Shotgun 192-207
Total Page:16
File Type:pdf, Size:1020Kb
BRILEY X-2 SCREW-IN SHOTGUN INDEX Brownells/CARLSON’S 3-GUN CHOKE TUBE SETS X-2 SCREW-IN CHOKE TUBE Choke Tubes ................... 192-194 Replacement Parts .............. 196-198 Extended Length, Competition Grade Three Different Constrictions So Tubes Improve Pattern & Accuracy Competition Gear ............. 205-206 Stocks ........................ 201-205 You’re Ready For Any Stage Of Competition Choke constrictions, from Cylinder Magazine Tubes & Parts ........ 198-201 Tactical Accessories ........... 206-207 to X-Full let you precisely match your Brownells partnered with Carl- load to the shooting conditions. Long tube extends beyond the Performance Parts .............. 194-196 son’s to develop a set of 12 gauge length of the muzzle, features highly polished interior for less pellet choke tubes specifically optimized deformation; reduced fliers and tighter patterns. Knurled grasping for 3-Gun competition. Having one SHOTGUN band speeds installation and removal. Choke constriction is marked of these sets in your range bag en- on band, no need to remove tube to verify size. ab sures you’re equipped with the exact SPECS: 17-4 stainless steel. Polished, bright finish. Extends beyond muz- constriction for any stage, from flying zle approx. .812" (20.6mm). Use with lead and bismuth shot. Steel shot BRILEY CHOKE TUBE SPEED WRENCH CARLSON’S CHOKE TUBE WRENCH clay pigeons to a troublesome marker next to a “no-shoot.” Each can be used with constrictions of Modified and larger. Beretta chokes will set includes Improved Cylinder for close-range targets, Modified for Speed & Leverage To Quickly Remove Tubes CARLSON’S UNIVERSAL WRENCH - Fits all of not fit guns with Optima choke thread. mid-range, and Full for long-distance. These tubes are designed to the most popular brands of choke tubes. Aluminum fingers accurately align the wrench ab throw tighter and denser patterns than conventional tubes, so be BROWNING INVECTOR SPECS: Steel, blued. 2" (5cm) long. 12 or 20 ga. only. inside the tube and hold the teeth in place. Crank sure to pattern your shotgun with the shotshell load you plan to use STK# 12 GA. STK# 20 GA. CHOKE handle quickly spins tubes in or out. Fits factory choke tubes #155-100-012AT 12 Ga. Univ. Choke Wrench, to be sure you know the results you’ll get with each of these tubes. #129-001-001AT #129-002-001AT Skeet and Briley X-2 tubes. (Not for Briley special thinwall tubes.) ab 5E13F40 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 14.99 Knurled rings give plenty of grasping surface for quick removal, and #129-001-002AT #129-002-002AT Imp Cyl SPECS: Plastic knob, aluminum fingers/handle, stainless steel #155-100-020AT 20 Ga. Univ. Choke Wrench, the constriction is laser marked on the end and body for easy refer- #129-001-003AT NA Lt Mod body. ence. Can be used with lead, steel, or Hevi-Shot. ab 5E13P40 � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.99 #129-001-004AT #129-002-004AT Mod #129-070-012AT 12 Gauge Tube Wrench, 9B26K58 � � � $ 28.99 SPECS: 17-4 stainless steel, matte black. 