MESA TACTICAL Urbino Pocket Sling Attachments 8 in 2019, Mesa Tactical Will Celebrate Its 16Th Year in Business

CATALOG NEW 24 TRUCKEE™ FOREND FOR BENELLI M4 SEMI-AUTOMATIC SHOTGUN

WWW.MESATACTICAL.COM PRICES VALID FOR 90 DAYS AFTER JANUARY 1, 2019 TRUCKEE™ FOREND FOR BENELLI M4 SEMI-AUTOMATIC SHOTGUN 4

URBINO ® TACTICAL STOCK SYSTEM 6 MESA TACTICAL Urbino Pocket Sling Attachments 8 In 2019, Mesa Tactical will celebrate its 16th year in business. In a decade and a half, Urbino Rear Hook Loops 9 our little company changed how American law enforcement agencies equip themselves, Urbino Tactical Stock Accessories 9 producing over 150,000 of our revolutionary SureShell shotshell carriers for agencies large and small, as well as private citizens. We also develop and market some of the TELESCOPING STOCK AND ADAPTER KITS 10 highest quality tactical buttstock assemblies, including our LEO stock adapters and LEO® Telescoping Stock Kit 10 Urbino fixed tactical stocks. Pocket Sling Attachments 11 While we continue to focus on innovative ideas to enhance the tactical shotgun, including High-Tube® Telescoping Stock Kit 12 our exciting new Truckee™ forends for the Benelli M4 shotgun (see page 4), this year we Hydraulic Recoil Buffer 13 have dramatically expanded our attention to encompass the AR-15 rifle and other carbine Lucy® Adapter for 20GA Shotguns (Rem 870) 14 platforms, with new products and an aggressive new branding, Mesatac™. If you turn this Sling Ring™ Shotgun Sling Mounts 15 catalog over, you will see our new Mesatac catalog with its three flagship product lines, the Black Rock™ stocks and Pyramid™ handguards for the AR-15 rifle; and the Faro® stock SURESHELL® SHOTSHELL CARRIERS 16 adapter for the FN SCAR carbine. SureShell® Aluminum Shotshell Carriers (Side Mount) 16 This is a thrilling time for Mesa Tactical. We have always been strong advocates for the SureShell® Aluminum Shotshell Carriers with Rails 18 tactical shotgun, but at the same time the important tactical role of the carbine cannot Stock Mount SureShell® Shotshell Carriers 21 be denied, plus the Mesa Tactical staff are enthusiastic carbine shooters. In the years SureShell® Hook & Loop Shotshell Carriers 22 ahead we will continue to roll out rugged, stylish and innovative equipment to enhance the AR-15 and other rifle platforms, but we will never forget or forsake where we started: SureShell® Polymer Shotshell Carriers 23 the tactical shotgun. BARREL AND MAGAZINE CLAMPS 24

Mesa Tactical PICATINNY RAILS 25 1775 Kuenzli St Reno, NV 89502 Tel: 714-545-3332 • Fax: 714-545-3339 MESA TACTICAL SWAG 27 WWW.MESATACTICAL.COM

Made from 6061-T6 aluminum and high temperature glass-filled nylon polymer endcaps. Industry standard M-LOK slots can accept Picatinny rail sections as well as other M-LOK mounts and accessories. Replacement forend counts as one US-made part for compliance with Federal law 18 U.S.C. § 922(r), if necessary. Installs in seconds; stays on the barrel when the weapon is stripped for cleaning, but can be easily removed, at the bench or in the field, if access to the gas system is desired. No tools required for installation or removal. 8½ inch Truckee forend can be installed on any Benelli M4 shotgun. 11 inch Truckee forend requires the removal of the Benelli M4 shotgun’s factory front sling loop (requires the use of snap ring pliers).

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Benelli M4 semi-automatic shotgun, the new Truckee replacement forend provides industry standard M-LOK® mounting points on sides and bottom.

#95690 TRUCKEE FOREND FOR BEN M4 (12-GA, M-LOK, 11 IN)

TRUCKEE® FOREND FOR BEN M4 PART # ITEM PLATFORM LENGTH STYLE CALIBER EXPORT MSRP 95700 Truckee Forend for Ben M4 Ben M4 8 1/2 in M-LOK 12 GA NLR $100 95690 Truckee Forend for Ben M4 Ben M4 11 in M-LOK 12 GA NLR 120 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

4 | MESA TACTICAL #24 MESATACTICAL.COM | 5 URBINO® PISTOL GRIP STOCK SYSTEM

Specially-developed SureShell® shotshell carriers can be fitted to the cheek riser (see page 21). Rail-equipped Urbino stocks can be used without the cheek riser. Risers cannot be fitted to stocks that do not have the rails. All Urbino Tactical stocks are made in the USA, and include Benel- #90170 li-style rear sling loops for 1¼ inch sling webbing. SureShell Carrier for Urbino Cheek Riser In addition, a QD style sling swivel is included (6-Shell, 12-GA) (Left Side) that fits in a hole in the lower rear of the stock.

#94700 URBINO PISTOL GRIP SYSTEM Urbino Tactical Stock for LIMB- CHEEK Mossberg 930 (LimbSaver, 12-GA, Black) PART # ITEM PLATFORM SAVER RISER CALIBER WEIGHT EXPORT MSRP BERETTA • DEVELOPED SPECIALLY FOR LAW ENFORCEMENT AND 94960 Urbino Pistol Grip Stock Beretta 1301 12 GA 33 oz NLR $115.00 MILITARY OPERATORS 94970 Urbino Pistol Grip Stock Beretta 1301 Yes 12 GA 38 oz NLR 145.00 94980 Urbino Pistol Grip Stock Beretta 1301 Yes 12 GA 30 oz NLR 140.00 • REDUCED 12½” IN LENGTH-OF-PULL FOR QUICK HANDLING AND USE 94990 Urbino Pistol Grip Stock Beretta 1301 Yes Yes 12 GA 35 oz NLR 170.00 WITH BODY ARMOR OR OTHER LOAD BEARING GEAR REMINGTON 90070 Urbino Pistol Grip Stock Rem 870/1100/1187 12 GA 33 oz NLR 100.00 • OPTIONAL ADJUSTABLE CHEEK RISER FOR PROPER EYE ALIGNMENT 90080 Urbino Pistol Grip Stock Rem 870/1100/1187 Yes 12 GA 38 oz NLR 130.00 WITH SIGHTS OR OPTICS; NO TOOLS REQUIRED. 91540 Urbino Pistol Grip Stock Rem 870/1100/1187 Yes 12 GA 33 oz NLR 125.00 91550 Urbino Pistol Grip Stock Rem 870/1100/1187 Yes Yes 12 GA 38 oz NLR 155.00 • SANTOPRENE RUBBER PISTOL GRIP FOR CONTROL, COMFORT MOSSBERG AND FATIGUE REDUCTION 94680 Urbino Pistol Grip Stock Moss 930 12 GA 35 oz NLR 130.00 • OPTIONAL LIMBSAVER® BUTT PAD TO REDUCE FELT RECOIL 94690 Urbino Pistol Grip Stock Moss 930 Yes 12 GA 40 oz NLR 160.00 94700 Urbino Pistol Grip Stock Moss 930 Yes 12 GA 35 oz NLR 155.00 • MULTIPLE SLING ATTACHMENT OPTIONS, INCLUDING POCKET SLING 94710 Urbino Pistol Grip Stock Moss 930 Yes Yes 12 GA 41 oz NLR 185.00 MOUNTS BETWEEN THE RECEIVER AND THE STOCK 94470 Urbino Pistol Grip Stock Moss 930 Coyote 12 GA 40 oz NLR 160.00 94480 Urbino Pistol Grip Stock Moss 930 Yes Coyote 12 GA 41 oz NLR 185.00 BENELLI The Urbino is the first truly tactical stock for shotguns. A shorter LoP is necessary for use in tactical 90050 Urbino Pistol Grip Stock Ben M1/M2 12 GA 29 oz NLR 115.00 applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder, will not 90060 Urbino Pistol Grip Stock Ben M1/M2 Yes 12 GA 34 oz NLR 145.00 slip and increases comfort and control. 91500 Urbino Pistol Grip Stock Ben M1/M2 Yes 12 GA 30 oz NLR 140.00 91510 Urbino Pistol Grip Stock Ben M1/M2 Yes Yes 12 GA 35 oz NLR 170.00 90030 Urbino Pistol Grip Stock Ben M4 12 GA 30 oz NLR 115.00 90040 Urbino Pistol Grip Stock Ben M4 Yes 12 GA 35 oz NLR 145.00 91460 Urbino Pistol Grip Stock Ben M4 Yes 12 GA 30 oz NLR 140.00 91470 Urbino Pistol Grip Stock Ben M4 Yes Yes 12 GA 36 oz NLR 170.00 92410 Urbino Pistol Grip Stock SuperNova 12 GA 30 oz NLR 115.00 92420 Urbino Pistol Grip Stock SuperNova Yes 12 GA 35 oz NLR 145.00 92430 Urbino Pistol Grip Stock SuperNova Yes 12 GA 30 oz NLR 140.00 92440 Urbino Pistol Grip Stock SuperNova Yes Yes 12 GA 36 oz NLR 170.00

