HARPOONS, AFTCO, SEEKER DARTS, GAFFS & SUPPLIES • TACKLE ALL PRICES LESS 10% [SEE POLICY PAGE FOR DETAILS]

COCKPIT Custom Harpoon, made in the USA. are sold complete with stainless shaft, and one rigged dart! Great for landing tuna, swordfish, shark, dorado, wahoo, and other large gamefish! 8 ft. long. Black fiberglass handle. No. Price 87221001 $161.06

FIBERGLASS GAFFS Tapered fiberglass handles with custom seine-cord grip wrap with Turk’s heads. Featuring 316 stainless hooks in 2" and 3" sizes, with 4', 6' and 8' handles. No. Handle Hook Price AFG24 4' 2" $55.67 AFG26 6' 2" 65.68 AFG28 8' 2" 84.54 AFG34 4' 3" 56.73 AFG36 6' 3" 66.76 AFG38 8' 3" 84.54

TWO-PIECE TOURNAMENT GAFF Also great for bridge, party boats and jettys. This 12 foot, two piece gaff features a black anodized shaft that is divided into an 8 foot section with hook, and a 4 foot rear section, complete with two vinyl grips. Constructed of marine grade aluminum and is joined in the middle with a ferrule and collet nut characteristic of the AFTCO Unibutt. The ferrule and collet nut “joint” is extremely strong, lightweight and fully waterproof when assembled. Both the ferrule and nut are permanently attached to the forward section, and because the end of the ferrule accepts a vinyl butt cap, this longer 8-foot shaft can optionally be used as a stand-alone gaff. No. Price 3612HB $132.48 Custom Rigging TAPER-TIP ALUMINUM GAFFS Available Slim tapered shape makes these gaffs easy and fast to maneuver. Shafts are made from corrosion resistant marine aluminum anodized a rich gold (unless indicated with “B” for all black.) Soft but rugged black grips and black vinyl butt caps. No. Hook Throat Lgth Price 243L 2" 3' $46.18 244L 2" 4' 46.14 256H 2" 6' 65.68 353H 3" 3' 51.97 354H 3" 4' 56.73 356H 3" 6' 66.76 Slim, tapered 464H 4" 4' 61.94 “Swaging” Rugged “Wedge-Lok” shaft is easier 464H-B* 4" 4' 64.10 provides uniform Fitting. Hook cannot to maneuver 466H 4" 6' 73.17 strength without pull out. in the water. 466H-B* 4" 6' 74.99 extra weight. 468H 4" 8' 87.66 586H 5" 6' 84.03 586H-B* 5" 6' 85.54 Barbed With Breakaway * indicates all black shaft, grips & butt cap. triangular hook. Hook for Gaffing FLYING GAFF HANDLE No Color Price Powerful Fish! 006FG Gold $117.91 Plastic insert 006FG-B Black 121.77 Taper-Tip seals out water to Flying prevent corrosion. FLYING GAFF HOOKS Line snaps to Gaffs release the hook Corrosion-resistant stainless steel hook. from the shaft. No. Size Price FGH5 5" $86.88 FGH6 6" 103.57 FGH8 8" 127.35 FGH10 10" 200.29 * Rigging available

www.merricktackle.com / [email protected] MERRICK TACKLE 315 TACKLE • GAFFS, TAILERS, KITES AFTCO, BRONCO, TARRED LINE ALL PRICES LESS 10% [SEE POLICY PAGE FOR DETAILS]

FISH TAILER Provides safer, cleaner control of boated fish. Facilitates For safer, cleaner, control of boated injury free tagging. Brings fish under control quickly for fish and injury free tagging. 18" measuring. 4' long gold anodized taper tip aluminum 3 shaft with ⁄4" springy stainless steel aircraft cable, and a smaller plastic-coated cable that actually closes around the fish’s tail. Lifts up to 100 lbs. Approximate 18" diameter loop. No. Price MST1 $80.62 TAG STICK 3 6' with a ⁄4" OD at the butt. Either head can be threaded into the 3 end of the shaft and can be easily replaced. Color: Gold Overall 6-foot length, with taper-tip shaft and ⁄4 inch OD at butt. No. Price Accommodates the two tag heads shown below. 006L $46.34

TAG STICK HEAD KITE ROD No. Description Price 42" Graphite composite blank kite rod with rear sleeve TSH1 Fits standard NMFS tags. $4.67 butt, aluminum gimbal and aluminum reel seat. Sic top. For “forked” applicators No. Price TSH2 Fits TBF & newer NMFS tags 4.67 STIKTROD $34.95 For “pointed” applicators