12 gauge only. Remington – #129-001-005AT NA Imp Mod #129-070-020AT 20 Gauge Tube Wrench, 9B26E58 � � � 28.99 CARLSON’S UNIVERSAL CHOKE TUBE WRENCH - Stronger, and a 2.875" (7.3cm) long. Fits most Remington shotguns. Winchester/Brown- lot easier on your choke tubes and your fingers, ing Invector/Mossberg – 2.35" (5.97cm) long. Fits Winchester, Browning #129-001-007AT NA Full S Invector, Mossberg 500, Weatherby, and Savage. Benelli Crio® Plus – E than a quarter. Fits virtually every choke tube — Advise # — 12/20 Ga. Inv. Choke Tube, 9B41I29 � � � � $ 43.99 slot. Includes key chain. 3.75" (9.525cm) long. Fits Benelli Crio Plus choke system, including Super 1 — Advise # — Beretta/Benelli Choke Tube, 9B41B29 � � 43.99 SPECS: Stainless steel, 2 /2" (6.3cm) long with 6" Black Eagle II, CrioTech M2 and other models. All models for 12 gauge TUB BIRCHWOOD CASEY chain. only. Do not use slugs, sabots, or rifled slugs in constrictions tighter than BROWNING INVECTOR PLUS E Improved Cylinder, and do not shoot steel shot larger than BB or any steel #155-103-000AT Universal Choke Wrench, 5E3N47 � � � � $ 4.99 load faster than 1,550 feet per second through the Full. STK# 12 GA. STK# 20 GA. CHOKE CHOKE TUBE LUBE #129-000-206AT #129-000-207AT Cylinder CARLSON’S SPORTING CLAYS SPEED WRENCH - #155-000-220AT Remington 3-Gun Choke Tube Set, Eliminates Stuck Choke Tubes, Barrel Damage Crank and handle provide both speed and leverage 5E88Q65 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99 #129-005-001AT #129-006-001AT Skeet CHOK Non-evaporating, metallic base, anti-seize lubricant prevents for quickly removing choke tubes. Large, easy-to- #155-000-219AT Winchester/Browning Invector/ #129-005-002AT #129-006-002AT Imp Cyl corrosion and galling caused by high pressure loads and extreme grip knob expands the vinyl, non-markingab gripping Mossberg 3-Gun Choke Tube Set, #129-005-003AT NA Lt Mod temperatures. ab surface that’s inserted into the tube. 5E88E65 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99 #129-005-004AT #129-006-004AT Mod 3 SPECS: A squeeze tube, net wt. /4 oz. (21 g). SPECS: Plastic knob. Aluminum shaft and handle. #155-000-221AT Benelli Crio Plus 3-Gun Choke Tube #129-005-005AT NA Imp Mod Set, 5E88C65 � � � � � � � � � � � � � � � � � � � � � � 89.99 #167-400-150AT Choke Tube Lube, 1K5I18 � � � � � � � � � � � � � $ 7.99 #155-102-020AT 20 Ga. S/C Speed Wrench, 5E16N01 � � $ 20.49 #129-005-006AT NA Lt Full - 3 or More - Choke Tube Lube, per each, 1K3H87 . $ 7.20 #155-102-012AT 12 Ga. S/C Speed Wrench, 5E16F01 � � 20.49 #129-005-007AT NA Full #129-005-008AT NA X-Full CARLSON’S — Advise # — Invector Plus Choke Tube, 9B41K29 � � � � $ 43.99 COLONIAL ARMS REMINGTON BRILEY BUCKSHOT CHOKE TUBES STK# 12 GA. STK# 20 GA. CHOKE CHOKE TUBE WRENCH SPECTRUM MACH 1 CHOKE TUBE Special Choke Tubes Give Tight #129-015-003AT NA Lt Mod A Quarter With Guts! Patterns With Buckshot #129-015-004AT #129-016-004AT Mod Competition Grade Tubes, Extra High Polish #129-015-005AT NA Imp Mod “Ears” give the leverage needed to unscrew tight choke tubes Interior Improves Pattern & Accuracy Steel choke tubes fit popular models damage-free. Good control for installation, too. Sized to fit Colonial of shotguns and give tight patterns with #129-015-007AT #129-016-007AT Full brand tubes; fits many others. Pocket-sized. ab Minimum gap geometry and high 00 and 000 buckshot. Chokes feature — Advise # — Remington Choke Tube, 9B41N29 � � � � � $ 43.99 1 1 SPECS: Steel. 