** Urbino Tactical stocks for the Benelli M2 can typically be fitted to Benelli M1 and Benelli M3 shotguns as well. NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

6 | MESA TACTICAL #24 MESATACTICAL.COM | 7 URBINO® TACTICAL POCKET REAR HOOK LOOP FOR SLING ATTACHMENTS URBINO TACTICAL STOCKS

The Urbino Tactical stock system features a molded pocket at the The Urbino Tactical stocks include stamped steel sling front where the stock meets the shotgun receiver. This pocket is plates that mimic the factory Benelli rear sling plates. designed to accept any of several stamped steel Sling Loops, Hook We have produced replacement stampings that feature a Loops or Push Button Sling Swivel mounts (a Hook Loop, Sling Loop circular hook loop instead of the sling loop for use with and sling plate blank are included with the Urbino Tactical Stock). increasingly popular H&K style (dog leash) sling hooks. The Push Button Sling Swivel mount includes a Push Button Sling These hook loops are stamped steel with a tough mil-spec Swivel, and all sling mounts feature a tough mil-spec manganese manganese phosphate finish. phosphate finish. Ambi style sling attachments feature mounts on both sides of the receiver (Ambi and Push Button mounts are not included with the stocks). REAR HOOK LOOP FOR URBINO TACTICAL STOCKS / 12 GAUGE PART # ITEM PLATFORM SLING STYLE WEIGHT EXPORT MSRP REMINGTON 91790 Rear Hook Loop Remington 870 H&K Hook 1 oz NLR $12.00 URBINO TACTICAL POCKET SLING ATTACHMENTS / 12 GAUGE 91800 Rear Hook Loop Remington 1100/11-87 H&K Hook 1 oz NLR 12.00 PART # ITEM PLATFORM AMBIDEXTROUS SLING STYLE WEIGHT EXPORT MSRP MOSSBERG REMINGTON 93960 Rear Hook Loop Moss 930 H&K Hook 1 oz NLR 12.00 91520 Pocket Push Button Sling Mount Rem 870/1100/11-87 - Push Button 2 oz NLR $25.00 BENELLI 91600 Pocket Ambi Sling Loop Rem 870/1100/11-87 Yes 1¼ in Sling 1 oz NLR 14.00 91810 Rear Hook Loop Ben M1/M2 H&K Hook 1 oz NLR 12.00 91610 Pocket Ambi Hook Loop Rem 870/1100/11-87 Yes H&K Hook 1 oz NLR 14.00 91820 Rear Hook Loop Ben M4 H&K Hook 1 oz NLR 12.00 91530 Pocket Ambi Push Button Sling Mount Rem 870/1100/11-87 Yes Push Button 2 oz NLR 25.00 93940 Rear Hook Loop Ben SuperNova H&K Hook 1 oz NLR 12.00 MOSSBERG BERETTA 94430 Pocket Push Button Sling Mount Moss 930 - Push Button 2 oz NLR 25.00 95450 Rear Hook Loop Beretta 1301 H&K Hook 1 oz NLR 12.00 94440 Pocket Ambi Sling Loop Moss 930 Yes 1¼ in Sling 1 oz NLR 14.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 94450 Pocket Ambi Hook Loop Moss 930 Yes H&K Hook 1 oz NLR 14.00 94460 Pocket Ambi Push Button Sling Mount Moss 930 Yes Push Button 2 oz NLR 25.00 URBINO TACTICAL BENELLI 91440 Pocket Push Button Sling Mount Ben M1/M2 - Push Button 2 oz NLR 25.00 STOCK ACCESSORIES 91890 Pocket Ambi Sling Loop Ben M1/M2 Yes 1¼ in Sling 1 oz NLR 14.00 Individual components of the Urbino Tactical stock system 91900 Pocket Ambi Hook Loop Ben M1/M2 Yes H&K Hook 1 oz NLR 14.00 can be purchased separately. The following items will fit 91450 Pocket Ambi Push Button Sling Mount Ben M1/M2 Yes Push Button 2 oz NLR 25.00 on any supported shotgun platform. Note that cheek risers 91480 Pocket Push Button Sling Mount Ben M4 - Push Button 2 oz NLR 25.00 can only be fitted to Urbino Tactical stocks that include 91770 Pocket Ambi Sling Loop Ben M4 Yes 1¼ in Sling 1 oz NLR 14.00 molded side support rails. 91780 Pocket Ambi Hook Loop Ben M4 Yes H&K Hook 1 oz NLR 14.00 91490 Pocket Ambi Push Button Sling Mount Ben M4 Yes Push Button 2 oz NLR 25.00 #92510 92490 Pocket Push Button Sling Mount Ben SuperNova - Push Button 2 oz NLR 25.00 Standard Buttpad for Urbino Stock (Black) 92470 Pocket Ambi Sling Loop Ben SuperNova Yes 1¼ in Sling 1 oz NLR 14.00 92480 Pocket Ambi Hook Loop Ben SuperNova Yes H&K Hook 1 oz NLR 14.00 URBINO TACTICAL STOCK ACCESSORIES 92500 Pocket Ambi Push Button Sling Mount Ben SuperNova Yes Push Button 2 oz NLR 25.00 PART # ITEM STOCK STYLE WEIGHT EXPORT MSRP BERETTA 91690 Cheek Riser for Urbino Stock Urbino w/Riser 10 oz NLR $30.00 95410 Pocket Push Button Sling Mount Beretta 1301 - Push Button 2 oz NLR 25.00 90520 Standard Buttpad for Urbino Stock Urbino 6 oz NLR 25.00 95420 Pocket Ambi Sling Loop Beretta 1301 Yes 1¼ in Sling 1 oz NLR 14.00 90530 LimbSaver® Buttpad for Urbino Stock Urbino 6 oz NLR 50.00 95430 Pocket Ambi Hook Loop Beretta 1301 Yes H&K Hook 1 oz NLR 14.00 92510 Standard Buttpad for Urbino Stock Urbino w/Riser 6 oz NLR 25.00 95440 Pocket Ambi Push Button Sling Mount Beretta 1301 Yes Push Button 2 oz NLR 25.00 92520 LimbSaver® Buttpad for Urbino Stock Urbino w/Riser 6 oz NLR 50.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. * Cheek Risers can only be fitted to Urbino Tactical stocks with molded riser support rails. NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