TWO-PIECE TAG & RELEASE STICKS The Aftco Tag and Release Stick features a special tag-tip head that allows either The Billfish Foundation or the National Marine Service tag tips to be used. Also featured is an integrated, replaceable stainless steel line- cutter blade, designed for easily cutting monofilament leaders after a fish has been tagged. The tagging poles (both 6 and 8-foot models) are specially designed two-piece E-glass blanks, ferruled in the middle and custom-crafted to handle the stresses associated with tagging big game fish and cutting heavy leaders. Handles are deep brown in color, complemented by black nylon trim wraps with metallic blue-and-gold accents. Black seine cord wrappings with Turk’s Heads (finished with epoxy for durability and tackiness) and a rubber butt cap completes each tag stick handle. No. Size Price AFTS6BRWN 6-foot $147.40 AFTS8BRWN 8-foot 176.87

TARRED POLYESTER LINE Many uses such as codfish trot lines, rigging, etc. MERRICK TACKLE No. Description Price MTTMF16 1 lb. tube $15.00 3 200 lb. test, ⁄32", 160 yds RIGGED HARPOON 20' FLYING GAFF & MTTMH16 1 lb. tube 15.00 DARTS HARPOON ROPE & SNAP 1 No. Price 300 lb. test, ⁄8", 100 yds No. Material Price CPFGR20 $29.95 CPDR2 Bronze $32.99 STAINLESS CABLE HARPOON DARTS 20' FLYING GAFF & Stainless steel cable with thimble and crimped sleeves. HARPOON ROPE & CABLE Can be fitted to either the bronze harpoon dart or No Material Price flying gaff head. Other lengths available upon request. CPHD2 Bronze $19.88 No. Price No. Description Price CPFGR201 $33.95 CA3 Cable, 3' overall $13.00 CA4 Cable, 4' overall 15.00

COMMERCIAL GAFF This heavy-duty gaff is what commercial fishermen use. The proven hook design makes gaffing safer, easier and more accurate. Also used as a clubbing device it is constructed of solid hardwood and has an easy to grip handle. The strong, stainless ALUMINUM GAFFS steel hook is locked in place with a stainless steel sleeve. Exclusive Ethyl Vinyl Acetate, Non-slippery Grips, No. Price Black Nylon Caps on Both Ends, Aluminum Anodized DACG24 $16.50 Bright Finish Shafts, Stainless Steel Hook. No. Description Price HERGAF83 8" handle, 3" hook $15.73 HERGAF243 24" handle, 3" hook 18.92 HERGAF363 36" handle, 3" hook 21.76 HERGAF483 48" handle, 3" hook 25.45 HERGAF484 48" handle, 4" hook 33.07 HERGAF604 60" handle, 4" hook 36.00 HERGAF724 72" handle, 4" hook 38.94

316 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763 AFTCO, PLANERS, OUTRIGGER CLIPS, ACCESSORIES • TACKLE ALL PRICES LESS 10% [SEE POLICY PAGE FOR DETAILS]

GLASS OUTRIGGER RINGS / 2PK No. Price SSO610 $1.50

ROLLER-TROLLER OUTRIGGER & FLAT LINE CLIPS Both models put trolled lines on a big, polished roller that turns right WITH the line. You stop “sawing” a few critical inches of line over a thin wire bail as your lures skip and jerk through the water. Easy adjustments for tension & lure distance. No. Description Price All Sea Striker products are available. FL1 Aftco Flat Line Clip $18.68 OR1 Aftco Outrigger Clip (per pair) 37.35

FL1 OR1

RELEASE CLIPS DUB1051 DUB1055 MULTI-PURPOSE RELEASE CLIPS No. Description Price The Ultimate bait clip. Super lightweight, composite clip is perfect for kites, , and outriggers. DUB1051 cable release clip $6.48 DUB1052 Downrigger release clip 7.29 No. Description Price DUB1052 OC1 Goldfinger Clip $8.98 DUB1055 Drop-Back release (2/cd) 3.68 DC1 Downrigger Clip 7.19 KC1 Kite Release Clip 8.98 FLAG CLIPS No. Description Price DUB1500 Flag clips (2/bag) $3.54 DUB1501 Antenna flag clips (2/bag) 3.72 OC1 DC1 KC1 DUB1502 E/Z on flag clips (2/bag) 4.70 DOWNRIGGER RELEASE ASSEMBLY Ideal when live baits or lures for everything from King Mackerel PLANERS to billfish. The DCW1 is designed to be snapped directly on to your Completely Rigged existing downrigger cable’s snap swivel. The downrigger ball or planer No. Size Price can then be snapped on to the terminal end of the DCW1. When the baits or lures are being deployed, the ball or planer stays in the water RA91091 #2, 250 lb. mono 30 ft. $15.94 while the clip sits above the surface where it can be easily loaded. This RA91092 #3, 250 lb. mono 60 ft. 19.13 keeps the ball or planer from swinging around and damaging the boats RA91093 #4, 250 lb. mono 60 ft. 22.31 hull. Poor Man’s Downrigger No. Price DCW1 $15.28 KITE CLIP KIT Includes everything needed (except the Dacron or LOW VISIBILITY MONOFILAMENT DOWNRIGGER monofilament line) to set up a kite fly-line for RELEASE & ASSEMBLY one or two baits.Total of 11 pieces: (2) Goldfinger Use of mono line improves the strike ratio when downrigging for all Release Clips, (3) Black Barrel Swivels, (5) Kite gamefish, first by limiting the vibration otherwise created by wire cables, Hooks, (1) Heavy Duty Snap. and second by decreasing gear visibility. The DCW-2 is designed to be No. Price crimped directly to your existing downrigger cable with special mini KCK1 $21.22 double crimp provided in the package. No. Price DCW2 $17.45

