ 2.00 445933P $ 3.00 445936P $ 3.00 445938P R-9 Stem O/L $ 282.00 3280322 $ 382.00 3280332 $ 515.00 3280342 Stem O/R $ 282.00 3280323 $ 382.00 3280333 $ 515.00 3280343 R-10 Cover Hex Bolts $ 3.00 460269P $ 3.00 460242P $ 3.00 460243P Cover Nuts $ 3.00 460218P $ 3.00 460212P $ 3.00 460212P R-11 Cover $ 363.00 3318084 $ 401.00 3318124 $ 453.00 3318164 R-12 Stem Nut O/L $ 69.00 3280612 $ 124.00 3280622 $ 143.00 3280632 Stem Nut O/R $ 69.00 3280613 $ 124.00 3280623 $ 143.00 3280633 R-13 Wedge $ 339.00 2280932 $ 429.00 2280942 $ 646.00 2280952 R-14 Cover O Ring $ 18.00 442610P $ 19.00 442761P $ 22.00 442762P R-15 Body-**Part #'s avail. on request $ 811.00 ** $ 1,193.00 ** $1,565.00 ** R-16 Stuffing Box Plate (UL/FM) $ 224.00 3281872 $ 224.00 3281882 $ 224.00 3281883 R-17 Plug $ 8.00 443475P $ 8.00 443488P $ 8.00 443488P

Page 34 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C-509 KS-FW NRS RESILIENT SEATED GATE VALVE PARTS Back to table of contents. Item # Description 10" Part # 12" Part # R-1 Hold down Hex Bolt $ 7.00 460228P $ 7.00 460228P R-2 Hold down Bolt Washer $ 3.00 445832P $ 3.00 445832P R-3 Operating Nut O/L $ 29.00 328084& $ 29.00 328084& Operating Nut O/R $ 29.00 328089& $ 29.00 328089& Hand wheel O/L $ 299.00 328770P $ 299.00 328770P Hand wheel O/R $ 299.00 3287705 $ 299.00 3287705 R-4 Stuffing Box Bolts $ 7.00 460233P $ 7.00 460233P Stuffing Box Nuts $ 5.00 460234P $ 5.00 460234P R-5 Stuffing Box $ 90.00 3281862 $ 90.00 3281862 R-6 Stem O Ring $ 7.00 442644P $ 7.00 442644P R-7 Stuffing Box O Ring $ 7.00 442739P $ 7.00 442739P R-8 Thrust Washer $ 4.00 445940P $ 4.00 445940P R-9 Stem O/L $ 734.00 3280352 $ 921.00 3280362 Stem O/R $ 734.00 3280353 $ 921.00 3280363 R-10 Cover Hex Bolts $ 4.00 460244P $ 4.00 460389P Cover Nuts $ 3.00 460212P $ 3.00 460212P R-11 Cover $ 797.00 3318204 $ 1,107.00 3318244 R-12 Stem Nut O/L $ 182.00 3280642 $ 182.00 3280642 Stem Nut O/R $ 182.00 3280643 $ 182.00 3280643 R-13 Wedge $ 983.00 2280962 $ 1,298.00 2280972 R-14 Cover O Ring $ 29.00 442764P $ 33.00 442766P R-15 Body-**Part #'s avail. on request $ 2,596.00 ** $ 3,416.00 ** R-16 Stuffing Box Plate (UL/FM) $ 224.00 3281892 $ 224.00 3281892 R-17 Plug $ 8.00 443488P $ 8.00 443488P