8 | MESA TACTICAL #24 MESATACTICAL.COM | 9 TELESCOPING STOCK AND ADAPTER KITS LEO® TELESCOPING STOCK KIT

ADAPTS AR-15 STYLE BUTT STOCKS AND PISTOL GRIPS FOR USE WITH REMINGTON 870, MOSSBERG 500/590 AND #92230 BERETTA 1301 SHOTGUNS LEO Telescoping Hydraulic Recoil Stock Kit for Rem 870 (12-GA) ADJUSTABLE LENGTH-OF-PULL TO FIT SHOOTER’S STATURE OR FOR USE WITH BODY ARMOR AND OTHER EQUIPMENT #91250 LEO Telescoping Stock adapter for OPTIONAL HYDRAULIC RECOIL BUFFER REDUCES FELT RECOIL LEO TELESCOPING STOCK KITS AND ADAPTERS / 12 GAUGE Rem 870 (12-GA) BY 70% PART# ITEM PLATFORM TYPE RAIL RECOIL WEIGHT EXPORT MSRP LEO TELESCOPING STOCK GIVES THE SHOTGUNS SIMILAR HANDLING 91250 LEO Gen I Telescoping Rem 870 Adapter Only None 11 oz NLR $80.00 CHARACTERISTICS TO THE AR-15 Stock Adapter - 91260 LEO Gen I Telescoping Rem 870 Stock Kit None - 31 oz NLR 190.00 PISTOL GRIP CONFIGURATION ALLOWS INCREASED CONTROL Stock Kit AND COMFORT 95640 LEO Gen I Hydraulic Rem 870 Adapter w/ None Hydraulic 21 oz NLR 255.00 Recoil Starter Pack Recoil Tube Only SLING ATTACHMENT POINTS INCLUDED 92230 LEO Gen I Telescoping Rem 870 Stock Kit None Hydraulic 40 oz NLR 315.00 Hydraulic Recoil STOCK KITS INCLUDE ALUMINUM STOCK ADAPTER; Stock Kit 6-POSITION RECEIVER EXTENSION TUBE OR 5-POSITION 93170 LEO Gen I Telescoping Moss 500/590/ Adapter Only None - 10 oz NLR 90.00 HYDRAULIC BUFFER; M4 CARBINE BUTTSTOCK; ERGO Stock Adapter Mav 88 93180 LEO Gen I Telescoping Moss 500/590/ Stock Kit None 31 oz NLR 200.00 GRIP; PUSH-BUTTON SLING SWIVEL; AND ALL MOUNTING Stock Kit Mav 88 - HARDWARE. SOME HIGH-TUBE KITS INCLUDE OPTICS RAIL. 95650 LEO Gen I Hydraulic Moss 500/590/ Adapter w/ None Hydraulic 20 oz NLR 265.00 Recoil Starter Pack Mav 88 Recoil Tube Only 93220 LEO Gen I Telescoping Moss 500/590/ Stock Kit None Hydraulic 40 oz NLR 325.00 Hydraulic Recoil Mav 88 ® Stock Kit LEO TELESCOPING STOCK KIT FOR SHOTGUNS 91050 LEO Gen II Telescoping Beretta 1301 Adapter Only None 10 oz NLR 105.00 Stock Adapter - The stock adapters are investment cast aircraft grade aluminum, machined and powder coated black 91060 LEO Gen II Telescoping Beretta 1301 Stock Kit None 31 oz NLR 215.00 Stock Kit - with a tough, chemical resistant finish. The LEO adapter is our best selling model, and features an 95660 LEO Gen II Hydraulic Beretta 1301 Adapter w/ None Hydraulic 20 oz NLR 280.00 optimal stock elevation allowing the use of iron sights or even the bead sight. All LEO adapters accept Recoil Starter Pack Recoil Tube optional push-button sling swivels, and Remington 870 and Beretta 1301 LEO adapters can accept Only 91070 LEO Gen II Telescoping Beretta 1301 Stock Kit None Hydraulic 40 oz NLR 340.00 stamped steel pocket sling loop and hook loops. Hydraulic Recoil Stock Kit NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

POCKET SLING ATTACHMENTS PART # ITEM PLATFORM CALIBER AMBIDEXTROUS SLING STYLE WEIGHT EXPORT MSRP 91390 Pocket Ambi Sling Loop for Rem Stock Adapters Rem 870 12-GA Yes 1¼ in Sling 1 oz NLR 12.00 #91070 91400 Pocket Ambi Hook Loop for Rem Stock Adapters Rem 870 12-GA Yes H&K Loop 1 oz NLR 12.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. LEO Telescoping Hydraulic Recoil Stock Kit for Beretta 1301 (12-GA)

10 | MESA TACTICAL #24 MESATACTICAL.COM | 11 TELESCOPING STOCK BUTT PADS AND 50% REDUCED RECOIL AND ADAPTER KITS RECOIL BUFFERS LimbSaver slip-on recoil pads feature a patented three-step recoil ® HIGH-TUBE TELESCOPING STOCK KIT reduction technology that reduces up to 50% of felt recoil, and maintains target acquisition. They feature a 12 month warranty by COMB HEIGHT EQUIVALENT TO AN AR-15 LimbSaver. Any Mesa Tactical telescoping stock kit can be upgraded HIGH-TUBE ADAPTER KITS with a Crosshair hydraulic recoil buffer which replaces the receiver INCLUDE A 9 1/2 IN PICATINNY TOP RAIL extension tube in our stock kits and reduces felt recoil by up to 70%. Purchase either a complete replacement M4 Carbine Stock recoil #91850 REQUIRES OPTICS OR AR STYLE SIGHTS Additional LimbSaver and standard rubber buttpads for the Urbino LimbSaver® Snap-on Recoil Pad (12 GA) ALLOWS USE OF AR CONFIGURED OPTICS AND MOUNTS Tactical stocks can also be ordered separately. #92280 High-Tube Telescoping Hydraulic SEE PREVIOUS PAGE FOR STOCK KIT CONTENTS. Recoil Stock Kit for Moss 500/590