AFTCO DECK KEY The “On Board” Tool that no boater will want to be without! The new Aftco Deck Key will quickly become your “best friend” on We stock all of the components to make a kite rod board the boat. This tough, glass-filled 2.25" by 4.25" black nylon tool is designed to open your fuel and water deck fills (two sizes), remove garboard and drain plugs, unscrew FISHING KITE any large slotted fitting—such as a Designed for deploying live baits for Sailfish, Tuna, freshwater fill or waste water drain— Marlin and other gamefish. Completely waterproof, and it even has a convenient V-slot constructed of ripstop nylon material, won’t mildew for shaking live baits free from and flies wet. One kite for various wind conditions. “” bait rigs. The molded hole in one end makes for easy attachment to a key chain, key-chain “float” or No. Description Price lanyard so you can easily find your KITE Kite kit comes with one set med. spars $62.92 Deck key when you really need it! KITE2 Kite kit complete with one set of each: 76.14 No. Price light & medium spars ADKB Not available at time of printing.

www.merricktackle.com / [email protected] MERRICK TACKLE 317 TACKLE • AERATOR, ROD HOLDER, CABLE HOLDER E-Z OUT-RODDER ALL PRICES LESS 10% [SEE POLICY PAGE FOR DETAILS]

ROCKET LAUNCHER ROD HOLDER ROCKET LAUNCHER ROD HOLDER • Keeps rods and reels clear • Fully adjustable rocket launcher that allows for both vertical and of deck traffic. horizontal adjustment of rod holders. • Easy installation and • Includes universal equipment bracket for mounting lights, antennas, and maintenance. other marine equipment. • All stainless steel durable • Corrosion resistant anodized aluminum. construction. • Patent pending. • Resists rust and corrosion. No. Price • Vinyl sleeve protects rods WINRT1 $195.00 from scuffs and scratches. No. Price WINRR4 $122.00

ROD RIGGER/STAINLESS STEEL OUTRODDER • Separates lines when trolling by extending rod tips out laterally from boat. • Mounts in most rod holders on today’s boats. BOARDING HANDLE • Vinyl sleeve protects rods from scuffs and scratches. • This unique all stainless steel device fits in flush-mount No. Price Each holders to provide a secure, yet removable WINRR1 $47.00 handhold for use when coming aboard a vessel. • Constructed of 1-1/4" and 1" thick wall tubing, it has a push button to disassemble for compact stowage. • Fits into 30 degree flush mount rod holder. • Electropolished to prevent corrosion. • Also handy for holding shore-power cords or hoses off the deck while in the slip. No. Price WINBH1 $95.00

CABLE HOLDER • Cable Holder is designed to keep heavy shore power cords or water hoses away from the water and off the gunwale. • The thick walled stainless steel cable guide fits into most rod pole holders with a slotted stud located at the bottom. AERATORS • Fits into 230 degree flush mount rod holder. 1 10 ⁄4" Long: great for 48 quart coolers, 5 gallon • The holder’s 2-1/2" eye keeps cords high enough to clear toe buckets or shallow Live Wells. Used by top rails and railings and stands straight up as the pole is bent tournament professionals on the walleye trail. slightly. 1 13 ⁄4" long: the most popular size turns 5 gallon • Electropolished to prevent corrosion, the Cable Holder is 28" buckets into great bait tanks, strong enough to high overall. 1 handle up to 30 gallon Live Wells. High output, 19 ⁄4" long, the strongest Aerator on the market! Works great for big Live Wells and shad tanks. No. Price Has a rating from 20 gallons and up. All draw less than 1 amp DC, which WINCH1 $42.00 is equivalent to a bow light on a small boat. No. Description Price 1 10010 10 ⁄4" long $38.86 2 1 NEW STYLE BAIT AERATOR - THE “O ” BAIT SPA 10014 14 ⁄4" long 40.20 1 Finally! A good quality, functional, reasonably priced and attractively 10019 19 ⁄4" long 41.54 packaged Bait Aerator! Features include: • Molded high-impact plastic body - resists corrosion! • Motor compartment sealed with a watertight rubber gasket • Flexible metal clip conforms to a wide variety of buckets! • Soft 20" rubber hose with 1-1/2" airstone • Runs on 1 or 2 “D” cell batteries • 90 day limited factory warranty • Heavy duty push-button, on-off switch. No. Price Ea. FJNAP2000 $8.75

318 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763