Page 35 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA C-515--DUCTILE IRON--NRS RS GATE VALVE PARTS Back to table of contents. Item # Description 2" - 3" 4" Part# 6" Part # R-1 Hold down Hex Bolt $ 6.00 460237P $ 6.00 444385P R-2 Hold down Bolt Washer Parts for 2" - 3" $ 2.00 445794P $ 2.00 445832P R-3 Operating Nut O/L ductile iron gate valves $ 28.00 328081& $ 28.00 328082& R-3 Operating Nut O/R are identical to the $ 28.00 328086& $ 28.00 328087& R-3 Hand wheel O/L C509 gate valve parts. $ 82.00 328763P $ 149.00 328766P R-3 Hand wheel O/R $ 82.00 3287635 $ 149.00 3287665 R-4 Stuffing Box Bolts Small valves use $ 3.00 460301P $ 3.00 460241P R-4 Stuffing Box Nuts full wall ductile iron $ 3.00 460212P $ 3.00 460212P R-5 Stuffing Box valve parts. $ 55.00 3301832 $ 56.00 3301842 R-6 Stem O Ring $ 3.00 442676P $ 7.00 477531P R-7 Stuffing Box O Ring Please see page 34 $ 7.00 442732P $ 7.00 442649P R-8 Thrust Washer for these parts. $ 2.00 445933P $ 3.00 445936P R-9 Stem O/L $ 282.00 3280322 $ 382.00 3280332 R-9 Stem O/R $ 282.00 3280323 $ 382.00 3280333 R-10 Cover Hex Bolts $ 3.00 460231P $ 3.00 460301P R-10 Cover Nuts $ 3.00 460218P $ 3.00 460212P R-11 Cover $ 363.00 3319084 $ 401.00 3319124 R-12 Stem Nut O/L $ 69.00 3280612 $ 124.00 3280622 R-12 Stem Nut O/R $ 69.00 3280613 $ 124.00 3280623 R-13 Wedge $ 339.00 2280932 $ 429.00 2280942 R-14 Cover O Ring $ 18.00 442610P $ 19.00 442761P R-15 Body-**Part #'s avail. on request $ 811.00 ** $ 1,193.00 ** R-16 Stuffing Box Plate (UL/FM) $ 224.00 3281872 $ 224.00 3281882 R-17 Plug $ 8.00 443475P $ 8.00 443488P OS&Y Cover $ 347.00 3327082 $ 400.00 3327122 OS&Y Hand wheel $ 142.00 328773P $ 166.00 328776P Item # Description 8" Part # 10" Part # 12" Part # R-1 Hold down Hex Bolt $ 6.00 444385P $ 7.00 460228P $ 7.00 460228P R-2 Hold down Bolt Washer $ 2.00 445832P $ 3.00 445832P $ 3.00 445832P R-3 Operating Nut O/L $ 28.00 328083& $ 29.00 328084& $ 29.00 328084& R-3 Operating Nut O/R $ 28.00 328088& $ 29.00 328089& $ 29.00 328089& R-3 Hand wheel O/L $ 149.00 328768P $ 299.00 328770P $ 299.00 328770P R-3 Hand wheel O/R $ 149.00 3287685 $ 299.00 3287725 $ 299.00 3287705 R-4 Stuffing Box Bolts $ 3.00 460241P $ 7.00 460233P $ 7.00 460233P R-4 Stuffing Box Nuts $ 3.00 460212P $ 5.00 460234P $ 5.00 460234P R-5 Stuffing Box $ 70.00 3301852 $ 90.00 3281862 $ 90.00 3281862 R-6 Stem O Ring $ 7.00 442642P $ 7.00 442644P $ 7.00 442644P R-7 Stuffing Box O Ring $ 7.00 442649P $ 7.00 442739P $ 7.00 442739P R-8 Thrust Washer $ 3.00 445938P $ 4.00 445940P $ 4.00 445940P R-9 Stem O/L $ 515.00 3280342 $ 734.00 3280352 $ 921.00 3280362 R-9 Stem O/R $ 515.00 3280343 $ 734.00 3280353 $ 921.00 3280363 R-10 Cover Hex Bolts $ 3.00 460241P $ 4.00 460242P $ 4.00 460242P R-10 Cover Nuts $ 3.00 460212P $ 3.00 460212P $ 3.00 460212P R-11 Cover $ 453.00 3319164 $ 797.00 3319204 $ 1,107.00 3319244 R-12 Stem Nut O/L $ 143.00 3280632 $ 182.00 3280642 $ 182.00 3280642 R-12 Stem Nut O/R $ 143.00 3280633 $ 182.00 3280643 $ 182.00 3280643 R-13 Wedge $ 646.00 2280952 $ 983.00 2280962 $ 1,298.00 2280972 R-14 Cover O Ring $ 22.00 442762P $ 29.00 442764P $ 33.00 442766P R-15 Body-**Part #'s avail. on request $ 1,565.00 ** $ 2,596.00 ** $ 3,416.00 ** R-16 Stuffing Box Plate (UL/FM) $ 224.00 3281883 $ 224.00 3281892 $ 224.00 3281892 R-17 Plug $ 8.00 443488P $ 8.00 443488P $ 8.00 443488P OS&Y Cover $ 499.00 3327162 $ 773.00 3327202 $ 926.00 3327242 OS&Y Hand wheel $ 204.00 328778P $ 318.00 328780P $ 318.00 328780P