#92180 M4 Carbine Stock Telescoping #92290 Hydraulic Recoil Stock (Mil-spec) High-Tube Telescoping Hydraulic HYDRAULIC RECOIL BUFFER Recoil Stock Kit for Rem 87 Takes the place of the receiver extension tube, converting the AR- 15 telescoping stock into a recoil-buffered stock assembly without further modification. The recoil buffer reduces up to 70% of felt recoil. Recoil-buffered versions are available for all three of the telescoping stock systems, or the recoil buffer can be purchased separately. The HIGH-TUBE TELESCOPING STOCK KITS AND ADAPTERS / 12 GAUGE recoil buffer accepts mil-spec dimensioned buttstocks. The Crosshair PART# ITEM PLATFORM TYPE RAIL RECOIL WEIGHT EXPORT MSRP hydraulic recoil buffer is CNC machined from 6061-T6 aluminum and HIGH-TUBE® TELESCOPING STOCK 95360 High-tube Telescoping Stock Rem 870 Adapter Only None - 21 oz NLR 110.00 meets the stringent standards of military and law enforcement users. Adapter Our basic kits include the adapter and all necessary installation 90630 High-tube Telescoping Stock Rem 870 Adapter w/Rail 9 1/2 IN - 25 oz NLR 180.00 hardware. No gunsmithing is required for installation. #92190 Adapter and Rail Kit Only Crosshair Hydraulic Recoil Buffer 95380 High-tube Telescoping Stock Kit Rem 870 Stock Kit None - 37 oz NLR 220.00 90500 High-tube Telescoping Stock Kit Rem 870 Stock Kit w/ 9 1/2 IN - 41 oz NLR 290.00 BUTT PADS, RECOIL BUFFERS AND ACCESSORIES Rail PART # ITEM PLATFORM STOCK STYLE WEIGHT EXPORT MSRP 95340 High-tube Telescoping Hydraulic Rem 870 Stock Kit None Hydraulic 46 oz NLR 345.00 92810 CAR Stock Lock Nut M4 Carbine Stocks - 1 oz License $6.00 Recoil Stock Kit 94120 AR Stock Wrench Bottle Opener - - 3 oz NLR 8.00 92290 High-tube Telescoping Hydraulic Rem 870 Stock Kit w/ 9 1/2 IN Hydraulic 50 oz NLR 415.00 Recoil Stock Kit Rail 91190 Push Button Sling Swivel for 1¼ in webbing - - 1 oz License 12.00 95350 High-tube Telescoping Stock Moss 500/590/ Adapter Only None - 18 oz NLR 120.00 Adapter Mav 88 90860 Trigger Pin Replacement Kit for Remington Rem 870/1100/1187 - 1 oz NLR 12.00 90620 High-tube Telescoping Stock Moss 500/590/ Adapter w/Rail 9 1/2 IN - 22 oz NLR 190.00 93310 Original ERGO Grip® Mesa Stock Adapters - 3 oz License 25.00 Adapter and Rail Mav 88 Only 95370 High-tube Telescoping Stock Kit Moss 500/590/ Stock Kit None - 34 oz NLR 230.00 95620 ERGO Flat Top Grip® Mesa Stock Adapters - 3 oz License 25.00 Mav 88 90490 High-tube Telescoping Stock Kit Moss 500/590/ Stock Kit w/ 9 1/2 IN - 38 oz NLR 300.00 91850 LimbSaver® Snap-on Recoil Pad for M4 Carbine Buttstocks M4 Carbine Stocks - 6 oz License 40.00 Mav 88 Rail 95330 High-tube Telescoping Hydraulic Moss 500/590/ Stock Kit None Hydraulic 44 oz NLR 355.00 93070 Receiver Extension Tube (Mil-spec) Mesa Stock Adapters M4 Carbine 4 oz License 40.00 Recoil Stock Kit Mav 88 92190 Crosshair Hydraulic Buffer (Mil-spec) Mesa Stock Adapters M4 Carbine 17 oz License 165.00 92280 High-tube Telescoping Hydraulic Moss 500/590/ Stock Kit w/ 9 1/2 IN Hydraulic 48 oz NLR 425.00 92180 M4 Carbine Telescoping Hydraulic Recoil Stock (Mil-spec) Mesa Stock Adapters M4 Carbine 28 oz License 180.00 Recoil Stock Kit Mav 88 Rail NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

12 | MESA TACTICAL #24 MESATACTICAL.COM | 13 LUCY® ADAPTER FOR 20 GA SLING RING™ SHOTGUN SHOTGUNS (REM 870) SLING MOUNTS

20 ga Rem 870 with 12GA Urbino Tactical Stock

With our new Sling Ring shotgun sling mounts, we’ve taken an old idea and made it better. The Sling Ring shotgun sling mount fits between the stock and the receiver of a tactical shotgun, providing a sturdy loop for the fitting of single-point or three-point slings featuring H&K style hooks or Magpul Paraclip™ attachment points. Unlike similar sling loops, Mesa Tactical Sling Ring shotgun sling mounts are cast steel, 20 GA TO 12 GA STOCK CONVERSION not aluminum nor MIM, and they have no sharp edges to catch on webbing or skin. They are available Mesa Tactical’s Lucy stock adapter dramatically increases the number and type of butt stocks that can be used for left-side or ambidextrous mount. Finally, they are priced attractively so agencies can afford to install with 20 gauge Remington 870 shotguns. Attached at the receiver in place of the standard 20 gauge stock, this them on every shotgun in the armory. cast steel adapter enables the use of any 12 gauge Remington 870 stock. There are many more options for the Lucy adapter, including Mesa Tactical’s Urbino Stocks, telescoping stock adapter kits and even the Hydraulic Buffer system.

LUCY ADAPTER FOR 20 GA SHOTGUNS (REM 870) PART # ITEM WEIGHT EXPORT MSRP 93890 Lucy Adapter for 20 GA Shotguns (Rem 870) 1 oz NLR $30.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

SLING RINGS

PART # ITEM PLATFORM MOUNT CALIBER EXPORT MSRP 92310 Sling Ring Shotgun Sling Mount Rem 870 Left 12 GA NLR $25.00 20 ga Rem 870 with a 12 GA factory stock #93890 LUCY™ 20 GA to 12 GA 92320 Sling Ring Shotgun Sling Mount for Rem 870 (12-GA, ambi) Rem 870 Ambi 12 GA NLR 25.00 Stock Adapter for Rem 870 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 14 | MESA TACTICAL #24 MESATACTICAL.COM | 15 ® SURESHELL ALUMINUM SHOTSHELL MOSSBERG 930 Our side mount shotgun SureShell Alumi- CARRIERS (SIDE MOUNT) num Shotshell Carriers for the Mossberg 930 substitute custom-made steel Chicago screws for the trigger pins. The mounting plate features a window over the shotgun THE BEST AND MOST DURABLE WEAPON MOUNTED serial number location, to make it easier for armorers to SHOTSHELL CARRIER AVAILABLE inventory their weapons. INNOVATIVE RUBBER FRICTION RETENTION SYSTEM SureShell Aluminum Shotshell Carriers for the Mossberg #93030 SOLIDLY HOLDS SHOTSHELLS IN PLACE Sureshell® aluminum carrier for 930 fit on the left side of the receiver only and will not Moss 930 (6-shell, 12-ga) MACHINED FROM 6061-T6 ALUMINUM interfere with the forend. HARD COAT ANODIZED MATTE BLACK MOUNTS VIA BRACKETS ATTACHED TO SHOTGUN OR VIA DRILLED AND TAPPED RECEIVER HOLES MIL-SPEC HARD COAT ANODIZED FOR A RUGGED FN SLP The mounting system for the SureShell carri- NON-GLARE FINISH er for the FN Self-loading Police shotgun is similar to that of the Mossberg 930, with two sets of Chicago MOST SURESHELL ALUMINUM SHOTSHELL CARRIERS screws in place of the two trigger pins. MOUNT DIRECTLY TO A SPECIFIED RECEIVER #90110 SureShell aluminum shotshell carriers for the FN SLP SureShell® Carrier for fit on the left side of the receiver only, and will not FN SLP (4-shell, 12-GA) interfere with the forend.