2 /2" (6.3cm) l, 1 /4" (3.2cm) w, .059" (1.5mm) thick. resolution “RMS” interior finish gives ports to help tame the recoil and muzzle #198-100-001AT Choke Tube Wrench, 8A2G29 � � � � � � � � � $ 2.95 less pellet deformation; consistently jump produced by buckshot loads. Can be used with lead, steel and BERETTA & BENELLI 12 GAUGE tighter patterns. Choke constriction is Hevi-Shot. Not for use with any steel shot larger than BB or faster STK# BERETTA 12 GA. STK# BENELLI 12 GA. CHOKE laser marked on color coded band, no than 1550 fps. ab #129-025-001AT #129-025-001AT Skeet need to remove tube to verify size. Long SPECS: 17-4 heat treated steel. Matte black finish. #129-025-002AT #129-025-002AT Imp Cyl tube with hidden wrench slots extends beyond the length of the #155-000-225AT Rem Choke Buckshot Choke, #129-025-003AT #129-025-003AT Lt Mod muzzle. Knurled grasping band speeds installation and removal. ab 5E41H62 � � � � � � � � � � � � � � � � � � � � � � � � � $ 47.95 SCREW-IN #129-025-005AT #129-025-005AT Imp Mod SPECS: 17-4 stainless steel. Polished bright finish. Extends beyond muzzle #155-000-226AT Beretta//Benelli Mobil Choke CHOKE ADAPTER approximately .812" (20.6mm). Use with lead and bismuth shot. Steel Buckshot Choke, 5E41N62� � � � � � � � � 47.95 #129-025-006AT #129-025-006AT Lt Full shot can be used with constrictions of Modified and larger. Available to — Advise # — 12/20 Ga. Inv. Choke Tube, 9B41I29 � � � � $ 43.99 fit Browning Invector Plus and Beretta/Benelli. #155-000-227AT Win-Choke Buckshot Choke, Lets “Too-Thin” Barrels Accept Win- 5E41H62 � � � � � � � � � � � � � � � � � � � � � � � � � 47.95 — Advise # — Beretta/Benelli Choke Tube, 9B41B29 � � 43.99 ® Choke -Style Tubes STK# INVECTOR STK# BERETTA/ CHOKE GAUGE If a barrel is too thin to tap for screw-in choke tubes or it’s PLUS BENELLI chrome-lined (eats reamers/taps), or if the end has been bulged, #129-000-019AT #129-000-055AT Skeet 12 3 you can install screw-in tubes. Simply turn the last /4" of barrel to #129-000-020AT #129-000-056AT Imp Cyl 12 ® ™ dimension in chart and solder adapter in place. ab #129-000-021AT #129-000-057AT Lt Mod 12 WIN-CHOKE or TRU-CHOKE -STYLE TUBES, WHICH SHOULD I THREAD BARRELS FOR? 1 SPECS: Alloy steel. 2 /2" (6.3cm) lg. 12 Ga. .867" (22mm) O.D. Accepts #129-000-022AT #129-000-058AT Mod 12 Win-Choke®-style tubes (Colonial “Invisible” Tubes). Maximum bore di- Win-Choke®-style tubes are thicker and generally more available. Tru-Choke™ Standard-style tubes are thinner, and the ameter .735". #129-000-023AT #129-000-059AT Imp Mod 12 Tru-Choke™ Thinwall-style tubes thinner yet, so a far wider range of barrels can be threaded to accept them. But, they are less #129-000-024AT NA Lt Full 12 available. Ideally, you would have tooling for all three styles and thread barrels for: Win-Choke®-style tubes when they are thick STOCK # THREAD FITS BBL TURNED TO GAUGE #129-000-025AT NA Full 12 enough; Tru-Choke™ Standard-style on thinner barrels; Tru-Choke™ Thinwall-style tubes on the thinnest 12 ga. side-by-side and #514-132-795AT .812"-32 .795 12 #129-000-026AT NA X-Full 12 over-under barrels.