Page 36 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA IRON SWING CHECK VALVE PARTS 1106/1106A, LS & LW Back to table of contents. Parts Continued ► Item # Description 2" Part # 2 1/2" Part # 3" Part # 1A Side Plug (2 in 1106's,1-LS/LW) $ 43.00 3160885 $ 43.00 3160885 $ 43.00 3160885 1AB Side Plug O-Rings $ 4.00 442731P $ 4.00 442731P $ 4.00 442731P 2A Cap Bolts (price each) $ 11.00 460228P $ 11.00 460228P $ 11.00 460231P 3A Cap O-Ring $ 15.00 442790P $ 15.00 442790P $ 18.00 442790P 4A Cap $ 112.00 3103330 $ 112.00 3103330 $ 120.00 3103330 5A & 15A Body with Seat Ring $ 450.00 3101042 $ 536.00 3101052 $ 694.00 3101062 6A Hinge Pin (Plain) $ 48.00 445100P $ 48.00 445101P $ 57.00 445102P 7AA Hinge (Plain) $ 86.00 3164202 $ 108.00 3163522 $ 126.00 3164222 *7AB Hinge w/keyway for LS/LW $ 108.00 3164203 $ 123.00 3163523 $ 143.00 3164223 10A Disc Holder $ 90.00 3120602 $ 100.00 3120432 $ 139.00 3118382 11A Disc Plate $ 44.00 3157222 $ 65.00 3157232 $ 69.00 3157092 12AA Disc (Rubber Faced) $ 35.00 440890P $ 35.00 440891P $ 45.00 440879P 12AB Disc (Bronze Faced) $ 85.00 3120422 $ 85.00 3121022 $ 141.00 3120442 13A Disc Nut $ 11.00 460365P $ 11.00 460209P $ 11.00 460209P 15A Seat Ring $ 45.00 3146891 $ 59.00 3146631 $ 72.00 3146641 16A Spring $ 20.00 444613P $ 20.00 444613P $ 20.00 444613P *17A Extended Hinge Pin for LS/LW $ 195.00 3226472 $ 195.00 3226482 $ 219.00 3168232 18A Key for LS/LW $ 7.00 3169592 $ 7.00 3169592 $ 7.00 3169592 19A Set Screw for Weight $ 11.00 444024P $ 11.00 444024P $ 11.00 444024P 20AA Lever Arm for L/S $ 72.00 315387A $ 72.00 315387A $ 72.00 315388A 20AB Lever Arm for L/W $ 72.00 315387A $ 72.00 315387A $ 72.00 315388A 21A Bracket $ 46.00 3366052 $ 46.00 3366052 $ 46.00 3366052 22A Hex Head Bracket Bolt $ 5.00 444389P $ 5.00 444389P $ 5.00 444389P 23A Eye Bolt (w/2 Hex Nuts) $ 49.00 440238P $ 49.00 440238P $ 49.00 440238P (Eye Bolt) w/2 Hex Nuts ** 442410P ** 442410P ** 442410P 24A Stuffing Box $ 118.00 3140732 $ 118.00 3140732 $ 118.00 3140732 25A Packing $ 22.00 452750L $ 22.00 452750L $ 22.00 452750L 26A Gland $ 53.00 3141572 $ 53.00 3141572 $ 53.00 3141572 27A Weight $ 89.00 3163053 $ 89.00 3163053 $ 138.00 3163053 28A Set Screw For Lever $ 11.00 443928P $ 11.00 443928P $ 11.00 443928P

** Price per pair or set (1 each of a bolt & nut) * Not interchangeable with parts manufactured prior to 1978 - must order hinge & pin. ►Note: Above part codes for current production only. Please specify year of manufacture when ordering. 2", 2 1/2" and 3" check valves require 2 disc nuts per valve for the rubber faced check valves only.