REMINGTON #90320 The Sureshell receiver mounting system for Remington SureShell Carrier for Remington 870 SURESHELL ALUMINUM SHOTSHELL CARRIERS (4 shell, 12-GA, left side) 870, 1100 and 11-87 shotguns uses a combination of steel PART # ITEM PLATFORM CALIBER SHELLS SIDE WEIGHT EXPORT MSRP fasteners threaded into a steel pin (at the rear) and paired REMINGTON Chicago screws (up front) for more secure attachment to 90320 SureShell Carrier Rem 870/1100/1187 12-GA 4 shell Left 7 oz NLR $65.00 the shotgun without the risk of pinching the receiver. The 90600 SureShell Carrier Rem 870 12-GA 4 shell Right 7 oz NLR 65.00 mounting plate even features a window over the shotgun 90210 SureShell Carrier Rem 870/1100/1187 12-GA 6 shell Left 8 oz NLR 70.00 serial number location, to make it easier for armorers to inventory their weapons. 90420 SureShell Carrier Rem 870/1100/1187 12-GA 8 shell Left 10 oz NLR 85.00 93230 SureShell Carrier Rem 870 20-GA 4 shell Right 7 oz NLR 65.00 93240 SureShell Carrier Rem 870/1100/1187 20-GA 4 shell Left 7 oz NLR 65.00 93250 SureShell Carrier Rem 870/1100/1187 20-GA 6 shell Left 9 oz NLR 70.00 MOSSBERG 91240 SureShell Carrier Moss 500/590/Mav 88 12-GA 4 shell Left 6 oz NLR 70.00 MOSSBERG #90390 SureShell Carrier for Moss 500/590 90390 SureShell Carrier Moss 500/590/Mav 88 12-GA 6 shell Left 8 oz NLR 75.00 The side mount system of our shotgun SureShell aluminum (6-shell, 12 GA, left side) 95160 SureShell Carrier Moss 500/590/Mav 88 20-GA 4 shell Left 6 oz NLR 70.00 shotshell carriers for the Mossberg 500/590 substitutes 95170 SureShell Carrier Moss 500/590/Mav 88 20-GA 6 shell Left 8 oz NLR 75.00 two custom-machined steel Chicago screws for the trigger 93020 SureShell Carrier Moss 930 12-GA 4 shell Left 6 oz NLR 70.00 pin. At the front of the mounting plate, custom retaining 93030 SureShell Carrier Moss 930 12-GA 6 shell Left 8 oz NLR 75.00 steel hardware is used with an elongated extractor screw FNH-USA and a machined key hole in the plate. 90110 SureShell Carrier FN SLP 12-GA 4 shell Left 6 oz NLR 70.00 90120 SureShell Carrier FN SLP 12-GA 6 shell Left 8 oz NLR 75.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS.

16 | MESA TACTICAL #24 MESATACTICAL.COM | 17 SURESHELL® ALUMINUM SHOTSHELL CARRIERS WITH RAIL

THE BEST AND MOST DURABLE WEAPON MOUNTED SHOTSHELL CARRIER AVAILABLE INNOVATIVE RUBBER FRICTION RETENTION SYSTEM SOLIDLY HOLDS SHOTSHELLS IN PLACE MACHINED FROM 6061-T6 ALUMINUM INTEGRATED PICATINNY RAIL FOR OPTICS OR SIGHTS HARD COAT ANODIZED MATTE BLACK #93000 MOUNTS VIA BRACKETS ATTACHED TO SHOTGUN OR VIA DRILLED AND TAPPED RECEIVER HOLES SureShell Carrier and Rail for Kel-Tec KSG (12-shell, 12-GA, Both Sides) FOUR AND SIX SHELL CONFIGURATIONS WITH MULTIPLE RAIL LENGTHS

#92130 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Mag Clamp (6-Shell, 12-GA, 20 in)

Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 #94560 #91630 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/ SureShell Carrier and Rail for Moss SureShell Carrier and Rail for Remington 870 rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes 930 (4-shell, 12-GA, 5 in) (6-shell, 12-GA, 5 inch) on top of the shotgun’s receiver.

#93630 #90870 SureShell Carrier and Rail for Moss 500 SureShell Carrier and Rail for Benelli M4 (6-shell, 12-GA, 5 in) (4-shell, 12-GA, 5 inch)

18 | MESA TACTICAL #24 MESATACTICAL.COM | 19 ® SURESHELL SHOTSHELL CARRIERS WITH RAILS / 12 GAUGE SURESHELL STOCK MOUNT PART # ITEM PLATFORM SHELLS SIDE WEIGHT LENGTH EXPORT MSRP REMINGTON SHOTSHELL CARRIERS 92160 SureShell Carrier & Rail Rem 870 4 shell Left 11 oz 5 in NLR $120.00 91630 SureShell Carrier & Rail Rem 870 6 shell Left 12 oz 5 in NLR 125.00 BENELLI STOCK MOUNT 92700 SureShell Carrier & Rail Rem 870 4 shell Left 13 oz 8½ in NLR 135.00 Our Stock Mount SureShell carriers fit on most Benelli pistol 92710 SureShell Carrier & Rail Rem 870 6 shell Left 14 oz 8½ in NLR 140.00 grip fixed stocks. The rugged stamped steel SureShell 92130 SureShell Carrier & Rail w/ Rem 870 6 shell Left 26 oz 20 in NLR 240.00 Magazine Clamp bracket replaces the stock’s sling loop and mounts four 91950 SureShell Carrier & Rail w/ Rem 870 6 shell Left 27 oz 20 in NLR 240.00 additional shells securely on the side of the stock (does not #91840 Barrel Clamp fit on Benelli M4 stocks, nor will this shell carrier fit on the Stock Mount SureShell Carrier for MOSSBERG Urbino Tactical stock). This assembly is also available with Benelli M1/M2 (4-shell, 12-GA) 93620 SureShell Carrier & Rail Moss 500/590 4 shell Left 9 oz 4¾ in NLR 105.00 an H&K style (dog leash) hook loop opposite the shell carrier 93630 SureShell Carrier & Rail Moss 500/590 6 shell Left 9 oz 4¾ in NLR 110.00 instead of the webbing loop. 94150 SureShell Carrier & Rail Moss 500/590 4 shell Left 10 oz 8¼ in NLR 120.00 94160 SureShell Carrier & Rail Moss 500/590 6 shell Left 10 oz 8¼ in NLR 125.00 94560 SureShell Carrier & Rail Moss 930 4 shell Left 9 oz 5 in NLR 105.00 94570 SureShell Carrier & Rail Moss 930 6 shell Left 9 oz 5 in NLR 110.00 SURESHELL ALUMINUM SHOTSHELL BENELLI CARRIERS FOR THE URBINO 91210 SureShell Carrier & Rail Ben M2 4 shell Left 8 oz 4½ in NLR 115.00 TACTICAL STOCK 91220 SureShell Carrier & Rail Ben M2 6 shell Left 9 oz 4½ in NLR 120.00 Urbino Tactical stocks with cheek risers can accept 90870 SureShell Carrier & Rail Ben M4 4 shell Left 8 oz 5½ in NLR 115.00 SureShell carriers secured right on to the cheekpieces 90880 SureShell Carrier & Rail Ben M4 6 shell Left 8 oz 5½ in NLR 120.00 themselves. As with our other SureShell products, these #90160 SureShell Carrier for Urbino Cheek Riser 90890 SureShell Carrier & Rail Ben M4 8 shell Left 11 oz 5½ in NLR 135.00 shell carriers feature all aluminum construction. 92000 SureShell Carrier & Rail Ben SuperNova 4 shell Left 8 oz 5½ in NLR 105.00 (4-shell, 12-GA, Left Side) 92010 SureShell Carrier & Rail Ben SuperNova 6 shell Left 10 oz 5½ in NLR 110.00 BERETTA 94200 SureShell Carrier & Rail Beretta 1301 Comp 4 shell Left 8 oz 5½ in NLR 115.00 M4 CARBINE STOCK MOUNT 94210 SureShell Carrier & Rail Beretta 1301 Comp 6 shell Left 9 oz 5½ in NLR 120.00 SURESHELL ALUMINUM SHOTSHELL 94260 SureShell Carrier & Rail Beretta 1301 4 shell Left 8 oz 3¼ in NLR 115.00 Tactical CARRIERS SureShell carriers are also available for the M4 CARBINE 94270 SureShell Carrier & Rail Beretta 1301 6 shell Left 9 oz 3¼ in NLR 120.00 Tactical stock (the kind that we supply with our telescoping stock KEL-TEC kits). Offered in four- and six-shell versions, these fit 93000 SureShell Carrier and Rail Kel-Tec KSG 12 shell Both 37 oz 13 in NLR 255.00 securely to standard M4 CARBINE style stocks from Mesa * SureShell Carriers for Remington 870 will also fit the Remington semi-automatics (except right-side carriers). Tactical as well as other suppliers. Though designed to be NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. installed on the right side of the stock, they can be inverted #93340 and installed on the left side if necessary. SureShell Carrier for M4 CARBINE Stock (4-shell, 12-GA, Right Side)

STOCK MOUNT SURESHELL SHOTSHELL CARRIERS / 12 GAUGE PART # ITEM PLATFORM SHELLS SIDE WEIGHT EXPORT MSRP 93340 SureShell Aluminum Carrier M4 Carbine Stock 4 shell Right 7 oz NLR $65.00 93350 SureShell Aluminum Carrier M4 Carbine Stock 6 shell Right 9 oz NLR 70.00 90140 SureShell Aluminum Carrier Urbino Riser 4 shell Right 7 oz NLR 65.00 90150 SureShell Aluminum Carrier Urbino Riser 6 shell Right 7 oz NLR 70.00 90160 SureShell Aluminum Carrier Urbino Riser 4 shell Left 7 oz NLR 65.00 90170 SureShell Aluminum Carrier Urbino Riser 6 shell Left 8 oz NLR 70.00 91840 Stock Mount SureShell Alum Carrier Benelli Stock (not M4) 4 shell - 8 oz NLR 55.00 91830 Stock Mount SureShell Alum Carrier Benelli Stock (not M4) 4 shell HK Hook 8 oz NLR 60.00 * This item includes an H&K style hook loop on the opposite side from the shell carrier instead of the standard 1 inch sling loop. NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 20 | MESA TACTICAL #24 MESATACTICAL.COM | 21 SURESHELL® HOOK & LOOP SURESHELL® SHOTSHELL CARRIERS POLYMER SHOTSHELL CARRIERS

Strong Hook & Loop for ultimate grip.

SHELL YOKE MADE FROM INJECTION MOLDED-GLASS FILLED NYLON; BRACKETS/RAILS ARE ALUMINUM. While Mesa Tactical’s development focus has long been on the needs of the professional tactical operator, we have LIGHTER WEIGHT THAN ALL ALUMINUM. nonetheless enjoyed some acceptance in the tactical competition community, especially Three Gun. In response SECURES TO LIGHTWEIGHT ALUMINUM BACKPLATES BY to a long expressed desire from Three Gun competitors for a quick-release version of our popular on-gun shell BRASS THREADED INSERTS. carriers, we’ve introduced Hook & Loop SureShell carriers. INNOVATIVE DUAL RUBBER FRICTION RETENTION SYSTEM RELIABLY HOLDS SHOTSHELLS IN PLACE. Hook & Loop SureShell carriers combine our SureShell Polymer carrier yoke with 3M SJ3572 hook fastener material AVAILABLE WITH OR WITHOUT MIL-STD-1913 (NATO laminated to a 3/32” Formex 94 substrate. This allows Hook & Loop SureShell carriers to be easily attached to and STANAG 4694) PICATINNY OPTICS RAIL. #94740 removed from surfaces, such as shotgun receivers and MOLLE vests, covered with mating loop material. SureShell Polymer Carrier for Remington 870 MOUNTS VIA BRACKETS ATTACHED TO SHOTGUN OR VIA (6-shell, 12-GA / left side) The Hook & Loop SureShell carriers are sold with adhesive backed 3M SJ3571 loop fastener that can be glued DRILLED AND TAPPED RECEIVER HOLES. directly to a shotgun receiver.

SURESHELL POLYMER SHOTSHELL CARRIERS HOOK & LOOP SURESHELL CARRIERS PART # ITEM PLATFORM CALIBER SHELLS SIDE LENGTH WEIGHT EXPORT MSRP REMINGTON

PART # ITEM PLATFORM CARRIER RAIL LENGTH EXPORT MSRP 94740 SureShell Polymer Carrier Rem 870/1100/1187 12-GA 6 shell Left 7 oz NLR $37.00 92590 SureShell Polymer Carrier for Hook & Loop Any 12 GA 1 x 6 shell - NLR $28.00 94830 SureShell Polymer Carrier w/Rail Rem 870/1100/1187 12-GA 6 shell Left 5 in 7 oz NLR 99.00 92600 SureShell Polymer Carrier for Hook & Loop (3 Pack) Any 12 GA 3 x 6 shell - NLR 67.00 MOSSBERG NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 94750 SureShell Polymer Carrier Moss 500/590/Mav 88 12-GA 6 shell Left 6 oz NLR 42.00 94760 SureShell Polymer Carrier Moss 930 12-GA 6 shell Left 8oz NLR 49.00 94880 SureShell Polymer Carrier w/Rail Moss 500/590/Mav 88 12-GA 6 shell Left 4¾ in 10 oz NLR 84.00 94890 SureShell Polymer Carrier w/Rail Moss 930 12-GA 6 shell Left 5 in 10 oz NLR 84.00 BENELLI 94920 SureShell Polymer Carrier w/Rail Ben SuperNova 12-GA 6 shell Left 5½ in 11 oz NLR 84.00 94930 SureShell Polymer Carrier w/Rail Ben M4 12-GA 6 shell Left 5½ in 11 oz NLR 94.00 94940 SureShell Polymer Carrier w/Rail Ben M2 12-GA 6 shell Left 4½ in 11 oz NLR 94.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 22 | MESA TACTICAL #24 MESATACTICAL.COM | 23 BARREL AND PICATINNY RAILS MAGAZINE CLAMPS

PROVIDES MOUNTING POINTS FOR LIGHTS, SLING MIL-STD-1913 PICATINNY RAILS ATTACHMENTS OR OTHER ACCESSORIES CNC MACHINED FROM 6061-T6 ALUMINUM CNC MACHINED FROM 6061-T6 ALUMINUM RECEIVER MOUNT AND SADDLE MOUNT STYLES AVAILABLE CAN BE USED TO MORE SECURELY SUPPORT AFTER MARKET MAGAZINE TUBE EXTENSIONS ALL NECESSARY MOUNTING HARDWARE IS INCLUDED

#92690 Mesa Tactical provides two methods for mounting Picatinny rails Barrel Clamp with Rail for to tactical shotguns. For Remington shotguns, we offer the Mesa Mossberg 930 (12-GA) The Mesa Tactical Magazine Clamp can be used to more securely Tactical Saddle Rail, which mounts to both sides of the receiver retain after market or factory magazine extensions, while at the and wraps around the top. Top mount rails work with Remington, same time offering flexible accessory mounting options near the Mossberg and Benelli shotguns that feature factory tapped rail #90770 mounting holes in the top of the receiver. Picatinny Rail for Mossberg 500/590 shotgun muzzle. Magazine clamps are available with a push-button (Standard Profile, 4 1/2 inch) quick release sling swivel or a two inch MIL-STD-1913 (NATO STANAG All Mesa Tactical Picatinny rails are machined from 6061-T6 air- 4694) Picatinny rail that can accept standard weapon light mounts. craft quality aluminum, and finished with mil-spec Type III hard The Magazine Clamp can also be used to mount one inch diameter anodizing. Mesa Tactical Picatinny rails include all necessary weapon lights simply by clamping one side to the shotgun barrel and mounting hardware. #90810 the other side to the light body (recommended for use with shotguns RECEIVER MOUNT PICATINNY RAILS Magazine Clamp with Rail for Rem 870 with tall front sight posts only). Receiver-mount rails are made to be mounted onto the receivers (weapon light not included) Our Barrel Clamp offers an accessory mount point for shotguns that of Remington, Mossberg, and Benelli shotguns with pre-drilled do not have extended magazines. Its unique clamping mechanism and tapped mounting holes. These rails can be used with custom ensures a secure fit even under recoil. drilled and tapped weapons. Mesa Tactical Magazine and Barrel Clamps can accept accessories made for Mesa Tactical Stock Adapters,including Mesa Tactical Adapter Mount Rails (see page 26). #90650 Magazine Clamp with Sling Swivel for Rem 870