Page 37 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA IRON SWING CHECK VALVE PARTS 1106/1106A, LS, LW ◄ Back One Page Back to table of contents. Parts Continued ► Item # Description 4" Part # 6" Part # 8" Part # 1A Side Plug (2 in 1106's, 1 - LS/LW) $ 53.00 3160905 $ 72.00 3160955 $ 99.00 3160685 1AB Side Plug O-Rings $ 4.00 477531P $ 4.00 442642P $ 4.00 442727P 2A Cap Bolts (price each) $ 14.00 444430P $ 15.00 460236P $ 16.00 460247P 3A Cap O-Ring $ 18.00 442611P $ 23.00 442794P $ 27.00 442768P 4A Cap $ 193.00 3103340 $ 325.00 3103360 $ 409.00 3103380 5A & 15A Body with Seat Ring 1,052.00$ 3101082 1,730.00$ 3101122 2,702.00$ 3101162 6A Hinge Pin (Plain) $ 75.00 445103P $ 119.00 445105P $ 159.00 445106P 7AA Hinge (Plain) $ 163.00 3163555 $ 226.00 3163575 $ 280.00 3163585 *7AB Hinge w/keyway for LS/LW $ 183.00 3163558 $ 246.00 3163578 $ 336.00 3163588 8AA Disc Bolt (Rubber Faced) $ 56.00 3154633 $ 149.00 3154593 $ 176.00 3154603 8AB Disc Bolt (Bronze Faced) $ 47.00 440230P $ 56.00 440232P $ 65.00 440234P 9AA Disc Bolt O-ring (Rubber) $ 7.00 442634P $ 7.00 442636P $ 7.00 442636P 9AB Disc Bolt Gasket (Bronze) $ 7.00 441865P $ 7.00 441867P $ 7.00 441867P 10A Disc Holder $ 143.00 3115964 $ 315.00 3115984 $ 472.00 3116074 11A Disc Plate $ 88.00 3157022 $ 178.00 3157032 $ 288.00 3157042 12AA Disc (Rubber Faced) $ 95.00 440881P $ 148.00 440885P $ 192.00 440887P 12AB Disc (Bronze Faced) $ 235.00 2115793 $ 280.00 2115813 $ 330.00 2115823 13A Disc Nut (Bronze) $ 16.00 460210P $ 19.00 460211P $ 19.00 460211P 13AB Disc Nut (Rubber Faced) $ 11.00 460209P $ 16.00 460210P $ 16.00 460210P 15A Seat Ring $ 84.00 3145574 $ 106.00 3145584 $ 185.00 3145594 15AA Seat Ring O-Ring $ - 442714P $ - 442658P $ - 442716P 16A Spring $ 34.00 444619P $ 53.00 444621P $ 53.00 444620P *17A Extended Hinge Pin for LS/LW $ 375.00 3167942 $ 531.00 3167892 $ 643.00 3167902 18A Key for LS/LW (2 per) $ 9.00 3169602 $ 9.00 3169602 $ 9.00 3169602 19A Set Screw for Weight $ 11.00 444024P $ 11.00 444024P $ 11.00 444024P 20AA Lever Arm for L/S $ 101.00 315389A $ 118.00 315391A $ 134.00 315392A 20AB Lever Arm for L/W $ 101.00 315389B $ 118.00 315391B $ 134.00 315392B 21A Bracket $ 63.00 3366062 $ 78.00 3366072 $ 92.00 3366082 22A Hex Head Bracket Bolt (2 per) $ 5.00 444402P $ 5.00 444410P $ 5.00 444410P 23A Eye Bolt (w/2 Hex Nuts) $ 49.00 440236P $ 49.00 440236P $ 49.00 440236P (Eye Bolt) w/2 Hex Nuts ** 442412P ** 442412P ** 442412P 24A Stuffing Box $ 149.00 3140742 $ 166.00 3140752 $ 183.00 3140762 25A Packing $ 29.00 452768L $ 34.00 452764L $ 39.00 452750L 26A Gland $ 53.00 3141592 $ 67.00 3141612 $ 74.00 3141622 27A Weight $ 154.00 3163053 $ 154.00 3163053 $ 162.00 3163083 28A Set Screw For Lever $ 11.00 443986P $ 11.00 443986P $ 11.00 443986P