BARREL AND MAGAZINE CLAMPS / 12 GAUGE The Picatinny optics rail for the Kel-Tec KSG features small aluminum PART # ITEM PLATFORM RAIL SWIVEL WEIGHT EXPORT MSRP flanges on either side of the main rail that can accept additional 90800 Magazine Clamp Remington - - 4 oz NLR $65.00 lengths of Picatinny rail to support weapon lights or targeting lasers 90650 Magazine Clamp Remington - Yes 4 oz NLR 75.00 (accessory rail not included, see immediately below). A pair of unique 90810 Magazine Clamp Remington Yes - 4 oz NLR 90.00 steel recoil blocks featuring angled set screws ensure the rail assem- 93920 Magazine Clamp Remington Yes Yes 3 oz NLR 100.00 bly is securely mounted to the shotgun. #94500 Picatinny Rail for Kel-Tec KSG 90700 Barrel Clamp Remington Yes - 3 oz NLR 90.00 (12-GA, 13 in, 18 in barrel) 92660 Magazine Clamp Mossberg 930 - - 4 oz NLR 65.00 92670 Magazine Clamp Mossberg 930 - Yes 4 oz NLR 75.00 92680 Magazine Clamp Mossberg 930 Yes - 4 oz NLR 90.00 93930 Magazine Clamp Mossberg 930 Yes Yes 3 oz NLR 100.00 92690 Barrel Clamp Mossberg 930 Yes - 3 oz NLR 90.00 NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. 24 | MESA TACTICAL #24 MESATACTICAL.COM | 25 ADAPTER MOUNT RAIL HARD WEAR

MESA TACTICAL LOGO & MESA TACTICAL LOGO & SHELLS SHORT SLEEVED TEE SHELLS SHORT SLEEVED TEE #93900 (White on Black) - (White on Army Green) - Adapter Mount Pic Rail for 50070 SM, 50071 MD, 50075 SM, 50076 MD, Rem 870 (12-GA, 9½ in) 50072 LG, 50073 XL, 50074 XXL 50077 LG, 50078 XL, 50079 XXL

ADAPTER MOUNT RAILS Adapter mount rails are designed to mount optics for use with High-tube telescoping stock adapters, or to mount accessories slightly away from the receiver when fastened to the telescoping stock adapter side accessory mount points. When used for optics, the elevation of the tall profile rails is similar to that of a flat top AR-15. MESA TACTICAL SMOKING GUN MESA TACTICAL SMOKING GUN SHORT SLEEVED TEE SHORT SLEEVED TEE (Black, Front and Back Print) - (Back Print) PICATINNY RAILS 50085 SM, 50086 MD, PART # ITEM PLATFORM LENGTH MOUNT LOCATION CALIBER CLAMP WEIGHT EXPORT MSRP 50087 LG, 50088 XL, 50089 XXL 90690 Picatinny Rail - 2 in Adapter, Clamp - - - 1 oz NLR $25.00 91130 Picatinny Rail - 3½ in Adapter, Clamp - - - 2 oz NLR 30.00 REMINGTON 92370 Picatinny Rail Rem 870/1100/1187 5 in Receiver Top 12-GA 2 oz NLR 35.00 92380 Picatinny Rail Rem 870/1100/1187 8½ in Receiver Top 12-GA 3 oz NLR 50.00 WEAR ’EM 93900 Adapter Mount Pic Rail** Rem 870 9½ in Adapter Top 12-GA - 13 oz NLR 70.00 PROUD! MOSSBERG 90770 Picatinny Rail Moss 500/590 4½ in Receiver Top 12-GA - 2 oz NLR 40.00 93910 Adapter Mount Pic Rail** Moss 500/590 9½ in Adapter Top 12-GA - 14 oz NLR 70.00 BENELLI 92390 Picatinny Rail Benelli M2 4½ in Receiver Top 12-GA - 2 oz NLR 45.00 92400 Picatinny Rail Ben Supernova 5½ in Receiver Top 12-GA - 3 oz NLR 45.00 KEL-TEC 94500 Picatinny Rail* Kel-Tec KSG 13 in Receiver Top 12-GA - 23 oz NLR 180.00 MESA TACTICAL LOGO & MESA TACTICAL PATCHES * For Kel-Tec KSG with 18 inch barrel. ** Adapter Mount rails are exclusively for use with Mesa Tactical High-Tube AR adapters. SHELLS SHORT SLEEVED TEE NO LICENSE REQUIRED FOR MOST INTERNATIONAL DESTINATIONS. (White on Charcoal) - 50080 SM, 50081 MD, 50082 LG, 50083 XL, 50084 XXL 26 | MESA TACTICAL #24 MESATACTICAL.COM | 27 CATALOG #1 NEW BLACK ROCK™ STOCKS & PYRAMID™ HANDGUARDS FOR AR-15 RIFLES AND CARBINES

PR0DUCED BY:

WWW.MESATAC.COM PRICES VALID FOR 90 DAYS AFTER JANUARY 1, 2019 PROFESSIONAL GRADE. After a decade and a half of producing innovative, rugged accessories for the tactical shotgun, we have expanded our attention to the tactical carbine, especially America’s most popular centerfire rifle platform, the AR-15. MESATAC™ will launch as a fresh identity to brand a new line of tactical accessories for carbines and rifles, with the same innova- tion, quality and attention to detail that has made Mesa Tactical’s shotgun stocks and shell carriers industry standards among professional operators. We are kicking off the new MESATAC marque with two lines of rifle and carbine furniture: (PG 5). + THE BLACK ROCK™ LINE OF STOCKS FOR AR-15 RIFLES AND CARBINES (PG 7). + THE PYRAMID™ LINE OF ALUMINUM AR-15 FLOATING HANDGUARDS In addition, the Mesa Tactical Faro® stock adapter for the FN SCAR carbine has been re-branded as a MESATAC accessory. Because MESATAC products are rifle accessories, all MESATAC branded CONTENTS: items require a license for export. MESATAC RIFLE PRODUCTS INTRODUCTION 1 FARO™ Stock Adapter for FN SCAR 2 BLACK ROCK™ Stocks for AR-15 Rifles and Carbines 5 PYRAMID™ Handguard for AR-15 Rifles and Carbines 7

WWW.MESATAC.COM STOCK ADAPTER FOR FN-SCAR

FEATURES: ADAPTS THE FN SCAR TO ACCEPT ANY AR-15 BUTT STOCK EXPANDS FN SCAR OWNERS AFTER MARKET BUTT STOCK OPTIONS #92550 MIRRORS AR-15 STOCK TO TOP RAIL HEIGHT FARO TELESCOPING STOCK ADAPTER FOR FN SCAR (BLACK) INTEGRAL AMBIDEXTROUS QD SLING ATTACHMENT POINTS MACHINED FROM INVESTMENT CAST ALUMINUM AVAILABLE IN BLACK AND FDE