** Price per pair or set (1 each of a bolt & nut) * Not interchangeable with parts manufactured prior to 1978 - must order hinge & pin. Above part codes for current production only. Please specify year of manufacture when ordering.

Page 38 KENNEDY VALVE AWWA PRICE LIST WW 021012 EFFECTIVE DATE: February 10, 2012

AWWA SWING CHECK VALVE PARTS 1106/1106A, LS & LW ◄ Back One Page Back to table of contents. Item # Description 10" Part # 12" Part # 1A Side Plug (2 in 1106's, 1 - LS/LW) $ 136.00 3160765 $ 136.00 3160765 1AB Side Plug O-Rings $ 4.00 442659P $ 4.00 442659P 2A Cap Bolts (price each) $ 16.00 460247P $ 20.00 460247P 3A Cap O-Ring $ 40.00 442769P $ 48.00 442770P 4A Cap $ 630.00 3103400 $ 746.00 3103420 5A & 15A Body with Seat Ring $ 4,562.00 3101202 $ 6,251.00 3101242 6A Hinge Pin (Plain) $ 222.00 3167772 $ 320.00 445108P 7AA Hinge (Plain) $ 452.00 3163695 $ 586.00 3163705 *7AB Hinge w/keyway for LS/LW $ 574.00 3163698 $ 623.00 3163708 8AA Disc Bolt (Rubber Faced) $ 185.00 3152863 $ 225.00 3152873 8AB Disc Bolt (Bronze Faced) $ 108.00 3152862 $ 161.00 3152872 9AA Disc Bolt O-ring $ 7.00 442638P $ 7.00 442640P 10A Disc Holder $ 590.00 3116094 $ 782.00 3120554 11A Disc Plate $ 389.00 3157052 $ 432.00 3157062 12AA Disc (Rubber Faced) $ 228.00 440898P $ 263.00 440899P 12AB Disc (Bronze Faced) $ 525.00 2116093 $ 812.00 2120553 13A Disc Nut (bronze to bronze or Rubber Faced) $ 19.00 460211P $ 22.00 460234P 15A Seat Ring $ 253.00 3146694 $ 304.00 3146704 15AA Seat Ring O-Ring $ 40.00 442677P $ 48.00 442679P 16A Spring $ 174.00 444622P $ 174.00 444622P *17A Extended Hinge Pin for LS/LW $ 817.00 3226502 $ 1,125.00 3167882 18A Key for LS/LW (2 per) $ 12.00 3169622 $ 12.00 3169622 19A Set Screw for Weight $ 11.00 444024P $ 11.00 444024P 20AA Lever Arm for L/S $ 145.00 315393A $ 161.00 315394A 20AB Lever Arm for L/W $ 145.00 315393A $ 161.00 315393A 21A Bracket $ 92.00 3366092 $ 98.00 3366102 22A Hex Head Bracket Bolt (2 per) $ 5.00 444349P $ 5.00 444349P 23A Eye Bolt (w/2 Hex Nuts) $ 49.00 440236P $ 49.00 440236P Hex Nuts ** 442412P ** 442412P 24A Stuffing Box $ 225.00 3140772 $ 225.00 3140772 25A Packing $ 43.00 452768L $ 43.00 452768L 26A Gland $ 82.00 3141632 $ 82.00 3141632 27A Weight $ 228.00 3163093 $ 296.00 3163103 28A Set Screw For Lever $ 11.00 443986P $ 11.00 443986P

** Price per pair or set (1 each of a bolt & nut) * Not interchangeable with parts manufactured prior to 1978 - must order hinge & pin. Above part codes for current production only. Please specify year of manufacture when ordering.

Page 39