The Faro Adapter is easy to install and requires no gunsmithing. Simply remove the factory stock, slide the adapter in its place, and then install any AR-15 buffer tube and stock. The Faro adapter #92570 includes ambidextrous QD sling attachment points. FARO TELESCOPING STOCK ADAPTER AND RECEIVER EXTENSION FOR FN SCAR (BLACK)

FARO® STOCK ADAPTERS FOR FN SCAR PART # ITEM WEIGHT EXPORT MSRP 92550 Faro Telescoping Stock Adapter for FN SCAR (Black) 7 oz License $65.00 92560 Faro Telescoping Stock Adapter for FN SCAR (FDE) 7 oz License 75.00 92570 Faro Telescoping Stock Adapter and Receiver Extension for FN SCAR (Black) 11 oz License 110.00 92580 Faro Telescoping Stock Adapter and Receiver Extension for FN SCAR (FDE) 11 oz License 120.00

WWW.MESATAC.COM 3 | MESATAC #1 ™ STOCKS FOR AR-15 RIFLES & CARBINES PART# ITEM PLATFORM STYLE BUTTPAD SLING EXPORT MSRP BLACK ROCK™ STOCKS FOR AR-15 RIFLES AND CARBINES 9590K Black Rock FC Fixed Carbine AR-15 Fixed Concave - License $70.00 Stock 9591K Black Rock FC Fixed Carbine AR-15 Fixed Concave Push License 90.00 Stock Button 9592K Black Rock FC Fixed Carbine AR-15 Fixed Convex - License 70.00 Stock 9593K Black Rock FC Fixed Carbine AR-15 Fixed Convex Push License 90.00 Stock Button 9594K Black Rock FR Rifle Stock AR-15 Fixed Concave - License 45.00

9595K Black Rock FR Rifle Stock AR-15 Fixed Concave Push License 65.00 Button 9596K Black Rock FR Rifle Stock AR-15 Fixed Convex - License 45.00

9597K Black Rock FR Rifle Stock AR-15 Fixed Convex Push License 65.00 Button 9598K Black Rock TC Telescoping AR-15 Tele- Concave - License 65.00 Carbine Stock scoping #9598K 9599K Black Rock TC Telescoping AR-15 Tele- Concave Push License 85.00 BLACK ROCK TC TELESCOPING Carbine Stock scoping Button CARBINE STOCK FOR AR-15 (CONCAVE BUTT, BLACK) 9600K Black Rock TC Telescoping AR-15 Tele- Convex - License 65.00 Carbine Stock scoping 9601K Black Rock TC Telescoping AR-15 Tele- Convex Push License 85.00 CONCAVE BUTTPAD HUGS THE SHOULDER; CONVEX BUTTPAD SLIDES IN AND OUT OF THE SHOULDER POCKET Carbine Stock scoping Button PART# ITEM PLATFORM STYLE EXPORT MSRP EASILY AND IS ½ INCH LONGER THAN THE CONCAVE BUTTPAD. BUTTPAD ASSEMBLIES 9602K Mesatac Buttpad Spacers Kit AR-15 Concave License 25.00 LOP OF FIXED STOCKS CAN BE MODIFIED BY COMBINING ANY OF THREE BUTT SPACERS (INCLUDED WITH 9603K Mesatac Buttpad Spacers Kit AR-15 Convex License 25.00 THE BLACK ROCK FC; AVAILABLE SEPARATELY FOR THE OTHER BLACK ROCK STOCKS). SLING ATTACHMENTS BLACK ROCK FC WITH CONCAVE BUTTPAD CAN BE CONFIGURED WITH LOPS OF 11¾ (NO BUTTPAD), 12¼, 96040 Footman's Loop for Mesatac AR-15 AR-15 - License 2O.00 stocks 12½, 12-7/8, 13, 13-3/8 OR 13-5/8 INCHES (CONVEX BUTTPAD IS ½ INCH LONGER) 96050 Lower Flush Cup for Mesatac AR-15 AR-15 - License 2O.00 stocks BLACK ROCK FR WITH CONCAVE BUTTPAD SHIPS WITH LOPS OF 13 (NO BUTTPAD) OR 13½ INCHES; AND CAN 96060 QD Sling Loop for Mesatac AR-15 stocks AR-15 QD Sling License 2O.00 Loop BE CONFIGURED WITH ADDITIONAL LOPS OF 13¾, 14-1/8, 14¼, 14-5/8 OR 14-7/8 INCHES WITH SEPARATELY 96070 Hook Loop for Mesatac AR-15 stocks AR-15 Hook License 2O.00 PURCHASED BUTTPAD SPACERS KIT (CONVEX BUTTPAD IS ½ INCH LONGER). Loop 96080 Strike Plate for Mesatac AR-15 stocks AR-15 - License 2O.00

The new Mesatac Black Rock series of AR-15 stocks is a complete line of rugged, stylish stocks that feature flexible buttpad and sling attachment options and striking appearance. Instead of simply producing yet another telescoping carbine stock, we designed a comprehensive line of stocks that can be installed as fixed or collapsing stocks on rifles or carbines.

5 | MESATAC #1 ™ HANDGUARD PYRAMID FOR AR-15

When Mesa Tactical decided to produce a floating handguard for the AR-15, we wanted to design something that was slim and comfortable and easy for agencies to adopt and install. These were the considerations behind our new line of Mesatac Pyramid aluminum handguards. It doesn’t hurt that they look great, too. The Pyramid handguards stay slim and smooth and lightweight by eschewing quad rails and instead employing M-LOK™ slots on sides and bottom. M-LOK slots don’t have sharp edges or burrs, and accept Picatinny rail sections where you need them, or specialized light mounts or vertical grips. The barrel nut can be installed without shimming, indexing or timing, so one Pyramid handguard is easy to install while installing multiple handguards in an armory environment is considerably simplified. The longer Pyramid handguards are design to stop PYRAMID™ FLOATING HANDGUARDS FOR AR-15 RIFLES AND CARBINES just sort of the muzzle device, so muzzle brakes and flash and sound suppressors can be PART# ITEM PLATFORM STYLE BUTTPAD SLING EXPORT MSRP removed and installed without taking off the handguard. PYRAMID HANDGUARD FOR AR-15 96170 Pyramid Floating Handguard AR-15 5.56 9 1/2 in M-LOK License $170

Handguard is machined from 6061-T6 aluminum, with an ASTM A311 steel barrel nut. 96190 Pyramid Floating Handguard AR-15 5.56 12 in M-LOK License 210 MIL-STD 1913 Picatinny accessory rail runs the full length of the top surface. 96210 Pyramid Floating Handguard AR-15 5.56 13 1/2 in M-LOK License 225 Industry standard M-LOK slots on sides and bottom can accept Picatinny rail sections 96230 Pyramid Floating Handguard AR-15 5.56 15 in M-LOK License 240 as well as other M-LOK mounts and accessories. 96250 Pyramid Floating Handguard AR-15 5.56 17 in M-LOK License 255 Requires removal of FSB and factory barrel nut, and installation of low-profile gas block (not included). Requires specialized armorers’ tools for installation. Barrel nut does not need to be shimmed, indexed or timed, so installation is simplified, especially on multiple rifles. - 9½ inch Pyramid handguard covers the carbine gas block. - 12 inch Pyramid handguard covers the mid-length gas block. - 15 inch Pyramid handguard covers a 16 inch barrel up to the muzzle device. - 17 inch Pyramid handguard covers an 18 inch barrel up to the muzzle device.

7 | MESATAC #1